ZH

RU

ES

Spectrometer use characteristics

Spectrometer use characteristics, Total:361 items.

In the international standard classification, Spectrometer use characteristics involves: Physics. Chemistry, Radiation measurements, Wastes, Metrology and measurement in general, Optoelectronics. Laser equipment, Lubricants, industrial oils and related products, Fuels, Optics and optical measurements, Analytical chemistry, Electricity. Magnetism. Electrical and magnetic measurements, Electronic components in general, Cereals, pulses and derived products, Rubber, Air quality, Optical equipment, Nuclear energy engineering, Fibre optic communications, Radiation protection, Vocabularies, Vacuum technology, Aerosol containers, Surface treatment and coating, Products of the textile industry, Edible oils and fats. Oilseeds, Water quality, Aids for disabled or handicapped persons, Railway engineering in general, Soil quality. Pedology, Materials for aerospace construction, Interface and interconnection equipment, Rubber and plastics products, Road engineering, Non-destructive testing, Measurement of volume, mass, density, viscosity, Linear and angular measurements, Magnetic materials, Raw materials for rubber and plastics, Applications of information technology, Non-ferrous metals, Testing of metals, Sugar. Sugar products. Starch, Medical equipment, Sterilization and disinfection, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Particle size analysis. Sieving, Radiocommunications, Mechanical testing, Paper and board, Solar energy engineering, Rectifiers. Convertors. Stabilized power supply.


International Organization for Standardization (ISO), Spectrometer use characteristics

  • ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
  • ISO 11382:2022 Optics and photonics — Optical materials and components — Characterization of optical materials used in the infrared spectral range from 0,78 μm to 25 μm
  • ISO/TS 10867:2019 Nanotechnologies — Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
  • ISO 5530-2:2020 Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties using an extensograph
  • ISO/TS 20175:2018 Vacuum technology - Vacuum gauges - Characterization of quadrupole mass spectrometers for partial pressure measurement
  • ISO 5530-1:2020 Wheat flour — Physical characteristics of doughs — Part 1: Determination of water absorption and rheological properties using a farinograph
  • ISO 5530-4:1991 Wheat flour; physical characteristics of doughs; part 4: determination of rheological properties using an alveograph
  • ISO 23216:2021 Carbon based films — Determination of optical properties of amorphous carbon films by spectroscopic ellipsometry
  • ISO/TS 11251:2010 Nanotechnologies - Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
  • ISO 13196:2013 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
  • ISO 7759:1983 Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
  • ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
  • ISO 23547:2022 Measurement of radioactivity — Gamma emitting radionuclides — Reference measurement standard specifications for the calibration of gamma-ray spectrometers
  • ISO/CD 13196:2023 Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
  • ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO 5530-4:1991/Cor 1:1992 Wheat flour; physical characteristics of doughs; part 4: determination of rheological properties using an alveograph; technical corrigendum 1
  • ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method
  • ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • ISO 18175:2004 Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments

SE-SIS, Spectrometer use characteristics

  • SIS SS IEC 714:1983 Electronic measurement equipment - Expression of the properties of spectrum analyzers

International Electrotechnical Commission (IEC), Spectrometer use characteristics

  • IEC 61976:2000 Nuclear instrumentation - Spectrometry - Characterization of the spectrum background in HPGe nuclear gamma-ray spectrometry
  • IEC 60476:1993 Nuclear instrumentation; electrical measuring systems and instruments utilizing ionizing radiation sources; general aspects
  • IEC 61275:1997 Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector
  • IEC 61275:2013 Radiation protection instrumentation.Measurement of discrete radionuclides in the environment.In situ photon spectrometry system using a germanium detector
  • IEC 61452:2021 Nuclear instrumentation - Measurement of activity or emission rate of gamma- ray emitting radionuclides - Calibration and use of germanium-based spectrometers
  • IEC 61290-10-1:2003 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters; Pulse method using an optical switch and optical spectrum analyzer
  • IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
  • IEC 61290-10-2:2007 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
  • IEC 62484:2010 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
  • IEC 62484:2020 Radiation protection instrumentation - Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material
  • IEC 61290-5-3:2002 Optical fibre amplifiers - Basic specifications - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance test method using electrical spectrum analyzer

British Standards Institution (BSI), Spectrometer use characteristics

  • BS EN 16424:2014 Characterization of waste. Screening methods for the element composition by portable X-ray fluorescence instruments
  • 18/30382086 DC BS EN 61452. Nuclear instrumentation. Measurement of gamma-ray emission rates of radionuclides. Calibration and use of germanium spectrometers
  • BS IEC 61452:2021 Nuclear instrumentation. Measurement of activity or emission rate of gamma-ray emitting radionuclides. Calibration and use of germanium-based spectrometers
  • 20/30412413 DC BS EN IEC 61452. Nuclear instrumentation. Measurement of gamma-ray emission rates of radionuclides. Calibration and use of germanium spectrometers
  • BS ISO 6502-3:2018 Rubber. Measurement of vulcanization characteristics using curemeters. Rotorless curemeter
  • BS ISO 11382:2011 Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 $Gmm to 25 $Gmm
  • BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
  • BS IEC 61275:2013 Radiation protection instrumentation. Measurement of discrete radionuclides in the environment. In situ photon spectrometry system using a germanium detector
  • BS DD ISO/TS 10868:2011 Nanotechnologies. Characterization of singlewall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
  • BS ISO 6502-2:2018 Tracked Changes. Rubber. Measurement of vulcanization characteristics using curemeters. Oscillating disc curemeter
  • BS ISO 6502-3:2023 Tracked Changes. Rubber. Measurement of vulcanization characteristics using curemeters. Rotorless curemeter
  • BS EN 61290-10-1:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
  • BS ISO 6502-1:2018 Tracked Changes. Rubber. Measurement of vulcanization characteristics using curemeters. Introduction
  • BS EN ISO 5530-1:2014 Wheat flour. Physical characteristics of doughs. Determination of water absorption and rheological properties using a farinograph
  • BS IEC 62533:2010 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
  • BS DD ISO/TS 11251:2010 Nanotechnologies. Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
  • PD IEC TR 61292-2:2003 Optical amplifier technical reports. Theoretical background for noise figure evaluation using the electrical spectrum analyzer
  • 22/30439528 DC BS ISO 6502-3. Rubber. Measurement of vulcanization characteristics using curemeters. Part 3. Rotorless curemeter
  • 20/30374680 DC BS EN ISO 5530-2. Wheat flour. Physical characteristics of doughs - Part 2. Determination of rheological properties using an extensograph
  • BS EN 16584-3:2017 Railway applications. Design for PRM use. General requirements. Optical and friction characteristics
  • BS EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1:Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
  • BS EN IEC 61280-1-3:2021 Fibre optic communication subsystem test procedures. General communication subsystems. Measurement of central wavelength, spectral width and additional spectral characteristics
  • 20/30374677 DC BS EN ISO 5530-1. Wheat flour. Physical characteristics of doughs - Part 1. Determination of water absorption and rheological properties using a farinograph
  • BS ISO 19056-3:2022 Microscopes. Definition and measurement of illumination properties - Incident light fluorescence microscopy with incoherent light sources
  • BS ISO 13196:2013 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
  • BS PD IEC/TR 61282-13:2014 Fibre optic communication system design guides. Guidance on in-service PMD and CD characterization of fibre optic links
  • BS EN ISO 13196:2015 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
  • BS IEC 62484:2010 Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
  • BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
  • BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
  • BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • BS EN ISO 20042:2021 Measurement of radioactivity. Gamma-ray emitting radionuclides. Generic test method using gamma-ray spectrometry
  • PD ISO/TS 9516-4:2021 Iron ores. Determination of various elements by X-ray fluorescence spectrometry. Performance-based method using fusion preparation method
  • 20/30421199 DC BS EN IEC 61280-1-3. Fibre optic communication subsystem test procedures. Part 1-3. General communication subsystems. Measurement of central wavelength, spectral width and additional spectral characteristics
  • BS EN IEC 61010-2-061:2021 Tracked Changes. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
  • PD ISO/PAS 13473-6:2021 Characterization of pavement texture by use of surface profiles. Verification of the performance of laser profilometers used for pavement texture measurements
  • BS EN IEC 62484:2021 Tracked Changes. Radiation protection instrumentation. Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material
  • BS EN ISO 18589-4:2021 Measurement of radioactivity in the environment. Soil - Plutonium 238 and plutonium 239 + 240. Test method using alpha spectrometry
  • BS ISO 20998-1:2006 Measurement and characterization of particles by acoustic methods - Concepts and procedures in ultrasonic attenuation spectroscopy
  • BS EN IEC 61010-2-061:2021+A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
  • 21/30395346 DC BS ISO 19056-3. Microscopes. Definition and measurement of illumination properties. Part 3. Incident light fluorescence microscopy with incoherent light sources
  • BS EN ISO 12625-7:2021 Tracked Changes. Tissue paper and tissue products. Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight)
  • BS 3730-2:1982 Assessment of departures from roundness - Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration)
  • BS 4317-22:1989 Methods of test for cereals and pulses. Determination of water absorption of flour and rheological properties of doughs using a valorigraph
  • BS EN 62109-2:2011 Safety of power converters for use in photovoltaic power systems. Particular requirements for inverters
  • BS EN ISO 19581:2020 Measurement of radioactivity. Gamma emitting radionuclides. Rapid screening method using scintillation detector gamma-ray spectrometry

Association Francaise de Normalisation, Spectrometer use characteristics

  • NF X30-495*NF EN 16424:2014 Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence intruments
  • NF T46-017-3*NF ISO 6502-3:2018 Rubber - Measurement of vulcanization characteristics using curemeters - Part 3 : rotorless curemeter
  • NF T46-017-2*NF ISO 6502-2:2018 Rubber - Measurement of vulcanization characteristics using curemeters - Part 2 : oscillating disc curemeter
  • NF ISO 6502-3:2023 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres - Partie 3 : rhéomètre sans rotor
  • NF ISO 6502-2:2018 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres- Partie 2 : rhéomètre à disque oscillant
  • NF V03-717-2*NF EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2 : determination of rheological properties using a extensograph
  • NF ISO 6502-1:2018 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide du rhéomètres - Partie 1 : introduction
  • NF EN ISO 5530-2:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 2 : détermination des caractéristiques rhéologiques au moyen de l'extensographe
  • NF EN 61290-10-1:2009 Amplificateurs optiques - Méthodes d'essai - Partie 10-1 : paramètres à canaux multiples - Méthode d'impulsion utilisant un interrupteur optique et un analyseur de spectre optique
  • NF EN 61290-10-2:2008 Amplificateurs optiques - Méthodes d'essai - Partie 10-2 : paramètres à canaux multiples - Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique
  • NF EN 61290-10-4:2007 Amplificateurs optiques - Méthodes d'essai - Partie 10-4 : paramètres à canaux multiples - Méthode par soustraction de source interpolée en utilisant un analyseur de spectre optique
  • NF EN ISO 5530-1:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 1 : détermination de l'absorption d'eau et des caractéristiques rhéologiques au moyen du farinographe
  • NF C93-805-10-2:2003 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer.
  • NF C93-805-10-2*NF EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer
  • NF X31-013:2013 Soil quality - Screening soils for selected elements by energy dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
  • NF C93-807-1-3*NF EN IEC 61280-1-3:2021 Fibre optic communication subsystem test procedures - Part 1-3 : general communication subsystems - Measurement of central wavelength, spectral width and additional spectral characteristics
  • NF C93-805-5-3*NF EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.
  • NF EN ISO 13196:2015 Qualité du sol - Analyse rapide d'une sélection d'éléments dans les sols à l'aide d'un spectromètre de fluorescence X à dispersion d'énergie portable ou portatif
  • NF V03-717-2:1998 Wheat flour. Physical characteristics of doughs. Part 2 : determination of rheological properties using an extensograph.
  • NF X30-446:2008 Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS).
  • NF F31-584-3*NF EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3 : optical and friction characteristics
  • NF EN IEC 61280-1-3:2021 Procédures d'essai des sous-systèmes de télécommunication fibroniques - Partie 1-3 : sous-systèmes généraux de télécommunication - Mesure de la longueur d'onde centrale, de la largeur spectrale et des caractéristiques spectrales supplément...
  • NF X31-013*NF EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
  • NF EN 16584-3:2017 Applications ferroviaires - Conception destinée à l'usage par les PMR - Exigences générales - Partie 3 : caractéristiques optiques et de friction
  • NF V03-717-1*NF EN ISO 5530-1:2015 Wheat flour - Physical characteristics of doughs - Part 1 : determination of water absorption and rheological properties using a farinograph
  • NF V03-717-1:1998 Wheat flour. Physical characteristics of doughs. Part 1 : determination of water absorption and rheological properties using a farinograph.
  • NF M60-836*NF EN ISO 20042:2021 Measurement of radioactivity - Gamma-ray emitting radionuclides - Generic test method using gamma-ray spectrometry
  • NF EN ISO 6719:2010 Anodisation de l'aluminium et de ses alliages - Mesurage des caractéristiques de réflectivité des surfaces d'aluminium à l'aide d'instruments à sphère d'intégration
  • NF C74-226*NF EN 61262-6:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 6 : determination of the contrast ratio and veiling glare index.
  • NF EN 302435-2:2010 Compatibilité électromagnétique et spectre radioélectrique (ERM) - Dispositifs à courte portée (SRD) - Caractéristiques techniques pour les SRD utilisant la technologie à bande ultralarge (UWB) - Applications dans les équipements de classifica...
  • NF EN 302435-1:2010 Compatibilité électromagnétique et spectre radioélectrique (ERM) - Dispositifs à courte portée (SRD) - Caractéristiques techniques pour les SRD utilisant la technologie à bande ultralarge (UWB) - Applications dans les équipements de classifica...
  • NF P84-705:2008 Geosynthetic barriers - Determination of the swelling, flow and permeability characteristics of geosysnthetic clay liners (GCL) using an oedopermeameter - Characterisation test and performance test.
  • NF T70-357:2007 Energetic materials for defence - Physico-chemical analysis and properties - Determination of metallic elements by atomic absorption spectrophotometry
  • NF A91-490*NF EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using agoniophotometer or an abridged goniophotometer
  • NF X30-429:2007 Characterization of waste and soil - Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection.
  • NF EN IEC 62484:2021 Instrumentation pour la radioprotection - Portiques spectrométriques de détection des rayonnements (SRPMs) utilisés pour la détection et l'identification du trafic illicite des matières radioactives
  • NF EN 62618:2017 Instrumentation pour la radioprotection - Détecteurs individuels spectroscopiques d'alarme aux rayonnements (SPRD) pour la détection du trafic illicite des matières radioactives
  • XP P98-832-5*XP CEN/TS 15901-5:2011 Road and airfield surface characteristics - Part 5 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK) : ROAR (Road Analyser and Recorder of Norsemeter)
  • NF EN 61290-5-3:2002 Amplificateurs à fibres optiques - Spécification de base - Partie 5-3 : méthodes d'essai des paramètres de réflectance - Tolérance de réflectance en utilisant un analyseur de spectre électrique
  • NF Q34-030-7*NF EN ISO 12625-7:2021 Tissue paper and tissue products - Part 7 : determination of optical properties - Measurement of brightness and colour with D65/10o (outdoor daylight)
  • NF C19-484*NF EN IEC 62484:2021 Radiation protection instrumentation - Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material
  • NF C74-224*NF EN 61262-4:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 4 : determination of the image distorsion.
  • NF C74-222*NF EN 61262-2:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 2 : determination of the conversion factor.
  • NF EN 302498-1:2011 Compatibilité électromagnétique et spectre radioélectrique (ERM) - Dispositifs à courte portée (SRD) - Caractéristiques techniques pour les SRD utilisant la technologie à bande ultralarge (UWB) - Applications de caractérisation et de discrimin...
  • NF EN 302498-2:2011 Compatibilité électromagnétique et spectre radioélectrique (ERM) - Dispositifs à courte portée (SRD) - Caractéristiques techniques pour les SRD utilisant la technologie à bande ultralarge (UWB) - Applications de caractérisation et de discrimin...
  • XP P98-832-2*XP CEN/TS 15901-2:2011 Road and airfield surface characteristics - Part 2 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL) : ROAR (Road Analyser and Recorder of Norsemeter)
  • NF C19-484*NF EN 62484:2016 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material

Group Standards of the People's Republic of China, Spectrometer use characteristics

  • T/CAIA YQ004-2018 Performance testing method for liquid chromatograph coupled with atomic fluorescence spectrometer
  • T/CAIA YQ003-2016 Testing Methods for Optical/Electrical Characteristics of Linear Charge Coupled Imaging Device for Spectrometer

Korean Agency for Technology and Standards (KATS), Spectrometer use characteristics

  • KS C IEC 61452-2017(2022) Nuclear instrumentation — Measurement of gamma-ray emission rates of radionuclides — Calibration and use of germanium spectrometers
  • KS C IEC 61275:2005 Radiation protection instrumentation-Measurement of discrete radionuclides in the environment-In situ photon spectrometry system using a germanium detector
  • KS C IEC 61275:2016 Radiation protection instrumentation-Measurement of discrete radionuclides in the environment-In situ photon spectrometry system using a germanium detector
  • KS C IEC 61452:2017 Nuclear instrumentation — Measurement of gamma-ray emission rates of radionuclides — Calibration and use of germanium spectrometers
  • KS C IEC 61275-2016(2021) Radiation protection instrumentation-Measurement of discrete radionuclides in the environment-In situ photon spectrometry system using a germanium detector
  • KS C IEC 61290-10-1:2005 Optical amplifiers-Test methods-Part 10-1:Multichannel parameters-Pulse method using an optical switch and optical spectrum analyzer
  • KS C IEC 61290-10-2:2005 Optical amplifiers-Test methods-Part 10-2:Multichannel parameters-Pulse method using a gated optical spectrum analyzer
  • KS D ISO 18118:2005 Surface chemical analysis-Auger electron spectroscopy and X-ray photoelectron spectroscopy-Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • KS B ISO 8600-2-2016(2021) Optics and optical instruments-Medical endoscopes and endoscopic accessories-Part 2:Particular requirements for rigid bronchoscopes
  • KS D ISO 15632:2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
  • KS B ISO 18175:2005 Non-destructive testing-Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
  • KS B ISO 18175:2021 Non-destructive testing — Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
  • KS C IEC 61290-5-3:2003 Basic specification for optical amplifier test methods-Part 5-3:Test methods for reflectance parameters-Reflectance tolerance using an electrical spectrum analyser
  • KS C IEC 62484-2014(2019) Radiation protection instrumentation — Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
  • KS C IEC 62484:2014 Radiation protection instrumentation — Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material

KR-KS, Spectrometer use characteristics

  • KS C IEC 61452-2017 Nuclear instrumentation — Measurement of gamma-ray emission rates of radionuclides — Calibration and use of germanium spectrometers
  • KS C IEC 61275-2016 Radiation protection instrumentation-Measurement of discrete radionuclides in the environment-In situ photon spectrometry system using a germanium detector
  • KS B ISO 8600-2-2016 Optics and optical instruments-Medical endoscopes and endoscopic accessories-Part 2:Particular requirements for rigid bronchoscopes
  • KS D ISO 15632-2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
  • KS B ISO 18175-2021 Non-destructive testing — Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments

American Society for Testing and Materials (ASTM), Spectrometer use characteristics

  • ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM E902-05 Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
  • ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM E902-94(1999) Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
  • ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
  • ASTM E2872-14(2019) Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
  • ASTM E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
  • ASTM E2056-04(2016) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
  • ASTM D5647-95 Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
  • ASTM D5647-01 Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
  • ASTM F1708-96 Standard Practice for Evaluation of Granular Polysilicon by Meter-Zoner Spectroscopies
  • ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
  • ASTM E2143-01(2013) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
  • ASTM D6601-12 Standard Test Method for Rubber Propertiesmdash;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
  • ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
  • ASTM D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
  • ASTM D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
  • ASTM G178-16(2023) Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
  • ASTM D2743-68(1998) Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
  • ASTM E1260-95 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
  • ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014;Measurement of Processing Properties Using Capillary Rheometry
  • ASTM D7418-12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM E2143-01(2021) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
  • ASTM E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
  • ASTM D7271-06 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
  • ASTM E2120-10 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
  • ASTM D6277-07 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM F1710-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM D6277-07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM E317-94 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Examination Instruments and Systems Without the Use of Electronic Measurement Instruments
  • ASTM D7271-06(2012) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
  • ASTM E1260-03 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
  • ASTM E1260-03(2020) Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
  • ASTM D3999-91(1996) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
  • ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
  • ASTM F3493-23 Standard Practice for Measuring Dynamic Characteristics of Water Slide Systems Using Instrumented Humans
  • ASTM A1036-04(2015) Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
  • ASTM UOP407-09 Trace Metals in Organics by Dry Ashing - ICP-OES
  • ASTM E2120-00 Standard Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
  • ASTM D7889-13 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
  • ASTM D5289-06 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
  • ASTM D8490-23a Standard Test Method for Determining the Pore Size Characteristics of Geotextiles Using an Optical Method
  • ASTM D6204-12 Standard Test Method for Rubbermdash;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
  • ASTM D6187-97 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
  • ASTM F2405-04 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
  • ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM E2872-14 Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
  • ASTM D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
  • ASTM D6601-02 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
  • ASTM D6601-19 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
  • ASTM F1702-10 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
  • ASTM D6756-09a Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
  • ASTM E2977-15 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
  • ASTM F1702-96 Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus
  • ASTM F1702-96(2002)e1 Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus

Professional Standard - Energy, Spectrometer use characteristics

  • NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, Spectrometer use characteristics

  • SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Spectrometer use characteristics

  • IEEE N42.14-1991 Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides

Professional Standard - Electron, Spectrometer use characteristics

  • SJ/T 10714-1996 Standard practice for checking the operation characteristics of X-ray photoelectron spectrometers
  • SJ/Z 3206.3-1989 Instrument and its performance requirements for determination of emision spectrum

RU-GOST R, Spectrometer use characteristics

  • GOST 28795-1990 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using an alveograph
  • GOST 33441-2015 Vegetable oils. Determination of quality and safety by near infrared spectrometry
  • GOST ISO 5530-2-2014 Wheat flour. Physical characteristics of doughs. Part 2. Determination of rheological properties using an extensograph
  • GOST ISO 5530-1-2013 Wheat flour. Physical characteristics of doughs. Part 1. Determination of water absorption and rheological properties using farinograf

German Institute for Standardization, Spectrometer use characteristics

  • DIN EN 16424:2015 Characterization of waste - Screening methods for the element composition by portable X-ray fluorescence instruments; German version EN 16424:2014
  • DIN EN 15483:2009-02 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy; German version EN 15483:2008
  • DIN IEC 61452:2023-02 Nuclear instrumentation - Measurement of activity or emission rate of gamma-ray emitting radionuclides - Calibration and use of germanium-based spectrometers (IEC 61452:2021)
  • DIN 5030-5:1987 Spectral measurement of radiation; physical detectors for spectral measurement of radiation; terminology, characteristic quantities, selection criteria
  • DIN EN ISO 5530-2:2015-03 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014 / Note: To be replaced by DIN EN ISO 5530-2 (2020-06).
  • DIN EN ISO 5530-2:2020-06 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020 / Note: Date of issue 2020-05-08*Intended as replacement for...
  • DIN IEC 61275:2014 Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In situ photon spectrometry system using a germanium detector (IEC 61275:2013)
  • DIN IEC 62484:2014 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material (IEC 62484:2010)
  • DIN EN ISO 5530-1:2020-06 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO/DIS 5530-1:2020); German and English version prEN ISO 5530-1:2020 / Note: Date of issue 2020-05-08*Intended...
  • DIN EN ISO 5530-1:2015-03 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013); German version EN ISO 5530-1:2014 / Note: To be replaced by DIN EN ISO 5530-1 (2020-06).
  • DIN EN 61290-10-1:2010-01 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009 / Note: DIN EN 61290-10-1 (2004-02) remains valid along...
  • DIN EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008
  • DIN EN 61290-10-4:2008-02 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007); German version EN 61290-10-4:2007 / Note: Applies in conjunction with DIN EN 61291...
  • DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
  • DIN EN ISO 5530-2:2020 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020
  • DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
  • DIN EN ISO 5530-1:2020 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO/DIS 5530-1:2020); German and English version prEN ISO 5530-1:2020
  • DIN EN 15309:2007 Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence; English version of DIN EN 15309:2007-08
  • DIN 25462:2000 In-situ-gamma-ray spectrometry for nuclide specific environmental measurements
  • DIN EN 16584-3:2022 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics; German and English version prEN 16584-3:2022
  • DIN EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics
  • DIN EN 16584-3:2017-03 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics; German version EN 16584-3:2017 / Note: To be replaced by DIN EN 16584-3 (2022-06).
  • DIN EN 16584-3:2022-06 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics; German and English version prEN 16584-3:2022 / Note: Date of issue 2022-05-13*Intended as replacement for DIN EN 16584-3 (2017-03).
  • DIN EN ISO 13196:2015-11 Soil quality - Sreening soils for selected elements by energy-dipersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013); German version EN ISO 13196:2015
  • DIN EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014
  • DIN EN ISO 5530-1:2015 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013); German version EN ISO 5530-1:2014
  • DIN 53019-4:2016-10 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
  • DIN EN ISO 6719:2011-02 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010); German version EN ISO 6719:2010
  • DIN EN ISO 11543:2002-06 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry (ISO 11543:2000); German version EN ISO 11543:2002
  • DIN EN 61290-10-1:2010 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009
  • DIN EN 302454-1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Meteorological Aids (Met Aids) - Radiosondes to be used in the 1668,4 MHz to 1690 MHz frequency range - Part 1: Technical characteristics and test methods (Endorsement of the English version
  • DIN EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dipersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013); German version EN ISO 13196:2015
  • DIN 38413-6:2007 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 6: Determination of acrylamide - Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6)
  • DIN 25482-4:1995 Limit of detection and limit of decision for nuclear radiation measurements - Part 4: Counting alphaspectrometric measurements, neglecting the influence of sample treatment and equipment used
  • DIN EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010); German version EN ISO 7759:2010
  • DIN EN ISO 10703:2022-11 Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry (ISO 10703:2021); German version EN ISO 10703:2021

Danish Standards Foundation, Spectrometer use characteristics

  • DS/EN 15483:2009 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
  • DS/ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
  • DS/EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
  • DS/EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
  • DS/EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
  • DS/ISO 5530-1:2013 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph
  • DS/EN IEC 61280-1-3:2021 Fibre optic communication subsystem test procedures – Part 1-3: General communication subsystems – Measurement of central wavelength, spectral width and additional spectral characteristics
  • DS/ISO 13196:2013 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
  • DS/EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • DS/ISO/IEC 11694-6:2007 Identification cards - Optical memory cards - Linear recording method - Part 6: Use of biometrics on an optical memory card
  • DS/CEN/TS 15901-2:2011 Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and Recorder of Norsemeter)
  • DS/CEN/TS 15901-5:2011 Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter)
  • DS/EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser

Lithuanian Standards Office , Spectrometer use characteristics

  • LST EN 15483-2009 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
  • LST ISO 5530-1:2004 Wheat flour. Physical characteristics of doughs. Part 1: Determination of water absorption and rheological properties using a farinograph
  • LST EN ISO 10703:2021 Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry (ISO 10703:2021)
  • LST ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012, identical)
  • LST EN 61290-10-1-2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009)
  • LST EN 61290-10-2-2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007)
  • LST EN 61290-10-4-2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007)
  • LST EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)
  • LST EN ISO 11543:2003 Modified starch - Determination of hydroxypropyl content - Method using proton Nuclear Magnetic Resonance (NMR) spectrometry (ISO 11543:2000)
  • LST EN ISO 6719:2011 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)
  • LST EN ISO 20042:2021 Measurement of radioactivity - Gamma-ray emitting radionuclides - Generic test method using gamma-ray spectrometry (ISO 20042:2019)

AENOR, Spectrometer use characteristics

  • UNE-EN 15483:2009 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
  • UNE-EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)
  • UNE-EN ISO 5530-1:2015 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013)
  • UNE-EN ISO 6719:2011 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)
  • UNE-EN ISO 11543:2002 Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry. (ISO 11543:2000)

Institute of Electrical and Electronics Engineers (IEEE), Spectrometer use characteristics

  • IEEE/ANSI N42.14-1999 Calibration and use of germanium spectrometers for the measurement of gammma-ray emission rates of radionuclides
  • ANSI Std N42.14-1991 American National Standard Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides
  • IEEE N42.14-1999 Calibration and use of germanium spectrometers for the measurement of gammma-ray emission rates of radionuclides
  • IEEE N42.14-1990 Calibration and use of germanium spectrometers for the measurement of gammma-ray emission rates of radionuclides

Japanese Industrial Standards Committee (JISC), Spectrometer use characteristics

  • JIS K 6296-2:2023 Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 2: Oscillating disc curemeter
  • JIS K 6296-3:2023 Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 3: Rotorless curemeter
  • JIS K 6296-1:2023 Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 1: Introduction
  • JIS C 6122-10-2:2010 Optical amplifiers -- Test methods -- Part 10-2: Multichannel parameters -- Pulse method using a gated optical spectrum analyzer

VN-TCVN, Spectrometer use characteristics

  • TCVN 7848-2-2015 Wheat flour - Physical characteristics of doughs .Part 2:Determination of rheological properties using an extensograph
  • TCVN 7848-1-2015 Wheat flour - Physical characteristics of doughs .Part 1:Determination of water absorption and rheological properties using a farinograph

European Committee for Electrotechnical Standardization(CENELEC), Spectrometer use characteristics

  • EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
  • EN 61290-5-3:2002 Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser
  • EN 62484:2015 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material

IT-UNI, Spectrometer use characteristics

  • UNI EN ISO 10703:2021 Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry.
  • UNI EN ISO 20042:2021 Measurement of radioactivity - Gamma-ray emitting radionuclides - Generic test method using gamma-ray spectrometry

European Committee for Standardization (CEN), Spectrometer use characteristics

  • EN ISO 23216:2022 Carbon based films - Determination of optical properties of amorphous carbon films by spectroscopic ellipsometry (ISO 23216:2021)
  • FprEN ISO 5530-2 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/FDIS 5530-2:2021)
  • FprEN ISO 5530-1:2021 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO/FDIS 5530-1:2021)
  • FprEN ISO 5530-1 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO/FDIS 5530-1:2021)
  • EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
  • EN 12373-13:2000 Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer
  • EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013)
  • prEN ISO 13196 rev Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
  • EN 15192:2006 Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
  • CEN/TS 15901-14:2016 Road and airfield surface characteristics - Part 14: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)

API - American Petroleum Institute, Spectrometer use characteristics

  • API REPORT 81-34-1983 Spectrum Fatigue Properties of Welded Steel as Applicable to Offshore Structures
  • API REPORT 80-34-1982 Spectrum Fatique Properties of Welded Steel as Applicable to Offshore Structures (Errata)

CENELEC - European Committee for Electrotechnical Standardization, Spectrometer use characteristics

  • EN 61290-10-1:2003 Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer
  • EN 61290-10-2:2003 Optical amplifiers - Test methods Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
  • EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer

ES-UNE, Spectrometer use characteristics

  • UNE-EN 61290-10-1:2009 Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (Endorsed by AENOR in July of 2009.)
  • UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
  • UNE-CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-EN IEC 61280-1-3:2021 Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Measurement of central wavelength, spectral width and additional spectral characteristics (Endorsed by Asociación Española de Normalización in October...
  • UNE-EN 61290-10-4:2007 Optical amplifiers - Test methods -- Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007). (Endorsed by AENOR in November of 2007.)
  • UNE-EN 16584-3:2019 Railway Applications - Design for PRM Use - General Requirements - Part 3: Optical and Friction Characteristics
  • UNE-EN ISO 13196:2015 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument (ISO 13196:2013) (Endorsed by AENOR in September of 2015.)
  • UNE-EN ISO 20042:2021 Measurement of radioactivity - Gamma-ray emitting radionuclides - Generic test method using gamma-ray spectrometry (ISO 20042:2019) (Endorsed by Asociación Española de Normalización in September of 2021.)
  • UNE-EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification -- Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser. (Endorsed by AENOR in October of 2002.)
  • UNE-EN IEC 62484:2021 Radiation protection instrumentation - Spectrometric radiation portal monitors (SRPMs) used for the detection and identification of illicit trafficking of radioactive material (Endorsed by Asociación Española de Normalización in January of 2022.)
  • UNE-EN 62484:2015 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material (Endorsed by AENOR in January of 2016.)
  • UNE-EN ISO 19581:2020 Measurement of radioactivity - Gamma emitting radionuclides - Rapid screening method using scintillation detector gamma-ray spectrometry (ISO 19581:2017) (Endorsed by Asociación Española de Normalización in April of 2020.)
  • UNE-EN ISO 10703:2021 Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry (ISO 10703:2021) (Endorsed by Asociación Española de Normalización in September of 2021.)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectrometer use characteristics

  • GB/Z 42625-2023 Vacuum Technology Vacuum Gauges Quadrupole Mass Spectrometer Characteristics for Partial Pressure Measurements

PL-PKN, Spectrometer use characteristics

  • PN ISO 8322-3:1993 Building construction. Measuring instruments. Procedures for determining accuracy in use. Part 3. Optical levelling instruments
  • PN C99041-02-1990 Developing kits for colour photographic materials Qualitative and usable characteristic of developing kits for colour photographic papers FOTONKOLOR
  • PN Z70073-1989 Radiation protection in underground ining plants etermination of concentrations of atural radioactive nuckides in nderground sediments with use of amma-ray spectrometry

CH-SNV, Spectrometer use characteristics

  • SN EN ISO 10703:2021 Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry (ISO 10703:2021)
  • SN EN ISO 20042:2021 Measurement of radioactivity - Gamma-ray emitting radionuclides - Generic test method using gamma-ray spectrometry (ISO 20042:2019)

U.S. Military Regulations and Norms, Spectrometer use characteristics

  • ARMY MS35522-1956 ENAMEL, AIRCRAFT, GLOSS; COLORS, CONTAINER SIZES, AND USE CHARACTERISTICS THEREOF

International Telecommunication Union (ITU), Spectrometer use characteristics

  • ITU-T V.31BIS-1988 Electrical characteristics for single-current interchange circuits using optocouplers
  • ITU-R RAPPORT SM.2048 FRENCH-2004 Use of the x dB bandwidth criterion for determination of spectral properties of a transmitter in the out-of-band domain
  • ITU-R REPORT SM.2048-2004 Use of the x dB bandwidth criterion for determination of spectral properties of a transmitter in the out-of-band domain
  • ITU-R INFORME SM.2048 SPANISH-2004 Use of the x dB bandwidth criterion for determination of spectral properties of a transmitter in the out-of-band domain
  • ITU-R REPORT F.2059-2005 Antenna characteristics of point-to-point fixed wireless systems to facilitate coordination in high spectrum use areas

IN-BIS, Spectrometer use characteristics

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Spectrometer use characteristics

  • REPORT SM.2048-2004 Use of the x dB bandwidth criterion for determination of spectral properties of a transmitter in the out-of-band domain
  • REPORT M.2204-2010 Characteristics and spectrum considerations for sense and avoid systems use on unmanned aircraft systems
  • REPORT F.2059-2005 Antenna characteristics of point-to-point fixed wireless systems to facilitate coordination in high spectrum use areas

(U.S.) Ford Automotive Standards, Spectrometer use characteristics

  • FORD WSS-M98D34-A-2010 THERMOPLASTIC POLYURETHANE (TPU) FORMED INSTRUMENT PANEL ASSEMBLY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M1H1161-A3-2014 FABRIC, SPECTRAL PATTERN, JACQUARD WOVEN, UNLAMINATED. WITH ANTI SOILING TREATMENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1H1161-A1)
  • FORD WRS-M1H1161-A4-2014 FABRIC, SPECTRAL PATTERN, JACQUARD WOVEN, 26% PIR/PCR UNLAMINATED. WITH ANTI SOILING TREATMENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M1H1161-A1)
  • FORD WSS-M11P67-A1-2021 PERFORMANCE, DIRECT GLAZING ADHESIVE, ONE COMPONENT, POLYURETHANE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M36J3-A-2012 ENAMEL, THERMOSET, TWO-COMPONENT COLOR COAT, EXTERIOR, LOW GLOSS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD SK-M1P9103-A-2006 DECORATIVE ELECTROPLATING ON STEEL, BLACK OR LOW GLOSS BLACK ***TO BE USED WITH FORD WSS-M99P1111-A***

CEN - European Committee for Standardization, Spectrometer use characteristics

  • EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics

Standard Association of Australia (SAA), Spectrometer use characteristics

  • AS/NZS 3580.15:2014
  • AS/NZS 4356.5:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the detective quantum efficiency
  • AS 4479.4:1999 Analysis of soils - Determination of metals in aqua regia extracts of soil by inductively coupled plasma-atomic emission spectrometry

AT-OVE/ON, Spectrometer use characteristics

  • OVE EN IEC 61280-1-3:2021 Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Measurement of central wavelength, spectral width and additional spectral characteristics (IEC 86C/1701/CDV)

American National Standards Institute (ANSI), Spectrometer use characteristics

  • ANSI/ASTM A773/A 773M:2001 Test Method for D-C Magnetic Properties of Materials Using Ring and Permeameter Procedures with D-C Electronic Hysteresigraphs

Canadian Standards Association (CSA), Spectrometer use characteristics

  • CAN/CSA-ISO/IEC 11694-6:2015 Identification cards - Optical memory cards - Linear recording method - Part 6: Use of biometrics on an optical memory card

ES-AENOR, Spectrometer use characteristics

AT-ON, Spectrometer use characteristics

  • OENORM EN ISO 20042:2021 Measurement of radioactivity - Gamma-ray emitting radionuclides - Generic test method using gamma-ray spectrometry (ISO 20042:2019)

AASHTO - American Association of State Highway and Transportation Officials, Spectrometer use characteristics

  • TP5-1993 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Edition 1B)

GOSTR, Spectrometer use characteristics

  • GOST R 58400.10-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method for determination of the properties using a dynamic shear rheometer (DSR)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Spectrometer use characteristics

  • GB/T 36082-2018 Nanotechnologies—Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening—FT-IR method




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved