ZH
RU
ES

Metal Heavy Metal Analysis

Metal Heavy Metal Analysis, Total:500 items.

In the international standard classification, Metal Heavy Metal Analysis involves: Soil quality. Pedology, Ferroalloys, Metrology and measurement in general, Ferrous metals, Jewellery, Non-ferrous metals, Analytical chemistry, Testing of metals, Construction materials, Nuclear energy engineering, Inorganic chemicals, Water quality, Powder metallurgy, Air quality, Shipbuilding and marine structures in general, Welding, brazing and soldering, Elements of buildings, Surface treatment and coating, Biology. Botany. Zoology, Products of the chemical industry, Vocabularies, Corrosion of metals, Materials for aerospace construction, Mining and quarrying, Organic chemicals, Transport, Measurement of force, weight and pressure, Lifting equipment, Cargo equipment, Barrels. Drums. Canisters, Radiation measurements, Cereals, pulses and derived products, Materials for the reinforcement of composites, Lubricants, industrial oils and related products, Pipeline components and pipelines, Iron and steel products, Products of non-ferrous metals, Medical equipment, Wastes, Chipless working equipment, Environmental protection, Optical equipment, Metalliferous minerals, Geology. Meteorology. Hydrology.


Standard Association of Australia （SAA）, Metal Heavy Metal Analysis

  • AS 4479.1:1997 Analysis of soils - Pretreatment of potentially contaminated soil samples for heavy metal and metalloid analysis
  • AS 4479.2:1997 Analysis of soils - Extraction of heavy metals and metalloids from soil by aqua regia - Hotplate digestion method
  • AS 3515.1:2005 Gold and gold bearing alloys - Determination of gold content (less than 30%) - Gravimetric (fire assay) method

IT-UNI, Metal Heavy Metal Analysis

Group Standards of the People's Republic of China, Metal Heavy Metal Analysis

  • T/CSTM 00900-2023 Calibration specification for food heavy metal analyzer
  • T/QGCML 1698-2023 Metal composition intelligent analysis system
  • T/CSTM 00276-2020 Terminology for failure analysis of mechanical products - metal failure analysis
  • T/CITS 0002-2021 Detection of heavy mental cadmium in grain—Time-resolved fluorescent immunochromatographic method
  • T/CITS 0001-2021 Detection of heavy mental plumbum in grain—Time-resolved fluorescent immunochromatographic method
  • T/LNEMA 002-2022 Technical guidelines for homology analysis of heavy metal pollutants based on isotope techniques
  • T/LZZLXH 037-2020 Specification for treatment of heavy metal wastewater in laboratory
  • T/CNIA 0110-2021 Heavy non-ferrous metal smelting by-product gypsum
  • T/GRM 071-2023 Specification for surface coverage of heavy metal tailings reservoir
  • T/CAMDI 045-2020 Finite Element Analysis Method for 3D Printed Metal Implants
  • T/QGCML 932-2023 Analysis method for the ratio of precious metal platinum palladium rhodium ternary liquid

RO-ASRO, Metal Heavy Metal Analysis

  • STAS 12979-1991 Metallic coatings. Ematalixation bathes analysis methods
  • STAS 9968-1980 HEAVY WHITE OIL
  • STAS 12914-1990 Metallic coatings. Eloxation bathes. Analysis methods
  • STAS 12958-1991 Matallic coatings. Coating bathes with copper-tin alloy. Analysis methods
  • STAS 2769-1990 Ferrous, non-ferrous, rare and precious prepared and raw ores. General rules for quality checking up and analysis results establishment
  • STAS SR 12926-1995 Metallic coatings. Pickling bathes Analysis methods
  • STAS 12915-1990 Metallic coatings. Browning bathes. Analysis methods
  • STAS 12927-1990 Metallic coatings. Degraesing bathes. Analysis methods
  • STAS 3208-1972 Hoisting equipmcnt WIRE ROPE SHEAVES Diameters and groove profilcs
  • STAS SR EN 26847-1996 Covered electrodes for manual metal arc welding. Deposition of a weld metal pad for chemical analysis
  • STAS SR EN 29202-1995 Jewellery. Fineness of precious metal alloys
  • STAS 12968-1991 Metallic coatings. Setting bathes of tin-lead alloy. Analysis methods
  • STAS 12459/1-1986 NICKEL ALLOYS Genera] specifications for chemical analysis carrying out
  • STAS 5954/1-1986 FRUIT AND VEGETABLE PRODUCTS Samples mineralization for metals determina ti on
  • STAS 10956/1-1977 Metal powders ALUMINIUM POWDERS General specifications for chemical analysis carrying out
  • STAS 10881-1977 Metal braing CLASSIFICATION AND SYM- BOLIZATION OF BRASING AND SOLDERING METALS AND ALLOYS
  • STAS SR ISO 5832-2:1996 Implants for surgery - Metallic materials -Part 2: Unalloyed titanium
  • STAS 10953-1985 Metals welding SAMPLING FOR THK DETER MINATION OF CHEMICAL COMPOSITION OF DEPOSITED METAL
  • STAS SR 8934-24-1997 Sodium chloride - Determination of havy metals - Colorimetric method
  • STAS 5943-1981 METALS WORKING BY DEFORMA- TION AND SEGREGATION Glossary of terms

Korean Agency for Technology and Standards (KATS), Metal Heavy Metal Analysis

British Standards Institution (BSI), Metal Heavy Metal Analysis

  • BS EN 1904:2000 Precious metals - The finenesses of solders used with precious metal jewellery alloys
  • BS EN ISO 9202:2016 Jewellery. Fineness of precious metal alloys
  • BS EN 29202:1993 Jewellery - Fineness of precious metal alloys
  • BS EN 14361:2004 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
  • BS PD ISO/TR 17276:2014 Cosmetics. Analytical approach for screening and quantification methods for heavy metals in cosmetics
  • PD ISO/TR 17276:2014 Cosmetics. Analytical approach for screening and quantification methods for heavy metals in cosmetics
  • BS 6200-3.16.1:1986 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of lead - Carbon steels and low alloy steels: gravimetric method
  • BS 6200-3.37.1:1986 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of zirconium - Steel: gravimetric method
  • BS 6200-3.26.1:1995 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of silicon - Steel and iron: gravimetric method
  • BS EN 10274:1999 Metallic materials - Drop weight tear test
  • 22/30450637 DC BS EN ISO 11210. Jewellery and precious metals. Determination of platinum in platinum jewellery alloys. Gravimetric method after precipitation using ammonium chloride
  • BS EN ISO 7625:2007 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
  • BS EN ISO 7625:2012 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
  • BS EN ISO 11210:2023 Tracked Changes. Jewellery and precious metals. Determination of platinum. Gravimetry using ammonium chloride

API - American Petroleum Institute, Metal Heavy Metal Analysis

GM Daewoo, Metal Heavy Metal Analysis

Taiwan Provincial Standard of the People's Republic of China, Metal Heavy Metal Analysis

  • CNS 202-1983 Methods for Determining Chemical Components of Zinc Metal
  • CNS 13058-1992 Methods of Chemical Analysis for Cadmium Metal
  • CNS 8280-1982 Method of Chemical Analysis for Silicon in Metallic Silicon, (Weight Method)
  • CNS 8287-1982 Method of Chemical Analysis for Sulphur in Metallic Silicon (Weight Method)
  • CNS 7387-1981 Method for analysis of radioisotopes - Heavy metals spot test
  • CNS 8004-1981 Methods of Chemical Analysis for Carbon in Manganese Metal
  • CNS 8403-1982 Methods of Chemical Analysis for Chromium and Carbon in Chromium Metal
  • CNS 8284-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Electric Method)
  • CNS 10264-1983 Method of Chemical Analysis for Metals in Lubricating Oils
  • CNS 11631-1986 Methods of Sampling for chemical Analysis of Ferroalloys (Part 3:Ferrophosphorus, Manganese Metal, Silicon Metal, Chromium Metal, Calcium Silicon and Ferroboron
  • CNS 8005-1981 Methods of Chemical Analysis for Silicon, Phosphorus, Sulphur and Ferrite in Manganese Metal
  • CNS 8283-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Conductivity Method)
  • CNS 9500-1982 Method of Chemical Analysis for Calcium in Metallic Silicon (EDTA Titration Method)
  • CNS 9494-1982 Method of Chemical Analysis for Ferrite in Metallic Silicon (EDTA Titration Method)
  • CNS 9497-1982 Method of Chemical Analysis for Aluminium in Metallic Silicon (EDTA Titration Method)

National Metrological Technical Specifications of the People's Republic of China, Metal Heavy Metal Analysis

  • JJF 1565-2016 Calibration specification for heavy metal water quality online analyzer

European Committee for Standardization (CEN), Metal Heavy Metal Analysis

  • EN 1904:2000 Precious metals - The finenesses of solders used with precious metal jewellery alloys
  • EN 14361:2004 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
  • EN 1371-1:2011 Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
  • EN 10274:1999 Metallic materials - Drop weight tear test
  • EN 1371-1:1997 Founding - Liquid Penetrant Inspection - Part 1: Sand, Gravity Die and Low Pressure Die Castings
  • EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
  • EN ISO 3892:1994 Conversion Coatings on Metallic Materials - Determination of Coating Mass per Unit Area - Gravimetric Methods (ISO 3892 : 1980)

Guangdong Provincial Standard of the People's Republic of China, Metal Heavy Metal Analysis

ES-AENOR, Metal Heavy Metal Analysis

PL-PKN, Metal Heavy Metal Analysis

  • PN H04933-1990 Metallic powders Sieve analysis
  • PN H04500-1968 Dila?ometric analysis of metali and alloys
  • PN H04232-01-1986 Chemical analysis of alloy components Chromium metallic General directives
  • PN H04232-02-1986 Chmical analysis of alloy components Chromium metallic Determination of chromium
  • PN H04232-03-1986 Chemical analysis of alloy components Chromium metallic Determination of carbon
  • PN H04232-04-1986 Chemical analysis of alloy components Chromium metallic Determination of silicium
  • PN H04232-05-1986 Chemical analysis of alloy components Chromium metallic Determination of phosphore
  • PN H04232-06-1986 Chemical analysis of alloy components Chromomium metallc Determination of ferrum
  • PN H04232-07-1986 Chemical analysis of alloy components Chromium metallic Determination of sulphur
  • PN H04232-08-1986 Chemical analysis of alloy components Chromium metallic Determination of nitrogen
  • PN H04232-09-1986 Chemical analysis of alloy components Chromium metallic Determination of aluminium
  • PN H04232-10-1986 Chemical analysis of alloy components Chromium metallic Determination of copper
  • PN H04232-11-1986 Chemical analysis of alloy components Chromium metallic Determination of cobalt
  • PN H04232-12-1986 Chemical analysis of alloy components Chromium metallic Determinatiop of tin
  • PN H04232-13-1986 Chemical analysis of alloy components Chromium metallic Determination of antimone
  • PN H04232-14-1986 Chemical analysis of alloy components Chromium metallic Determination of arsenic
  • PN H04232-15-1986 Chemical analysis of alloy components Chromium metallic Determination of arsenic
  • PN H01010-01-1990 Metals Classification
  • PN H01010-03-1991 Metals Steel Classification
  • PN M06510-1974 Lifting devices Directives calculating crane steel structures

Canadian General Standards Board （CGSB), Metal Heavy Metal Analysis

SE-SIS, Metal Heavy Metal Analysis

CZ-CSN, Metal Heavy Metal Analysis

Japanese Industrial Standards Committee (JISC), Metal Heavy Metal Analysis

ET-QSAE, Metal Heavy Metal Analysis

Hebei Provincial Standard of the People's Republic of China, Metal Heavy Metal Analysis

  • DB13/T 2259-2015 Identification and classification of major hazard sources in metal and nonmetal underground mines

BE-NBN, Metal Heavy Metal Analysis

ZA-SANS, Metal Heavy Metal Analysis

RU-GOST R, Metal Heavy Metal Analysis

  • GOST 22662-1977 Metal powders. Methods of sedimentation analysis of powders
  • GOST R 53197-2008 Jewellery. Fineness of precious metal alloys
  • GOST 22864-1983 Noble metals and alloys. General requirements for methods of analysis
  • GOST 25086-1987 Nonferrous metals and their alloys. General requirements for methods of analysis
  • GOST R 52599-2006 Precious metals and their alloys. General requirements for methods of analysis
  • GOST 17319-1976 Reagents. Methods for the determination of heavy metals
  • GOST 32578-2013 Cranes. Metal structures. Requirements for materials
  • GOST 33169-2014 Hoisting cranes. Metal structures. Proof of competence
  • GOST 28873-1990 Alloys on the basis of heavy non-ferrous metals treated under pressure. Unified grades
  • GOST 25702.0-1983 Raremetallic concentrates. General requirements to the methods of analysis
  • GOST 19521-1974 Welding of metals. Classification
  • GOST 26999-1986 Metalic manganese and nitrated manganese. Methods of sampling and sample preparation for chemical and physical-chemical analyses

KR-KS, Metal Heavy Metal Analysis

American Society for Testing and Materials (ASTM), Metal Heavy Metal Analysis

  • ASTM D5702-02 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
  • ASTM D5702-95 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
  • ASTM E57-60(1984)e1 Methods for Chemical Analysis of White Metal Bearing Alloys
  • ASTM D5702-07 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
  • ASTM D5702-07(2012) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
  • ASTM E1306-17 Standard Practice for Preparation of Metal and Alloy Samples for Chemical Analysis by Electric Arc Remelting
  • ASTM D5702-18(2022) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
  • ASTM E1941-10 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
  • ASTM UOP1005-14 Trace Metals in Organics by ICP-MS
  • ASTM D5702-18 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
  • ASTM B214-99 Standard Test Method for Sieve Analysis of Metal Powders
  • ASTM B214-07(2011) Standard Test Method for Sieve Analysis of Metal Powders
  • ASTM B214-22 Standard Test Method for Sieve Analysis of Metal Powders
  • ASTM B214-16 Standard Test Method for Sieve Analysis of Metal Powders
  • ASTM UOP714-87 Metals in Miscellaneous Samples by ICP-AES
  • ASTM D8457-22 Standard Practice for Cleaning Glass and Plastic Labware Used in Metal and Metalloid Analyses
  • ASTM E1024-97 Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
  • ASTM B214-15 Standard Test Method for Sieve Analysis of Metal Powders

German Institute for Standardization, Metal Heavy Metal Analysis

  • DIN EN 29202:1993 Jewellery; fineness of precious metal alloys (ISO 9202:1991); german version EN 29202:1992
  • DIN EN 14361:2005-02 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts; German version EN 14361:2004
  • DIN 1725-5:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition
  • DIN 8571:1981 Filler metals and auxiliary metals for metal welding; Concepts, Classification
  • DIN EN 14361:2005 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts; German version EN 14361:2004
  • DIN 1725-5 Bb.1:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition; information on alloying processes
  • DIN EN 1371-1:1997 Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings; German version EN 1371-1:1997
  • DIN EN 1371-1:2012 Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings; German version EN 1371-1:2011
  • DIN EN 10274:1999 Metallic materials - Drop weight tear test; German version EN 10274:1999

International Organization for Standardization (ISO), Metal Heavy Metal Analysis

  • ISO/TR 14936:1998 Metallic materials - Strain analysis report
  • ISO 1460:1973 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method
  • ISO 1460:2020 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method
  • ISO 6847:1985 Covered electrodes for manual metal arc welding; Deposition of a weld metal pad for chemical analysis
  • ISO/TR 17276:2014 Cosmetics - Analytical approach for screening and quantification methods for heavy metals in cosmetics
  • ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
  • ISO 21484:2017 Nuclear Energy - Fuel technology - Determination of the O/M ratio in MOX pellets by the gravimetric method
  • ISO 7625:1983 Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content
  • ISO 27831-2:2008 Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 2: Non-ferrous metals and alloys
  • ISO 27831-1:2008 Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 1: Ferrous metals and alloys
  • ISO/TR 7242:1981 Chemical analysis of light metals and their alloys; Statistical interpretation of inter-laboratory trials
  • ISO 7625:2006 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • ISO 3892:1980 Conversion coatings on metallic materials; Determination of coating mass per unit area; Gravimetric methods

IN-BIS, Metal Heavy Metal Analysis

Professional Standard-Ships, Metal Heavy Metal Analysis

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metal Heavy Metal Analysis

  • GB/T 23834.3-2009 Chemical analysis method for stannous sulfate.Part 3:Determination of alkali metals sulfate and alkaline-earth metals sulfate.Gravimetric method
  • GB/T 15072.17-2008 Test method of precious metal alloys.Determination of tungsten contents for platinum alloys.Tungstic acid gravimetry
  • GB/T 16480.5-1996 Method for chemical analysis of yttrium and yttium oxide--Determination of nitrogen content
  • GB/T 12690.13-1990 Neodymium and samarium--Determination of carbon content--High frequency--Infrared absorption method
  • GB/T 15616-1995 Qantitative method for electron probe microanalysis of metals and alloys
  • GB/T 15616-2008 Quantitative method for electron probe microanalysis of metals and alloys
  • GB/T 4702.2-1984 Methods for chemical analysis of chromium metal--The perchloric acid dehydration-gravimetric method for the determination of silicon content
  • GB/T 8654.4-1988 Methods for chemical analysis of manganese metal--The perchloric acid dehydration gravimetric method for the determination of silicon content
  • GB/T 15072.1-1994 Gold,palladium alloys.Determination of gold content
  • GB/T 15072.18-1994 Gold alloys-Determination of iron content
  • GB/T 15072.19-1994 Gold alloys-Determination of chromium content.
  • GB/T 15072.20-1994 Gold alloys-Determination of zirconium content
  • GB/T 15072.9-1994 Gold alloys-Determination of indium content
  • GB/T 15072.10-1994 Gold alloys-Determination of nickel content
  • GB/T 15072.11-1994 Gold alloys-Determination of gadolinium content
  • GB/T 15072.7-1994 Gold alloys-Determination of chromium content
  • GB/T 14635.3-1993 Heavy rare earth metals and their compounds. Determination of total rare earth contents. EDTA volumetric method
  • GB/T 15072.4-2008 Test method of precious metal alloys.Determination of palladium content for palladium and silver alloys.Butanedione dioxime gravimetry
  • GB/T 24213-2009 General rules for original position statistic distribution analysis method
  • GB/T 20259-2006 Chemical analysis methods for marine polymetallic nodules
  • GB/T 15072.16-1994 Gold alloys-Determination of copper and manganese contents
  • GB/T 15072.5-1994 Gold,Palladium alloys-Determination of silver content
  • GB/T 30024-2013 Cranes.Proof of competence of steel structures
  • GB/T 12690.27-1990 Rare-earth metals and their oxides--Determination of ignition loss--Gravimetric method
  • GB/T 15072.8-1994 Gold,Palladium and silver alloys-Determination of copper content
  • GB/T 15072.3-1994 Gold,platinum and palladium alloys-Determination of platinum content
  • GB/T 15072.17-1994 Platinum alloys-Determination of tungsten content
  • GB/T 15072.12-1994 Silver alloys-Determination of vanadium content
  • GB/T 15072.13-1994 Silver alloys-Determination of cerium content
  • GB/T 15072.2-1994 Silver alloys-Determination of silver content
  • GB/T 15072.14-1994 Silver alloys-Determination of aluminium content
  • GB/T 8654.2-1988 Methods for chemical analysis of manganese metal--The titanium trichloride-potassium volumetric method for the determination of iron content
  • GB/T 21198.4-2007 Determination of precious metals in precious metals jewellery alloys.Method using ICP spectrometry.Part 4: 999‰ precious metals jewellery alloys.Determination of precious metals.Difference method
  • GB/T 15072.4-1994 Palladium,silver alloys-Determination of palladium content
  • GB/T 15072.6-1994 Platinum,Palladium alloys-Determination of iridium content
  • GB/T 12684.8-1990 Boric acid for industrial use--Determination of heavy metal content
  • GB/T 17365-1998 Method of preparation for samples of metal and alloy in electron probe microanalysis
  • GB/T 15072.15-1994 Gold,silver and palladium alloys-Determination of nickel,zinc and manganese contents
  • GB/T 15072.10-2008 Test method of precious metal alloys.Determination of nickel content for gold alloys.Complexometric backing titration using EDTA
  • GB/T 15072.9-2008 Test method of precious metal alloys.Determination of indium content for gold alloys.Complexometric return titration using EDTA

Malaysia Standards, Metal Heavy Metal Analysis

American National Standards Institute （ANSI), Metal Heavy Metal Analysis

Professional Standard - Petrochemical Industry, Metal Heavy Metal Analysis

CU-NC, Metal Heavy Metal Analysis

  • NC 10-13-1988 Metallurgy and Metallography. Metals and Non-Ferrous Scraps and Wastes. Regulation for Selection, Recollection and Preservation
  • NC 26-174-1987 Drugs. Determination of Heavy Metals. Testing Methods

Association Francaise de Normalisation, Metal Heavy Metal Analysis

  • NF A06-591*NF EN 14361:2005 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
  • NF T20-255:1968 Chemical analysis of hydrochloric, nitric and sulphuric acids. Test of heavy metals content.
  • NF EN ISO 10111:2019 Revêtements métalliques et autres revêtements inorganiques - Mesurage de la masse surfacique - Présentation des méthodes d'analyse gravimétrique et chimique
  • FD ISO/TR 17276:2014 Cosmétiques - Approche analytique des méthodes de détection et de quantification des métaux lourds dans les cosmétiques
  • NF ISO 23345:2021 Joaillerie, bijouterie et métaux précieux - Confirmation du titre de métal précieux par analyse non destructive ED-XRF
  • NF L93-711:1961 Watertight reusable metal containers.
  • FD T75-638*FD ISO/TR 17276:2014 Cosmetics - Analytical approach for screening and quantification methods for heavy metlas in cosmetics
  • NF T25-107:2011 Carbon fibers - Chemical analysis - Determination of metal impurities.
  • NF A81-304:1994 Covered electrodes for manual metal arc welding. Deposition of a weld metal pad for chemical analysis.
  • NF EN ISO 7625:2012 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Préparation des échantillons pour analyse chimique en vue du dosage du carbone
  • NF EN 6041:2018 Série aérospatiale - Matériaux non métalliques - Méthode d'essai - Analyse Enthalpique Différentielle (AED) des matériaux non métalliques (non polymérisés)
  • NF A08-001:1979 Analyse chimique des métaux et alliages légers - Application de la spectrométrie d'absorption atomique à l'analyse de l'aluminium, du magnésium et de leurs alliages
  • NF A95-331*NF EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
  • NF A91-010:1984 Revêtements métalliques et traitements de surface des métaux - Terminologie - Classification - Symbolisation
  • NF A06-001:1979 Analysis of light metals by spectrography. Processing of test results. Statistical interpretation.
  • NF A91-474:1995 CONVERSION COATINGS ON METALLIC MATERIALS. DETERMINATION OF COATING MASS PER UNIT AREA. GRAVIMETRIC METHODS. (EUROPEAN STANDARD EN ISO 3892).

GOSTR, Metal Heavy Metal Analysis

  • GOST 25086-2011 Non-ferrous metals and their alloys. General requirements for methods of analysis
  • GOST 17319-2019 Reagents. Methods for determination of heavy metals
  • GOST 34587-2019 Cranes. Metal structures. Requirements for the manufacture

国家市场监督管理总局、中国国家标准化管理委员会, Metal Heavy Metal Analysis

HU-MSZT, Metal Heavy Metal Analysis

IET - Institution of Engineering and Technology, Metal Heavy Metal Analysis

工业和信息化部, Metal Heavy Metal Analysis

  • XB/T 627-2020 Chemical analysis methods for praseodymium, neodymium and gadolinium metals
  • YS/T 1026-2015 Metal injection molding high specific gravity tungsten alloy pellets
  • JB/T 10786-2021 Metal mold gravity casting machine technical conditions

YU-JUS, Metal Heavy Metal Analysis

  • JUS C.A1.404-1982 Methods for chemical analysis of ferroalloys. Gmrimauiu determination of silicon in ferro-manganese and manganese-metals
  • JUS C.H3.022-1989 Weldiog. Covered electrodes for manual metal are welding. Deposition of a weld metal pad for chemical analjsis
  • JUS C.E0.005-1993 Fusible heavy metals and their alloys - register of numerical symbols for chemincal composition
  • JUS C.E0.002/1-1993 Fusible heavy metals and their alloys - Designation of products - Amendments

AT-ON, Metal Heavy Metal Analysis

  • ONORM M 1373 Teil.1-1985 Rough castings ofheavy metal alloys; dimensional variations
  • ONORM M 7828 Teil.2-1984 Testing of filier metals by weld specimens; arc welded fest pieces tor the determination of the chemical analysis of the deposited weld-metal at low heat-input

PT-IPQ, Metal Heavy Metal Analysis

  • NP EN 12149-1-1999 Wallcoverings in roll form Determination of migration of heavy metais and certain other elements, of vinyl chloride monomer and of formaldehyde release

Professional Standard - Non-ferrous Metal, Metal Heavy Metal Analysis

  • YS/T 561-2009 Method for chemical analysis of precious metals alloys.Platinum-rhodium alloys.Determination of rhodium content.Hexaammine cobalt nitrate gravimetriy
  • YS/T 371-2006 Methods for chemical analysis of precious metals alloys. General rules and regulations
  • YS/T 371-1994 Methods for chemical analysis of precious metals alloys. General rules and regulations
  • YSJ 020-1993 Terminology for extractive metallurgy of heavy non-ferrous metals
  • YS/T 372.17-2006 Methods for elementary analysis of precious alloy. Determination of tungsten and rhenium content. Tungstic acid gravimetry and thiourea spectrophotometry

Universal Oil Products Company (UOP), Metal Heavy Metal Analysis

ES-UNE, Metal Heavy Metal Analysis

  • UNE-EN ISO 11210:2023 Jewellery and precious metals - Determination of platinum - Gravimetry using ammonium chloride (ISO 11210:2023) (Endorsed by Asociación Española de Normalización in April of 2023.)
  • UNE-EN ISO 10111:2020 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)

Danish Standards Foundation, Metal Heavy Metal Analysis

  • DS 2214:1990 Water quality. Sampling of natural for analysis of trace metals
  • DS/EN 2103-2:1993 Aerospace series. Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Part 2: Remelting stock
  • DS/EN 14361:2005 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
  • DS/EN 26847:1994 Covered electrodes for manual metal arc welding-Deposition of a weld metal pad for chemical analysis
  • DS/ISO 21392:2021 Cosmetics – Analytical methods – Measurement of traces of heavy metals in cosmetic finished products using ICP/MS technique
  • DS/ISO 3892:1983 Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods

Heilongjiang Provincial Standard of the People's Republic of China, Metal Heavy Metal Analysis

  • DB23/T 3625.1-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 1: General Principles
  • DB23/T 3625.6-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 6: Ore Concentration Plant
  • DB23/T 3625.4-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 4: Tailings Pond
  • DB23/T 3625.2-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 2: Underground Mines
  • DB23/T 3625.3-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 3: Open-pit Mines
  • DB23/T 3625.7-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 7: Extraction and Construction Units
  • DB23/T 3625.8-2023 Assessment Guidelines for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 8: Geological Exploration Units
  • DB23/T 3625.5-2023 Assessment Guide for the Construction of Dual Prevention Mechanism in Metal and Non-metal Mines Part 5: Small Open-pit Quarry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Metal Heavy Metal Analysis

  • GB/T 34172-2017 Microbeam analysis—Electron backscatter diffraction—Phase analysis method of metal and alloy
  • GB/T 34626.2-2017 Metallic and other inorganic coatings—Cleaning and preparation of metal surfaces—Part 2: Non-ferrous metals and alloys

Lithuanian Standards Office , Metal Heavy Metal Analysis

  • LST EN 14361-2005 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts

AENOR, Metal Heavy Metal Analysis

  • UNE-EN 14361:2005 Aluminium and aluminium alloys. chemical analysis. Sampling from metal melts.

FI-SFS, Metal Heavy Metal Analysis

Professional Standard - Agriculture, Metal Heavy Metal Analysis

Military Standard of the People's Republic of China-General Armament Department, Metal Heavy Metal Analysis

  • GJB 770.204-1994 Test methods for gunpowder analysis - Determination of content of metals and metal compounds - Complexometric titration method

Professional Standard - Commodity Inspection, Metal Heavy Metal Analysis

  • SN/T 0480.9-1995 Method of analysis baryte for export.Determinationof water-solluble alkaline earth metals as calcium
  • SN/T 3109-2012 Failure analysis procedure for metal products in the imported equipments

Professional Standard - Building Materials, Metal Heavy Metal Analysis

  • JC/T 1021.7-2007 Methods for chemical analysisof nonmetal mineral and rock Part 7: Methods for chemical analysis of barite

Henan Provincial Standard of the People's Republic of China, Metal Heavy Metal Analysis

  • DB41/T 1698-2018 Guidelines for the implementation of safety standardization of dual prevention mechanisms for metal and nonmetal mines

US-FCR, Metal Heavy Metal Analysis

Professional Standard - Aerospace, Metal Heavy Metal Analysis

  • QJ/Z 78-1982 General requirements for the analysis of metal plating solutions
  • QJ 1210-1987 Method of Analysis for Printed Board Hole Metallization Solution
  • QJ 1386.1B-2011 Rules for re-inspection of metallic materials.Part 1: Ferrous metals
  • QJ 1386.2B-2011 Re-inspection regulations for metallic materials Part 2: Non-ferrous metals

Sichuan Provincial Standard of the People's Republic of China, Metal Heavy Metal Analysis

  • DB51/T 1723-2014 Guidelines for Failure Analysis of Metallic Components of Motor Vehicles

Professional Standard - Machinery, Metal Heavy Metal Analysis

国家质量监督检验检疫总局, Metal Heavy Metal Analysis

CH-SNV, Metal Heavy Metal Analysis

NL-NEN, Metal Heavy Metal Analysis

  • NEN-ISO 6847:1994 Covered electrodes for manual metal arc welding.Deposition of a weld metal pad for chemical analysis(ISO 6847:1985)

Professional Standard - Recommended Standards for Engineering Construction, Metal Heavy Metal Analysis

  • CECS 92-2016 Design standard for treatment of wastewater containing heavy metals

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Metal Heavy Metal Analysis

Indonesia Standards, Metal Heavy Metal Analysis

  • SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
  • SNI 13-6339.4.1-2001 Terms of metals, minerals and coal testing - Part D: Chemical testing of minerals and metals - Section 1: Gravimetric methods

Professional Standard - Electricity, Metal Heavy Metal Analysis

  • DL/T 991-2006 Spectral analysis guideline of metal for electrical power equipment

AIA/NAS - Aerospace Industries Association of America Inc., Metal Heavy Metal Analysis

  • NAS9931-2018 NUT@ SELF-LOCKING@ ALL METAL@ HEX AND HEAVY HEX@ NICKEL ALLOYS

Anhui Provincial Standard of the People's Republic of China, Metal Heavy Metal Analysis

  • DB34/T 3317-2019 Determination of heavy metals (lead, cadmium, chromium) in ink sticks

SAE - SAE International, Metal Heavy Metal Analysis

  • SAE AMS4484-1944 MAGNESIUM ALLOY CASTINGS (Permanent Mold) 9 Al 2 Zn (Solution Precipitation)
  • SAE AMS4282A-1943 ALUMINUM ALLOY CASTINGS (Permanent Mold) 4 Copper - 2 Silicon (Solution Precipitation)
  • SAE AMS4282-1942 ALUMINUM ALLOY CASTINGS (Permanent Mold) 4 Copper - 2 Silicon (Solution Precipitation)

Society of Automotive Engineers (SAE), Metal Heavy Metal Analysis

  • SAE AMS4484-2000 MAGNESIUM ALLOY CASTINGS (Permanent Mold) 9 Al 2 Zn (Solution Precipitation)

未注明发布机构, Metal Heavy Metal Analysis

  • BS ISO 27831-1:2008(2011) Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces Part 1 : Ferrous metals and alloys
  • BS ISO 27831-2:2008(2011) Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces Part 2 : Non - ferrous metals and alloys

VN-TCVN, Metal Heavy Metal Analysis

  • TCVN 7665-2007 Metallic coatings.Hot dip galvanized coatings on ferrous materials.Gravimetric determination of the mass per unit area

Professional Standard - Aviation, Metal Heavy Metal Analysis

  • HB 7739-2004 Failure analysis procedure and requirements for aeronautical metal material products

American Society of Mechanical Engineers (ASME), Metal Heavy Metal Analysis

Professional Standard - Ocean, Metal Heavy Metal Analysis

  • HY/T 132-2010 Pretreatment guideline of heavy metals analysis in the marine sediments and organisms-Microwave assisted acid digestion

  Heavy Metal Analysis, Heavy Metal Analysis, Digestion heavy metal analysis, Heavy metal analysis method, Soil Heavy Metal Analysis, Soil Heavy Metal Analysis, Metal Heavy Metal Analysis, Heavy metal analysis method, Fluorescence analysis of heavy metals, Heavy metal fluorescence analysis, Heavy Metal Gold Analysis, Heavy Metal Analysis Center, Rapid Analysis of Heavy Metals, Fluorescence analysis of heavy metals, Total Heavy Metal Analysis, Heavy metal analysis in water, heavy metal analysis xrf, xrf heavy metal analysis, xrf heavy metal analysis, Soil Heavy Metal Analysis.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved