ZH
RU
ES

six-well plate diameter

six-well plate diameter, Total:426 items.

In the international standard classification, six-well plate diameter involves: Screw threads, Fasteners, Cutting tools, Valves, Pipeline components and pipelines, Burners. Boilers, Ceramics, Special measuring equipment for use in telecommunications, Structure and structure elements, Mining equipment, Machine tool systems, Fluid power systems, Ground service and maintenance equipment, Woodworking equipment, Dentistry, Fasteners for aerospace construction, Installations in buildings, Galvanic cells and batteries, Paper and board, Materials for the reinforcement of composites, Particle size analysis. Sieving, Equipment for the chemical industry, Aircraft and space vehicles in general, Linear and angular measurements, Aerospace fluid systems and components, Earthworks. Excavations. Foundation construction. Underground works, Electromechanical components for electronic and telecommunications equipment, Powder metallurgy, Telecommunication terminal equipment, Machine tools, Equipment for processing of minerals, Iron and steel products, Measurement of fluid flow, Postal services, Chipless working equipment, Bottles. Pots. Jars, Bearings, Agricultural machines, implements and equipment, Electrical wires and cables, Lifting equipment, Cans. Tins. Tubes, Medical equipment, Electronic component assemblies.

German Institute for Standardization, six-well plate diameter

DIN 7952-2:1971-10 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 7952-2:1971 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 974-2:1991-05 Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions / Note: DIN 74-3 (1991-05) remains valid alongside this standard until 1996-04-30.
DIN 974-2:1991 Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
DIN 28182:2007 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 28182:1987 Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 974-1:2008-02 Diameters of counterbores - Manufacturing dimensions - Part 1: Hexagon socket head cap screws and screws with cheese head or pan head
DIN 20311:2002 Drill tubes with diameters exceeding 100 mm for large hole boring in mining
DIN 2245-1:1989 GO and NOT GO plug gauges from 1 mm to 40 mm nominal diameter
DIN 20311:2002-11 Drill tubes with diameters exceeding 100 mm for large hole boring in mining
DIN EN ISO 4015:2022-10 Fasteners - Hexagon head bolts with reduced shank (shank diameter <ca> pitch diameter) - Product grade B (ISO 4015:2022); German version EN ISO 4015:2022
DIN 28182:2007-09 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 2245-2:1989 GO and NOT GO plug gauges over 40 mm up to 65 mm nominal diameter
DIN 974-1:2008 Diameters of counterbores - Manufacturing dimensions - Part 1: Hexagon socket head cap screws and screws with cheese head or pan head
DIN 974-1:1991 Diameters of counterbores for hexagon socket head cap screws and screws with cheese head or pan head; manufacturing dimensions
DIN ISO 4783-2:1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 2: Preferred combinations for woven wire cloth; identical with ISO 4783-2:1989
DIN EN 24015:1991 Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991
DIN 7975:2016-04 Tapping screw connections - Guideline values for core hole diameters and use
DIN 7975:2016 Tapping screw connections - Guideline values for core hole diameters and use
DIN 7975:1989 Tapping screw connections; guideline values for core hole diameters and use
DIN 75501:1987-10 Instrument panel-measuring instruments for motor vehicles; built-in diameters
DIN 7500-2:1984 Thread rolling screws for ISO metric thread; guideline values for hole diameters
DIN 20314:1990 Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining
DIN ISO 4783-1:1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 1: Generalities; identical with ISO 4783-1:1989
DIN 2247-3:1989 NOT GO plug gauges with cylindrical gauging member over 40 mm up to 120 mm nominal diameter
DIN 75501:1987 Instrument panel-measuring instruments for motor vehicles; built-in diameters
DIN 20314:1990-06 Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining
DIN 7500-2:2016 Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
DIN 739:2011 Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with cylindrical bore
DIN EN 13724:2013-07 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods; German version EN 13724:2013
DIN EN 13724 Berichtigung 1:2016-08 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods; German version EN 13724:2013, Corrigendum to DIN EN 13724:2013-07; German version EN 13724:2013/AC:2016
DIN 738:2011 Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with cylindrical bore
DIN 28125-1:1989 DN 150 to DN 600 round hinged closures
DIN 8376:2006 Subland twist drills with parallel shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws
DIN 739:2011-06 Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with cylindrical bore
DIN 738:2011-06 Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with cylindrical bore
DIN 2246-2:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 2: For holes over 120 mm up to 200 mm nominal diameter
DIN 738:1984 Rolling bearings; plummer block housings for rolling bearings of diameter series 2 with cylindrical bore
DIN 739:1984 Rolling bearings; plummer block housings for rolling bearings of diameter series 3 with cylindrical bore
DIN 2246-1:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2245-1:2008 Geometrical product specifications (GPS) - Limit plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2245-2:2008 Geometrical product specifications (GPS) - Limit plug gauges - Part 2: For holes over 40 mm up to 65 mm nominal diameter
DIN 2248-2:2008 Geometrical product specifications (GPS) - "GO" gauging members - Part 2: For holes over 40 mm up to 120 mm nominal diameter
DIN 737:2011 Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve
DIN 2246-1:2008-07 Geometrical product specifications (GPS) - "GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2246-3:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 3: For holes over 40 mm up to 120 mm nominal diameter
DIN 2248-3:2008 Geometrical product specifications (GPS) - "GO" gauging members - Part 3: For holes over 120 mm up to 200 mm nominal diameter
DIN 2248-1:2000-01 Verification of geometrical parameters - "GO" gauging members - Part 1: For holes from 1 mm to 40 mmm nominal diameter
DIN 2245-1:2008-07 Geometrical product specifications (GPS) - Limit plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2247-1:2008 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2249-1:2000-01 Verification of geometrical parameters - "NOT GO" gauging members - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 736:2011 Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with tapered bore and adapter sleeve
DIN 736:1984 Rolling bearings; plummer block housings for rolling bearings of diameter series 2 with tapered bore and adapter sleeve
DIN 737:1984 Rolling bearings; plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve
DIN 2248-1:2000 Verification of geometrical parameters - "GO" gauging members - Part 1: For holes from 1 mm to 40 mmm nominal diameter
DIN 737:2011-06 Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve
DIN 2247-1:2008-07 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter

SE-SIS, six-well plate diameter

SIS SMS 1724-1965
SIS SMS 1523-1950
SIS SMS 982-1970 Wood-working machines. Spindle diameters for machines ivith bored tools
SIS SS-ISO 1307:1990 Rubber and plastics hoses — Bore diameters and tolerances on length
SIS SS 2173-1988 Diameters of spot facings, counterbores and countersinks - MScrews and nuts with ISO metric screw threads and tapping screws
SIS 71 11 03
SIS SS-ISO 3320:1990 Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series

Korean Agency for Technology and Standards (KATS), six-well plate diameter

KS B ISO 273:2010 Diameter of clearance holes and counterbores for bolts and screws
KS B 2305-2006 Nominal size and bore of valves
KS B ISO 273-2010(2020) Diameter of clearance holes and counterbores for bolts and screws
KS B ISO 4015-2007(2022) Hexagon head bolts－Product grade B－Reduced shank(shank diameter approximately equal to pitch diameter)
KS B ISO 4015:2007 Hexagon head bolts-Product grade B-Reduced shank(shank diameter approximately equal to pitch diameter)
KS B ISO 4015-2007(2017) Hexagon head bolts－Product grade B－Reduced shank(shank diameter approximately equal to pitch diameter)
KS M ISO 1307:2008 Rubber and plastics hoses－Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
KS B ISO 3320-2006(2011) Fluid power systems and components－Cylinder bores and piston rod diameters－Metric series
KS F 7003-2016(2021) Standard test method for bi-directional pile load test of large-diameter drilled shafts

RU-GOST R, six-well plate diameter

GOST 21586-1976 Countersinks for machining holes diameters from 3 to 80 mm. Hole tolerance
GOST 19257-1973 Holes for threading metric thread. Diameters
GOST 21350-1975 Holes for threading pipe taper screw thread. Diameters
GOST 21348-1975 Holes for threading pipe cylindrical thread. Diameters
GOST 12813-1967 Aircraft and helicopter tank filling orifices. Diameters
GOST 24820-1981 Broaches combined for 8-slitting holes with straight tside proile and centring at outside diameter, alternatives. Design and dimensions
GOST 25969-1983 Combined alternative broaches for 6 slitting holes with straightside profile and centring at inside diameter. Design and dimensions
GOST R 50791-1995 Hexagon head bolts with reduced shank, product grade B (shank diameter approximately equal to pitch diameter). Specifications
GOST 28701-1990 Wood-cutting tool. Cutters. Diameters of tool mounting bore
GOST 25970-1983 Combined alternative double driven broaches for 6 slitting holes with straightside profile and centring at internal diameter. Design and dimensions
GOST 24819-1981 Broaches combined for 6-slitting holes with straightside profile and centring at outside diameter, alternatives. Double driven. Design and dimensions
GOST 10602-1994 Hexagon head bolts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10605-1994 Hexagon nuts with thread diameter over 48 mm. Product grade B. Spesifications
GOST 10602-1972 Hexagon-head bolts with thread diameter over 48 mm (standard precisin). Design and dimensions
GOST 10605-1972 Hexagon nuts with thread diameter over 48 mm (standard precision). Design and dimensions
GOST 24115-1980 Keyway depth gauges for holes with diameter from 3 to 10 mm. Design and dimensions
GOST 24116-1980 Keyway depth gauges for holes with diameter over 10 to 90 mm. Design and dimensions
GOST 24117-1980 Keyway depth gauges for holes with diameter over 90 to 200 mm. Design and dimensions
GOST 24961-1981 Plate double-end plug gauges with diameter from 14 to 98 mm. Design and dimensions
GOST 10607-1994 Hexagon thin nuts (chamfered) with thread diameter over 48 mm. Product grade B. Specifications
GOST 10607-1972 Hexagon lock nuts with thread diameter over 48 mm (standard precision). Design and dimensions
GOST 18365-1993 Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions
GOST 24818-1981 Broaches combined for b-slitting holes with straightside profile and centring at outside deameter, alternatives. Design and dimensions
GOST 10606-1972 Hexagon castle nuts with thread diameter over 48 mm (Product grade B). Design and dimensions
GOST R 50285-1992 Plate snap-gauges for diameters from 1 to 6 mm. Dimensions
GOST R 50286-1992 Plate snap-gauges for diameters from 3 to 260 mm. Dimensions
GOST 9523-1984 Shanks for tool. Diameters, squares and holes for driving squares. Dimensions
GOST 24733-1981 Single pole sockets and plugs with contact diameter 1,6 and 4,0 mm. Specifications
GOST 28044-1989 Internal broaches for straight splines based at internal diameter one pass combined type. Construction
GOST 10608-1972 Hexagon nuts with reduced width across flat with thread diameter over 48 mm (Product grade A). Design and dimensions
GOST 17573-1972 Multiball hard differential rollers by diameters from 40 to 300 mm for dimension-finishing of openings of machine components by pressere. Design and dimensions
GOST R 50035-1992 Combined broaches with diameter from 50 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction
GOST R 50037-1992 Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 3 to 4 mm. Construction
GOST R 50038-1992 Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside dimeter with modul from 3 to 5. Construction
GOST 28048-1989 Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul frome 1,5 to 2,5 mm. Construction
GOST 28050-1989 Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul from 3 to 5 mm. Construction
GOST 18125-1972 Hexagon reduced head bolts with thread diameter over 48 mm (product grades A and B). Design and dimensions
GOST 24822-1981 Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter, alternatives. Design and dimension
GOST R 50036-1992 Combined broaches with diameter from 90 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 2,5 mm. Construction
GOST 10609-1972 Hexagon castle nuts with reduced width across flat with thread diameter over 48 mm (Product grade A). Design and dimensions
GOST 10610-1972 Hexagon lock nuts with reduced width across flat with thread diameter over 48 mm (Product grade A). Design and dimensions
GOST 14826-1969 Sheet plain single-end plug gauges with diameter over 50 to 250 mm. Design and dimensions
GOST 24821-1981 Broaches combined for 8-slitting holes with straightside profile and centring at outside diameter, alternatives. Double driven. Design and dimensions
GOST 24823-1981 Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter, alternatives. Donble driven. Design and dimensions
GOST 25971-1983 Combined alternative broaches for 8 slitting holes with straightside profile and centring at internal diameter. Design and dimensions
GOST 25973-1983 Combined alternatives broaches for 10 slitting holes with straightside profile and centring at internal diameter. Design and dimensions
GOST 28045-1989 Internal broaches for straight splines based at internal diameter dauble pass combined type. Construction
GOST 28049-1989 Broaches with diameter from 90 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul from 2,5 mm. Construction
GOST 28051-1989 Broaches with diameter from 70 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul from 3 to 5 mm. Construction
GOST 19964-1974 Support plate for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions
GOST 19965-1974 Support plate for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions
GOST 19967-1974 Movable retainer rings for wax-pattern dies with max 190 mm dia cylinder matrices. Design and dimensions
GOST 19968-1974 Movable retainer rings for wax-pattern dies with min 190 mm dia cylinder matrices. Design and dimensions
GOST 14824-1969 Go plain plug gauges of not full-form with laps of diameter over 160 to 300 mm. Design and dimensions

Taiwan Provincial Standard of the People's Republic of China, six-well plate diameter

CNS 4949-1979 Tapping Screws, Applications and Core Holes
CNS 211-1953 Diameters of Drill Heads (for Drilling Bolt Holes)
CNS 4245-1978 Clearance Holes for Metric Bolts (1.6 up to and Including 150 mm Thread Diameter)

Professional Standard - Machinery, six-well plate diameter

JB/ZQ 4719-2006 Diameter of twist drill for drilling hole before inside whorl treatment or car (bore) hole diameter
JB/T 9987-1999 Diameter of the twist drill used before tapping
JB/T 8997.2-1999 Machine spools with large bore for processing of electric wires and cables.Part 2:Steel plate welded machine spools
JB/T 8997.2-2013 Machine spools with large bore for processing of wires and cables.Part 2: Machine spools with welded steel plate

CZ-CSN, six-well plate diameter

CSN 10 7015-1980 Vacuum technology. Bore diameters.
CSN 20 1505-1983 Metal-working machines. Tool hole diameters for cutting tools with cylindrical shank
CSN 63 1131-1976 Tyres for scooters 8, 10, 12 aud J4 rim diameter.
CSN 02 4650-1965 Tilting double-row ball bearings with bore diamoter d < 10
CSN 69 6116-1975 Chemical equipment. Tubular heat ex- changers. Arrangement of tube holes in tube-plates and partitions of apparatuseg with diameters up to 600 mm
CSN 02 6204-1976 Shaft couplings for general use. Torque, bore diameters and hub lengths
CSN 22 1340-1955
CSN 69 0631-1967 Fiat welding flanges of prossore veasels ith internal guiding diameter
CSN 69 0636-1967 Fiat welding flanges with recess for pressure vessels with internal guiding diameter

North Atlantic Treaty Organization Standards Agency, six-well plate diameter

STANAG 3212-1998 DIAMETERS FOR GRAVITY FILLING ORIFICES

TIA - Telecommunications Industry Association, six-well plate diameter

EIA/TIA-455-167A-1992 FOTP-167 Mode Field Diameter@ Variable Aperture in the Far Field

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, six-well plate diameter

GB/T 1967-1996 Test method for pore diameter of porous ceramic
GB/T 20330-2006 Drill diameter for use prior to tapping screw threads
GB/T 2679.14-1996 Filter paper and filterboard--Determination of maximum pore diameter
GB/T 18678-2002 Equipment for crop protection--Agriculture spray--Nominal capacity of spray tank and diameter of filling

IPC - Association Connecting Electronics Industries, six-well plate diameter

IPC TR-579 CD-1988 Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

American National Standards Institute （ANSI), six-well plate diameter

ANSI/EIA/TIA 455-167A:1992 Mode Field Diameter Measurement - Variable Aperture Method in the Farfield
ANSI B93.3-1984 Cylinder Bore and Piston Rod Diameters - Inch Series
ANSI/TAPPI T1016 om-2010 Average fiber diameter of fiber glass mats

Danish Standards Foundation, six-well plate diameter

DS 2389:1993 Centre holes 60 degree. Determination of dimensions
DS 2390:1993 Centre holes 90 degree. Determination fo dimensions
DS/EN 24015:1992 Hexagon head bolt. Product grade B. Reduced shank (Shank diameter approximately equals pitch diameter)
DS/ISO 4015:1981 Hexagon head bolts. Product grade B. Reduced shank (Shank diameter = pitch diameter)
DS/EN 13724:2013 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods

Institute of Interconnecting and Packaging Electronic Circuits (IPC), six-well plate diameter

IPC TR-579-1988 Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

TR-TSE, six-well plate diameter

TS 511-1967 Light Metal Rivets for Shipbuilding Nominal Diameters, Rivet Hole Diameters and Clearances
TS 561-1967 ISO METRIC SERIES FOR BASIC THICKNESSES OF SHEET AND DIAMETERS OF WIRE

Professional Standard - Aerospace, six-well plate diameter

QJ 1133.14-1987 Mechanical clamping turning tool pressure plate type 75° inner hole turning tool (tool diameter 25)
QJ 1133.15-1987 Mechanical clamping turning tool pressing plate type 90° inner hole turning tool (shank diameter 16)
QJ 1133.16-1987 Mechanical clamping turning tool pressure plate type 90° inner hole turning tool (tool diameter 25)
QJ 1133.13-1987 Mechanical clamping turning tool pressure plate type 75° inner hole turning tool (tool diameter 16)
QJ 2920-1997 Bottom hole diameter before MJ internal thread tapping
QJ 151-1974 Type and size of thread rolling wheel (inner hole diameter φ54mm)
QJ 400-1978 Countersinking of countersunk screw holes (screw diameter = M3~M10, ψ = 90°)
QJ 399-1978 Countersink rivet hole countersinking (rivet diameter = 2.5~6, ψ = 90°, 120°)
QJ 395-1978 Countersinking rivet holes countersinking (rivet diameter = 3~6, ψ = 90°, 120°)
QJ 1133.18-1987 Mechanical clamping turning tool pressure plate type inner groove turning tool (tool diameter 25)
QJ 1133.17-1987 Mechanical clamping turning tool pressure plate type inner groove turning tool (tool diameter 16)

HU-MSZT, six-well plate diameter

AENOR, six-well plate diameter

UNE 25161:1963 SELECTIVE LIST OF THE HOLE DIAMETERS FOR STEEL RIVET SETTING (2-20 MM DIAMETERS).
UNE-EN 24015:1992 HEXAGON HEAD BOLTS. PRODUCT GRADE B. REDUCED SHANK (SHANK DIAMETER APROX. PITCH DIAMETER). (ISO 4015:1979)
UNE 25163:1963 SELECTIVE LIST OF THE DIAMETERS OF SCREWS CLEARANCE HOLES (4-24 MM).
UNE 101360:1986 FLUID POWER SYSTEMS AND COMPONENTS. CYLINDER BORES AND PISTON DIAMETERS
UNE 68103:1997 EQUIPMENT FOR CROP PROTECTION. AGRICULTURAL SPRAYERS. TANK NOMINAL VOLUME AND FILLING HOLE DIAMETER.
UNE-EN 13724:2013 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods
UNE 103807-1:2005 Plate loading test of soils by means of dynamic plate. Part 1: Rigid plate, diameter 2r=600 mm, Method 1
UNE 103807-2:2008 Plate loading test of soils by means of dynamic plate. Part 2: Rigid plate, diameter 2r=300 mm, Method 2

NL-NEN, six-well plate diameter

NEN 2835-1971 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm
NEN 2810-1987 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm

NATO - North Atlantic Treaty Organization, six-well plate diameter

STANAG 3212-1988 Diameters for Gravity Filling Orifices (ED 5 AMD 2)

Association Francaise de Normalisation, six-well plate diameter

NF G32-302:1981 Habillement - Accessoires pour vêtements - Boutons à 2 ou 4 trous - Diamètres et entraxes des trous
NF EN ISO 4015:2022 Fixations - Vis à tête hexagonale partiellement filetées à tige réduite (diamètre de tige diamètre sur flanc de filet) - Grade B
NF G32-303:1981 Habillement - Accessoires pour vêtements - Boutons à queue - Diamètre et position du trou .
NF L22-444:1993 HEXAGONAL NUTS. REDUCED HEIGHT. REDUCED ACROSS FLATS WITH LOCKING HOLES. ISO LH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-442:1993 HEXAGONAL NUTS. REDUCED HEIGHT. REDUCED ACROSS FLATS. ISO LH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-443:1993 HEXAGONAL NUTS. REDUCED HEIGHT. REDUCED ACROSS FLASTS WITH LOCKING HOLES. ISO RH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-437:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO RH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF A95-353*NF EN 24003:1993 Permeable sintered metal materials. Determination of bubble test pore size.
NF EN 17368:2020 Revêtements de sol stratifiés - Détermination de la résistance aux chocs à l'aide d'une bille de petit diamètre
NF L22-438:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO LH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF H35-100:2000 Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules.
NF X11-510:1988 Sieves and sieving. Wire gauze with square apertures made from annealed round wire for industrial use. Wire diameters.
NF ISO 9357:1990 Matériel de traitement agropharmaceutique - Pulvérisateurs agricoles - Volume nominal du réservoir et diamètre du trou de remplissage.
NF L22-443:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-444:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-437:2000 Aircraft bolts and nuts - Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-453:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter
NF E52-502:1956 CABLE APPLIANCES. METAL CABLE REELS WITH CHEEK DIAMETERS NOT LESS THAN 750 MM. DIMENSIONS.
NF U26-133*NF ISO 9357:1990 Equipement for crop protection. Agricultural sprayers. Tank nominal volume and filling hole diameter.
NF Q09-001:1975 Paper and board. Ordinary filling systems. Dimensional specifications for file fasteners and holes in sheets.
NF L22-441:1993 HEXAGONAL NUTS. REDUCED HEIGHT. REDUCED ACROSS FLATS. ISO RH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-438:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF ISO 3320:2014 Transmissions et composants hydrauliques et pneumatiques - Alésages des vérins et diamètres des tiges de piston et rapports de surfaces - Série métrique
NF L22-453:1987 HEXAGONAL CASTELLETED NUTS. REDUCED HEIGHT. ISO THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.

ES-UNE, six-well plate diameter

UNE-EN ISO 4015:2023 Fasteners - Hexagon head bolts with reduced shank (shank diameter ˜ pitch diameter) - Product grade B (ISO 4015:2022)
UNE 57175:2019 Board. Determination of the resistance to perforation. Constant speed linear method
SAE AS3626B-2023 NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286, COUNTERBORED SILVER PLATED THREADS ONLY
UNE-EN 13724:2013/AC:2016 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods
UNE 103807-2:2021 Plate loading test of soils by means of dynamic plate. Part 2: Rigid plate, diameter 2r=300 mm, Method 2

IT-UNI, six-well plate diameter

Professional Standard - Aviation, six-well plate diameter

HB/Z 259-1994 Bottom hole diameter and deviation of interference thread process
HB 4513-1991 Rectangular plate (for scribing and drilling table )
HB 3874-1986 Bottom hole diameter and deviation of internal thread cutting process

British Standards Institution (BSI), six-well plate diameter

BS EN ISO 4015:2022 Fasteners. Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter). Product grade B
20/30351927 DC BS EN ISO 4015. Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter). Product grade B
BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
BS 4185-14:1987 Machine tool components - Method for determination of the pilot diameter of 60 ° centre holes
19/30390587 DC BS ISO 13319-1. Determination of particle size distribution. Electrical sensing zone method. Part 1. Aperture/orifice tube method
BS ISO 15142-3:2003 Implants for surgery - Metal intramedullary nailing systems - Connection devices and reamer diameter measurements
PD IEC TR 61760-3-1:2022 Surface mounting technology - Standard method for the specification of components for through hole reflow (THR) soldering. Guidelines for through hole diameter design with solder paste surface printing method

CU-NC, six-well plate diameter

NC 06-02-1967 Heavy bolts with hexagonal head Diameter: 1/4 to 1/2 inches
NC 06-04-1967 Heavy bolts with hexagonal head Diameter: 9/16 to 11/2 inches
NC 06-06-1967 Precision screws with hexagonal head Diameter 1/4 to 3/4 inches
NC 06-10-1967 Heavy hexagonal screwnuts from No. 4 to No. 10.
NC 06-07-1967 Precision screws whole threaded with hexagonal head. Diameter: 1/4 to 3/4 inches
NC 06-05-1967 Heavy bolts whole threaded with hexagonal head. Diameter: 9/16 to 1 1/2 inches
NC 06-03-1967 Heavy bolts whole threaded with hexagonal head. Diameter: 1/4 to 1/2 inches
NC 06-13-1967 Heavy hexagonal screwnuts from 1/4 to 3/4 inches diameters
NC 06-11-1967 Heavy hexagonal screwnuts from 1/4 to 11/2 inches diameter
NC 06-06-1985 Fixing Machine Elementa. Pre- cision Hexagonal-Head Screws from 1/4 to 3/4 in. Parameters and Main Dimensions

CH-SNV, six-well plate diameter

SN EN 54 Teil 9-1984 Components of automatic fire detection SystemsPart 9: Fire sensitivity festOrganes constitutifs des systemes de detection automatique d'incendiePartie 9: Essais de sensibilite sur foyers types
VSM 10367-1977

RO-ASRO, six-well plate diameter

STAS SR ISO 4015:1979 Hexagon head boIts-Product grade B-Reduced shank (shank diameter ≈ pitch diameter)
STAS SR ISO 10323:1995 Dental rotary instruments - Bore diameters for discs and wheels
STAS R 584/1-1969
STAS 2561/4-1990 Foundation ground LARGE DIAMETER DRILLED PILES Design, construction and acceptance general specifications
STAS 3633-1971 Non-adjustable plain hole gauges. PLUG-GAUGE, WITH THE DIAME- TER FROM 100 to 200 mm Dimensions
STAS 8195-1984 RUBBER HOSKS Bore diameters and tolerances on length, proof and burst pressures
STAS 2374-1979 Geological Investigation equipment DRILLING HEADS AND COLLARS FOR DRILLING MACHINES Types and diameters
STAS 2981/1-1988 Non adjusable plain hole gauges PLUG GAUGES WITH NOMINAL DIAMETER FROM 1 UP TO 50 mm Dimensions
STAS SR ISO 1307:1995 Rubber and plastic hoses for general-purpose industrial applications -Bore diameters and tolerances and tolerances on lenght
STAS 2981/2-1988 Non adjustable plain hole gauges PLUG GAUGES W1TH XOMINAL DFAMETER FROM 40 l'l' TO 120 mm Dimensions

American Society of Mechanical Engineers (ASME), six-well plate diameter

ASME MFC-14M-1995 Measurement of fluid flow using small bore precision orifice meters
ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ASME MFC-14M-2003(R2018) Measurement of Fluid Flow Using Small Bore Precision Orifice Meters

GM North America, six-well plate diameter

GM GMT-81.103-1968 Tubeless Tire Valve Assemblies Straight Snap-in Type for .625 DIA Rim Holes
GM GMT-81.101-1968 Tubeless Tire Valve Assemblies Straight Snap-in Type for .453 DIA Rim Holes Recommended Valve Assembly for Passenger Cars

Society of Automotive Engineers (SAE), six-well plate diameter

SAE AS52600-1-1990 AS52600-699 Nut - Reduced Hexagon - Self Locking - Deep Counterbored - Metric Series
SAE AS9528-2000 Screw, Machine Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .164-36 UNJF-3A
SAE AS9530-1998 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .250-28 UNFJ-3A
SAE AS9528C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A
SAE AS152901-2005 STUD, STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28
SAE AS152601-2005 STUD, STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, .250-20 X .190-32
SAE AS153201-2007 STUD, STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, .375-16 x .3125-24
SAE AS152901 THRU AS153200-1999 Stud, Stepped, Drilled 1.5 Dia Engagement, .3125-18 X .250-28
SAE AS9531-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .3125-24 UNJF-3A
SAE AS9529-2004 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .190-32 UNJF-3A
SAE AS9530-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .250-28 UNJF-3A
SAE AS9533-2006 BOLT, MACHINE - STEEL, AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .4375-20 UNJF-3A
SAE AS9534-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .500-20 UNJF-3A
SAE AS9532-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .375-24 UNJF-3A
SAE AS9527-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .138-40 UNJF-3A
SAE AS9528-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A
SAE AS9527C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A
SAE AS9529C-2022 BOLT, MACHINE - STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
SAE AS162501-2005 STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, .4375 X .375-24
SAE AGS2108-2-1960 AGS2108 Protective Plugs for Plain Bores. 5/8" to 2 1/2 " DIA
SAE AS4134A-2004 TEE, BULKHEAD ON RUN, REDUCED BODY, FLARELESS FSC 4730
SAE AS162501 THRU AS162800-1999 Stud, Stepped, Drilled Necked, 2 Dia Engagement, .4375 X .375-24
SAE AS9529A-2007 BOLT, MACHINE - STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1900-32 UNJF-3A
SAE MA3393-1990 Clip - Spring, Tension, Outer 6.7 MM Bolt Hole, AMS 5525, Metric FSC 5340
SAE AS3616-2018 NUT, SELF-LOCKING, DOUBLE HEXAGON REDUCED FLANGE, SOLID FILM LUBE COUNTERBORED 180 KSI, 1400 °F, UNS N07001
SAE MA3304A-2006 BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE AS4689B-2003 (R) FITTING, TEE, REDUCER, BULKHEAD ON RUN, FLARELESS AND SHORT FLARELESS
SAE AS9686C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9687A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9685A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9685D-2023 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9686A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9685C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9687C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS3616-2007 NUT, SELF-LOCKING, DOUBLE HEXAGON REDUCED FLANGE, SOLID FILM LUBE COUNTERBORED 180 KSI, 1400 °F, UNS N07001
SAE AS152901-2006 Stud, Stepped, Drilled 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
SAE AS153201B-2014 STUD, STEPPED, DRILLD 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A
SAE AS152601A-2006 STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A
SAE AS152901C-2021 STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
SAE AS153201A-2010 STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A
SAE AS152901B-2016 STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
SAE AS3626A-2012 Nut, Self-Locking, Double Hexagon, Reduced Envelope, UNS S66286, Counterbored Silver Plated Threads Only
SAE AS162501B-2016 STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G887400, .4375-14 UNS X .3750-24 UNF-3A
SAE AS162501C-2022 STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G887400, .4375-14 UNS X .3750-24 UNF-3A
SAE AS6098-2011 Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal on Side, Flared, 37° Spherical
SAE TS135-2-2004 TS135 Technical Specification for All Metal Self-Locking Nuts (MJ Threads Reduced Hexagon - Deep Counterbored Tensile Strength:- 1100 MPa at Ambient Temperature

Professional Standard - Electron, six-well plate diameter

SJ/T 10171.10-1991 Determination of maximum Pore diameter in separator.Bubble test method
SJ 1819-1981 Preferred series--Module, number of teeth,face width and diameter of datum apperture for fine-pitch gears

PL-PKN, six-well plate diameter

PN M57025-1974 Holes in steel and cas? iron Diamefers of drills and reamers
PN H75210-1957 Cast-iron drain traps for sinks without socket with 50 mm diameters
PN M55657-1960 Metal Cuttinq Machin? Tools. Tes? Con- di?ions for Turret Lafhes with Diame?er of Tum upon Bed to 630 mm

International Organization for Standardization (ISO), six-well plate diameter

ISO 4015:2022 Fasteners — Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) — Product grade B
ISO 13319-1:2021 Determination of particle size distribution - Electrical sensing zone method - Part 1: Aperture/orifice tube method
ISO 2194:1972 Wire screens and plate screens for industrial purposes — Nominal sizes of apertures
ISO/R 388:1964 ISO metric series for basic thicknesses of sheet and diameters of wire
ISO 3320:1975 Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
ISO 4783-1:1981 Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 1: Generalities
ISO 6155-2:1986 Acceptance conditions for horizontal spindle capstan, turret and single spindle automatic lathes; Testing of the accuracy; Part 2 : Machinable bar diameters 25 mm or less and chuck diameter up to 160 mm
ISO 2735:1973 Hermetically sealed metal food containers — Capacities and diameters of round open-top and vent hole cans for milk

Defense Logistics Agency, six-well plate diameter

DLA A-A-59385 VALID NOTICE 1-2005 GRINDING MACHINE, CENTER HOLE, VERTICAL, FLOOR-MOUNTED
DLA A-A-59385-1999 GRINDING MACHINE, CENTER HOLE, VERTICAL, FLOOR-MOUNTED
DLA AN160401 THRU AN160700 REV 2 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20
DLA AN160401 THRU AN160700 REV 2-1972 STUD-STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20
DLA AN163101 THRU AN163400 REV 3 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, .5625-12 X .500-20
DLA AN163101 THRU AN163400 REV 3-1986 STUD-STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, .5625-12 X .500-20
DLA AN160701 THRU AN161000 REV 3 VALID NOTICE 1-20 STUD STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT, .5625-12 X .500-20
DLA AN160701 THRU AN161000 REV 3-1987 STUD STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT, .5625-12 X .500-20
DLA AN170301 THRU AN170600 REV 2 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 2 DIA ENGAGEMENT, .5625-12 X .5000-20
DLA AN170301 THRU AN170600 REV 2-1972 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 2 DIA ENGAGEMENT, .5625-12 X .5000-20
DLA AN165501 THRU AN165800 REV 3 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28
DLA AN165501 THRU AN165800 REV 3-1987 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28
DLA AN166101 THRU AN166400 REV 3 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .4375-14 X .375-24
DLA AN166101 THRU AN166400 REV 3-1987 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .4375-14 X .375-24
DLA AN166401 THRU AN166700 REV 3 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20
DLA AN166401 THRU AN166700 REV 3-1987 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20
DLA A-A-59581 B-2003 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, BORE DIAMETERS UNDER 10 MM
DLA AN154401 THRU AN154700 REV 4 VN 1-1994 STUD STEPPED, DRILLED, 1.5 DIA. ENGAGEMENT, .625-11 X .5625-18 (INACTIVE 10-26-72)
DLA AN154401 THRU AN154700 REV 4-1987 STUD STEPPED, DRILLED, 1.5 DIA. ENGAGEMENT, .625-11 X .5625-18 (INACTIVE 10-26-72)
DLA A-A-59386 VALID NOTICE 1-2005 MILLING MACHINE, VERTICAL, RAM AND TURRET, KNEE, MANUAL
DLA A-A-59386-1999 MILLING MACHINE, VERTICAL, RAM AND TURRET, KNEE, MANUAL

BE-NBN, six-well plate diameter

SAE - SAE International, six-well plate diameter

SAE AS9527B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9527-2000 Screw@ Machine Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .138-40 UNJF-3A
SAE AS9528B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .164-36 UNJF-3A
SAE AS9527A-2007 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9532-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .375-24 UNJF-3A
SAE AS9534-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .500-20 UNJF-3A
SAE AS9533-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .4375-20 UNJF-3A
SAE AS9531-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .3125-24 UNJF-3A
SAE AS152601 THRU AS152900-1999 Stud@ Stepped@ Drilled@ 1.5 Dia Engagement@ .250-20 X .190-32
SAE AS153201 THRU AS153500-1998 Stud@ Stepped@ Drilled@ 1.5 Dia Engagement@ .375-16 x .3125-24
SAE AS152601 THRU AS152900A-2006 Stud Step Drill 1.5 Diameter Engage .250-20 X .190-32
SAE AS153201 THRU AS153500A-2010 Stud Stepped Drill 1.5 Diameter Engage .375-16 x .3125-24
SAE AS9529B-2016 BOLT@ MACHINE - STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1900-32 UNJF-3A
SAE AS162501 THRU AS162800B-2016 Stud, Stepped, Drilled Necked, 2 Dia Engagement, .4375 X .375-24
SAE AS162501 THRU AS162800A-2007 Stud, Stepped, Drilled Necked, 2 Dia Engagement, .4375 X .375-24
SAE AS9686-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .250-28 UNJF-3A
SAE AS9685-2000 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .190-32 UNJF-3A
SAE AS9687-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .3125-24 UNJF-3A
SAE MA3304-1987 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA3304A-1996 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE AS4689A-1994 Fitting@ Tee@ Reducer@ Bulkhead on Run@ Flareless and Short Flareless
SAE AS4689C-2012 (R) FITTING, TEE, REDUCER, BULKHEAD ON RUN, FLARELESS AND SHORT FLARELESS
SAE AS4689D-2017 FITTING@ TEE@ REDUCER@ BULKHEAD ON RUN@ FLARELESS AND SHORT FLARELESS
SAE AS9685A-2003 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS9685B-2016 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS152601 THRU AS152900B-2014 STUD@ STEPPED@ DRILLED 1.5 DIA ENGAGEMENT@ CADMIUM PLATED@ STEEL UNS G87400@ .2500-20 UNS X .1900-32 UNF-3A
SAE AS3626-2011 NUT@ SELF-LOCKING@ DOUBLE HEXAGON@ REDUCED ENVELOPE@ UNS S66286@C’BORE SILVER PLATED THREADS ONLY
SAE AS3626B-2018 Nut, Self-Locking, Double Hexagon, Reduced Envelope, UNS S66286, Counterbored Silver Plated Threads Only

Professional Standard - Chemical Industry, six-well plate diameter

HG/T 21519-2014 Plate flange manholes with davit to vertical cover
HG 21519-1995 Vertical hanging cover plate flat welding flange manhole
HG/T 21519-2005 Vertical hanging cover plate flat welding flange manhole
HG/T 21519-2005（编制说明） Vertical hanging cover plate flat welding flange manhole

PT-IPQ, six-well plate diameter

United States Navy, six-well plate diameter

NAVY MIL-T-23099 A (2)-1969 TAPPING KIT FOR SERVO-MOUNT POTENTIOMETERS TWO INCH DIAMETER
NAVY MIL-T-23099 A-1963 TAPPING KIT FOR SERVO-MOUNT POTENTIOMETERS TWO INCH DIAMETER
NAVY A-A-59817-2008 U-NUT, WIDE PANEL RANGE, 3/8-INCH DIAMETER, COARSE UNIFIED INCH SCREW THREADS

IN-BIS, six-well plate diameter

AT-ON, six-well plate diameter

ONORM B 4440-2001 Geotechnical engineering (foundation engineering) - Large diameter bored piles - Bearing capacity

YU-JUS, six-well plate diameter

JUS K.T3.131-1983 NOTGO gauging memberes for holes over 40 to 120 mm nominal diameter cylindrical plug gauges
JUS K.T3.123-1983 G0 plug gauges for hofos from 1 to anti inckiding 50 mm nominal aintnater
JUS K.T3.120-1983 60 gauging membres for holes from 1 up to and including 50 mm nominal diameter
JUS K.T3.124-1983 NO TGO plug gauges for holes from 1 to and including 50 mm nominal diameter
JUS K.T3.121-1983 NOTGOgauging members; for vvholes from 1 to and including 50 mm nominal diameter
JUS K.T3.152-1983 Fiat plug gauges NO TGO above 200 to and including 360 mm nominal diameter
JUS K.T3.122-1983 GO and NO TGO plug gauges for holes from f to and including 50 mm nominal diameter
JUS K.T3.112-1983 Tile gauges GO and NOTGO for measures over 2 up to and including 8 mm nominal si?e
JUS K.T3.111-1983 Tile gauges GO and NOT GO for measures up to including 12 mm nominal si?e
JUS K.T3.148-1983 Segmenta! cylindrical plate NOT GO gauges for holes above 120 to and including 200 mm nominal diameter
JUS K.T3.146-1983 Segmenta! cylindrical plate gauging members for holes above 120 to and 200 mm nominal diameter

ZA-SANS, six-well plate diameter

SANS 1700-7-2:1996 Fasteners Part 7: External drive hexagon bolts and screws Section 2: Hexagon head bolts - Product grade B - Reduced shank (shank diameter approximately equal to pitch diameter)

(U.S.) Ford Automotive Standards, six-well plate diameter

FORD ESH-M9H99-A2-1991 SCREEN, NYLON, MONOFILAMENT, 350 MICROMETRE MESH OPENING (Shown on ESH-M9H99-A1)
FORD ESH-M9H99-A3-1991 SCREEN, NYLON, MONOFILAMENT, 355 MICROMETRE MESH OPENING (Shown on ESH-M9H99-A1)
FORD ESH-M9H99-A4-1991 SCREEN, NYLON, MONOFILAMENT, 132 MICROMETRE MESH OPENING (Shown on ESH-M9H99-A1)

Standard Association of Australia （SAA）, six-well plate diameter

AS 2360.1.2:1993 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates or nozzles - Conduits with diameters less than 50 mm
AS 2360.1.1:1993 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates, nozzles or Venturi tubes - Conduits with diameters from 50 mm to 1200 mm

Japanese Industrial Standards Committee (JISC), six-well plate diameter

JIS R 1671:2006 Testing method for water permeability and hydraulic equivalent diameter of porous fine ceramics

National Aeronautics and Space Administration (NASA), six-well plate diameter

NASA-TN-D-5467-1969 Discharge coefficients for thick plate orifices with approach flow perpendicular and inclined to the orifice axis

European Committee for Standardization (CEN), six-well plate diameter

EN 13724:2013/AC:2016 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods
EN 13724:2013 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods

Lithuanian Standards Office , six-well plate diameter

LST EN 13724-2003 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods

Aerospace Industries Association/ANSI Aerospace Standards, six-well plate diameter

AIA/NAS NAS1834-2010 INSERT, MOLDED IN, CSK AND THRU CLEARANCE HOLE, SANDWICH PANEL (Rev 6)
AIA/NAS NASM51976-1998 Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNF-3A
AIA/NAS NASM51977-1998 Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNC-3A
AIA/NAS NASM51981-1998 Setscrew-Hexagon Socket, Oval Point, Alloy Steel, Cadmium Plated, UNC-3A
AIA/NAS NASM51982-1998 Setscrew-Hexagon Socket, Oval Point, Alloy Steel, Cadmium Plated, UNF-3A
AIA/NAS NAS 6404-2002 Bolt, Tension, Hex Head, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major Thread Diameter, Self-Locking and Nonlocking, 160 ksi Ftu Rev. 11; FSC 5305

Aerospace Industries Association, six-well plate diameter

AIA NAS 1834-1999 Insert, Molded in, Csk and Thru Clearance Hole, Sandwich Panel Revision 5; FSC5325

VN-TCVN, six-well plate diameter

TCVN 1562-1985 Caps for rolling bearing blocks.Low pierced caps with cup seal for diameters from 47 till 100 mm.Basic dimensions
TCVN 1563-1985 Caps for rolling bearing blocks.Low pierced caps with cup seal for diameters from 110 till 400 mm.Basic dimensions

ESDU - Engineering Sciences Data Unit, six-well plate diameter

ESDU 74004 A-1976 Normal incidence absorption coefficients and acoustic impedances of single layer perforated sheet liners.

U.S. Military Regulations and Norms, six-well plate diameter

ARMY MIL-PRF-52470 A VALID NOTICE 1-2004 AUGER, EARTH, TRUCK-MOUNTED, 91 CENTIMETER (36 INCH) DIAMETER HOLE, 18 METER (60 FOOT) MAX DEPTH (METRIC)
ARMY MIL-PRF-52470 A-1996 AUGER, EARTH, TRUCK-MOUNTED, 91 CENTIMETER (36 INCH) DIAMETER HOLE, 18 METER (60 FOOT) MAX DEPTH (METRIC)