ZH
RU
ES

Precision weighing

Precision weighing, Total:257 items.

In the international standard classification, Precision weighing involves: Measurement of volume, mass, density, viscosity, Measurement of force, weight and pressure, Inorganic chemicals, Thermodynamics and temperature measurements, Air quality, Construction materials, Machine tools, Metalliferous minerals, Textile fibres, Products of the chemical industry, Analytical chemistry, Chipless working equipment, Paint ingredients, Lifting equipment, Industrial automation systems, Linear and angular measurements, Machine tool systems, Welding, brazing and soldering, Quality, Metrology and measurement in general, Ceramics, Fluid power systems, Earthworks. Excavations. Foundation construction. Underground works, Vibrations, shock and vibration measurements, Services, Materials for aerospace construction, Mechanical testing, Aerospace electric equipment and systems, Non-ferrous metals, Waxes, bituminous materials and other petroleum products, Road engineering.

RU-GOST R, Precision weighing

GOST 14004-1968 Lever balance of general use. Limits of weighing. Norms of accuracy
GOST 11810-1966 Silicate-blocks. Standard of weighting accuracy
GOST R ISO 15767-2007 Workplace atmospheres. Accuracy in weighing collected aerosols
GOST 11830-1966 Building materials. Standard of weighting accuracy
GOST 30240.5-1995 Barite concentrate. Method for determination of density
GOST 29266-1991 Cranes and related equipment. Accuracy requirements for measuring parameters during testing
GOST 9753-1988 Hydraulic gap presses. Parameters and dimensions. Norms of accuracy
GOST 14047.10-1978 Lead concentrates. Determination of silicon dioxide. Photometric and gravimetric methods
GOST R ISO 5725-2-2002 Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method

HU-MSZT, Precision weighing

MSZ 6192-1980

Korean Agency for Technology and Standards (KATS), Precision weighing

KS B OIMLR 44-2006 Alcoholometers and alcohol hydrometers and thermometers for use in alcoholometry
KS B OIMLR 44-2006(2021) Alcoholometers and alcohol hydrometers and thermometers for use in alcoholometry
KS B OIMLR 44-2006(2016) Alcoholometers and alcohol hydrometers and thermometers for use in alcoholometry
KS E ISO 4295-2012(2022) Manganese ores and concentrates－Determination of aluminium content－Photometric and gravimetric methods
KS E ISO 4295-2012(2017) Manganese ores and concentrates－Determination of aluminium content－Photometric and gravimetric methods
KS B ISO 9373-2015(2020) Cranes and related equipment — Accuracy requirements for measuring parameters during testing
KS B ISO 13041-4:2010 Test conditions for numerically controlled turning machines and turning centres-Part 4:Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 13041-4:2014 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 9373:2004 Cranes and related equipment-Accuracy requirements for measuring parameters during testing
KS B ISO 9373:2015 Cranes and related equipment — Accuracy requirements for measuring parameters during testing
KS E ISO 4295:2012 Manganese ores and concentrates－Determination of aluminium content－Photometric and gravimetric methods
KS I ISO 15767-2012(2017) Workplace atmospheres－Controlling and characterizing uncertainty in weighing collected aerosols
KS A ISO 5725-2-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 2：Basic method for the determination of repeatability and reproducibility of a standard measurement method
KS I ISO 15767:2012 Workplace atmospheres－Controlling and characterizing uncertainty in weighing collected aerosols
KS B ISO 230-2:2020 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
KS B ISO 16063-42:2017 Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
KS B ISO 16063-42-2017(2022) Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
KS B ISO 230-2:2014 Test code for machine tools-Part 2 : Determination of accuracy and repeatability of positioning numerically controlled axes
KS B ISO 230-2:2015 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
KS B ISO 230-2:2007 Test code for machine tools-Part 2 : Determination of accuracy and repeatability of positioning numerically controlled axes
KS B ISO 10791-5:2021 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-5-2016(2021) Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-4-2016(2021) Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 10791-4:2021 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS A ISO 5725-2:2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

CZ-CSN, Precision weighing

CSN 80 0203-1971 Determination of fibre fineness by weighting method
CSN 20 0300 Cast.31-1989 Measurement of geometrical accura-cy of machine tools. Methods of measurement of accuracy and repea-tability of positioning
CSN 20 0300 Cast.30-1987 Measurements of geometrical accuracy of machine tools.Methods of the measurement of the possition setting repeatability
CSN 44 1822-1989 Iron ores and manganese ores, agglomerates and pellets. Methods for determination of specific, apparent and bulk density
CSN 44 1809-1980 Iron ores, concentrates, aglomerates and pellets. Determination of nickel content. Photometric, atomic apsorption and gravimetric methods
CSN ISO 5997:1993 Chromium ores and concentrates. Determination of silicon content. Molecular absorption spectrometric method and gravimetric method

Professional Standard - Machinery, Precision weighing

JB/T 8332.1-1996 Heavy duty depth drill boring machines Precision
JB/T 3663.3-1999 Heavy horizontal lathe Accuracy inspection
JB/T 8325.1-1996 Numerically controlled heavy duty horizontal lathes Precision
JB/T 11870.3-2014 Heavy duty pipe bender.Part 3: Testing of the accuracy
JB/T 8603.2-1999 Accuracy inspection of heavy-duty rotary table
JB/T 8603.2-2006 Heavy-duty rotary table Part 2: Testing of the accuracy
JB/T 11574-2013 CNC heavy multi-function horizontal lathes.Testing of the accuracy
JB/T 8332.1-2011 Heavy duty deep hole drilling & boring machines.Part 1:Testing of the accuracy
JB/T 8603.2-2019 Heavy-duty rotary table part 2: accuracy inspection
JB/T 8772.5-1998 Test conditions of precision machining centres.Part 5:Tests for accuracy and repeatability of positioning of work-holding pallets
JB/T 8772.4-1998 Test conditions of precision machining centres.Part 4:Accuracy and repeatability
JB/T 12408.1-2015 NC heavy duty deep-hole drilling and boring machines.Part 1 : Testing of the accuracy
JB/T 11774.2-2014 NC heavy duty crankshaft whirlwind lathe.Part 2: Testing of the accuracy
JB/T 8771.5-1998 Test conditions of machining centres.Part 5:Tests for accuracy and repeatability of positioning of work-holding pallets
JB/T 8771.4-1998 Test conditions of machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
JB/T 12411.1-2015 CNC heavy duty vertical turning and boring lathes with movable columns.Part 1 : Testing of the accuracy
JB/T 2617.4-2014 Crankshaft grinding machines.Part 4: Heavy duty machine tools with wheelhead carriage longitudinal travel.Testing of the accuracy
JB/T 6340.5-2014 Roll grinding machines.Part 5: Heavy duty machine tools with wheelhead carriage longitudinal travel.Testing of the accuracy
JB/T 11776.1-2014 Heavy duty movable portal-type turning-milling machining centers.Part 1: Testing of the accuracy

IN-BIS, Precision weighing

IS 2302-1989

AENOR, Precision weighing

UNE 43346:1987 GLASS ALCOHOLOMETERS AND ALCOHOL HYDROMETERS NOT INCORPORATING A THERMOMETER
UNE 15331-4:2005 Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes

(U.S.) Ford Automotive Standards, Precision weighing

FORD FLTM EU BN 050-07-2001 DETERMINATION OF THICKNESS OF PLASTIC SHEET - WEIGHT METHOD

RO-ASRO, Precision weighing

STAS 7286-1973 HOISTING EQUIPMENT Range ol nominal lifting heights
STAS 7287-1973 Ho ist ing equipiment RANGE OF NOMINAI WORKING SPETDS

Indonesia Standards, Precision weighing

SNI 08-0589-1989 Staple synthetic fibres, Test method for fineness (weighing method)

Taiwan Provincial Standard of the People's Republic of China, Precision weighing

CNS 6571-1980 Determination of the Density and Relative Density of Essential Oils
CNS 14636-2002 Determination of accuracy and repeatability of positioning of numerically controlled machine tools
CNS 15077-5-2007 Test conditions for machining centers - Part 5 : Accuracy and repeatability of positioning of work-holding pallets
CNS 15077-4-2007 Test conditions for machining centers - Part 4 : Accuracy and repeatability of positioning of linear and rotary axes

未注明发布机构, Precision weighing

BS 5471:1977(2007) Specification for Thermometer for use with alcohol hydrometers
BS 5470:1977(2007) Specification for Glass alcohol hydrometers not incorporating a thermometer
VDI VDE 2617 Blatt 2-1-2014 Accuracy of coordinate measuring machines Parameters and their reverification Code of practice for the application of DIN EN ISO 10360-2 for length measurement

ES-UNE, Precision weighing

UNE 43346:1987 ERRATUM:2011 Glass alcoholometers and alcohol hydrometers not incorporating a thermometer
UNE-ISO 230-2:2016 Test code for machine tools -- Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
UNE-EN ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017) (Endorsed by Asociación Española de Normalización in November of 2017.)

Professional Standard - Aerospace, Precision weighing

QJ 1880A-1997 Classification standard for high-precision large-scale heavy-duty critical and valuable equipment

Professional Standard - Agriculture, Precision weighing

NY/T 247-2009 Determination of the fineness uniformity for sisal yarn Segment length weighing method
NY/T 247-1995 Determination of Uniformity of Fineness of Sisal Yarns Fragment Length Weighing Method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Precision weighing

GB/T 16985-1997 Test methods for length of cotton fibres--Middle weighting method
GB/T 6100-2007 Test method for linear density of cotton fibres.Cut middles method
GB/T 6100-1985 Test method for linear density of cotton fibres--Cut middles method
GB/T 23569-2009 Test conditions for heavy duty horizontal lathes.Testing of the accuracy
GB/T 20957.5-2007 Test conditions of precision machining centres.Part 5:Tests for accuracy and repeatability of positioning of wrk-holding pallets
GB/T 20957.4-2007 Test conditions for precision machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 13233-1991 General purpose specification of high-precise quartz spring gravimeter
GB/T 17421.2-2000 Test code for machine tools-Part 2:Determination of accuracy and repeatability of positioning numerically controlled axes
GB/T 17421.2-2023 General Rules for Machine Tool Inspection Part 2: Determination of Positioning Accuracy and Repetitive Positioning Accuracy of CNC Axis
GB/T 17421.2-2016 Test code for machine tools.Part 2: Determination of accuracy and repeatability positioning numerically controlled axes
GB/T 12411.3-1990 Test method for linear density of jute and kenaf fibres.Cut middles method
GB/T 24815-2009 Short link chain for lifting purposes.Grade 6,non-calibrated,for chain slings etc.
GB/T 24816-2009 Short link chain for lifting purposes.Grade 8,non-calibrated,for chain slings etc.
GB/T 24814-2009 Short link chain for lifting purposes.Grade 4,non-calibrated,for chain slings etc.
GB/T 18400.5-2001/ISO 107915:1998 Machining Center Inspection Conditions Part 5: Inspection of Positioning Accuracy and Repeated Positioning Accuracy of Workholding Pallets
GB/T 18400.5-2010 Test conditions for machining centres.Part 5:Accuracy and repeatability of positioning of work-holding pallets
GB/T 27613-2011 Hydraulic fluid power - Fluid contamination.Determination of particulate contamination by the gravimetric method
GB/T 18400.4-2010 Test conditions for machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 20947-2007 Short-link chain for lifting purposes-Grade T (types T, DA T and DT), fine-tolerance hoist chain
GB/T 30026-2013 Short link chains for lifting purposes.Grand TH, fine tolerance for manually operated chain hoists
GB/T 30027-2013 Short link chains for lifting purposes.Grand VH, fine tolerance for manually operated chain hoists
GB/T 24814-2023 Steel short link chain for lifting medium precision lifting chain grade 4 stainless steel
GB/T 21457-2008 Cranes and related equipment.Accuracy requirements for measuring parameters during testing
GB/T 16462.4-2007 Test conditions for numerically controlled turning machines and turning centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 33149.2-2016 CNC heavy duty vertical turning and milling lathes with movable single column.Part 2:Testing of the accuracy
GB/T 33203.2-2016 CNC heavy duty movable gantry-type multi-spindle drilling machine.Part 2:Testing of the accuracy
GB/T 24227-2009 Chromium ores and concentrates.Determination of silicon content.Spectrophotometric method and gravimetric method
GB/T 3885.3-1983 Methods for chemical analysis of spodumenite and lepidolite concentrates--The gravimetric-molybdenum blue photometric method for the determination of silicon dioxide content
GB/T 6150.12-2008 Methods for chemical analysis of tungsten concentrates.Determination of silicon dioxide content.The silicomolybdenum blue spectrophotometry and the gravimetry
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results-Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method

Association Francaise de Normalisation, Precision weighing

NF T30-009:1996 Dyestuffs. Determination of solubility in organic solvents. Gravimetric method.
NF ISO 230-2:2014 Code d'essai des machines-outils - Partie 2 : détermination de l'exactitude et de la répétabilité de positionnement des axes à commande numérique
NF B35-515:1983 Laboratory glassware. Glass alcoholometers and alcohol hydrometers not incorporating a thermometer.
NF E60-100-2/A1*NF ISO 230-2/A1:2016 Test code for machine tools - Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes - Amendment 1
NF B35-517:1983 Laboratory glassware. Thermometers for use with alcoholometers and alcohol hydrometers.
NF B35-516:1983 Laboratory glassware. Thermo-alcoholometers and alcoholthermohydrometers.
NF P94-064:1993 Sols : reconnaissance et essais - Masse volumique sèche d'un élément de roche - Méthode par pesée hydrostatique.
NF E60-112:1984 ACCEPTANCE CONDITIONS AND NOMENCLATURE FOR MILLING MACHINES WITH A TABLE OF FIXED HEIGHT WITH HORIZONTAL OR VERTICAL SPINDLE. GENERAL INTRODUCTION AND TESTING OF ACCURACY.
NF ISO 15767:2009 Air des lieux de travail - Contrôle et caractérisation de l'incertitude de pesée des aérosols collectés
NF ISO 10791-5:1998 Conditions d'essai pour centres d'usinage - Partie 5 : précision et répétabilité de positionnement des palettes porte-pieces.
NF E60-100-2*NF ISO 230-2:2014 Test code for machine tools - Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes
NF E60-097:1998 Test code for machine tools. Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes.
NF ISO 230-2/A1:2016 Code d'essai des machines-outils - Partie 2 : détermination de l'exactitude et de la répétabilité de positionnement des axes à commande numérique - Amendement 1
NF P98-250-6:1991 TESTS RELATING TO PAVEMENTS. PREPARATION OF BITUMINOUS MIXTURES. PART 6 : MEASUREMENT OF THE APPARENT SPECIFIC GRAVITY OF A SPECIMEN USING THE HYDROSTATIC METHOD.
NF B42-007:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer.
NF B42-007*NF EN ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer
NF ISO 10791-4:1998 Conditions d'essai pour centres d'usinage - Partie 4 : précision et répétabilité de positionnement des axes linéaires et rotatifs.

ES-AENOR, Precision weighing

UNE 43-346-1987

Group Standards of the People's Republic of China, Precision weighing

T/NTZX 002-2017 Stainless steel short link high-precision chain for lifting purpose
T/CPARK 35-2023 Dimensional accuracy of flame cutting of lifting machinery
T/CAMER 016-2022 Test of accuracy of positioning and repeatability of linear axes for vertical twin-spindle CNC lathe
T/CMTBA 1011.1-2021 CNC heavy vertical milling-turning lathes with movable double column—Part 1:Testing of accuracy

Standard Association of Australia （SAA）, Precision weighing

AS 4350.1:2005 Heavy mineral sand concentrates - Physical testing - Size analysis
AS 2884.4:1997 Heavy mineral sand concentrates - Sampling - Determination of precision and bias
AS 1141.6.1:1995 Methods for sampling and testing aggregates Method 6.1: Particle density and water absorption of coarse aggregate - Weighing - in-waer method

European Committee for Standardization (CEN), Precision weighing

EN ISO 1973:2021 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:2021)
EN ISO 1973:1995 Textile Fibres - Determination of Linear Density - Gravimetric Method and Vibroscope Method (ISO 1973 : 1995)
EN 28206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics (ISO 8206:1991)

German Institute for Standardization, Precision weighing

DIN EN ISO 1973:1995 Textiles - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:1995); German version EN ISO 1973:1995
DIN 12803-2:1981 Laboratory glassware; alcoholometry; alcoholometers for the alcoholic strength by volume
DIN 12791-2:1978-08 Laboratory glassware; density hydrometers, standard sizes, designations
DIN 65569-2:1992-10 Aerospace; reinforcement fibres; determination of density of filament yarns; hydrostatic weighing method
DIN ISO 10791-4:2001 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
DIN EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2001
DIN ISO 15767:2010 Workplace atmospheres - Controlling and characterizing uncertainty in weighing collected aerosols (ISO 15767:2009)
DIN EN ISO 18753:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer (ISO 18753:2004); English version of DIN EN ISO 18753:2006
DIN ISO 10791-4:2001-01 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)

AT-ON, Precision weighing

ONORM M 6775 Teil.4-1987 Accuracy of bevel gears; tolerances for shaft angle errors and common apex errors

GOSTR, Precision weighing

GOST ISO 10791-4-2017 Machining centres. Part 4. Accuracy and repeatability of positioning of linear and rotary axes
GOST ISO 230-2-2016 Test code for machine tools. Part2. Determination of accuracy and repeatability of positioning of numerically controlled axes

Danish Standards Foundation, Precision weighing

DS/ISO 230-2:2007 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
DS/EN 28 206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
DS/ISO 8206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
DS/EN ISO 18753:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer

BR-ABNT, Precision weighing

ABNT NBR 5992-2016 Fuel ethanol - Determination of the density and alcoholic content by hydrometer

British Standards Institution (BSI), Precision weighing

BS 5471:1977 Specification for thermometer for use with alcohol hydrometers
BS 5470:1977 Specification for glass alcohol hydrometers not incorporating a thermometer
BS ISO 5725-2:1995 Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 230-2:2014 Test code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled axes
BS ISO 230-2:2007 Test code for machine tools. Determination of accuracy and repeatability of positioning numerically controlled axes
BS ISO 230-2:2014+A1:2016 Test code for machine tools - Determination of accuracy and repeatability of positioning of numerically controlled axes
BS ISO 16063-42:2014 Methods for the calibration of vibration and shock transducers. Calibration of seismometers with high accuracy using acceleration of gravity
BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 10791-5:1998 Test conditions for machining centres - Accuracy and repeatability of positioning of work-holding pallets
BS EN ISO 18753:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer
BS ISO 10791-4:1998 Test conditions for machining centres - Accuracy and repeatability of positioning of linear and rotary axes

工业和信息化部, Precision weighing

JB/T 13591.1-2019 Double-column symmetrical horizontal machining center Part 1: Accuracy inspection
JB/T 13591.1-2020 Double-column symmetrical horizontal machining center Part 1: Accuracy inspection
JC/T 2528-2019 Method for determination of absolute density of fine ceramic powder: Pycnometer method

International Organization for Standardization (ISO), Precision weighing

ISO 1973:1995 Textiles fibres - Determination of linear density - Gravimetric method and vibroscope method
ISO 1973:2021 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
ISO 10791-5:1998 Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets
ISO 8206:1991 Acceptance tests for oxygen cutting machines; reproducible accuracy; operational characteristics
ISO 10791-4:1998 Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
ISO 3077:2001 Short-link chain for lifting purposes - Grade T, (types T, DAT and DT), fine-tolerance hoist chain
ISO 230-2:1997/Cor 1:1999 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes; Technical Corrigendum 1
ISO 4295:1979 Manganese ores and concentrates — Determination of aluminium content — Photometric and gravimetric methods
ISO 4295:1988 Manganese ores and concentrates; determination of aluminium content; photometric and gravimetric methods
ISO 9373:1989 Cranes and related equipment; accuracy requirements for measuring parameters during testing
ISO 15767:2009 Workplace atmospheres - Controlling and characterizing uncertainty in weighing collected aerosols
ISO 5725:1981 Precision of test methods — Determination of repeatability and reproducibility by inter-laboratory tests
ISO 16063-42:2014 Methods for the calibration of vibration and shock transducers - Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
ISO 230-2:2006 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes (Fourth Edition)
ISO 230-2:2014 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
ISO 230-2:1988 Acceptance code for machine tools; part 2: determination of accuracy and repeatability of positioning of numerically controlled machine tools
ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer
ISO 18753:2004 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer
ISO 230-2:2014/Amd 1:2016 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes; Amendment 1
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

American Society for Testing and Materials (ASTM), Precision weighing

ASTM E252-84(1999) Standard Test Method for Thickness of Thin Foil and Film by Weighing
ASTM E471-96 Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
ASTM E471-96(2002) Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
ASTM E471-22 Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
ASTM E471-96(2016) Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
ASTM E471-96(2011) Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing

AASHTO - American Association of State Highway and Transportation Officials, Precision weighing

MP 14-2005 Standard Specification for Smoothness of Pavement at the Approaches to Weigh-in-Motion (WIM) Scales
MP 14-2012 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
M 331-2017 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
M 331-2013 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
MP 14-2008 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
R 33-2003 Standard Recommended Practice for Calbrating the Reference Load Cell Used for Falling Weight Deflectometer
PP8-1994 Standard Practice for Calibrating the Reference Load Cell Used for Reference Calibrations for Falling Weight Deflectometer (2000 Edition)

Japanese Industrial Standards Committee (JISC), Precision weighing

JIS B 6190-2:2008 Test code for machine tools -- Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
JIS B 6190-2:2016 Test code for machine tools -- Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
JIS B 6192:1999 Test code for machine tools -- Determination of accuracy and repeatability of positioning numerically controlled axes
JIS B 7611-3:2008 Nonautomatic weighing instruments -- Metrological and technical requirements and tests -- Part 3: Weights and poises used in transaction or certification
JIS B 7611-3:2015 Non-automatic weighing instruments -- Metrological and technical requirements and tests -- Part 3: Weights and poises used in transaction or certification

NO-SN, Precision weighing

NS 1183-1964 Metal plating - Determination of coating thickness by pull off and weighing

The American Road & Transportation Builders Association, Precision weighing

AASHTO M 331-2013 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
AASHTO MP 14-2012 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
AASHTO MP 14-2008 Standard Specification for Smoothness of Pavement in Weigh-in-Motion (WIM) Systems
AASHTO R 33-2003(R2008) Standard Recommended Practice for Calibrating the Reference Load Cell Used for Reference Calibrations for Falling Weight Deflectometer
AASHTO PP7-1995 Standard Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer 2000 Edition

Defense Logistics Agency, Precision weighing

DLA A-A-50223 B-2012 SCALE, BEAM INDICATING: WEIGHING, SPECIFIC GRAVITY; CAPACITY 0.01 NOT LESS THAN 200 GRAMS, THREE OR FOUR WEIGHT BEAMS: 0.01 GRAM SENSITIVITY
DLA A-A-50223 A VALID NOTICE 1-2006 SCALE, BEAM INDICATING: WEIGHING, SPECIFIC GRAVITY; CAPACITY 0.01 NOT LESS THAN 200 GRAMS, THREE OR FOUR WEIGHT BEAMS: 0.01 GRAM SENSITIVITY
DLA A-A-50223 A-2001 SCALE, BEAM INDICATING: WEIGHING, SPECIFIC GRAVITY; CAPACITY 0.01 NOT LESS THAN 200 GRAMS, THREE OR FOUR WEIGHT BEAMS: 0.01 GRAM SENSITIVITY
DLA MIL-W-81381/9 D VALID NOTICE 4-2013 Wire, Electric, Fluorocarbon/Polyimide Insulated, Light Weight, Silver Coated High Strength Copper Alloy Conductor, 600 Volts, 200 Degrees C, Nominal 5.8 Mil Wall

Henan Provincial Standard of the People's Republic of China, Precision weighing

DB41/T 2426-2023 Accuracy Requirements for Intelligent Welding of Box Girders for Bridge Cranes

PL-PKN, Precision weighing

PN M06518-1992 Cranes and related equipment - Accuracy requirements for measuring parameters during testing

ZA-SANS, Precision weighing

SANS 6241:2006 Particle size distribution of material of diameter smaller than 75 ?m in fine aggregate (hydrometer method)
SANS 9373:2007 Cranes and related equipment - Accuracy requirements for measuring parameters during testing
SANS 3077:2008 Short-link chain for lifting purposes - Grade T (types T, DAT and DT), fine-tolerance hoist chain
SANS 5725-2:2009 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

American Society of Mechanical Engineers (ASME), Precision weighing

ASME PTC 19.5-2004(R2013) Instruments and apparatus - Part 5: Measurement of quantity of materials - Chapter 1: Weighing Scales
ASME PTC 19.5.1-1964 Instruments and apparatus - Part 5: Measurement of quantity of materials - Chapter 1: Weighing Scales

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Precision weighing

GB/T 24816-2017 Round steel short link chains for general lifting purposes—Grade 8，medium to lerance sling chains for chain slings
GB/T 20485.42-2018 Methods for the calibration of vibration and shock transducers—Part 42: Calibration of seismometers with high accuracy using acceleration of gravity

YU-JUS, Precision weighing

JUS M.G0.101-1991 Acceptance code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled machine tools

国家市场监督管理总局、中国国家标准化管理委员会, Precision weighing

GB/T 30027-2021 Round steel short link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade VH
GB/T 30026-2021 Round steel short link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade TH
GB/T 37516-2019 Specification of care services for intellectual, mental and severe physical disabilities at working age

Association of German Mechanical Engineers, Precision weighing

VDI/VDE 2617 Blatt 2.2-2000 Accuracy of coordinate measuring machines - Parameters and their reverification - Form measurement
VDI/VDE 2617 Blatt 9-2009 Accuracy of coordinate measuring machines - Characteristics and their reverification - Acceptance and reverification tests for Articulated Arm Coordinate Measuring Machines
VDI/VDE 2617 Blatt 2.1-2014 Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement
VDI/VDE 2617 Blatt 2.1-2005 Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement
VDI/VDE 2617 Blatt 5.1-2011 Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with ball plates
VDI/VDE 2617 Blatt 5-2010 Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with artefacts

Lithuanian Standards Office , Precision weighing

LST EN 28206-2000 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics (ISO 8206:1991)

KR-KS, Precision weighing

KS I ISO 15767-2022 Workplace atmospheres Controlling and characterizing uncertainty in weighing collected aerosols
KS B ISO 230-2-2020 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
KS B ISO 16063-42-2017 Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
KS B ISO 10791-5-2016 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-5-2021 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-4-2016 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 10791-4-2021 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS A ISO 5725-2-2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

VN-TCVN, Precision weighing

TCVN 7011-2-2007 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
TCVN 7681-4-2007 Test conditions for numerically controlled turning machine and turning centres.Part 4: Accuracy and repeatability of positioning of linear and rotary axes

PT-IPQ, Precision weighing

NP 1810-1984

Society of Automotive Engineers (SAE), Precision weighing

SAE AS22759/90-2000 Wire, electrical, polytetrafluoroethylene/polyimide insulated, normal weight, nickel coated, high strength or ultra high strength copper alloy, 260°C, 600 volts

Military Standard of the People's Republic of China-General Armament Department, Precision weighing

GJB 8684.21-2015 Pyrotechnic powder performance test methods Part 21: Determination of mass concentration of smoke solid particles Filter membrane weighing method

Professional Standard - Non-ferrous Metal, Precision weighing

YS/T 240.3-2007 Methods for chemical analysis of bismuth concentrate. Determination of silicon dioxide content. Molybdenum blue spectrophotometric method and gravimetric method
YS/T 509.3-2006 Method for Chemical Analysis of Spodumene and Lepidolite Concentrates Gravimetric-Molybdenum Blue Photometric Method for Determination of Silica Content
YS/T 555.2-2009 Methods for chemical analysis of molybdenum concentrate.Determination of silicon dioxide content.Silici molybdenum blue spectrophotometry and gravimetry

BELST, Precision weighing

STB GOST R 8.598-2005 State system for ensuring the uniformity of measurement. Weighbridges for weighing of cinder vehicles in motion. Verification procedure

US-CFR-file, Precision weighing

CFR 40-1065.305-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.305:Verifications for accuracy,repeatability, and noise.