ZH
RU
ES

be stronger

be stronger, Total:317 items.

In the international standard classification, be stronger involves: Pharmaceutics, Measurement of volume, mass, density, viscosity, Furniture, Road vehicle systems, Products of the textile industry, Iron and steel products, Passenger cars. Caravans and light trailers, Fasteners for aerospace construction, Small craft, Chipless working equipment, Vocabularies, Fasteners, Terminology (principles and coordination), Paper products, Tobacco, tobacco products and related equipment, Electrical accessories, Welding, brazing and soldering, Internal combustion engines, Equipment for children, Radiocommunications, Adhesives, Hand-held tools, Construction materials, Internal combustion engines for road vehicles, Reinforced plastics, Glass, Inorganic chemicals, Materials for aerospace construction, Plastics, Ceramics, Civil engineering in general, Earthworks. Excavations. Foundation construction. Underground works, Electrical and electronic testing, Alarm and warning systems, Air quality, Paper and board, Acoustics and acoustic measurements, Open systems interconnection (OSI), Geology. Meteorology. Hydrology, Solar energy engineering, Electromechanical components for electronic and telecommunications equipment, Insulating materials, Telecontrol. Telemetering, Surface treatment and coating, Testing of metals, Powder metallurgy, Products of the chemical industry, Applications of information technology, Pumps, Gears, Test conditions and procedures in general, Shipbuilding and marine structures in general, Milk and milk products, Telecommunications in general.

Professional Standard - Agriculture, be stronger

GB 10772-1989 Fortified foods for infants and young children Iron-fortified candies
GB 10771-1989 Fortified food for infants and young children Calcium-fortified biscuits
1776药典化学药和生物制品卷-2010 Chapter 29 Pediatric Drugs Section 2 Pediatric Drug Application 1. Pediatric Pharmacokinetic Characteristics
1772药典化学药和生物制品卷-2010 Chapter 29 Pediatric Drugs Section 1 Drug Application in Newborns 1. Pharmacokinetic characteristics of newborns

NZ-SNZ, be stronger

AS/NZS 4867.2:2002 Cigarette Lighters Part 2: Child Resistance Requirements

SE-SIS, be stronger

SIS SS 83 95 06-1979 Children's dining stools — Determination of strength
SIS 83 95 06-1972 Children's dining stools. Determination of strength
SIS SS 94 21 02-1980 Electrical installations in nursery schools - Socket outlets and other connection points for electrical supply and telecommunication
SIS SEN 24 50 10-1971 Crimped joints Electrical connections with limited tensile strength for copper conductors General requirements and testing

Danish Standards Foundation, be stronger

DS 2172:1981 Furniture. Children's dining stools. Determination of strength
DS/EN 50205:2003 Relays with forcibly guided (mechanically linked) contacts
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS 1113:1989 Corrugated sheets of fibre reinforced cement for roofing. Requirements, including point load and impact load
DS/EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics

Standard Association of Australia （SAA）, be stronger

AS 2224.2:1986 Medicine measures (including paediatric droppers) - Plastics - For domestic use
AS 2224.1:1986 Medicine measures (including paediatric droppers) - Glass - For general use
AS 4133.4.1:1993/Amdt 1:1994
AS 4133.4.1:2007 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of point load strength index

PL-PKN, be stronger

PN M69782-1974 Shearing strength test of spot weld
PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method

Society of Automotive Engineers (SAE), be stronger

SAE AS954D-1988 WRENCHES, HAND TWELVE POINT HIGH STRENGTH, THIN WALL
SAE AS954E-2004 Wrenches, Hand Twelve Point High Strength, Thin Wall
SAE AS954E-1994 Wrenches, Hand Twelve Point High Strength, Thin Wall
SAE AS6405-2021 Ratcheting Wrenches, Twelve Point, High Strength, Thin Wall
SAE AS954H-2023 Wrenches, Hand, Twelve Point, High Strength, Thin Wall
SAE AS954G-2011 Wrenches, Hand, Twelve Point, High Strength, Thin Wall
SAE J450-2002 Use of Terms Yield Strength and Yield Point
SAE AS955-2012 Metric Sockets, Wrenches, Hand Twelve Point, High Strength, Thin Wall
SAE MA4535-1995 Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric
SAE MA4535-2004 Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric

American Welding Society (AWS), be stronger

WRC 384:1993 Improving Steel Spot Weld Fatigue Resistance

Professional Standard - Light Industry, be stronger

QB/T 5868-2023 Children's chairs—Test methods for the determination of stability, strength and durability

International Organization for Standardization (ISO), be stronger

ISO 13216-4:2020 Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 4: Lower tether anchorages
ISO 14590:1999 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
ISO 14590:2005 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
ISO 14590:2016 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
ISO 13216-2:2004 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 2: Top tether anchorages and attachments
ISO 13216-1:1999 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO/IEC 14476-3:2008 Information technology - Enhanced communications transport protocol: Specification of duplex multicast transport
ISO/IEC 14476-1:2002 Information technology - Enhanced communications transport protocol: Specification of simplex multicast transport
ISO/IEC 14476-5:2008 Information technology - Enhanced communications transport protocol: Specification of N-plex multicast transport
ISO 12986-1:2000 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by a three-point method
ISO 12986-1:2014 Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by the three-point method
ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 11093-6:1996 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 9614-1:1993 Acoustics; determination of sound power levels of noise sources using sound intensity; part 1: measurement at discrete points
ISO/IEC 14476-2:2003 Information technology - Enhanced communications transport protocol: Specification of QoS management for simplex multicast transport
ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics
ISO 10300-2:2001 Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting)
ISO 10350-2:2001 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics

Korean Agency for Technology and Standards (KATS), be stronger

KS R ISO 13216-1-2015(2020) Road vehicles－Anchorages in vehicles and attachments to anchorages for child restraint systems－Part 1：Seat bight anchorages and attachements
KS R ISO 13216-2-2008(2018) Road vehicles－Anchorages in vehicles and attachments to anchorages for child restraint systems－Part 2：Top tether anchorages and attachments
KS K 0742-2011 Test method for geogrid junction strength
KS K 0742-2015 Standard test method for individual geogrid junction strength
KS R 0088-2008 Strength of seats and of seat anchorages for passenger cars
KS R 0088-1988 Strength of seats and of seat anchorages for passenger cars
KS R ISO 13216-2:2008 Road vehicles－Anchorages in vehicles and attachments to anchorages for child restraint systems－Part 2：Top tether anchorages and attachments
KS R ISO 13216-2-2023 Installation of fixed points and main fixed points of child restraint systems in road vehicles in the vehicle Part 2: Top-tethered fixed points and their connections
KS R 0088-2008(2018) Strength of seats and of seat anchorages for passenger cars
KS B 7381-2013 Small sized forced air-cooled spark ignition engines for land use
KS R ISO 13216-1:2005 Road vehicles-Anchorages in vehicles and attachments to anchorages for child restraint systems-Part 1:Seat bight anchorages and attachements
KS R ISO 13216-1:2015 Road vehicles－Anchorages in vehicles and attachments to anchorages for child restraint systems－Part 1：Seat bight anchorages and attachements
KS R 0103-1994 Passenger car-seat belt anchorages-position and strength of mounting
KS R 0103-2008 Passenger car-seat belt anchorages－Position and strength of mounting
KS R 0103-2004 Passenger car-seat belt anchorages－Position and strength of mounting
KS R 4074-2008(2018) Passenger car－Seat belt anchorages－Position and strength of mounting
KS M 3712-2002 TESTING METHOD FOR APPARENT INTERLAMINAR SHEAR STRENGTH OF CARBON FIBER REINFORCED PLASTICS BY THREE POINT LOADING METHOD
KS M 3712-1992(1997) TESTING METHOD FOR APPARENT INTERLAMINAR SHEAR STRENGTH OF CARBON FIBER REINFORCED PLASTICS BY THREE POINT LOADING METHOD
KS B 7381-2006(2011) Small sized forced air-cooled spark ignition engines for land use
KS F 2325-2002 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS F 2325-1982 Testing method for flexural strength of soil－cement using simple beam with third point loading
KS X ISO/IEC 14476-1:2014 Information technology — Enhanced communications transport protocol — Part 1: Specification of simplex multicast transport
KS X ISO/IEC 14476-3:2014 Information technology — Enhanced communications transport protocol — Part 3: Specification of duplex multicast transport
KS X ISO/IEC 14476-5:2014 Information technology — Enhanced communications transport protocol — Part 5: Spcification of N-plex multicast transport
KS X ISO/IEC 14476-1:2004 Information technology-Enhanced communications transport protocol:Specification of simplex multicast transport
KS X ISO/IEC 14476-3:2009 Information technology-Enhanced communications transport protocol-Part 3:Specification of duplex multicast transport
KS F 2408-1995 Method of test for flexural strength of concrete(Using simple beam with third-point loading)
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS F 2325-2002(2017) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 12986-1:2004 Carbonaceous materials used in the production of aluminium-Prebaked anodes and cathode blocks-Part 1:Determination of bending/shear strength by a three-point method
KS M ISO 12986-1:2013 Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method
KS X ISO/IEC 10536-1:2002 Identification cards-Contactless integrated circuit(s) cards-Close-coupled cards-Part 1:Physical characteristics
KS B ISO 2858:2004 End-sunction centrifugal pumps(rating 16 bar)-Designation, nominal duty point and dimensions
KS I ISO 9614-1:2004 Acoustics-Determination of sound power levels of noise sources using sound intensity-Part 1:Measurement at discrete points
KS F 2407-1968(1995) TESTING METHOD FOR FLEXURAL STRENGTH OF CONCRETE (USING SIMPLE BEAM WITH CENTER-POINT LOADING)
KS F 2325-2002(2022) Testing method for flexural strength of soil－cement using simple beam with third point loading
KS I ISO 9614-1:2014 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
KS B ISO 2858:2013 End-sunction centrifugal pumps(rating 16 bar)－Designation, nominal duty point and dimensions
KS M ISO 10350-2:2012 Plastics－Acquisition and presentation of comparable single-point data－Part 2：Long-fibre-reinforced plastics
KS M ISO 10350-2-2012(2022) Plastics－Acquisition and presentation of comparable single-point data－Part 2：Long-fibre-reinforced plastics
KS I ISO 9614-1:2020 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
KS C IEC 61810-3:2020 Electromechanical elementary relays — Part 3: Relays with forcibly guided (mechanically linked) contacts
KS M ISO 10350-2-2012(2017) Plastics－Acquisition and presentation of comparable single-point data－Part 2：Long-fibre-reinforced plastics

British Standards Institution (BSI), be stronger

BS ISO 13216-2:2005 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Top tether anchorages and attachments
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 13216-1:2000 Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Seat bight anchorages and attachments
BS ISO 11093-6:2007 Paper and board - Testing of cores - Determination of bending strength by the three-point method
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
BS ISO 13216-4:2020 Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Lower tether anchorages
BS EN ISO 10350-2:2011 Plastics. Acquisition and presentation of comparable single-point data. Long-fibre-reinforced plastics
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS EN ISO 10350-2:2020 Plastics. Acquisition and presentation of comparable single-point data - Long-fibre-reinforced plastics
BS EN ISO 2858:1993 End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions
BS EN ISO 2858:2010 End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions
BS EN 61810-3:2015 Electromechanical elementary relays. Relays with forcibly guided (mechanically linked) contacts
BS ISO 10300-2:2014 Calculation of load capacity of bevel gears. Calculation of surface durability (pitting)
14/30288711 DC BS EN ISO 1288-3. Glass in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four-point bending)
BS ISO 14590:2016 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS EN ISO 9614-1:2009 Acoustics.Determination of sound power levels of noise sources using sound intensity. Part 1: Measurement at discrete points
BS ISO 23305:2020 Fortified milk powders, infant formula and adult nutritionals. Determination of total biotin by liquid chromatography coupled with immunoaffinity column clean-up extraction
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending

SAE - SAE International, be stronger

SAE AS954F-2011 Wrenches@ Hand@ Twelve Point@ High Strength@ Thin Wall
SAE J450-1991 Use of Terms Yield Strength and Yield Point
SAE J450-1984 Use of Terms Yield Strength and Yield Point
SAE J450-2017 Use of Terms Yield Strength and Yield Point
SAE J450-1996 Use of Terms Yield Strength and Yield Point
SAE MA4535A-2013 Wrenches@ Box and Open End Combination Twelve Point@ High Strength@ Thin Wall@ Metric

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, be stronger

GB/T 26087-2010 Small craft.Anchoring,mooring and towing.Strong points
GB/T 16939-1997 High strength bolts for joints of space grid structures
GB/T 16939-2016 High strength bolts for joints of space grid structures
GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method
GB/T 19467.2-2004 Plastics-Acquisition and presentation of comparable single-point data-Part 2:Long-fibre-reinforced plastics

Military Standard of the People's Republic of China-General Armament Department, be stronger

GJB 2080-1994 General measurement method of field strength at receiving point
GJB 130.3-1986 Test method for strength of glued aluminum honeycomb core nodes
GJB 7956-2012 Measurement method for strength and distribution of submarine echo highlight

Group Standards of the People's Republic of China, be stronger

T/ZZB 0358-2018 High strength and precision straight sided single or two-point mechanical power presses
T/CSCS 043-2023 Large diameter high strength bolts for bolt ball joints
T/CSCS 11-2021 Octagonal High Strength Bolts and Sockets for Bolt Ball Joints
T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/SSMT 5-2021 Differential data format for Precise Point Positioning (PPP) and PPP-RTK

(U.S.) Ford Automotive Standards, be stronger

FORD FLTM BA 013-04-2000 RESISTANCE SPOT WELDABILITY TESTS FOR HIGH STRENGTH STEELS

CENELEC - European Committee for Electrotechnical Standardization, be stronger

EN 50205:1997 Relays with Forcibly Guided (Linked) Contacts
EN 50205:2002 Relays with Forcibly Guided (Mechanically Linked) Contacts

Professional Standard - Coal, be stronger

MT 170-1987 Method for determination of point load strength of coal and rock

KR-KS, be stronger

KS R 0088-2008(2023) Strength of seats and of seat anchorages for passenger cars
KS R 4074-2008(2023) Passenger car－Seat belt anchorages－Position and strength of mounting
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS I ISO 9614-1-2020 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
KS C IEC 61810-3-2020 Electromechanical elementary relays — Part 3: Relays with forcibly guided (mechanically linked) contacts

American Society of Mechanical Engineers (ASME), be stronger

ASME B5.52-2003 Power Presses: General Purpose, Single-Point Gap Type
ASME SEC VIII D2 MA APP 8-2001 Appendix 8 - Mandatory Rounded Indications Charts Acceptance Standard for Radiographically Determined Rounded Indications in Welds
ASME SEC VIII D3 MA APP 6-2002 Appendix 6 - Mandatory Rounded Indications Charts Acceptance Standard for Radiographically Determined Rounded Indications in Welds
ASME SEC VIII D1 MA APP 4-2001 Appendix 4 Rounded Indications Charts Acceptance Standard for Radiographically Determined Rounded Indications in Welds

API - American Petroleum Institute, be stronger

API REPORT 81-40-1982 Chord Stress Effects on the Ultimate Strength of Tubular Joints
API REPORT 07714-CAP-1998 Strength of Simple Joints - Effect of Chord Stress and Diameter-to-Thickness Ratio on the Static Strength of DT Tubular Joints Loaded in Brace Compression

IN-BIS, be stronger

Association Francaise de Normalisation, be stronger

NF Q34-021:2000 Articles pour usages sanitaires et domestiques - Articles d'hygiène infantile : changes complets pour bébés et produits similaires à usage unique - Fermetures auto-agrippantes : détermination de la résistance à la traction longitudinale
NF ISO 13216-1:2000 Véhicules routiers - Ancrages dans les véhicules et attaches aux ancrages pour systèmes de retenue pour enfants - Partie 1 : ancrages près de la jonction dossier-coussin d'assise et attaches
NF C45-330:2002 Relays with forcibly guided (mechanically linked) contacts.
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF S31-100-1:1995 Acoustics. Determination of sound power levels of noise sources using sound intensity. Part 1 : measurement at discrete points.
XP Q35-006*XP ISO 11093-6:1997 Paper and board. Testing of cores. Part 6 : determination of bending strength by the three-point method.
NF C93-400-16-3*NF EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3 : mechanical tests on contacts and terminations - Test 16c : contact-bending strength
NF T50-062-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2 : long-fibre-reinforced plastics.

AT-ON, be stronger

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.
ONORM C 9720 Teil.4-1983 Reinforced plastics; Laminates of glassfibre reinforced reaction resin Systems; Characteristics and test methods

American Society for Testing and Materials (ASTM), be stronger

ASTM E2187-02b Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-02 Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-02a Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-16 Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-04 Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM D2584-08 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM E2187-20 Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E2187-20a Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM D5731-16 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
ASTM C363/C363M-16 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
ASTM D5731-07 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
ASTM D5731-08 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
ASTM D5731-02 Standard Test Method for Determination of the Point Load Strength Index of Rock
ASTM D5731-05 Standard Test Method for Determination of the Point Load Strength Index of Rock
ASTM C363/C363M-09 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
ASTM C363/C363M-09(2015) Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
ASTM C1505-01 Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM C1505-01(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM C282-10(2015) Standard Test Method for Acid Resistance of Porcelain Enamels(Citric Acid Spot Test)
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C78/C78M-18 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-21 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
ASTM C78-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C293-00 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C78/C78M-15a Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15b Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C293-07 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C78-07 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C293-94 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C293-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C293/C293M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

RO-ASRO, be stronger

STAS 5540/4-1986 TESTS OF BUTT WELOED .IOINTS Notch impact test

Association of German Mechanical Engineers, be stronger

DVS 2709-1983 Resistance spot welded samples for the determination of the fatigue strength
DVS 2935-1-2004
DVS 2935-2001
DVS 2935-1990

Lithuanian Standards Office , be stronger

LST EN 50205-2003 Relays with forcibly guided (mechanically linked) contacts
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST ETS 300 764 Leid.1-2006 Digital Enhanced Cordless Telecommunications (DECT);Global System for Mobile communications (GSM);DECT/GSM Interworking Profile (IWP);Implementation of short message service, point-to-point and cell broadcast
LST EN 60512-16-3-2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008)

Professional Standard - Aerospace, be stronger

QJ 1370-1988 Specification for measurement of ignition pressure of solid rocket motors

International Telecommunication Union (ITU), be stronger

ITU-R F.1762-2006 Characteristics of enhanced applications for high frequency (HF) radiocommunication systems
ITU-T X.608-2007 Information technology Enhanced communications transport protocol: Specification of N-plex multicast transport Study Group 17

TR-TSE, be stronger

TS 3284-1979 Flexnral Strength Of Concrete (Using Simple Beam With Third-Point Loading)
TS 3285-1979 Flexural Strength Of Concrete (Using Simple Beam With Center Point Loading)

Japanese Industrial Standards Committee (JISC), be stronger

JIS K 6849:1994 Testing methods for tensile strength of adhesive bonds
JIS K 6853:1994 Testing methods for cleavage strength of adhesive bonds
JIS K 6856:1994 Testing methods for flexural strength of adhesive bonds
JIS D 5202:1998 Automotive parts -- Distributors and ignition coils -- High-tension connections and low-tension connections
JIS K 6855:1994 Testing methods for impact shear strength of adhesive bonds
JIS K 7078:1991 Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method
JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS K 6851:1994 Testing methods for tensile shear strength of wood-to-wood adhesive bonds

Taiwan Provincial Standard of the People's Republic of China, be stronger

CNS 1234-1984 Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-point Loading)
CNS 1233-1984 Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third-point Loading)
CNS 12297-1988 Method of Test for Low Frequency (Below 3 MHz) Electrical Connectors (TP-15 Contact Strength)

RU-GOST R, be stronger

GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST 27034-1986 Sintered hard metals. Method of compression and yield strength determination
GOST 30457-1997 Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method

Shanghai Provincial Standard of the People's Republic of China, be stronger

DB31/ 329.6-2006 Safety technology prevention system requirements for important parts of key units Part 6: Schools, kindergartens
DB31/T 329.6-2019 Safety technology prevention system requirements for important parts of key units Part 6: Primary and secondary schools, kindergartens, and nursery institutions

German Institute for Standardization, be stronger

DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN 50205:2003 Relays with forcibly guided (mechanically linked) contacts; German version EN 50205:2002
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51902:2009 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2009 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN EN 60512-16-3:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008 / Note: DIN IEC 60512-8 (1994-05) rema...
DIN ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN EN 60512-16-3:2009 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008
DIN 65673:1999 Aerospace - Fibre reinforced plastics - Description of yarn, fabric and prepreg defects
DIN EN 60512-16-20:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations; section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IEC 6
DIN EN ISO 10350-2:2020-11 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020); German version EN ISO 10350-2:2020
DIN EN ISO 9614-1:2009-11 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993); German version EN ISO 9614-1:2009

European Committee for Standardization (CEN), be stronger

EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN ISO 11105:2020 Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:2020)
EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN ISO 10350-2:2020 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020)
EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics
EN ISO 11105:1997 Small Craft - Ventilation of Petrol Engine and/or Petrol Tank Compartments ISO 11105: 1997

Indonesia Standards, be stronger

SNI 4431-2011 Cara uji kuat lentur beton normal dengan dua titik pembebanan
SNI 4154-2014 Standard test method for flexural strength of concrete (using simple beam with center-point loading)

国家市场监督管理总局、中国国家标准化管理委员会, be stronger

GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method

Professional Standard - Post and Telecommunication, be stronger

YD/T 2486-2013 Enhanced Multi-Service Transport Node (MSTP) Equipment Technical Requirements

工业和信息化部, be stronger

JB/T 13751-2020 Test method for compressive strength of brushes and contacts for micromotors

American Gear Manufacturers Association, be stronger

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
AGMA 2003-C10-2010 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth

AGMA - American Gear Manufacturers Association, be stronger

932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears

Jiangsu Provincial Standard of the People's Republic of China, be stronger

DB32/ 1691.3-2014 Key Units (Parts) Public Security Technical Prevention System Construction Specifications Part 3: Schools, Kindergartens

AENOR, be stronger

UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE 22950-5:1996 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 5: POINT LOAD TEST.
UNE-ISO 11093-6:2017 Paper and board. Testing of cores. Part 6: Determination of bending strength by the three-point method

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, be stronger

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

TH-TISI, be stronger

TIS 2540-2011 Positive ignition engined vehicles:safety requirements;emission from englne, level 8

HU-MSZT, be stronger

MSZ 9247/5-1986

FI-SFS, be stronger

SFS 4178-1978

IT-UNI, be stronger

UNI 5715-1975
UNI 5716-1975
UNI EN ISO 10350-2:2020 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics

中国气象局, be stronger

QX/T 344.3-2020 Satellite remote sensing fire monitoring methods Part 3: Estimation of fire intensity

WRC - Welding Research Council, be stronger

BULLETIN 384-1993 IMPROVING STEEL SPOT WELD FATIGUE RESISTANCE: STUDY I: EFFECT OF TEMPER CYCLE@ MECHANICAL TREATMENTS@ WELD GEOMETRY AND WELDING CONDITIONS ON SHEET STEEL SPOT WELD FATIGUE RESISTANCE ; STUDY II: EFFE

American National Standards Institute （ANSI), be stronger

ANSI/ASTM D6272:2000 Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

European Telecommunications Standards Institute (ETSI), be stronger

ETSI TS 101 863-5-2001 Digital Enhanced Cordless Telecommunications (DECT); DECT/UMTS Interworking Profile (IWP); Part 5: SMS Point-to-Point and Cell Broadcast (V1.1.1)

ETSI - European Telecommunications Standards Institute, be stronger

TS 101 863-5-2001 Digital Enhanced Cordless Telecommunications (DECT); DECT/UMTS Interworking Profile (IWP); Part 5: SMS Point-to-Point and Cell Broadcast (V1.1.1)
ETSI EN 301 678:1999 Digital Enhanced Cordless Telecommunications (DECT); Cordless Terminal Mobility (CTM); Feature Package 2 (FP2); Short Message Service (SMS) Profile Point to Point (PP) (V1.0.5)

CZ-CSN, be stronger

CSN 67 0534-2-1992 Anorganic pigments. Determination of colour strength of colour pigments. Part 2: "One-point" methods
CSN 69 0010-4.21 ZZ1-2000
CSN 01 4686 Cast.5-1988 Calculation of load capacily of spur and bcvcl gcars.lindurance pitting rcsistancc and slrength numbers and material qualities

YU-JUS, be stronger

JUS N.R4.461-1990 Electromechanicai components for electronic equipment. Test methods. Test 16c: Contact bending strength

CEN - European Committee for Standardization, be stronger

EN ISO 11105:2017 Small craft - Ventilation of petrol engine and/or petrol tank compartments

(U.S.) Telecommunications Industries Association , be stronger

TIA TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

TIA - Telecommunications Industry Association, be stronger

TSB62-13-2000 ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending

Professional Standard - Chemical Industry, be stronger

HG 21541-1992 General diagram of welded H-beam standard joints (1) Welded connection (2) High-strength bolts

ES-UNE, be stronger

UNE-EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (Endorsed by AENOR in February of 2009.)
UNE-EN ISO 10350-2:2021 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020)

Institute of Electrical and Electronics Engineers (IEEE), be stronger

IEEE Std 802.3de-2022 IEEE Standard for Ethernet - Amendment 5: Enhancements to the MAC Merge and Time Synchronization Service Interface for Point-to-Point 10 Mb/s Single Pair Ethernet
IEEE St802.3de-2022 IEEE Standard for Ethernet - Amendment 5: Enhancements to the MAC Merge and Time Synchronization Service Interface for Point-to-Point 10 Mb/s Single Pair Ethernet
IEEE P802.3de/D3.1, May 2022 IEEE Draft Standard for Ethernet - Amendment 5: Enhancements to the MAC Merge and Time Synchronization Service Interface for Point-to-Point 10 Mb/s Single Pair Ethernet

Defense Logistics Agency, be stronger

DLA DSCC-DWG-87055 REV F-2008 CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, ONE-POLE, AUXILIARY CONTACTS
DLA DSCC-DWG-87059 REV E-2008 CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, SHOCK ENHANCED, THREE-POLE, AUXILIARY CONTACTS

European Committee for Electrotechnical Standardization（CENELEC）, be stronger

EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

International Electrotechnical Commission (IEC), be stronger

IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

Aerospace, Security and Defence Industries Association of Europe (ASD), be stronger

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

Professional Standard - Non-ferrous Metal, be stronger

YS/T 63.14-2006 Carbonaceous materials used in the production of aluminium-Part 14:Determination of bending/shear strength by a three-point method
YS/T 63.14-2023 Carbonaceous materials used for the production of aluminium — Part 14:Determination of bending/shears strength — Three point method

ESDU - Engineering Sciences Data Unit, be stronger

ESDU 85020 F-1993 CHARACTERISTICS OF ATMOSPHERIC TURBULENCE NEAR THE GROUND. Part II: single point data for strong winds (neutral atmosphere)

BE-NBN, be stronger

NBN E 44-001-1976

Professional Standard - Geology, be stronger

DZ/T 0276.23-2015 Regulation for testing the physical and mechanical properties of rock.Part 23:Test for determining the point load strength of rock

ZA-SANS, be stronger

SANS 9614-1:1993 Acoustics - Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points

AASHTO - American Association of State Highway and Transportation Officials, be stronger

T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
T 177-2003 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)

The American Road & Transportation Builders Association, be stronger

AASHTO T 177-2010 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)

未注明发布机构, be stronger

DIN EN ISO 10350-2:2001 Plastics – Determination and presentation of comparable single-point characteristics – Part 2: Long fiber-reinforced plastics