ZH
RU
ES

purpose of metal

purpose of metal, Total:496 items.

In the international standard classification, purpose of metal involves: Protection against fire, Electrical engineering in general, Corrosion of metals, Surface treatment and coating, Fasteners, Production of metals, Testing of metals, Shipbuilding and marine structures in general, Mining equipment, Integrated circuits. Microelectronics, Bearings, Particle size analysis. Sieving, Analytical chemistry, Rubber, Leather technology, Non-ferrous metals, Powder metallurgy, Welding, brazing and soldering, Quality, Cutting tools, Woodworking equipment, Inorganic chemicals, Semiconductor devices, Occupational safety. Industrial hygiene, Jewellery, Products of the chemical industry, Packaging and distribution of goods in general, Aircraft and space vehicles in general, Paints and varnishes, Cereals, pulses and derived products, Test conditions and procedures in general, Electronic components in general, Ferroalloys, Vibrations, shock and vibration measurements, Iron and steel products, Photography, Valves, Capacitors, Earthworks. Excavations. Foundation construction. Underground works, Construction equipment, Thermodynamics and temperature measurements, Vocabularies, Dentistry, Hydraulic energy engineering, Organic chemicals, Adhesives, Metalliferous minerals, Construction materials, Medical equipment, Horology, Linear and angular measurements, Insulating materials, Environmental testing, Sensory analysis, Character sets and information coding, Pipeline components and pipelines.


Korean Agency for Technology and Standards (KATS), purpose of metal

  • KS C IEC 60707:2004 Flammability of solid non-metallic materials when exposed to flame sources－List of test methods
  • KS M ISO 806:2003 Aluminium oxide primarily used for the production of aluminium-Determination of loss of mass at 1 000℃ and 1 200℃
  • KS M ISO 806:2013 Aluminium oxide primarily used for the production of aluminium－Determination of loss of mass at 1 000℃ and 1 200℃
  • KS D ISO 3927:2012 Metallic powders, excluding powders for hardmetals－Determination of compactibility(compressibility) in uniaxial compression
  • KS M ISO 2813:2007 Paints and varnishes-Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°
  • KS D ISO 4490:2010 Metallic powders-Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
  • KS D ISO 4490:2013 Metallic powders－Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
  • KS C IEC 60707-2004(2014) Flammability of solid non-metallic materials when exposed to flame sources－List of test methods
  • KS D 0035-2006 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
  • KS D 0035-1985 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
  • KS D 8337-2003(2008) Electroplated coatings of gold and gold alloy for engineering purposes
  • KS P 5317-2008 DENTAL CASTING PRECIOUS ALLOYS FOR METAL CERAMICS
  • KS D 0035-2011 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
  • KS M 1948-2002(2007) Acetic acid for industrial use－Method of test－Visual limit test for heavy metals (including iron)
  • KS D ISO 11306:2009 Corrosion of metals and alloys-Guidelines for exposing and evaluating metals and alloys in surface sea water
  • KS D ISO 11306:2019 Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water
  • KS D 0044-2014(2019) Methods of sampling for chemical analysis of ferroalloys[(3) ferrophosphorus, manganese metal, silicon metal, chromium metal, calcium silicon and ferroboron]
  • KS W 0916-2013 CLASSIFICATION AND INSPECTION OF FERROUS AND NON-FERROUS RAW METAL CASTINGS
  • KS D ISO 4491-2:2008 Metallic powders-Determination of oxygen content by reduction methods-Part 2:Loss of mass on hydrogen reduction (hydrogen loss)
  • KS C 0291-2002(2018) Environmental testing－Flammability of solid non－metallic materials when exposed to flame sources-list of test methods
  • KS X 6722-1-2014 Electronic catalog — Part 1: Specification of product attributes
  • KS X 6722-1-2004 Electronic Catalog-Part 1:Specification of Product Attributes
  • KS X 6722-1-2014(2019) Electronic catalog — Part 1: Specification of product attributes
  • KS C 8459-2005(2020) Fittings for flexible metal conduits
  • KS C 8459-1997 Fittings for flexible metal conduits

U.S. Air Force, purpose of metal

International Organization for Standardization (ISO), purpose of metal

  • ISO/TR 7655:2022 Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants
  • ISO 6158:2018 Metallic and other inorganic coatings — Electrodeposited coatings of chromium for engineering purposes
  • ISO 11596:2021 Jewellery and precious metals — Sampling of precious metals and precious metal alloys
  • ISO 9202:2019 Jewellery and precious metals — Fineness of precious metal alloys
  • ISO 3927:2001 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
  • ISO 3927:1985 Metallic powders, excluding powders for hardmetals; Determination of compactibility (Compressibility) in uniaxial compression
  • ISO 17918:2015 Corrosion of metals and alloys - Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
  • ISO 2813:1978 Paints and varnishes; Measurement of specular gloss of non-metallic paint film at 20 degrees, 60 degrees and 85 degrees
  • ISO/R 956:1969 Tensile test for light metal and light metal alloy wires
  • ISO/R 952:1969 Tensile testing of light metal and light metal alloy tubes
  • ISO/R 953:1969 Drift expanding test on light metal and light metal alloy tubes
  • ISO 22764:2020 Jewellery and precious metals — Fineness of solders used with precious metal jewellery alloys
  • ISO 23226:2020 Corrosion of metals and alloys - Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water
  • ISO 2063:1973 Metallic coatings; Protection of iron and steel against corrosion; Metal spraying of zinc and aluminium
  • ISO 27831-2:2008 Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 2: Non-ferrous metals and alloys
  • ISO 27831-1:2008 Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Part 1: Ferrous metals and alloys
  • ISO/CD 8044 Corrosion of metals and alloys — Vocabulary
  • ISO 8044:2020 Corrosion of metals and alloys — Vocabulary
  • ISO 2740:2009 Sintered metal materials, excluding hardmetals - Tensile test pieces
  • ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
  • ISO 4491-2:1989 Metallic powders; determination of oxygen content by reduction methods; part 2: loss of mass on hydrogen reduction (hydrogen loss)
  • ISO 4491-2:2023 Metallic powders — Determination of oxygen content by reduction methods — Part 2: Loss of mass on hydrogen reduction (hydrogen loss)
  • ISO 3690:1977 Welding; Determination of hydrogen in deposited weld metal arising from the use of covered electrodes for welding mild and low alloy steels
  • ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method

RO-ASRO, purpose of metal

  • SR ISO 4521:1994 Metallic coatings. Electrodeposited silver alloy coatings for engineering purposes
  • SR ISO 4523:1985 Metallic coatings - Electrodeposited gold and gold alloy coatings for engineering purposes
  • STAS 9698-1974 NONFERROUS METALS AND ALLOYS Sampling and sample preparation for carrying out chemical analysis
  • STAS 11037-1978 Tests of metals TESTS TO DETERMINE THE COMPATIBILITY OF FILLER METAL IN THEGAS WELDING OF STEELS
  • STAS SR EN 10002-5-1995 Metaliic materials. Tensile testing. Part 5: Method of testing at elevated temperatura
  • STAS 6679/19-1985 METAL CUTTJNG MACHlNE-TOOI.S CIHECK1NG METHODS OF MINIMUM MOVEMENT TOLERAN- CE3 AT SUCCESIVE SETTlNGS
  • STAS 2345-1982 Metallic furniture SAFETY LOCKS FOR METALLIC CASES
  • STAS 10385-1975 Testing of metals DRIFT EXPANDING TEST ON LIGHT METAL AND LIGHT METAL ALLOY TUBES
  • STAS 1750-1980 Testing of metals TWISTING TEST FOR WIRE
  • STAS 6222-1980 Metallic packings VASELINE CANS
  • STAS 1750-1990 Tests of metals. Twisting test for wire
  • STAS 10417-1975 Tests of metals SIMPLE BEND TEST FOR LIGHT METAL AND LIGHT METAL ALLOY SHEETS AND STRIPS
  • STAS 12072-1982 Testing of metals TESTING OF PLATED STEELS AT SHEARING STRENGTH
  • STAS 9018-1984 Metal testing TESTING OF DEPOSITED METAL FOR BRAZE WELDING
  • STAS 12620-1988 Brazing of metals FILLER METALS FOR BRAZING COPPER-PHOSPHORUS AND COPPER-PHOSPHORUS-SILVER ALLOYS
  • STAS 11281/1-1979 Metals tests. DETERMINATION OF WELDING METALS COMPATIBILITY WITH THE BASIC METAL FOR CAST WELDING Covered electrodes welding.
  • STAS E 11594-1983 TESTING OF METALS Determination of the influence of the soldering alloy on the characteristics of the parent metal
  • STAS 11281/2-1979 Mct&ls tests DETERMINATION OF WELDING METALS COMPATIBILITY WITH THE BASIC METAL FOR CAST WELDING Flux shielded arc welding
  • STAS SR EN 23312-1995 Sintered metal materials and hardmetals. Determination of Young modulus
  • STAS 8127-1990 METALLIC BOXES FOR REFUSES

PL-PKN, purpose of metal

  • PN H04680-1974 Corrosion protection Temporary protection of metal Terminology
  • PN H01705-1987 Nonferrous Desiqnations of grades for metals and alloys
  • PN M55652-1961 Metal Cut?ing Machin? Tools. Test Conditions for Parallel Lathes with Dia- meter of Turn upon Bed to 1000 mm
  • PN M55658-1960 Metal CuHinq Machin? Tools. Test Con- ditions for Turret Lathes with Diamefer of Tum upon Bed over 630 mm
  • PN M41250-1955 Metallic Raschig's rings
  • PN M55653-1961 Metal Cutting Machin? — Tools. Test Conditions tor Parallel Lathes with Dia- meter ot Turn opon Bed over 1000 to 1600 rnm
  • PN A86034-04-1993 Milk and milk products. Microbiological examination. Enumeration of microorganisms-colony count technique at 30 degree C
  • PN H04412-1962 Flattening ?est for me?als

Aerospace Industries Association/ANSI Aerospace Standards, purpose of metal

CZ-CSN, purpose of metal

VN-TCVN, purpose of metal

  • TCVN 5594-1991 Corrosion protection.Inorganic metallic and non-metallic coatings.Visual quality control of external form
  • TCVN 5407-1991 Corrosion protection.Temporary metal protection facilities.Classification and coding
  • TCVN 2101-2008 Paints and varnishes.Determination of specular gloss of non-metallic paint films at 20 degrees,60 degrees and 85 degrees
  • TCVN 5405-1991 Corrosion protection.Metals, alloys, metallic and non-metallic inorganic coatings.Accelerate testing in salt-spray cabinet of neutral natrium chloride solution (method NSS)

RU-GOST R, purpose of metal

  • GOST 25536-1982 Metals scales of images on photographs at metallographec examination
  • GOST 9651-1984 Metals. Methods of tension tests at elevated temperatures
  • GOST 21981-1976 Sealants. Determination method of bond strength with metal at peeling
  • GOST 4.442-1986 Product-quality index system. Metal-and wood-cutting tools. Index nomenclature
  • GOST 31975-2013 Paints materials. Method for determination of gloss of non-metallic paint films at 20°, 60°and 85°
  • GOST 9.005-1972 Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and non-metals
  • GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
  • GOST 27041-1986 Ferroalloys, metal chromium and metal manganese. Methods of sulphur determination
  • GOST 27069-1986 Ferroalloys, metal chromium and metal manganese. Methods for determination of carbon
  • GOST 29012-1991 Powder metallurgy. Method of determination of compacts dimensional changes after compacting pressure relief and at the time of sintering
  • GOST 9.103-1978 Unified system of corrosion and ageing protection. Temporary prevention of metal and products. Terms and definitions
  • GOST 16698.13-1993 Metallic manganese and nitrated manganese. Method for determination of nitrogen
  • GOST 16698.13-1984 Metallic manganese. Method for determination of nitrogen
  • GOST 18897-1998 Metallic powders. Determination of oxygen content by reduction methods. Loss of mass on hydrogen reduction (hydrogen loss)
  • GOST 18897-1973 Metal powder. Method for determination of metal powders losses while heating it in hydrogen
  • GOST 16698.12-1984 Metallic manganese and nitrated metallic manganese. Method for determination of calcium and magnesium
  • GOST R IEC 730-2-7-1994 Automatic electrical conutrols for household and similar use. Particular requirements for timers and time switches and test methods

German Institute for Standardization, purpose of metal

  • DIN 50929-1:1985 Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; general
  • DIN 31665:1993 Plain bearings; testing of bearing metals; resistance to corrosion by lubricants and static conditions
  • DIN 50929-1:2017 Corrosion of metals - Corrosion likelihood of corrosion of metallic materials when subject to corrosion from the outside - Part 1: General
  • DIN 50929-1:2017-03 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 1: General
  • DIN ISO 4783-3:1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 3: Preferred combinations for pre-crimped or pressure-welded wire screens; identical with ISO 4783-3:1981
  • DIN 50929-2:2017-03 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 2: Service components inside buildings
  • DIN 50929-2:2017 Corrosion of metals - Corrosion likelihood of corrosion of metallic materials when subject to corrosion from the outside - Part 2: Service components inside buildings
  • DIN 50929-3:1985 Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components
  • DIN EN ISO 9202:2019-09 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019); German version EN ISO 9202:2019
  • DIN ISO 4783-2:1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 2: Preferred combinations for woven wire cloth; identical with ISO 4783-2:1989
  • DIN 50929-3:2023-08 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 3: Buried and underwater pipelines and structural components / Note: Date of issue 2023-07-07*Intended as replacement for DIN 50929-3 (20...
  • DIN 50929-3:2018-03 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 3: Buried and underwater pipelines and structural components
  • DIN 50929-3 Beiblatt 1:2014-11 Corrosion of metals - Probability of corrosion of metallic materials when subject to corrosion from the outside - Part 3: Buried and underwater pipelines and structural components; Supplement 1: Corrosion rates of structural components in water
  • DIN 50929-3:2018 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 3: Buried and underwater pipelines and structural components
  • DIN 8571:1981 Filler metals and auxiliary metals for metal welding; Concepts, Classification
  • DIN EN 13523-22:2023-08 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison; German and English version prEN 13523-22:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-22 (2017-05).
  • DIN EN 13523-22:2017-05 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison; German version EN 13523-22:2017
  • DIN EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019)
  • DIN EN 1904:2001-02 Precious metal - The finenesses of solders used with precious metal jewellery alloys; German version EN 1904:2000
  • DIN 51212:1978 Testing of Metallic Materials; Torsion Test of Wires
  • DIN EN 174:2001-07 Personal eye-protection - Ski goggles for downhill skiing; German version EN 174:2001
  • DIN EN 1904:2001 Precious metal - The finenesses of solders used with precious metal jewellery alloys; German version EN 1904:2000
  • DIN 1725-5 Bb.1:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition; information on alloying processes
  • DIN 1546:1954-06 Diamond dies for wires of ferrous and non-ferrous metals
  • DIN 50134:2008 Testing of metallic materials - Compression test of metallic cellular materials
  • DIN 2032:1987 Metal packages; screwed closures of light gauge metal
  • DIN EN ISO 21968:2020-02 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019); German version EN ISO 21968:2019
  • DIN V 30995:1999 Sintered metal materials, excluding hardmetals - Metallographic preparation and examination (ISO/TR 14321:1997)
  • DIN 51215:1975 Testing of Metallic Materials; Wrapping Test for Wires; General Information
  • DIN EN ISO 8044:2020-08 Corrosion of metals and alloys - Vocabulary (ISO 8044:2020); Trilingual version EN ISO 8044:2020
  • DIN EN 62374-1:2011-06 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers (IEC 62374-1:2010); German version EN 62374-1:2010 + AC:2011
  • DIN 50134:2008-10 Testing of metallic materials - Compression test of metallic cellular materials
  • DIN EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005); German version EN ISO 21968:2005
  • DIN 50919:2016 Corrosion of metal - Corrosion investigations of bimetallic corrosion in electrolytic solutions

Professional Standard-Ships, purpose of metal

  • CB 1065-1987 Man-hour quota for metal propeller manufacturing
  • CB 1073-1989 Man-hour quotas for manufacturing metal structural parts of marine diesel engines
  • CB 1080.2-1989 Man-hour quota welding of special auxiliary equipment and metal structural parts
  • CB 1085.1-1989 Non-ferrous metal sand casting with man-hour quota for instrumentation manufacturing
  • CB 1080.1-1989 Man-hour quota assembly and lofting of metal structural parts for special auxiliary equipment
  • CB 1080.3-1989 Special Auxiliary Machines Armed Metal Structural Parts Manufacturing Working Hours Quota Cold Processing, Fireworks, Gas Cutting

HU-MSZT, purpose of metal

Professional Standard-Safe Production, purpose of metal

  • AQ/T 2075-2019 Safety inspection and inspection catalog of equipment and facilities in use in metal and nonmetal mines

Professional Standard - Electron, purpose of metal

  • SJ 20802-2001 Visual inspection criteria for integrated circuits metal packages

(U.S.) Ford Automotive Standards, purpose of metal

Standard Association of Australia （SAA）, purpose of metal

  • AS 3978:2003 Non-destructive testing - Visual inspection of metal products and components
  • AS 2403:2008 Metallic materials - Sheet and strip - Determination of plastic strain ratio
  • AS 4036:2006 Corrosion of metals - Dissimilar metals in contact in seawater
  • AS 2140:2008

Association Francaise de Normalisation, purpose of metal

  • NF EN 16602-70-45:2015 Assurance produit des projets spatiaux - Essais mécaniques des matériaux métalliques
  • NF P93-523:2002 Building site equipment - Temporary metallic stairways intended for public use
  • NF A06-620*NF ISO 11596 :2022 Jewellery and precious metals - Sampling of precious metals and precious metal alloys
  • NF EN 12730:2015 Assurance produit des projets spatiaux - Anodisation noire des métaux avec colorants non organiques
  • NF EN 16631:2015 Assurance produit des projets spatiaux - Anodisation noire des métaux avec colorants non organiques
  • NF EN 16602-70-03:2015 Assurance produit des projets spatiaux - Anodisation noire des métaux avec colorants non organiques
  • NF EN 16602-70-37:2016 Assurance produit des projets spatiaux - Détermination de la susceptibilité des métaux à la fissuration par corrosion sous contrainte
  • NF EN 16602-70-39:2018 Assurance produit des projets spatiaux - Soudagee de matériaux métalliques pour matériel de vol
  • NF A07-020*NF EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys
  • NF P93-340:1994 Building site equipment. Temporary metallic building site railings.
  • NF EN ISO 13517:2020 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson)
  • NF EN ISO 4490:2018 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (appareil de Hall)
  • NF C96-017-1*NF EN 62374-1:2011 Semiconductor devices - Part 1 : time-dependent dielectric breakdown (TDDB) test for inter-metal layers.
  • NF A70-022*NF ISO 22764:2020 Jewellery and precious metals - Fineness of solders used with precious metal jewellery alloys
  • NF A91-202:1979 Metallic coatings. Refilling for spray coating.
  • NF A70-021:2001 Precious metals - The finenesses of solders used with precious metal jewellery alloys.
  • FD X50-138:2006 Project management - Time-related management - Organisation, Planing, Coordination
  • NF A91-012:1977 Revêtements métalliques - Pièce d'usure protégée par revêtement métallique
  • NF T60-166:1994 Produits de protection temporaire contre la corrosion - Méthode de préparation des éprouvettes métalliques pour évaluation des propriétés des produits de protection
  • NF EN ISO 21968:2019 Revêtements métalliques non magnétiques sur des matériaux de base métalliques et non métalliques - Mesurage de l'épaisseur de revêtement - Méthode par courants de Foucault sensible aux variations de phase
  • NF A05-308:1995 Corrosion of metals and alloys. Determination of bimetallic corrosion in outdoor exposure corrosion tests.
  • NF EN 13029:2010 Emballage - Emballages métalliques légers - Ouverture de récipients métalliques équipés de goulots en matière plastique
  • NF A05-001*NF EN ISO 8044:2020 Corrosion of metals and alloys - Vocabulary
  • NF A95-322*NF EN ISO 2740:2009 Sintered metal materials, excluding hardmetals - Tensile test pieces
  • NF ISO 1651:1995 Mandrins d'étirage de tubes, à noyau en métaux-durs (carbures métalliques) - Dimensions.
  • NF A91-321:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method.
  • NF C26-212:1989 Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources.
  • NF A91-321*NF EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method

YU-JUS, purpose of metal

  • JUS C.A3.012-1985 Testing of metals. Steel — Macrographic examination by sulphurprint (Baumann method)
  • JUS C.A2.030-1990 Metaliic potfders, excluding powders for hardmetals. Determlnation of compactibi-llty (compresslbllity) in uniaxlal compression
  • JUS C.A4.018-1986 Mechanical testing ofmetals. Reverse bend test of wire
  • JUS C.A5.020-1990 Corrosion of metsls sml alloys. Determinatioa of himctallic corrosion in outdoor exposurc corrosion tests
  • JUS C.A4.019-1986 Mechanlcal testing ofmetals. VVrapping test of wire
  • JUS B.C1.029-2001 Calcium-sulfate - cement setting time regulator Classification and technical conditions
  • JUS M.D4.004-1989 Industrial wire screens and woven wire cloth. Aperture size and wire diameter combinations for waven wire cloth
  • JUS C.A2.035-1987 Physical tests of meta/s. Determinatlon ofparticle si?e of metal Iic powders by dry sleving

National Association of Corrosion Engineers (NACE), purpose of metal

  • NACE RP0497-1997 Field Corrosion Evaluation Using Metallic Test Specimens (Item No:21083)
  • NACE TM0208-2008 Laboratory Test to Evaluate the Vapor-Inhibiting Ability of Volatile Corrosion Inhibitor Materials for Temporaryof Ferrous Protection Metal Surfaces Item No. 21253
  • NACE 10A392-2006 Effectiveness of Cathodic Protection on Thermally Insulated Underground Metallic Structures (Item No. 24156)
  • NACE SP0169-2007 Control of External Corrosion on Underground or Submerged Metallic Piping Systems Item No. 21001
  • NACE MR0176-1994 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments (Item No. 21303)
  • NACE NO. 1-2004 Joint Surface Preparation Standard White Metal Blast Cleaning Item No. 21065

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, purpose of metal

  • GB/T 31310-2014(英文版) Metallic materials—Determination of residual stress—Hole drilling straingage method
  • GB/T 7532-2008 Determination of heavy metals in organic chemical products,.Visual colorimetry
  • GB/T 5158-1999 Metallic powders--Determination of loss of mass on hydrogen reduction (hydrogen loss)
  • GB/T 6276.9-1986 Ammonium hydrogen carbonate for industrial use--Determination of heavy metal content--Visible turbidimetric method
  • GB/T 24179-2009(英文版) Metallic materials—Residual stress determination—The indentation straingage method
  • GB/T 11020-2005 Flammability of solid non-metallic meterials when exposed to flame sources-List of test methods
  • GB 7532-1987 Organic chemical products－Determination of heary metals content－General method－Visual limit test
  • GB/T 50951-2013 Design document preparation standard of construction project for nonferrous mine
  • GB/T 51023-2014 Standards for the preparation of design documents for non-ferrous metal smelting engineering construction projects
  • GB/T 7532-1987 Organic products for industrial use--Determination of content of heavy metals content--General method--Visual limit test
  • GB/T 21198.4-2007 Determination of precious metals in precious metals jewellery alloys.Method using ICP spectrometry.Part 4: 999‰ precious metals jewellery alloys.Determination of precious metals.Difference method
  • GB/T 6276.9-2010 Determination of ammonium hydrogen carbonate for industrial use-Part 9:Heavy metal content-Visible turbidimetric method
  • GB/T 19747-2005 Corrosion of metals and alloys.Determination of bimetallic Corrosion in outdoor exposure corrosion tests
  • GB/T 41706-2022 Metallic powders—Test method for determination of non-metallic inclusions in metal powders for powder forging
  • GB/T 5158.2-2011 Metallic powders.Determination of oxygen content by reduction methods.Part 2: Loss of mass on hydrogen reduction(Hydrogen loss)
  • GB/T 5776-2023 Corrosion of metals and alloys Guidelines for exposure and assessment of metals and alloys in surface seawater
  • GB/T 5776-2005 Corrosion of metals and alloys-Guidelines for exposing and evaluating metals and alloys in surface sea water

BE-NBN, purpose of metal

  • NBN T 04-025-1983 Acetic acid for industrial use - Visual limit test for heavy metals (including iron)
  • NBN-EN 348-1993 Protective clothing. Test method: Determination of behaviour of materials on impact of small splashes of molten metal
  • NBN-EN 24499-1993 Hardmetals. Metallographic determination of microstructure (ISO 4499: 1978)

TR-TSE, purpose of metal

  • TS 279-1965 CREEP AND TIME FOR RUPTURE TENS?ON TESTS ON METALLIC MATERIALS

水利部, purpose of metal

  • SL/T 749-2017 Vibration aging and effect assessment of hydraulic metal structures

American Society for Testing and Materials (ASTM), purpose of metal

  • ASTM E1457-19 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
  • ASTM E1457-07e3 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
  • ASTM D1611-00 Standard Test Method for Corrosion Produced by Leather in Contact with Metal
  • ASTM D1611-00(2005) Standard Test Method for Corrosion Produced by Leather in Contact with Metal
  • ASTM E1457-00 Standard Test Method for Measurement of Creep Crack Growth Rates in Metals
  • ASTM E1457-07e1 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
  • ASTM D1611-00(2010) Standard Test Method for Corrosion Produced by Leather in Contact with Metal
  • ASTM E1457-19e1 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
  • ASTM E1457-07e4 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
  • ASTM E1457-15 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
  • ASTM E22-41 Recommended Practice for Conducting Long-Time High-Temperature Tension Test of Metallic Materials
  • ASTM E1457-07 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
  • ASTM B330-02 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
  • ASTM E2534-20 Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
  • ASTM E601-07e1 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM E601-07 Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM E601-81(1997) Standard Test Method for Comparing EMF Stability of Single-Element Base-Metal Thermocouple Materials in Air
  • ASTM E601-20 Standard Guide for Measuring Electromotive Force (EMF) Stability of Base-Metal Thermoelement Materials With Time in Air
  • ASTM E601-15 Standard Guide for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
  • ASTM E2295-21 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
  • ASTM E209-00 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
  • ASTM D1062-08(2023) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
  • ASTM E1909-13 Standard Guide for Time-Intensity Evaluation of Sensory Attributes
  • ASTM E1909-11 Standard Guide for Time-Intensity Evaluation of Sensory Attributes
  • ASTM F1123-87(2004) Standard Specification for Non-Metallic Expansion Joints

国家市场监督管理总局、中国国家标准化管理委员会, purpose of metal

  • GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures
  • GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures
  • GB/T 11376-2020 Metallic and other inorganic coatings—Phosphate conversion coating of metals
  • GB/T 10123-2022 Corrosion of metals and alloys—Vocabulary

Hebei Provincial Standard of the People's Republic of China, purpose of metal

  • DB13/T 2520-2017 Safety inspection and inspection catalog of equipment and facilities with high risk in use in metal and nonmetal mines

Shandong Provincial Standard of the People's Republic of China, purpose of metal

  • DB37/T 2387-2013 Safety inspection and inspection catalog of equipment and facilities with high risk in use in metal and nonmetal mines

WRC - Welding Research Council, purpose of metal

FI-SFS, purpose of metal

Professional Standard - Light Industry, purpose of metal

  • QB/T 3815-1999 Thickness testing method of the metal deposits for the light industrial products.Timekeeping of liquid flow method
  • QB/T 2268-1996 General technical requirements for finishing exterior parts of chronograph instruments Paint coatings for metal exterior parts of clocks

Association of German Mechanical Engineers, purpose of metal

United States Navy, purpose of metal

Society of Automotive Engineers (SAE), purpose of metal

  • SAE J1066-1974 Recommended Guidelines for Company Metrication Programs in the Metalworking Industry
  • SAE AMS5917-2022 Metal Injection Molded Nickel Based Alloy 718 Parts Hot Isostatically Pressed, Solutioned and Aged
  • SAE AS1105A-2006 Service Time Coding of Propulsion Engine Items
  • SAE AS1105-1995 SERVICE TIME CODING OF PROPULSION ENGINE ITEMS
  • SAE J288A-1976 METALLIC AND NONMETALLIC NONPRESSURE INTEGRAL FUEL TANK–SNOWMOBILE

Professional Standard - Chemical Industry, purpose of metal

  • HG/T 5043-2016 Phosphorus pentachloride for industrial use.Determination of heavy metal content.Visual colorimetry
  • HG/T 4209-2011 Phosphorus trichloride for industrial use.determination of heavy metal content-visual colorimetry
  • HG/T 4212-2011 Phosphorus oxychloride for industrial use.determination of heavy metal content.visual colorimetry

British Standards Institution (BSI), purpose of metal

  • BS EN ISO 3927:2002 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression
  • BS EN 62374-1:2010 Semiconductor devices. Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
  • BS 7541:1992 Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage
  • 21/30423079 DC BS ISO 11596. Jewellery and precious metals. Sampling of precious metals and precious metal alloys
  • BS ISO 17918:2015 Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
  • BS ISO 11596:2021 Tracked Changes. Jewellery and precious metals. Sampling of precious metals and precious metal alloys
  • BS 6615:1996 Specification for dimensional tolerances for metal and metal alloy castings
  • BS EN ISO 4490:2002 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
  • BS EN ISO 4491-2:1999 Metallic powders - Determination of oxygen content by reduction methods - Loss of mass on hydrogen reduction (hydrogen loss)
  • BS ISO 27831-2:2009 Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces. Non-ferrous metals and alloys
  • BS ISO 27831-1:2009 Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces. Ferrous metals and alloys
  • BS ISO 27831-2:2008 Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Non-ferrous metals and alloys
  • BS ISO 27831-1:2008 Metallic and other inorganic coatings - Cleaning and preparation of metal surfaces - Ferrous metals and alloys
  • 19/30367136 DC BS ISO 22764. Jewellery and precious metals. Precious metal. Fineness of solders used with precious metal jewellery alloys
  • BS EN ISO 9202:2019 Tracked Changes. Jewellery and precious metals. Fineness of precious metal alloys
  • BS EN 1708-3:2012 Welding. Basic weld joint details in steel. Clad, buttered and lined pressurized components
  • BS ISO 17340:2020 Metallic materials. Ductility testing. High speed compression test for porous and cellular metals
  • BS EN ISO 17072-2:2019 Leather. Chemical determination of metal content. Total metal content
  • BS EN ISO 17072-1:2011 Leather. Chemical determination of metal content. Extractable metals
  • BS EN ISO 17072-2:2011 Leather. Chemical determination of metal content. Total metal content
  • BS 7909:2023 Temporary electrical systems for entertainment and related purposes. Code of practice
  • BS EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non- metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
  • BS ISO 11877:2008 Hardmetals - Determination of silicon in cobalt metal powders - Photometric method
  • BS ISO 22764:2020 Jewellery and precious metals. Fineness of solders used with precious metal jewellery alloys
  • BS ISO 23226:2020 Corrosion of metals and alloys. Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water
  • BS EN ISO 4490:2014 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
  • BS EN ISO 4490:2008 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
  • BS EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method

Ningxia Provincial Standard of the People's Republic of China, purpose of metal

  • DB64/T 1176-2016 Procedures for the preparation of pre-evaluation reports on safety and occupational hazards of metal and nonmetal mine construction projects
  • DB64/T 1175-2016 Regulations for the preparation of a special article on the design of safety and occupational disease protection facilities for metal and nonmetal mine construction projects
  • DB64/T 1178-2016 Regulations for preparation of acceptance evaluation report on safety and occupational disease protection facilities for metal and nonmetal mine construction projects

U.S. Military Regulations and Norms, purpose of metal

European Committee for Standardization (CEN), purpose of metal

  • EN 13523-22:2010 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
  • EN 13523-22:2003 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
  • prEN 2032-2-1985 Aerospace series; metallic materials; part 2: coding of material in delivery heat treatment conditions
  • EN 13523-22:2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
  • EN 348:1992 Protective Clothing - Determination of Behaviour of Materials on Impact of Small Splashes of Molten Metal
  • EN 1904:2000 Precious metals - The finenesses of solders used with precious metal jewellery alloys
  • EN ISO 17072-2:2022 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2022)
  • EN ISO 17072-2:2011 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011)
  • EN ISO 3927:2001 Metallic Powders, Excluding Powders for Hardmetals - Determination of Compressibility in Uniaxial Compression ISO 3927:2001; Supersedes EN 23927:1993
  • EN 29202:1992 Jewellery - Fineness of Precious Metal Alloys (ISO 9202 : 1991)
  • EN ISO 2740:1999 Sintered Metal Materials, Excluding Hardmetals - Tensile Test Pieces ISO 2740: 1999
  • EN ISO 2740:2009 Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009)
  • EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
  • EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phasesensitive eddy-current method
  • prEN 24491-2-1992 Metallic powders; determination of oxygen content by reduction methods; part 2: loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1989)
  • EN ISO 11306:1998 Corrosion of Metals and Alloys - Guidelines for Exposing and Evaluating Metals and Alloys in Surface Sea Water ISO 11306:1998

Professional Standard - Agriculture, purpose of metal

SAE - SAE International, purpose of metal

Professional Standard - Geology, purpose of metal

  • DZ/T 0101.9-1994 Geological instruments and meters manufacturing time quota non-ferrous metal casting

Military Standard of the People's Republic of China-General Armament Department, purpose of metal

American Welding Society (AWS), purpose of metal

BR-ABNT, purpose of metal

Danish Standards Foundation, purpose of metal

  • DS/ISO 2813:1984 Paints and varnishes. Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
  • DS/EN 60707:1999 Flammability of solid non-metallic materials when exposed to flame sources - List of test methods
  • DS/EN 1904:2001 Precious metals - The finenesses of solders used with precious metal jewellery alloys
  • DS/EN 62374-1/AC:2011 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
  • DS/EN 62374-1:2011 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers
  • DS/EN ISO 11306:1998 Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water
  • DS/ISO 23226:2020 Corrosion of metals and alloys – Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water
  • DS/ISO 2063:1986 Metallic coatings. Protection of iron and steel against corrosion. Metal spraying of zinc and aluminium
  • DS/EN 29202:2000 Jewellery - Fineness of precious metal alloys
  • DS/EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method

Group Standards of the People's Republic of China, purpose of metal

  • T/CITS 0002-2021 Detection of heavy mental cadmium in grain—Time-resolved fluorescent immunochromatographic method
  • T/CITS 0001-2021 Detection of heavy mental plumbum in grain—Time-resolved fluorescent immunochromatographic method
  • T/CSTM 01132-2023 Technical specification at the project level of greenhouse gas emission reduction –Recycled non-ferrous metals (aluminum, copper and lead)

CENELEC - European Committee for Electrotechnical Standardization, purpose of metal

  • EN 60707:1999 Flammability of Solid Non-Metallic Materials when Exposed to Flame Sources - List of Test Methods

Japanese Industrial Standards Committee (JISC), purpose of metal

SE-SIS, purpose of metal

Lithuanian Standards Office , purpose of metal

  • LST EN 1904-2003 Precious metals - The finenesses of solders used with precious metal jewellery alloys
  • LST EN ISO 27874:2009 Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008)

AENOR, purpose of metal

  • UNE-EN 1904:2001 Precious metals - The finenesses of solders used with precious metal jewellery alloys.
  • UNE-EN 60707:2000 FLAMMABILITY OF SOLID NON-METALLIC MATERIALS WHEN EXPOSED TO FLAME SOURCES - LIST OF TEST METHODS
  • UNE-EN ISO 27874:2010 Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008)

General Motors do Brasil, purpose of metal

  • GMSA EMS 9309502-2011 Metal-metal adhesive - high resistance-high tixotropy-low expansion Adesivo metal metal - alta resist锚ncia alta tixotropia - baixa expans茫o Do Not use on New Programs; No Replacement
  • GMSA LTP.CL.180-2011 Porcentagem de metais e aditivos em lubrificantes automotives Do Not use on New Programs; No Replacement

ES-UNE, purpose of metal

  • UNE-EN ISO 9202:2020 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019)
  • UNE-EN 13523-22:2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
  • UNE-EN ISO 21968:2020 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
  • UNE-EN ISO 8044:2020 Corrosion of metals and alloys - Vocabulary (ISO 8044:2020)
  • UNE-EN 62374-1:2010 Semiconductor devices -- Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers (Endorsed by AENOR in March of 2011.)
  • UNE-EN ISO 4491-2:2000 ERRATUM:2006 Metallic powders. Determination of oxygen content by reduction methods. Part 2: Loss of mass on hydrogen reduction (Hydrogen loss) (ISO 4491-2:1997)

Defense Logistics Agency, purpose of metal

US-RWMA, purpose of metal

  • RWMA BULL 19 Resistance Welding of Miscellaneous and Dissimilar Metals

AWS - American Welding Society, purpose of metal

IN-BIS, purpose of metal

American National Standards Institute （ANSI), purpose of metal

  • ANSI/EIA 377-1:1972 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application

ZA-SANS, purpose of metal

  • SANS 10120-2 DK:1996 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DK: Gabions and pitching
  • SANS 10275:2003 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
  • SANS 7799:2003 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test

International Telecommunication Union (ITU), purpose of metal

  • ITU-T D.195-2012 (Pre-Published) Time-scale for settlement of accounts for international telecommunication services
  • ITU-R RAPPORT BT.2044 FRENCH-2004 Tolerable round-trip time delay for sound-programme and television broadcast programme inserts – Context and rationale
  • ITU-R INFORME BT.2044 SPANISH-2004 Tolerable round-trip time delay for sound-programme and television broadcast programme inserts – Context and rationale
  • ITU-T D.195-2006 Time-scale for settlement of accounts for international telecommunication services Study Group 3

未注明发布机构, purpose of metal

  • BS EN 62374-1:2010(2011) Semiconductor devices Part 1 : Time - dependent dielectric breakdown (TDDB) test for inter - metal layers
  • BS ISO 27831-1:2008(2011) Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces Part 1 : Ferrous metals and alloys
  • BS ISO 27831-2:2008(2011) Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces Part 2 : Non - ferrous metals and alloys

IETF - Internet Engineering Task Force, purpose of metal

  • RFC 3296-2002 Named Subordinate References in Lightweight Directory Access Protocol (LDAP) Directories
  • RFC 3671-2003 Collective Attributes in the Lightweight Directory Access Protocol (LDAP)

ES-AENOR, purpose of metal

GM North America, purpose of metal

European Committee for Electrotechnical Standardization（CENELEC）, purpose of metal

  • HD 541 S1-1991 Methods of Test for the Determination of the Ignitability of Solid Electrical Insulating Materials When Exposed to Electrically Heated Wire Sources

GM Europe, purpose of metal

  • GME QE 061004-2000 An Tr鋑erblech vulkanisierte Elastomere f黵 Dichtungen Steuergeh鋟se in Kontakt mit Motor鰈 und K黨lwasser Elastomers Vulcanized to Metal Carrier for Gaskets of Timing Housing in Contact with Engine Oil and Cooling Water English/German
  • GME OPEL 297-2012 Determination of Average Thickness of Protective Wax Coatings on Metallic or Nonmetallic Materials (Revision 2; English/German; This standard may be applied only for current programs. It is inactive for all future projects and without replacement)

American Society of Mechanical Engineers (ASME), purpose of metal

  • ASME STP-PT-025-2009 Extended Fatigue Exemption Rules for Low CR Alloys into the Time-Dependent Range for Section VIII Division 2 Construction (STP-PT-025 - 2009)

International Electrotechnical Commission (IEC), purpose of metal

  • IEC 62374-1:2010 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers

NL-NEN, purpose of metal

  • NEN-ISO 3927:1993 Metallic powders, excluding powders for hardmetals. Determiantion of compactibility (compressibility) in uniaxial compression (ISO 3927:1985)

Professional Standard - Water Conservancy, purpose of metal

  • SL 647-2013 Technology parameter selection and technical requirements of vibration stress relief for hydro steel structure

National Health Commission of the People's Republic of China, purpose of metal

  • GBZ/T 308-2018 Simultaneous Determination of Multiple Metals in Urine by Inductively Coupled Plasma Mass Spectrometry

AT-ON, purpose of metal

  • ONORM M 9539-1984 Steel wire ropes for hauling and supporting purposes; round Strand ropes, parallel construction
  • ONORM M 9490 Teil.8-1987 Meteorological measurements for the purposes of air pollution control; measurement of duration of sunshine

GB-REG, purpose of metal

ECIA - Electronic Components Industry Association, purpose of metal

  • 377-1970 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application (ANSI C83.62-71)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, purpose of metal

  • ITU-T G.812-1998 Timing Requirements of Slave Clocks Suitable for Use as Node Clocks in Synchronization Networks - Series G: Transmission Systems and Media@ Digital Systems and Networks - Digital Transmission Systems - Digital Networks - Design Objectives for Digital Netw
  • ITU-T G.813 CORR 2-2016 Timing characteristics of SDH equipment slave clocks (SEC) Corrigendum 2 (Study Group 15)

CEN - European Committee for Standardization, purpose of metal

  • EN ISO 17072-2:2019 Leather - Chemical determination of metal content - Part 2: Total metal content
  • EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys
  • EN ISO 2740:2007 Sintered Metal Materials@ Excluding Hardmetals - Tensile Test Pieces

PT-IPQ, purpose of metal

KR-KS, purpose of metal

  • KS D ISO 11306-2019 Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water
  • KS C 0291-2002(2023) Environmental testing－Flammability of solid non－metallic materials when exposed to flame sources-list of test methods

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, purpose of metal

  • REPORT BT.2044-2004 Tolerable round-trip time delay for sound-programme and television broadcast programme inserts – Context and rationale
  • ITU-R BR.780-1992 Time and Control Code Standards for the International Exchange of Television Programmes on Magnetic Tapes
  • ITU-R BR.780-1-2002 Time and control code standards for the international exchange of television programmes on magnetic tapes**

ESDU - Engineering Sciences Data Unit, purpose of metal

CU-NC, purpose of metal

  • NC 12-04-39-1987 Standards System for Protection Against Corrosion. Acid Corrosion Inhibitors. Methods for the Détermination of Protecting Capacity during Metal Acid Pickling

National Electrical Manufacturers Association（NEMA), purpose of metal

  • NEMA FB 2.10-2012 Selection and Installation Guidelines Fittings for Use with Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing)

Military Standards (MIL-STD), purpose of metal

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, purpose of metal

  • GB/T 34626.2-2017 Metallic and other inorganic coatings—Cleaning and preparation of metal surfaces—Part 2: Non-ferrous metals and alloys

VE-FONDONORMA, purpose of metal

International Truck and Engine Corporation (ITEC), purpose of metal

National Aeronautics and Space Administration (NASA), purpose of metal

  Glass and heavy metals during the test, metal purpose, purpose of metal, heavy metal test, concentration of heavy metals, The purpose of the sample, Atomic Hours Alkali Metals.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved