ZH
RU
ES

How liquids are layered

How liquids are layered, Total:68 items.

In the international standard classification, How liquids are layered involves: Physics. Chemistry, Construction materials, Paints and varnishes, Fluid storage devices, Pipeline components and pipelines, Electrical wires and cables, Animal feeding stuffs, Surface treatment and coating, Leather technology, Rubber, Paint coating equipment, Electrical equipment for working in special conditions, Protection against dangerous goods, Plastics, Metrology and measurement in general, Rubber and plastics products, Textile fibres, Materials for the reinforcement of composites, Analytical chemistry, Organic chemicals.

American Society for Testing and Materials (ASTM), How liquids are layered

ASTM D4948-89(2006) Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
ASTM D4948-89(2022) Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
ASTM C836-03 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
ASTM C836-00 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
ASTM D4948-89(2012) Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
ASTM D4948-89(2000)e1 Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
ASTM D4948-89(2016) Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
ASTM C898-95 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
ASTM C898/C898M-09 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
ASTM D6947-07 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D6947-07(2013) Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D6947/D6947M-07(2013)e1 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D6947/D6947M-16 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D4426-96 Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
ASTM D4426-01(2021) Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating

Professional Standard - Machinery, How liquids are layered

JB/T 53146-1999 Vacuum multi-layer insulation cryogenic liquid container product quality classification

Society of Automotive Engineers (SAE), How liquids are layered

SAE AS7378-2020 Test Method for Condition in Container of Liquid Organic Coating Components

European Committee for Standardization (CEN), How liquids are layered

EN ISO 22553-4:2020 Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553-4:2019)
EN 12285-1:2003 Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
EN 12285-2:2005 Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
EN 12285-1:2018 Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings
PD CEN/TS 15968:2010 Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS

International Organization for Standardization (ISO), How liquids are layered

ISO 22553-4:2019 Paints and varnishes — Electro-deposition coatings — Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials
ISO 18768-2:2022 Organic coatings on aluminium and its alloys — Methods for specifying decorative and protective organic coatings on aluminium — Part 2: Liquid coatings
ISO 6179:2017 Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How liquids are layered

GB/T 30040.3-2013 Leak detection systems.Part 3:Liquid systems for tanks
GB/T 30040.4-2013 Leak detection systems.Part 4:Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces

国家能源局, How liquids are layered

SY/T 4113.9-2020 Test methods for performance of pipeline anti-corrosion coatings Part 9: Resistance to liquid medium immersion

PT-IPQ, How liquids are layered

NP 4409-2002 Animal feeding stuffs Determination of furazolidone content Method using high-performance liquid chromatography

British Standards Institution (BSI), How liquids are layered

BS 7793-2:1996 Vitreous enamel coatings for use on bolted steel panels - Specification for coatings on bolted steel panels for use in industrial liquid storage tanks
BS 3900-J7:1993 Methods of test for paints - Testing of coating powders - Determination of density of coating powders by liquid displacement pyknometer
21/30398615 DC BS ISO 18768-2. Organic coatings on aluminium and its alloys. Method for specifying decorative and protective organic coating on aluminium. Part 2. Liquid coatings
BS EN 12285-2:2005(2006) Workshop fabricated steel tanks — Part 2 : Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non - flammable water polluting liquids
BS 3900-A10:1998 Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating

RU-GOST R, How liquids are layered

GOST R ISO 17226-1-2008 Leather. Chemical determination of formaldehyde content. Part 1. Method using high performance liquid chromatografy
GOST R 8.735.2-2013 State system for ensuring the uniformity of measurements. State hierarchy scheme for measuring instruments of the content of organic components in liquid and solid mediums and materials. Transfer of the units from the state primary standard based on liqui
GOST 30351-2001 Polyamides, polyamide fibres, fabrics, films. Determination of mass fraction of residual caprolactam and low-molecular compounds and their concentration of migration in water. Methods of liquid and gas-liquid chromatography

Danish Standards Foundation, How liquids are layered

DS/EN 1062-3:2008 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability
DS/CEN/TS 15968:2011 Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS

Lithuanian Standards Office , How liquids are layered

LST EN 1062-3-2008 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability

AENOR, How liquids are layered

UNE-EN 1062-3:2008 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability
UNE 62350-3:2011 Steel storage tanks for carburant and combustible liquids. Tanks with capacity greater than 3 000 litres. Part 3: Horizontal double skin tanks (steel-polyethylene).
UNE 62350-4:2011 Steel storage tanks for carburant and combustible liquids. Tanks with capacity greater than 3 000 litres. Part 4: Horizontal double skin tanks (steel-glassfibre reinforced plastic).

Association Francaise de Normalisation, How liquids are layered

NF T35-020*NF EN 13966-1:2003 Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1 : flat panels.
NF EN 14879-6:2010 Systèmes des revêtements organiques pour la protection des appareils et installations industriels contre la corrosion par des fluides agressifs - Partie 6 : revêtements rapportés associés à des couches de carreaux et de briques
NF T30-312-4*NF EN ISO 22553-4:2020 Paints and varnishes - Electro-deposition coatings - Part 4 : compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials
NF E86-401-1:2003 Workshop fabricated tanks - Part 1 : horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids.
NF E86-401-2*NF EN 12285-2:2005 Workshop frabricated steel tanks - Part 2 : horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids.
NF C23-550-1*NF EN 50050-1:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 1 : hand-held spraying equipment for ignitable liquid coating materials
NF EN ISO 6179:2018 Caoutchouc vulcanisé ou thermoplastique - Feuilles de caoutchouc et supports textiles revêtus de caoutchouc - Détermination du taux de transmission des liquides volatils (technique gravimétrique)

German Institute for Standardization, How liquids are layered

DIN EN 13966-1 Berichtigung 1:2007 Determination of the transfer effeciency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels; German version EN 13966-1:2003, Corrigenda to DIN EN 13966-1:2003-09
DIN EN ISO 22553-4:2021 Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553-4:2019); German version EN ISO 22553-4:2020
DIN EN 12285-2:2005 Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids; German version EN 12285-2:2005
DIN EN 12285-1:2003 Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids; German version EN 12285-1:2003
DIN 3476-1:2018-08 Valves - Requirements and tests - Part 1: Protection against corrosion by epoxy coating of coating powders (P) or liquid varnishes (F)
DIN CEN/TS 15968:2010-11*DIN SPEC 1038:2010-11 Determination of extractable perfluorooctanesulfonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS; German version CEN/TS 15968:2010
DIN EN 12285-2:2005-05 Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids; German version EN 12285-2:2005 / Note: DIN 6616 (1989-09) remains val...
DIN EN ISO 6179:2017-12 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017); German version EN ISO 6179:2017
DIN EN 50050-1:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials; German version EN 50050-1:2013
DIN EN 12285-1:2018-12 Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings; German version EN 1228...
DIN EN 12285-4:2022-07 Workshop fabricated steel tanks - Part 4: Vertical cylindrical single skin and double skin tanks for the aboveground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings; German and English versi...
DIN EN 12285-3:2019-06 Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings; German version EN 12285-3:2019

Professional Standard-Safe Production, How liquids are layered

AQ 3020-2008 Workshop fabricated steel tanks.Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids

ES-UNE, How liquids are layered

UNE-EN ISO 6179:2018 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)
UNE-EN 12285-2:2005 ERRATUM:2006 Workshop fabricated steel tanks. Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
UNE-EN 12285-3:2019 Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings

BELST, How liquids are layered

STB 17.13.05-37-2015 Environmental protection and nature use. Analytical (laboratory) control and monitoring. Atmospheric air. Determination of sulphate-ion concentration in liquid matrix

IT-UNI, How liquids are layered

UNI 7039-1972