ZH

RU

ES

Principle of Viscosity Measurement

Principle of Viscosity Measurement, Total:497 items.

In the international standard classification, Principle of Viscosity Measurement involves: Measurement of volume, mass, density, viscosity, Glass, Crude petroleum, Non-metalliferous minerals, Thermodynamics and temperature measurements, Plastics, Linear and angular measurements, Construction materials, Raw materials for rubber and plastics, Testing of metals, Agricultural machines, implements and equipment, Petroleum products in general, Vocabularies, Adhesives, Metrology and measurement in general, Ceramics, Products of the textile industry, Test conditions and procedures in general, Acoustics and acoustic measurements, Nuclear energy engineering, Footwear, Products of the chemical industry, Energy and heat transfer engineering in general, Components for electrical equipment, Packaging materials and accessories, Paints and varnishes, Cereals, pulses and derived products, Lubricants, industrial oils and related products, Quality, Tobacco, tobacco products and related equipment, Analytical chemistry, Fuels, Construction industry, Soil quality. Pedology, Particle size analysis. Sieving, Bearings, Fluid power systems, Heat treatment, Optics and optical measurements, Internal combustion engines for road vehicles, Earthworks. Excavations. Foundation construction. Underground works, Wastes, Biology. Botany. Zoology, Sacks. Bags, Road engineering, Textile fibres, Leather technology, Aerospace engines and propulsion systems, Materials for the reinforcement of composites, Structure and structure elements, Technical drawings, Paint ingredients, Welding, brazing and soldering, Rubber, Air quality, Ferrous metals, Railway rolling stock, Physics. Chemistry, Non-ferrous metals, Refrigerating technology, Elements of buildings, Refractories, Waxes, bituminous materials and other petroleum products, Electrical engineering in general, Water quality, Insulating materials, Surface treatment and coating, Software development and system documentation, Piezoelectric and dielectric devices, Equipment for petroleum and natural gas industries, Radiation measurements, Electricity. Magnetism. Electrical and magnetic measurements, Electronic tubes, Metalliferous minerals.


German Institute for Standardization, Principle of Viscosity Measurement

  • DIN 53019-1:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
  • DIN 53019-1:2008-09 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
  • DIN ISO 7884-1:1998 Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points (ISO 7884-1:1987)
  • DIN 53018-1:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Principles
  • DIN 54270-1:1976-09 Testing of textiles; determination of the limit-viscosity of celluloses, principles
  • DIN 53015:2019-06 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
  • DIN 51562-1:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
  • DIN 53015:2019 Viscometry - Measurement of viscosity using the Hoeppler Falling-Ball Viscometer
  • DIN 53000-1:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure
  • DIN 51562-2:1988 Viscometry; determination of kinematic viscosity using the Ubbelohde microviscometer
  • DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
  • DIN 52007-1:2006 Bitumen and bituminous binders - Determination of viscosity - Part 1: General principles and evaluation
  • DIN 52007-1:2013 Bitumen and bituminous binders - Determination of viscosity - Part 1: General principles and evaluation
  • DIN 51562-4:1999 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement
  • DIN 53019-2:2001 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
  • DIN 51562-3:1985 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times
  • DIN 53019-3:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections
  • DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
  • DIN 51562-1 Berichtigung 1:2018 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure; Corrigendum 1
  • DIN 53014-1:1994 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions
  • DIN 53019-2:2001-02 Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement
  • DIN 53000-3:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 3: Calibration and determination of the uncertainty of measurement
  • DIN EN 12034:1996 Self adhesive tapes - Measurement of the length of a roll of adhesive tape; German version EN 12034:1996
  • DIN 53019-3:2008-09 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections
  • DIN 51562-3:1985-05 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times / Note: To be replaced by DIN 53000-4 (2019-04).
  • DIN EN 1942:2008-06 Self adhesive tapes - Measurement of Thickness; German version EN 1942:2008
  • DIN 53014-1:1994-02 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions / Note: To be replaced by DIN 53014-1 (2019-03).
  • DIN EN 12032:1996 Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing; German version EN 12032:1996
  • DIN EN 12033:1996 Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing; German version EN 12033:1996
  • DIN EN 12031:1996 Self adhesive tapes - Measurement of bursting strength; German version EN 12031:1996
  • DIN 53000-2:2023-07 Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 2: Sources of errors and corrections
  • DIN EN 14049:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods; English version of DIN EN 14049:2004 + A1:2005
  • DIN EN 14049:2006-01 Irrigation techniques - Water application intensity - Calculation principles and measurement methods; German version EN 14049:2003 + A1:2005
  • DIN 42026-2:1980-08 Permanent magnet segments; measuring principle
  • DIN 52007-2:2006 Bitumen and bituminous binders - Determination of viscosity - Part 2: Measurement by drawn-sphere viscometer
  • DIN EN 1942:2008 Self adhesive tapes - Measurement of Thickness; English version of DIN EN 1942:2008-06
  • DIN 45630-1:1971 Physical and subjective magnitudes of sound
  • DIN 53012:2003 Viscosimetry - Capillary viscosimetry of newtonian liquids - Sources of errors and corrections
  • DIN 42026-2:1980 Permanent magnet segments; measuring principle
  • DIN ISO 5725-1:1997 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
  • DIN 53018-2:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Sources of Errors and Corrections concerning Cylinder; Rotation Viscometers
  • DIN EN ISO 18335:2023-06 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO/DIS 18335:2023); German and English version prEN ISO 18335:2023 ...
  • DIN 51398:1983-07 Testing of lubricants; procedure for measurement of low temperature apparent viscosity by means of the Brookfield viscometer (liquid bath method)
  • DIN EN 12025:1996 Self adhesive tapes - Measurement of tear resistance by the pendulum; German version EN 12025:1996
  • DIN EN 12034:1996-07 Self adhesive tapes - Measurement of the length of a roll of adhesive tape; German version EN 12034:1996
  • DIN EN ISO 1628-1:2021-06 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021); German version EN ISO 1628-1:2021
  • DIN 66137-1:2003 Determination of solid state density - Part 1: Principles
  • DIN 66137-1:2019-03 Determination of solid state density - Part 1: Principles
  • DIN 52007-2:2013 Bitumen and bituminous binders - Determination of viscosity - Part 2: Measurement by drawn-sphere viscometer
  • DIN 53014-2:1994 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
  • DIN 4107-1:2011 Geotechnical measurements - Part 1: Principles
  • DIN 55571-2:2016 Hot-Tack - Part 2: Peel strength measuring devices
  • DIN 55571-2:2021-07 Hot-Tack - Part 2: Peel strength measuring devices
  • DIN 32877-1:2020-04 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 1: Basic principles and terms
  • DIN 51810:1999 Testing of lubricants - Determination of apparent viscosity of lubricating greases by rotational viscosimeter - System cone and plate
  • DIN 51366:2013-12 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
  • DIN 54270-1:1976 Testing of textiles; determination of the limit-viscosity of celluloses, principles
  • DIN 32877-1:2020 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 1: Basic principles and terms
  • DIN EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91) English version of DIN EN 14257:2006-09
  • DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
  • DIN 53177:2002 Binders for paints and varnishes - Measurement of the dynamic viscosity of liquid resins; Resin solutions and oils by the capillary viscosimeter of isocelses type according to Ubbelohde
  • DIN 51366:1977 Testing of mineral oil hydrocarbons; measurement of kinematic viscosity by means of the Cannon-Fenske viscometer, for opaque liquids
  • DIN 51366:2013 Testing of mineral oil hydrocarbons - Measurement of kinematic viscosity by means of the Cannon-Fenske viscometer for opaque liquids
  • DIN EN 29658:1992 Determination of aluminium content of steel by flame atomic absorption spectrometry (ISO 9658:1990); german version EN 29658:1991
  • DIN EN ISO 18335:2023 Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO/DIS 18335:2023); German and English version prEN ISO 18335:2023
  • DIN 25043-1:2012 Railway applications - Measuring of new railway vehicles - Part 1: Measuring principles
  • DIN 25043-1:2012-02 Railway applications - Measuring of new railway vehicles - Part 1: Measuring principles / Note: Under certain conditions, DIN 25043-1 (1992-07) remains valid alongside this standard until 2016-02-01.*A transition period, as set out in DIN 25043-2 (2012...
  • DIN EN 14410:2003-06 Self adhesive tapes - Measurement of breaking strength and elongation at break; German version EN 14410:2003
  • DIN EN ISO 29864:2019-09 Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018); German version EN ISO 29864:2019
  • DIN 32877-2:2021 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
  • DIN 32877-2:2021-07 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
  • DIN SPEC 52022:2014 Bitumen and bituminous binders - Determination of fixation strength of polymer modified binders for surface treatments
  • DIN V 52022:2005 Bitumen and bituminous binders - Determination of fixation strength of polymer modified binders for surface treatments
  • DIN EN 13775-1:2004-09 Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles; German version EN 13775-1:2003
  • DIN EN ISO 2884-1:2023-09 Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates (ISO/DIS 2884-1:2023); German and English version prEN ISO 2884-1:2023 / Note...
  • DIN 53177:2002-11 Binders for paints and varnishes - Measurement of the dynamic viscosity of liquid resins; Resin solutions and oils by the capillary viscosimeter of isocelses type according to Ubbelohde
  • DIN 50460:1988-08 Determination of magnetic properties of soft magnetic materials; general, terminology and principles of measurement
  • DIN 25457-1:1993 Activity measurement methods for the release of radioactive residual materials and decommissioning components of nuclear facilities; principles for beta and gamma radiation measurements

YU-JUS, Principle of Viscosity Measurement

  • JUS B.E8.300-1989 Glass. Viscosity and viscometric fixed points. Principies for detarmining viscosity and viscometric fixed points
  • JUS U.M8.052-1997 Fresh concrete - Determination of consistency - Flow test
  • JUS G.S2.022-1986 Leather. Physical testing. Measurement of thickness

RO-ASRO, Principle of Viscosity Measurement

  • STAS SR ISO 7884-1:1995 Glass - Viscozity and viscometric fixed points Part 1: Principles for determining viscosity and viscometric fixed
  • STAS 11071/9-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR VISCOSITY OF NEWTONIAN LIQUIDS
  • STAS 11496-1981 MINERAL OILS FOR MOTOR VEHICLES TRANSMISSION GEAR Determination of apparent viscosity at low temperatures -with Brook field viscosimeter

CZ-CSN, Principle of Viscosity Measurement

  • CSN ISO 7884-1:1992 Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points
  • CSN ISO 2589:1994 Leather.Physical testing.Measurement of thickness
  • CSN 42 0640 Cast.5-1982 Nickel. Determination of iron by the photometric method and atomic abserption method
  • CSN 42 0691 Cast.1-1985 Chemical analysis of non-ferrous metals and alloys. Titanium. Determination of iron by the photometric method and atomic absorption method
  • CSN 42 0680 Cast.3-1986 Chemical analysis of non-ferrous metals and alloys. Tin. Determination of iron by the photometric method and atomic absorption method
  • CSN 42 0645 Cast.3-1987 Chemical analysis of non-ferrous metals and alloys. Antimony. Determination of iron by the photometric method and atomic absorption method
  • CSN 42 0680 Cast.2-1986 Chemical analysis of non-ferrous metals and alloys. Tin. Determination of bismuth by the photometric method and atomic absorption method
  • CSN 42 0680 Cast.6-1986 Chemical analysis of non-ferrous metals and alloys. Tin. Determination of antimony by the photometric method and atomic absorption method
  • CSN 42 0645 Cast.7-1987 Chemical analysis of non-ferrous metals and alloys. Antimony. Determination of bismuth by the photometric method and atomic absorption method
  • CSN 75 7400-1998 Water quality - Determination of silver by atomic absorption spectrometric methods
  • CSN 42 0622 Cast.17-1981 Bronzes. Determination of antimony by the photometric and atomic absorption method
  • CSN 42 0620 Cast.11-1981 Brasses. Determination of antimony by the photometric method and atomic absorption method
  • CSN 42 0622 Cast.15-1981 Bronzes. Determination of bismuth by the photometric method and atomic absorption method
  • CSN 42 0620 Cast.12-1981 Brasses. Determination of bismuth by the photometric raethods and atomic absorption method
  • CSN EN 29658-1994 Steel - Determination of aluminium content - Flame atomic spectrometric method
  • CSN 44 1777-1988 Lead concentrates. Determination of nickel content
  • CSN 44 1774-1988 Lead concentrates. Determination of cobalt content
  • CSN 42 0622 Cast.10-1981 Bronzes. Determination o? nickel by the gravimetric method, atomic absorption method and photometric method

International Organization for Standardization (ISO), Principle of Viscosity Measurement

  • ISO 7884-1:1987 Glass; Viscosity and viscometric fixed points; Part 1 : Principles for determining viscosity and viscometric fixed points
  • ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
  • ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
  • ISO 23131:2021 Ellipsometry — Principles
  • ISO/FDIS 18335:2023 Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer
  • ISO/DIS 2884-1:2023 Paints and varnishes — Determination of viscosity using rotational viscometers — Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates
  • ISO 1628-1:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 1: General principles
  • ISO/CD 1628-1:2004 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
  • ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
  • ISO/DIS 2884-2:2023 Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds
  • ISO 9512:2019 Cigarettes — Determination of ventilation — Definitions and measurement principles
  • ISO 23539:2005 Photometry - The CIE system of physical photometry
  • ISO 9512:2002 Cigarettes - Determination of ventilation - Definitions and measurement principles
  • ISO 9512:1993 Cigarettes; determination of ventilation; definitions and measurement principles
  • ISO 2589:1972 | IULTCS Leather — Physical testing — Measurement of thickness
  • ISO 9110-1:2020 Hydraulic fluid power — Measurement techniques — Part 1: General measurement principles
  • ISO 19613:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement of viscosity of ceramic slurry by use of a rotational viscometer
  • ISO 29864:2007 Self adhesive tapes - Measurement of breaking strength and elongation at break
  • ISO 29864:2018 Self adhesive tapes - Measurement of breaking strength and elongation at break
  • ISO 18669-2:2020 Internal combustion engines — Piston pins — Part 2: Inspection measuring principles
  • ISO 6621-2:2020 Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
  • ISO/IEC TR 25021:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Quality measure elements

Korean Agency for Technology and Standards (KATS), Principle of Viscosity Measurement

  • KS L ISO 7884-1-2003(2018) Glass-Viscosity and viscometric fixed points-Part 1:Principles for determining viscosity and viscometric fixed points
  • KS M ISO 1652:2010 Rubber latex-Determination of viscosity
  • KS M ISO 1652:2015 Rubber latex-Determination of viscosity
  • KS M ISO 1628-1:2012 Plastics-Determination of the viscosity of polymers in dilute solution using capillary viscometers-Part 1:General principles
  • KS A 0531-2016(2021) Viscosity of liquid-Methods of measurement
  • KS A 0531-2016 Viscosity of liquid-Methods of measurement
  • KS M 2014-2004(2014) Testing methods for kinematic viscosity and calculating method for viscosity index of crude oil and petroleum products
  • KS H ISO 9512-2013(2018) Cigarettes-Determination of ventilation-Definitions and measurement principles
  • KS F 2345-2004 Testing method for relative density of cohesionless soils
  • KS M 1071-10-2007 Guide for determination of the viscosity of liquids of chemical substances
  • KS M 2450-2007 Test method for low-temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
  • KS M 2013-2007(2017) Testing method for saybolt viscosity of crude oils and petroleum products
  • KS A ISO 5725-1-2012(2017) Accuracy(trueness and precision) of measurement methods and results-Part 1:General principles and definitions
  • KS H ISO 9512:2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
  • KS R 1122-2014 Measuring principles relating to piston ring of internal combustionengine for automobiles
  • KS B ISO 9110-1-2006(2011) Hydraulic fluid power-Measurement techniques-Part 1:General measurement principles
  • KS H ISO 9512:2008 Cigarettes-Determination of ventilation-Definitions and measurement principles
  • KS H ISO 9512:2013 Cigarettes-Determination of ventilation-Definitions and measurement principles
  • KS F 2760-2018 Standard test method for the slant shear strength of structural bonding agents of concrete structures
  • KS F 2760-2023 Standard test method for the slant shear strength of structural bonding agents of concrete structures
  • KS M 2450-2007(2017) Test method for low-temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
  • KS R 1122-1999(2009) Measuring principles relating to piston ring of internal combustionengine for automobiles
  • KS M ISO 29864:2014 Self adhesive tapes — Measurement of breaking strength and elongation at break
  • KS M ISO 29864-2014(2019) Self adhesive tapes — Measurement of breaking strength and elongation at break
  • KS D ISO 11652:2002 Steel and iron-Determination of cobalt content-Flame atomic absorption spectrometric method
  • KS R ISO 6621-2:2019 Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
  • KS R ISO 18669-2-2015(2020) Internal combustion engines — Piston pins — Part 2: Inspection measuring principles
  • KS A ISO 5725-1:2012 Accuracy(trueness and precision) of measurement methods and results-Part 1:General principles and definitions

International Commission on Illumination (CIE), Principle of Viscosity Measurement

Professional Standard - Petroleum, Principle of Viscosity Measurement

  • SY/T 0520-2008 Viscosity determination of crude petroleum.Equilibrium method by rotational viscometer
  • SY/T 0520-1993 Determination of Viscosity of Crude Oil by Rotational Viscometer Equilibrium Method
  • SY/T 7547-1996 Measurement of crude oil yield value.Rotovisco method
  • SY/T 0522-2008 Determination of wax appearance temperature in crude petroleum.Test method by rotational viscometer
  • SY 7547-2014 Rotational Viscometer Method for Determination of Yield Value of Crude Oil
  • SY/T 0522-1993 Determination of wax precipitation point of crude oil by rotational viscometer method
  • SY/T 7547-2014 Determination of crude oil yield value by rotational viscometer
  • SY 0522-2008 Rotational Viscometer Method for Determination of Wax Precipitation Point of Annual Crude Oil
  • SY/T 6316-1997 Analytical approach of fluid physical property for heavy-oil reservoirs.Crude oil viscosity measurements

HU-MSZT, Principle of Viscosity Measurement

RU-GOST R, Principle of Viscosity Measurement

  • GOST 21216.4-1993 Clay raw materials. Method for determination of coarse-grained inclusions
  • GOST 21216.2-1993 Clay raw materials. Method for determination of finely dispersed fractions
  • GOST 7163-1984 Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
  • GOST 21216.3-1993 Clay raw materials. Method for determination of free silicon dioxide
  • GOST 25796.3-1983 Raw clay in the production of clay powders for drilling muds. Method of determination of mass fraction of sand
  • GOST 21216.6-1993 Clay raw materials. Method for determination of calcium and magnesium in water extract
  • GOST 21216.7-1993 Clay raw materials. Method for determination of chlorine ions in water extract
  • GOST 21216.8-1993 Clay raw materials. Method for determination of sulphate ions in water extract
  • GOST R 8.596-2002 State system for ensuring the uniformity of measurements. Metrological assurance for measuring systems. Main principles
  • GOST 8.025-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring viscosity of liquids
  • GOST 8.025-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring kinematic viscosity of liquid
  • GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles

Association of German Mechanical Engineers, Principle of Viscosity Measurement

British Standards Institution (BSI), Principle of Viscosity Measurement

  • BS EN ISO 1628-1:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - General principles
  • BS EN 14049:2003(2011) Water application intensity - Calculation principles and measurement methods
  • BS EN 14049:2003 Water application intensity - Calculation principles and measurement methods
  • BS EN 1942:2003 Self adhesive tapes - Measurement of thickness
  • BS EN 1942:2008 Self adhesive tapes — Measurement of thickness
  • BS EN 12034:1997 Self-adhesive tapes - Measurement of the length of a roll of adhesive tape
  • BS EN ISO 105-J01:2000 Textiles - Tests for colour fastness - General principles for measurement of surface colour
  • BS EN 1944:1996 Self adhesive tapes - Measurement of unwind adhesion at low speed
  • BS EN 12031:1997 Self-adhesive tapes - Measurement of bursting strength
  • BS 5131-1.9:1985 Methods of test for footwear and footwear materials - Adhesives - Measurement of green strength of adhesive joints
  • BS EN 12032:1997 Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing
  • BS EN 12033:1997 Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing
  • BS 5131 Sec.1.9:1985 Methods of test for footwear and footwear materials. Adhesives. Measurement of green strength of adhesive joints
  • BS EN 1940:1996 Self adhesive tapes - Measurement of breaking strength
  • PD IEC TR 61340-1:2012+A1:2020 Electrostatics. Electrostatic phenomena. Principles and measurements
  • BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
  • BS ISO 9110-1:2020 Hydraulic fluid power. Measurement techniques - General measurement principles
  • BS ISO 23539:2006 Photometry - The CIE system of physical photometry
  • BS ISO 18669-2:2005 Internal combustion engines - Pistons pins - Inspection measuring principles
  • BS ISO 18669-2:2020 Tracked Changes. Internal combustion engines. Piston pins. Inspection measuring principles
  • BS ISO 9512:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles
  • 20/30406580 DC BS EN ISO 1628-1. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Part 1. General principles
  • BS EN 12026:1997 Self adhesive tapes - Measurement of the unwinding force at high speed
  • BS EN 12028:1997 Self adhesive tapes - Measurement of elongation under static load
  • BS EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles
  • BS ISO 19613:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of viscosity of ceramic slurry by use of a rotational viscometer
  • BS EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
  • BS ISO 5725-1:1995 Accuracy (trueness and precision) of measurement methods and results. General principles and definitions
  • BS EN 205:2003 Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
  • PD IEC/TS 62758:2012 Calibration of space charge measuring equipment based on the pulsed electroacoustic (PEA) measurement principle
  • BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
  • PD ISO/TR 14294:2011 Workplace atmospheres. Measurement of dermal Exposure. Principles and methods

CL-INN, Principle of Viscosity Measurement

Association Francaise de Normalisation, Principle of Viscosity Measurement

  • NF EN 14049:2004 Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
  • NF U51-470*NF EN 14049:2004 Water application intensity - Calculation principles and measurement methods
  • NF T51-061-1*NF EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles
  • NF EN ISO 1628-1:2021 Plastiques - Détermination de la viscosité des polymères en solution diluée à l'aide de viscosimètres à capillaires - Partie 1 : principes généraux
  • NF EN 1942:2008 Rubans auto-adhésifs - Mesure de l'épaisseur
  • NF X41-048*NF EN 12034:1996 Self adhesive tapes. Measurement of the length of a roll of adhesive tape.
  • NF X41-026*NF EN 1942:2008 Self adhesive tapes - Measurement of thickness
  • NF T45-012:1973 Raw materials for the elastomer industry. Petroleum plasticisers. Determination of density-viscosity.
  • NF U51-470/A1*NF EN 14049/A1:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • NF EN 14049/A1:2006 Techniques d'irrigation - Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
  • NF EN ISO 2064:2000 Revêtements métalliques et autres revêtements inorganiques - Définitions et principes concernant le mesurage de l'épaisseur
  • NF V03-710*NF EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph
  • NF V37-025*NF ISO 9512:2019 Cigarettes - Determination of ventilation - Definitions and measurement principles
  • NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
  • NF EN 12034:1996 Rubans auto-adhésifs - Mesure de la longueur d'un rouleau de ruban adhésif
  • NF EN ISO 29863:2019 Rubans auto-adhésifs - Mesurage de la résistance au cisaillement statique
  • NF EN 12033:1996 Rubans auto-adhésifs - Mesure de la séparation de la liaison des rubans thermodurcissables après le traitement thermique
  • NF P85-527:2003 Sealants - Determination of adhesive and cohesive force by endurance tensile strength after thermal treatment
  • NF T30-029:1980 Paints. Method of use a rotational viscosimeter for measuring the apparent dynamic viscosity of varnishes, paints and similar preparations.
  • NF EN 12032:1996 Rubans auto-adhésifs - Mesure de la liaison des rubans thermodurcissables pendant le traitement thermique
  • NF V37-025:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles.
  • NF V37-025:1993 Cigarettes. Determination of ventilation. Definitions and measurment principles.
  • NF ISO 9512:2019 Cigarettes - Détermination du taux de ventilation - Définitions et principes de mesurage
  • NF EN ISO 3868:1995 Revêtements métalliques et autres revêtements non organiques - Mesurage de l'épaisseur - Méthode basée sur le principe de Fizeau d'interférométrie à faisceaux multiples.
  • NF T76-052:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91).
  • NF X41-050:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break.
  • FD X07-023:2012 Metrology - Evaluation of measurement uncertainty using Monte-Carlo simulations - Principles and application of the Supplement 1 to the GUM
  • NF T51-061-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1 : general principles.
  • NF T76-400*NF EN 1719:1999 Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure sensitive adhesives. Determination of loop tack.
  • NF X44-051:1978 Dépoussiéreurs - Classification et principes de mesure de leurs caractéristiques
  • NF EN ISO 29864:2019 Rubans auto-adhésifs - Mesurage de la résistance à la rupture et de l'allongement à la rupture
  • NF T90-139*NF EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
  • NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
  • NF EN 16345:2012 Bitumes et liants bitumineux - Mesure du temps d'écoulement des émulsions bitumineuses avec le Viscosimètre Redwood No. II
  • FD ISO/TR 14294:2011 Air des lieux de travail - Mesurage de l'exposition cutanée - Principes et méthodes
  • NF EN 13775-1:2004 Applications ferroviaires - Mesure des wagons lors de leur construction et lors de modifications - Partie 1 : principes de mesure

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of Viscosity Measurement

  • GB/T 10247-2008 Methods of viscosity measurement
  • GB/T 5547-1985 Resin finishing agent--Determination of the viscosity
  • GB 5547-1985 Resin finishing agent-Determination of the viscosity
  • GB/T 12005.10-1992 Determination for molecular weight of polyacrylamide by viscometry
  • GB/T 30825-2014 Pyrometry for heat treatment
  • GB/T 19610-2004 Cigarettes-Determination of ventilation-Definitions and measurement principles
  • GB/T 13354-1992 Test method for density of adhesives in fluid from.Method of weight cup
  • GB/T 26930.11-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 11:Determination of dynamic viscosity
  • GB/T 11186.1-1989 Methods for measuring the colour of paint films--Part 1:Principles
  • GB 11186.1-1989 The measurement method of the color of the coating film, the first part of the principle
  • GB/T 6900.8-1986 Fireclay and high-alumina refractories--Determination of calcium oxide and magnesium oxide content--Atomic absorption spectrophotometric method
  • GB/T 6900.9-1986 Fireclay and high-alumina refractories--Determination of potassium oxide and sodium oxide content--Atomic absorption spectrophotometric method
  • GB 6900.8-1986 Clay, high alumina refractories chemical analysis methods atomic absorption spectrophotometry determination of calcium oxide, magnesium oxide content
  • GB 6900.9-1986 Clay, high alumina refractories chemical analysis methods atomic absorption spectrophotometry determination of potassium oxide, sodium oxide content
  • GB/T 23144-2008 Paper and board.Determination of bending stiffness by static methods.General principle
  • GB/T 2129-1980 Determination of lead content in cadmium--Atomic absorption spectrophotometric method
  • GB/T 2131-1980 Determination of zinc content in cadmium--Atomic absorption spectrophotometric method
  • GB/T 17282-2012 Test method for estimation of mean relative molecular mass of petroleum oils from viscosity measurements

VN-TCVN, Principle of Viscosity Measurement

  • TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments
  • TCVN 7724-2007 Water quality.Determination of merdury.Method using atomic fluorescence spectrometry

Danish Standards Foundation, Principle of Viscosity Measurement

  • DS/EN 14049:2004 Water application intensity - Calculation principles and measurement methods
  • DS/EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
  • DS/EN 1942:2008 Self adhesive tapes - Measurement of Thickness
  • DS/EN 14049/A1:2005 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • DS/EN 12031:1997 Self-adhesive tapes - Measurement of bursting strength
  • DS/EN 12034:1997 Self-adhesive tapes - Measurement of the length of a roll of adhesive tape
  • DS/EN ISO 1628-1/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1
  • DS/EN ISO 1628-1:2021 Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles (ISO 1628-1:2021)
  • DS/EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
  • DS/IEC/TS 62758:2012 Calibration of space charge measuring equipment based on the pulsed electro-acoustic (PEA) measurement principle
  • DS/EN 13775-1:2003 Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles

Lithuanian Standards Office , Principle of Viscosity Measurement

  • LST EN 14049-2004 Water application intensity - Calculation principles and measurement methods
  • LST EN 1942-2008 Self adhesive tapes - Measurement of Thickness
  • LST EN 14049-2004/A1-2005 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • LST EN 12031-2000 Self-adhesive tapes - Measurement of bursting strength
  • LST EN 12034-2000 Self-adhesive tapes - Measurement of the length of a roll of adhesive tape
  • LST EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
  • LST EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
  • LST EN 14410-2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
  • LST EN ISO 1628-1:2009/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd.1:2012)
  • LST EN 13775-1-2004 Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles
  • LST EN 60450-2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004)

AENOR, Principle of Viscosity Measurement

  • UNE-EN 14049:2005 Water application intensity - Calculation principles and measurement methods
  • UNE-EN 1942:2008 Self adhesive tapes - Measurement of Thickness
  • UNE-EN 14049:2005/1M:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • UNE-EN 12031:1996 SELF ADHESIVE TAPES. MEASUREMENT OF BURSTING STRENGTH.
  • UNE-EN 12034:1996 SELF ADHESIVE TAPES. MEASUREMENT OF THE LEGTH OF A ROLL OF ADHESIVE TAPE.
  • UNE 84043:2003 Cosmetic raw materials. Sodium carboxymethycellulose. Viscosity determination of aqueous solutions.
  • UNE-EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
  • UNE-EN 12024:1996 SELF ADHESIVE TAPES. MEASUREMENT OF RESISTANCE TO ELEVATED TEMPERATURE AND HUMIDITY.
  • UNE-EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
  • UNE-EN ISO 1628-1:2009/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd 1:2012)
  • UNE-EN 13775-1:2004 Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles

Japanese Industrial Standards Committee (JISC), Principle of Viscosity Measurement

  • JIS K 2283:1993 Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
  • JIS K 7367-1:2002 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles
  • JIS K 2283:2000 Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
  • JIS Z 8803:2011 Methods for viscosity measurement of liquid
  • JIS R 1652:2003 Method for measurement of viscosity with a rotational viscometer of ceramics slurry
  • JIS K 6848-2:1999 Adhesives -- Testing methods of bonding strength of adhesives -- Part 2: Guidelines for the surface preparation of metals
  • JIS K 6848-3:1999 Adhesives -- Testing methods of bonding strength of adhesives -- Part 3: Guidelines for the surface preparation of plastics
  • JIS K 6300-1:2001 Rubber, unvulcanized -- Physical property -- Part 1: Determination of Mooney viscosity and pre-vulcanization characteristics with Mooney viscometer
  • JIS K 6300-1:2013 Rubber, unvulcanized.Physical property.Part 1: Determination of Mooney viscosity and pre-vulcanization characteristics with Mooney viscometer
  • JIS R 1665:2005 Method for measurement of thixotropy behavior with a rotational viscometer of ceramics slurry
  • JIS Z 8402-1:1999 Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Principle of Viscosity Measurement

  • ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)
  • ASHRAE 4342-2000 Measurement of Solubility@ Viscosity@ and Density of R-410A Refrigerant/Lubricant Mixtures (RP-928)

IT-UNI, Principle of Viscosity Measurement

  • UNI EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles

European Committee for Standardization (CEN), Principle of Viscosity Measurement

  • EN ISO 23131:2022 Ellipsometry - Principles (ISO 23131:2021)
  • EN ISO 1628-1:1998 Plastics - Determination of the Viscosity of Polymers in Dilute Solution Using Capillary Viscometers - Part 1: General Principles ISO 1628-1:1998
  • EN 1942:2008 Self adhesive tapes - Measurement of Thickness
  • EN 1942:1996 Self Adhesive Tapes - Measurement of Thickness
  • EN 1942:2003 Self Adhesive Tapes - Measurement of Thickness
  • EN 12033:1996 Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing
  • EN 1940:1996 Self Adhesive Tapes - Measurement of Breaking Strength
  • EN 12031:1996 Self adhesive tapes - Measurement of bursting strength
  • EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
  • EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
  • EN 14049:2003 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • EN 12034:1996 Self adhesive tapes - Measurement of the length of a roll of adhesive tape
  • EN 1941:1996 Self Adhesive Tapes - Measurement of Elongation at Break
  • EN 12025:1996 Self adhesive tapes - Measurement of tear resistance by the pendulum
  • EN 12028:1996 Self adhesive tapes - Measurement of elongation and static load
  • EN 1944:1996 Self adhesive tapes - Measurement of unwind adhesion at low speed
  • EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
  • EN 205:2016 Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints

IET - Institution of Engineering and Technology, Principle of Viscosity Measurement

American Society for Testing and Materials (ASTM), Principle of Viscosity Measurement

  • ASTM E3116-23 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
  • ASTM E3116-18 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
  • ASTM C1514-08(2017) Standard Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle
  • ASTM C1514-02 Standard Test Method for Measurement of 235U Fraction using the Enrichment Meter Principle
  • ASTM D5225-98 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D5225-98(2003) Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D2983-09 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D2983-15 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D5225-17 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D5225-09 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D4878-08 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
  • ASTM C1276-94(1999) Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
  • ASTM D5225-14 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D8185-18 Standard Guide for In-Service Lubricant Viscosity Measurement
  • ASTM D6616-20 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
  • ASTM D6616-20a Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
  • ASTM D6616-21 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 ��C
  • ASTM D562-10(2018) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • ASTM D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
  • ASTM D1986-91(2007) Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
  • ASTM D1986-91(2002) Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
  • ASTM D7741/D7741M-11(2017) Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer
  • ASTM D7741/D7741M-18 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer
  • ASTM D2983-01 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D2983-87(1993) Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D562-01 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • ASTM D562-81(1997)e1 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Visosity Using a Stormer-Type Viscometer
  • ASTM D4741-06 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D562-01(2005) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • ASTM D4741-00 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-96 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-12 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-13 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D562-10(2023) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • ASTM D4889-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
  • ASTM D4741-21 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-18 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-20a Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-20 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4741-17 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D562-10(2014) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • ASTM D1092-99 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • ASTM D1092-05 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • ASTM D1092-18 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • ASTM D1092-19 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • ASTM D1092-20 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • ASTM F692-97(2002) Standard Test Method for Measuring Adhesion Strength of Solderable Films to Substrates
  • ASTM D1092-12 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • ASTM D1092-12(2017) Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • ASTM D1092-11 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • ASTM D6616-01 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100deg;C
  • ASTM D6616-07(2012) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100deg;C
  • ASTM D7998-15 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
  • ASTM D6616-17 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100&x2009;&xb0;C
  • ASTM D5481-04 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D6616-01a(2006) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100176;C
  • ASTM C1072-19 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
  • ASTM C1072-12 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
  • ASTM C1072-22 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
  • ASTM C1072-13e1 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
  • ASTM D1986-13 Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
  • ASTM C1072-11 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
  • ASTM C1072-13 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
  • ASTM D4878-03 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
  • ASTM D6616-07 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100x00B0;C
  • ASTM D5618-94 Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
  • ASTM C965-23 Standard Practice for Measuring Viscosity of Glass Above the Softening Point
  • ASTM D5618-20 Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
  • ASTM D1986-91(2012) Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
  • ASTM D1986-14 Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
  • ASTM D6616-01a Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100°C
  • ASTM D4878-98 Standard Test Methods for Polyurethane Raw Materials Determination of Viscosity of Polyols
  • ASTM D4878-15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
  • ASTM C1404/C1404M-98 Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
  • ASTM D7741-11 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer
  • ASTM D3983-98(2019) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
  • ASTM D4889-98 Standard Test Methods for Polyurethane Raw Materials Determination of Viscosity of Crude or Modified Isocyanates
  • ASTM D4889-21 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

Society of Automotive Engineers (SAE), Principle of Viscosity Measurement

  • SAE ARP6157A-2020 Pressure-Viscosity Coefficient Measurement
  • SAE AS9968A-2021 Laboratory Viscosity Measurement of Thickened Aircraft Deicing/Anti-icing Fluids with a Viscometer
  • SAE J1589-1992 Internal Combustion Engines - Piston Rings - Inspection Measuring Principles
  • SAE AS9968-2014 Laboratory Viscosity Measurement of Thickenend Aircraft Deicing/Anti-icing Fluids with the Brookfield LV Viscometer

American National Standards Institute (ANSI), Principle of Viscosity Measurement

  • ANSI/ASTM D4878:1998 Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols (08.03)
  • ANSI/ASTM D5225:1998 Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer (08.03)
  • ANSI/ASTM D4889:1998 Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates (08.03)
  • ANSI/ASME Y14.43-2011 Dimensioning and Tolerancing Principles for Gages and Fixtures

SAE - SAE International, Principle of Viscosity Measurement

GB-REG, Principle of Viscosity Measurement

Group Standards of the People's Republic of China, Principle of Viscosity Measurement

  • T/BSPT 003-2018 Performance test method for fine particulate matter (PM2.5 )mass concentration measurement instruments based on light scattering principle
  • T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter (PM2.5)mass concentration measurement instruments based on light scattering principle
  • T/CAB 0063-2020 Detection method of Type Ⅲ collagen promoting cell adhesion Spectrophotometry
  • T/CSTM 00003-2019 Thickness measurements of two-dimensional materials Atomic force microscopy (AFM)

GM Daewoo, Principle of Viscosity Measurement

  • GMKOREA EDS-T-7786-2012 Measurement Method to Density of Adhesives ???? ?? ?? ?? Version 5; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by ASTM D1475 [Replaced: GMKOREA EDS-T-7786]

未注明发布机构, Principle of Viscosity Measurement

  • BS 5131-1.9:1985(1999) Methods of Test for footwear and footwear materials — Part 1 : Adhesives — Section 1.9 Measurement of green strength of adhesive joints
  • BS EN ISO 29864:2019 Self adhesive tapes - Measurement of breaking strength and elongation at break
  • BS ISO 29864:2018 Self adhesive tapes — Measurement of breaking strength and elongation at break

Standard Association of Australia (SAA), Principle of Viscosity Measurement

  • AS/NZS 1580.214.1:1997 Paints and related materials - Methods of test - Consistency - Stormer viscometer
  • AS 2313.2.6:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Determining the thickness of release liner
  • AS 4250.1:1995 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - General principles

International Telecommunication Union (ITU), Principle of Viscosity Measurement

ES-UNE, Principle of Viscosity Measurement

  • UNE-EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
  • UNE-EN ISO 29864:2020 Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018)

Professional Standard - Petrochemical Industry, Principle of Viscosity Measurement

  • SH/T 0730-2004 Estimation of molecular weigh (relative molecular mass) of petroleum oils from viscosity measurements

TIA - Telecommunications Industry Association, Principle of Viscosity Measurement

CO-ICONTEC, Principle of Viscosity Measurement

GM North America, Principle of Viscosity Measurement

Institute of Electrical and Electronics Engineers (IEEE), Principle of Viscosity Measurement

  • IEEE Std 119-1974 IEEE Recommended Practice for General Principles of Temperature Measurement as Applied to Electrical Apparatus

Professional Standard - Tobacco, Principle of Viscosity Measurement

  • YC/T 158-2002 Cigarettes----Determination of ventilation----Definitions and measurement principles

KR-KS, Principle of Viscosity Measurement

  • KS H ISO 9512-2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
  • KS M 2450-2007(2017)(英文版) Test method for low-temperature viscosity of automotive fluid lubricants measured by brookfield viscometer
  • KS R ISO 6621-2-2019 Internal combustion engines — Piston rings — Part 2: Inspection measuring principles

PL-PKN, Principle of Viscosity Measurement

  • PN C04208-1990 Raw-rubber and rubber compounds Dctcrmination ol' viscosity and rat? ol curc by thc Mooney viscometer
  • PN C81555-1986 Paints and varnishes Measurement of flow properties by means of rotary yiscometers

SE-SIS, Principle of Viscosity Measurement

AT-ON, Principle of Viscosity Measurement

  • OENORM EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)

CH-SNV, Principle of Viscosity Measurement

  • SN EN ISO 1628-1:2021 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2021)
  • SNV 24547

(U.S.) Telecommunications Industries Association , Principle of Viscosity Measurement

Hebei Provincial Standard of the People's Republic of China, Principle of Viscosity Measurement

  • DB13/T 5026.1-2019 Determination of physical properties of graphene conductive paste Part 1: Determination of paste viscosity rotational viscometer method

VE-FONDONORMA, Principle of Viscosity Measurement

ES-AENOR, Principle of Viscosity Measurement

  • UNE 103-301-1994 Determination of a soil density. Method de balance witch water bath

FI-SFS, Principle of Viscosity Measurement

  • SFS-ISO 1628/1 E:1986 Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution.part 1:General conditions

国家市场监督管理总局、中国国家标准化管理委员会, Principle of Viscosity Measurement

  • GB/T 39452-2020 Leather—Physical and mechanical tests—Tests for adhesion of finish

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Principle of Viscosity Measurement

  • ITU-T E.500-1989 Traffic Intensity Measurement Principles - Telephone Network and ISDN - Quality of Service@ Network Management and Traffic Engineering (Study Group II; 12 pp)
  • ITU-T E.500 (REV 1)-1992 Traffic Intensity Measurement Principles (Study Group II; 17 pp)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Principle of Viscosity Measurement

  • ASHRAE 4746-2005 Measurement of Solubility, Viscosity and Density of R-507A Refrigerant/Lubricant Mixtures RP-1253

CEN - European Committee for Standardization, Principle of Viscosity Measurement

  • EN ISO 29864:2019 Self adhesive tapes - Measurement of breaking strength and elongation at break

GOSTR, Principle of Viscosity Measurement

IN-BIS, Principle of Viscosity Measurement

International Electrotechnical Commission (IEC), Principle of Viscosity Measurement

IEC - International Electrotechnical Commission, Principle of Viscosity Measurement

Professional Standard - Non-ferrous Metal, Principle of Viscosity Measurement

  • YS/T 226.10-1994 Determination of sulfur content in selenium (distillation reduction absorptiometry)

Military Standard of the People's Republic of China-General Armament Department, Principle of Viscosity Measurement

  • GJBz 20058.3-1991(XG1-2015) Method for determination of physical constants of poisons - Determination of viscosity (Pine's method) Modification sheet 1-2015

ZA-SANS, Principle of Viscosity Measurement

  • SANS 350-2:2005 Rolling bearings - Tolerances Part 2: Measuring and gauging principles and methods




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved