ZH
RU
ES

Detection method of lithium in catalyst

Detection method of lithium in catalyst, Total:398 items.

In the international standard classification, Detection method of lithium in catalyst involves: Analytical chemistry, Products of the chemical industry, Non-ferrous metals, Particle size analysis. Sieving, Paint ingredients, Measurement of volume, mass, density, viscosity, Textile auxiliary materials, Internal combustion engines for road vehicles, Waxes, bituminous materials and other petroleum products, Air quality, Surface treatment and coating, Inorganic chemicals, Lubricants, industrial oils and related products, Fuels, Water quality, Materials and articles in contact with foodstuffs, Plastics, Glass, Testing of metals, Leather technology, Animal feeding stuffs, Electronic components in general, Microbiology, Ceramics, Construction materials, Measurement of fluid flow, Edible oils and fats. Oilseeds, Milk and milk products, Metalliferous minerals, Welding, brazing and soldering, Organic chemicals, General methods of tests and analysis for food products, Beverages, Paints and varnishes, Petroleum products in general, Protection against fire, Pesticides and other agrochemicals, Protection against dangerous goods, Insulating fluids, Sterilization and disinfection, Natural gas, Corrosion of metals, Raw materials for rubber and plastics, Test conditions and procedures in general, Furniture.

American Society for Testing and Materials (ASTM), Detection method of lithium in catalyst

ASTM D5153-91(1997) Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM UOP333-10 Fines in Catalysts and Catalyst Supports by Sieve Analysis
ASTM D7964/D7964M-14 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
ASTM D7964/D7964M-19 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
ASTM D4642-04(2010) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D3943-21 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D6761-22 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-02 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-07(2012) Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-17 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-22a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D4782-10 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D6761-07 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D4642-04 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D4642-92(1998) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D4642-04(2016) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D7084-04 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D7084-04(2009) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D4782-04 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM UOP436-87 Silica in Catalysts by Gravimetric Procedure
ASTM D6761-04a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D6761-04 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D7084-04(2017) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D7084-18 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D4284-12(2017)e1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM D4782-10(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D4782-91(1997) Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM UOP742-86 Sulfate in Catalyst by a Gravimetric Method
ASTM D3907-03 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D3907-03(2008) Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4179-11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM UOP703-09 Carbon on Catalysts by Induction Furnance Combustion and Infrared Detection
ASTM D4438-13(2018)e1 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D4699-03(2018) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D3907/D3907M-19 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4780-12(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM D4481-21 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D4481-10 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D3943-10 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D4438-13 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM D3907/D3907M-13 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D5153-04 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM D4780-12 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM D4284-12 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM UOP274-94 Platinum in Fresh Catalysts by Spectrophotometry
ASTM UOP865-86 Phosphorus in Catalysts by Visible Spectrophotometry
ASTM UOP274-13 Platinum in Fresh Catalysts by Spectrophotometry
ASTM UOP592-85 Palladium in Catalysts by Visible Spectrophotometry
ASTM UOP823-90 Platinum in Fresh Platinum-Rhenium Catalysts by Spectrophotometry
ASTM D3908-03 Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method
ASTM D3943-00 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D3943-04 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D4926-20 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
ASTM D7085-04e1 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D7085-04 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D7085-04(2010)e1 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D5153-10 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM D5153-10(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM D3610-22 Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D3610-00(2015) Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D4222-03(2008) Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D4481-04 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D4481-10(2015) Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D3943-10(2015) Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D4824-94(1999) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4824-13(2018) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D5154/D5154M-18 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D5154-10 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4481-97 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D7085-04(2018) Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
ASTM D4567-03 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-99 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2013) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4222-03(2015)e1 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D3610-00 Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D3610-00(2004) Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D3907-92 Standard Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test (Withdrawn 2001)
ASTM D4222-20 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D4824-03 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4824-03(2008) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D4567-19 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D5154-03 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D5154-05 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D5153-22 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry
ASTM D3610-00(2010) Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D5154-91 Standard Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4824-13 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D2613-01(2006) Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
ASTM D2613-85(1994)e1 Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
ASTM D2613-01 Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
ASTM D2613-01(2012) Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
ASTM D3969-01(2012) Standard Test Method for Zirconium in Paint Driers by EDTA Method
ASTM UOP925-16 Nickel, Molybdenum, Phosphorus, Cobalt and Aluminum in Fresh Catalysts by ICP-OES
ASTM D4926-15 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
ASTM D5757-11(2017) Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
ASTM D5757-22 Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
ASTM UOP291-02 Total Chloride in Alumina and Silica-Alumina Catalysts by Potentiometric Titration
ASTM D3908-03(2008) Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
ASTM UOP979-02 Total Chloride in Alumina Supported Catalysts by Wavelength Dispersive X-Ray Fluorescence
ASTM D4926-89(1994)e1 Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-Ray Powder Diffraction
ASTM UOP833-82 Molybdenum in Platforming Catalysts and Fines by Atomic Absorption Spectrophotometry
ASTM D4284-07 Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry
ASTM D7098-08 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7098-21 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D4365-95(2007)e1 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-95(2001) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-95 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-95(2008) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-13 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4284-03 Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry
ASTM D4365-19 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D3908-99 Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method
ASTM UOP387-62 Arsenic in Petroleum Stocks and Catalysts by Spectrophotometry (Withdrawn 2011)
ASTM D4780-95(2007) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM D4780-95 Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM D7098-05 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7098-06e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7098-06 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D7098-08e1 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D4780-95(2001) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM D5757-11 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
ASTM UOP291-13 Total Chloride in Alumina and Silica-Alumina Catalysts by Microwave Digestion and Potentiometric Titration
ASTM D8361-20 Standard Test Method for Total Organic Carbon in Water by Two Stage Wet Chemical Catalyzed Hydroxyl Radical Oxidation with Infra-Red Detection of Resulting Carbon Dioxide
ASTM D3989-01(2012) Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
ASTM D7098-08(2015) Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
ASTM D8083-16 Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
ASTM D3908-20 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
ASTM D8083-16(2023) Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
ASTM UOP291-15 Total Chloride in Alumina and Silica-Alumina Catalysts by Microwave Digestion and Potentiometric Titration
ASTM D4222-03 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM D4222-98 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM D5757-00(2006) Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
ASTM D5757-00 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
ASTM D8088-16(2022) Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emissio
ASTM D8088-16 Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emissio
ASTM D1977-16 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM D7573-18 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM D7573-18a Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM D7573-09(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM D7573-18ae1 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
ASTM D1977-03 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM D1977-03(2008) Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM D1977-98 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM D1977-22 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM D6019-20 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
ASTM D3970-05(2023) Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
ASTM D6019-96(2006) Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
ASTM D6019-96 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
ASTM D6019-96(2001) Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
ASTM E299-17 Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
ASTM E299-17a Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
ASTM D601-87(1998) Test Method for Determination of Chromium Oxide in Basic Chrome Tanning Solvents
ASTM D5599-15 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D3970-80(1999) Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
ASTM D3970-05 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
ASTM D3970-05(2011) Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
ASTM D2982-07(2019) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D5346-17(2021) Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
ASTM D7423-09(2014) Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM D7423-16 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM D2982-98 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D2982-98e1 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D2982-98(2004) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D2982-07 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D2982-07(2013) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D5346-93(1997) Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
ASTM D7493-08 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM B577-93(2004) Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
ASTM B577-19 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
ASTM D6019-10 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
ASTM D8284-19 Standard Test Method for Determination of the Total Alkalinity in Sulfated, Sulfonated Oils and Fatliquors
ASTM D6019-15 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
ASTM D5176-91(2003) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D5176-91(1995) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D5176-08 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D4129-05(2020) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM D5176-20 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D5176-08(2015) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D4367-22 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography
ASTM D5623-94(2004)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D4810-06 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D4810-88(1999) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D4810-20 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D7457-11e1 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
ASTM E1357-90(2001) Standard Test Method for Determining the Rate of Bioleaching of Iron From Pyrite by Thiobacillus Ferrooxidans
ASTM G3-89(2004) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM G3-89(2010) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM D6953-03 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
ASTM D7184-12 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-13 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D5623-94(2009) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D3970-05(2017) Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
ASTM D4810-06(2015) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D4984-89(1999) Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D4984-20 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D7527-10(2018) Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
ASTM D7527-10 Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
ASTM D5599-22 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D1290-95 Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D1290-95(2002) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D1290-95(2008) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D5317-20 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
ASTM D5317-98(2017) Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector

工业和信息化部, Detection method of lithium in catalyst

HG/T 5769-2021 Determination method of copper in copper-based waste catalysts
HG/T 5705-2020 Determination of titanium dioxide phase content in hydrogenation catalysts by X-ray diffraction method
HG/T 5591-2019 Method for determination of acidic sites of methanol to light olefins catalysts
HG/T 5404-2018 Determination of phthalates in olefin polymerization catalysts by gas chromatography
HG/T 5594-2019 Determination of carbon and sulfur in petroleum refining catalysts by high frequency combustion infrared absorption method
HG/T 6054-2022 Determination of platinum content in reforming catalysts by inductively coupled plasma optical emission spectrometry
HG/T 5763-2020 Determination of metal elements in metallocene polyolefin catalysts by inductively coupled plasma optical emission spectrometry
YS/T 832-2020 Chemical analysis method for butyl-octyl alcohol spent catalyst Determination of rhodium content by inductively coupled plasma atomic emission spectrometry

Professional Standard - Chemical Industry, Detection method of lithium in catalyst

HG/T 5764～5767-2020 Determination of pore structure of petroleum refining catalysts, determination of metal elements in catalytic cracking catalysts, test methods for catalyst activity of supported rosin disproportionation and catalysts for cobalt and molybdenum sulfide (202
HG/T 5189~5193-2017 Analysis methods for chemical composition of organic sulfur conversion and absorption catalysts at room temperature and methanol hydrogen production catalysts, test methods for reaction performance of methanol to propylene catalysts, chemical composition
HG/T 5756～5758-2020 Analytical methods for chemical composition of catalysts for selective hydrogenation of benzene to cyclohexene, analytical methods for chemical composition of aluminum-based hydrogenation catalysts, and determination of reduction degree of catalysts for a
HG/T 5589～5593-2019 Propylene polymerization catalyst and methacrolein oxidation to methacrylic acid catalyst chemical composition analysis method, methanol to light olefin catalyst thermal wear index test method and acid site determination method and aluminum-based desulfur
HG/T 6149-2023 Determination of Silica Crystal Phase Content in Hydrogenation Catalyst and Its Support X-ray Diffraction Method

国家能源局, Detection method of lithium in catalyst

SH/T 0961-2017 Determination of alumina content in catalytic cracking catalyst EDTA volumetric method
SH/T 0962-2017 Determination of sodium oxide content in catalytic cracking catalysts by flame photometry
SH/T 0963-2017 Determination of iron oxide content in catalytic cracking catalyst - phenanthroline spectrophotometry
SH/T 0950-2017 Determination of lanthanum oxide and cerium oxide content in catalytic cracking catalysts by X-ray fluorescence spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Detection method of lithium in catalyst

GB/T 33104-2016 Test method for honeycomb catalyst for removal of NOx of marine SCR
GB/T 33410-2016 Determination of the activity of protease K in biochemical reagents

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Detection method of lithium in catalyst

GB/T 23277-2009 Chemical analysis methods of catalysts containing precious metals. Determination of platinum，palladium and rhodium in automobile exhaust-purifying catalysts.Spectrophotometry
GB/T 5548-1985 Resin finishing agent--Method of determination for the stability of solution after adding catalyst
GB 5548-1985 Method for Determination of Solution Stability of Resin Finishing Agent Added Catalyst
GB/T 23524-2009 Test method of spent petrochemical catalyst.Determination of platinum.Inductively coupled plasma atomic emission spectrometry
GB/T 30014-2013 Methods for chemical analysis of spent palladium-carbon.Determination of palladium.Inductively coupled plasma atomic emission spectrometry
GB/T 17418.4-2010 Methods for analysis of noble metals in geochemical samples.Part 4:Deternination of iridium content.Preconcentration by thiourea-catalytic spectrphotometric method
GB/T 17418.2-2010 Methods for analysis of noble metals in geochemical samples.Part 2:Determination of platinum and rhodium content.Preconcentration by thiourea-catalytic polarographic method
GB/T 17418.5-2010 Methods for analysis of noble metals in geochemical samples.Part 5:Determination of ruthenium and osmium content.Separationby distillation-catalytic spectrophometric method
GB/T 23767-2009 General method for measuring solid chemicals fire limits in gaseous oxidants
GB/T 23773-2009 Inorganic chemicals for industrial use.General method for determination of Ammonium content.Nessler's reagent colorimetric method
GB/T 16083-1995 Workplace air--Determination of carbon tetrachloride--Solvent desorption gas chromatographic method

RU-GOST R, Detection method of lithium in catalyst

GOST 12597-1967 Sorbents. Method for determination of moisture fraction of mass in activated carbons and catalysts on their base
GOST R ISO 17489-2017 Leather. Chemical tests. Method for determination of tan content in synthetic tanning agents
GOST 28687-2016 Reagents. Method for determination of peroxides in organic solvents
GOST 14618.3-1978 Essential oils, aromatics and their intermediates. Methods for determination of peroxides
GOST R 56999-2016 Disinfectology and disinfection activities. Chemical disinfectants and antiseptics. Method for the determination of chlorine dioxide in drinking water
GOST 14618.2-1978 Essential oils, aromatics and their intermediates. Methods for determination of carbonyl compounds (aldehydes and ketones)
GOST 9.514-1999 Unified system of corrosion and ageing protection. Corrosion inhibitors of metals for water systems. Electrochemical method pretective ability evaluation
GOST 14618.4-1978 Essential oils, aromatics and their intermediates. Methods for determination of unsaturated compounds

PL-PKN, Detection method of lithium in catalyst

PN C89651-1986 Catalysts Method of testing Detcrmination of porosity

Professional Standard - Hygiene , Detection method of lithium in catalyst

WS/T 35-1996 Urine.Determination of vanadium.Catalytic polorographic method

Professional Standard - Electricity, Detection method of lithium in catalyst

DL/T 2279-2021 Powder method for detection of sulfur dioxide oxidation rate of flue gas denitrification catalysts in thermal power plants
DL/T 1823-2018 On-site detection method of mineral oil, hydrolyzable fluoride and acidity in sulfur hexafluoride gas

American National Standards Institute （ANSI), Detection method of lithium in catalyst

ASTM D4180-23 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D4699-23 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ANSI/ASTM D4755:1995 Test Method for Free Halogens in Halogenated Organic Solvents and their Admixtures
ANSI/ASTM D5524:1994 Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography

German Institute for Standardization, Detection method of lithium in catalyst

DIN 55901:2018 Driers for paints and varnishes - Methods for determination of metal contents of mixed driers
DIN 53240-1:2013 Determination of hydroxyl value - Part 1: Method without catalyst
DIN 51815-1:1981 Testing of lubricants; determination of the content of lithium, sodium and calcium of greases; determination by atomic absorption spectroscopy
DIN EN 16980-1:2021-12 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials; German version EN 16980-1:2021
DIN EN 16980-1:2020 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials; German and English version prEN 16980-1:2020
DIN EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN 16846-1:2017-05 Photocatalysis - Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode - Part 1: Batch mode test method in closed chamber; German version EN 16846-1:2017
DIN EN 16980-1:2021 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials; German version EN 16980-1:2021
DIN 10182-2:1982 Microbiological analysis of milk; detection of inhibitors in milk; routine method (brilliant black reduction test)
DIN EN ISO 9455-6:2023-03 Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:2022); German version EN ISO 9455-6:2022
DIN EN 17090:2019-01 Fertilizers - Determination of nitrification inhibitor DMPSA in fertilizers - Method using high-performance liquid chromatography (HPLC); German version EN 17090:2018

Professional Standard - Non-ferrous Metal, Detection method of lithium in catalyst

YS/T 834-2012 Determination of loss on ignition in reforming spent platinum catalyst
YS/T 1071-2015 Chemical analysis methods of hydrogen peroxide spent catalysts.Determination of palladium content.Spectrometry
YS/T 835-2012 Determination of platinum,palladium and rhodium in exhaust purfication metallic substrate auto-catalysts .Flame atomic absorption spectrometry
YS/T 832-2012 Determination of rhodium in spent oxo.Alcohols catalyst.Inductively coupled plasma atomic emission spectrometry

Universal Oil Products Company (UOP), Detection method of lithium in catalyst

UOP 274-2013 Platinum in Fresh Catalysts by Spectrophotometry
UOP 917-1993 PALLADIUM IN FRESH AND SPENT ALUMINA CATALYST BY SPECTROPHOTOMETRY
UOP 979-2014 TOTAL CHLORIDE IN ALUMINA SUPPORTED CATALYSTS BY WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE
UOP 291-2013 Total Chloride in Alumina and Silica-Alumina Catalysts by Microwave Digestion and Potentiometric Titration
UOP 291-2015 Total Chloride in Alumina and Silica-Alumina Catalysts by Microwave Digestion and Potentiometric Titration

Professional Standard - Automobile, Detection method of lithium in catalyst

QC/T 968-2014 Determination methods of platinum, palladium and rhodium contents in metallic catalytic converters

Xinjiang Provincial Standard of the People's Republic of China, Detection method of lithium in catalyst

DB65/T 2006.1-2002 Determination of DIRAC POWER in Gasoline
DB65/ 037.1-2000 Detemination of FSA-JDQ1 in Gasoline
DB65/ 037.2-2001 Detemination of Detergent content in gasoline
DB65/T 2009.3-2003 Diesel oil JS-DA Dqteugent
DB65/T 2006.2-2003 Method for Detergent Content Determination in Gasoline Part 2: Determination of HITEC-4975A Gasoline Detergent
DB65/T 2009.2-2003 Measure method of cleanser content in derv second 2:Measure method of Dirac power cleanser
DB65/T 2009.1-2002 Method for Determination of Diesel Detergent Content in Diesel Diesel Oil Part 1 Determination of Tsunami Brand Diesel Detergent

British Standards Institution (BSI), Detection method of lithium in catalyst

BS EN 16980-1:2021 Tracked Changes. Photocatalysis. Continuous flow test methods. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
BS PD CEN/TS 16980-1:2016 Photocatalysis. Continuous flow test methods. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
20/30405589 DC BS EN 16980-1. Photocatalysis. Continuous flow test methods. Part 1. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
BS ISO 17721-2:2021 Quantitative determination of antibacterial activity of ceramic tile surfaces. Test methods. Ceramic tile surfaces with incorporated photocatalytic antibacterial agents
BS 3680-2C:1993 Measurement of liquid flow in open channels. Dilution methods. Methods of measurement using chemical tracers
BS 684-2.33:1983 Methods of analysis of fats and fatty oils. Other methods. Detection and identification of antioxidants
BS EN 16846-1:2017 Photocatalysis. Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode. Batch mode test method in closed chamber
BS EN ISO 9455-6:2022 Tracked Changes. Soft soldering fluxes. Test methods. Determination and detection of halide (excluding fluoride) content
BS ISO 17381:2003 Water quality. Selection and application of ready-to-use test kit methods in water analysis
BS 2782-8 Method 830A:1999 Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals
PD ISO/TS 23362:2021 Nanotechnologies. Nanostructured porous alumina as catalyst support for vehicle exhaust emission control. Specification of characteristics and measurement methods
20/30369440 DC BS ISO 17721-2. Quantitative determination of antibacterial activity of ceramic tile surfaces. Test methods. Part 2. Ceramic tile surfaces with incorporated photocatalytic antibacterial agents
BS PD ISO/TS 23362:2021 Nanotechnologies. Nanostructured porous alumina as catalyst support for vehicle exhaust emission control. Specification of characteristics and measurement methods
BS EN 17181:2019 Lubricants. Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution. Test method based on CO2-production
BS ISO 5765-1:2002 Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the glucose moiety of the lactose
BS ISO 5765-2:2002 Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the galactose moiety of the lactose
BS 684 Sec.2.33:1983 Methods of analysis of fats and fatty oils. Other methods. Detection and identification of antioxidants

ES-UNE, Detection method of lithium in catalyst

UNE-EN 16980-1:2022 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials.
UNE-EN 16846-1:2019 Photocatalysis - Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode - Part 1: Batch mode test method with a closed chamber
UNE-EN 17181:2019 Lubricants - Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution - Test method based on CO2-production
UNE-EN ISO 9455-6:2023 Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:2022)

IN-BIS, Detection method of lithium in catalyst

IS 13631-1993 Method of test for detection and determination of antioxidant additives in insulating oils
IS 6925-1973
IS 9190-1979

Association Francaise de Normalisation, Detection method of lithium in catalyst

NF EN 16980-1:2021 Photocatalyse - Méthode d'essai en flux continu - Partie 1 : détermination de la dégradation du monoxyde d'azote (NO) dans l'air par des matériaux photocatalytiques
NF V04-060*NF EN ISO 14637:2007 Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method)
NF B44-212-1*NF EN 16980-1:2021 Photocatalysis - Continuous flow test methods - Part 1 : determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
NF EN 16846-1:2017 Photocatalyse - Mesure de l'efficacité des dispositifs photocatalytiques servant à l'élimination, en mode actif, des COV et des odeurs dans l'air intérieur - Partie 1 : méthode d'essai en enceinte confinée
NF EN ISO 4629-2:2016 Liants pour peintures et vernis - Détermination de l'indice d'hydroxyle - Partie 2 : méthode utilisant un catalyseur
FD ISO/TR 17276:2014 Cosmétiques - Approche analytique des méthodes de détection et de quantification des métaux lourds dans les cosmétiques
NF ISO 17091:2013 Air des lieux de travail - Détermination de la teneur en hydroxyde de lithium, hydroxyde de sodium, hydroxyde de potassium et dihydroxyde de calcium - Méthode par mesurage des cations correspondants utilisant la chromatographie ionique
NF EN ISO 9455-6:2022 Flux de brasage tendre - Méthodes d'essai - Partie 6 : dosage et détection des halogénures (à l'exception des fluorures)
NF ISO 17721-2:2021 Détermination quantitative de l'activité antibactérienne des surfaces des carreaux céramiques - Méthodes d'essai - Partie 2 : carreaux céramiques incorporant des agents antibactériens photocatalytiques en surface
NF B44-211-1*NF EN 16846-1:2017 Photocatalysis - Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode - Part 1 : batch mode test method in closed chamber
NF P61-613-2*NF ISO 17721-2:2021 Quantitative determination of antibacterial activity of ceramic tile surfaces - Test methods - Part 2 : ceramic tile surfaces with incorporated photocatalytic antibacterial agents

CH-SNV, Detection method of lithium in catalyst

SN EN 16980-1-2021 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials

Danish Standards Foundation, Detection method of lithium in catalyst

DS/EN 16980-1:2021 Photocatalysis – Continuous flow test methods – Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
DS/ISO/TS 23362:2021 Nanotechnologies – Nanostructured porous alumina as catalyst support for vehicle exhaust emission control – Specification of characteristics and measurement methods
DS/ISO 17381:2007 Water quality - Selection and application of ready-to-use test kit methods in water analysis
DS/EN 16343:2013 Cosmetics - Analysis of cosmetic products - Determination of 3-iodo-2-propynyl butylcarbamate (IPBC) in cosmetic preparations, LC-MS methods
DS/EN ISO 9455-6:1997 Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content

IT-UNI, Detection method of lithium in catalyst

UNI EN 16980-1-2021 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
UNI 6625-1969

European Committee for Standardization (CEN), Detection method of lithium in catalyst

EN 16980-1:2021 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
PD CEN/TS 16980-1:2016 Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
EN 16846-1:2017 Photocatalysis - Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode - Part 1: Batch mode test method in closed chamber
EN ISO 9455-6:2022 Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:2022)

Professional Standard - Agriculture, Detection method of lithium in catalyst

GB/T 13882-1992 Determination method of iodine in feedstuffs Ferric thiocyanate-nitrous acid catalytic kinetic method
水产品质量安全检验手册 7.6.2.1-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 6 Determination of Bleach in Aquatic Products 2. Determination of Sulfur Dioxide (1) Rapid Qualitative Method
水产品质量安全检验手册 7.6.2.2-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 6 Determination of Bleach in Aquatic Products 2. Determination of Sulfur Dioxide (2) Iodometric Method
水产品质量安全检验手册 7.4.3.0-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 4 Determination of Antioxidants in Aquatic Products 3. Determination of Phytic Acid--Spectrophotometric Method (GBT 5009.153-2003)
水产品质量安全检验手册 7.6.2.3-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 6 Determination of Bleach in Aquatic Products 2. Determination of Sulfur Dioxide (3) Ion Chromatography
SN/T 5643.5-2023
水产品质量安全检验手册 7.8.2.2-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 8 Determination of Nutritional Enhancers in Aquatic Products 2. Determination of Taurine (GBT 5009.169-2003) (2) TLC
水产品质量安全检验手册 7.8.2.1-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 8 Determination of Nutritional Enhancers in Aquatic Products 2. Determination of Taurine (GBT 5009.169-2003) (1) Liquid Chromatography

Indonesia Standards, Detection method of lithium in catalyst

SNI 19-6036-1999 Test method for hydrogen peroxide (H2O2) in waste water
SNI 03-6791-2002 Test method of cement content in soil-cement mixture by chemistry analysis

VE-FONDONORMA, Detection method of lithium in catalyst

NORVEN 76-55-1966

Professional Standard - Commodity Inspection, Detection method of lithium in catalyst

SN/T 1478-2004 Determination of titanium dioxide in cosmetics - ICP-AES
SN/T 1499-2004 Determination of kojic acid in cosmetics-Liquid chromatography
SN/T 1475-2004 Determination of arbutin in cosmetics liquid chromatography
SN/T 1495-2004 Determination of phthalates in cosmetics-Gas chromatography
SN/T 3228-2012 Determination of organophosphrous flame retardants in import and export textiles
SN/T 1851-2006 Determination of retardant in textiles. GC-MS mothod
SN/T 4317-2015 Determination of 7 photoinitiators migration constents in foodstuffs for export.LC-MS/MS method
SN/T 2290-2009 Determination of acetylsalicylic acid in cosmetics for import and export
SN/T 3613-2013 Test method for determining total volatile organic compounds from furniture
SN/T 1500-2004 Determination of glycyrrhizic acid dipotassium in cosmetics-Liquid chromatography
SN/T 2098-2008 Determination of aerobic bacterial count in foods and cosmetics.Spiral plate method
SN/T 4115-2015 Determination of sulfur compounds in natural gas.Gas chromatography and sulfur chemiluminescence deterctor
SN/T 1498-2004 Determination of magnesium L-ascorbyl-2-phosphate in cosmetics-Liquid chromatography
SN/T 1732.18-2015 Pyrotechnic composition used for fireworks and firecracker.Part 18:Determination of chlorinated paraffin
SN/T 3538-2013 Determination of six kinds of artificial sweeteners in foodstuffs for export.LC-MS/MS method
SN/T 3541-2013 Determination of multiple ether herbicides sesidues in foods for export.GC-MS/NCI method
SN/T 2292-2009 Determination of lead and cadmium in cosmetics grade talc.Graphite furnace atomic absorption spectrometry method

Yunnan Provincial Standard of the People's Republic of China, Detection method of lithium in catalyst

DB53/T 815-2017 Determination of Rhenium Content in Spent Platinum-Rhenium Catalysts by Inductively Coupled Plasma Emission Spectrometry
DB53/T 666-2015 Chemical analysis method for insoluble slag of spent petrochemical catalyst Determination of platinum and palladium content Inductively coupled plasma emission spectrometry
DB53/T 665-2015 Fine chemical industry waste catalyst insoluble slag chemical analysis method Determination of platinum, palladium, rhodium content inductively coupled plasma emission spectrometry
DB53/T 816-2017 Determination of Platinum, Palladium and Rhodium Contents in Plasma Smelted Ferroalloys of Failed Automobile Exhaust Purification Catalysts by Inductively Coupled Plasma Emission Spectrometry

Group Standards of the People's Republic of China, Detection method of lithium in catalyst

T/SDG 002-2020 Test method for detection of dopant (calcium chloride, calcium oxide) in desiccant for insulating glass
T/CASME 415-2023 Method for detection of spore probiotics in puffed pet food
T/CNIA 0020-2019 Determination of Impurity Content in Resin Catalysts for the Disproportionation of Chlorosilanes by Inductively Coupled Plasma-Atomic Emission Spectrometry
T/CBJ 2204-2023 Quantification of cyanide in Baijiu-making raw materials, Jiuqu and fermented grains
T/JMZJXH 005-2020 Determination of Isophorone Content in Solvent Wood Coatings —Gas Chromatography

Liaoning Provincial Standard of the People's Republic of China, Detection method of lithium in catalyst

DB21/T 3061-2018 Detection method of Enterococcus faecalis in microbial preparations for feeding

国家市场监督管理总局、中国国家标准化管理委员会, Detection method of lithium in catalyst

GB/T 40030-2021 Determination of medium chain chlorinated paraffins in electrical and electronic products
GB/T 23524-2019 Method for chemical analysis of petrochemical spent platinum catalyst—Determination of platinum—Inductively coupled plasma atomic emission spectrometry
GB/T 40185-2021 Determination of 5 kinds of ammonium chloride antibacterial agents in toothpaste—High performance liquid chromatography method
GB/T 39934-2021 Determination of volatile organic compounds from furniture products—Gas chromatography-mass spectrometry

Korean Agency for Technology and Standards (KATS), Detection method of lithium in catalyst

KS M 1072-2008 Determination of TBBPA(Tetrabromobisphenol-A) and HBCD(Hexabromocyclododecan) in polymer materials
KS L ISO 17168-5:2020 Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment —Part 5: Remova
KS I 2220-2010 Measuring method for volatile organic compounds in airborne by gas detector tube
KS M 2457-2003 Test method for chlorine content of light and middle distillates by oxidative microcoulometry
KS B ISO 9455-6-2002(2017) Soft soldering fluxes－Test methods－Part 6：Determination and detection of halide(excluding fluoride) content
KS B ISO 9455-6:2022 Soft soldering fluxes — Test methods — Part 6: Determination and detection of halide(excluding fluoride) content

KR-KS, Detection method of lithium in catalyst

KS L ISO 17168-5-2020 Fine ceramics(advanced ceramics, advanced technical ceramics) —Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment —Part 5: Remova
KS B ISO 9455-6-2022 Soft soldering fluxes — Test methods — Part 6: Determination and detection of halide(excluding fluoride) content

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Detection method of lithium in catalyst

ASHRAE 173-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detectors

PT-IPQ, Detection method of lithium in catalyst

NP 3579-1987 Edible fats and oils Detection and identification of antioxidants. Thin-layer chromatographic method

AT-ON, Detection method of lithium in catalyst

ONORM DIN 10182-1-1993 Microbiological analysis of milk - Detection of inhibitory substances in milk - Reference method

AR-IRAM, Detection method of lithium in catalyst

IRAM 25 714-1962

国家质量监督检验检疫总局, Detection method of lithium in catalyst

SN/T 4395-2015 Detection method for phosphine residues in exported foods Gas chromatography

NL-NEN, Detection method of lithium in catalyst

NEN-EN 196-21-1993 Methods of testing cement. Determination of the chloride, carbon dioxide and alkali content of cement

Canadian General Standards Board （CGSB), Detection method of lithium in catalyst

CGSB 2.11-94 11.1-CAN/CGSB-1994 Methods of Sampling and Testing Soaps and Detergents Determination of Chlorides

CN-XF, Detection method of lithium in catalyst

XF/T 3020-2023 Determination method for perfluorooctane sulfonyl compounds (PFOS) in fire extinguishing agents

National Health Commission of the People's Republic of China, Detection method of lithium in catalyst

GB 23200.44-2016 National food safety standards— Determination of carbon disulfide、carbon tetrachloride and ethylene dibromide residues in cereals

International Organization for Standardization (ISO), Detection method of lithium in catalyst

ISO 17721-2:2021 Quantitative determination of antibacterial activity of ceramic tile surfaces - Test methods - Part 2: Ceramic tile surfaces with incorporated photocatalytic antibacterial agents
ISO 9455-6:2022 Soft soldering fluxes — Test methods — Part 6: Determination and detection of halide (excluding fluoride) content
ISO/TS 23362:2021 Nanotechnologies - Nanostructured porous alumina as catalyst support for vehicle exhaust emission control - Specification of characteristics and measurement methods

Japanese Industrial Standards Committee (JISC), Detection method of lithium in catalyst

JIS K 0125:1995 Testing methods for volatile organic compounds in industrial water and waste water
JIS K 0125:2016 Testing methods for volatile organic compounds in industrial water and waste water
JIS K 7351:2018 Sensitive measurement method of peroxide in plastics by detecting ultra-weak photon emission

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Detection method of lithium in catalyst

GJB 5969.11-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 11: Determination of lithium and cadmium by flame atomic absorption spectrometry

未注明发布机构, Detection method of lithium in catalyst

GJB 8793.11-2015 Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants - Part 11: Determination of lithium and cadmium by flame atomic absorption spectrometry

SE-SIS, Detection method of lithium in catalyst

SIS SS IEC 474:1986 Insula t ing oils — Test method for oxidation stability of inhibited mineral insula ting oils

Standard Association of Australia （SAA）, Detection method of lithium in catalyst

AS 1767.2.4:1999 Insulating liquids - Test methods - Detection and determination of specified anti-oxidant additives in insulating oils

AENOR, Detection method of lithium in catalyst

UNE-EN 16343:2013 Cosmetics - Analysis of cosmetic products - Determination of 3-iodo-2-propynyl butylcarbamate (IPBC) in cosmetic preparations, LC-MS methods

GOSTR, Detection method of lithium in catalyst

GOST 34606-2019 Veterinary preparation, feed, feed additive. Method for determination of the content of aromatic components by gas-liquid chromatography with flame ionization detection