ZH
RU
ES
Densitometer work
Densitometer work, Total:242 items.
In the international standard classification, Densitometer work involves: Medical equipment, Non-destructive testing, Optoelectronics. Laser equipment, Equipment for petroleum and natural gas industries, Environmental testing, Document imaging applications, Soil quality. Pedology, Machine tools, Measurement of volume, mass, density, viscosity, Astronomy. Geodesy. Geography, Electricity. Magnetism. Electrical and magnetic measurements, Optical equipment, Lubricants, industrial oils and related products, Occupational safety. Industrial hygiene, Machine tool systems, Construction industry, Metrology and measurement in general, Air quality, Analytical chemistry, Optics and optical measurements, Iron and steel products, Aerospace electric equipment and systems, Earth-moving machinery, Products of the textile industry, Protective equipment, Fruits. Vegetables, Solar energy engineering, Technical drawings, Vocabularies, Graphic technology, Radiocommunications, Insulating materials, Glass, Ceramics, Chipless working equipment, Lighting.
National Metrological Verification Regulations of the People's Republic of China, Densitometer work
- JJG 299-1982 Verification Regulation of Working Standard Sensitometer
- JJG 756-1991 Verification Regulation of Working Standard Equipment for Optical Density
- JJG 370-1984 Verification Regulation of Working Vibration Tube Liquid Density Meter
U.S. Military Regulations and Norms, Densitometer work
Professional Standard - Nuclear Industry, Densitometer work
RU-GOST R, Densitometer work
- GOST 22091.14-1986 X-ray devices. The method of measuring the energy flow density (photon flux density) of X-radiation
- GOST 2110-1993 Horizontal boring machines with compound table. Standarts of accuracy
- GOST 2110-1985 Horizontal boring machines. Standards of accuracy
- GOST R ISO 13694-2010 Optics and optical instruments. Laser and laser-related equipment. Test methods for laser beam power (energy) density distribution
- GOST R 57080-2016 Medical electrical equipment. H-Ray Bone Densitometer (Absorptiometer). Technical requirements for governmental purchases
- GOST 21316.6-1975 Photocells. Determination method of correspondence of current-illumination characteristic of photocell to given linearity limit in continuous operation conditions
- GOST 21316.7-1975 Photocells. Determination method of correspondence of current-illumination characteristic of photocell to given linearity limit in pulsed operation conditions
German Institute for Standardization, Densitometer work
- DIN 18723-4:1990 Field procedure for precision testing of surveying instruments; optical distance measuring instruments
- DIN 58397-2:2012-03 Production in optical engineering - Testing of lubricating greases for precision engineering and optical instruments - Part 2: Spreading
- DIN 1045-3:2012-03 Production in optical engineering - Testing of lubricating greases for precision engineering and optical instruments - Part 2: Spreading
- DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
- DIN 58397-1:2011-07 Production in optical engineering - Testing of lubricating greases for precision engineering and optical instruments - Part 1: Evaporation loss
- DIN 58397-2:2012 Production in optical engineering - Testing of lubricating greases for precision engineering and optical instruments - Part 2: Spreading
- DIN 58395:2015-10 Production in optical engineering - Lubricants for precision engineering and optical equipment - Minimal requirements and temperature ranges
- DIN 33899-3:2014-09 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
- DIN 58395:2015 Production in optical engineering - Lubricants for precision engineering and optical equipment - Minimal requirements and temperature ranges
- DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
- DIN 58397-1:2011 Production in optical engineering - Testing of lubricating greases for precision engineering and optical instruments - Part 1: Evaporation loss
- DIN EN ISO 13694 Berichtigung 1:2008 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000); German version EN ISO 13694:2000, Corrigendum to DIN EN ISO 13694:2000-11; German version EN ISO 13694:
- DIN EN 10267:1998 Ferritc-pearlitic steels for precipitation hardening from hot-working temperatures; German version EN 10267:1998
- DIN 33899-3:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
- DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
- DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
- DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
- DIN 5031-6:1982-03 Physics of radiation in the field of optics and illuminating engineering; pupil intensity as a measure of retinal illumination
- DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
- DIN EN 13032-3:2022-01 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of workplaces; German version EN 13032-3:2021 / Note: Applies in conjunction with DIN EN 13032-1 (2012-0...
- DIN EN 3545-001:2009 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 001: Technical specification; German and English version EN 3545-001:2008
- DIN EN 3545-007:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 007: Cable clamp - Product standard; German and English version EN 3545-007:2005
- DIN EN 13032-2:2018-03 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places; German version EN 13032-2:2017
Standard Association of Australia （SAA）, Densitometer work
- AS 2563:2019 Iron ores — Wavelength dispersive X-ray fluorescence spectrometers — Determination of precision
- AS/NZS ISO 13694:2004 Optics and optical instruments - Lasers and laser-related equipment -Test methods for laser beam power (energy) density distribution
- AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
- AS 1289.5.8.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture?Density gauge - Direct transmission mode
- AS 1289.5.8.5:1998 Methods of testing soils for engineering purposes - Soils compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block
- AS 1289.5.8.4:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Calibration using standard blocks
- AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
- AS 1289.5.8.7:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components
- AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
- AS/NZS 1680.3:2017 Interior and workplace lighting, Part 3: Measurement, calculation and presentation of photometric data
British Standards Institution (BSI), Densitometer work
- PD ISO/TR 18231:2016 Iron ores. Wavelength dispersive X-ray fluorescence spectrometers. Determination of precision
- BS EN ISO 13694:2001 Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
- BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
- BS EN 3372-005:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, solder mounting - Product standard
- BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
- BS EN 3372-001:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Technical specification
- BS EN 3545-007:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 007: Cable clamp — Product standard
- BS EN 3545-007:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Cable clamp - Product standard
- BS ISO 9337-1:1999 Contact lenses. Determination of back vertex power. Method using focimeter with manual focusing
- BS EN 3372-007:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Protective cover for plug - Product standard
- BS EN 3372-002:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Specification of performance and contact arrangement
- BS EN 3372-003:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Square flange receptacle - Product standard
- BS EN 3372-011:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Dummy receptacle - Product standard
- BS EN 3372-006:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Protective cover for receptacle - Product standard
- BS EN 3545-001:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures –55 ℃ to 175 ℃ — Part 001: Technical specification
- BS EN 3545-007:2014 Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C. Cable clamp. Product standard
- BS EN 3372-009:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, jam nut mounting - Product standard
- BS EN 3372-008:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Free plug with grounding spring - Product standard
- BS PD CEN/TR 16013-2:2010 Workplace exposure — Guide
for the use of direct-reading instruments for aerosol
monitoring
Part 2: Evaluation of airborne particle
concentrations using Optical Particle
Counters
- BS EN ISO 18452:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thickness of ceramic films by contact-probe profilometer
- BS EN 3545-002:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 002: Specification of performance and contact arrangements
- BS EN 3545-001:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Technical specification
- BS EN 3545-003:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Connectors with female contacts - Product standard
- BS EN 3545-003:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 003: Connectors with female contacts — Product standard
- BS EN 13032-3:2021 Tracked Changes. Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Presentation of data for emergency lighting of workplaces
Korean Agency for Technology and Standards (KATS), Densitometer work
- KS B ISO 13694:2015 Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
- KS B ISO 13694:2006 Optics and optical instruments-Lasers and laser-related equipments-Test methods for laser beam power(energy) density distribution
- KS B ISO 13694-2015(2020) Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution
- KS B ISO 15212-2-2006(2021) Oscillation-type density meters－Part 2：Process instruments for homogeneous liquids
- KS B ISO 15212-2-2006(2016) Oscillation-type density meters－Part 2：Process instruments for homogeneous liquids
- KS D ISO 11692-2003(2013) Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
- KS B ISO 10263-6:2012 Earth-moving machinery－Operator enclosure environment－ Part 6：Determination of effect of solar heating
- KS C 3390-2022 Power density measurement method of the portable wireless transmission equipment operating above 6 GHz
- KS B ISO 11090-2:2014 Machine tools-Test conditions for die sinking electro-discharge machines(EDM)-Terminology and testing of accuracy-Part 2:Two column machines(slide-head type and cross-slide table type)
- KS B ISO 11090-2:2015 Test conditions for die sinking electro-discharge machines(die sinking EDM) — Testing of the accuracy — Part 2: Double-column machines(slide-head type)
- KS B ISO 11090-2:2012 Machine tools-Test conditions for die sinking electro-discharge machines(EDM)-Terminology and testing of accuracy-Part 2:Two column machines(slide-head type and cross-slide table type)
International Organization for Standardization (ISO), Densitometer work
- ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution
- ISO 13694:2000/Cor 1:2005 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution; Technical Corrigendum 1
- ISO 18452:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer
American Society for Testing and Materials (ASTM), Densitometer work
- ASTM G153-00a Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-00ae1 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-00 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM E2108-00 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
- ASTM E902-94(1999) Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
- ASTM D4185-06(2011) Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
- ASTM E1809-96 Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retrorelectometer
- ASTM D4185-96(2001)e1 Standard Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption Spectrophotometry
- ASTM D4185-96 Standard Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption Spectrophotometry
- ASTM E180-85 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals
- ASTM E1809-01 Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer
- ASTM D4185-23 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
- ASTM F1443-93(2003) Standard Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images
- ASTM D3554-07 Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 176;C Operation
- ASTM D3554-07(2013) Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 deg;C Operation
PL-PKN, Densitometer work
- PN Z04015-09-1990 Air purity protection Tests for sulphur and its compounds Determination of carbon disulphide vapours in work places usjng spectrophotometric analyzer
- PN Z04522-2020-11 P Air purity protection -- Determination of adipic acid in workplaces by high performance liquid chromatography with spectrophotometric detection
- PN Z04185-02-1988 Air purity protection Tests for iodine Determination of iodine in work places by absorption spectrophotometry in visible region
- PN Z04186-02-1988 Air purity protection Tcsts for molybdenum Determination ot molybdenum in work places by absorption spectrophotometry in visible region
- PN Z04523-2020-12 P Air purity protection -- Determination of hydrazine in workplaces by high performance liquid chromatography with spectrophotometric detection
- PN S47044-1993 Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degree max.)
- PN Z04521-2020-12 P Air purity protection -- Determination of maleic anhydride in workplaces by high performance liquid chromatography with spectrophotometric detection
- PN Z04171-02-1986 Air purity protection ests for picric acid etermination of picric acid n work places by UV pectrophotometry absorption
- PN Z04009-03-1990 Air purity protection Tests for nitrogen compounds Determination of ammonia in work places by spectrophotometry in visible spectra] region, indopheno] method
- PN Z04524-2020-12 P Air purity protection -- Determination of ethylenediamine in workplaces by high performance liquid chromatography with spectrophotometric detection
- PN Z04113-07-1988 Air punty protection Tests for aerylic compounds Determination of acrylonitrile in work places by spectrophotometry in visible region
- PN Z04176-02-1986 Air purity protection ests for MCPA etermination of MCPA in work laces by gas chromatography
- PN Z04525-2020-12 P Air purity protection -- Determination of pentachlorophenol in workplaces by high performance liquid chromatography with spectrophotometric detection
- PN Z04529-2021-07 P Air purity protection -- Determination of 2-tolylamine in workplaces by high performance liquid chromatography with spectrophotometric detection
- PN Z04530-2021-07 P Air purity protection -- Determination of 2-nitroanisole in workplaces by high performance liquid chromatography with spectrophotometric detection
- PN Z04204-02-1988 Air purity protection ests for ethylamine etermination of ethylamine in work laces by gas chromatography
- PN Z04073-05-1988 Air purity protection Tests for phosphorus and its compounds Determination of phosphorus oxychloride in work places by spectrophotometry in visible light
- PN Z04169-02-1986 Air purity.protection Tests for 4,6-dinitroorthocreso! Determination of 4,6-dinitroorthocresol in work places by UV spectrophotometry absorption
- PN Z04182-09-1987 Air purity protection ests for pesticides etermination of trichlorfon in work laces by gas chromatography
- PN Z04194-02-1988 Air punty protection Tests for phthalic anhydride Determination of phthalic anhydride in work places by spectrophotometric method with hydroxylamine hydrochloride and ferric chloride
- PN Z04073-03-1991 Air purity protection Tests for phosphorus and its compounds content Determination of phosphorus trichloride in work places by spectrophotometry
- PN Z04073-04-1991 Air purity protection Tests for phosphorus and its compounds content Determination of phosphorus pentachloride in work places by spectrophotometry
- PN Z04182-14-1989 Air purity protection Tests for pesticides Determination of trichloracetic acid in work places by spectrophotometry in yisible region
- PN Z04024-03-1991 Air punty protection Tests for barium and barium compound content Determination of barium and barium compounds in work places by flame atomie absorption spectrometric method
- PN Z04215-03-1991 Air purity protection Tests for chloracetic acid content Determination of chloracetic acid vapour in work placesby spectrophotometric method
Association Francaise de Normalisation, Densitometer work
- NF EN ISO 15212-2:2002 Densimètres à oscillation - Partie 2 : instruments industriels pour liquides homogènes
- NF B35-212-2*NF EN ISO 15212-2:2002 Oscillation-type density meters - Part 2 : process instruments for homogeneous liquids
- NF E11-020:2020 Length measuring instruments - Limit gauges and working standards - Terminology - Shortened designation
- FD CEN/TR 16013-3:2012 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 3 : évaluation des concentrations de particules en suspension dans l'air à l'aide de photomètres
- FD X43-711-3*FD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3 : evaluation of airborne particle concentrations using photometers
- NF E11-020:1994 Length measuring instruments. Limit gauges and working standards. Terminology. Shortened designation.
- NF X43-205:2005 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry.
- FD X43-711-2*FD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2 : evaluating airborne particle concentrations using Optical Particle Counters
- NF C57-113-2*NF EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2 : spectral responsivity, incidence angle and module operating temperature measurements
- NF S10-008-8:2010 Optics and photonics - Preparation of drawings for optical elements and systems - Part 8 : surface texture - Roughness and waviness.
- FD CEN/TR 16013-2:2010 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 2 : évaluation des concentrations de particules en suspension dans l'air à l'aide de compteurs optiques de particules
- NF P78-470:2015 Glass in building - Calculation of the temperatures of components and the forces in seals for insulating glass units without solar protection
- NF EN 3545-008:2007 Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 oC à 175 oC - Partie 008 : outils d'assemblage/démontage du syst...
- NF ISO 7632:1987 Véhicules routiers - Joints en caoutchouc pour cylindres de freins hydrauliques à disque utilisant un liquide de frein à base pétrolière (température maximale d'utilisation 120 degrés Celsius)
- FD CEN/TR 13205-3:2014 Exposition sur les lieux de travail - Évaluation des performances des instruments de mesurage des concentrations d'aérosols - Partie 3 : Analyse des données d'efficacité de prélèvement
- NF X90-011-3*NF EN 13032-3:2021 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3 : presentation of data for emergency lighting of workplaces
- NF L54-175-001*NF EN 3545-001:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 001 : Technical specification
- NF EN 3545-001:2008 Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 oC à 175 oC - Partie 001 : spécification technique
- NF ISO 16740:2005 Air des lieux de travail - Détermination du chrome hexavalent dans les particules en suspension dans l'air - Méthode par chromatographie ionique et détection spectrophotométrique avec diphényl carbazide
- NF ISO 7631:1987 Véhicules routiers - Coupelles et joints en caoutchouc pour cylindres de dispositifs de freinage hydraulique utilisant un liquide de frein à base pétrolière (température maximale d'utilisation 120 degrés Celsius)
YU-JUS, Densitometer work
- JUS L.N4.201-1984 Operating conditions for industrial-process measurement and control equipment. Temperature, humidity and barometric pressure
Professional Standard - Medicine, Densitometer work
- YY/T 0756-2009 Optics and Optical Instruments Lasers and Laser-related Equipment Laser Beam Power (Test Method for Energy Density Distribution
Danish Standards Foundation, Densitometer work
- DS/EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
- DS/CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
- DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
- DS/CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
- DS/ENV 1071-1:1993 Advanced technical ceramics. Methods of test for ceramic coatings. Part 1: Determination of coating thickness by contact probe profilometer
Lithuanian Standards Office , Densitometer work
- LST EN ISO 13694:2000 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000)
- LST EN ISO 13694:2000/AC:2008 Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000/Cor 1:2005)
- LST EN 13205-2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
- LST EN 13032-3-2008 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Densitometer work
- ASHRAE AC-02-8-2-2002 Use of Optical Density-Based Measurements as Metrics for Smoke Detectors
- ASHRAE 4167-1998 The Effects of Temperature@ Light@ and Sound on Perceived Work Environment
Professional Standard - Electron, Densitometer work
- SJ/T 10714-1996 Standard practice for checking the operation characteristics of X-ray photoelectron spectrometers
European Committee for Standardization (CEN), Densitometer work
- EN ISO 13694:2000 Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Methods for Laser Beam Power (Energy) Density Distribution Incorporating corrigendum October 2007
- CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
- PD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
- EN ISO 105-B07:2009 Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration
- CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
- PD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
- EN 3545-007:2005 Areospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 degree C to 175 degrees C - Part 007: Cable clamp Product standard
Group Standards of the People's Republic of China, Densitometer work
- T/WSJD 18.2-2021 Spectrophotometric Method for Determination of Bromine by Chemical Factors in Air of Workplace
Professional Standard - Machinery, Densitometer work
- JB/T 11770.1-2014 High speed & precision CNC rotary table.Part 1: Testing of the accuracy
- JB/T 13156-2017 Non-destructive testing.Test method for determining the density of industrial radiographs
RO-ASRO, Densitometer work
- STAS 7826/1-1975 ISO METRIC SCREW THRFADS FOR THE 0PTICAL-MECHANICAI, AND THE INSTRUMENT MAKING INDUSTRYR asic sizes
AREMA - American Railway Engineering and Maintenance-of-Way Association, Densitometer work
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Densitometer work
- PREN 3646-011-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 011 - Dummy Sealed Receptacle (Edition: 5E)
- PREN 3646-003-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 003 - Square Flangs Sealed Receptacle (Edition: 4E)
- PREN 3646-005-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 005 - Hermetic Square Flange Receptacle (Edition: 5E)
- PREN 3646-006-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 006 - Jam-Nut Mounted Round Flange Hermetic Receptacle (Edition: 5E)
- PREN 3646-004-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty PArt 004: Jam-Nut Mounted Round Flange Sealed Receptacle (Edition: 5E)
- PREN 3646-007-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 007: Round Flange Hermetic Receptacle Attached by Brazing (Edition: 5E)
- PREN 3372-005-2005 Aeropsace Series Connectors@ Electrical@ Circular@ Medium and High Contact Density@ Scoop-Proof with Bayonet Coupling@ Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 005: Receptacle@ Hermetic@ Round Flange@ Solder
- PREN 3545-008-2005 Aerospace Series Connectors@ electrical@ rectangular@ with sealed and non-sealed rear@ plastic housing@ locking device@ operating temperatures - 55 degrees C to 175 degrees C Part 008: Tools for assembly emoval of coding and attachment system Product stan
- PREN 3545-001-2004 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification (Edition P 3)
- PREN 3545-001-2002 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification (Edition P 2)
- PREN 3545-002-1989 Aerospace Series Rectangular Electrical Connectors Sealed or Unsealed at the Back@ with Plastic Casing@ Locking Type@ for Operating Temperatures -55 Degrees Celsius to +175 Degrees Celsius Performance Specification and Configurations (Edition 2)
- PREN 3545-002-2002 Aerospace Series Rectangular Electrical Connectors Sealed or Unsealed at the Back@ with Plastic Casing@ Locking Type@ for Operating Temperatures -55 Degrees Celsius to +175 Degrees Celsius Performance Specification and Configurations (Edition P 3)
- PREN 3545-007-2002 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard (Edition P 2)
- PREN 3545-001-1995 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification (Edition P 1; Corrigendum 04/30/1995)
- PREN 3545-002-1998 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements (Edi
- PREN 3545-007-1995 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard (Edition P 1)
- PREN 3545-007-2004 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Device@ Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard (Edition P 3)
- PREN 3545-002-2004 Aerospace series Connectors@ electrical rectangular@ with sealed and non-sealed rear@ plastic housing@ locking device@ operating temperatures -55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of performance and contact arrangements (Editi
- PREN 3545-002-1995 Aerospace Series Connectors@ Electrical@ Rectangular@ with Sealed and Non-Sealed Rear@ Plastic Housing@ Locking Devices@ Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements (Ed
HU-MSZT, Densitometer work
VN-TCVN, Densitometer work
- TCVN 7365-2003 Air in workplace.Limit of concentration of dust and air pollutant for cement plants
Professional Standard-Safe Production, Densitometer work
- AQ/T 4268-2015 Method of rapid determination of dust concentration in the air of workplace.Light scattering method
Professional Standard - Aviation, Densitometer work
- HB 20094.3-2012 Test method for determination of wear metals in operating liquid for aviation.Part 3: Energy dispersion X-ray fluorescence spectrometry
- HB 20094.1-2012 Test method for determination of wear metals in operating liquid for aviation.Part 1: Rotating disc electrode atomic emission spectrometry
European Association of Aerospace Industries, Densitometer work
- AECMA PREN 3545-001-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 001: Technical specification Edition P 4
- AECMA PREN 3545-001-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 3
- AECMA PREN 3545-001-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 2
- AECMA PREN 3545-007-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 2
- AECMA PREN 3545-007-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 3
- AECMA PREN 3545-007-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 1
- AECMA PREN 3545-008-2005 Aerospace Series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 degrees C to 175 degrees C Part 008: Tools for assembly/removal of coding and attachment system Product st
- AECMA PREN 3545-002-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 002: Specification of performance and contact arrangements Edition P 5
- AECMA PREN 3545-002-1998 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements Edi
- AECMA PREN 3545-002-2004 Aerospace series Connectors, electrical rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of performance and contact arrangements Editi
- AECMA PREN 3545-002-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Devices, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements Ed
- AECMA PREN 3545-001-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 1; Corrigendum 04/30/1995
- AECMA PREN 3545-003-2004 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with female contacts Product standard Edition P 3
- AECMA PREN 3545-003-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with Female Contacts Product Standard Edition P 2
- AECMA PREN 3545-003-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with Female Contacts Product Standard Edition P 1
- AECMA PREN 3545-004-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts - Product Standard Edition P 3
- AECMA PREN 3545-004-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 2
- AECMA PREN 3545-004-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 1
- AECMA PREN 3545-009-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 009: Protective cover for plug and receptacle Product standard Edition P 1
- AECMA PREN 3545-005-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 005 : Female Coding and Attachment System for Mounting on Free Housing (Pl
- AECMA PREN 3545-006-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 006: Male Coding and Attachment System for Mounting on Fixed Housing (Rece
ZA-SANS, Densitometer work
- SANS 6164:1990 Determination of lead (inorganic and tetra-alkyl) in workplace air by atomic absorption spectrophotometry
国家市场监督管理总局、中国国家标准化管理委员会, Densitometer work
- GB/T 37052-2018 Test methods for nominal module operating temperature of building integrated photovoltaic(BIPV) modules
Aerospace, Security and Defence Industries Association of Europe (ASD), Densitometer work
- ASD-STAN PREN 3372-005-2005 Aeropsace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 005: Receptacle, Hermetic, Round Flange, Solder
- ASD-STAN PREN 2997-004-2005 Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, Fire-Resistant or Non Fire-Resistant, Operating Temperatures -65 Degrees C to 175 Degrees C Continuous, 200 Degrees C Continuous, 260 Degrees C Peak Part 004: Jam-Nut Mounted Rec
- ASD-STAN PREN 3372-002-2005 Aerospace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C and 200 Degrees C Continuous Part 002: Specification of Performance and Contact A
- ASD-STAN PREN 3372-001-2005 Aerospace series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 001: Technical Specification (Edition P 1)
International Electrotechnical Commission (IEC), Densitometer work
- IEC 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
European Committee for Electrotechnical Standardization（CENELEC）, Densitometer work
- EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
AENOR, Densitometer work
- UNE-EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
- UNE-EN 13032-3:2008 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places
Underwriters Laboratories (UL), Densitometer work
- UL 5703 BULLETIN-2007 OUTLINE OF INVESTIGATION FOR DETERMINATION OF THE MAXIMUM OPERATING TEMPERATURE RATING OF PHOTOVOLTAIC (PV) BACKSHEET MATERIALS
- UL SUBJECT 5703-2007 OUTLINE OF INVESTIGATION FOR DETERMINATION OF THE MAXIMUM OPERATING TEMPERATURE RATING OF PHOTOVOLTAIC (PV) BACKSHEET MATERIALS Issue Number: 1
American National Standards Institute （ANSI), Densitometer work
- ANSI CGATS.9-2007 Graphic Technology – Graphic Arts Transmission Densitometry Measurements – Terminology, Equations, Image Elements, and Procedures
- ANSI CGATS.4-2011 Graphic technology - Graphic arts reflection densitometry measurements - Terminology, equations, image elements and procedures
International Telecommunication Union (ITU), Densitometer work
- ITU-R S.524-8-2003 Maximum permissible levels of off-axis e.i.r.p. density from earth stations in geostationary-satellite orbit networks operating in the fixed-satellite service transmitting in the 6 GHz, 13 GHz, 14 GHz and 30 GHz frequency bands Questions ITU-R 70/4 and I
BELST, Densitometer work
- STB 8059-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Reference photometric filament lamps and working light sources. Methods of verification
KR-KS, Densitometer work
- KS I ISO 16740-2022 Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
ES-UNE, Densitometer work
- UNE-EN 13032-3:2022 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of workplaces
IN-BIS, Densitometer work
GOSTR, Densitometer work
- GOST R 58648.2-2019 Photovoltaic module. Performance testing and energy rating. Part 2. Determination of spectral sensitivity, characteristics dependence on the incidence angle and coefficients for calculating the operating temperature