ZH
RU
ES

XPS correction method

XPS correction method, Total:499 items.

In the international standard classification, XPS correction method involves: Audio, video and audiovisual engineering, Radiation measurements, Analytical chemistry, Measurement of force, weight and pressure, Measurement of volume, mass, density, viscosity, Vibrations, shock and vibration measurements, Geology. Meteorology. Hydrology, Optics and optical measurements, Road vehicles in general, Metrology and measurement in general, Ventilators. Fans. Air-conditioners, Small craft, Shipbuilding and marine structures in general, Internal combustion engines, Internal combustion engines for road vehicles, Thermodynamics and temperature measurements, Plastics, Capacitors, Acoustics and acoustic measurements, Construction materials, Road engineering, Food products in general, Petroleum products in general, Insulation, Electromagnetic compatibility (EMC), Paint ingredients, On-board equipment and instruments, Road vehicle systems, Equipment for petroleum and natural gas industries, Electricity. Magnetism. Electrical and magnetic measurements, Solar energy engineering, Metalliferous minerals, Linear and angular measurements, Testing of metals, Optoelectronics. Laser equipment, Water quality, Mechanical testing, Telecontrol. Telemetering, Corrosion of metals, Hydraulic energy engineering, Vacuum technology, Fluid power systems, Environmental protection, Non-destructive testing, Resistors, Fibre optic communications, Vibration and shock with respect to human beings, Products of the chemical industry, Installations in buildings, Valves, Protection against excessive pressure, Crude petroleum, Protection against fire, Protection of and in buildings, Kitchen equipment, Construction equipment, Extraction and processing of petroleum and natural gas, Electric filters, Milk and milk products, Photography, Cinematography, Radiation protection, Equipment for processing of minerals, Cereals, pulses and derived products, Motor cycles and mopeds, Sensory analysis.

IN-BIS, XPS correction method

American National Standards Institute （ANSI), XPS correction method

ANSI S1.10-1966 Method for Calibration of Microphones
ANSI/ASA S2.2-1959 Methods for the Calibration of Shock and Vibration Pickups
ANSI S2.2-1959 Methods for the Calibration of Shock and Vibration Pickups
ANSI/ASTM B810:2001 Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ANSI/ASA S3.7-1995 Method for Coupler Calibration of Earphones
ANSI S3.7-1995 Method for Coupler Calibration of Earphones

Taiwan Provincial Standard of the People's Republic of China, XPS correction method

CNS 10570-1983 Methods of Calibration for Radiation Exposure Meters
CNS 14939-2005 Standard practice for determining asphalt volume correction to a base temperature
CNS 13234-1993 Gas Analysis - Preparation of Calibration Gas Mixtures (Permeation Method)
CNS 2732-1983 Calibration Method for Speedometers of Automobiles

Professional Standard - Aerospace, XPS correction method

QJ 3088-1999 Positive Pressure Standard Leak Calibration Method
QJ 2040.2-1991修改单 Calibration methods for standard leaks versus calibration methods
QJ 2040.2-1991 Calibration methods for standard leaks versus calibration methods
QJ 2040.1-1991 Calibration method for standard leak Absolute calibration method
QJ 2040.1-1991修改单 Calibration method for standard leak Absolute calibration method
QJ 3089-1999 Helium Mass Spectrometry Positive Pressure Leak Detection Method
QJ 2805-1996 Angle and distance calibration method for ground radar

Korean Agency for Technology and Standards (KATS), XPS correction method

KS I 2219-2009 General rules for calibration method of gas analyzer
KS Q 4003-2005 Measurement-General rules for calibration system
KS R 1023-2006 Mopeds and motorcycles-Speedometers-Methods of calibration
KS B 0713-3-2001(2011) Methods for the calibration of vibration and shock pick-ups－Part 3 : Secondary vibration calibration
KS B ISO 16063-12:2013 Methods for the calibration of vibration and shock transducers－Part 12：Primary vibration calibration by the reciprocity method
KS B 0713-1-2001(2011) Methods for the calibration of vibration and shock pick-ups－Part 1：Primary vibration calibration by laser interferometry
KS B 0713-9-2001(2011) Methods for the calibration of vibration and shock pick-ups-Part 9 : Secondary vibration calibration by comparison of phase angles
KS B ISO 5347-20_2001-2001(2011) Methods for the calibration of vibration and shock pick-ups－Part 20：Primary vibration calibration by the reciprocity method
KS B 0713-6-2001(2011) Methods for the calibration of vibration and shock pick-ups-Part 6 : Primary vibration calibration at low frequencies
KS C IEC 62585:2017 Electroacoustics ― Methods to determine corrections to obtain the free-field response of a sound level meter
KS B ISO 5347-20_2001:2012 Methods for the calibration of vibration and shock pick-ups－Part 20：Primary vibration calibration by the reciprocity method
KS C IEC 60891:2012 Photovoltaic devices－Procedures for temperature and irradiance corrections to measured I-V characteristics
KS I ISO 6145-1:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
KS I ISO 6145-1:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS D ISO 19318:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
KS C IEC 62008:2013 Performance characteristics and calibration methods for digital data acquisition systems and relevant software
KS A 0506-2-2013 Methods of calibration for ionization gauge
KS A 0506-4-2013 Methods of calibration for capacitance gauge
KS A 0506-3-2013 Methods of calibration for viscosity gauge
KS A 0506-2-2002(2012) Methods of calibration for ionization gauge
KS A 0506-4-2002(2012) Methods of calibration for capacitance gauge
KS D ISO 19318-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
KS A 0506-3-2002 Methods of calibration for viscosity gauge
KS A 0506-1-2013 Methods of calibration for thermal conductivity gauge
KS A 0506-2006(2011) Methods of calibration for vacuum gauges
KS A 0506-1-2002 Methods of calibration for thermal conductivity gauge
KS A 0506-2-2002 Methods of calibration for ionization gauge
KS A 0506-4-2002 Methods of calibration for capacitance gauge
KS A 0506-3-2002(2012) Methods of calibration for viscosity gauge
KS A 0506-1-2002(2012) Methods of calibration for thermal conductivity gauge
KS I 2219-2015 General rules for calibration method of gas analyzer
KS B ISO 16063-21:2013 Methods for the calibration of vibration and shock transducers-Part 21:Vibration calibration by comparison to a reference transducer
KS B ISO 16063-22:2008 Methods for the calibration of vibration and shock transducers-Part 22:Shock calibration by comparison to a reference transducer
KS I ISO 8466-2:2007 Water quality-Calibration and evaluation of analytical methods and estimation of performance characteristics-Part 2:Calibration strategy for non-linear second-order calibration functions
KS B ISO 16063-12:2018 Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method
KS B ISO 5347-7:2014 Methods for the calibration of vibration and shock pick-ups — Part 7: Primary calibration by centrifuge
KS R 1023-2006(2011) Mopeds and motorcycles－Speedometers－Methods of calibration
KS R 1023-1986 Mopeds and motorcycles－Speedometers－Methods of calibration
KS B 0713-4-2001(2011) Methods for the calibration of vibration and shock pick-ups-Part 4 : Secondary shock calibration

British Standards Institution (BSI), XPS correction method

BS 7882:1997 Method for calibration and classification of torque measuring devices
BS 7882:2008 Method for calibration and classification of torque measuring devices
BS 2000-0.4:1996 Methods of test for petroleum and its products - General introduction - Barometric pressure corrections
BS 4559-4:2000 Methods for preparation of calibration gas mixtures - Certificate of mixture preparation
BS ISO 18314-2:2015 Analytical colorimetry. Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding powe
BS 6955-19:1994 Calibration of vibration and shock pick-ups - Method of test for magnetic field sensitivity
BS 2000-0-4:1996 Methods of test for petroleum and its products. General introduction. Barometric pressure corrections
BS EN 62585:2012 Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter
BS ISO 27306:2010 Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
BS EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
BS ISO 27306:2009 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
BS ISO 19318:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
BS EN 62343-5-1:2015 Dynamic modules. Test methods. Dynamic gain tilt equalizer. Gain tilt settling time measurement
23/30433783 DC BS EN ISO 26101-2. Acoustics. Test methods for the qualification of the acoustic environment - Part 2. Determination of the environmental correction
BS EN 1015-9:1999 Methods of test for mortar for masonry - Determination of workable life and correction time of fresh mortar
BS 7976-3:2002 Pendulum testers - Method of calibration
BS 7976-3:2002+A1:2013 Pendulum testers. Method of calibration
PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement. Correction for temperature when testing with the CPX method
BS ISO 16063-44:2018 Methods for the calibration of vibration and shock transducers - Calibration of field vibration calibrators
BS EN ISO 6145-1:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
BS EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibration
BS ISO 16063-17:2016 Methods for the calibration of vibration and shock transducers. Primary calibration by centrifuge
BS ISO 8466-1:2021 Water quality. Calibration and evaluation of analytical methods - Linear calibration function
BS ISO 16531:2013 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS ISO 16063-12:2002 Methods for the calibration of vibration and shock transducers - Primary vibration calibration by the reciprocity method
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
BS EN ISO 18314-2:2023 Tracked Changes. Analytical colorimetry. Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power
BS 6955-1:1994 Calibration of vibration and shock pick-ups. Methods for primary vibration calibration by laser interferometry
BS 6955-7:1994 Calibration of vibration and shock pick-ups. Methods for primary calibration by centrifuge
BS ISO 16063-13:2001 Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry
BS 7935-2:2004 Constant amplitude force calibration - Calibration of the calibration device instrumentation to be used for the dynamic calibration of non-resonant uniaxial dynamic testing systems - Method
BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
BS 6809:1987 Method for calibration of radiometers for use in fire testing
BS 6888:1988 Methods for calibration of bonded electrical resistance strain gauges
BS ISO 16531:2020 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS ISO 16063-16:2014 Methods for the calibration of vibration and shock transducers. Calibration by Earth’s gravitation
BS ISO 16063-41:2011 Methods for the calibration of vibration and shock transducers. Calibration of laser vibrometers
BS 6955-8:1994 Calibration of vibration and shock pick-ups. Method for primary calibration by dual centrifuge

Japanese Industrial Standards Committee (JISC), XPS correction method

JIS K 0971:1989 Calibration methods for micro-volumetric apparatus
JIS Z 4326:1983 Method of calibration for continuous environmental gamma-ray monitors
JIS Z 4511:1991 Methods of calibration for exposure meters and dose-equivalent meters
JIS Z 4511 AMD 1:2001 Methods of calibration for exposure meters and dose-equivalent meters (Amendment 1)
JIS Z 8750:2009 Methods of calibration for vacuum gauges
JIS Z 8750:1994 Methods of calibration for vacuum gauges
JIS B 9935:2001 Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation
JIS K 0158:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
JIS B 7602:2009 Calibration and test method for force-proving instruments
JIS C 6188:2021 Calibration method of measuring optical attenuators

Association Francaise de Normalisation, XPS correction method

NF X20-212:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 1 : methods of calibration.
NF J38-112:1975 Yachting. Installation of magnetic compasses. Gauging methods. Adjustement.
NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
NF M07-019/A1*NF EN ISO 2719/A1:2021 Determination of flash point - Pensky-Martens closed cup method - Amendment 1 : thermometers correction
NF EN 62585:2013 Électroacoustique - Méthode de détermination de corrections pour obtenir la réponse en champ libre d'un sonomètre
NF ISO 11843-5/A1:2017 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire - Amendement 1
NF R13-623:1990 Road vehicles. Levelling devices for headlamp dipped beam.
NF C97-166*NF EN 61041-4:1997 Non-broadcast video tape recorders. Methods of measurement. Part 4 : calibration tape (NTSC/PAL/SECAM).
NF X21-068*NF ISO 29081:2010 Surface chemical analysis - Auger electron spectroscopy - Reporting of methods used for charge control and charge correction
NF T33-313-2*NF EN ISO 18314-2:2018 Analytical colorimetry - Part 2 : saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power
NF X20-205-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1 : methods of calibration.
NF S31-585*NF EN 62585:2013 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
NF P98-818-38*NF EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38 : common equipment and calibration
NF X06-048-5/A1*NF ISO 11843-5/A1:2017 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1
NF ISO 29081:2010 Analyse chimique des surfaces - Spectroscopie d'électrons Auger - Indication des méthodes mises en oeuvre pour le contrôle et la correction de la charge
NF X20-215:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 4 : continuous injection method.
NF X20-217:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 6 : sonic orifices.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, XPS correction method

GB/T 13823.3-1992 Methods for the calibration of vibration and shock pick-ups. Comparison (secondary vibration) calibration by sinusoidal excitation
GB/T 12548-2016 Motor vehicles speedometer and odometer calibration method
GB/T 12548-1990 Motor vehicles--Speedometer and odometer--Calibration method
GB/T 42001-2022 Altitude correction method for external insulation flashover voltage of high voltage power transmission projects
GB/T 6730.83-2022 Iron ores—Determination of loss on ignition—Gravimetric method corrected by hygroscopic water
GB/T 13823.18-1997 Methods for the calibration of vibration and shock pick-ups. Primary vibration calibration by reciprocity method
GB/T 13823.13-1995 Methods for calibration of vibration and shock pick-ups. Primary shock calibration by light cutting
GB/T 25185-2010 Surface chemical analysis.X-ray photoelectron spectroscopy.Reporting of methods used for charge control and charge correction
GB/T 31195-2014 High chloride high ammonia wastewater.Determination of chemical oxygen demand.Chloride ion calibration method
GB/T 30952-2014 Calibration method of water level gauge test equipment
GB/T 13823.19-2008 Methods for the calibration of vibration and shock pick-ups.Calibration by Earth's gravitaiton
GB/T 13823.14-1995 Methods for the calibration of vibration and shock pick-ups. Primary calibration by centrifuge
GB/T 25934.2-2010 Methods for chemical analysis of high purity gold.Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method.Determination of impurity elements contents
GB/T 13823.7-1994 Methods for the calibration of vibration and shock pick-ups Primary vibration calibration by comparison of phase angles
GB/T 13823.10-1995 Methods for the calibration of vibration and shock pick-ups secondary shock calibration
GB/T 20485.21-2007 Methods for the calibration of vibration and shock transducers.Part 21:Vibration calibration by comparison to a reference transducer
GB/T 20485.22-2008 Methods for the calibration of vibration and shock transducers.Part 22:Shock calibration by comparison to a reference transducer
GB/T 4130-2000 Acoustics-Low frequency calibration methods of hydrophones
GB/T 13823.2-1992 Methods for the calibration of vibration and shock pick-ups. Primary vibration calibration by laser interferometry
GB/T 20485.12-2008 Method for the calibration of vibration and shock transducers.Part 12: Primary vibration calibration by the reciprocity method
GB 3223-1982 Free-field calibration method of underwater sound transducer
GB/T 14890-1994 Calibration of field pyrheliometers
GB/T 12310-1990 Sensory analysis method--Paired comparison test

CZ-CSN, XPS correction method

CSN 36 8444-1983 Magnetic calibration tapes for analogue sound reoording. Methods of measurements
CSN 56 0001-1964 Conversion and correction tables for testing methods according to CSN 56 0240 and CSN 56 0246
CSN 99 4179-1990 Grain testers. Methods of verification and calibrating
CSN 25 7509-1980 Vortical cylindrical tanks. Calibration by eometrical methods

Acoustical Society of America (ASA), XPS correction method

ASA S2.2-1959 American National Standard Methods for the Calibration of Shock and Vibration Pickups

Professional Standard - Ocean, XPS correction method

HY/T 159-2013 Method for sun photometer data calibration

American Society for Testing and Materials (ASTM), XPS correction method

ASTM E2735-13 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
ASTM E1258-88(2003) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM E1860-97a Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1860-07 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E220-02 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E1860-02 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1258-88(2008) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM E1258-88(2012) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM E2113-04 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2113-00 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM D2962-97 Standard Test Method for Calculating Volume-Temperature Correction For Coal-Tar Pitches
ASTM C1789-14 Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels
ASTM D4311/D4311M-09 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
ASTM D2162-99 Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
ASTM E2254-13 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-11 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2254-03 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM G167-05(2010) Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
ASTM G167-05 Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
ASTM G167-15 Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
ASTM D6027-96(2004) Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes
ASTM E1448/E1448M-09 Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM B810-01 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM B810-00 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM B810-01a Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM B810-01a(2017) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM E3163-18 Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action
ASTM E2861-11 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
ASTM D7622-10 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM F1870-99 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
ASTM F1317-98 Standard Test Method for Calibration of Microwave Ovens
ASTM F1317-98(2002) Standard Test Method for Calibration of Microwave Ovens
ASTM F1317-98(2007) Standard Test Method for Calibration of Microwave Ovens
ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM C1590-04 Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
ASTM D7622-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D7622-10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM F1317-98(2012) Standard Test Method for Calibration of Microwave Ovens
ASTM E306-71(1976)e1 Method for Absolute Calibration of Reflectance Standards
ASTM F1317-98(2019) Standard Test Method for Calibration of Microwave Ovens

International Organization for Standardization (ISO), XPS correction method

ISO 16063-12:2002 Methods for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
ISO/CD 5861 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO/DIS 5861:2023 Surface chemical analysis — X-ray photoelectron spectroscopy — Method of intensity calibration for quartz-crystal monochromated Al Kα XPS instruments
ISO 5347-3:1993 Methods for the calibration of vibration and shock pick-ups; part 3: secondary vibration calibration
ISO 16063-12:2002/Cor 1:2008 Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method — Technical Corrigendum 1
ISO 16531:2013 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
ISO 6145-1:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
ISO 18314-2:2015 Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power
ISO 18314-2:2023 Analytical colorimetry — Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade and hiding power
ISO 27306:2009 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
ISO 27306:2016 Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
ISO 6145-1:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 1 : Methods of calibration
ISO 6142:1981 Gas analysis; Preparation of calibration gas mixtures; Weighing methods
ISO 19318:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
ISO 19318:2021 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
ISO 16063-21:2003/CD Amd 2 Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 2
ISO 12963:2017/Amd 1:2020 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - Amendment 1: Correction to Formula 5
ISO 8466-2:1993 Water quality; calibration and evaluation of analytical methods and estimation of performance characteristics; part 2: calibration strategy for non-linear second order calibration functions
ISO 16063-44:2018 Methods for the calibration of vibration and shock transducers — Part 44: Calibration of field vibration calibrators
ISO 20411:2018 Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
ISO 16063-21:2003 Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison with a reference transducer
ISO 8466-2:2001 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions
ISO 5347-7:1993 Methods for the calibration of vibration and shock pick-ups; part 7: primary calibration by centrifuge
ISO 16063-17:2016 Methods for the calibration of vibration and shock transducers - Part 17: Primary calibration by centrifuge
ISO 14934-3:2012 Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method

Professional Standard - Petroleum, XPS correction method

SY/T 5784-1993 Correction and Calculation Method of Perforation Layer Depth
SY/T 6704-2007 Calibration method of inclinometer calibration facility
SY/T 6759-2009 Calibration method of the calibration device for indicator
SY 6759-2009 Calibration method of dynamometer calibration device
SY/T 6976-2014 Calibration methods of caliper rings
SY/T 6740-2008 The calibration method of caliper
SY/T 6813-2010 The calibration method of the down hole temperature logging tool
SY/T 6861-2012 Calibration method of drilling bit gauge
SY 6861-2012 Drill gauge calibration method
SY 6740-2008 Caliper Calibration Methods
SY 6813-2010 Calibration method of well temperature instrument
SY 6976-2014 Caliper Calibration Method
SY/T 6588-2006 Calibration methods for electric log tools
SY/T 6588-2012 Calibration methods for electric log tools
SY 6588-2012 Calibration method of electrical logging tool
SY/T 6860-2012 Calibration method for master gauge of taper thread used in oil industry
SY 6860-2012 Calibration method of oil-specific taper thread calibration gauge
SY/T 6808-2010 Calibration method for claystone densimeter
SY/T 6627-2005 The calibration method of the seismic data recording system
SY/T 6579-2003 The calibration method for density tool
SY/T 6661-2006 Calibration methods for geophone
SY/T 6532-2002 The calibration method for induced polarization instrument
SY/T 6675-2007 Calibration method of the down hole flow meter gauge
SY/T 6678-2007 Calibration method of the electronic dynamometer
SY/T 6627-2012 Calibration method of the seismic data recording system
SY/T 6661-2012 Calibration methods for geophone
SY 6808-2010 Calibration method of mudstone density meter
SY 6675-2007 Downhole Flow Meter Calibration Method
SY 6678-2007 Calibration method of electronic dynamometer
SY 6532-2002 Calibration method of induced polarimeter
SY 6661-2012 Geophone Calibration Methods
SY 6627-2012 Calibration Method of Digital Seismograph
SY/T 6742-2008 The calibration method for torque gauge of casing tong
SY/T 6817-2010 Calibration method of the shock-resistant pressure gauge
SY/T 6639-2005 The calibration method of geophone tester
SY/T 6676-2007 Calibration method of drilling fluid density meter
SY/T 6639-2012 Calibration method for geophone tester
SY/T 6862-2012 Calibration method of source synchronization system
SY/T 6587-2012 The calibration method for electronic inclinometer
SY/T 6905-2012 Calibration method for liquid resistivity tools
SY 6905-2012 Liquid Resistivity Meter Calibration Method
SY 6742-2008 Casing tong torque meter calibration method
SY 6862-2012 Calibration method of remote control explosion system
SY 6639-2012 Geophone Tester Calibration Method
SY 6676-2007 Drilling Fluid Density Meter Calibration Method
SY 6817-2010 Anti-shock pressure gauge calibration method
SY 6587-2012 Calibration method of electronic well inclinometer
SY/T 7077-2016 The calibration method of Gamma-ray calibrator
SY/T 7078-2016 The calibration for neutron lifetime logging tool
SY/T 7079-2016 The calibration method of neutron calibrator
SY/T 7082-2016 The calibration method of neutron tool
SY/T 6743-2008 The calibration method of gamma-ray tool
SY/T 6815-2010 Calibration method of the measurment separator for oilwell
SY/T 6674-2006 The transformation method of density logging calibrator
SY/T 6758-2009 Calibration method of lithological density log tool
SY/T 6866-2012 Calibration method of shale swelling tester
SY 7077-2016 Natural Gamma Scale Calibration Method
SY 7079-2016 Calibration method of compensated neutron scaler
SY 6815-2010 Calibration Method of Oil Well Metering Separator
SY 6866-2012 Shale dilatation tester calibration method
SY 6674-2006 Density logging calibration method
SY/T 6978-2014 The calibration method of the drilling fluid rotary viscometer
SY/T 7075-2016 Calibration specification for the petroleum drilling/workover weight indicating system
SY/T 6809-2010 Calibration method for carbonate analyser of rock
SY/T 6814-2010 Calibration method of the double-channel echo instrument
SY/T 6640-2005 The calibration methodology of the down hole electronic pressure gauge
SY/T 6640-2012 Calibration method for the down hole electronic pressure gauge
SY/T 6864-2012 Calibration method of drilling fluid funnel
SY/T 6904-2012 The calibration method of production well logging surface system
SY 6809-2010 Calibration Methods for Rock Carbonate Analyzers
SY 6814-2010 Calibration method of dual-channel echo tester
SY 7075-2016 Calibration method of weight gauge for oil drilling and workover
SY 6640-2012 Calibration method of electronic downhole pressure gauge
SY 6904-2012 Calibration method of production logging surface system

Military Standard of the People's Republic of China-General Armament Department, XPS correction method

GJB 10095-2021 Atmospheric synchronous correction method for optical satellite images
GJB 4495-2002 Correction method for changes in shooting accuracy during the life of tank gun barrel
GJB 1567.2-1992 Error control method for voice band modems. Error correction method for DCE with asynchronous to synchronous conversion.
GJB 6374-2008 Performance calibration flight of airborne TT&C station
GJB 6373-2008 Ground calibration methods on airborne TE&C equipments
GJB 1808-1993 Calibration method of vacuum gauge dynamic flow method
GJB 7901-2012 Calibration method of space tracking, telemetering and command ship at dock

Professional Standard - Medicine, XPS correction method

YY/T 1546-2017 Test method for CT attenuation correction in SPECT imaging

Professional Standard - Electron, XPS correction method

SJ/T 31035-1994 Requirements of readiness and methods of inspection and assessment for bend dressing machines

Professional Standard - Machinery, XPS correction method

JB/T 12043.2-2015 Hydraulic timing advance plunger for diesel engine.Part 2: Test method
JB/T 8957-1999 Method for verifying accuracy of tan delta measurements applicable to capacitors

RU-GOST R, XPS correction method

GOST R ISO 11095-2007 Statistical methods. Linear calibration using reference materials
GOST 8.239-1977 State system for ensuring the uniformity of measurements. Polarimetric plates. Methods and means of calibration
GOST 8.305-1978 State system for ensuring the uniformity of measurements. Manometric thermometers. Methods and means of calibration
GOST 8.449-1981 State system for ensuring the uniformity of measurements. D. c. bridges. Methods and means of calibration
GOST 8.298-1978 State system ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Methods and means of calibration
GOST 8.317-1978 State system for ensuring the uniformity of measurements. Standard glass mercury thermometers. Methods and means of calibration
GOST R 8.854-2013 State system for ensuring the uniformity of measurements. Standard platinum and rhodium-iron resistance thermometers. Methods of calibration
GOST 8.553-1988 State system for ensuring the uniformity of measurements. Electronic octave and third-octave filters. Methods and means of calibration
GOST R ISO 11843-2-2007 Statistical methods. Capability of detection. Part 2. Methodology in the linear calibration case

KR-KS, XPS correction method

KS C IEC 62585-2017 Electroacoustics ― Methods to determine corrections to obtain the free-field response of a sound level meter
KS B ISO 16063-12-2018 Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method

International Commission on Illumination (CIE), XPS correction method

CIE 182-2007 CALIBRATION METHODS AND PHOTOLUMINESCENT STANDARDS FOR TOTAL RADIANCE FACTOR MEASUREMENTS

AASHTO - American Association of State Highway and Transportation Officials, XPS correction method

T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
T 224-2001 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test

The American Road & Transportation Builders Association, XPS correction method

AASHTO T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
AASHTO T 224-2001 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test

Society of Automotive Engineers (SAE), XPS correction method

SAE ARP958D-1999 Electromagnetic Interference Measurement Antennas; Standard Calibration Method
SAE AIR1075A-1996 Barometry for Altimeter Calibration
SAE ARP958E-2021 Electromagnetic Interference Measurement Antennas; Calibration Method

German Institute for Standardization, XPS correction method

DIN EN 62585:2013-03 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter (IEC 62585:2012); German version EN 62585:2012
DIN EN ISO 26101-2:2023-02 Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO/DIS 26101-2:2023); German and English version prEN ISO 26101-2:2023 / Note: Date of issue 2023-01-13
DIN EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004
DIN EN ISO 2719/A1:2020 Determination of flash point - Pensky-Martens closed cup method - AMENDMENT 1: Thermometers correction (ISO 2719:2016/DAM 1:2020); German and English version EN ISO 2719:2016/prA1:2020
DIN ISO 18314-2:2017 Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power (ISO 18314-2:2015)
DIN EN ISO 26101-2:2023 Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO/DIS 26101-2:2023); German and English version prEN ISO 26101-2:2023
DIN EN ISO 8990:1996 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994); German version EN ISO 8990:1996
DIN ISO 16063-21/A2:2020 Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer - AMENDMENT 2 (ISO 16063-21:2003/DAM 2:2020); Text in German and English
DIN ISO 8466-2:2004 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions (ISO 8466-2:2001)

Danish Standards Foundation, XPS correction method

DS/EN 62585:2013 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
DS/EN ISO 2719:2021 Determination of flash point – Pensky-Martens closed cup method – Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)

European Committee for Electrotechnical Standardization（CENELEC）, XPS correction method

EN 62585:2012 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter

AENOR, XPS correction method

UNE-EN 62585:2013 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
UNE-EN 1015-9:2000 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 9: DETERMINATION OF WORKABLE LIFE AND CORRECTION TIME OF FRESH MORTAR.

API - American Petroleum Institute, XPS correction method

API RP 2556-1968 Recommended Practice for Correcting Gage Tables for Incrustation (FIRST EDITION)
API STD 2555-1966 Method for Liquid Calibration of Tanks (First Edition)

National Metrological Technical Specifications of the People's Republic of China, XPS correction method

JJF 1370-2012 Calibration Specification for Dynamic Characteristics of Force Transducer under Sinusoidal Loading
JJF 1257-2010 Calibration Guideline of the Temperature Block Calibrators
JJF(电子) 05-1982 Verification Method of DO-29 Calibration Receiver

ES-UNE, XPS correction method

UNE-EN ISO 2719:2017/A1:2021 Determination of flash point - Pensky-Martens closed cup method - Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)
UNE-EN ISO 18314-2:2019 Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power (ISO 18314-2:2015)

国家能源局, XPS correction method

SY/T 6704-2019 Calibration method of well inclination instrument calibration device
SY/T 7325-2016 Drilling fluid shear gauge calibration method
SY/T 6864-2020 Drilling fluid viscometer calibration method
SY/T 6676-2022 Drilling fluid density meter calibration method
SY/T 6587-2021 Calibration method of electronic well inclination instrument
SY/T 7383-2017 Calibration method of oil level gauge
SY/T 7418-2018 Sucker Rod Thread Gauge Calibration Method
SY/T 7324-2016 X-ray fluorescence logging instrument calibration method
SY/T 7384-2017 Calibration method for oil, gas and water multi-item flow meters

International Telecommunication Union (ITU), XPS correction method

ITU-R BT.1306-6-2011 Error-correction data framing modulation and emission methods for digital terrestrial television broadcasting
ITU-T J.149 SPANISH-2004 Method for specifying accuracy and cross-calibration of Video Quality Metrics (VQM)
ITU-T J.149 FRENCH-2004 Method for specifying accuracy and cross-calibration of Video Quality Metrics (VQM)
ITU-T P.61-1988 METHODS FOR THE CALIBRATION OF CONDENSER MICROPHONES
ITU-T P.61 FRENCH-1988 METHODS FOR THE CALIBRATION OF CONDENSER MICROPHONES
ITU-T P.61 SPANISH-1988 METHODS FOR THE CALIBRATION OF CONDENSER MICROPHONES

工业和信息化部, XPS correction method

YS/T 3041.3-2021 Calibration method for determination of silver content in metal ores, concentrates and corresponding materials by fire assay method Part 3: Slag recovery and ash blowing calibration method
YS/T 3041.1-2021 Calibration method for determination of silver content in metal ores, concentrates and corresponding materials by fire assay method Part 1: Full-process recovery method
YS/T 3041.2-2021 Calibration method for determination of silver content in metallic ores, concentrates and corresponding materials by fire assay Part 2: Slag and ash pan recovery method

European Committee for Standardization (CEN), XPS correction method

EN ISO 18314-2:2023 Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power (ISO 18314-2:2023)
EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
prEN ISO 26101-2 Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO/DIS 26101-2:2023)

CEN - European Committee for Standardization, XPS correction method

EN ISO 18314-2:2018 Analytical colorimetry - Part 2: Saunderson correction@ solutions of the Kubelka-Munk equation@ tinting strength@ hiding power

Group Standards of the People's Republic of China, XPS correction method

T/SJZSYYQXH JZ002-2023 Cutter calibration method
T/HBJLXH 002-2023 Calibration method of anti perforation instrument
T/SJZSYYQXH JZ005-2023 Cold bending core calibration method
T/SASE 006-2022 Calibration method of elevator speed limiter
T/HBJLXH 004-2023 Calibration method for wheel rolling machine
T/HBJLXH 001-2022 Calibration Method of Rolling Forming Machine
T/HBJLXH 007-2023 Mortar mixer calibration method
T/HBJLXH 008-2023 Calibration method of temperature rise testing machine
T/HBJLXH 006-2023 Ball pressure tester calibration method
T/SJZSYYQXH JZ003-2023 Drilling and coring machine calibration method
T/CMA 039-2021 Calibration method for gasoline octane number machines
T/CMA 031-2021 Calibration method for basic nitrogen meters
T/SJZSYYQXH JZ006-2023 Calibration method of lightweight aggregate pressure-bearing cylinder
T/HBJLXH 001-2023 Low temperature brittleness testing machine calibration method
T/CSTM 00162-2020 Calibration methods for transmission electron microscope
T/CMA 038-2021 Calibration method for diesel fuel cetane number machines
T/HBJLXH 009-2023 Surface Vibration Compactor Calibration Method
T/HBJLXH 005-2023 Creepage distance test card calibration method
T/HNIMA 002-2023 Calibration method of soldering furnace temperature parameters
T/SJZSYYQXH JZ008-2023 Calibration method of low temperature temperature tester
T/CMA HG110-2023 Calibration Method for On-Line Turbidimeters
T/CMA 034-2021 Calibration method for salt content meters analyzers
T/CSTM 00159-2020 Calibration methods of portable Raman spectroscopy
T/HBJLXH 003-2023 Calibration method for asphalt wax content tester
T/HBJLXH 003-2022 Calibration Method of Free calcium oxide analyzer
T/SJZSYYQXH JZ004-2023 Calibration method of anti-bending fixture and splitting fixture

PL-PKN, XPS correction method

PN N01625-1976 Technical drawings. Designation of places to calibration and marking of products
PN-EN ISO 2719-2016-08/A1-2021-06 E Determination of flash point--Pensky-Martens closed cup method--Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)

International Electrotechnical Commission (IEC), XPS correction method

IEC 60891:1987 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicone photovoltaic devices
IEC 60891:2009 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
IEC 62585:2012 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
IEC 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors
IEC 60891/AMD1:1992 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices; amendment 1
IEC 62129:2006 Calibration of optical spectrum analyzers
IEC 61578:1997 Radiation protection instrumentation - Calibration and verification of the effectiveness of radon compensation for alpha and/or beta aerosol measuring instruments - Test methods

Professional Standard - Environmental Protection, XPS correction method

HJ/T 70-2001 High-chlorine wastewater.Determination of chemical oxygen demand.Chlorine emendation method

国家市场监督管理总局、中国国家标准化管理委员会, XPS correction method

GB/T 37776-2019 Methods for the calibration of dynamic force transducers—Calibration by shock force
GB/T 40961-2021 Calibration methods of rock triaxial testing apparatus

Lithuanian Standards Office , XPS correction method

LST EN 62585-2013 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter (IEC 62585:2012)
LST EN ISO 2719/A1:2021 Determination of flash point - Pensky-Martens closed cup method - Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)

CH-SNV, XPS correction method

SN EN ISO 2719/A1:2021 Determination of flash point - Pensky-Martens closed cup method - Thermometers correction (ISO 2719:2016/Amd 1:2021); Amendment A1

Professional Standard - Water Conservancy, XPS correction method

SL 114-2014 Code for calibration of oedometers
SL 137-1995 Method for calibration of length measuring instrument
SL 144.5-2008 Calibration method of centrifuge
SL 127-2017 Volume cylinder calibration method
SL 115-2014 Permeameter Calibration Method
SL 112-1995 Calibration method of compaction instrument
SL 111-1995 Permeable board calibration method
SL 111-2017 Permeable board calibration method
SL 112-2017 Calibration method of compaction instrument
SL 110-2014 Code for calibration of annular sword
SL 110-1995 Calibration method of soil cutting ring knife
SL 144.1-2008 Calibration method of biology microscopes
SL 144.3-2008 Calibration method of biochemical incubator
SL 144.8-2008 Calibration method of microwave heating system
SL 144.11-2008 Calibration method of control-temperature furnace
SL 121-2012 Calibrating methods of rock direct shear testing instrument
SL 130-2017 Concrete mold test verification method
SL 597-2012 Calibration method of anchor cable dynamometer
SL 133-2014 Calibration methods for water permeability testing instrument of concrete
SL 133-1995 Method for calibration of apparatus for concrete resisting permeability
SL 144.10-2008 Calibration method of solid-phase extractor (SPE)
SL 125-2017 Cement mortar test mode verification method
SL 114-1995 Calibration method of lever consolidation instrument
SL 119-1995 Calibrating methods of rock treaxial testing apparatus
SL 122-1995 Calibrating Methods of Measurement Instrument of Rock
SL 131-1995 Method for calibration of apparatus for concrete slump test
SL 144.4-2008 Calibration method of electro-thermal incubator
SL 144.6-2008 Calibration method of constant temperature water-bath
SL 144.7-2008 Calibration method of electric air blowing dryer
SL 144.9-2008 Calibration method of accelerated solvent extractor (ASE)
SL 119-2012 Calibrating methods of rock triaxial testing apparatus
SL 122-2012 Calibrating methods of measurement instrument of rock deformation
SL 131-2017 Concrete slump meter calibration method
SL 124-2014 Calibration methods for testing instrument of hydration heat of cement
SL 118-2014 Code for calibration of strain-controlled triaxial apparatus
SL 121-1995 Calibrating methods of rock direct shear testing instrument
SL 116-2012 Calibrating methods for strain-controlled direct shear apparatus
SL 116-1995 Calibration method of strain-controlled direct shear instrument
SL 118-1995 Calibration method of strain-controlled triaxial instrument

水利部, XPS correction method

SL/T 127-2017 Capacity cylinder calibration method
SL/T 115-2014 Penetration meter calibration method
SL/T 111-2017 Permeable board calibration method
SL/T 114-2014 Consolidation instrument calibration method
SL/T 112-2017 Compaction instrument calibration method
SL/T 110-2014 Soil cutting ring knife calibration method
SL/T 130-2017 Concrete test mold verification method
SL 509-2012 Grouting recorder calibration method
SL/T 125-2017 Cement mortar test mold verification method
SL/T 133-2014 Calibration method of concrete impermeability meter
SL/T 131-2017 Calibration method of concrete slump meter
SL/T 124-2014 Calibration method of cement hydration heat meter
SL/T 118-2014 Calibration method of strain controlled triaxial instrument

GOSTR, XPS correction method

GOST R 58400.4-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method for determination of volume correction
GOST R 59144-2020 Methods for calibration of ships tanks

ZA-SANS, XPS correction method

SANS 16063-31:2009 Methods for the calibration of vibration and shock transducers Part 31: Testing of transverse vibration sensitivity

Hebei Provincial Standard of the People's Republic of China, XPS correction method

DB13/T 5291-2020 Constant temperature platform calibration method
DB13/T 5292-2020 Calibration Method of Digital Source Meter Test System

YU-JUS, XPS correction method

JUS N.N6.180-1978 Radio Communications. Wired distribution sistems. Methods of measurements. RF signal to noise ratio. Correction factors.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, XPS correction method

GB/T 32998-2016 Surface chemical analysis—Auger electron spectroscopy—Reporting of methods used for charge control and charge correction
GB/T 33868-2017 Calibration method for ultraviolet radiometer
GB/T 34326-2017 Surface chemical analysis—Depth profiling—Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
GB/T 20485.16-2018 Methods for the calibration of vibration and shock transducers—Part 16: Calibration by Earth's gravitation
GB/T 4130-2017 Acoustics—Low frequency calibration methods of hydrophones
GB/T 33865-2017 Calibration method for photosynthetic active radiometer

Professional Standard-Ships, XPS correction method

CB 3209-1983 Hydraulic Dynamometer Calibration Method
CB* 3209-1983 Hydraulic Dynamometer Calibration Method

Guangdong Provincial Standard of the People's Republic of China, XPS correction method

DB44/T 1392-2014 Safety valve automatic calibration method

GB-REG, XPS correction method

REG NASA-LLIS-1363-2003 Lessons Learned ?Risk Management (RM): The Use of Formal Versus Informal Methods

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., XPS correction method

IEEE 643 CORR 1-2013 Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction

Professional Standard - Meteorology, XPS correction method

QX/T 257-2015 Calibration method of hair hygrometer(hygrograph)

国家发展和改革委员会, XPS correction method

SY/T 6588-2003 Calibration method of dual laterologging tools

CN-STDBOOK, XPS correction method

图书 3-9797 General rules and calibration specifications for instrument analysis methods in colleges and universities (1)

Institute of Electrical and Electronics Engineers (IEEE), XPS correction method

IEEE/ANSI N42.25-1997 American National Standard - Calibration and usage of alpha/beta proportional counters
IEEE Std 643-2004/COR 1-2013 IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
IEEE P643-2004/Cor1/D3, August 2013 IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
IEEE Std 643-2004/Cor 1-2013 (Corrigendum to IEEE Std 643-2004) IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction

国家质量监督检验检疫总局, XPS correction method

SN/T 4429.2-2016 Determination of total mercury content in crude oil by Zeeman-corrected cold atomic absorption spectrometry

Standard Association of Australia （SAA）, XPS correction method

AS 2300.1.7/SUPP 1:1990 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of extraneous matter in dairy products - Reference print (Supplement to AS 2300.1.7-1990)

American Society of Mechanical Engineers (ASME), XPS correction method

ASME N-543-2001 Alternative to Performing Periodic Calibration Checks Section XI, Division 1 ANNULLED

Professional Standard - Chemical Industry, XPS correction method

HG/T 2617-1994 Determination method of film base tangent value

TR-TSE, XPS correction method

TS 2910-1977 IRON ORES - EXPERIMENTAL METHODS FOR CHECKING THE PRECISION OF SAMPLING

IT-UNI, XPS correction method

UNI 4768-1961

VN-TCVN, XPS correction method

TCVN 6661-2-2009 Water quality.Calibration and evaluation of analytical methods and estimation of performance charactenstcs.Part 2.Calibration strategy for non-linear second-order calibration functions

Indonesia Standards, XPS correction method

SNI 13-6663-2002 Calibration method for probex-1 dilatometer

未注明发布机构, XPS correction method

BS 6888:1988(2000) Methods for Calibration of bonded electrical resistance strain gauges