ZH

RU

ES

electrical condition

electrical condition, Total:240 items.

In the international standard classification, electrical condition involves: Fluid storage devices, Protection against electric shock, Installations in buildings, Graphic technology, Internal combustion engines, Switchgear and controlgear, Electric road vehicles, Products of non-ferrous metals, Power transmission and distribution networks, Surface treatment and coating, Rotating machinery, Hand-held tools, Welding, brazing and soldering, Chipless working equipment, Shipbuilding and marine structures in general, Railway engineering in general, Construction of railways, Terminology (principles and coordination), Telecontrol. Telemetering, Protection against fire, Electrical accessories, Electrical engineering in general, Thermodynamics and temperature measurements, Industrial automation systems, Hydraulic energy engineering, Optics and optical measurements, Rectifiers. Convertors. Stabilized power supply, Special purpose vehicles, Motor cycles and mopeds, Road vehicle systems, Domestic electrical appliances in general, Laundry appliances, Telecommunication terminal equipment, Telecommunication systems, Kitchen equipment, Industrial furnaces, Geology. Meteorology. Hydrology, Galvanic cells and batteries, Office machines, Electrical wires and cables, Electricity. Magnetism. Electrical and magnetic measurements, Environmental protection, Components for electrical equipment, Insulating materials, Insulation, Pipeline components and pipelines, Lubricants, industrial oils and related products, Paper and board, Burners. Boilers, Lifting equipment, Industrial trucks, Agricultural machines, implements and equipment, Occupational safety. Industrial hygiene, Energy and heat transfer engineering in general, Test conditions and procedures in general, Machine tools, Wind turbine systems and other alternative sources of energy, Safety of machinery, Aerospace electric equipment and systems.


British Standards Institution (BSI), electrical condition

  • BS EN 13720:2002 Transportable gas cylinders - Filling conditions for acetylene battery vehicles
  • BS DD IEC/TS 61934:2011 Electrical insulating materials and systems. Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses

ZA-SANS, electrical condition

  • SANS 60900:2006 Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
  • SANS 1973-7:2008 Low-voltage switchgear and controlgear ASSEMBLIES Part 7: Requirements for testing under conditions of arcing due to internal fault

PL-PKN, electrical condition

  • PN E05002-1974 Choice of high voltage apparatus in regard of short - -circuit conditions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, electrical condition

European Committee for Standardization (CEN), electrical condition

  • HD 488 S1-1987 Gassing of insulating liquids under electrical stress and ionization

Korean Agency for Technology and Standards (KATS), electrical condition

  • KS C IEC 60332-3-22:2019 Tests on electric and optical fibre cables under fire conditions — Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables — Category A
  • KS C IEC 60332-3-25:2019 Tests on electric and optical fibre cables under fire conditions — Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables — Category D
  • KS C IEC 60332-1-3-2014(2019) Tests on electric and optical fibre cables under fire conditions — Part 1-3: Test for vertical flame propagation for a single insulated wire or cable — Procedure for determination of flaming droplets/
  • KS C IEC 62053-61-2003(2018) Electricity and metering equipment (a.c.) - Particular requirements Part 61 : Power consumption and voltage requirements

KR-KS, electrical condition

  • KS C IEC 60332-3-22-2019 Tests on electric and optical fibre cables under fire conditions — Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables — Category A
  • KS C IEC 60332-3-25-2019 Tests on electric and optical fibre cables under fire conditions — Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables — Category D

Professional Standard - Railway, electrical condition

  • TB/T 2417-1993 Technical conditions of power supply for railway bridge
  • TB/T 2947-1999 Technical conditions for train main line power supply
  • TB/T 1392-1993 Technical conditions of locomotive electropneumatic valve
  • TB/T 3206-2008 The technical specification of ZPW-2000 track circuit
  • TB/T 3206-2017 Technical conditions of ZPW-2000 track circuit
  • TB/T 2853-1997 25Hz phase sensitive track circuit technical conditions
  • TB/T 2275-1991 Railway Tunnel Lighting Facilities and Technical Conditions of Power Supply
  • TB/T 1681-1999 Specifications for locomotive overcurrent relay
  • TB/T 2751-1996 Technical conditions of brush plating electrolytic cleaning solution
  • TB/T 1117-1961 Technical conditions of signal electric lock
  • TB/T 2307-1992 Various combined circuit technical conditions for electrical appliances

Professional Standard - Machinery, electrical condition

  • JB/T 11016-2010 Printing machinery.Technology conditions of power wasting
  • JB/T 5140.1-1999 Technical specifications for magnetoes
  • JB/T 9238-1999 Specification for industrial thermocouple assemblies
  • JB/T 9362-1999 Specification for ion selective electrodes
  • JB/T 5798-1991 Specifications for Marine DC Motors
  • JB/T 9864.1-1999 Technical specifications for magneto breakers
  • JB/T 7596-1994 Technical specification for charging generator intended to be used in watercrafts
  • JB/T 7573-1994 General technical specifications for electrotechnical products intended to be intended to be used in plateau conditions
  • JB/T 5582-2014 Specification of industrial sheathed thermocouple assemblies
  • JB/T 12529-2015 Specifications for industrial Tungsten-Rhenium thermocouples
  • JB/T 3310-1996 Technical conditions for directional power relay
  • JB/T 2949-1981 Specification of industrial and mining electric locomotive pantograph
  • JB/T 10383-2002 Technical specification for electric contacts of rivet type
  • JB/T 7098-2002 Technical specification for copper-chromium electrial contact
  • JB/T 10741-2007 Specification of the primary charging roller for laser printer
  • JB/T 12218-2015 Technical conditions of permanent magnet ironless generator
  • JB/T 9445-2015 Specifications for eliminating corona brush of electrostatic copying machines
  • JB/T 12122-2015 Electric area technical conditions of electrostatic-fabric integrated precipitator
  • JB/T 9445-1999 Static duplicator de-electricity brush - Technical conditions
  • JB/T 6696-1993 Specification for power station boiler
  • JB/T 6127-1992 Technical specification for electric flat carriages
  • JB/T 6127-2010 Motorized flat truck.Technical specification
  • JB/T 1377.3-1999 Specification for S series motor
  • JB/T 5783-1991 Technical conditions for enclosed glow plugs
  • JB/T 10134-1999 Technical specifications for alternative generator with vaccum pump
  • JB/T 9578-1999 Technical requirements for rare-earth permanent magnetism synchronous generator
  • JB/T 3320.2-2000 Specification for small size single-phase synchronous generator
  • JB/T 11817-2014 Specification for small-scale single phase synchronous generators
  • JB/T 4271-2011 Specification for three-phase synchronous generator in ships

Professional Standard - Urban Construction, electrical condition

RU-GOST R, electrical condition

Professional Standard - Light Industry, electrical condition

  • QB/T 2122-1995 Electroplating technical conditions for baby carriages
  • QB/T 2002.1-1994 Specifications for electroplating coatings of leather hardware accessories
  • QB/T 2002.1-2018 Specifications for electroplating coatings of leather hardware accessories
  • QB/T 1217-1991 Technical conditions of bicycle electroplating
  • QB/T 1518-2018 Technical requirements for electrode holder
  • QB 1518-1992 Technical specification for electric welding pliers
  • QB/T 1572-1992 General specification for electroplating of sewing machine parts

Professional Standard - Aerospace, electrical condition

Professional Standard - Hydroelectric Power, electrical condition

  • SD 320-1989 Technical specifications for box-type substations
  • SD 284-1988 Technical specifications for static voltage relay
  • SD 283-1988 Technical specifications for static current relay
  • SD 279-1988 Technical specifications for static impedance relay
  • SD 285-1988 Technical specifications for static time relay
  • SD 278-1988 Technical specifications for static over-excitation relay
  • SD 277-1988 Technical specifications for static power direction relay

Professional Standard - Automobile, electrical condition

Professional Standard - Education, electrical condition

Jiangxi Provincial Standard of the People's Republic of China, electrical condition

Professional Standard-Ships, electrical condition

轻工业部, electrical condition

Group Standards of the People's Republic of China, electrical condition

机械电子工业部, electrical condition

NATO - North Atlantic Treaty Organization, electrical condition

  • AECTP-250-2009 Electrical and Electromagnetic Environmental Conditions (ED 1)
  • AECTP-250-2011 Electrical and Electromagnetic Environmental Conditions (ED 2)

Professional Standard - Traffic, electrical condition

  • JT/T 70.1-1993 Technical conditions for electrical equipment of port portal cranes Electrical control equipment
  • JT/T 70.2-1993 Port portal crane electrical equipment technical conditions collector

Professional Standard - Post and Telecommunication, electrical condition

  • YD/T 574-1997 Specifications for date stamps of post and telecommunication
  • YD/T 579-1997 The specifications for coin box telephone set

Professional Standard - Agriculture, electrical condition

  • NY/T 845-2004 General technical qualification of generator for micro-hydro power generating equipments

Chongqing Provincial Standard of the People's Republic of China, electrical condition

Professional Standard - Electricity, electrical condition

  • DL/T 1441-2015 Intelligent low-voltage distribution box technical conditions
  • DL/T 2034.2-2019 Technical conditions for connecting electric energy replacement equipment to the power grid Part 2: Electric boilers
  • DL/T 729-2000 On-line condition of indoor insulators.Electrical part
  • DL/T 2034.1~2034.3-2019 Technical conditions for electric energy replacement equipment to be connected to the grid
  • DL/T 2034.1~2034.3-2019 Technical conditions for electric energy replacement equipment to be connected to the grid

Military Standard of the People's Republic of China-General Armament Department, electrical condition

  • GJB 203-1986 Technical conditions of marine medium frequency generators
  • GJB 516-1988 Technical conditions of lead-acid batteries for military vehicles
  • GJB 355-1987 Technical specifications of DC propulsion motors for submarines

Henan Provincial Standard of the People's Republic of China, electrical condition

CZ-CSN, electrical condition

  • CSN 35 6521-1982 Electronic measuring instrumenta. Interface IMS-1. Logic and electric conditions informational, control and program signals
  • CSN 33 2310-1987 Rules for electrical equipment in distinct conditions

International Telecommunication Union (ITU), electrical condition

  • ITU-R INFORME 1012-1 SPANISH-1990 OPERATIONAL MODELLING OF HF RADIO PROPAGATION CONDITIONS AT HIGH LATITUDES MODELO OPERATIVO DE LAS CONDICIONES DE PROPAGACI覰 RADIOEL蒀TRICA EN LATITUDES ALTAS
  • ITU-R RAPPORT 1012-1 FRENCH-1990 OPERATIONAL MODELLING OF HF RADIO PROPAGATION CONDITIONS AT HIGH LATITUDES MOD蒐ISATION, POUR L'EXPLOITATION, DES CONDITIONS DE PROPAGATION DES ONDES D蒀AM蒚RIQUES AUX LATITUDES 蒐EV蒃S
  • ITU-R REPORT 1012-1-1990 OPERATIONAL MODELLING OF HF RADIO PROPAGATION CONDITIONS AT HIGH LATITUDES

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, electrical condition

  • REPORT 1012-1-1990 OPERATIONAL MODELLING OF HF RADIO PROPAGATION CONDITIONS AT HIGH LATITUDES

Professional Standard - Geology, electrical condition

  • DZ 0020.2-1991 General technical conditions of IP instrument Time domain IP instrument
  • DZ 0020.3-1991 General Technical Conditions of IP Instruments Frequency Domain IP Instruments
  • DZ 0031-1992 Technical conditions of DWJ-1A microcomputer-induced electric instrument

Professional Standard - Aviation, electrical condition

工业和信息化部/国家能源局, electrical condition

  • JB/T 12666-2016 Technical conditions for starting and stopping the use of lead-acid batteries
  • JB/T 10383-2017 Rivet type electrical contacts technical conditions

工业和信息化部, electrical condition

  • JB/T 10741-2018 Laser printer charging roller technical conditions
  • JB/T 13637-2020 Technical specifications of copper chromium tellurium electrical contacts

Professional Standard - Energy, electrical condition

国家能源局, electrical condition

  • NB/T 33002-2018 Specification for electric vehicle A.C charging point
  • NB/T 31100-2016 Technical conditions of electrically excited synchronous wind turbine

Professional Standard - Electron, electrical condition

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, electrical condition

Beijing Provincial Standard of the People's Republic of China, electrical condition

Association Francaise de Normalisation, electrical condition

  • NF C18-510:2012 Operations on electrical network and installations and in an electrical environment - Electrical risk prevention.

国家市场监督管理总局、中国国家标准化管理委员会, electrical condition

Professional Standard - Meteorology, electrical condition

  • QX/T 97-2008 Meteorological index grades of power requirement

Japanese Industrial Standards Committee (JISC), electrical condition

German Institute for Standardization, electrical condition

  • DIN 29834:1983 Aerospace; nickel-cadmium batteries; technical specification

RO-ASRO, electrical condition





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved