Hesheng tensile instrument

Hesheng tensile instrument, Total:500 items.

In the international standard classification, Hesheng tensile instrument involves: Measurement of force, weight and pressure, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Mechanical testing, Structures of buildings, Testing of metals, Aerospace electric equipment and systems, Paints and varnishes, Paper and board, Paper products, Cereals, pulses and derived products, Products of the textile industry, Agricultural machines, implements and equipment, Freight distribution of goods, Diagnostic, maintenance and test equipment, Tyres, Construction materials, Rubber, Medical equipment, Inorganic chemicals, On-board equipment and instruments, Iron and steel products, Fluid power systems, Aids for disabled or handicapped persons, Acoustics and acoustic measurements, Elements of buildings, Ferrous metals, Sports equipment and facilities, Quality, Products of non-ferrous metals, Road vehicles in general, Leather technology, Road engineering, Nuclear energy engineering, Installations in buildings, Industrial trucks, Waxes, bituminous materials and other petroleum products, Earthworks. Excavations. Foundation construction. Underground works, Flexible drives and transmissions, Materials for aerospace construction, Aerospace fluid systems and components, Measurement of time, velocity, acceleration, angular velocity, Medical sciences and health care facilities in general, Industrial automation systems, Reinforced plastics, Rubber and plastics products, Fuels, Road vehicle systems, Tobacco, tobacco products and related equipment, Coals, Equipment for petroleum and natural gas industries, Continuous handling equipment, Electricity. Magnetism. Electrical and magnetic measurements, Optical equipment, Vocabularies, Clothes, Welding, brazing and soldering, Fibre optic communications, Protection against electric shock, Electromechanical components for electronic and telecommunications equipment, Plastics, Electrical accessories, Test conditions and procedures in general.

Defense Logistics Agency, Hesheng tensile instrument

DLA A-A-59400 A VALID NOTICE 2-2012 Tester, Spring Resiliency (Push/Pull Force Gauge)
DLA MIL-DTL-23928 E (1)-2003 PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE
DLA MIL-DTL-23928 E SUPP 1-2001 PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE
DLA MIL-DTL-23928 E-2001 PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE

Hebei Provincial Standard of the People's Republic of China, Hesheng tensile instrument

DB1311/T 039-2023 Calibration specifications for adhesion tester (pull-out method)

PL-PKN, Hesheng tensile instrument

PN S76008-1990 Measuring instruments for motor vehicles and tractors Manometers Re?uirements and test
PN S76002-1989 Measuring instruments for motor vehicles and tractors General re?uirements and tests
PN P04686-1971 Felts Determination of breaking tension and elongation
PN R36151-02-1992 Agricultural tractors Test procedures Hydraulic power and lifting capacity
PN BN 6033-03-1966 Shoe rubber. Pull and Freeze Tolerance Markers
PN D04115-1958 Physical and mechanical properties of wood -- Determination of modulus of elasticity in compression parallel to grain
PN S47295-1992 Road vehicles. Caravans and light trailers. Calculation of mechanical strength of the drawbar.Steel drawbars
PN P04793-1990 Textiles Velcro strips Determination of delamination and shearing force
PN R36152-1993 Agricultural tractors. Power take-off drive shafts for machines and implements
PN R36116-1974 Agrfcultural tractors Power hydraulic system main parameters and re?nirements
PN H04357-1993 Steel and cast steel. Comparative tables of the Rockwell, Vickers, Brinell and Shore. Hardnes and tensile strength values

AENOR, Hesheng tensile instrument

UNE 82502:2007 Instruments intended to measure braking forces in service motor vehicles: Roller brake meters.
UNE 68005-2:1982 AGRICULTURAL TRACTORS. TEST PROCEDURES. PART 2. HYDRAULIC POWER AND LIFTING CAPACITY
UNE 68056:1984 AGRICULTURAL TRACTORS. POWER TAKE-OFF DRIVE SHATFS FOR MACHINES AND IMPLEMENTS
UNE-EN 14977:2007 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test

Professional Standard - Chemical Industry, Hesheng tensile instrument

HG/T 3243-1987 Technical specifications of tensile stress relaxometer of vulcanized rubber
HG/T 3243-2005 Technical specifications for tensile stress relax meter of vulcanized rubber

工业和信息化部/国家能源局, Hesheng tensile instrument

JB/T 12720-2016 Technical specifications for in-situ tensile tester for solid materials

国家发展和改革委员会, Hesheng tensile instrument

HG/T 3243-2006 Technical conditions for vulcanized rubber tensile stress relaxation instrument

IT-UNI, Hesheng tensile instrument

UNI 7900-P6-1980 Spiral pressure and tension springs. Ordering data and tension spring production
UNI 7900-P1-1978 Compression and tension spiral springs. Terms, symbols and definitions
UNI 3786-1979 Elastic material. Finished product conveyor belt. Requirements and tensile testing
UNSIDER 5-1960 Approximate conversion values for steel hardness and tensile strength
UNI 7869-1978 Flexible pliers for tension clamping and corresponding tapered bushings
UNI 7900-P2-1978 Compression and tension spiral springs. Compression spring calculation
UNI 6480-1969 Wood laminate panels and plywood. Tensile test, replaces UNI 2646
UNI 4581-1960 Level gauge for ships. Crystal tube PN 16 for levels in boilers and pressure vessels
UNI 4582-1960 Level gauge for ships. Bushings PN 16 and 40 for crystal plate levels for boilers and pressure vessels
UNI 7900-P4-1979 Compression and tension spiral springs. Classification and inspection of compression springs
UNSIDER 4-1952 Fracture of steel specimens in tensile tests. Types and terminology
UNI 7709-1977 Aluminum and aluminum alloy head-to-head welding casing. Lateral tensile test
UNI 7818-1978 Welding consumables for MIG welding of aluminum and aluminum alloys. Tensile test
UNI 4583-1960 Level gauge for ships. Crystal Plate Levels for Boilers and Pressure Vessels Crystal Plate PN 16 and 40
UNI EN 61-1978 Glass reinforced plastics. Determination of tensile properties.
UNI 3783-1979 Elastic material. Finished product conveyor belt. Requirements and tests for hood tension
UNI 4553-1960 Level gauge for ships. Crystal tube level with valve box PN 6 for boilers and pressure vessels
UNI 4573-1960 Level gauge for ships. Drain valves PN 16 and 40 for crystal tube and crystal plate levels for boilers and pressure vessels

American Society for Testing and Materials (ASTM), Hesheng tensile instrument

ASTM D7234-21 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7234-19 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7234-12 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D4964-96(2012) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D4964-96(2012)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D4964-96(2004) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM E754-80(2000)e1 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM E754-80(2006) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM E754-80(2022) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM E754-80(2014)e1 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM A318-56 Method of Tension Testing and Inspection of Steel Spring Wire
ASTM C749-92(1996) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-92(2002) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-08 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-08(2010)e1 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-13 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM G49-85(2005) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM C749-15(2020) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-15 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D4964-96(2008)e2 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM E74-18 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM E74-18e1 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D828-22 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM B557M-94 Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
ASTM A285/A285M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

国家市场监督管理总局、中国国家标准化管理委员会, Hesheng tensile instrument

GB/T 39635-2020 Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test

SE-SIS, Hesheng tensile instrument

SIS SS 3280-1979 Tractors — Power take-off and drawbar
SIS SS 2976-1979 Agricultural tractors and selfpropelled machines — Tyres — Dimensions, loads and pressure
SIS SS-ISO 4037:1985 X and y reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy
SIS SS-ISO 7641/1:1985 Road vehicles — Caravans and light trailers — Calculation of the mechanical strength of the drawbar — Part 1: Steel drawbars
SIS SS 3531-1983 Agricultural tractors - Cabs - Static test method and acceptance conditions
SIS 18 16 51-1973 Paints. Determination of adhesion between sand putty and concrete. Tensile test

SCC, Hesheng tensile instrument

CAN/CGSB 43.31-M86-1986 Labels and label strips, pressure-adhesive
CEI UNI EN ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories
BS EN 10002-3:1995 Tensile testing of metallic materials-Calibration of force proving instruments used for the verification of uniaxial testing machines
NS 1106:1986 Power transmissions and draw bars between tractor and machinery 540 and 1000 r/min
NS-ISO 4624:1978 Paints and varnishes — Pull-off test for adhesion
DANSK DS/EN ISO 4624:2016 Paints and varnishes – Pull-off test for adhesion
DANSK DS/ISO 4624:2023 Paints and varnishes – Pull-off test for adhesion
HOLDEN HN 0166-1978 Determination of Tensile Stress and Strain Properties
HOLDEN HN 0166-2013 Determination of Tensile Stress and Strain Properties
NS-EN 10002-3:1994 Metallic materials — Tensile test — Part 3: Calibration of force proving instruments used for the verification of uniaxial testing machines
DIN 53504 E:2015 Draft Document - Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DANSK DS/EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
ASME PTC 19.2-1987(R2004) Instruments and Apparatus: Part 2 Pressure Measurement
NS-EN ISO 12625-4:2016 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)
AENOR UNE-EN ISO 12625-4:2017 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)
DANSK DS/EN ISO 12625-4:2017 Tissue paper and tissue products – Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)
NS-EN ISO 12625-4:2022 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2022)
NS-EN 845-1:2013+A1:2016 Specification for ancillary components for masonry — Part 1: Wall ties, tension straps, hangers and brackets
BS PD IEC TR 63468:2023 Nuclear facilities. Instrumentation and control, and electrical power systems. Artificial Intelligence applications
UNE-EN ISO 4624:2003 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002)
AENOR UNE-EN ISO 4624:2016 Paints and varnishes. Tensile adhesion test. (ISO 4624:2016).
NS-EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
NS-EN ISO 4624:2023 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)
CAN/BNQ 1811-310-M91:1991 Agricultural Tractors - Test Procedures - Part 2: Hydraulic Power and Lifting Capacity
AENOR UNE-EN 13522:2002 Footwear. Test methods for cuts. Tensile and elongation resistance.
CSA N290.5-16:2016 Requirements for electrical power and instrument air systems of CANDU nuclear power plants
CSA N290.5-2006(R2011) Requirements for electrical power and instrument air systems of CANDU nuclear power plants
CAN/CSA N290.5-2006(R2011) Requirements for Electrical Power and Instrument Air Systems of CANDU Nuclear Power Plants
CSA N290.5-2016(2021) Requirements for Electrical Power and Instrument Air Systems of CANDU Nuclear Power Plants
CEI EN IEC 61226:2022 Nuclear power plants - Instrumentation, control and electrical power systems important to safety - Categorization of functions and classification of systems
BS 4317-21:1989 Methods of test for cereals and pulses-Determination of rheological properties of doughs using an extensograph
UNE 58440:2003 Powered industrial trucks and tractors. Brake performance and component strength.
DANSK DS/ISO 6292:2020 Powered industrial trucks and tractors – Brake performance and component strength
BS ISO 6292:1996 Powered industrial trucks and tractors. Brake performance and component strength
04/30108990 DC ISO 17567. Agriculture and forestry tractors and implements. Hydraulic power beyond
DANSK DS/ISO 17567:2020 Agricultural and forestry tractors and implements – Hydraulic power beyond
DANSK DS/ISO 5675:2021 Agricultural tractors and machinery – General purpose quick-action hydraulic couplers
ASAE/ASABE AD5675:2008(R2020) Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
10/30212123 DC BS EN 845-1. Specification for ancillary components for masonry. Part 1. Wall ties, tension straps, hangers and brackets
HOLDEN HN 1688-2016 Body and Fascia Paint Materials Productability Simulation
DIN 32935:2018 Home sports Equipment - Non-stationary tension and pression training equipment - Safety requirements and test methods
DIN EN IEC 62003:2021 Nuclear power plants – Instrumentation, control and electrical power systems – Requirements for electromagnetic compatibility testing (IEC 62003:2020); German version EN IEC 62003:2020
BS 3417-1:1984 Power take-off shafts and guards for tractors and machinery for agriculture and forestry-Specification for power take-off drive shafts
DIN EN ISO 4624 E:2014 Draft Document - Paints and varnishes - Pull-off test for adhesion (ISO/DIS 4624:2014); German version prEN ISO 4624:2014
NS 8054:1981 Furniture units - Pull-out devices - Determination of operational force and durability
BS EN 845-1:2001 Specification for ancillary components for masonry-Ties, tension straps, hangers and brackets
AIA NAS2125-2132 BOLT, LOCK, TENSION, 100° CROWN HEAD, STANDARD AND OVERSIZE, PULL-TYPE, TITANIUM ALLOY
BS ISO 9022-3:1994 Optics and optical instruments. Environmental test methods-Mechanical stress
DANSK DS/EN ISO 15253:2000 Ophthalmic optics and instruments – Optical devices for enchancing low vision
DIN 32935 E:2018 Draft Document - Home sports Equipment - Non-stationary tension and pression training equipment - Safety requirements and test methods
AS 1121:1971 Guards for agricultural tractor power take-off, power take-off shaft and implement connections
DANSK DS/EN IEC 61226:2021 Nuclear power plants – Instrumentation, control and electrical power systems important to safety – Categorization of functions and classification of systems
CEI EN 60512-17-3:2011 Connectors for electronic equipment - Tests and measurements Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
DANSK DS/EN 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
AIA NAS2005-2012 BOLT, LOCK, TENSION, PROTRUDING HEAD, STANDARD AND OVERSIZE, PULL-TYPE, TITANIUM ALLOY
BS 3500-6:1963 Methods for creep and rupture testing of metals. Tensile stress relaxation testing
BS 3500-6:1969 Methods for creep and rupture testing of metals-Tensile stress relaxation testing
AENOR UNE-EN ISO 17706:2018 Footwear. Test methods for cuts. Tensile and elongation resistance. (ISO 17706:2003).
DANSK DS/EN ISO 16585:2003 Closed end blind rivets with pull mandrel and protruding head - A2/SSt
VDI/VDE 2650 BLATT 6-2006 Requirements for self-monitoring and diagnostics in field instrumentation — pressure measurement
DANSK DS/EN IEC 62645:2020 Nuclear power plants – Instrumentation, control and electrical power systems – Cybersecurity requirements
BS IEC 62645:2019 Nuclear power plants. Instrumentation, control and electrical power systems. Cybersecurity requirements
CEI EN IEC 62645:2021 Nuclear power plants - Instrumentation, control and electrical power systems - Cybersecurity requirements
DIN EN ISO 7921 E:2023 Draft Document - Ophthalmic optics and instruments - Near vision charts (ISO/DIS 7921:2023); German and English version prEN ISO 7921:2023
VDI/VDE 2650 BLATT 6-2006 Requirements for self-monitoring and diagnostics in field instrumentation — pressure measurement

HU-MSZT, Hesheng tensile instrument

MNOSZ 13981-1954 Pressure measuring instruments, low pressure measuring instruments, low pressure and pressure measuring instruments made of metal film
MSZ 14010/2.lap-1967 Resistance thermal sensor. Thermal resistance and core
MSZ KGST 780-1977 Surface currents of electrical instruments and equipment
MSZ 2516-1958 Internal combustion engine vehicles, tractors and motorcycle electrical equipment
MSZ 17225-1987 General technical requirements for operating parts and instruments of agricultural tractors and other machinery
MSZ 05 83.3300-1971 MSZ-05 83.3300-71 welding pressure gauge, requirements and inspection regulations
MSZ 8880/2-1963 Power equipment testing tools and testing methods. FreccsenteInstruments
MSZ KGST 1912-1979 Small module cylindrical pulley power basic pulley and pull pulley
MSZ KGST 2566-1980 General industrial requirements and test methods for differential pressure measuring instruments
MSZ KGST 2426-1980 Measurement of separation force and separation pull force during inspection of semi-finished products, paper products and cartons in the paper industry

German Institute for Standardization, Hesheng tensile instrument

DIN EN 2591-412:1999 Aerospace series -Elements of electrical and optical connection; test methods - Part 412: Contact insertion and extraction forces; German version EN 2591-412:1999
DIN 15112:1979 Spring pulls; safety requirements, testing
DIN 53504:2017-03 Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN EN ISO 4624:2003 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002); German version EN ISO 4624:2003
DIN EN ISO 4624:2016-08 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016); German version EN ISO 4624:2016 / Note: To be replaced by DIN EN ISO 4624 (2022-09).
DIN EN ISO 4624:2022-09 Paints and varnishes - Pull-off test for adhesion (ISO/DIS 4624:2022); German and English version prEN ISO 4624:2022 / Note: Date of issue 2022-08-05*Intended as replacement for DIN EN ISO 4624 (2016-08).
DIN 53504:2009 Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 53504:2017 Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN EN ISO 12625-4:2022-12 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2022); German version EN ISO 12625-4:2022
DIN EN 10305-6:2005 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-6:2005
DIN EN ISO 12625-4:2022 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2022)
DIN 48323:1957-11 Telecommunication and power current overhead lines; turnbuckle for stay ropes
DIN EN ISO 4624:2023 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)
DIN 53504:1994 Testing of rubber; determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 9680:1991-01 Agricultural tractors and machinery; electric power transmission; dimensions, requirements
DIN 48323:1957 Telecommunication and power current overhead lines; turnbuckle for stay ropes
DIN EN ISO 7921:2023 Ophthalmic optics and instruments - Near vision charts (ISO/DIS 7921:2023); German and English version prEN ISO 7921:2023
DIN EN ISO 7921:2023-04 Ophthalmic optics and instruments - Near vision charts (ISO/DIS 7921:2023); German and English version prEN ISO 7921:2023 / Note: Date of issue 2023-03-24
DIN 32935:2018-09 Home sports Equipment - Non-stationary tension and pression training equipment - Safety requirements and test methods / Note: DIN 32935 (1987-09) remains valid alongside this standard until 2019-03-01.
DIN EN ISO 12625-4:2017 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016); German version EN ISO 12625-4:2016
DIN EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-6:2016
DIN EN 846-7:2012-11 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections); German version EN 846-7:2012
DIN EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test English version of DIN EN 14977:2006-09
DIN EN ISO 15253:2001 Ophthalmic optics and instruments - Optical devices for enhancing low-vision (ISO 15253:2000); German version EN ISO 15253:2000
DIN 18132:2012 Soil, testing procedures and testing equipment - Determination of water absorption
DIN 18132:1995 Soil, testing procedures and testing equipment - Determination of water absorption
DIN EN ISO 14272:2002 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000); German version EN ISO 14272:2001
DIN EN ISO 5674:2009-06 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004); German version EN ISO 5674:2009 / Note: DIN EN ISO 5674 (2007-04) remains valid alongs...

British Standards Institution (BSI), Hesheng tensile instrument

BS EN ISO 4624:2016 Paints and varnishes — Pulloff test for adhesion
BS EN ISO 12625-4:2016 Tissue paper and tissue products. Determination of tensile strength, stretch at maximum force and tensile energy absorption
ISO 4624:2023 Paints and varnishes. Pull-off test for adhesion
BS EN ISO 12625-4:2022 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
BS EN 10305-6:2005 Steel tubes for precision applications — Technical delivery conditions — Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
BS EN 60601-2-66:2013 Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
BS EN 60601-2-66:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
BS ISO 17567:2007 Agriculture and forestry tractors and implements - Hydraulic power beyond
BS 3463:1975(1999) Specification for Observation and gauge glasses for pressure vessels
PD IEC TR 63468:2023 Nuclear facilities. Instrumentation and control, and electrical power systems. Artificial Intelligence applications
21/30408953 DC BS EN ISO 12625-4. Tissue paper and tissue products. Part 4. Determination of tensile strength, stretch at maximum force and tensile energy absorption
BS EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5% ammonia test
22/30458811 DC BS EN ISO 4624. Paints and varnishes. Pull-off test for adhesion
23/30444465 DC BS EN ISO 7921. Ophthalmic optics and instruments. Near vision charts
BS EN 1726-1:1999 Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. General requirements
BS EN 13587:2010 Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method
BS EN ISO 26203-2:2011 Metallic materials. Tensile testing at high strain rates. Servo-hydraulic and other test systems
BS ISO 5675:2021 Agricultural tractors and machinery. General purpose quick-action hydraulic couplers
BS IEC 63096:2020 Nuclear power plants. Instrumentation, control and electrical power systems. Security controls
BS ISO 4347:2015 Leaf chains, clevises and sheaves. Dimensions, measuring forces, tensile strengths and dynamic strengths
BS EN IEC 61226:2021 Nuclear power plants. Instrumentation, control and electrical power systems important to safety. Categorization of functions and classification of systems
BS ISO 9022-3:1998 Optics and optical instruments - Environmental test methods - Mechanical stress
BS EN ISO 15253:2000 Ophthalmic optics and instruments - Optical devices for low-vision aids
BS EN ISO 15253:2021 Ophthalmic optics and instruments. Optical and electro-optical devices for enhancing low vision
BS ISO 9022-3:1995 Optics and optical instruments. Environmental test methods. Mechanical stress
BS ISO 5676:2023 Tractors and machinery for agriculture and forestry. Hydraulic coupling. Braking circuit
BS EN 13880-10:2018 Hot applied joint sealants. Test method for the determination of adhesion and cohesion following continuous extension and compression
BS EN 17468-1:2022 Fibre cement products. Determination of pull through and shear resistance and bending strength calculations - Flat sheets
BS EN 17468-2:2022 Fibre-cement products. Determination of pull through and shear resistance and bending strength calculations - Profiled sheets
BS 5896:2012 High tensile steel wire and strand for the prestressing of concrete. Specification
BS ISO 8759-3:2018 Agricultural tractors. Front-mounted equipment - Power take-off: General specifications and location
BS EN 60512-17-3:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
BS ISO 3783:2006 Paper and board - Determination of resistance to picking - Accelerated speed method using the IGT-type tester (electric model)
BS EN IEC 62645:2020 Nuclear power plants. Instrumentation, control and electrical power systems. Cybersecurity requirements

TR-TSE, Hesheng tensile instrument

TS 246-1965 METHOD OF DETERM1NING THE TENSILE STRENGTH, ELONGATION AND COUNT-STRENGTH PRODUCT OF YARN SKENS, BY THE CONSTANT SPEED DYNAMOMETER
TS 279-1965 CREEP AND TIME FOR RUPTURE TENS?ON TESTS ON METALLIC MATERIALS

NL-NEN, Hesheng tensile instrument

NEN 1249-1988 Paper and board - Determination of tensile properties - Constant rate of tensile force
NEN-ISO 4624:1992 Paints and varnishes. Pull-off test for adhesion (ISO 4624:1978)

National Metrological Verification Regulations of the People's Republic of China, Hesheng tensile instrument

JJG 139-2014 Tension, Compression and Universal Testing Machines
JJG 139-1999 Verification Regulation of Universal Tension and Compression Testing Machine
JJG 157-2008 Verification Regulation of Universal Tension and Compression Testing Machines for Non-metallic
JJG 157-1995 Verification Regulation of Tension Compression and Universal Testing Machina for Non-metallic

AT-ON, Hesheng tensile instrument

ONORM EN 29073-3-1993 textile. Non-woven fabric inspection methods. Maximum pull force and maximum pull force extension regulations
ONORM M 1620-1-1994 Bolted connections - Assessments for calculation, pre-tensioning forces and tightening torques

未注明发布机构, Hesheng tensile instrument

ASTM RR-D01-1163 2012 D7234-Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM RR-D01-1147 2009 D4541-Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
DIN EN 24624:1992 Paints and varnishes; Pull-off test for adhesion
DIN 53504 E:2015-08 Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 53504:1969 Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 53504:2017E Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN EN ISO 12625-4 E:2015-08 Tissue papers and tissue products Part 4: Tensile strength, maximum force tensile and tensile energy absorption (draft)
DIN EN ISO 12625-4 E:2021-07 Tissue papers and tissue products Part 4: Tensile strength, maximum force tensile and tensile energy absorption (draft)
ASTM RR-E28-1009 1989 E0074-Practices for Calibration and Verification for Force-Measuring Instruments
DIN EN ISO 4624 E:2014-06 Paint and Varnish Adhesion Pull-off Test (Draft)
DIN EN ISO 3501:2022 Plastic piping systems – Mechanical connections between fittings and pressure pipes – Testing resistance to tensile load at constant tensile force (ISO 3501:2021)
DIN EN 10305-6 E:2015-07 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
DIN ISO 6292:2022-07 Powered industrial trucks and tractors - Brake performance and component strength
AS 1580.408.5:2006(R2016) Paints and related materials - Methods of test - Adhesion - Pull-off test
ANSI/ASABE AD5675-2008(2020) Agricultural tractors and machinery — General purpose quick-action hydraulic couplers
DIN ISO 4347 E:2017-02 Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths

GSO, Hesheng tensile instrument

BH GSO 2449:2015 Digital Pressure gauge and recorder
OS GSO 2449:2014 Digital Pressure gauge and recorder
GSO ISO 12777-2:2013 Methods of test for pallet joints -- Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples
GSO ISO 12625-4:2024 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
GSO ASTM E74:2022 Standard Practices for Calibration and Verification for Force-Measuring Instruments
BH GSO ASTM E74:2023 Standard Practices for Calibration and Verification for Force-Measuring Instruments
GSO ISO 6292:2024 Powered industrial trucks and tractors — Brake performance and component strength
BH GSO ISO 4347:2016 Leaf chains, clevises and sheaves -- Dimensions, measuring forces and tensile strengths
OS GSO ISO 4347:2015 Leaf chains, clevises and sheaves -- Dimensions, measuring forces and tensile strengths
OS GSO ISO 500:1997 Agricultureal tractors-rear-mounted power-take-off -types 1, 2 and 3
OS GSO ISO 5673:1994 AGRICULTURAL TRACTORS - POWER TAKE-OFF DRIVE SHAFTS FOR MACHINES AND IMPLEMENTS
BH GSO ISO 15253:2016 Ophthalmic optics and instruments -- Optical devices for enhancing low vision
BH GSO IEC 60512-17-3:2016 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
GSO IEC 60512-17-3:2013 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

ES-AENOR, Hesheng tensile instrument

UNE 115-401-1992 Earth.Moving machinery. Tractors. Terminology and commercial specifications
UNE 115-221-1989 Earthquake tester. Tractor and loader chains. Operator wholesale
UNE 9-110-1987 Boilers and pressure equipment. Instruments for measuring pressure

European Committee for Standardization (CEN), Hesheng tensile instrument

EN 837-2:1997 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN ISO 4624:2023 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)
prEN ISO 12625-4:2021 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO/DIS 12625-4:2021)
EN 10002-3:1994 Metallic Materials - Tensile Test - Part 3: Calibration of Force Proving Instruments Used for the Verification of Uniaxial Testing Machines
EN ISO 4624:2016 Paints and varnishes Pull-off test for adhesion
EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
FprEN ISO 4624 Paints and varnishes - Pull-off test for adhesion (ISO/FDIS 4624:2023)
EN 16896:2016 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
EN ISO 15253:2021 Ophthalmic optics and instruments - Optical and electro-optical devices for enhancing low vision (ISO 15253:2021)

RU-GOST R, Hesheng tensile instrument

GOST R 51415-1999 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using a alveograph
GOST R 55223-2012 Force instruments. General metrological and technical requirements
GOST 4.179-1985 System of product-quality indices. Machines and instruments for measuring forces and strains. Nomenclature of indices
GOST 32991-2014 Pechora basin coals for power technological purposes. Specifications
GOST 3480-1976 Power take-off for agricultural tractors and power input connection for agricultural machines. Types and main parameters
GOST 270-1975 Rubber. Method of the determination elastic and tensile stress-strain properties
GOST R 54553-2019 Vulcanized rubber and thermoplastic elastomers. Determination of tensile stress-strain properties
GOST 12580-1978 Latex films. Method of the determination of elastic and tensile stress-strain properties
GOST R 54553-2011 Vulcanized rubber and thermoplastic elastomers. Determination of tensile stress-strain properties

Association Francaise de Normalisation, Hesheng tensile instrument

NF G39-002:1996 Textiles. Woven articles. Determination of the tensile strength and elongation.
NF R63-302:1999 Pressure gauges. Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles. Metrology, requirements and testing.
NF Q34-030-4*NF EN ISO 12625-4:2017 Tissue paper and tissue products - Part 4 : determination of tensile strength, stretch at maximum force and tensile energy absorption
NF V03-710:1992 Wheat flour. Physical characteristics of doughs. Part 4 : determination of rheological properties using an alveograph.
NF P85-528:2003 Sealants - Determination of adhesive and cohesive force by tensile strength test until rupture after thermal treatment
NF R15-515:1995 Road vehicules. Apparatus for belt measurement and tensioning. Test method.
NF ISO 4347:2015 Lifting chains with contiguous links, yokes and return rollers - Dimensions, measuring forces, tensile resistance forces and dynamic resistance forces
FD U14-902*FD ISO/TR 12369 + A1:2001 Agricultural tractors and machinery - Electrical power transmission connectors
NF EN 14977:2006 Copper and copper alloys - Determination of tensile stresses - 5% ammonia test
NF EN 12956:1999 Wall coverings in rolls - Determination of dimensions, straightness, spongeability and washability
NF EN 12956/A1:2002 Wall coverings in rolls - Determination of dimensions, straightness, spongeability and washability
NF P94-150-2:1999 Sols : reconnaissance et essais - Essai statique de pieu isolé sous effort axial - Partie 2 : en traction
NF A03-003:1994 Metallic materials. Tensile test. Part 3 : calibration of force proving instruments used for the verification of uniaxial testing machines.
NF E26-107:2004 Leaf chains, clevises and sheaves - Dimensions, measuring forces and tensile strengths.
NF H96-413*NF ISO 6292:2020 Powered industrial trucks and tractors - Brake performance and component strength
NF ISO 17567:2020 Tracteurs agricoles et forestiers et instruments - Puissance hydraulique externe disponible
NF ISO 5893:2020 Rubber and plastics testing apparatus - Types for tension, flexion and compression (constant translational speed) - Specifications
NF U14-201:1997 Agricultural tractors and machinery. Power take-off shafts and position of power-input connection.
NF T57-402*NF EN ISO 14129:1998 Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus over minus 45 degrees tension test method.
NF V37-021:2011 Tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter rods - Standard conditions and measurement.
NF A51-110*NF EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test.
NF G07-118-2*NF EN ISO 13935-2:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2 : determination of maximum force to seam rupture using the grab method
NF G07-118-2:1999 Textiles. Seam tensible properties of fabrics and made-up textile articles. Part 2 : determination of maximum force to seam rupture using the grab method.
NF EN ISO 12625-4:2022 Tissue paper and tissue products - Part 4: determination of tensile breaking strength, elongation at maximum force and energy absorbed at tensile breaking
NF P85-527:2003 Sealants - Determination of adhesive and cohesive force by endurance tensile strength after thermal treatment
NF T46-021:1973 Rubber and similar elastomers. Dynamic fatigue test by repeated tensile stresses.
NF S12-210:2009 Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision.
NF EN ISO 12777-2:2000 Test methods for pallet assemblies - Part 2: determination of pull-out and resistance of the head of nails and pallet straddle nails
NF ISO 500-3:2014 Agricultural tractors - Type 1, 2, 3 and 4 rear-mounted power take-offs - Part 3: PTO main dimensions and spline dimensions, PTO location

Group Standards of the People's Republic of China, Hesheng tensile instrument

T/CAMA 80-2023 Agricultural and forestry tractors and self-propelled machinery with the fifth wheel tester
T/NJ 1264-2021 Hand-held headlamp tester for agricultural and forestry tractors and self-propelled machinery
T/NJ 1170-2018 Lawn and Garden Tractor Front and Mid Drive PTO Shafts
T/NJ 1263-2021 Laser brake performance tester for agricultural and forestry tractors and self-propelled machinery
T/SDZDH 002-2020 Mask ventilation resistance and pressure difference detector Calibration method

American National Standards Institute （ANSI), Hesheng tensile instrument

ANSI/TAPPI T494 om-2013 Tensile properties of paper and paperboard (using constant rate of elongation apparatus)
ANSI/ASTM C749:2013 Test Method for Tensile Stress-Strain of Carbon and Graphite
BS EN ISO 4624:2023 Paints and varnishes. Pull-off test for adhesion (British Standard)
ANSI/ASTM C749:2015 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ANSI/IEEE 532:2007 Guide for Selecting and Testing Jackets for Power, Instrumentation and Control Cables
ANSI/EIA 364-99:1999 Gage Location and Retention Test Procedure for Electrical Connectors

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Hesheng tensile instrument

IEEE 3001.8-2013 Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems

Society of Automotive Engineers (SAE), Hesheng tensile instrument

SAE ARP5366-2017 Autopilot, Flight Director, and Autothrust Systems
SAE J722-1984 POWER TAKE-OFF DEFINITIONS AND TERMINOLOGY FOR AGRICULTURAL TRACTORS
SAE AIR1168/5-1990 Aerothermodynamic Test Instrumentation and Measurement
SAE AIR1168/5A-2011 Aerothermodynamic Test Instrumentation and Measurement
SAE AIR1168/5-2006 Aerothermodynamic Test Instrumentation and Measurement
SAE AMS4162-1968 ALUMINUM, ALLOY EXTRUSIONS 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Stress Relief Stretched and Straightened
SAE J873-2011 Drag Force Test Procedure for Construction, Forestry, and Industrial Machines
SAE AS408B-1991 PRESSURE INSTRUMENTS - FUEL, OIL and HYDRAULIC (RECIPROCATING ENGINE POWERED AIRCRAFT)
SAE J721-1996 Operating Requirements for Tractors and Power Take-Off Driven Implements
SAE AMS4165H-2003 Aluminum Alloy, Extrusions 4.4Cu 1.5Mg 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE AMS4068D-2003 Aluminum Alloy, Drawn Seamless Tubing 6.3Cu 0.30Mn 0.18Zr 0.10V 0.06Ti (2219-T3511) Solution Heat Treated and Stress Relieved by Stretching
SAE AMS4068G-2021 Aluminum Alloy, Drawn Seamless Tubing 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated and Stress Relieved by Stretching
SAE ARP5366-2001 Autopilot, Flight Director, and Autothrust Systems
SAE AS445-2008 Fuel and Oil Quantity Instruments (Turbine Powered Subsonic Aircraft)
SAE AMS5075F-2001 Steel Tubing, Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved UNS G10250
SAE J709C-1975 Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures
SAE AMS4002-2017 Aluminum Alloy Tubing, Seamless, Drawn 1.8Cu - 1.0Mg - 0.8Si - 0.20Cr Solution Heat Treated, Stress-Relieved by Stretching, and Aged (2013-T6511)
SAE J1729-2008 Parking Brake Drawbar Pull Test Procedure Truck and Bus
SAE AMS4165-1960 ALUMINUM ALLOY EXTRUSIONS 4.5Cu - 1.5Mg - 0.6Mn (2024-T3511) Stress-Relief Stretched and Straightened
SAE AMS4402-2017 Aluminum Alloy, Extruded Profiles (2024-T432) 4.4Cu - 1.5Mg - 0.6Mn Annealed, Stretch Formed, Solution Heat Treated and Stress Relieved by Stretching
SAE AMS4633A-2003 Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu 7.0Al 1.8Si Drawn and Stress Relieved (HR50)

International Organization for Standardization (ISO), Hesheng tensile instrument

ISO 12625-4:2016 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
ISO/DIS 7921 Ophthalmic optics and instruments — Near vision charts
ISO 9193:1990 Lawn and garden ride-on (riding) tractors; power take-off
ISO 12625-4:2022 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
ISO 17567:2020 Agricultural and forestry tractors and implements — Hydraulic power beyond
ISO 500:1979 Agricultural tractors — Power take-off and drawbar — Specification
ISO/TR 12369:1994 Agricultural tractors and machinery - Electrical power transmission connectors
ISO 789-2:1983 Agricultural tractors — Test procedures — Part 2: Hydraulic power and lifting capacity
ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification
ISO 789-2:1979 Title missing - Legacy paper document
ISO 5673:1993 Agricultural tractors and machinery; power take-off drive shafts and position of power-input connections
ISO 3783:1980 Paper and board; Determination of resistance to picking; Accelerating speed method using the IGT tester (Electric model)
ISO 17567:2005 Agricultural and forestry tractors and implements - Hydraulic power beyond
ISO 6292:2020 Powered industrial trucks and tractors — Brake performance and component strength
ISO 5676:2023 Tractors and machinery for agriculture and forestry — Hydraulic coupling — Braking circuit
ISO 4347:2015 Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths
ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
ISO/TR 12369:1994/Amd 1:1999 Agricultural tractors and machinery - Electric power transmission connector; Amendment 1
ISO 5673:1980 Agricultural tractors; Power take-off drive shafts for machines and implements
ISO 15253:2000 Ophthalmic optics and instruments - Optical devices for enhancing low vision
ISO 15253:2021 Ophthalmic optics and instruments - Optical and electro-optical devices for enhancing low vision
ISO/CD 11471 Agricultural tractors and machinery — Coding of remote hydraulic power services and controls
ISO 4347:2004 Leaf chains, clevises and sheaves - Dimensions, measuring forces and tensile strengths
ISO 3783:2006 Paper and board - Determination of resistance to picking - Accelerated speed method using the IGT-type tester (electric model)
ISO 15254:2009 Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision
ISO 15254:2002 Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision

Korean Agency for Technology and Standards (KATS), Hesheng tensile instrument

KS B ISO 17567:2021 Agricultural and forestry tractors and implements —Hydraulic power beyond
KS B ISO 17567-2014(2019) Agricultural and forestry tractors and implements – Hydraulic power beyond
KS M ISO 4624-2022 Paints and varnishes－Pull-off test for adhesion
KS M ISO 12625-4:2022 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
KS M ISO 4624-2017(2022) Paints and varnishes－Pull-off test for adhesion
KS B 7804-2007 Agricultural tractors and machinery－Electrical power transmission connectors
KS B 7804-2007(2017) Agricultural tractors and machinery－Electrical power transmission connectors
KS B 7804-2007(2022) Agricultural tractors and machinery－Electrical power transmission connectors
KS B ISO 5673:2002 Agricultural tractors and machinery－Power take－off drive shafts and position of power－input connection
KS M ISO 5893:2005 Rubber and plastics test equipment-Tensile, flexural and compression types(constant rate of traverse)-Specification
KS M ISO 5893:2015 Rubber and plastics test equipment－Tensile, flexural and compression types(constant rate of traverse)－Specification
KS M ISO 17236-2008(2018) Leather－Physical and mchanical tests－Determination of extension set
KS B 7776-2003 Agricultural tractors-Front and mid power take-off
KS B ISO OECD 789-10:2011 Agricultural tractors－Test procedures－Part 10：Hydraulic power at tractors/implement interface
KS C IEC 60601-2-66-2017(2022) Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
KS C IEC 60601-2-66:2017 Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
KS B ISO 5676-2002(2022) Tractors and machinery for agriculture and forestry－Hydraulic coupling－Braking circuit
KS B ISO 5676-2002(2017) Tractors and machinery for agriculture and forestry－Hydraulic coupling－Braking circuit
KS P ISO 8597-2006(2016) Optics and optical instruments－Visual acuity testing－Method of correlating optotypes
KS P ISO 8597-2023 Optics and optical instruments－Visual acuity testing－Method of correlating optotypes
KS T ISO 5048-2003(2018) Continuous mechanical handling equipment-Belt conveyors with carrying idlers-Calculation of operating power and tensile forces
KS B ISO 7072-2007 Tractors and machinery for agriculture and forestry－Linch pins and spring pins－Dimensions and requirements
KS P ISO 15254:2021 Ophthalmic optics and instruments — Electro-optical devices for enhancing low vision
KS P ISO 8597-2006(2021) Optics and optical instruments－Visual acuity testing－Method of correlating optotypes
KS B ISO 11471-2019 Agricultural tractors and machinery－Coding of remote hydraulic power services and controls
KS D 8512-2003 Method of determining the tensile strain hardening exponent for metallic sheet and strip
KS B ISO 10275:2009 Metallic materials－Sheet and strip－Determination of tensile strain hardening exponent

KR-KS, Hesheng tensile instrument

KS M ISO 4624-2017 Paints and varnishes－Pull-off test for adhesion
KS B ISO 17567-2021 Agricultural and forestry tractors and implements —Hydraulic power beyond
KS M ISO 12625-4-2022 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
KS B 7776-2003(2023) Agricultural tractors－Front and mid power take-off
KS B ISO 5673-2002 Agricultural tractors and machinery－Power take－off drive shafts and position of power－input connection
KS C IEC 60601-2-66-2017 Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
KS K 0521-2017(2022) Textiles－Tensile properties of fabrics－Determination of maximum force and elongation at maximum force using the strip method
KS K 0521-2023 Textiles — Tensile properties of fabrics — Determination of maximum force and elongation at maximum force: Strip method
KS P ISO 15254-2021 Ophthalmic optics and instruments — Electro-optical devices for enhancing low vision
KS B ISO 5395-2015 Power lawns-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments — Definitions, safety requirements and test procedures

ES-UNE, Hesheng tensile instrument

UNE-EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
UNE-EN ISO 12625-4:2023 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2022)
UNE-ISO 5675:2022 Agricultural tractors and machinery — General purpose quick-action hydraulic couplers
UNE-ISO 5676:2023 Tractors and machinery for agriculture and forestry — Hydraulic coupling — Braking circuit
UNE-EN 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements -- Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) (Endorsed by AENOR in November of 2010.)
UNE-EN IEC 62645:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Cybersecurity requirements (Endorsed by Asociación Española de Normalización in September of 2020.)

Japanese Industrial Standards Committee (JISC), Hesheng tensile instrument

JIS B 7602:2009 Calibration and test method for force-proving instruments
JIS G 0567:1998 Method of elevated temperature tensile test for steels and heat-resisting alloys
JIS G 0567:2012 Method of elevated temperature tensile test for steels and heat-resisting alloys
JIS D 6710:1994 Agricultural tractors -- Front and mid power take-off
JIS B 7721:2002 Verification and calibration of the force measuring system of the tension/compression testing machines

Institute of Electrical and Electronics Engineers (IEEE), Hesheng tensile instrument

IEEE Std 3001.8-2013 IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems

SAE - SAE International, Hesheng tensile instrument

SAE J722-1991 Power Take-Off Definitions and Terminology for Agricultural Tractors@ Recommended Practice
SAE J722-1972 Power Take-Off Definitions and Terminology for Agricultural Tractors
SAE J873-1995 Drag Force Test Procedure for Construction, Forestry, and Industrial Machines
SAE J873-2007 Drag Force Test Procedure for Construction@ Forestry@ and Industrial Machines
SAE J873-1986 Drag Force Test Procedure for Construction@ Forestry@ and Industrial Machines
SAE USCAR11-1998 Torque-Tension Testing and Evaluation of Fastener Finishes
SAE AS445-1961 Fuel and Oil Quantity Instruments (Turbine Powered Subsonic Aircraft)
SAE J709-2009 Agricultural Tractor Tire Loadings@ Torque Factors@ and Inflation Pressures
SAE AMS4163F-2017 Aluminum Alloy@ Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated@ Stress-Relieved by Stretching@ and Straightened (UNS A92219)
SAE AMS4068F-2015 Aluminum Alloy@ Drawn Seamless Tubing 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated and Stress Relieved by Stretching (UNS A92219)
SAE AMS4068C-1997 Aluminum Alloy@Drawn Seamless Tubing@ 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219- T3511) Solution Heat Treated and Stress Relieved by Stretching (UNS A92219)
SAE AMS4163C-1998 Aluminum Alloy@ Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated@ Stress-Relieved by Stretching@ and Straightened (UNS A92219)
SAE AMS4367-2016 Aluminum Alloy@ Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T74511) Solution Heat Treated@ Stress Relieved by Stretching@ Straightened@ and Overaged
SAE AMS4068B-1988 Aluminum Alloy Tubing@ Seamless@ Drawn 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219- T3511) Solution Heat Treated and Stress Relieved by Stretching (UNS A92219)

Danish Standards Foundation, Hesheng tensile instrument

DS/EN ISO 4624:2003 Paints and varnishes - Pull-off test for adhesion
DS 2198:1984 Furniture and furnishing. Drawers. Determination of Push-in force and durability
DS 6009:1980 Agricultural tractors. Power take-off and drawbar. Specification
DS/ISO 5675:2021 Agricultural tractors and machinery – General purpose quick-action hydraulic couplers
DS/EN 14977:2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Hesheng tensile instrument

GB/T 5210-2006 Paints and varnishes. Pull-off test for adhesion
GB/T 20344-2006 Agricultural tractors and machinery.Electrical power transmission connectors
GB/T 43740-2024 Atomic gravimeter performance requirements and test methods
GB/T 17200-2008 Technical specification for tensile, compression and flexural testing machines for rubber an plastics (constant rate of traverse)
GB/T 6074-2006 Leaf chains,clevises and sheaves.Dimensions,measuring forces and tensile strengths
GB/T 1592-2003 Agricultural tractors--Rear-mounted power take-off-types 1,2 and 3
GB/T 17122-1997 Lawn and garden ride-on (riding) tractors--Power take-off
GB/T 4830-2015 Industrial process measurement and control instruments.Pressure range and quality of air supply
GB/T 16825.1-2002 Verification of static uniaxial testing machines--Part 1: Tension/compression testing machines--Verification and calibration of the force-measuring system
GB/T 16825.1-2008 Inspection of static uniaxial testing machines - Part 1: Inspection and calibration of force measuring systems of tensile and/or compressive testing machines
GB/T 6961-2003 Operating requirements for tractors power take-off and drawbars
GB/T 43925-2024 Full-scale tensile stress corrosion test method for casing and tubing
GB/T 3690-2009 Textile conveyor belts-Full thickness tensile strength,elongation at break and elongation at the reference load-Test method
GB/T 2778-2007 Agricultural tractor power take-off pulley peripheral speed and width
GB/T 2778-1992 Power take-off pulley for agricultural tractors--Peripheral speed and width
GB/T 17126-1997 Agricultural tractors and machinery--Power take-off drive shafts and position of power-input connection

ANSI - American National Standards Institute, Hesheng tensile instrument

B71.1-1972 Safety specifications for power lawn mowers@ lawn and garden tractors@ and lawn tractors (OPEI)
B71.1-1980 Safety specifications for power lawn mowers@ lawn and garden tractors@ and lawn tractors (OPEI)

American Society of Mechanical Engineers (ASME), Hesheng tensile instrument

ASME PTC 19.2-1987 Instruments and apparatus - Part 2: Pressure measurement
ASME SEC VIII D3 ART KT-4-2001 Article KT-4 Pressure Test Gages and Transducers
ASME PTC 19.7-1980 Part 7: Measurement of Shaft Power Instruments and Apparatus

CU-NC, Hesheng tensile instrument

NC 90-02-1971 Terms, definitions and units. Pressure measuring instruments
NC 43-14-1968 Particle boards and fibre boards Tensile strength perpendicular to the surface
NC 42-36-1987 Paper and Board Industry Tensile Breaking Strength Testing Method
NC 43-13-1968 Particle boards and fibre boards Tensile strength parallel to the surface
NC 42-34-1987 Paper and Board Industry Tensile Breaking Strength after Water Immersion Testing Methods

GOSTR, Hesheng tensile instrument

GOST R 58719-2019 United power system and isolated power systems. Hydraulic power stations. Hydraulic engineering structures. Instrumentation and measuring systems and devices. Terms of creation. Standards and norms

IPC - Association Connecting Electronics Industries, Hesheng tensile instrument

IPC TM-650 2.4.53-2017 Dye and Pull Test Method (Formerly Known as Dye and Pry)

American Concrete Institute, Hesheng tensile instrument

ACI 408R-2003 Bond and Development of Straight Reinforcing Bars in Tension

RO-ASRO, Hesheng tensile instrument

STAS 8802-1986 Tractors and agricultural machines POWER TAKE-OFF AXLE STUBS AND POWER RECEIVERS Types and dimensions
STAS 11392-1980 Tests of roll welding joints TENSILE AND SHEARING TEST
STAS SR ISO 7641-1:1994 Road vehicles - Caravans and light trailers- Calculation of the mechanical strength of the drawbar - Part 1: Steel drawbars
STAS 10519-1976 VULCANIZED RUBBERS Determination of tension set under constant elongation, at normal and high temperatures

GM North America, Hesheng tensile instrument

GM GMN7152-2002 Specification and Verification of Tensile and Fatigue Properties in Cast Components

Lithuanian Standards Office , Hesheng tensile instrument

LST EN ISO 4624:2003 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002)
LST EN 14977-2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test

ESDU - Engineering Sciences Data Unit, Hesheng tensile instrument

ESDU 83002-1982 Allowable stresses for helical compression and tension springs of round wire.
ESDU 82008 B-1991 Elastic stresses and deflections of helical compression and tension springs of round wire.
ESDU 72014-1972 Determination of the principal stresses and strains in a plane stress field from strain gauge data.
ESDU 79016-1979 INELASTIC SHEAR STRESSES AND STRAINS IN THE ADHESIVES BONDING LAP JOINTS LOADED IN TENSION OR SHEAR

Anhui Provincial Standard of the People's Republic of China, Hesheng tensile instrument

DB34/T 3585-2020 Construction guidelines for prestressed tensioning and channel grouting of bridges

International Electrotechnical Commission (IEC), Hesheng tensile instrument

IEC 60601-2-66:2012 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
IEC 60601-2-66:2015 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
IEC 63096:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Security controls

CZ-CSN, Hesheng tensile instrument

CSN 63 1205-1987 Diagonál tyres for agrioultural machinery and tractors. JJiniBiisions and load eapaeitios.
CSN ISO 9193:1993 Lawn and garden ride-on (riding) tractors. Power take-off
CSN ISO 7741:1994 Instruments for surgery - Scissors and shears - General requirements and test methods

Standard Association of Australia （SAA）, Hesheng tensile instrument

AS ISO 6292:2015 Powered industrial trucks and tractors — Brake performance and component strength
AS 1580.408.5:2006 Paints and related materials - Methods of test - Adhesion - Pull-off test
AS 1121.2:2007 Agricultural tractor power take-offs - Rear-mounted power take-off types 1, 2 and 3 - Narrow-track tractors, dimensions for master shield and clearance zone

PK-PSQCA, Hesheng tensile instrument

PS 599-1978 SPECIFICATION FOR HARD-DRAWN COPPER AND COPPER-CADMIUM CON-DUCTORS FOR OVERHEAD POWER TRANSMISSION PURPOSES.

CH-SNV, Hesheng tensile instrument

SN 565 381/2-1988 Mineral oil productsQuality directions for unleaded automobil fuels

GM Holden Ltd, Hesheng tensile instrument

HOLDEN HN 1688-2013 BODY AND FASCIA PAINT MATERIALS PRODUCTABILITY SIMULATION
HOLDEN HN 1688-2008 BODY AND FASCIA PAINT MATERIALS PRODUCTABILITY SIMULATION

BE-NBN, Hesheng tensile instrument

NBN 266-1953 Copper and copper alloys for everyday use in forged products that are drawn, rolled and pressure drawn. Classification

(U.S.) Telecommunications Industries Association , Hesheng tensile instrument

TIA-455-28-C-1999 FOTP-28 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Tension

Professional Standard - Ferrous Metallurgy, Hesheng tensile instrument

YB/T 4287-2012 Metallic materials.Sheet and strip.Testing method for drawbead restraining force

IN-BIS, Hesheng tensile instrument

IS 12224-1987 Test method for hydraulic power and lifting capacity of agricultural tractors
IS 12036-1987 Agricultural tractor power output and pulley performance test methods

AIA/NAS - Aerospace Industries Association of America Inc., Hesheng tensile instrument

NAS1465-1472-2012 PIN@ SWAGE@ LOCKING@ STEEL@ STANDARD AND OVERSIZE@ PROTRUDING HEAD@ TENSION@ PULL-TYPE (Rev 3)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Hesheng tensile instrument

GB/T 3690-2017 Textile conveyor belts—Full thickness tensile strength,elongation at break and elongation at the reference load—Test method

Aerospace Industries Association/ANSI Aerospace Standards, Hesheng tensile instrument

AIA/NAS NAS2125-2132-2012 BOLT, LOCK, TENSION, 100° CROWN HEAD, STANDARD AND OVERSIZE, PULL-TYPE, TITANIUM ALLOY

BELST, Hesheng tensile instrument

STB 1024-96 Gear wheels of power transmission for tractors and agricultural machines. General specifications

ZA-SANS, Hesheng tensile instrument

SANS 10275:2009 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent

European Committee for Electrotechnical Standardization（CENELEC）, Hesheng tensile instrument

EN IEC 62645:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Cybersecurity requirements

VDI - Verein Deutscher Ingenieure, Hesheng tensile instrument

VDI/VDE 2650 Blatt 6-2005 Requirements regarding self-monitoring and diagnosis in field instrumentation - Pressure measurement