ZH
RU
ES

polar and non-polar

polar and non-polar, Total:499 items.

In the international standard classification, polar and non-polar involves: Soil quality. Pedology, Civil engineering in general, Farming and forestry, Surface treatment and coating, Welding, brazing and soldering, Corrosion of metals, Galvanic cells and batteries, Lighting, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Fluid storage devices, Earthworks. Excavations. Foundation construction. Underground works, Power transmission and distribution networks, Electronic tubes, Rotating machinery, Materials for aerospace construction, Burners. Boilers, Aircraft and space vehicles in general, Medical equipment, Road vehicle systems, Rubber and plastics products, Lamps and related equipment, Electronic display devices, Integrated circuits. Microelectronics, Semiconductor devices, Electromagnetic compatibility (EMC), Information technology (IT) in general, Edible oils and fats. Oilseeds, Gas and steam turbines. Steam engines, Testing of metals, Conducting materials, Cutting tools, Insulating fluids, Water quality, Optoelectronics. Laser equipment, Production of metals, Sensory analysis, Non-ferrous metals, Quality, Vocabularies, CHEMICAL TECHNOLOGY, Coatings and related processes used in aerospace industry, Products of non-ferrous metals, Electrical engineering in general, Lubricants, industrial oils and related products, Analytical chemistry, Electrical accessories, Capacitors, Shipbuilding and marine structures in general, Protective equipment, Paints and varnishes, Petroleum products in general, Compressors and pneumatic machines, Non-metalliferous minerals, Air quality, Electricity. Magnetism. Electrical and magnetic measurements, Construction materials, Thermodynamics and temperature measurements, Audio, video and audiovisual engineering, Wastes, Agricultural machines, implements and equipment, Fluid power systems, Animal feeding stuffs, Switchgear and controlgear, Waxes, bituminous materials and other petroleum products, Mechanical testing, Equipment for the metallurgical industry, Products of the chemical industry, Aerospace electric equipment and systems, Small craft, Vacuum technology, Radiation measurements.


Japanese Industrial Standards Committee (JISC), polar and non-polar

  • JIS A 1205:1999 Test method for liquid limit and plastic limit of soils
  • JIS A 1205:2009 Test method for liquid limit and plastic limit of soils
  • JIS A 1206:1970 Method of test for plastic limit of soils
  • JIS C 7223:1978 Reliability assured voltage regulator diodes and voltage reference diodes
  • JIS H 8682-2:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings.Part 2: Abrasive jet abrasion resistance test
  • JIS C 7221:1978 Reliability assured small signal diodes
  • JIS H 8684:2013 Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • JIS T 0302:2000 Testing method for corrosion resistance of metallic biomaterials by anodic polarization measurement
  • JIS C 8159-2:2013 Non-integrated linear LED lamps with GX16t-5 cap for general lighting services.Part 2: Performance requirements
  • JIS H 8682-1:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings .Part 1: Abrasive-wheel-wear abrasion resistance test
  • JIS H 8689:2013 Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
  • JIS C 7222:1978 Reliability assured low current rectifier diodes
  • JIS C 7224:1980 Reliability assured low current switching diodes
  • JIS C 7225:1982 Reliability assured rectifier diodes (medium and high current)

Society of Automotive Engineers (SAE), polar and non-polar

Military Standards (MIL-STD), polar and non-polar

Natural Gas Processor's Association (NGPA), polar and non-polar

  • GPA RR-3-1971 Enthalpy and Entropy of Non-Polar Liquids at Low Temperatures

Professional Standard - Agriculture, polar and non-polar

  • NY/T 1860.13-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 13:Miscibility with hydrocarbon oil
  • NY/T 1860.13-2010 Guidance on the determination of physico-chemical properties for pesticides.Part 13:Miscibility with hydrocarbon oil

ECIA - Electronic Components Industry Association, polar and non-polar

  • RS-348-1968 Magnetic Field Polarity@ Including Definitions and Determination of Polarity
  • 535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads@ Insulated
  • TEP197-A-1997 Preparation of X-Radiation Characteristic Curves for Cathode Ray Tubes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, polar and non-polar

HU-MSZT, polar and non-polar

Electronic Components, Assemblies and Materials Association, polar and non-polar

  • ECA RS-348-1968 Magnetic Field Polarity, Including Definitions and Determination of Polarity
  • ECA 348-1968 Magnetic Field Polarity, Including Definitions and Determination of Polarity

PH-BPS, polar and non-polar

  • PNS ISO 6848:2021 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification

Danish Standards Foundation, polar and non-polar

  • DS/EN ISO 6848:2005 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification
  • DS/EN 2284:1991 Aerospace series. Sulphuric acid anodizing of aluminium and wrought aluminium alloys
  • DS/EN 2310:1991 Aerospace series. Test methods for the flame resistance rating of non-metallic materials
  • DS/ISO/TS 28581:2012 Water quality - Determination of selected non-polar substances - Method using gas chromatography with mass spectrometric detection (GC-MS)
  • DS/EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • DS/EN ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
  • DS/EN ISO 8420/AC:2008 Animal and vegetable fats and oils - Determination of content of polar compounds
  • DS/EN ISO 8420:2002 Animal and vegetable fats and oils - Determination of content of polar compounds
  • DS/ISO 2085:1988 Anodizing of aluminium and its alloys. Check of continuity of thin anodic oxide coatings. Copper sulphate test

GOSTR, polar and non-polar

  • GOST ISO 6848-2020 Arc welding and cutting. Nonconsumable tungsten electrodes. Classification

Association Francaise de Normalisation, polar and non-polar

  • NF A81-011*NF EN ISO 6848:2015 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification
  • NF EN ISO 8251:2018 Anodisation de l'aluminium et de ses alliages - Détermination de la résistance à l'abrasion des couches d'oxyde anodiques
  • XP T90-145*XP ISO/TS 28581:2012 Water quality - Determination of selected non-polar substances - Method using gas chromatography with mass spectrometric detection (GC-MS)
  • NF A91-491:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings.
  • NF A91-491*NF EN ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • NF A91-450*NF EN ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium
  • NF EN ISO 2085:2018 Anodisation de l'aluminium et de ses alliages - Contrôle de la continuité des couches anodiques minces - Essai au sulfate de cuivre
  • NF P94-051:1993 Soil : inverstigation and testing. Determination of Atterberg's limits. Liquid limit test using cassagrande apparatus. Plastic limit test on rolled thread.
  • XP ISO/TS 28581:2012 Qualité de l'eau - Détermination de substances non polaires selectionnées - Méthode par chromatographie en phase gazeuse avec détection par spectrométrie de masse (CG-SM)
  • NF A91-479*NF EN ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
  • NF C64-101:1976 A.C.high-voltage switchgear and control gear. Three-pole circuit-breakers. Characteristics.
  • NF C97-195*NF EN 61213:1994 Analogue audio recording on video tape. Polarity of magnetization.
  • NF EN 61213:1994 Enregistrement audio-analogique sur bande vidéo - Polarité de magnétisation.
  • NF A91-479:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test.
  • NF T60-248*NF EN ISO 8420:2002 Animal and vegetable fats and oils - Determination of content of polar compounds
  • NF T60-248:1995 Animal and vegetable fats and oils. Determination of polar compounds content.
  • NF M07-099:2000 Émulsions eau dans gazole - Détermination de la température limite de filtrabilité

Korean Agency for Technology and Standards (KATS), polar and non-polar

  • KS B ISO 6848-2016(2021) Arc welding and cutting－Nonconsumable tungsten electrodes－Classification
  • KS C 7801-2007 Fluorescent induction lamps－Performance requirements
  • KS C 5205-1980(2000) RELIABILITY ASSURED VOLTAGE REGULATOR DIODES AND VOLTAGE REFERENCE DIODES
  • KS C 5205-2002 RELIABILITY ASSURED VOLTAGE REGULATOR DIODES AND VOLTAGE REFERENCE DIODES
  • KS H ISO 8420-2003(2018)
  • KS D 7029-2022 Tungsten electrodes for inert gas shielded arc welding
  • KS C 5203-1980(2000) RELIABILITY ASSURED SMALL SIGNAL DIODES
  • KS D 7029-1992 Tungsten electrodes for inert gas shielded arc welding
  • KS D 7029-1981 Tungsten electrodes for inert gas shielded arc welding
  • KS C 5203-1980 RELIABILITY ASSURED SMALL SIGNAL DIODES
  • KS C 5203-2002 RELIABILITY ASSURED SMALL SIGNAL DIODES
  • KS D 7029-2017 Tungsten electrodes for inert gas shielded arc welding
  • KS C 5213-1981(1997) RELIABILITY ASSURED LOW CURRENT SWITCHING DIODES
  • KS C 5213-1981 RELIABILITY ASSURED LOW CURRENT SWITCHING DIODES
  • KS D ISO 3211:2012 Anodizing of aluminium and its alloys-Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • KS D ISO 3211:2013 Anodizing of aluminium and its alloys－Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • KS C 7104-2005 Standard of measuring the performance of light emitting diodes
  • KS C IEC 61213:2007 Analogue audio recording on video tape－Polarity of magnetization
  • KS H ISO 8420:2003 Animal and vegetable fats and oils－Determination of content of polar compounds
  • KS F 2303-2000 Test method for liquid limit and plastic limit of soils
  • KS C 5204-1980(2000) RELIABILITY ASSURED LOW CURRENT RECTIFIER DIODES
  • KS C 5217-1983(1998) RELIABILITY ASSURED RECTIFIER DIODES (MEDIUM AND HIGH CURRENT)
  • KS C 7104-2005(2020) Standard of measuring the performance of light emitting diodes
  • KS V 9512-2016 Installation and performance requirement of heated walkway for polar region environment
  • KS C 5204-1980 RELIABILITY ASSURED LOW CURRENT RECTIFIER DIODES
  • KS B ISO 4400:2002 Fluid power systems and components-Three-pin electrical plug connectors with earth contact-Characteristics and requirements
  • KS D 7029-2002 Tungsten electrodes for inert gas shielded arc welding
  • KS D 0235-2003 Laboratory test method of sacrificial anodes for cathodic protection
  • KS C 5204-2002 RELIABILITY ASSURED LOW CURRENT RECTIFIER DIODES
  • KS C 5213-2002 RELIABILITY ASSURED LOW CURRENT SWITCHING DIODES
  • KS V 9511-2016 Installation and performance requirement of heated handrail for polar region environment
  • KS C IEC 61213-2007(2022) Analogue audio recording on video tape－Polarity of magnetization
  • KS F 2339-2007 Testing method for nonrepetitive static plate load tests of soils and flexible pavement components for use in evaluation and design of airport and highway pavements
  • KS F 2339-1982 Testing method for nonrepetitive static plate load tests of soils and flexible pavement components for use in evaluation and design of airport and highway pavements
  • KS B 0895-2001 USABILITY OF COATED ELECTRODES FOR WELDING MILD STEEL
  • KS C 5217-2002 RELIABILITY ASSURED RECTIFIER DIODES (MEDIUM AND HIGH CURRENT)
  • KS V 9511-2016(2021) Installation and performance requirement of heated handrail for polar region environment
  • KS W ISO 1467-2002(2012) General purpose push-pull single-pole circuit-breakers for aircraft－Performance requirements
  • KS V 9512-2016(2021) Installation and performance requirement of heated walkway for polar region environment
  • KS W ISO 1509-2002(2012) General purpose push-pull three-pole circuit-breakers for aircraft－Performance requirements
  • KS C 5217-1983 RELIABILITY ASSURED RECTIFIER DIODES (MEDIUM AND HIGH CURRENT)
  • KS B ISO 1607-2:2004 Positive-displacement vacuum pumps-Measurement of performance characteristics- Part 2:Measurement of ultimate pressure
  • KS B ISO 1607-2:2013 Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure

KR-KS, polar and non-polar

  • KS B ISO 6848-2016 Arc welding and cutting－Nonconsumable tungsten electrodes－Classification
  • KS D ISO 3211-2012 Anodizing of aluminium and its alloys－Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • KS M 1077-2008(2023) Determination of lead and cadmium in anode active substance for lithium cell

German Institute for Standardization, polar and non-polar

  • DIN EN ISO 6848:2015-12 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015); German version EN ISO 6848:2015
  • DIN 41077:1980 Two-pole plug for polarized secondary clocks; connecting dimensions
  • DIN 18122-1:1997 Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit
  • DIN EN ISO 8251:2018-12 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018); German version EN ISO 8251:2018
  • DIN EN ISO 7599:2018-05 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018); German version EN ISO 7599:2018
  • DIN EN ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
  • DIN EN ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
  • DIN EN 61213:1994 Analogue audio recording on video tape; polarity of magnetization (IEC 61213:1993); German version EN 61213:1994
  • DIN EN ISO 2085:2018-12 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018); German version EN ISO 2085:2018
  • DIN 4000-18:1988-12 Tabular layouts of article characteristics for semiconductor diodes
  • DIN EN ISO 8420:2002-08 Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002); German version EN ISO 8420:2002
  • DIN EN ISO 8420 Berichtigung 1:2008-06 Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002); German version EN ISO 8420:2002, Corrigendum to DIN EN ISO 8420:2002-08; German version EN ISO 8420:2002/AC:2008
  • DIN 25482-3:1993 Limit of detection and limit of decision for nuclear radiation measurements; measurement by use of linear analog ratemeters

ES-UNE, polar and non-polar

  • UNE-EN ISO 6848:2015 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)
  • UNE-EN 61965:2003 Mechanical safety of cathode ray tubes (Endorsed by AENOR in May of 2004.)
  • UNE-EN ISO 8251:2019 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
  • UNE-EN ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
  • UNE-EN ISO 2085:2019 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
  • UNE-EN ISO 8420:2002/AC:2008 Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002/Cor 1:2004)
  • UNE-EN 61213:1993 ANALOGUE AUDIO RECORDING ON VIDEO TAPE. POLARITY OF MAGNETIZATION. (Endorsed by AENOR in December of 1995.)

Taiwan Provincial Standard of the People's Republic of China, polar and non-polar

  • CNS 13521-1995 Method of Test of Sacrificial Anodes Used for Cathodic Protection
  • CNS 13902-1997 Expression of the properties of cathode-ray oscilloscopes
  • CNS 13903-1997 Expression of the properties of storage cathode-ray oscilloscopes
  • CNS 12375-1988 Method of Test for Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
  • CNS 12260-1988 Method of Test for Oxidation Characterisrics of Extreme-Pressure Lubricating Oils
  • CNS 14185-1998 Method of test for toughness and tenacity of bituminous materials

Group Standards of the People's Republic of China, polar and non-polar

  • T/ZZB 1302-2019 Water-based binders on cathode / anode in lithium-ion batteries
  • T/EES 005-2023 Technical requirement of four poles homopolar hybrid magnetic bearings for electric machines
  • T/ZZB 1436-2019 Multipole magnetic rubber encoders
  • T/ZS 0310-2022 Extreme pressure lubricants for metalworking
  • T/ZZB 2263-2021 Non-polar DC relays for charging station
  • T/QGCML 030-2020 Conventional Electrical Standards for Diode Diffusion Sheets
  • T/YH 1013-2020 Requirements for the polarity test of satellite control subsystem
  • T/ZZB 0542-2018 Disposable high frequency active electrode surgical instrument (active electrode is intended to coagulate or cut )
  • T/JSQA 011-2020 ERNiCrFe-7G nickel-based welding wire for gas tungsten arc welding

CZ-CSN, polar and non-polar

  • CSN 75 7505-1998 Water quality - Determination of non-polar extractable matters by IR spectrometric method
  • CSN 36 4175-1965 Alkaline mercury cells and batteries
  • CSN 03 8151-1961 The determination for sealing of anodically coated aluminium
  • CSN 42 0345-1987 Metal testing. Testing of proportional limit of tensile strength
  • CSN 01 0222-1978 Applied statistics. Significance tests for extreme values
  • CSN 75 7952-1987 Chomical and physical analysia of sludges. Determmation of oil products — — non-polar hydroearbons
  • CSN ISO 3211:1993 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxide coatings to cracking by deformation
  • CSN 05 5160-1975 Elektrodes for welding-on layera of special properties. Technical delivery code
  • CSN ISO 8420:1994 Animal and vegetables fats and oils.Determination of polar compounds content
  • CSN ISO 6581:1993 Anodizing of aluminium and its alloys. Determinatíon of the fastness to ultra-violet light of coloured anodk oxide coatings

未注明发布机构, polar and non-polar

  • BS 7310:1990(2012) Specification for Ion - selective electrodes, reference electrodes, combination electrodes and ion - selective electrode meters for determination of ions in solution
  • SAE AMS2466C-2018 Hard Anodic Coating of Magnesium Alloys Alkaline Type, High Voltage
  • BS EN ISO 8420:2002(2008) Animal and vegetable fats and oils — Determination of content ofpolar compounds

General Motors Corporation (GM), polar and non-polar

The Aluminum Association, polar and non-polar

Lithuanian Standards Office , polar and non-polar

  • LST EN ISO 6848:2005 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2004)
  • LST EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011)
  • LST EN 61965-2004 Mechanical safety of cathode ray tubes (IEC 61965:2003)
  • LST EN 61213-2001 Analogue audio recording on video tape. Polarity of magnetization (IEC 61213:1993)
  • LST EN ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2010)

(U.S.) Ford Automotive Standards, polar and non-polar

  • FORD WSS-M2P182-A-2021 PERFORMANCE, PRIMER COATING, WATERBORNE CATHODIC ELECTROCOAT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M2D228-A-2004 SILICONE ELASTOMER, VERY LOW STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M2D228-A-2009 SILICONE ELASTOMER, VERY LOW STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2P182-A-2003 PERFORMANCE, PRIMER COATING, WATERBORNE CATHODIC ELECTROCOAT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4P13-A-2014 ANODIZED ALUMINUM PERFORMANCE, DECORATIVE EXTERIOR TRIM ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD FLTM EU-AQ 006-03-2001 DETERMINATION OF THE QUALITY OF SEALING OF ANODISED ALUMINUM
  • FORD WSK-M64J29-A2-2012 MAKEUP FEED, WATERBORNE CATHODIC ELECTROCOAT, RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M64J29-A1

Professional Standard - Chemical Industry, polar and non-polar

  • HG/T 4592-2014 Electrode active coating of dimensionally stable anode electrolyzer use membrane method

American Society for Testing and Materials (ASTM), polar and non-polar

  • ASTM D4318-00 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D4318-10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D6558-00a(2005) Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6558-00(2010) Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM E1697-95(1999) Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
  • ASTM E1697-05(2020) Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
  • ASTM D6558-00a(2010) Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D4127-06 Standard Terminology Used with Ion-Selective Electrodes
  • ASTM D4127-12 Standard Terminology Used with Ion-Selective Electrodes
  • ASTM D6559-00a(2005) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6559-00a(2010) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM E81-96(2007) Standard Test Method for Preparing Quantitative Pole Figures
  • ASTM E81-96(2011) Standard Test Method for Preparing Quantitative Pole Figures
  • ASTM D6559-00A(2016)e1 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6558-22 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6559-22 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D6558-00A(2015)e1 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • ASTM D4318-17 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • ASTM B136-84(1998) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • ASTM D6745-22 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM B136-84(2018) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • ASTM E857-05e1 Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
  • ASTM E857-05 Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
  • ASTM E857-87(1997) Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
  • ASTM E857-05(2012) Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
  • ASTM D6745-06(2011) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D6745-01 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D2893-03 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
  • ASTM D6745-06 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D2893-04(2009) Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
  • ASTM D6745-11 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D6745-11(2015) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • ASTM D2893-19 Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

SE-SIS, polar and non-polar

  • SIS SS 02 71 21-1990 Geotechnical tests — Plastic limit
  • SIS SS-ISO 2128:1984 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxide coatings - Non-destructive mea- surement by split-beam microscope
  • SIS SS 11 70 30-1980 Anodizing of aluminium and its alloys — Determination of thickness of anodic oxide coatings — Non-destructive measure ment by split-beam microscope
  • SIS SS-ISO 6581:1985 Anodizing of aluminium and its alloys - Determination of the fastness to ultra-violet light of coloured anodic oxide coatings

RO-ASRO, polar and non-polar

  • STAS 1913/4-1986 Foundation ground DETERMINATION OF PLASTIC LIMITS
  • STAS 7043/3-1986 Non-metallic coatings (inorganic) ANOD1ZING OF ALUMINIUAI AND ITS ALLOYS Chccking of continuity of coating
  • STAS 11200/5-1978 Graphical symbols GRAPHICAL SYMBOL FOR PLUS; POSITIVE POLARITY
  • STAS 11200/6-1978 Graphical symbols GRAPHICAL SYMBOL FOR MINUS ; NEGATIVE POLARITY
  • STAS 1916-1964
  • STAS 10316-1975 DIESEL ENGINE FUELS Determination of the limit point of filtrability
  • STAS 8100/3-1988 LIMITS AND FITS SYSTEM FOR LINEAR DIMENSIONS General use tolerance classes for dimensions up to 3150 mm
  • STAS 11286-1989 SCALES AND SIZES FOR PLOTTING FREQUENCY CHARACTERISTICS AND POLAR DIAGRAMS
  • STAS 12123/3-1983 Semiconductor devices VOLTAGE REFERENCE DIODES AND VOLTAGE REGULATOR DIODES Measuring methodes for electrical characteristics
  • STAS 11102-1978 CARBONACEOUS MASS FOR CONTINUOUS ELECTRODES Plasticity determination
  • STAS 11200/461-1981 Graphical symbols GRAPHICAL SYMBOL FOR MIG/MAG-WELDING
  • STAS 12123/2-1983 Semiconductor devices LOW POWER SIGNAL DIODES, INCLUDING SWITCHING DIODES Measuring methods for electrical characteristics
  • STAS 8100/4-1988 LIMITS AND FITS SYSTEM FOR LINEAR DIMENSIONS General use tolerance classes selection for dimensions up to 500 mm

Standard Association of Australia （SAA）, polar and non-polar

  • ENA Doc 011-2006 Pole supply and performance specification
  • AS EN 12470.3:2004 Clinical thermometers - Performance of compact electrical thermometers (non-predictive and predictive) with maximum device

Professional Standard - Electron, polar and non-polar

  • SJ 1390-1978 Methods of measurement for nonliearity factor of excess noise power of noise-generator diodes

British Standards Institution (BSI), polar and non-polar

  • BS EN ISO 6848:2015 Tracked Changes. Arc welding and cutting. Nonconsumable tungsten electrodes. Classification
  • BS EN 62639:2012 Fluorescent induction lamps. Performance specification
  • BS EN 55022:1998 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
  • BS EN ISO 8251:2011 Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
  • BS EN ISO 7599:2018 Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
  • BS EN 12373-15:2001 Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • BS 3504:1962 Specification for magnesium-activated nickel for cathodes of electronic tubes and valves
  • BS 9073 N0034:1978 Detail specification for fixed tantalum electrolytic capacitors - Porous anode, polar non-solid electrolyte - Tubular insulated metallic case, PTFE/elastomer seal, axial wire terminations - Full plus additional assessment level
  • BS EN 1263-2:2002 Safety nets - Safety requirements for the positioning limits
  • BS EN ISO 3211:2010 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • BS EN 26848:1991 Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding
  • BS EN 12373-16:2001 Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
  • BS EN ISO 8251:2018 Tracked Changes. Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
  • BS EN 61000-3-3:1995 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection
  • BS EN ISO 2085:2010 Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
  • BS EN 61213:1994 Analogue audio recording on video tape. Polarity of magnetization
  • BS PD IEC/TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
  • BS EN ISO 9692-3:2001 Welding and allied processes. Joint preparation. Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
  • PD ISO/TS 28581:2012 Water quality. Determination of selected non-polar substances. Method using gas chromatography with mass spectrometric detection (GC-MS)
  • BS EN 12384:1999 Copper and copper alloys - Determination of spring bending limit on strip
  • BS EN 12384:1999(2000) Copper and copper alloys - Determination of spring bending limit on strip
  • BS EN 55017:2011 Methods of measurement of the suppression characteristics of passive EMC filtering devices
  • BS EN ISO 19009:2015 Small craft. Electric navigation lights. Performance of LED lights
  • BS ISO 22426:2020 Assessment of the effectiveness of cathodic protection based on coupon measurements
  • BS EN ISO 3211:2018 Tracked Changes. Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • BS CECC 30201 001:1981 Harmonized detail specification for fixed tantalum capacitors - Porous anode, solid electrolyte - Cylindrical insulated/non-insulated metallic case, polar/hermetic seal, axial terminations - Basic plus additional assessment level
  • BS ISO 12987:2005 Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method

Defense Logistics Agency, polar and non-polar

Indonesia Standards, polar and non-polar

  • SNI 05-4006-1996 Eddy current examination method for installed nonferromagnetic heat exchanger tubing.

YU-JUS, polar and non-polar

  • JUS A.A4.302-1990 Tabular layouts ofarticle characteristics for semiconductor diodes
  • JUS C.T7.241-1977 Atiodic oxidation of ahtminium and aluminium alloys. Assessment of resistance of anodic coatings to cracking by deformation
  • JUS N.R1.101-1977 Electronic tubes. Measurements of the eletricalproperties. Measurement ofelectrode current
  • JUS N.R1.171-1988 TV colaur cathode ray tubes, type 30AX. Mechanical characteristics

United States Navy, polar and non-polar

Professional Standard - Medicine, polar and non-polar

GM North America, polar and non-polar

国家市场监督管理总局、中国国家标准化管理委员会, polar and non-polar

  • GB/T 38348-2019 Multipole magnetic rubber encoders
  • GB/T 39280-2020 Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels
  • GB/T 13083-2018 Determination of fluorine in feeds—Ion selective electrode method
  • GB/T 24488-2021 Test method for electrochemical properties of magnesium alloys sacrificial anode
  • GB/T 38621-2020 Transient thermal test method for light emitting diode modules

American National Standards Institute （ANSI), polar and non-polar

AENOR, polar and non-polar

  • UNE 103104:1993 TEST FOR PLASTIC LIMIT OF A SOIL.
  • UNE 51014:1979 MEASUREMENT OF THE PROPERTIES OF EXTREME PRESSURE OF LUBRICATING PRODUCTS
  • UNE-EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011)
  • UNE 21353-1:1979 EXPRESSION OF THE PROPERTIES OF CATHODE-RAY OSCILLOSCOPES. GENERAL.

U.S. Military Regulations and Norms, polar and non-polar

Association of German Mechanical Engineers, polar and non-polar

U.S. Air Force, polar and non-polar

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, polar and non-polar

  • GB/T 26186-2010 Cold cathode fluorescent lamps service.Performance requirements
  • GB/T 15825.8-1995 Sheet metal formability and test methods--Forming limit diagram (FLD) test
  • GB/T 3074.3-2008 Method for the determination of the oxidation resistance of graphite electrodes
  • GB/T 5295-2012 The spectral response characteristic series of photocathodes
  • GB/T 3074.3-1982 Method for determination of the oxidation resistance of graphite electrodes
  • GB/T 3074.2-2008 Method for the determination of the elastic modulus of graphite electrodes
  • GB 5295-1985 The spectral response characteristic series of photocathodes
  • GB/T 3074.2-1982 Method for determination of the elastic modulus of graphite electrodes
  • GB/T 5295-1985 The spectral response characteristic series of photocathodes
  • GB/T 3789.2-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of current of anode and grid
  • GB/T 17848-1999 Test methods for electrochemical properties of sacrificial anodes
  • GB/T 12583-1998 Standard test method for measurement of extreme-pressure properties of lubricating fluids (four-ball method)
  • GB/T 22706-2008 Self-ballasted cold cathode fluorescent lamps.Service-preformance requirements
  • GB/T 7790-1996 Test method for the resistance of cathodic disbondment of anticorrosive paint
  • GB/T 41760-2022 Test method for spontaneous polarization of tourmaline
  • GB/T 12967.5-1991 Anodizing of aluminium and aluminium alloys--Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • GB/T 12967.4-1991 Anodizing of aluminium and aluminium alloys--Determination of the fastness to ultraviolet light of coloured anodic oxidation coatings
  • GB/T 8754-2006 Anodizing of aluminium and its alloys. Insulation check.by measurement of breakdown potential
  • GB/T 8752-2006 Anodizing of aluminium and its alloys. Check of continuity of thin anodic oxide coating. Copper sulphate test
  • GB/T 8752-1988 Anodizing of aluminium and aluminium alloys--Check of continuity of thin anodic oxide coatings--Copper sulphate test
  • GB/T 15555.12-1995 Solid waste--Glass electrade test--Method of corrosivity
  • GB/T 11144-2007 Standard test method for measurement of extreme-pressure prosperties of lubricating fluids (Timken method)
  • GB/T 28178-2011 Landfill disposal for very low level radioactive waste
  • GB/T 20505-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys--Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
  • GB/T 13083-2002 Determination of fluorine in feed--Ion selective electrode method
  • GB/T 24210-2009 Test method for the elastis modulus of whole graphite electrodes.Velocity of sound
  • GB/T 15825.8-2008 Sheet metal formability and test methods.Part 8:Guidelines for the determination of forming-limit diagrams
  • GB/T 32264-2015 Method of performance testing for gas chromatography-single quadrupole mass pectrometry
  • GB/T 24488-2009 Test method for electrochemical properties of magnesium alloys sacrificial anode
  • GB/T 26105-2010 Test of rust preventive oil for rust preventing ability.Electrochemical measurement with wire beam electrode

IECQ - IEC: Quality Assessment System for Electronic Components, polar and non-polar

  • QC 300202/US 0005-1985 Specifications for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode; Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads Insulated

CEN - European Committee for Standardization, polar and non-polar

  • EN ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • EN ISO 3211:2018 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation

International Organization for Standardization (ISO), polar and non-polar

  • ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
  • ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium
  • ISO 3211:1977 Anodizing of aluminium and its alloys; Assessment of resistance of anodic oxide coatings to cracking by deformation
  • ISO 2135:1976 Anodizing of aluminium and its alloys — Accelerated test of lightfastness of coloured anodic oxide coatings
  • ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
  • ISO 3211:2018 Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • ISO 2085:1976 Anodizing of aluminium and its alloys; Check of continuity of thin anodic oxide coatings; Copper sulphate test
  • ISO 10988:2011 Equipment for crop protection - Knapsack motorized air-assisted sprayers - Test methods and performance limits
  • ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
  • ISO/TS 28581:2012 Water quality - Determination of selected non-polar substances - Method using gas chromatography with mass spectrometric detection (GC-MS)
  • ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • ISO 8420:2002 Animal and vegetable fats and oils - Determination of content of polar compounds
  • ISO 8420:1990 Animal and vegetable fats and oils; determination of polar compounds content
  • ISO 2135:2010 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light

European Committee for Standardization (CEN), polar and non-polar

  • EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011)
  • EN ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2010)
  • EN ISO 636:2017 Welding consumables - Rods@ wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
  • EN 12373-15:2000 Aluminium and Aluminium Alloys - Anodizing - Part 15: Assessment of Resistance of Anodic Oxidation Coatings to Cracking by Deformation
  • EN ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
  • EN ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2010)
  • EN 1668:1997 Welding Consumables - Rods, Wires and Deposits for Tungsten Inert Gas Welding of Non Alloy and Fine Grain Steels - Classification
  • EN ISO 636:2015 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
  • EN ISO 8420:1995 Animal and Vegetable Fats and Oils - Determination of Polar Compounds Content (ISO 8420 : 1990)
  • EN 12373-16:2001 Aluminium and Aluminium Alloys - Anodizing - Part 16: Check for Continuity of Thin Anodic Oxidation Coatings - Copper Sulfate Test

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, polar and non-polar

  • JEDEC JESD211-2009 Zener and Voltage Regulator Diode Rating Verification and Characterization Testing

Institute of Electrical and Electronics Engineers (IEEE), polar and non-polar

  • IEEE Std C63.12-1999 Recommended Practice for Electromagnetic Compatibility Limits
  • IEEE Std C63.12-1987 Recommended practice for electromagnetic compatibility limits
  • SMPTE RP 134:1994 RP 134:1994 - SMPTE Recommended Practice - Polarity for Analog Audio Magnetic Recording and Reproduction

TR-TSE, polar and non-polar

  • TS 953-1972 MECHANICAL PROPERTY LIMITS FOR ALUMINIUM ALLOY FOROINGS
  • TS 2677-1977 ANODIZING OF ALUMINIUM AND ITS ALLOYS - ASSESSMENT OF RESISTANCE OF ANODIC COATINGS TO CRACKING BY DEFORMATION
  • TS 952-1972 MECHANICAL PROPERTY LIMITS FOR RIVET STOCK OF ALUMINIUM AND ALUMINIUM ALLOYS
  • TS 923-1972 MECHANICAL. PROPERTY LIMITS FOR ROLLED PRODUCTS OF ALUMIN?UM AND AL.UMINT?M AJJjOYS
  • TS 996-1972 MECHANICAL PROPERTY LIMITS FOR EXTRUDED PRODUCTS OF ALUMINIUM AND ALUMINIUM ALLOYS

Professional Standard - Light Industry, polar and non-polar

Society of Motion Picture and Television Engineers (SMPTE), polar and non-polar

Underwriters Laboratories (UL), polar and non-polar

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., polar and non-polar

Canadian Standards Association (CSA), polar and non-polar

RU-GOST R, polar and non-polar

  • GOST 11612.3-1975 Photomultipliers. Measuring method of non-uniformity of light anode sensitivity over the photocatode area
  • GOST 32502-2013 Lubricating fluids. Detrmination extreme-pressure properties on four ball mashine
  • GOST 32501-2013 Lubricating greases. Determination of extreme-pressure properties on four-ball mashine
  • GOST 310.4-1981 Cements. Methods of tests of bending and compression strengths
  • GOST 26169-1984 Radioelectronic equipment electromagnetic compatibility. High-power bipolar high-frequency linear transistors intermodulation component coefficient standards
  • GOST R 50006-1992 Lasers and solid-state laser heads. Method of measurement of polarization characteristics
  • GOST R ISO 8420-2013 Animal and vegetable fats and oils. Determination of content of polar compounds
  • GOST 28132-1995 Lead-acid traction batteries. Part 2. Dimensions of cells and terminals and marking of polarity on cells
  • GOST 28132-1989 Lead-acip traction accumulators. Basic dimensions

Professional Standard - Non-ferrous Metal, polar and non-polar

  • YS/T 411-1998 The measuring method of CO2 reaction of anode carbon,anode paste for aluminium electrolysis
  • YS/T 965-2014 Determinator for the reactivity to carbon dioxide of prebaked anodes used in the production of aluminium

BR-ABNT, polar and non-polar

PL-PKN, polar and non-polar

  • PN T06516-1990 ?on — selective elektrodes General re?uirements and tests
  • PN C04573 ArkusZ02-1974 Water and waste water Tests for organie solvents extrac- table matters Determination of impolar and polar of petroleum extractable organie matters by gravimetric method

North Atlantic Treaty Organization Standards Agency, polar and non-polar

Professional Standard - Petrochemical Industry, polar and non-polar

  • SH/T 0123-1993 Determination of oxidation performance of extreme pressure lubricating oil
  • SH/T 0202-1992 Determination of extreme pressure performance of grease (four-ball machine method)
  • SH/T 0784-2006 Standard test method for determining extreme pressure properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine
  • SH/T 0187-1992 Determination method of extreme pressure performance of lubricating oil (Falex method)

中国石油化工总公司, polar and non-polar

  • SH/T 0123-1992 Determination of oxidation properties of extreme pressure lubricating oils

PT-IPQ, polar and non-polar

  • E 302-1974
  • NP EN 12373-15-2001 Aluminium and aluminium alloys Anodizing Part 15:Assessment of resistance of anodic oxidation coatings to cracking by deformation
  • NP EN 12373-3-2001 Aluminium and aluminium alloys Anodizing Part 3:Determination of thickness of anodic oxidation coatings.Non-destructive measurement by split-beam microscope

Professional Standard - Machinery, polar and non-polar

  • JB/T 10875-2008 Measuring methods for optical properties of LEDs
  • JB/T 9185-1999 Welding procedure specification for gas tungsten arc welding
  • JB/T 10528-2005 Anti-rust properties test of rust preventive oil.Electrochemical measurement with wire beam electrode

IN-BIS, polar and non-polar

SAE - SAE International, polar and non-polar

  • SAE AMS2685C-1989 Welding@ Tungsten Arc@ Inert Gas (GTAW Method)
  • SAE AMS2685F-2017 Welding@ Tungsten Arc@ Inert Gas (GTAW Method)
  • SAE AMS2466-1997 Hard Anodic Coating of Magnesium Alloys Alkaline Type@ High Voltage
  • SAE J3021-2014 Recommended Practice for Determining Material Properties of Li-Battery Cathode Active Materials
  • SAE J3021-2021 Recommended Practice for Determining Material Properties of Li-Battery Cathode Active Materials

IT-UNI, polar and non-polar

ZA-SANS, polar and non-polar

  • SANS 5852:2008 Plastic limit and plasticity index of fines in aggregates for base-courses

ESDU - Engineering Sciences Data Unit, polar and non-polar

  • ESDU 82030 F-1986 Fire hazard properties: flash points@ flammability limits and autoignition temperatures.

BE-NBN, polar and non-polar

CU-NC, polar and non-polar

  • NC 66-29-1984 Electronics. Bipolar Transistors Measurement Methods

International Electrotechnical Commission (IEC), polar and non-polar

  • IEC 61213:1993 Analogue audio recording on video tape; polarity of magnetization
  • IEC PAS 62816-2:2013 External electrode fluorescent lamps - Part 2: Performance specifications
  • IEC PAS 62815-2:2013 Cold cathode fluorescent lamps - Part 2: Performance specifications
  • IEC 34A/1596/PAS:2012 Cold Cathode Fluorescent Lamps - Part 2: Performance Specifications
  • IEC 34A/1598/PAS:2012 External Electrode Fluorescent Lamps - Part 2: Performance Specifications
  • IEC TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
  • IEC 63286:2022 Flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements

Electronic Components, Assemblies and Materials Association, polar and non-polar

GB-REG, polar and non-polar

AASHTO - American Association of State Highway and Transportation Officials, polar and non-polar

  • T 373M/T 373-2017 Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests)
  • T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • T90-1994 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • T 90-2000 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils

(U.S.) Telecommunications Industries Association , polar and non-polar

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, polar and non-polar

  • REPORT M.2175-2010 Simultaneous dual linear polarization transmission technique using digital cross-polarization cancellation for MSS systems

International Telecommunication Union (ITU), polar and non-polar

  • ITU-R S.1844-2009 Cross-polarization reference gain pattern for linearly polarized very small aperture terminals (VSAT) for frequencies in the range 2 to 31 GHz
  • ITU-R S.1844 FRENCH-2009 Cross-polarization reference gain pattern for linearly polarized very small aperture terminals (VSAT) for frequencies in the range 2 to 31 GHz

The American Road & Transportation Builders Association, polar and non-polar

  • AASHTO T 90-2014 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • AASHTO T 90-2015 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
  • AASHTO T 90-2016 Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils

FI-SFS, polar and non-polar

CH-SNV, polar and non-polar

Professional Standard - Energy, polar and non-polar

  • NB/SH/T 0882-2014 Standard test method for determining extreme pressure properties of lubricating oils using SRV test machine

Professional Standard - Ferrous Metallurgy, polar and non-polar

  • YB/T 5212-1993 Test method for the elastis modulus of whole graphite electrodes -Velocity of sound

US-FCR, polar and non-polar

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., polar and non-polar

  • IEEE 503-1978 STANDARD FOR MEASUREMENT AND CHARACTERIZATION OF DIODE-TYPE CAMERA TUBES

European Committee for Electrotechnical Standardization（CENELEC）, polar and non-polar

  • EN IEC 63286:2022 Flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements

工业和信息化部, polar and non-polar

  • YS/T 1186-2017 Falling sand tester for testing the wear resistance of anodized films and organic polymer films on aluminum surfaces
  • SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials

IEC - International Electrotechnical Commission, polar and non-polar

  • PAS 62816-2-2013 External electrode fluorescent lamps – Part 2: Performance specifications (Edition 1.0)
  • PAS 62815-2-2013 Cold cathode fluorescent lamps – Part 2: Performance specifications (Edition 1.0)

TIA - Telecommunications Industry Association, polar and non-polar

  • TSB125-2001 Guidelines for Maintaining Optical Fiber Polarity Through Reverse-Pair Positioning

Aeronautical Radio Inc., polar and non-polar

  • ARINC 407-1 PART 5 Recommended Practice on Signal Polarities for Condition and Command Signals

  polar and non-polar, Polar column Non-polar column, non-polar column, Polar vs. Nonpolar Columns, Polar and non-polar components, Non-polar column Polar column, polar and non-polar, polarity nonpolarity, non-polar components, non-polar sample, Polar and non-polar samples, non-polar bipolar, bipolar nonpolar, non-polar, polarity nonpolarity, polar components non-polar components, Chromatographic polar, non-polar, polar phase non-polar phase, polarized and non-polarized plugs, Polar systems and non-polar.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved