ZH
RU
ES

Preparation of boron

Preparation of boron, Total:409 items.

In the international standard classification, Preparation of boron involves: Inorganic chemicals, Ceramics, Equipment for the chemical industry, Glass, Pharmaceutics, Non-ferrous metals, Plastics, Manufacturing processes in the rubber and plastics industries, Raw materials for rubber and plastics, Nuclear energy engineering, Ferroalloys, Electric filters, Pipeline components and pipelines, Coatings and related processes used in aerospace industry, Installations in buildings, Manufacturing forming processes, Road engineering, Environmental protection, Rubber and plastics products, Construction materials, Elements of buildings, Fluid storage devices, Organic chemicals, Medical equipment, Terminology (principles and coordination).

British Standards Institution (BSI), Preparation of boron

BS 5688-10:1979 Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of matter insoluble in alkaline medium and preparation of test solutions
BS EN 1595:1997 Pressure equipment made from borosilicate glass 3.3. General rules for design, manufacture and testing
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 6402-2:1995 Plastics - Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials - Preparation of test specimens and determination of properties
BS ISO 2580-2:1995 Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2580-2:2004 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 19066-2:2020 Plastics. Methyl methacrylate-acrylonitrile-butadienestyrene (MABS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 19062-2:2019 Tracked Changes. Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 19064-2:2020 Plastics. Styrene-acrylonitrile (SAN) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 4894-2:1996 Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 4894-2:1999 Plastics - Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 21301-2:2019 Plastics. Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Preparation of test specimens and determination of properties
19/30389026 DC BS EN ISO 19066-2. Plastics. Methyl methacrylate-acrylonitrile-butadienestyrene (MABS) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
BS EN ISO 4613-2:1996 Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 12418-2:2012 Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates. Preparation of test specimens and determination of properties
BS EN ISO 13000-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Preparation of test specimens and determination of properties
BS EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1622-2:1999 Plastics - Polystrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1622-2:1996 Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 11413:2009 Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
BS ISO 11413:2008 Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
BS EN 198:2008 Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods
BS EN ISO 21309-2:2019 Tracked Changes. Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties
19/30389023 DC BS EN ISO 19064-2. Plastics. Styrene-acrylonitrile (SAN) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
BS EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods
BS EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN 14469-2:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Preparation of test specimens
BS EN ISO 1060-2:1999 Plastics - Homopolymer and copolymer resins of vinyl chloride - Preparation of test samples and determination of properties
BS EN ISO 24022-2:2020 Plastics. Polystyrene (PS) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 21304-2:2021 Plastics. Ultra-high-molecular-weight polyethylene (PE- UHMW) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1163-2:2000 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1163-2:1996 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations. Factory made polyethylene foam (PEF) products. Specification
BS EN 14313:2010 Thermal insulation products for building equipment and industrial installations. Factory made polyethylene foam (PEF) products. Specification
BS EN ISO 2897-2:2004 Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 8257-2:2002 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS ISO 11414:2009 Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
BS EN ISO 13000-2:2021 Tracked Changes. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Preparation of test specimens and determination of properties
BS EN 14309:2009+A1:2013 Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification
BS EN 14309:2015 Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification
BS EN 14309:2010 Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification
BS EN ISO 11542-2:1999 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 17855-2:2016 Tracked Changes. Plastics. Polyethylene (PE) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 24023-2:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 19069-2:2016 Tracked Changes. Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties

Professional Standard - Chemical Industry, Preparation of boron

HG/T 2956.2-2001 Ascharite ores - Methods of sampling and preparing sample

German Institute for Standardization, Preparation of boron

DIN 54387-1:2016 Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 1: General information and sample preparation
DIN 54387-1:2016-10 Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 1: General information and sample preparation
DIN EN 1595:1997-05 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing; German version EN 1595:1997
DIN 65116:1980 Aerospace; boron fibre reinforced mouldings, preparation of test laminates
DIN EN 1595:1997 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN 54800:1979 Testing of plastics; preparation of polyvinyl chloride (PVC) pastes for testing purposes
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 11468:1999 Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997); German version EN ISO 11468:1999
DIN EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003); German version EN ISO 10366-2:2003
DIN EN ISO 19062-2:2019-06 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19062-2:2019); German version EN ISO 19062-2:2019
DIN EN ISO 19066-2:2020-07 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020); German version EN ISO 19066-2:2020
DIN EN ISO 2580-2:2004 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003); German version EN ISO 2580-2:2003
DIN EN ISO 19062-2:2019 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19062-2:2019)
DIN 16782-2:1991 Polytetrafluoroethylene (PTFE) moulding materials; preparation of specimens and determination of properties
DIN EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)
DIN EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999); English version of DIN EN ISO 14663-2:2006-06
DIN EN ISO 19064-2:2020-07 Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19064-2:2020); German version EN ISO 19064-2:2020
DIN EN ISO 21301-2:2019-05 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21301-2:2019); German version EN ISO 21301-2:2019
DIN EN ISO 4613-2:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995 + AMD 1:2004); German version EN ISO 4613-2:1995 + A1:2004
DIN EN ISO 19064-2:2020 Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19064-2:2020)
DIN EN ISO 21309-2:2019-06 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21309-2:2019); German version EN ISO 21309-2:2019
DIN EN ISO 21301-2:2019 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21301-2:2019)
DIN EN ISO 21309-2:2019 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21309-2:2019)
DIN EN 198:2008 Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods; English version of DIN EN 198:2008-11
DIN EN ISO 4612:1999 Plastics - Preparation of PVC pastes for testing purposes - Planetary-mixer method (ISO 4612:1999); German version EN ISO 4612:1999
DIN EN ISO 21309-2:2017 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21309-2:2017); German and English version prEN ISO 21309-2:2017
DIN EN ISO 21301-2:2017 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21301-2:2017); German and English version prEN ISO 21301-2:2017
DIN 16783-2:1991 Ultra-high molecular weight polyethylene (PE-UHMW) moulding materials; preparation of test specimens and determination of properties
DIN EN ISO 13000-2:2021-11 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021); German version EN ISO 13000-2:2021
DIN EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007); English version of DIN EN ISO 1873-2:2007-11
DIN EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)English version of DIN EN ISO 1872-2:2007-05
DIN EN ISO 1622-2:1999 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995); German version EN ISO 1622-2:1999
DIN EN 14313:2016 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
DIN EN ISO 19069-2:2020-01 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016); German version EN ISO 19069-2:2016 / Note: To be replaced by DIN EN ISO 19069-2 (2023-02).
DIN EN 14313:2016-03 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification; German version EN 14313:2015 / Note: To be amended by DIN EN 14313/A1 (2018-12).
DIN EN ISO 17855-2:2020-01 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016); German version EN ISO 17855-2:2016

Group Standards of the People's Republic of China, Preparation of boron

T/CSBM 0035-2023 Melt derived borosilicate bioactive glass raw materials
T/CSBM 0034-2023 Sol-gel derived borosilicate bioactive glasses raw materials
T/NSSQ 008-2022 Specification for preparation of graphene surface acoustic wave filter structure
T/CPMIA 0201-2022 Co-rotating parallel twin-screw extruder for meltblown polypropylene
T/CGIA 004.1-2022 Guidelines for green production of graphene materials and greenhouse gas emission accounting -- Part 1：Graphene films
T/CGIA 004.2-2022 Guidelines for green production of graphene materials and greenhouse gas emission accounting—Part 2：Graphene oxide
T/CGIA 004.3-2022 Guidelines for green production of graphene materials and greenhouse gas emission accounting—Part 3：liquid exfoliation method
T/CGIA 004.4-2022 Guidelines for green preparation of graphene materials and greenhouse gas emission accounting Part 4：preparation of graphene by arc discharge method

ES-AENOR, Preparation of boron

UNE 53-462-1990
UNE 53-188 Pt.2-1991 Plastics. Polythylene(PE) and ethylene copoliner thermoplastics. Part 2: Preparation of test specimens and determination of properties

European Committee for Standardization (CEN), Preparation of boron

EN 1595:1997 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
EN ISO 10366-2:1999 Plastics - Methyl Methacrylate/Acrylonitrile/Butadiene/Styrene (MABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 10366-2:1994
EN ISO 10366-2:2003 Plastics Methyl methacrylate - acrylonitrile - butadiene- styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties ISO 10366-2:2003
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)
EN ISO 11468:1999 Plastics - Preparation of PVC Pastes for Test Purposes - Dissolver Method
EN ISO 2580-2:1999 Plastics - Acrylonitrile/Butadiene/Styrene (ABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 2580-2: 1994
EN ISO 19064-2:2020 Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19064-2:2020)
EN ISO 2580-2:2003 Plastics - Acrylonitrile-Butadiene-Styrene (ABS) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 2580-2: 2003
EN 14307:2009 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification (Incorporates Amendment A1: 2013)
EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 4894-2:1999 Plastics - Styrene/Acrylonitrile (SAN) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 4894-2:1995
EN ISO 13000-2:1997 Plastics - Polytetrafluoroethylene (PTFE) Semi-Finished Products - Part 2: Preparation of Specimens and Determination of Properties ISO 13000-2:1997
EN ISO 13000-2:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 1873-2:2007 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties
EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
EN ISO 4612:1999 Plastics - Preparation of PVC Pastes for Test Purposes - Planetary-Mixer Method ISO 4612:1999
EN ISO 4613-2:1995 Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties Includes amendment A1:2004
EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
prEN ISO 17855-2 rev Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 24022-2:2020 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24022-2:2020)
EN ISO 24022-1:2020 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24022-1:2020)

Danish Standards Foundation, Preparation of boron

DS/EN 1595:1998 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN ISO 2580-2:2004 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 4894-2:1999 Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 14663-2:2006 Plastics – Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 4613-2/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 4613-2:1996 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/ISO 13000-2:2021 Plastics – Polytetrafluoroethylene (PTFE) semi-finished products – Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 13000-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/ISO 11413:2009 Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
DS/EN ISO 13000-2:2021 Plastics – Polytetrafluoroethylene (PTFE) semi-finished products – Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
DS/EN 14313+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
DS/EN ISO 1622-2:1999 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/ISO 24024-2:2021 Plastics – Homopolymer and copolymer resins of vinyl chloride – Part 2: Preparation of test samples and determination of properties

Lithuanian Standards Office , Preparation of boron

LST EN 1595-2003 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 2580-2:2004 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)
LST EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
LST EN ISO 4894-2:2001 Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995)
LST EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
LST EN ISO 4613-2:2001 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995)
LST EN ISO 4613-2:2001/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 4613-2:1995/Amd 1:2004)
LST EN 14313-2010 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
LST EN ISO 13000-2:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)

Association Francaise de Normalisation, Preparation of boron

NF B34-005*NF EN 1595:1997 Pressure equipment made from borosilicate glass 3.3. General rules for design, manufacture and testing.
NF EN 1595:1997 Équipements sous pression réalisés en verre borosilicate 3.3 - Règles générales pour calculs, fabrication et essais
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF T53-038-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T51-770:1979 PLASTICS. PVC RESINS FOR PASTES. PREPARATION OF A PASTE.
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T54-048:1977 Plastics. Low density polyethylene pipes. Preparation of specimens for physical testing.
NF T53-030-2:1999 Plastics. Polystyrene (PS) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
NF D11-140:2010 Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods.
NF T53-033-2*NF EN ISO 19062-2:2019 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF T50-007-2:1995 Plastics - Polybutene (PB) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-002-2:1997 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-006-2:1997 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T53-038-2*NF EN ISO 19066-2:2020 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF T53-036-2:1999 Plastics. Styrene/acrylonitrile (SAN) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
NF D11-141*NF EN 15720:2010 Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
NF T53-033-2:2004 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF EN ISO 19062-2:2019 Plastiques - Matériaux à base d'acrylonitrile-butadiène-styrène (ABS) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF EN ISO 19066-2:2020 Plastiques - Matériaux à base de méthacrylate de méthyle-acrylonitrile-butadiène-styrène (MABS) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF T50-008-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-004-2:1995 Plastics. Ethylene/vinyl acetate (E/vac) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
NF T53-036-2*NF EN ISO 19064-2:2020 Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF T50-008-2*NF EN ISO 21309-2:2019 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF T50-004-2/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF EN ISO 19064-2:2020 Plastiques - Matériaux à base de styrène-acrylonitrile (SAN) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF T50-007-2:2010 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T51-550-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2 : preparation of test specimens and determination of properties.
NF T53-002-2:1999 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
NF D11-120*NF EN 198:2008 Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods
NF T53-005-2:1999 Plastics. Homopolymer and copolymer resins of vinyl chloride. Part 2 : preparation of test samples and determination of properties.
NF T53-005-2:2021 Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2 : preparation of test samples and determination of properties
NF T50-006-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-006-2*NF EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF T51-550-2*NF EN ISO 13000-2:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2 : preparation of test specimens and determination of properties
NF EN 14309:2016 Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en polystyrène expansé (PSE) - Spécification
NF T53-003-2:2009 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF EN ISO 21301-2:2019 Plastiques - Matériaux à base de copolymère éthylène/acétate de vinyle (EVAC) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF P75-439:2013 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
NF P75-439/IN1:2013 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
NF EN ISO 13000-2:2021 Plastiques - Semi-produits en polytétrafluoroéthylène (PTFE) - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF EN ISO 21309-2:2019 Plastiques - Matériaux à base de copolymères éthylène/alcool vinylique (EVOH) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF P75-438:2013 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
NF T50-002-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF T50-002-2*NF EN ISO 19069-2:2017 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
NF EN 14307:2016 Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en mousse de polystyrène extrudé (XPS) - Spécification
NF EN ISO 17855-2:2016 Plastiques - Polyéthylène (PE) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF P75-438/IN1:2013 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
NF P75-439*NF EN 14313:2016 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
NF T53-030-2*NF EN ISO 24022-2:2020 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Preparation of boron

GB/T 22661.1-2008 Chemical analysis methods of potassium fluoborate.Part1:Preparation and storage of test samples
GB/T 12004.2-1996 PVC paste resins--Preparation of a paste
GB/T 16613-1996 Preparation of polyvinyl chloride (PVC) pastes for test purposes--Vissolver method
GB/T 20417.2-2006 Plastics.Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials.Part 2: Preparation of test specimens and determination of properties
GB/T 16613-2008 Plastics.Preparation of PVC pastes for test purposes.Dissolver method
GB/T 21460.2-2008 Plastics.Styrene/acrylonitrile(SAN)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties
GB/T 21991-2008 Plastics.Preparation of PVC paste for test purpose.Planetary-mixer method
GB/T 30924.2-2014 Plastics.Ethylene-vinyl acetate(EVAC) moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties
GB/T 41877.2-2022 Plastics—Ethylene-vinyl alcohol (EVOH) copolymer moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties
GB/T 19807-2005 Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting
GB/T 3402.2-2010 Plastics.Homopolymer and copolymer resins of vinyl chloride.Part 2:Preparation of test samples and determination of properties
GB/T 2546.2-2022 Plastics—Polypropylene(PP) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 1845.2-2006 Plastics.Polyethylene (PE) moulding and extrusion materials.Part 2: Preparaation of test specimens and determination of properties
GB/T 2546.2-2003 Plastics-Polypropylene (pp) moulding and extrusion materials-Part2:Preparation of test specimens and determination of properties
GB/T 6594.2-2003 Plastics--Polystyrene (PS) moulding and extrusion materials--Part2:Preparation of test specimens and determination of properties
GB/T 12001.2-2008 Plastics.Unplasticized poly(vinyl chloride)(PVC-U)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties
GB/T 19809-2005 Plastics pipes and fittings.Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion

ES-UNE, Preparation of boron

UNE-EN 1595:1997 Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing
UNE-EN ISO 19066-2:2021 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)
UNE-EN ISO 19062-2:2020 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19062-2:2019)
UNE-EN ISO 19064-2:2021 Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19064-2:2020)
UNE-EN ISO 21301-2:2020 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21301-2:2019)
UNE-EN ISO 21309-2:2020 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21309-2:2019)
UNE-EN ISO 13000-2:2022 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
UNE-EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
UNE-EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)

International Organization for Standardization (ISO), Preparation of boron

ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO 4612:1979 Plastics; PVC paste resins; Preparation of a paste
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 10366-2:2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 19062-2:2019 Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 10366-2:1994 Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 19066-2:2020 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 2580-2:2003 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 19064-2:2020 Plastics — Styrene-acrylonitrile (SAN) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 21301-2:2019 Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 2580-2:1994 Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1873-2:1989 Plastics; polypropylene (PP) and propylene-copolymer thermoplastics; part 2: preparation of test specimens and determination of properties
ISO 4894-2:1995 Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 4612:1999 Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method
ISO 14663-2:1999 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1872-2:1989 Plastics; polyethylene (PE) and ethylene copolymer thermoplastics; part 2: preparation of test specimens and determination of properties
ISO 4613-2:1995 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 4613-2:1989 Plastics; Ethylene/vinyl acetate copolymer (E/VAC) thermoplastics; part 2: preparation of test specimens and determination of properties
ISO 21309-2:2019 Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 8986-2:1995 Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 8257-2:1990 Plastics; poly(methyl methacrylate) (PMMA) moulding and extrusion materials; part 2: preparation of test specimens and determination of properties
ISO 6402-2:1994 Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties
ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 11413:2008 Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
ISO 11413:1996 Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
ISO 11413:2019 Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
ISO 4613-2:1995/Amd 1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment 1
ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 13000-2:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties
ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 1873-2:1997 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 13000-2:2021 Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties
ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 11414:2009 Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
ISO 8916:1988 Ethylene for industrial use; determination of traces of polar compounds; preparation of condensate samples by low-temperature scrubbing technique
ISO 1873-2:1997/Amd 1:2000 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment 1
ISO 1872-2:1997/Amd 1:2000 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment 1
ISO 1622-2:1995 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 24022-1:2020 Plastics — Polystyrene (PS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 24022-2:2020 Plastics — Polystyrene (PS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO/DIS 17855-2:1980 Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO/DIS 19069-2:1980 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

YU-JUS, Preparation of boron

JUS G.S2.516-1983 Plastics. PVC paste resins. Preparation of a paste

SAE - SAE International, Preparation of boron

SAE AMS2491F-2015 Surface Treatment of Polytetrafluoroethylene Preparation for Bonding

Society of Automotive Engineers (SAE), Preparation of boron

SAE AMS2491D-2003 Surface Treatment of Polytetrafluoroethylene Preparation for Bonding
SAE AMS2491C-1981 SURFACE TREATMENT OF POLYTETRAFLUOROETHYLENE Bonding Preparation
SAE AMS2491B-1974 SURFACE TREATMENT OF POLYTETRAFLUOROETHYLENE Bonding Preparation
SAE AMS2491A-1967 SURFACE TREATMENT OF POLYTETRAFLUOROETHYLENE Bonding Preparation
SAE AMS2491-1961 SURFACE TREATMENT OF POLYTETRAFLUOROETHYLENE Bonding Preparation
SAE AMS2491D-1989 Surface Treatment of Polytetrafluoroethylene, Preparation for Bonding

Liaoning Provincial Standard of the People's Republic of China, Preparation of boron

DB21/T 2080-2013 Preparation of polyethylene molded test pieces and test specimens

RU-GOST R, Preparation of boron

GOST R 54557-2011 Isobutene-isoprene rubber (IIR). Preparation and testing of rubber compounds
GOST 25207-1985 Ferrotungsten, silicocalcium and ferroboron. Methods for sampling and sample preparation for chemical and physico-chemical analyses
GOST R 54548-2011 Isoprene rubber (IR). Preparation and testing of rubber compounds
GOST R ISO 11413-2014 Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene pipe and an electrofusion fitting
GOST R ISO 11414-2014 Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

TR-TSE, Preparation of boron

TS 2080-1975 CRUDE SODIUM BORATES FOR INDUSTRIAL USE ETERMINATION OF MATTER INSOLUBLE ?N ALKAL?NE MEDIUM AND PREPARATION OF TEST SOLUTIONS

国家能源局, Preparation of boron

NB/T 20536-2018 Boron-containing metal-based neutron absorbing materials used for nuclear criticality control of spent fuel storage and transportation equipment

PL-PKN, Preparation of boron

PN C89286-04-1989 Polyethylene Iow densffy Sampling and sample preparation for testing
PN C04258-08-1986 Rubber test mixes Acrylonitrile-butadiene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-10-1987 Rubber test mixes Halogenated isobutene-isoprene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-06-1986 Rubber test mixes Butadiene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-07-1985 Rubber test mixes Chloroprene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-09-1988 Rubber test mixes Ethylene-propylene diene rubbers Test formu?a, preparation, vulcanisation and testing of properties
PN C04258-04-1987 Rubber test mixes styrene-butadiene and a-methylstyrene-butadiene rubbers Test recipe, preparation vulcanisation and testing of properties

Japanese Industrial Standards Committee (JISC), Preparation of boron

JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6924-2:1997 Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6934-2:2007 Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6938-2:2007 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6938-2:1999 Plastics -- Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6876-2:1999 Plastics -- Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6921-2:1997 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6922-2:1997 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6925-2:1997 Plastics -- Polybutene (PB) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6934-2:1999 Plastics -- Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6923-2:1997 Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7383:2002 Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method
JIS K 6927-2:1997 Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6927-2:1996 Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6924-2:1996 Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7384:2002 Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method
JIS K 6926-2:1997 Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6922-2:2005 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6921-2:2005 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6922-2:2010 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6921-2:2010 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6922-2:2018 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7137-2:2001 Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 2: Preparation of test specimens and determination of properties
JIS K 6936-2:1999 Plastics -- Ultra-high-molecular weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6720-2:1999 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties
JIS K 6921-2:1996 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6922-2:1996 Plastics -- Polyethylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6925-2:1996 Plastics -- Polybutene (PB) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6923-2:1996 Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

AENOR, Preparation of boron

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-EN ISO 2580-2:2004 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)
UNE-EN ISO 10366-2:2004 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
UNE-EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
UNE-EN ISO 4613-2:1996 PLASTICS. ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIals. Part 2: Preparation of test specimens and determination of properties. (ISO 4613-2:1995).
UNE-EN ISO 4894-2:2000 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 4894-2:1995)
UNE-EN ISO 4613-2/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 4613-2:1995/Amd 1:2004)
UNE-EN ISO 13000-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
UNE-EN 14313:2017 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification

American Society for Testing and Materials (ASTM), Preparation of boron

ASTM F3525/F3525M-21 Standard Specification Fabricated Fittings of Crosslinkable Polyethylene (CX-PE)
ASTM D3010-87 Practice for Preparing Compression-Molded Test Sample Plaques of Rigid Poly(Vinyl Chloride) Compounds
ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM F2307-03 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter

Korean Agency for Technology and Standards (KATS), Preparation of boron

KS M ISO 4613-2:2011 Plastics-Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 4613-2:2016 Plastics－Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 2580-2-2016(2021) Plastics－Acrylonitirle/butadiene/styrene(ABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 10366-2:2006 Plastics-Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 10366-2-2016(2021) Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 10366-2:2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 4894-2-2016(2021) Plastics－Styrene/Acrylonitirile(SAN) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 2580-2:2011 Plastics-Acrylonitirle/butadiene/styrene(ABS) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 2580-2:2016 Plastics－Acrylonitirle/butadiene/styrene(ABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 1873-2:2011 Plastics-Polypropylene(PP) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1872-2:2011 Plastics-Polyethylene(PE) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1872-2:2016 Plastics－Polyethylene(PE) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 1873-2:2016 Plastics－Polypropylene(PP) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 14663-2-2002(2022) Plastics－Ethylene/vinyl alcohol(EVOH) copolymer moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 14663-2-2002(2017) Plastics－Ethylene/vinyl alcohol(EVOH) copolymer moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 4613-2-2016(2021) Plastics－Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 8986-2:2013 PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 8986-2:2008 Plastics-Polybutylene(PB) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 14663-2:2002 Plastics-Ethylene/vinyl alcohol(EVOH) copolymer moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 8257-2:2002 Plastics－Poly(methyl methacrylate) (PMMA) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 4894-2:2011 Plastics-Styrene/Acrylonitirile(SAN) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 4894-2:2016 Plastics－Styrene/Acrylonitirile(SAN) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 2897-2:2011 Plastics-Impact-resistant polystyrene(PS-I)moulding and extrusion materials-Part 2:Preparation of test specimens and determiniation of properties
KS M ISO 13000-2-2013(2018) Plastics ㅡ Polytetrafluoroethylene (PTFE) semi-finished products ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 2897-2:2016 Plastics－Impact-resistant polystyrene(PS-I)moulding and extrusion materials－Part 2：Preparation of test specimens and determiniation of properties
KS M ISO 8986-2-2013(2018) PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 13000-2:2013 Plastics ㅡ Polytetrafluoroethylene (PTFE) semi-finished products ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 13000-2:2011 Plastics-Polytetrafluoroethylene(PTFE) semi-finished products-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1622-2-2008(2018) Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 17855-2-2017(2022) Plastics ㅡ Polyethylene (PE) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 19069-2-2017(2022) Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 1060-2-2002(2017) Plastics－Homopolymer and copolymer resins of vinyl chloride－Part 2：Preparation of test samples and determination of properties
KS M ISO 1060-2-2002(2022) Plastics－Homopolymer and copolymer resins of vinyl chloride－Part 2：Preparation of test samples and determination of properties
KS M ISO 19069-2:2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties

CEN - European Committee for Standardization, Preparation of boron

EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 19062-2:2019 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 21301-2:2019 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 21309-2:2019 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN 14307:2015 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
EN ISO 4612:2018 Plastics - Preparation of PVC Pastes for Test Purposes - Planetary-Mixer Method
EN ISO 1873-2:1997 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (Incorporates Amendment A1: 2000)
EN ISO 1872-2:1997 Plastics - Polyethylene (PE) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (Incorporates Amendment A1: 2000)
EN ISO 8986-2:1995 Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (Incorporates Amendment A1: 2000)
EN 14307:2015/PRA1:2018 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification

KR-KS, Preparation of boron

KS M ISO 2580-2-2016 Plastics－Acrylonitirle/butadiene/styrene(ABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 10366-2-2016 Plastics－Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 4894-2-2016 Plastics－Styrene/Acrylonitirile(SAN) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 4613-2-2016 Plastics－Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 1872-2-2011 Plastics－Polyethylene(PE) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 1873-2-2011 Plastics－Polypropylene(PP) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 19069-2-2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 17855-2-2017 Plastics ㅡ Polyethylene (PE) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties

未注明发布机构, Preparation of boron

BS EN ISO 2580-2:2003(2004) Plastics - Acrylonitrile - butadiene - styrene (ABS) moulding and extrusion materials - Part 2 : Preparation of test specimens and determination of properties
BS EN ISO 10366-2:2003(2004) Plastics — Methyl methacrylate - acrylonitrile - butadiene - styrene (MABS) moulding and extrusion materials — Part 2 : Preparation of test specimens and determination of properties
BS EN ISO 4613-2:1995(2004) Plastics — Ethylene / vinyl acetate (E / VAC) moulding and extrusion materials — Part 2 : Preparation oftest specimens and determination ofproperties
BS 6231:2006(2012) Electric cables – Single core PVC insulated flexible cables of rated voltage 600 / 1000 V for switchgear and controlgear wiring
ISO 8257-2:2001/Cor 1:2003 Plastics-Poly(methy1methacrylate) (PMMA) moulding and extrusion materials- Part 2: Preparationof test specimens and determination of properties

Gansu Provincial Standard of the People's Republic of China, Preparation of boron

DB62/T 4619-2022 Technical specification for preparation of graphene composite rubber modified asphalt for road use

IT-UNI, Preparation of boron

UNI 7702-1977
UNI 7535-1976
UNI EN ISO 13000-2:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties
UNI 7537-1976
UNI 7598-1976

国家市场监督管理总局、中国国家标准化管理委员会, Preparation of boron

GB/T 39714.2-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties
GB/T 37199.2-2018 Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties
GB/T 1845.2-2021 Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
GB/T 39690.2-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties

SE-SIS, Preparation of boron

SIS SS 424 03 23-1987 Control cables with rated voltage 150/250 V, type FKAR - PVC-lnsulated, PVC-sheathed control cables for electronic equipment - Design and testing

National Electrical Manufacturers Association（NEMA), Preparation of boron

NEMA HP 100.3-1991 High Temperature Instrumentation and Control Cables Insulated and Jacketed with Cross-Linked (Thermoset) Polyolefin (XLPO)

Association of German Mechanical Engineers, Preparation of boron

DVS 2205-1 Beiblatt 2-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
DVS 2205-1 Beiblatt 2-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polypropylene material group
DVS 2205-1 Beiblatt 6-2008
DVS 2205-1 Beiblatt 3-2013 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
DVS 2205-1 Beiblatt 3-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyvinyl chloride material group
DVS 2205-1 Beiblatt 1-2011 Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyethylene material group

ZA-SANS, Preparation of boron

SANS 161-2:1997 Plastics - Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties

CZ-CSN, Preparation of boron

CSN 65 9710-1989 Organic pigments. Testing methods of pigment preparations on the basis of vinyl polymers and nitrocellulose

CH-SNV, Preparation of boron

SN EN ISO 13000-2:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)