ZH
RU
ES

Measurement and inspection equipment evaluation

Measurement and inspection equipment evaluation, Total:338 items.

In the international standard classification, Measurement and inspection equipment evaluation involves: Industrial automation systems, Quality, Company organization and management, Services, Welding, brazing and soldering, Occupational safety. Industrial hygiene, Medical sciences and health care facilities in general, Linear and angular measurements, Astronomy. Geodesy. Geography, Metrology and measurement in general, Test conditions and procedures in general, Farm buildings, structures and installations, Laboratory medicine, Characteristics and design of machines, apparatus, equipment, Medical equipment, Electricity. Magnetism. Electrical and magnetic measurements, Non-destructive testing, Screw threads, ELECTRICAL ENGINEERING, Power transmission and distribution networks, Electromechanical components for electronic and telecommunications equipment, Power stations in general, Installations in buildings, Hospital equipment, Paint ingredients, Protection of and in buildings, Electrical and electronic testing, Alarm and warning systems, Standardization. General rules, Fibre optic communications, Gears, Vibrations, shock and vibration measurements, Measurement of fluid flow, Fluid storage devices, Protection against dangerous goods, Radiation measurements, Optoelectronics. Laser equipment, Internal combustion engines for road vehicles, Measurement of force, weight and pressure, Diagnostic, maintenance and test equipment, Tyres, Measurement of volume, mass, density, viscosity, Electrical equipment for working in special conditions, Hydraulic energy engineering, Air quality.


Group Standards of the People's Republic of China, Measurement and inspection equipment evaluation

  • T/CIET 154-2023 Evaluation Guidelines for Intelligent Inspection and Testing Equipment
  • T/CITS 0016-2023 Electronic and electrical appliances inspection and testing institution — Guide for evaluating qualified suppliers of testing equipment
  • T/ZFB 0046-2023 Performance evaluation of technical equipment project of inspection and testing
  • T/CITS 0006-2022 Requirements for evaluating forerunner standard — Inspection and testing services of audio, video and similar electronic apparatus
  • T/CITS 0007-2022 Requirements for evaluating forerunner standard — Inspection and testing services of information technology products
  • T/CITS 0018-2023 Electronic and electrical appliances inspection and testing institution — Specification for equipment administrator capability evaluation
  • T/SCGS 313004-2023
  • T/CAGIS 8-2022 Quality Inspection and evaluation of surveying and mapping Results of Real Estate
  • T/CIQA 27-2021 Guidelines for Service Quality Evaluation of Inspection and Testing Public Technology Service Platforms
  • T/CAMA 16-2019 Technical specifications of quality evaluation for cow behaviors detecting equipment
  • T/CSBT 007-2019 Requirements for external quality assessment of blood screening laboratory
  • T/CCBD 9-2020 Brand evaluation —Testing organizations of indoor air quality and related product
  • T/CITS 0017-2023 Electronic and electrical appliances inspection and testing institution — Specification for the ability evaluation of quality directors
  • T/SHZSAQS 00114-2022 Construction of quality management system for special equipment inspection and testing institutions
  • T/ZMDS 10008-2019 Reliability Testing and Assessment for Medical Electron Linear Accelerator Part4: Method of Quantitatively Accelerated Testing and Fast Assessment for Electrical Equipment
  • T/HZQT 00006-2022 Textile Testing Laboratory Quality—Management Instrument and Equipment Period Verification

Hunan Provincial Standard of the People's Republic of China, Measurement and inspection equipment evaluation

  • DB43/T 1796-2020 Construction and evaluation of green inspection and testing institutions

Association Francaise de Normalisation, Measurement and inspection equipment evaluation

  • NF E10-201-2*NF EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2 : guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • NF A09-230-3:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3 : spectrometric method.
  • NF A09-230-1:1999 Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Part 1 : voltage divider method.
  • NF C93-400-1-1*NF EN 60512-1-1:2002 Connectors for electronic equipment - Tests and measurements - Part 1-1 : general examination - Test 1a : visual examination
  • NF A09-205-4*NF EN ISO 19232-4:2013 Non-destructive testing - Image quality of radiographs - Part 4 : experimental evaluation of image quality values and image quality tables
  • NF EN 50104/A1:2023 Appareils électriques de détection et de mesure de l'oxygène - Exigences d'aptitude à la fonction et méthodes d'essai
  • NF EN 50104:2019 Appareils électriques de détection et de mesure de l'oxygène - Exigences d'aptitude à la fonction et méthodes d'essai
  • NF C74-152:1997 Evaluation and routine testing in medical imaging departments. Part 3-2 : acceptance tests imaging performance of mammographic X-ray equipment.
  • NF C93-400-1-2*NF EN 60512-1-2:2002 Connectors for electronic equipment - Tests and measurements - Part 1-2 : general examination - Test 1b : examination of dimension and mass
  • NF C23-564*NF EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • NF A09-230-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2 : constancy check by the thick filter method.
  • NF A09-324:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment.
  • FD S10-112-4*FD ISO/TR 21254-4:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 4 : inspection, detection and measurement
  • NF C74-153*NF EN 61223-3-3:1997 Evaluation and routine testing in medical imaging departments. Part 3-3 : acceptance tests. Imaging performance of X-ray equipment for digital subtraction angiography (DSA).
  • NF T81-123:1979 Transportation equipment. Road tankers for liquified pressure gas. Holes for gauging, degassing and testing.
  • FD ISO/TR 21254-4:2011 Lasers et équipements associés aux lasers - Méthode d'essais du seuil d'endommagement provoqué par laser - Partie 4 : inspection, détection et mesurages
  • NF C93-903-20*NF EN 61300-3-20:2004 Fibres optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20 : examinations and measurements - Directivity of fibre optic branching devices.
  • NF C23-676*NF EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
  • NF E10-201-5*NF EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 : uncertainty in verification testing of indicating measuring instruments
  • NF R63-302*NF EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation/deflation of tyres for motor vehicles - Metrology, requirements and testing
  • NF C23-560-1/A11:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
  • NF C23-560-1:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
  • NF EN 50676:2019 Appareils électriques utilisés pour la détection et la mesure de la concentration de gaz frigorigènes - Exigences de performance et méthodes d'essai
  • NF C93-400-9-2*NF EN 60512-9-2:2012 Connectors for electronic equipment - Tests and measurements - Part 9-2 : endurance tests - Test 9b : electrical load and temperature
  • NF E10-201-1*NF EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications
  • NF C93-400-4-3*NF EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3 : voltage stress tests - Test 4c : voltage proof of pre-insulated crimp barrels

German Institute for Standardization, Measurement and inspection equipment evaluation

  • DIN 32506-4:1981 Testing of solderability for soft soldering; Measurement of wetting force; Testing, Assessment
  • DIN 32937:2006 Control of inspection, measuring and test equipment - Plan, manage and use of inspection, measuring and test equipments
  • DIN 4000-168:2011 Tabular layouts of properties - Part 168: Detecting elements/measuring sensors/evaluation devices including measuring amplifiers for geometrical quantities
  • DIN 32937:2018 Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
  • DIN 2272-1:1985 Inspection equipment used in dimensional metrology; requirements; auxiliary measuring devices
  • DIN 53236:1983 Testing of colouring materials; conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
  • DIN 52612-1:1979 Testing of Thermal Insulating Materials; Determination of Thermal Conductivity by the Guarded Hot Plate Apparatus; Test Procedure and Evaluation
  • DIN 4000-168:2011-11 Tabular layouts of properties - Part 168: Detecting elements/measuring sensors/evaluation devices including measuring amplifiers for geometrical quantities
  • DIN VDE 0404-3:2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Equipment for periodical tests and tests prior to commissioning medical electrical devices or systems
  • DIN EN 61223-3-5:2005 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment (IEC 61223-3-5:2004); German version EN 61223-3-5:2004
  • DIN EN ISO 14253-2:2018 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
  • DIN VDE 0404-2:2002 Testing and measuring equipment for checking the electric safety of electric devices - Part 2: Testing equipment for tests after repair, change or in case of repeat tests
  • DIN EN ISO 14253-5:2016-12 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015); German version EN ISO 14253-5:2015
  • DIN EN 60512-1-2:2003-01 Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination; Test 1b: Examination of dimension and mass (IEC 60512-1-2:2002); German version EN 60512-1-2:2002 / Note: DIN IEC 60512-2 (1994-05) remains valid alongside th...
  • DIN EN 60512-1-1:2003-01 Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination; Test 1a: Visual examination (IEC 60512-1-1:2002); German version EN 60512-1-1:2002 / Note: DIN IEC 60512-2 (1994-05) remains valid alongside this standard unt...
  • DIN EN 60512-1-3:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination; Section 3: Test 1c: Electrical engagement length (IEC 60512-1-3:1997); German version EN 60512-1-3:1997
  • DIN EN 60512-1-1:2003 Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination; Test 1a: Visual examination (IEC 60512-1-1:2002); German version EN 60512-1-1:2002
  • DIN EN 61300-3-1:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination (IEC 61300-3-1:2005); German version EN 61300-3-1:2005
  • DIN EN 60512-1-2:2003 Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination; Test 1b: Examination of dimension and mass (IEC 60512-1-2:2002); German version EN 60512-1-2:2002
  • DIN EN 62058-11:2011 Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods (IEC 62058-11:2008, modified); German version EN 62058-11:2010
  • DIN EN 50104:2011 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods; German version EN 50104:2010
  • DIN EN 61300-3-9:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-9: Examinations and measurements; far-end crosstalk (IEC 61300-3-9:1997); German version EN 61300-3-9:1997
  • DIN EN 60512-11-8:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests; Section 8: Test 11h: Sand and dust (IEC 60512-11-8:1995); German version EN 60512-11-8:1999
  • DIN ISO/TS 14253-3:2008 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002); German version CEN ISO/TS 14253-3:2007
  • DIN EN ISO 19232-4:2013 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (ISO 19232-4:2013); German version EN ISO 19232-4:2013
  • DIN EN 61300-3-26:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-26: Examinations and measurements; Measurement of the angular misalignment between fibre and ferrule axes; (IEC 61300-3-26:2002); German version EN

国家质量监督检验检疫总局, Measurement and inspection equipment evaluation

  • SN/T 4770-2017 General requirements for inspection (evaluation) methods of imported complete sets of equipment

PL-PKN, Measurement and inspection equipment evaluation

  • PN T06500 ArkusZ1-1971 Electronic measuring e?uipment Programe conditions and evaluatian of test results
  • PN T05121-1986 Electromechanical components for electronic e?uipment Basic testing procedures and measuring methods General
  • PN-EN ISO 14253-5-2016-01 P Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)

Professional Standard - Hygiene , Measurement and inspection equipment evaluation

  • WS/T 263-2006 Specincationof image quality test and evaluation for medical magnetic resonance imaging(MRI)equipment
  • WS/T 415-2013 Assessment of laboratory tests when proficiency testing is not available

国家市场监督管理总局, Measurement and inspection equipment evaluation

  • RB/T 043-2020 Inspection and testing agency management and technical capability evaluation construction project inspection and testing requirements
  • RB/T 047-2020 General requirements for inspection and testing agency management and technical capability evaluation facilities and environment
  • RB/T 039-2020 Testing Laboratory Instruments and Equipment Measurement Traceability Results Confirmation Guide

American Society of Mechanical Engineers (ASME), Measurement and inspection equipment evaluation

Association of German Mechanical Engineers, Measurement and inspection equipment evaluation

Danish Standards Foundation, Measurement and inspection equipment evaluation

  • DS 2364:1994 Measuring equipment. Requirements for inspection equipment in dimensional metrology. Auxilliary equipment
  • DS/EN 60512-1-2:2002 Connectors for electronic equipment - Tests and measurement - Part 1-2: General examination - Test 1b: Examination of dimension and mass
  • DS/EN 50379-2:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment
  • DS/EN ISO 19232-4:2013 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables
  • DS/EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • DS/EN 60512-1-1:2002 Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination
  • DS/EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • DS/EN ISO 14253-2/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • DS/EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements

International Organization for Standardization (ISO), Measurement and inspection equipment evaluation

  • ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • ISO 14253-2:2011/cor 1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification; Technica
  • ISO/TS 14253-2:1999/Cor 1:2007 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification; Technical Co
  • ISO/TS 14253-2:1999 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • ISO 18175:2004 Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
  • ISO 19232-4:2013 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables
  • ISO/TR 10064-5:2005 Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments
  • ISO 16526-2:2011 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
  • ISO 10647:1996 Procedures for calibrating and determining the response of neutron-measuring devices used for radiation protection purposes
  • ISO/TR 21254-4:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 4: Inspection, detection and measurement
  • ISO/TR 7066-1:1997 Assessment of uncertainty in calibration and use of flow measurement devices - Part 1: Linear calibration relationships
  • ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments
  • ISO 14253-1:2013 Geometrical product specifications (GPS).Inspection by measurement of workpieces and measuring equipment.Part 1: Decision rules for proving conformity or nonconformity with specifications
  • ISO 14253-1:1998 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 1: Decision rules for proving conformance or non-conformance with specifications
  • ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications
  • ISO/TS 10811-1:2000 Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 1: Measurement and evaluation
  • ISO 13555-3:2004 Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 3: Validation of timing measurement devices
  • ISO/TR 10064-5:2005/cor 1:2006 Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments; Technical Corrigendum 1
  • ISO 7066-2:1988 Assessment of uncertainty in the calibration and use of flow measurements devices; part 2: non-linear calibration relationships
  • ISO/TS 14253-3:2002 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements

Professional Standard - Special Equipment Specification, Measurement and inspection equipment evaluation

  • TSG Z7002-2004 Detailed Rules for Appraisal and Review of Special Equipment Inspection and Testing Institutions
  • TSG Z7003-2004 Quality management system requirements for special equipment inspection and testing institutions

British Standards Institution (BSI), Measurement and inspection equipment evaluation

  • BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • BS ISO 21474-1:2020 In vitro diagnostic medical devices. Multiplex molecular testing for nucleic acids - Terminology and general requirements for nucleic acid quality evaluation
  • BS EN 60512-1-2:2002 Connectors for electronic equipment - Tests and measurements - General - Test 1b - Examination of dimension and mass
  • BS EN 60512-1-1:2002 Connectors for electronic equipment - Tests and measurements - General - Test 1a - Visual examination
  • 19/30361173 DC BS ISO 21474. In vitro diagnostic medical devices. Multiplex molecular testing for nucleic acids. Part 1. Terminology and general requirements for nucleic acid quality evaluation
  • BS EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
  • BS EN 61300-3-6:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Return loss
  • BS ISO TR 7066-1:1997 Assessment of uncertainty in calibration and use of flow measurement devices - Linear calibration relationships
  • BS EN ISO 14253-5:2015 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Uncertainty in verification testing of indicating measuring instruments
  • BS EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4c - Voltage proof of pre-insulated crimp barrels
  • BS EN 61300-3-34:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Attenuation of random mated connectors
  • BS EN 61300-3-38:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Group delay, chromatic dispersion and phase ripple
  • BS EN ISO 10360-5:2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems
  • BS EN 12645:2014 Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
  • BS EN ISO 14253-3:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidelines for achieving agreements on measurement uncertainty statements
  • BS EN 50271:2002 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • BS EN ISO 14253-1:2013 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformity or nonconformity with specification
  • BS EN 61300-3-34:2009 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-34: Examinations and measurements — Attenuation of random mated connectors

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Measurement and inspection equipment evaluation

  • GB/T 18779.2-2004 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieses and measuring equipment-Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification
  • GB/T 18779.2-2023 Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification
  • GB 50185-1993 Standard for inspection and evaluation of thermal insulating work of industrial equipment and pipeline
  • GB 50185-93 Standards for Quality Inspection and Evaluation of Industrial Equipment and Pipeline Insulation Engineering
  • GB/T 14125-2008 Mechanical vibration and shock.Measurement and evalution of shock and vibration effects on sensitive equipment in buildings
  • GB/T 18779.1-2002 Geometrical product specifications (GPS)-Inspection by measurement of workpieces and measuring equipment--Part 1:Decision rules for proving conformance or non-conformance with specifications
  • GB/T 23717.1-2009 Mechanical vibration and shock.Vibration and shock in buildings with sensitive equipment.Part 1:Measurement and evaluation
  • GB/T 18779.1-2022 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 1:Decision rules for verifying conformity or nonconformity with specifications

Shanghai Provincial Standard of the People's Republic of China, Measurement and inspection equipment evaluation

  • DB31/T 1024-2017 Enterprise Quality Credit Grading Evaluation Guidelines Part 3: Inspection and Testing Institutions

Professional Standard - Traffic, Measurement and inspection equipment evaluation

  • JTJ 244-1995 Standard of Quality Inspection and Assessment for Port Equipment Installation Construction
  • JTJ 244-1995（条文说明） Standards for Quality Inspection and Evaluation of Port Equipment Installation Engineering

Professional Standard - Ferrous Metallurgy, Measurement and inspection equipment evaluation

  • YBJ 239-1992 Metallurgical electrical equipment installation quality inspection and evaluation standards
  • YBJ 240-1992 Quality inspection and evaluation standards for metallurgical machinery and equipment installation engineering (mineral processing equipment)
  • YBJ 241-1992 Quality inspection and evaluation standards for metallurgical machinery and equipment installation engineering (sintering equipment)
  • YBJ 242-1992 Quality inspection and evaluation standards for metallurgical machinery and equipment installation engineering (coking equipment)
  • YB 9245-1992 Standards for quality inspection and evaluation of metallurgical machinery and equipment installation engineering (steel rolling equipment)

Professional Standard - Chemical Industry, Measurement and inspection equipment evaluation

  • HG 20236-1993 Standards for Quality Inspection and Evaluation of Chemical Equipment Installation Engineering
  • HG 20236-1993（条文说明） Standards for Quality Inspection and Evaluation of Chemical Equipment Installation Engineering

Korean Agency for Technology and Standards (KATS), Measurement and inspection equipment evaluation

  • KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory
  • KS C IEC 61223-3-2:2005 Evaluation and routine testing in medical imaging departments－Part 3－2：Acceptance tests-Imaging performance of mammographic X-ray equipment
  • KS C IEC 61223-3-2:2017 Evaluation and routine testing in medical imaging departments－Part 3－2：Acceptance tests-Imaging performance of mammographic X-ray equipment
  • KS P 1975-2018 Protocol for evaluation of precision performance of the quantitative test in in-vitro diagnostic medical laboratory
  • KS C IEC 61223-2-11:2005 Evaluation and routine testing in medical imaging departments-Part 2-11:Constancy tests-Equipment for general direct radiography
  • KS C IEC 60512-1-1-2002(2013) Connectors for electronic equipment－Tests and measurements－Part 1－1：General examination－Test 1a：Visual examination
  • KS C IEC 61223-3-3:2005 Evaluation and routine testing in medical imaging departments-Part 3-3:Acceptance tests-Imaging performance of X-ray equipment for digital subtraction angiography(DSA)
  • KS C IEC 60512-1-2:2008 Connectors for electronic equipment-Tests and measurements-Part 1-2:General examination-Test 1b:Examination of dimension and mass
  • KS C IEC 60512-1-2:2014 Connectors for electronic equipment－Tests and measurements－Part 1-2：General examination－Test 1b：Examination of dimension and mass
  • KS B 0726-2014 Mechanical vibration and shock-Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
  • KS C IEC 60512-1-1:2002 Connectors for electronic equipment-Tests and measurements-Part 1-1:General examination-Test 1a:Visual examination
  • KS C IEC 60512-1-1:2014 Connectors for electronic equipment-Tests and measurements-Part 1-1:General examination-Test 1a:Visual examination
  • KS B ISO 10360-7:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
  • KS B ISO 10360-7:2015 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
  • KS B 0726-2001 Mechanical vibration and shock-Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
  • KS B 0726-2001(2011) Mechanical vibration and shock-Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
  • KS B ISO 14253-1:2012 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 1:Decision rules for proving conformance or non-conformance with specifications
  • KS B ISO 14253-1:2014 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 1:Decision rules for proving conformance or non-conformance with specifications
  • KS B ISO 14253-1:2015 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformity or nonconformity with specifications
  • KS B ISO 14253-2:2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measu
  • KS R ISO 13555-3:2005 Diesel engines-Procedure for checking the dynamic timing of diesel fuel injection equipment-Part 3:Validation of timing measurement devices
  • KS R ISO 13555-3:2015 Diesel engines－Procedure for checking the dynamic timing of diesel fuel injection equipment－Part 3：Validation of timing measurement devices
  • KS B ISO 10811-1:2014 Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation
  • KS B ISO 10811-1:2009 Mechanical vibration and shock-Vibration and shock in buildings with sensitive equipment-Part 1:Measurement and evaluation
  • KS C IEC 61298-2-2003(2008) Process measurement and control devices－General methods and procedures for evaluating performance－Part 2：Tests under reference conditions
  • KS C IEC 61223-2-7-2003(2018) Evaluation and routine testing in medical imaging departments —Part 2-7: Constancy tests — Equipment for intra-oral dental radiography excluding dental panoramic equipment
  • KS B ISO TR 7066-1:2004 Assessment of uncertainty in calibration and use of flow measurement devices-Part 1:Linear calibration relationships
  • KS B ISO TR 7066-1:2015 Assessment of uncertainty in calibration and use of flow measurement devices－Part 1：Linear calibration relationships
  • KS B ISO 14253-2:2014 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 2:Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • KS B ISO 14253-2:2012 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 2:Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • KS B ISO 14253-2:2015 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • KS B ISO 10360-2:2003 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size
  • KS B ISO 10360-2:2014 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size
  • KS C IEC 60512-4-3:2002 Connectors for electronic equipment-Tests and measurements-Part 4-3:Voltage stress tests-Test 4c:Voltage proof ofpre-insulated crimp barrels
  • KS C IEC 60512-4-3:2014 Connectors for electronic equipment－Tests and measurements－Part 4－3：Voltage stress tests－Test 4c：Voltage proof ofpre－insulated crimp barrels

Professional Standard - Grain, Measurement and inspection equipment evaluation

  • LS/T 6402-2017 Inspection of grain and oils.The general principle of standard adaptability verification and evaluation results for equipments and testing methods

Professional Standard - Medicine, Measurement and inspection equipment evaluation

  • YY/T 0688.2-2010 Clinical laboratory testing and in vitro diagnostic test systems.Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility devices.Part 2 : Evaluation of performance of antimicrobial susceptibility test devi

Professional Standard - Petroleum, Measurement and inspection equipment evaluation

  • SY/T 4028-1993 Standard for quality inspection and evaluation of petroleum construction engineering The work for equipment installation
  • SY/T 4028-1993(条文说明) Standard for Quality Inspection and Evaluation of Petroleum Construction Engineering the Work for Plant Installation
  • SY/T 4032.10-1993 Standard for quality inspection and evaluation of petroleum construction engineering Telecommunication engineering(Telecommunication power equipment installing engineering)
  • SY/T 4032.10-1993(条文说明) Standard for Quality Inspection and Evaluation of Petroleum Construction Engineering.Telecommunication Engineering(Telecommunication Power Equipment Installing Engineering)
  • SY/T 4032.6-1993(条文说明) Standard for Quality Inspection and Evaluation of Petroleum Construction Engineering.Telecommunication Engineering (Local Switching Equipment Installing Engineering)
  • SY/T 4032.6-1993 Standard for quality inspection and evaluation of petroleum construction engineering Telecommunication engineering (local switching equipment installing engineering)
  • SY/T 4032.5-1993 Standard for quality inspection and evaluation of petroleum construction engineering Telecommunication engineering (Toll transit switching equipment installing engineering)
  • SY/T 4032.5-1993(条文说明) Standard for Quality Inspection and Evaluation of Petroleum Construction Engineering.Telecommunication Engineering (Toll Transit Switching Equipment Installing Engineering)
  • SY/T 4032.7-1993 Standard for quality inspection and evaluation of petroleum construction engineering Telecommunication engineering (Installation engineering of local SPC)
  • SY/T 4032.7-1993(条文说明) Standard for Quality Inspection and Evaluation of Petroleum Construction Engineering.Telecommunication Engineering (Installation Engineering of Local SPC)

中国石油天然气总公司, Measurement and inspection equipment evaluation

  • SY 4028-1993 Petroleum construction project quality inspection and assessment standard equipment installation project
  • SY 4032.6-1993 Petroleum construction project quality inspection and assessment communication project (city telephone switching equipment installation project)
  • SY 4032.7-1993 Petroleum construction project quality inspection and assessment communication project (city telephone program-controlled switching equipment installation project)
  • SY 4032.5-1993 Petroleum construction project quality inspection and assessment communication project (long-distance communication and telephone switching equipment installation project)

Professional Standard - Non-ferrous Metal, Measurement and inspection equipment evaluation

  • YS/T 443-2001 Guidelines for Copper Processing Enterprises to Equip Inspection, Measuring and Testing Equipment
  • YS/T 444-2001 Specifications for inspection, measurement and test equipment of aluminum processing enterprises
  • YS/T 5422-2014 Inspection and evaluation standards of construction quality of smelting equipment installation for light metal
  • YS/T 5421-2014 Inspection and evaluation standards of project quality of mining equipment installation in non-ferrous industry
  • YS/T 5425-2014 Inspection and evaluation standards of project quality of processing equipment installation in non-ferrous industry
  • YS/T 5420-2014 Inspection and evaluation standards of project quality of general equipment installation in non-ferrous industry

工业和信息化部, Measurement and inspection equipment evaluation

  • YS/T 443-2022 Guidelines for equipping copper processing enterprises with inspection, measuring and testing equipment

AT-ON, Measurement and inspection equipment evaluation

  • ONORM M 9412-1994 Requirements for evaluation equipment for continuous measurement of the emission of air contaminants
  • ONORM M 1345-1995 Control of measuring and test equipment — Testing instruction for dial test indicators (lever type) for linear measurement
  • OENORM EN ISO 14253-2:2021 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425

Professional Standard - Petrochemical Industry, Measurement and inspection equipment evaluation

  • SH 3514-2001 Standard for quality inspection and assessment of petrochemical equipment erection engineerings

Jiangsu Provincial Standard of the People's Republic of China, Measurement and inspection equipment evaluation

  • DB32/T 3166.2-2016 Integrity Specifications for Quality and Technical Supervision, Inspection and Testing Part 2: Inspection and Testing of Special Equipment

European Committee for Standardization (CEN), Measurement and inspection equipment evaluation

  • EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • ENV ISO 14253-2:2001 Geometrical Product Specifications (GPS)- Inspection by Measurement of Workpieces and Measuring Equipments - Part 2: Guide to the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification
  • EN ISO 14253-2:2011/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technic
  • EN ISO 19232-4:2013 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables [Superseded: CEN EN 462-4]
  • EN ISO 16526-2:2020 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
  • EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification
  • EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
  • EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
  • EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
  • EN ISO 14253-1:1998 Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications ISO 14253-1:1998
  • CEN ISO/TS 14253-4:2010 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Measurement and inspection equipment evaluation

  • GB/T 17215.811-2017 Electricity metering equipment （AC）—Acceptance inspection—Part 11: General acceptance inspection methods

国家市场监督管理总局、中国国家标准化管理委员会, Measurement and inspection equipment evaluation

  • GB/T 23901.4-2019 Non-destructive testing—Image quality of radiographs—Part 4: Experimental evaluation of image quality values and image quality tables
  • GB/T 18779.5-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments

AENOR, Measurement and inspection equipment evaluation

  • UNE-EN 61223-3-2:2009 Evaluation and routine testing in medical imaging departments -- Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment
  • UNE-EN 60512-1-2:2002 Connectors for electronic equipment - Tests and measurements -- Part 1-2: General examination - Test 1b: Examination of dimension and mass.
  • UNE-EN 50379-2:2013 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment
  • UNE-EN 50104:2011 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • UNE-EN ISO 14253-2:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425

American Gear Manufacturers Association, Measurement and inspection equipment evaluation

  • AGMA ISO 10064-5-A06:2006 Code of Inspection Practice - Part 5: Recommendations Relative to Evaluation of Gear Measuring Instruments

Professional Standard - Electricity, Measurement and inspection equipment evaluation

  • DL/T 5161.13-2002 Specification for construction quality checkout and evaluation of electric equipment installation Part 13:Power converter equipment
  • DL/T 5161.13-2018 Specification for construction quality checkout and evaluation of electric equipment installation Part 13:Power converter equipment
  • DL/T 5212.6-2009 Code for construction quality acceptance and evaluation of electric power construct - Part 6: The equipment and the system with water treatment and hydrogen generation
  • DL/T 5210.6-2009 Specification for construction quality acceptance and evaluation of electric power construct Part 6: The equipment and the system with the water treatment and hydrogen generation

Professional Standard - Navy, Measurement and inspection equipment evaluation

  • HJB 324.5-2006 Introduced Russian submarine weapon test equipment metrological verification regulations Part 5: 2.761.044 logic equipment tester
  • HJB 324.32-2006 Part 32 of the Metrology and Verification Regulations for Russian Submarine Weapons Test Equipment: БПЗO Tester
  • HJB 324.31-2006 Part 31 of the Metrological Verification Regulations for Introduced Russian Submarine Weapons Testing Equipment: AO and кO Tester
  • HJB 324.18-2006 Part 18 of the metrological verification regulations for Russian submarine weapon testing equipment: кя2.702.104 test bench
  • HJB 324.8-2006 Part 8: 814.08.80 Test Bench of Introduced Russian Submarine Weapon Test Equipment Metrology and Verification Regulations
  • HJB 324.11-2006 Part 11 of the Measures and Verification Regulations for Russian Submarine Weapons Test Equipment: 2042.02.020-01 Angular Velocity Limiter Test Bench
  • HJB 324.19-2006 Part 19 of the metrological verification regulations for Russian submarine weapon testing equipment: кя2.702.105зщиC standard test bench
  • HJB 324.9-2006 Introduced Russian submarine weapon test equipment measurement and verification regulations Part 9: 829.51.11 Direction instrument test bench
  • HJB 324.33-2006 Part 33 of the Metrology and Verification Regulations for Russian Submarine Weapons Test Equipment: шиC MA г-9 Test Bench

KR-KS, Measurement and inspection equipment evaluation

  • KS C IEC 60512-1-2-2008 Connectors for electronic equipment－Tests and measurements－Part 1-2：General examination－Test 1b：Examination of dimension and mass
  • KS B ISO 14253-2-2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measu

International Telecommunication Union (ITU), Measurement and inspection equipment evaluation

  • ITU-T O.9 SPANISH-1999 Measuring Arrangements to Assess the Degree of Unbalance About Earth - Series O: Specifications of Measuring Equipment General Study Group 4; 19 pp
  • ITU-T O.9 FRENCH-1999 Measuring Arrangements to Assess the Degree of Unbalance About earth

未注明发布机构, Measurement and inspection equipment evaluation

  • BS EN ISO 14253-2:2011(2013) Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment Part 2 : Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
  • BS EN 61779-1:2000(2004) Electrical apparatus for the detection and measurement of flammable gases — Part 1 : General requirements and test methods

Indonesia Standards, Measurement and inspection equipment evaluation

Lithuanian Standards Office , Measurement and inspection equipment evaluation

  • LST EN 462-4-2001 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables
  • LST EN 50104-2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • LST EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
  • LST L ENV ISO 14253-2:2002 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 1425
  • LST EN ISO 14253-2:2011/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technic
  • LST EN 50379-2-2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances -- Part 2: Performance requirements for apparatus used in statutory inspections and assessment

Standard Association of Australia （SAA）, Measurement and inspection equipment evaluation

  • AS 4826.1:2001 Geometric Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment
  • AS/NZS 61779.1:2000 Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods
  • AS/NZS 4184.2.6:1995 Evaluation and routine testing in medical imaging departments - Constancy tests - X-ray equipment for computed tomography
  • AS/NZS 4184.3.2:1998 Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of mammographic X-ray equipment
  • AS/NZS 4184.3.3:1998 Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA)

Professional Standard - Civil Engineering, Measurement and inspection equipment evaluation

  • TJ 305-1975 Construction and installation engineering quality inspection and evaluation standards for general machinery and equipment installation engineering

CENELEC - European Committee for Electrotechnical Standardization, Measurement and inspection equipment evaluation

  • PREN 50104-2018 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • EN 50104:1995 Electrical Apparatus for the Detection and Measurement of Oxygen Performance Requirements and Test Methods
  • EN 50104:1998 Electrical Apparatus for the Detection and Measurement of Oxygen - Performance Requirements and Test Methods
  • EN 50104:2002 Electrical Apparatus for the Detection and Measurement of Oxygen - Performance Requirements and Test Methods
  • PREN 50676-2019 Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6 Performance requirements and test methods
  • PREN 50676-2018 Electrical equipment used for detection and concentration measurement of refrigerant gases or SF6 Performance requirements and test methods

ES-UNE, Measurement and inspection equipment evaluation

  • UNE-EN 50104:2021/A1:2023 Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods
  • UNE-EN 50104:2021 Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods
  • UNE-EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) (Endorsed by AENOR in November of 2015.)

Japanese Industrial Standards Committee (JISC), Measurement and inspection equipment evaluation

  • JIS C 5402-1-2:2005 Connectors for electronic equipment -- Tests and measurements -- Part 1-2: General examination -- Test 1b: Examination of dimension and mass
  • JIS C 5402-1-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 1-1: General examination -- Test 1a: Visual examination

International Electrotechnical Commission (IEC), Measurement and inspection equipment evaluation

  • IEC 60512-1-2:2002 Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination; Test 1b: Examination of dimension and mass
  • IEC 60512-1-1:2002 Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination; Test 1a: Visual examination
  • IEC 61557-10:2000 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective meas
  • IEC 61223-3-5:2004/COR1:2006 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment; Corrigendum 1
  • IEC 61300-3-28:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements; Transient loss
  • IEC 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss
  • IEC 61300-3-6:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
  • IEC 60512-9-2:2011 Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
  • IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
  • IEC 61300-3-38:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38: Examinations and measurements - Group delay, chromatic dispersion and phase ripple
  • IEC 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests; Test 4c: Voltage proof of pre-insulated crimp barrels

European Committee for Electrotechnical Standardization（CENELEC）, Measurement and inspection equipment evaluation

  • EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
  • EN 60512-1-2:2002 Connectors for Electronic Equipment - Tests and Measurements Part 1-2: General Examination - Test 1b: Examination of Dimensions and Mass
  • EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
  • EN 60512-1-1:2002 Connectors for Electronic Equipment - Tests and Measurements Part 1-1: General Examination - Test 1a: Visual Examination

国家能源局, Measurement and inspection equipment evaluation

  • NB/T 10185-2019 Technical specifications for performance testing and quality assessment of key equipment used in grid-connected photovoltaic power stations

SE-SIS, Measurement and inspection equipment evaluation

  • SIS SS-EN 50 054-1992 Electrical apparatus for the detection and measurement of combustible gases — General requirements and test methods

Taiwan Provincial Standard of the People's Republic of China, Measurement and inspection equipment evaluation

  • CNS 14866-3-2004 Measurement of water flow in closed conduits - Meters for cold potable water - Part 3: Test methods and equipment
  • CNS 14866.3-2004 Measurement of water flow in closed conduits - Meters for cold potable water - Part 3: Test methods and equipment

American Society for Testing and Materials (ASTM), Measurement and inspection equipment evaluation

  • ASTM D7720-11 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
  • ASTM D7720-11(2017) Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

YU-JUS, Measurement and inspection equipment evaluation

  • JUS N.B2.762-1990 Low voltage electrical installations. Verification of conditions for protection by automatic disconnection of supply, Measurement of earth electrode resistance
  • JUS M.N4.813-1987 Braking of road vehicles, tractors and earth moving machiner/. Laboratory evaluation ofbrake functio-nal characteristics — test procedure

Professional Standard - Commodity Inspection, Measurement and inspection equipment evaluation

  • SN/T 3194.1-2012 Methods for the test of audio,video and similar electronic apparatus for import and export.Part 1:Measurement for the power consumption of audio,video and related equipment
  • SN/T 1843.4-2014 Rules for the inspection of electrical equipment for measurement,control,and laboratory use for import and export.Part 4:Insulation resistance meter
  • SN/T 1843.2-2013 Rules for the inspection of electrical equipment for measurement, control, and laboratory use for import and export.Part 2:Alternating current static watt-hour meters

BELST, Measurement and inspection equipment evaluation

  • STB 8015-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Testing equipment. General requirements for verification

AT-OVE/ON, Measurement and inspection equipment evaluation

  • OVE EN 50676-2021 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods (german version)

RU-GOST R, Measurement and inspection equipment evaluation

  • GOST R IEC 61223-3-5-2008 Evaluation and routine testing in medical imaging departments. Part 3-5. Acceptance tests. Imaging performance of computed tomography X-ray equipment

European Telecommunications Standards Institute (ETSI), Measurement and inspection equipment evaluation

  • ETSI ETR 273-6-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of Radiated Methods of Measurement (Using Test Sites) and Evaluation of the Corresponding Measurement Uncertainties; Part 6: Test Fixtures

GOSTR, Measurement and inspection equipment evaluation

  • GOST R 58372-2019 Optics and photonics. Lasers and laser-related equipment. Methods for determination of laser-induced damage threshold. Part 4. Inspection, detection and measurement

Anhui Provincial Standard of the People's Republic of China, Measurement and inspection equipment evaluation

  • DB34/T 371.2-2014 Specifications for Construction Quality Inspection and Evaluation of Water Conservancy and Hydropower Projects Part 2: Metal Structure and Electromechanical Equipment Installation Engineering

Underwriters Laboratories (UL), Measurement and inspection equipment evaluation

  • UL 2823-2013 Greenguard - Certification Program Method for Measuring and Evaluating Chemical and Particle Emissions From Electronic Equipment Using Dynamic Environmental Chambers

  Acceptance inspection of alternating current measuring equipment - Part 11 General acceptance inspection methods, Measurement and inspection equipment evaluation, Measuring Equipment Evaluation, The evaluation equipment measures the, Measurement and inspection equipment, How to check its measurement correlation with the measurement equipment, Measuring and testing equipment.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved