ZH
RU
ES

active site electrochemistry

active site electrochemistry, Total:499 items.

In the international standard classification, active site electrochemistry involves: Testing of metals, Iron and steel products, Corrosion of metals, Analytical chemistry, Products of the chemical industry, Non-metalliferous minerals, Water quality, Protection against dangerous goods, Environmental protection, Buildings, On-board equipment and instruments, Inorganic chemicals, Non-ferrous metals, Laboratory medicine, Fertilizers, Construction materials, Ferroalloys, Metalliferous minerals, Equipment for entertainment, Sterilization and disinfection, Petroleum products in general, Power stations in general, Welding, brazing and soldering, Surface treatment and coating, Pulps, Ferrous metals, Geology. Meteorology. Hydrology, Spices and condiments. Food additives, Leather technology, Powder metallurgy, Insulating materials, Power transmission and distribution networks, Organic chemicals, Glass, Products of non-ferrous metals, Materials for aerospace construction, Wind turbine systems and other alternative sources of energy, MINING AND MINERALS, Optics and optical measurements, Shipbuilding and marine structures in general, Production in the chemical industry, Semiconducting materials, Alarm and warning systems, Electrical accessories, Applications of information technology, Printed circuits and boards, Food products in general, Civil engineering in general, Mechanical testing, Industrial automation systems, Metrology and measurement in general, Pesticides and other agrochemicals, Electricity. Magnetism. Electrical and magnetic measurements, Vocabularies, Electrical wires and cables, Standardization. General rules, Plastics, Integrated circuits. Microelectronics, Dentistry.

Taiwan Provincial Standard of the People's Republic of China, active site electrochemistry

CNS 12258-1988 Method of Electrochemical Reactivation Ratio Measurement for Stainless Steels
CNS 1633-1964 Carbon, Decolorizing (Activated Charcoal)

Korean Agency for Technology and Standards (KATS), active site electrochemistry

KS D 7130-2005 Method of electrochemical potentiokinetic reactivation ratio measurement for stainless steels
KS C IEC 60746-5-2014(2019) Expression of performance of electrochemical analyzers — Part 5: Oxidation-reduction potential or redox potential
KS M ISO 4316-2004(2019) Surface active agents－Determination of pH of aqueous solutions－Potentiometric method
KS D ISO 17475-2017(2022) Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D 7130-2005(2020) Method of electrochemical potentiokinetic reactivation ratio measurement for stainless steels
KS M ISO 4316:2004 Surface active agents－Determination of pH of aqueous solutions－Potentiometric method
KS D ISO 6467-2002(2012) Ferrovanadium－Determination of vanadium content－Potentiometric method
KS I ISO 9509-2008(2018) Water quality－Method for assessing the inhibition of nitrification of activated sludge micro organisms by chemicals and wastewaters
KS D ISO 4947-2002(2017) Steel and cast iron－Determination of vanadium content－Potentiometric titration method
KS M ISO 19071:2021 Leather — Chemical tests — Determination of chromium(VI) and the reductive potential for chromium tanning agents
KS M ISO 6227-2017(2022) Chemical products for industrial use — General method for determination of chloride ions — Potentiometric method
KS D ISO 17475:2008 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 17475:2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 4140-2008(2018) Ferrochromium and ferrosilicochromium－Determination of chromium content－Potentiomentric mehtod
KS D ISO 7529-2012(2017) Nickel alloys－Determination of chromium content－Potentiometric titration method with ammonium iron(II) sulfate
KS I 3221-2007 Water quality－Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium[Semi-continuous activated sludge method(SCAS)]
KS D ISO 4937-2002(2017) Steel and iron－Determination of chromium content－Potentiometric or visual titration method
KS C IEC 60455-3-2-2015(2020) Resin based reactive compounds used for electrical insulation－Part 3：Specifications for individual materials－Sheet 2：Quartz filled epoxy resinous compounds
KS C IEC 60746-3-2014(2019) Expression of performance of electrochemical analyzers — Part 3: Electrolytic conductivity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, active site electrochemistry

GB/T 29088-2012 Corrosion of metals and alloys.Electrochemical potentiokinetic reactivation measurement using the double loop method
GB/T 20245.5-2013 Expression of performance of electrochemical analyzers.Part 5:Oxidation-reduction potential or redox potential
GB/T 21796-2008 Chemicals.Activated sludge, respiration inhibition test
GB/T 21830-2008 Chemicals.Daphnia sp.,acute immobilisation test
GB/T 21796-2022 Chemicals—Activated sludge respiration inhibition test
GB/T 9725-1988 Chemical reagent--General rules for potentiometric titration
GB/T 9725-2007 Chemiaal reagent.General rule for potentiometric titration
GB/T 21854-2008 Chemicals.Fish early-life stage toxicity test
GB/T 42367-2023 Chemical Protozoa Activated Sludge Inhibition Test
GB/T 6368-2008 Surface active agents.Determination of pH of aqueous solution.Potentiometric method
GB/T 6368-1993 Surface active agents. Determination of pH of aqueous solutions. Potentiometric method
GB/T 24196-2009 Corrosion of metals and alloys.Electrochemical test methods.Cuidelines for conducting potentiostatic and potentiodynamic polarization measurements
GB/T 3256.1-1982 Chemical analysis of zirconium powder for electro-vacuum uses--The gravimetric method for determination of total zirconium and active zirconium
GB/T 3169.1-1982 Chemical analysis of aluminum powder--The gasometric method for determination of active aluminum
GB/T 4374.8-1984 Methods for chemical analysis of magnesium powders and aluminum-magnesium alloy powders--The gasometric method for the determination of active magnesium and active aluminum-magnesium contents
GB/T 21817-2008 Chemicals.Inherent biodegradability.Modified SCAS test
GB/T 8704.5-1994 Methods for chemical analysis of ferrovanadium. The potentiometric method for the determination of vanadium content
GB/T 21829-2008 Chemicals.Simulation test.Aerobic sewage treatment:Activated sludge units
GB/T 8654.7-1988 Methods for chemical analysis of manganese metal--The potentiometric titration method for the determination of manganese content
GB/T 10574.9-1989 Tin-lead solders--Determination of silver content--Potentiometric titrimetric method
GB/T 5686.1-1988 Methods for chemical analysis of silicomanganese alloy--The potentiometric titration method for the determination of manganese content
GB 223.20-1982 Chemical analysis of iron,steel and alloy--The determination of cobalt by the potentiometric titration method
GB/T 5124.3-1985 Methods for chemical analysis of hardmetals--The potentiometric method for the determination of cobalt content
GB/T 11064.3-1989 Lithium carbonate--Determination of lithium chloride content--Potentiometric method
GB/T 223.20-1994 Methods for chemical analysis of iron steel and alloy.The Potentiometric titration method for the determination of cobalt content
GB/T 10323-1988 Methods for chemical analysis of ferrochromium and silicochromium--The potentiometric titration method for the determination of chromium content
GB/T 42717-2023 Evaluation method for grid-connected performance of electrochemical energy storage power station
GB 28234-2011 Safety and sanitation standard for acidic electrolyzed-oxidizing water generator
GB/T 17848-1999 Test methods for electrochemical properties of sacrificial anodes
GB/T 26105-2010 Test of rust preventive oil for rust preventing ability.Electrochemical measurement with wire beam electrode
GB/T 23273.1-2009 Methods for chemical analysis of cobalt oxalate.Part 1:Determination of cobalt content.Potentiometric titration method
GB/T 15072.2-2008 Test method of precious metal alloys.Determination of silver contents for silver alloys.Potentionmeter titration with sodium chloride
GB/T 11064.3-2013 Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride.Part 3:Determination of lithium chloride content.Potentiometric method
GB/T 15072.5-2008 Test method of precious metal alloys.Determination of silver content for gold and palladium alloys.Potentionmeter titration with potassium iodide
GB/T 26109-2010 Test of aqueous protective fluids for rust preventing ability.Electrochemical measurement with wire bean electrode
GB/T 20245.3-2013 Expression of performance of electrochemical analyzers.Part 3:Electrolytic conductivity
GB/T 31270.13-2014 Test guidelines on environmental safety assessment for chemical pesticides.Part 13:Daphnia sp. acute immobilisation test
GB/T 8754-2006 Anodizing of aluminium and its alloys. Insulation check.by measurement of breakdown potential
GB/T 24488-2009 Test method for electrochemical properties of magnesium alloys sacrificial anode
GB/T 20245.1-2006 Expression of performance of electrochemical analyzers.Part 1: General
GB/T 20245.2-2013 Expression of performance of electrochemical analyzers.Part 2:pH value

Professional Standard - Chemical Industry, active site electrochemistry

HG/T 3491-1999 Chemical reagent.Charcoal activated
HG/T 5029~5030-2016 Activity test of cobalt molybdenum sulfide catalyst and chemical composition analysis method of cobalt molybdenum sulfide catalyst (2016)
HG/T 5579～5583-2019 Test methods for activity of terephthalic acid hydrotreating catalysts, chemical composition analysis methods and activity test methods for polyethylene oxide catalysts, test methods for activity test methods for n-olefin to isobutylene catalysts in lique
HG/T 5031~5032-2016 Sulfur capacity test of activated carbon alkali desulfurizer at room temperature and chemical composition analysis method of activated carbon alkali desulfurizer (2016)
HG/T 5033~5034-2016 Activity Test and Chemical Composition Analysis Method of Platinum Series Benzene Hydrogenation to Cyclohexane Catalysts (2016)
HG/T 5417～5420-2018 Catalyst activity test method for methanol vapor phase dehydration to dimethyl ether, manganese-based ozonolysis catalyst chemical composition analysis method and activity test method, and chemical composition analysis method for n-olefin to isobutylene c
HG/T 5316～5319-2018 Test method for activity of ammonia cracking hydrogen production catalyst, analysis method for chemical composition of sweetening catalyst at room temperature, sulfur capacity test and chemical composition analysis method for manganese oxide desulfurizati
HG/T 4543-2013 Water treatment chemicals.Determination of corrosion inhibition performance.Potentiodynamic polarization method

Professional Standard - Forestry, active site electrochemistry

LY/T 1581-2000 Activated carbon for chemical reagent

Association Francaise de Normalisation, active site electrochemistry

NF T73-207:1978 Surface active agents. Determination of the sodium chloride contentpotentiometric method.
NF EN 14480:2004 Agents de surface - Détermination des agents de surface anioniques - Méthode potentiométrique de titrage dans deux phases
NF T73-287*NF EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
NF T73-282*NF EN 13716:2002 Surface active agents - Determination of total base nitrogen - Potentiometric titration.
NF T95-017*NF EN 15799:2010 Products used for treatment of swimming pool water - Powdered activated carbon
NF T73-206:1996 Surface active agents. Determination of the pH value of surfactant solutions or dispersions.
NF T20-284:1970 Chemical analysis of nitric acid. Potentiometric determination of chlorides.
NF EN 14668:2005 Agents de surface - Détermination des agents de surface ammonium quaternaire dans les matières premières et les produits formulés - Méthode de titrage potentiométrique dans deux phases
NF A05-403*NF EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements.
NF T73-281*NF EN 13560:2002 Surface active agents - Determination of amide nitrogen content - Potentiometric titration.
NF EN 13716:2002 Agents de surface - Détermination de la teneur en azote total basique - Titrage potentiométrique
NF EN 12915-1:2009 Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Charbon actif en grains - Partie 1 : charbon actif en grains vierge
NF A10-910:1977 Chemical analysis of ferro-vanadium. Potentiometric determination of vanadium.
NF EN 14880:2005 Agents de surface - Détermination de la teneur en sulfate inorganique dans les agents de surface anioniques - Méthode potentiométrique de titrage avec électrode à membrane sélective au plomb
NF T73-283*NF EN 13717:2003 Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration.
NF A06-102:1969 Chemical analysis of manganese ores. Potentiometric determination of manganese.
NF T73-293*NF EN 14880:2005 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method.
NF T72-145:2013 Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
NF EN 13560:2002 Agents de surface - Détermination de la teneur en azote sous forme amide - Titrage potentiométrique
NF T03-351:1982 Chemical proudkts. Determination of mutagen activity to {salmonella} {typhimurium} (ames test).
NF T20-057:1981 Produits chimiques à usage industriel - Méthode générale de dosage des ions chlorure - Méthode potentiométrique.
NF EN 14669:2005 Agents de surface - Détermination des agents de surface anioniques et des savons dans les détergents et produits nettoyants - Méthode de titrage potentiométrique dans deux phases
NF T73-290*NF EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two phase titration method
NF S51-215/A3:2007 Safety of toys - Part 4 : experimental sets for chemistry and related activities.
NF S51-215:1990 Safety of toys. Part 4 : experimental sets for chemistry and related activities.
NF T73-291*NF EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method.
NF T20-741:1967 Chemical analysis of maleic and phthalic anhydrides. Potentiometric determination of free acidity.
NF G52-024*NF EN ISO 19071:2016 Leather - Chemical tests - Determination of chromium (VI) and the reductive potential for chromium tanning agents
NF A05-200:1985 Physico-chemical testing - Calibration of the aggressivity of exposure localities under natural atmospheres
NF T90-721:2023 Qualité de l'eau - Encagement in situ de gammares pour la mesure de la bioaccumulation de substances chimiques
NF T72-700:2011 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1).
NF T72-700*NF EN 13623:2020 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1)
NF C46-270-3*NF EN 60746-3:2004 Expression of performance of electrochemical analyzers - Part 3 : electrolytic conductivity
NF EN ISO 19071:2016 Cuir - Essais chimiques - Détermination de la teneur en chrome (VI) et du potentiel de réduction des agents de tannage au chrome
NF EN 13717:2003 Agents de surface - Détermination de la teneur en azote sous forme amine primaire, secondaire et tertiaire - Titrage potentiométrique
NF C26-163-4*NF EN 60455-3-4:2003 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 4 : filled polyurethane compounds
NF ISO 16966:2014 Énergie nucléaire - Technologie du combustible nucléaire - Méthode théorique de calcul de l'activation pour évaluer la radioactivité des déchets activés produits par les centrales nucléaires
NF T90-341*NF EN ISO 9509:2006 Water quality - Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms.
NF C26-163-8*NF EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 8 : resins for cable accessories
NF A05-326*NF EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
NF T72-152:1997 Chemical disinfectants and antiseptics. Basic bactericidal activity. Test method and requirements (phase 1).
NF T72-202:1997 Chemical disinfectants and antiseptics. Basic fungicidal activity. Test method and requirements (phase 1).
NF C26-163-3*NF EN 60455-3-3:2003 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 3 : unfilled polyurethane compounds
NF T72-232*NF EN 14347:2005 Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1)
NF A06-331*NF EN 10071:2012 Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method
NF A06-331:1989 Chemical analysis of ferrous materials. Determination of manganeses in steels and irons. Electrometric titration method.
NF EN 14347:2005 Désinfectants et antiseptiques chimiques - Activité sporicide de base - Méthode d'essai et exigences (phase 1)
NF C26-163-1*NF EN 60455-3-1:2003 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : unfilled epoxy resinous compounds.
NF C26-163-2*NF EN 60455-3-2:2003 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 2 : quartz filled epoxy resinous compounds
NF EN 15168:2007 Agents de surface - Détermination de l'indice d'hydroxyle - Méthode à la p-toluènesulfonylisocyanate (TSI) et dosage potentiomètrique avec l'hydroxyde de tétrabutylammonium
NF C26-162*NF EN 60455-2:2016 Resin based reactive compounds used for electrical insulation - Part 2 : methods of test
NF EN 1793-6+A1:2021 Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 6 : caractéristiques intrinsèques - Valeurs in situ d'isolation aux bruits aériens dans des conditions de champ ac...
NF EN 1793-6/IN1:2021 Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 6 : caractéristiques intrinsèques - Valeurs in situ d'isolation aux bruits aériens dans des conditions de champ ac...
NF EN 13704:2018 Désinfectants chimiques - Essai quantitatif de suspension pour l'évaluation de l'activité sporicide des désinfectants chimiques utilisés dans le domaine de l'agro-alimentaire, dans l'industrie, dans les domaines domestiques et en collectivité...
UTE C32-063-1:2009 Comportement chimique des matériaux de gaine et d'isolation des câbles de communication
NF T90-341:1995 Water quality. Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water.
NF S91-141:1997 Biodégradabilité des alliages métalliques utilisés en art dentaire - Normalisation d'essais électrochimiques

AENOR, active site electrochemistry

UNE 55906:1985 SURFACE ACTIVE AGENTS. SOAPS. DETERMINATION OF CHLORIDE CONTENT. POTENTIOMETRIC METHOD
UNE 55803:1986 SURFACE ACTIVE AGENTS. CHEMICAL PRODUCTS TO BE USED AS RAW MATERIALS IN DETERGENT FORMULATIONS. GENERAL METHODS FOR DETERMINATION OF CHLORIDE IONS. POTENTIOMETRIC METHOD
UNE-EN 14480:2005 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
UNE-EN 13716:2002 Surface active agents - Determination of total base nitrogen - Potentiometric titration.
UNE-EN 14880:2006 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method
UNE-EN 13560:2002 Surface active agents - Determination of amide nitrogen content - Potentiometric titration
UNE-EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
UNE-EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
UNE-EN 13717:2003 Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration.
UNE-EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
UNE 55750:1984 SURFACE ACTIVE AGENTS. CONDENSED PHOSPHATES TO BE USED AS RAW-MATERIALS IN DETERGENT FORMULATIONS. DETERMINATION OF CHLORIDE CONTENT. POTENCIOMETRIC METHOD
UNE-EN 15168:2007 Surface active agents - Determination of hydroxyl value. p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
UNE 55543:1994 DETERGENT FORMULATIONS CONTAINING SOAP AND OTHER SURFACTANTS. SAMPLING. CHEMICAL ANALYSIS.
UNE-EN 13971:2013 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
UNE 80225:2012 Methods of testing cement. Chemical analysis. Determination of reactive sio2 content in cements, puzzolanas and fly ash.
UNE 55718:1985 SURFACE ACTIVE AGENTS. SAMPLING OF CHEMICAL PRODUCTS TO BE USED AS RAW MATERIALS IN DETERGENT FORMULATIONS. SAFETY IN SAMPLING
UNE-EN 60746-3:2004 Expression of performance of electrochemical analyzers -- Part 3: Electrolytic conductivity
UNE-EN 60455-2:2000 Resin based reactive compounds used for electrical insulation -- Part 2: Methods of test.
UNE-EN 13623:2011 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1)
UNE-EN 60746-2:2003 Expression of performance of electrochemical analyzers -- Part 2: pH value
UNE-EN 60746-1:2003 Expression of performance of electrochemical analyzers -- Part 1: General

Professional Standard - Ferrous Metallurgy, active site electrochemistry

YB/T 4019-2006 Determination method of chemical activity of light-burned magnesia
YB/T 4019-1991 Light-burned magnesite powder chemical analysis method citric acid method to determine the activity of light-burned magnesite powder
YB 4019-1991 Light-burned magnesite powder chemical analysis method citric acid method to determine the activity of light-burned magnesite powder

工业和信息化部, active site electrochemistry

YB/T 4019-2020 Method for determination of chemical activity of light burned magnesium oxide
HG/T 5032-2016 Analysis method of chemical composition of activated carbon alkali-loaded desulfurizer
HG/T 5200-2017 Analysis method of chemical composition of activated carbon catalyst for removal of inorganic sulfur at room temperature
QB/T 5483-2020 Test methods and requirements for fungicidal activity of chemical disinfectants and fungicides
QB/T 5482-2020 Test methods and requirements for basic disinfection activity of chemical disinfectants and bactericides
YS/T 645-2017 Methods for chemical analysis of gold compounds Determination of gold amount Ferrous sulfate potentiometric titration method
YS/T 1157.4-2016 Methods for chemical analysis of crude cobalt hydroxide Part 4: Determination of manganese content by potentiometric titration
YS/T 1157.1-2016 Methods for chemical analysis of crude cobalt hydroxide Part 1: Determination of cobalt content by potentiometric titration
SJ/T 11793-2022 Test method for electrochemical properties of lithium-ion battery electrode materials
YS/T 1585.1-2022 Methods for chemical analysis of silver-tungsten alloys Part 1: Determination of silver content by potentiometric titration
YS/T 1569.2-2022 Methods of chemical analysis of lithium nickel manganate Part 2: Determination of manganese content by potentiometric titration
YS/T 1263.2-2018 Methods for chemical analysis of lithium nickel cobalt aluminate Part 2: Determination of cobalt content by potentiometric titration

German Institute for Standardization, active site electrochemistry

DIN IEC 60746-5:1996-07 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
DIN EN ISO 12732:2008-07 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006); German version EN ISO 12732:2008
DIN EN 17818:2022-05 Devices for in-situ generation of biocides - Active chlorine generated from sodium chloride by electrolysis; German and English version prEN 17818:2022 / Note: Date of issue 2022-04-01*Intended as replacement for DIN 19693 (2021-07).
DIN 19693:2021-07 Devices for water treatment - In-situ generation of biocides - Active chlorine generated from sodium chloride by electrolysis / Note: This standard is part of the DVGW body of rules.*To be replaced by DIN EN 17818 (2022-05).
DIN EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method; German version EN 14480:2004
DIN EN 14480 Berichtigung 1:2006 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method; German version EN 14480:2004, Corrigenda to DIN EN 14480:2004-11; German version EN 14480:2004/AC:2006
DIN EN 13716:2003-05 Surface active agents - Determination of total base nitrogen - Potentiometric titration; German version EN 13716:2001
DIN 19693:2021 Devices for water treatment - In-situ generation of biocides - Active chlorine generated from sodium chloride by electrolysis
DIN EN 13716:2003 Surface active agents - Determination of total base nitrogen - Potentiometric titration; German version EN 13716:2001
DIN EN ISO 17475:2008-07 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008
DIN EN 13560:2002-03 Surface active agents - Determination of amide nitrogen content - Potentiometric titration; German version EN 13560:2001
DIN EN 14480:2004-11 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method; German version EN 14480:2004
DIN EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); English version of DIN EN ISO 17475:2008-07
DIN EN 13717:2003-03 Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration; German version EN 13717:2002
DIN EN 13704:2002 Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical desinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2/step 1); German version EN 13704:2
DIN EN 13717:2003 Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration; German version EN 13717:2002
DIN EN 14880:2005-11 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method; German version EN 14880:2005
DIN EN 71-4/A3:2007 Safety of toys - Part 4: Experimental sets for chemistry and related activities; German version EN 71-4:1990/A3:2007
DIN EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006); German version EN ISO 12732:2008
DIN EN 14668:2005-09 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005
DIN EN ISO 19071:2016-07 Leather - Chemical tests - Determination of chromium(VI) and the reductive potential for chromium tanning agents (ISO 19071:2016); German version EN ISO 19071:2016
DIN EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005
DIN EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method; German version EN 14669:2005
DIN EN 14668 Berichtigung 1:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005, Corrigenda to DIN EN 14668:2005-09; German version EN 14
DIN EN 15799:2010 Products used for treatment of swimming pool water - Powdered activated carbon; German version EN 15799:2010
DIN EN 14480 Berichtigung 1:2006-08 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method; German version EN 14480:2004, Corrigenda to DIN EN 14480:2004-11; German version EN 14480:2004/AC:2006
DIN EN 14480 Corrigendum 1:2006 Surface active agents - Deternimation of anionic surface active agents - Potentiometric two-phase titration method Corrigendum 1 to English version of DIN EN 14480:2004-11
DIN EN 12903:2009 Products used for the treatment of water intended for human consumption - Powdered activated carbon; English version of DIN EN 12903:2009-07
DIN EN 13560:2002 Surface active agents - Determination of amide nitrogen content - Potentiometric titration; German version EN 13560:2001
DIN EN 14669:2005-09 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method; German version EN 14669:2005
DIN EN 14668 Berichtigung 1:2006-08 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method; German version EN 14668:2005, Corrigenda to DIN EN 14668:2005-09; German version EN...
DIN EN ISO 19071:2016 Leather - Chemical tests - Determination of chromium(VI) and the reductive potential for chromium tanning agents (ISO 19071:2016)
DIN EN 14347:2005 Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1); German version EN 14347:2005
DIN IEC 60746-5:1996 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
DIN EN 60746-3:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity (IEC 60746-3:2002 + Corrigendum 2002); German version EN 60746-3:2002
DIN EN 13623:2020-12 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1); German version EN 13623...
DIN EN 14347:2005-08 Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1); German version EN 14347:2005
DIN EN 15168:2007-02 Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide; German version EN 15168:2006
DIN EN 13610:2003-06 Chemical disinfectants - Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1); German version EN 13610:...
DIN EN 60746-1:2003 Expression of performance of electrochemical analyzers - Part 1: General (IEC 60746-1:2003); German version EN 60746-1:2003
DIN EN 60746-2:2003 Expression of performance of electrochemical analyzers - Part 2: pH-value (IEC 60746-2:2003 + Corrigendum 2003); German version EN 60746-2:2003

RO-ASRO, active site electrochemistry

STAS SR 13409-1998 Surface active agents - Detergents - Determination of active chlorine content - Potentiometric method
STAS 5363-1962
STAS SR 13410-1998 Surface active agents - Detergents - Detsrmination of chloride content - Potentiometric method
STAS SR CEI 746-1-1995 Expression of performance of electrochemical analyzers Part 1: General

Group Standards of the People's Republic of China, active site electrochemistry

T/GDCA 021-2023 Cosmetics-Determination of Antioxidant-Chemical Methods
T/ZSZJX 006-2020 Water quality－Determination of the chemical oxygen demand－Potentiometric titration
T/CEC 218-2019 Automatic Potentiometric Titration Method for Determination of Active Chlorine Content in Phosphate Resistant Fuels
T/QAS 082.1-2023 Chemical Analysis of Rock Salt and Glauber's Salt Part 1: Determination of Chlorine by Potentiometric Titration
T/QAS 082.2-2023 Chemical Analysis of Rock Salt and Glauber's Salt Part 2: Determination of Calcium and Magnesium by Potentiometric Titration
T/CEC 330-2020 Guidelines for Conformity Evaluation of Grid-connected Characteristics of Electrochemical Energy Storage System
T/CECS 565-2018 Technical Specification of Electrochemical Technology for Durability of Concrete Structures
T/CEC 679-2022 Technical guidelines for grid-connected safety evaluation of electrochemical energy storage power stations
T/CEC 461-2021 Operating procedures for performance testing of lithium-ion batteries used in electrochemical energy storage power stations

ES-UNE, active site electrochemistry

UNE-EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006) (Endorsed by AENOR in June of 2008.)
UNE-CEN/TR 17296:2018 Chemical disinfectants and antiseptics - Differentiation of active and non-active substances (Endorsed by Asociación Española de Normalización in January of 2019.)
UNE-EN 14480:2005/AC:2006 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
UNE-EN 13560/AC:2003 Surface active agents - Determination of amide nitrogen content - Potentiometric titration.
UNE-EN ISO 19071:2016 Leather - Chemical tests - Determination of chromium (VI) and the reductive potential for chromium tanning agents (ISO 19071:2016)
UNE-EN 13971:2021 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
IEEE 11073-10471-2023 IEEE Health Informatics--Device Interoperability--Part 10471: Personal Health Device Communication--Device Specialization--Independent Living Activity Hub
UNE-EN 60746-1:2004 ERRATUM Expression of performance of electrochemical analyzers -- Part 1: General

British Standards Institution (BSI), active site electrochemistry

BS EN 12915-1:2009 Products used for the treatment of water intended for human consumption - Granular activated carbon - Virgin granular activated carbon
22/30445937 DC BS EN 17818. Devices for in-situ generation of biocides. Active chlorine generated from sodium chloride by electrolysis
BS EN 12903:2009 Products used for the treatment of water intended for human consumption - Powdered activated carbon
BS EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
BS EN 14480:2004(2009) Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
BS EN 15799:2010 Products used for treatment of swimming pool water - Powdered activated carbon
PD IEC TS 62565-5-1:2023 Nanomanufacturing. Product specifications. Nanoporous activated carbon. Blank detail specification: Electrochemical capacitors
BS EN 13971:2012 Carbonate and silicate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid
BS EN 13971:2020 Carbonate and silicate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid
BS EN 13971:2008 Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
BS EN 13560:2001(2003) Surface active agents - Determination of amide nitrogen content - Potentiometric titration
BS EN 13971:2003 Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
BS EN 13971:2002 Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
BS EN 71-4:1998 Safety of toys — Part 4: Experimental sets for chemistry and related activities
BS ISO 23774:2023 Pulps. Kraft liquor. Determination of total, active and effective alkali using potentiometric titration
BS EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
BS EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
BS EN 14668:2005(2006) Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
BS EN ISO 19071:2016 Leather. Chemical tests. Determination of chromium (VI) and the reductive potential for chromium tanning agents
BS EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
BS EN 15168:2006 Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
BS EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Sheet 8: Resins for cable accessories
BS 6337-4:1984 General methods of chemical analysis. Method for determination of chloride ions by potentiometry
BS EN ISO 17475:2006 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS EN 60746-3:2002 Expression of performance of electrochemical analyzers - Electrolytic conductivity
BS EN 16845-1:2017 Photocatalysis. Anti-soiling chemical activity using adsorbed organics under solid/solid conditions. Dyes on porous surfaces
BS EN 60746-2:2003 Expression of performance of electrochemical analyzers - pH value
BS EN 60746-1:2003 Expression of performance of electrochemical analyzers - General
BS 6068-2.24:1986 Water quality. Physical, chemical and biochemical methods. Method for the determination of non-ionic surfactants using Dragendorff reagent
BS EN 10071:2012 Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method
BS EN 1040:1997 Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1)
BS EN ISO 11073-10471:2011 Health Informatics. Personal health device communication. Device specialization. Independent living activity hub
19/30386011 DC BS EN 13971. Carbonate and silicate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid
BS EN 60455-1:1998 Resin based reactive compounds used for electrical insulation. Definitions and general requirements
BS EN 60851-4:2016 Tracked Changes. Winding wires. Test methods. Chemical properties
BS ISO 24237:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale

Lithuanian Standards Office , active site electrochemistry

LST EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006)
LST EN 14480-2005 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
LST EN 14480-2005/AC-2006 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
LST EN 13716-2002 Surface active agents - Determination of total base nitrogen - Potentiometric titration
LST ISO 4316:1997 Surface active agents. Determination of pH of aqueous solutions. Potentiometric method
LST EN 14880-2006 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method
LST EN 13560-2002 Surface active agents - Determination of amide nitrogen content - Potentiometric titration
LST EN 13560-2002/AC-2003 Surface active agents - Determination of amide nitrogen content - Potentiometric titration
LST EN 14668-2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
LST EN 14668-2005/AC-2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
LST EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
LST EN 12353-2013 Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
LST EN 13717-2003 Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration
LST EN 14669-2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
LST EN 15168-2007 Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
LST EN 13971-2013 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
LST EN 13971-2020 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
LST EN 14347-2005 Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1)
LST EN 13623-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1)
LST EN 13623-2021 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1)

国家市场监督管理总局、中国国家标准化管理委员会, active site electrochemistry

GB/T 37354-2019 Analytical method of chemical composition for activated carbon mercury removal catalyst
GB/T 36700.6-2018 Chemicals—Guidance on hazard classification to the aquatic environment—Part 6：Quantitative structure-activity relationship(QSAR)
GB/T 24488-2021 Test method for electrochemical properties of magnesium alloys sacrificial anode

Professional Standard - Agriculture, active site electrochemistry

GB 9725-1988 General principles of potentiometric titration with chemical reagents
NY/T 4186-2022 Guidelines for Toxicity Tests of Chemical Pesticides in Fish in Early Life Stages

CEN - European Committee for Standardization, active site electrochemistry

PD CEN/TR 17296:2018 Chemical disinfectants and antiseptics - Differentiation of active and non-active substances
PREN 1397-2019 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
EN 467:1995 Protective Clothing - Protection Against Liquid Chemicals - Performance Requirements for Garments Providing Protection to Parts of the Body

Danish Standards Foundation, active site electrochemistry

DS/EN 14480/AC:2006 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
DS/EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
DS/EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
DS/EN 13716:2002 Surface active agents - Determination of total base nitrogen - Potentiometric titration
DS/EN 14880:2005 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method
DS/EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
DS/EN 13560/AC:2003 Surface active agents - Determination of amide nitrogen content - Potentiometric titration
DS/EN 13560:2002 Surface active agents - Determination of amide nitrogen content - Potentiometric titration
DS/EN 14668/AC:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
DS/EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
DS/EN 13717:2003 Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration
DS/EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
DS/EN 15168:2007 Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
DS/EN 13971:2013 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
DS/EN 60746-3/Corr.1:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
DS/EN 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
DS/EN 60455-2:1999 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
DS/EN 13623:2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1)
DS/EN 13623:2020 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems – Test method and requirements (phase 2, step 1)

Professional Standard - Urban Construction, active site electrochemistry

CJ/T 96-2013 General detecting methods for the chemical characteristic of domestic refuse

CZ-CSN, active site electrochemistry

CSN 44 1575 Cast.6-1972 Chemical analysis of manganese ores. Determinalion of aclive oxygen
CSN 68 1151-1994 Testing methods for surfactans and detergents. Surface active agents. Determination of pH aqueous solutions. Potentio- etric method
CSN 42 0648 Cast.1-1986 Chemical analysis of metallic chromium. Determination of chromium by the potentiometric titration
CSN 42 0643 Cast.11-1972 Chemical analysis of alloyed nickel Determination of carbon by potentiometric method
CSN 83 0540 Cast.28-1987 Chemical and physical analysis of waste waters. Determination of anionic surfactants
CSN 83 0540 Cast.29-1987 Chemical and physical analysis of waste waters. Determination of non-ionic surfactants
CSN 70 0632 Cast.1-1986 Glass testing methods. Chemical analysis of glass. Determination of lead oxide. Volumetric method with complexone 3 (after the electrolytic separation)
CSN EN 10 071-1993 Chemical analysis of ferrous materials Determination of manganese in steels and irons. Electrometric titration method
CSN 03 8522-1988 Chemical methods for checking of　electro baths. Acid copper plating bath
CSN 40 4004-1986 Radioactive substances. Radiochemical purity determination by electrophoresis

HU-MSZT, active site electrochemistry

RU-GOST R, active site electrochemistry

GOST R 50551-1993 Goods of household chemistry. Method for the determination of active chlorine
GOST 32386-2013 Goods of household chemistry. Method for determination of active chlorine
GOST 32387-2013 Goods of household chemistry. Method for determination of active oxygen mass fraction
GOST 33442-2015 Testing of chemicals of environmental hazard. Determination of the inhibition of the activity of anaerobic bacteria
GOST R 51018-1997 Goods of household chemistry. Method for determination of non-ionic surface-active agent
GOST R 51022-1997 Goods of household chemistry. Methods for determination of anionic surface-active agent
GOST 32466-2013 Goods of household chemistry. Method for determination of non-ionic surface-active agent
GOST 32442-2013 Goods of household chemistry. Methods for determination of anionic surface-active agent
GOST 32536-2013 Testing of chemicals of environmental hazard. Daphnia sp. acute immobilisation test
GOST 32290-2013 Testing of chemicals of environmental hazard. Activated sludge, respiration inhibition test (Carbon and Ammonium Oxidation)
GOST 32294-2013 Testing of chemicals of environmental hazard. Fish, Early-Life Stage Toxicity Test
GOST R 8.887-2015 State system for ensuring the traceability of measurements. The electrokinetic potential (Zeta potential) particles in colloidal systems. Optical measurement methods
GOST R 53167-2008 Methods for determination of endurance of polymer electrical insulation materials and systems by means of acceleration tests in chemically active media. General requirements. Materials and insulation systems for law-voltage electrical products tests

CO-ICONTEC, active site electrochemistry

ICONTEC 1512-1979

United States Navy, active site electrochemistry

NAVY DOD-I-85390 VALID NOTICE 1-1987 INDICATOR, TIME-TEMPERATURE, CARD CHEMICALLY ACTIVATED, METRIC
NAVY DOD-I-85390-1980 INDICATOR, TIME-TEMPERATURE, CARD CHEMICALLY ACTIVATED, METRIC
NAVY QPL-3464-2011 Desiccants, Activated, Bagged, Packaging Use and Static Dehumidification

European Committee for Standardization (CEN), active site electrochemistry

EN 15799:2010 Products used for treatment of swimming pool water - Powdered activated carbon
FprEN 17818 Devices for in-situ generation of biocides - Active chlorine generated from sodium chloride by electrolysis
EN 13716:2001 Surface active agents - Determination of total base nitrogen - Potentiometric titration
EN 14668:2005/AC:2006 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method
EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
EN 13704:2002 Chemical desinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical desinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1)
EN 13704:2018 Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food@ industrial@ domestic and institutional areas - Test method and requirements (phase 2@ step 1)
EN 15168:2006 Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
EN ISO 19071:2016 Leather - Chemical tests - Determination of chromium (VI) and the reductive potential for chromium tanning agents
EN 14668:2005 Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method

BE-NBN, active site electrochemistry

NBN T 63-133-1980 Surface active agents - Deermination of pH of àqueous solutions -Potentiometric metho?
NBN-EN 71-4-1991 Safety of toys - Part 4 : Experimental sets for chemistry and related activities

ZA-SANS, active site electrochemistry

SANS 52915-2:2008 Products used for the treatment of water intended for human consumption - Granular activated carbon Part 2: Reactivated granular activated carbon
SANS 53704:2006 Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, step 1)

American Society for Testing and Materials (ASTM), active site electrochemistry

ASTM D6173-97(2005) Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
ASTM D6173-97 Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
ASTM G108-94(2004)e1 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
ASTM D6173-97(2014) Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
ASTM D4251-89(1995)e1 Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
ASTM D4251-89(2016) Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
ASTM G108-94(2004) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
ASTM G108-94(1999) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
ASTM G108-94(2010) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
ASTM G108-94(2015) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
ASTM E1625-94 Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
ASTM D4251-89(2009) Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
ASTM D6174-97 Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
ASTM D6174-01 Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
ASTM D6174-01(2006) Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
ASTM D5638-18 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
ASTM D5638-14 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

KR-KS, active site electrochemistry

KS D ISO 17475-2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 17475-2023 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 4140-2008(2023) Ferrochromium and ferrosilicochromium－Determination of chromium content－Potentiomentric mehtod
KS M ISO 6227-2017 Chemical products for industrial use — General method for determination of chloride ions — Potentiometric method
KS M ISO 19071-2021 Leather — Chemical tests — Determination of chromium(VI) and the reductive potential for chromium tanning agents

Japanese Industrial Standards Committee (JISC), active site electrochemistry

JIS G 0580:2003 Method of electrochemical potentiokinetic reactivation ratio measurement for stainless steels
JIS K 1468-2:1999 Acid-grade fluorspar -- Method for chemical analysis Part 2: Determination of available fluorine content -- Potentiometric method after distillation

CU-NC, active site electrochemistry

NC 24-59-1986 Inorganic Chemical Products Sodium Hypochlorite Determination of Active Chlorine

Professional Standard - Non-ferrous Metal, active site electrochemistry

YS/T 574.1-2006 Determination of total zirconium and active zirconium by gravimetric method for chemical analysis of zirconium powder for electric vacuum
YS/T 574.1-2009 Methods for chemical analysis of zirconium powder for electro-vacuum uses.The gravimetric method for determination of total zirconium and active zirconium
YS/T 710.1-2009 Method for chemical analysis of cobalt oxide.Part 1:Determination of cobalt content.Potentiometric method
YS/T 349.1-2009 Methods for chemical analysis of cobalt sulfide concentrate.Part 1:Determination of cobalt content.Potentiometric titration method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, active site electrochemistry

GB/T 35519-2017 Chemicals—Stably transfected human estrogen receptor transcriptional activation assay—Detection of estrogenic agonists activation
GB/T 35515-2017 Chemicals—Fish assay for oestrogenic and androgenic activity, and aromatase inhibition
GB/T 5124.3-2017 Hardmetals—Part 3：Determination of cobalt—Potentiometric method

Professional Standard - Aviation, active site electrochemistry

HB/Z 5110.1-2000 Electrochemical degreasing and chemical degreasing solution analytical method Potentiometric titration for determination of total alkalinity
HB/Z 5105.1-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
HB/Z 5105.2-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
HB/Z 5110.2-2000 Electrochemical degreasing and chemical degreasing solution analysis method Potentiometric titration determination of sodium hydroxide, sodium carbonate, trisodium phosphate
HB 5220.25-1995 Chemical Analysis Method of Superalloy Potassium Ferricyanide Potentiometric Titration Determination of Cobalt Content
HB/Z 5105.3-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Sulfuric Acid and Phosphoric Acid
HB 5220.25-2008 Methods for chemical analysis of superalloys. Part 25: Determination of cabalt content by potassium ferricyanide potentiometric titration method
HB/Z 5090.2-2001 Analysis method for electroless nickel plating solution Determination of sodium hypophosphite content through potentiometric titration
HB 20055.2-2011 Methods for analysis of chemical milling solutions for aluminum alloy.Part 2:Determination of sodium hydroxide content by potentiometric titrimetric method
HB/Z 5107.18-2004 Methods for analysis of chemical oxidation solution for magnesium alloy-Part 18:Determination of ammonium chloride (sodium chloride)content in nitric acid oxidation solution by potentiometric method

ES-AENOR, active site electrochemistry

UNE 21-302 Pt.111-03-1986

Defense Logistics Agency, active site electrochemistry

DLA MIL-C-29462-1992 CLOTH, LAMINATED, POLYESTER, TRICOT KNIT, ACTIVATED CARBON SPHERE, CHEMICAL PROTECTIVE
DLA SMD-5962-87763 REV A-2004 MICROCIRCUIT, LINEAR, CMOS, DUAL 12-BIT, DIGITAL-TO-ANALOG CONVERTER, MONOLITHIC SILICON

International Organization for Standardization (ISO), active site electrochemistry

ISO 4316:1977 Surface active agents; Determination of pH of aqueous solutions; Potentiometric method
ISO 17475:2005 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
ISO 12732:2006 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
ISO 19071:2016 Leather - Chemical tests - Determination of chromium (VI) and the reductive potential for chromium tanning agents
ISO 19071:2016 | IULTCS/IUC 35 Leather — Chemical tests — Determination of chromium (VI) and the reductive potential for chromium tanning agents
ISO 17475:2005/cor 1:2006 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements; Technical Corrigendum 1
ISO 23774:2023 Pulps — Kraft liquor — Determination of total, active and effective alkali using potentiometric titration
ISO 6227:1982 Chemical products for industrial use; General method for determination of chloride ions; Potentiometric method
ISO 9509:1989 Water quality; method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste waters

Aerospace Industries Association, active site electrochemistry

AIA NAS 1534-1993 (Inactive)Primer Coating: Low Volatile Organic Compound, Chemical and Solvent Resistant (Rev. 1)
AIA NAS 1614-1981 (Inactive)Coating - Protective, Temporary, Water Reducible, Chemical Solution Removable (Rev. 2)

Professional Standard - Railway, active site electrochemistry

TB/T 2922.2-1998 Test method for alkali activity of aggregates used in railway concrete Chemical method

PL-PKN, active site electrochemistry

PN E04160 ArkusZ37-1973 Elec?rlc cables Me?hods ot ?es?ing Test for resistance to the action of chemical subs?ances vapours
PN C04550 ArkusZ09-1972 Water and waste water -- Tests for content of synthetic surface active agents and their biochemical oxidation -- Determination of biochemical oxidation efficiency of anionic and non-ionic synthetic surface active agents by activated sludge method in kinet
PN-EN 13971-2021-02 E Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
PN-EN 13623-2021-03 E Chemical disinfectants and antiseptics -- Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems -- Test method and requirements (phase 2, step 1)
PN C04603-04-1986 Water and waste water Tests for cyanides Determination of frec combined and total cyanides by potentiometric method with ion selective electrode

GM North America, active site electrochemistry

GM GM9651P-1996 Electrochemical Resistance of Elastomeric Compounds

Professional Standard - Energy, active site electrochemistry

NB/SH/T 0915-2015 Determination of total active sulfur number in light petroleum fractions by potentiometric titration method

Professional Standard - Electricity, active site electrochemistry

DL/T 977-2005 Managerial regulations for enterprise undertaking chemical cleaning of thermal equipment in power plant
DL/T 977-2013 Managerial regulations for enterprise undertaking chemical cleaning of thermal equipment in power plant
DL 434-1991 Regulations for implementing the legal units of measure in power plant water chemistry
DL/T 1815-2018 Reliability Evaluation Procedures for Electrochemical Energy Storage Power Station Equipment

Professional Standard - Machinery, active site electrochemistry

JB/T 7948.2-1999 Methods for chemical analysis of melted welding fluxes.The potentiometric method for determination of manganese oxide content
JB/T 10534-2005 Standard test method for simultaneous thickness and electrochemical potential determination of individual layers multilayer nickel deposit
JB/T 10528-2005 Anti-rust properties test of rust preventive oil.Electrochemical measurement with wire beam electrode
JB/T 8133.2-1999 Test method for physical-chemical properties of electrical carbon product.Resistivity
JB/T 10527-2005 Anti-rust properties test of aqueous protective fluids.Electrochemical measurement with wire beam electrode

TR-TSE, active site electrochemistry

TS 607-1968 METHODS OF CHEMICAL ANALYSIS OF MANGANESE ORES DETERMINATION OF ACTIVE OXYGEN (CONVENTIONALLY EXPRESSED AS MANGANESE DIOXIDE)

GOSTR, active site electrochemistry

GOST 32536-2020 Methods of testing the chemical products hazardous to the environment. Determination of acute toxicity for daphnia
GOST 34661-2020 Methods of testing the impact of chemical products on the human body. Testing to evaluate the carcinogenic activity

YU-JUS, active site electrochemistry

JUS EN 71-4-1993 Safety of toys. Part 4: Experimental sets for chemistry and related activities
JUS C.A1.068-1990 Hethod of chemical analysis of iron and steel. Deteralnation of vanadium content. Potentiomstric method
JUS C.A1.425-1980 Methods for chemical analysis of ferroalloys. Potentiometric determination of vanadium in fer-rovanadium
JUS C.A1.707-1991 Metho?s for ehemical analysls of nlckel aod nlckel alloys. Determlnation of chro-mium in nlckel alloys. Potentiometrlc titration methods

CH-SNV, active site electrochemistry

SEV 3035-1963
SN EN 13971-2021 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
SN EN 13623-2021 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1)

AT-ON, active site electrochemistry

ONORM M 6631-1993 Water quality - Method for assessing the inhibition of nitrification of activated Sludge micro-organisms by chemicals and waste water
OENORM EN 13971-2020 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
OENORM EN 13623-2020 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1)

U.S. Air Force, active site electrochemistry

AIR FORCE MIL-C-87261-1992 CLOTH, LAMINATED, POLYBENZIMIDAZOLE/ARARMID SUBSTRATE, ACTIVATED CARBON SPHERE, FIRE RESISTANT AND CHEMICAL PROTECTIVE

Fujian Provincial Standard of the People's Republic of China, active site electrochemistry

DB35/T 1144-2011 Determination of inorganic nitrogen and active phosphate in seawater by flow chemical analysis

Professional Standard - Light Industry, active site electrochemistry

QB/T 4969-2016 Surface active agents.Determination of cationic surfactant in raw materials and formulated products.Potentiometric titration method
QB/T 4970-2016 Surface active agents.Determination of anionic surfactant in raw materials and formulated products.Potentiometric titration method

IX-IX-IEC, active site electrochemistry

IEC TS 62565-5-1:2023 Nanomanufacturing - Product specifications - Part 5-1: Nanoporous activated carbon - Blank detail specification: Electrochemical capacitors

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, active site electrochemistry

GJB 6239.6-2008 Test method of impregnated activated carbon for military. Part 6: Chromium content. Chemical analysis method
GJB 6239.7-2008 Test method of impregnated activated carbon for military. Part 7: Ammonia content. Chemical analysis method

NL-NEN, active site electrochemistry

NEN 6209-1978 Chemical analysis of iron and steel - Potentiometric titration of the manganese content in ferromanganese

Society of Automotive Engineers (SAE), active site electrochemistry

SAE AS8045-1988 Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self- Powered)
SAE AS8045A-2011 Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self-Powered)
SAE AS8045-1993 MINIMUM PERFORMANCE STANDARD for UNDERWATER LOCATING DEVICES (ACOUSTIC) (Self-Powered)

(U.S.) Ford Automotive Standards, active site electrochemistry

FORD FLTM BP 108-08-2001 ELECTROCHEMICAL RESISTANCE OF FUEL LINES

US-FCR, active site electrochemistry

FCR COE ER 1110-1-263-1998 CHEMICAL DATA QUALITY MANAGEMENT FOR HAZARDOUS, TOXIC, RADIOACTIVE WASTE REMEDIAL ACTIVITIES

Anhui Provincial Standard of the People's Republic of China, active site electrochemistry

DB34/T 2579-2015 Methods for chemical analysis of copper electrolytes - Determination of chlorine content - Automatic potentiometric titration
DB34/T 3253-2018 Methods for chemical analysis of copper concentrates - Determination of chlorine content - Automatic potentiometric titration

Professional Standard - Commodity Inspection, active site electrochemistry

SN/T 3523-2013 Chemicals.Fish assay for oestrogenic and androgenic activity, and aromatase inhibition
SN/T 2261-2009 Determination of water-soluble chloride in iron ore by potentiometric titration

U.S. Military Regulations and Norms, active site electrochemistry

ARMY QPL-53084-6-2005 PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT
ARMY MIL-DTL-0053084 A-2006 PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT
ARMY QPL-53084-6 NOTICE 1-2008 PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT
ARMY QPL-0053084 NOTICE 2-2009 Primer, Cathodic Electrodeposition, Chemical Agent Resistant
ARMY QPL-0053084-QPD-2009 Primer, Cathodic Electrodeposition, Chemical Agent Resistant
ARMY QPL-0053084-QPD-2010 Primer, Cathodic Electrodeposition, Chemical Agent Resistant

Hubei Provincial Standard of the People's Republic of China, active site electrochemistry

DB42/T 801-2012 Automatic Potentiometric Titration Method for Determination of Active Components in Chemical Disinfectants

Shandong Provincial Standard of the People's Republic of China, active site electrochemistry

DB37/T 2345-2013 Methods for chemical analysis of gold ores Determination of gold content Activated carbon adsorption-hydroquinone volumetric method

IT-UNI, active site electrochemistry

UNI EN 13971-2021 Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
UNI 7089-1972 Chemical analysis of ferrous materials. Determination of copper in steel and in iron. Electrolytic method with controlled potential.
UNI 5083-1962
UNI EN 13623-2020 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1)

Association of German Mechanical Engineers, active site electrochemistry

DVS 1152 Beiblatt 1-1984

SE-SIS, active site electrochemistry

SIS SS-EN 10 071-1989 Chemical analysis of ferrous materials — Determination of manganese in steels and irons — Electrometric titration method
SIS SS IEC 746:1984 Electronic measuring equipment - Expression of performance of electrochemical analyzers

International Electrotechnical Commission (IEC), active site electrochemistry

IEC 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
IEC 60746-5:1992 Expression of performance of electrochemical analyzers; part 5: oxidation-reduction potential or redox potential
IEC 60746-3:2002/COR1:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity; Corrigendum 1
IEC 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
IEC 60746-3:1985 Expression of performance of electrochemical analyzers - Part 3 : Electrolytic conductivity

SAE - SAE International, active site electrochemistry

SAE AS6254A-2015 Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered)

Professional Standard - Electron, active site electrochemistry

SJ/T 11499-2015 Test method for measuring electrical properties of monocrystalline silicon carbide
SJ/T 11035-1996 Test method for chemical stability for water resistance of electronic glass
SJ/Z 9125.3-1987 Presentation for performances of electrochemical analyzers Part 3: Electrolytic conductivity

Shanghai Provincial Standard of the People's Republic of China, active site electrochemistry

DB31/T 329.2-2018 Safety technology prevention system requirements for important parts of key units Part 2: Centralized storage places for hazardous chemicals and radioisotopes
DB31/ 329.2-2005 Safety technology prevention system requirements for important parts of key units Part 2: Centralized storage places for highly toxic chemicals and radioisotopes

International Telecommunication Union (ITU), active site electrochemistry

ITU-T RESOLUTION 55-2008 Mainstreaming gender in ITU-T activities

Institute of Interconnecting and Packaging Electronic Circuits (IPC), active site electrochemistry

IPC TM-650 5.5.2.7-1998 Test Method 2.3.2 Chemical Resistance of Flexible Printed Wiring Materials

GM Europe, active site electrochemistry

GME FCA14041-2004

American National Standards Institute （ANSI), active site electrochemistry

ANSI/ASTM D5638:2005 Test Method for Chemical Resistance of Electrical Insulating Varnishes (10.02)
ANSI/IEEE 11073-10471:2008 Standard for Health Informatics - Personal Health Device Communication - Device Specialization - Independent Living Activity Hub

工业和信息化部/国家能源局, active site electrochemistry

JB/T 13221-2017 Solid material electro-thermal-magnetic coupling physical field in-situ mechanical property testing system

IN-BIS, active site electrochemistry

IS 13673 Pt.3-1993

European Committee for Electrotechnical Standardization（CENELEC）, active site electrochemistry

EN 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity

未注明发布机构, active site electrochemistry

BS EN 60746-3:2002(2003) Expression of performance of electrochemical analyzers — Part 3 : Electrolytic conductivity

IPC - Association Connecting Electronics Industries, active site electrochemistry

IPC 4552A-2017 Performance Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Boards

Standard Association of Australia （SAA）, active site electrochemistry

AS ISO 24237:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale