ZH
RU
ES

Intensity of the infrared peak

Intensity of the infrared peak, Total:477 items.

In the international standard classification, Intensity of the infrared peak involves: Rubber, Construction materials, Plastics, Optoelectronics. Laser equipment, General methods of tests and analysis for food products, Testing of metals, Ferrous metals, Elements of buildings, Semiconducting materials, Thermodynamics and temperature measurements, Vocabularies, Wood, sawlogs and sawn timber, Beverages, Sports equipment and facilities, Wastes, Linear and angular measurements, Footwear, Medical equipment, Insulating fluids, Solar energy engineering, Equipment for the chemical industry, Optics and optical measurements, Paints and varnishes, Reinforced plastics, Non-metalliferous minerals, Valves, Non-destructive testing, Inorganic chemicals, Bridge construction, Burners. Boilers, Products of the textile industry, Cereals, pulses and derived products, Water quality, Materials for aerospace construction, Electrical accessories, Cans. Tins. Tubes, Radiation measurements, Analytical chemistry, Products of the chemical industry, Metrology and measurement in general, Domestic, commercial and industrial heating appliances, Powder metallurgy, Rubber and plastics products, Structure and structure elements, Tobacco, tobacco products and related equipment, Air quality, Pipeline components and pipelines, Protection against fire, Petroleum, petroleum products and natural gas handling equipment, Ferroalloys, Environmental testing, Protection of and in buildings, Leather technology, Electrical engineering in general, Materials for the reinforcement of composites, Adhesives, Nuclear energy engineering, Structures of buildings.

Canadian Standards Association (CSA), Intensity of the infrared peak

CSA 2.35B-2007-2007 Gas-Fired High-Intensity Infrared Heaters Addenda to the First Edition
CSA 2.35A-2002-2002 Gas-Fired High-Intensity Infrared Heaters Addenda to First Edition

AENOR, Intensity of the infrared peak

UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
UNE-EN 12771:2000 FOOTWEAR - TEST METHODS FOR OUTSOLES - TEAR STRENGTH
UNE-EN 14488-3:2007 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
UNE-EN 12773:2000 FOOTWEAR - TEST METHODS FOR OUTSOLES - NEEDLE TEAR STRENGTH
UNE-EN 12803:2001 FOOTWEAR - TEST METHODS FOR OUTSOLES - TENSILE STRENGTH AND ELONGATION.
UNE-EN 12774:2000 Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance.
UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
UNE-EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
UNE-EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Intensity of the infrared peak

GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 42905-2023 Infrared reflection method for measuring the thickness of silicon carbide epitaxial layer
GB/T 16488-1996 Water quality--Determination of petroleum oil, animal and vegetable oils--Infrared photometric method
GB/T 14847-1993 Test method for thickness of lightly doped silicon eqitaxial layers on heavily doped silicon substrates by infrared reflectance
GB/T 14847-2010 Test method for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance
GB/T 19199-2015 Test methods for carbon acceptor concentration in semi-insulating gallium arsenide single crystals by infrared absorption spectroscopy
GB/T 19199-2003 Test method for carbon concentration of semi-insulating monocrystal gallium arsenide by measurement infrared absorption method
GB/T 12152-1989 Analysis of water used in boiler and cooling system--Determination of mineral oil--Infrared photometric method
GB/T 20216-2016 Pulp and paper.Determination of the effective residual ink concentration (ERIC number).Infrared reflectance measurement
GB/T 28893-2012 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Methods used to determine peak intensities and information required when reporting results
GB/T 3654.6-2008 Ferroniobium. Determination of sulfur content. Combustion-iodate titrimetric method, methylene blue photometric method and infrared absorption method
GB 23101.4-2008 Implants for surgery.Hydroxyapatite.Part 4:Determination of coating adhesion strength
GB/T 18252-2000 Plastics piping and ducting systems--Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

British Standards Institution (BSI), Intensity of the infrared peak

BS EN 14488-3:2006 Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS ISO 6133:2015 Tracked Changes. Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS 4978:1996 Specification for visual strength grading of softwood
BS 4978:2007 Visual strength grading of softwood - Specification
BS 4978:2007+A1:2011 Visual strength grading of softwood. Specification
BS EN 12773:2000 Footwear - Test methods for outsoles - Needle tear strength
BS EN 16737:2016 Structural timber. Visual strength grading of tropical hardwood
BS EN 12516-1:2005 Industrial valves - Shell design strength - Tabulation method for steel valve shells
BS EN 12516-1:2014 Industrial valves. Shell design strength. Tabulation method for steel valve shells
BS EN 12516-1:2014+A1:2018 Industrial valves. Shell design strength. Tabulation method for steel valve shells
BS EN 12516-2:2004 Industrial vales - Shell design strength - Calculation method for steel valve shells
BS EN 12516-2:2014 Industrial valves. Shell design strength. Calculation method for steel valve shells
BS EN 12516-2:2014+A1:2021 Industrial valves. Shell design strength. Calculation method for steel valve shells
21/30433501 DC BS EN 14488-3. Testing sprayed concrete - Part 3. Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
BS EN 1875-3:2023 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of tear strength. Trapezoidal method (five-highest-peak calculation)
BS EN 12516-4:2008 Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
BS EN 12516-4:2014 Industrial valves. Shell design strength. Calculation method for valve shells manufactured in metallic materials other than steel
BS EN 12516-4:2014+A1:2018 Industrial valves. Shell design strength. Calculation method for valve shells manufactured in metallic materials other than steel
BS EN 12803:2000 Footwear - Test methods for outsoles - Tensile strength and elongation
BS EN 12803:2000(2004) Footwear - Test methods for outsoles - Tensile strength and elongation
BS ISO 13779-4:2002 Implants for surgery - Hydroxyapatite - Determination of coating adhesion strength
BS ISO 22947:2019 Cigarettes. Determination of carbon monoxide in the vapour phase of cigarette smoke with an intense smoking regime. NDIR method
BS ISO 14558:2000 Rubber - Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
BS ISO 14558:2016 Rubber. Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
BS EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: non-dispersive infrared spectrometry
BS 1881-5:1970 Testing concrete - Methods of testing hardened concrete for other than strength
BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
22/30450999 DC BS EN 14626. Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
16/30287218 DC BS ISO 19021. Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
BS EN 14255-4:2006 Measurement and assessment of personal exposures to incoherent optical radiation - Terminology and quantities used in UV-, visible and IR-exposure measurements
BS EN ISO 6781-1:2023 Performance of buildings. Detection of heat, air and moisture irregularities in buildings by infrared methods - General procedures
BS 146:2002 Specification for blastfurnace cements with strength properties outside the scope of BS EN 197-1
BS EN ISO 4628-5:2022 Tracked Changes. Paints and varnishes. Evaluation of quantity and size of defects, and of intensity of uniform changes inappearance. Assessment of degree of flaking
BS ISO 20368:2017 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
BS ISO 20903:2019 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
16/30332259 DC BS EN ISO 20875. Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance
PD CEN/TS 927-9:2023 Tracked Changes. Paints and varnishes. Coating materials and coating systems for exterior wood. Determination of pull-off strength
BS EN ISO 4628-2:2016 Tracked Changes. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering
BS EN ISO 4628-4:2016 Tracked Changes. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of cracking
BS EN ISO 4628-3:2016 Tracked Changes. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of rusting
BS EN 15058:2017 Tracked Changes. Stationary source emissions. Determination of the mass concentration of carbon monoxide. Standard reference method: non-dispersive infrared spectrometry

SE-SIS, Intensity of the infrared peak

SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
SIS SS 02 81 03-1991 Determination of fat in wastewater from food processing industries — Infrared spectrophotometric method

Association Francaise de Normalisation, Intensity of the infrared peak

NF T46-055:2005 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength.
NF T46-055*NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
NF ISO 6133:2015 Caoutchouc et plastiques - Analyse des tracés multi-pics obtenus lors des déterminations de la résistance au déchirement et de la force d'adhérence
NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.
NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
NF G62-309*NF EN 12771:2000 Footwear - Test methods for outsoles - Tear strength
NF B52-002*NF EN 16737:2016 Structural timber - Visual strength grading of tropical hardwoods
NF G62-305*NF EN 12773:2000 Footwear -Test methods for outsoles - Needle tear strength
NF T13-001:1967 Rhombic mica. Dimensions. Appearance characteristics high temperature strength.
NF A09-400:1991 Non destructive testing. Infrared thermography. Vocabulary concerning the designation of the equipment.
XP ISO/TS 19021:2019 Méthode pour déterminer les concentrations des gaz émis lors de l'essai ISO 5659-2 par spectroscopie infrarouge à transformée de Fourier
NF V03-768:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels.
NF V03-768:2015 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
NF V03-768*NF EN 15948:2020 Cereals - Determination of moisture and protein - Method using Near-Infrared Spectroscopy in whole kernels
NF E29-300-1:2005 Industrial valves - Shell design strength - Part 1 : tabulation method for steel valve shells.
NF E29-300-1:2014 Industrial valves - Shell design strength - Part 1 : tabulation method for steel valve shells
NF E29-300-2:2014 Industrial valves - Shell design strength - Part 2 : calculation method for steel valve shells
NF S97-150-5:2003 Clinical thermometers - Part 5 : performance of infra-red ear thermometers (with maximum device).
NF T43-024*NF ISO 14558:2016 Rubber - Determination of residual unsaturation of hydrogenated nitrile butasiene rubber (HNBR) by infrared spectroscopy
NF ISO 14558:2016 Caoutchouc - Détermination de la non-saturation résiduelle du caoutchouc nitrile butadiène hydrogéné (HNBR) par spectroscopie à infrarouge
NF EN 14488-3:2006 Essais pour béton projeté - Partie 3 : résistances à la flexion (au premier pic, ultime et résiduelle) d'éprouvettes parallélépipèdiques en béton renforcé par des fibres
NF G62-308*NF EN 12803:2000 Footwear - Test methods for outsoles - Tensile strength and elongation
NF A95-323:1984 POWDER METALLURGY. DETERMINATION OF THE TRANSVERSE RUPTURE STRENGTH (EXCLUDING HARDMETALS).
NF A95-323*NF EN ISO 3325:1999 Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength.
NF EN 1875-3:2023 Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la résistance au déchirement - Partie 3 : méthode sur éprouvettes trapézoïdales (calcul des cinq pics les plus hauts)
NF X10-023*NF EN 13187:1999 Thermal performance of buildings. Qualitative detection of thermal irregularities in building envelopes. Infrared method.
NF H34-067:2008 Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering.
NF G62-301*NF EN 12774:2000 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
XP CEN/TS 17405:2020 Emissions de sources fixes - Détermination de la concentration volumique en dioxyde de carbone - Méthode de référence : spectrométrie infrarouge
XP P92-021*XP ISO/TS 19021:2019 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
NF EN 12516-4/IN1:2018 Robinetterie industrielle - Résistance mécanique des enveloppes - Partie 4 : méthode de calcul relative aux enveloppes d'appareils de robinetterie en matériaux métalliques autres que l'acier
NF EN 12516-4+A1:2018 Robinetterie industrielle - Résistance mécanique des enveloppes - Partie 4 : méthode de calcul relative aux enveloppes d'appareils de robinetterie en matériaux métalliques autres que l'acier
NF EN ISO 3325:1999 Matériaux métalliques frittés à l'exclusion des métaux-durs - Détermination de la résistance à la rupture transversale
NF X43-065*NF EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif
NF E29-300-4:2008 Industrial valves - Shell design strength - Part 4 : calculation method for valve shells manufactures in metallic materials other than steel.
NF E29-300-4:2014 Industrial valves - Shell design strength - Part 4 : calculation method for valve shells manufactured in metallic materials other than steel
NF S94-062-4*NF ISO 13779-4:2019 Implants for surgery - Hydroxyapatite - Part 4 : determination of coating adhesion strength
NF ISO 13779-4:2019 Implants chirurgicaux - Hydroxyapatite - Partie 4 : détermination de la résistance à l'adhésion du revêtement
NF X43-311*NF EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method : non-dispersive infrared method.
NF EN IEC 63180:2020 Méthodes de mesure et qualification de la plage de détection des détecteurs - Détecteurs infrarouges passifs pour la détection de mouvements de forte et de faible amplitude
NF X21-058:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results.
NF X43-374*NF EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method : non-dispersive infrared spectrometry
NF EN ISO 21258:2010 Émissions de sources fixes - Détermination de la concentration massique de protoxyde d'azote (N2O) - Méthode de référence : méthode infrarouge non dispersive
NF EN 15058:2017 Émissions de sources fixes - Détermination de la concentration massique de monoxyde de carbone - Méthode de référence normalisée : spectrométrie infrarouge non dispersive
NF EN ISO 4628-5:2022 Peintures et vernis - Evaluation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 5 : Evaluation du degré d'écaillage
NF T30-140-3*NF EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3 : assessment of degree of rusting
NF T30-140-4*NF EN ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4 : assessment of degree of cracking
NF T30-140-2*NF EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2 : assessment of degree of blistering
NF T30-140-5*NF EN ISO 4628-5:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5 : assessment of degree of flaking
NF EN ISO 4628-3:2016 Peintures et vernis - Évaluation de la dégradation des revêtements - Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 3 : évaluation du degré d'enrouillement
NF EN ISO 4628-2:2016 Peintures et vernis - Évaluation de la dégradation des revêtements - Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 2 : évaluation du degré de cloquage
NF EN ISO 4628-4:2016 Peintures et vernis - Évaluation de la dégradation des revêtements - Désignation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 4 : évaluation du degré de craquelage

International Organization for Standardization (ISO), Intensity of the infrared peak

ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 9585:1990 Implants for surgery; determination of bending strength and stiffness of bone plates
ISO 22654:2002 Footwear - Test methods for outsoles - Tensile strength and elongation
ISO 14317:2006 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
ISO 14317:2015 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
ISO 1920-5:2004 Testing of concrete - Part 5: Properties of hardened concrete other than strength
ISO 20875:2001 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
ISO 20875:2018 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
ISO 13779-4:2002 Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength
ISO 20903:2019 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Methods used to determine peak intensities and information required when reporting results
ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method
ISO 20368:2017 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
ISO 20903:2011 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
ISO 6781-1:2023 Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 1: General procedures
ISO 4628-5:2022 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
ISO/DIS 4628-3:2023 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
ISO/CD 4628-3:1980 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
ISO/FDIS 4628-10:2023 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
ISO/DIS 4628-10:1980 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion

German Institute for Standardization, Intensity of the infrared peak

DIN ISO 6133:2004 Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
DIN ISO 6133:2017 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:2015)
DIN EN 14488-3:2021-05 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German and English version prEN 14488-3:2021 / Note: Date of issue 2021-04-09*Intended as replacement for DIN EN 14488-3 (2006...
DIN EN 14488-3:2006-09 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German version EN 14488-3:2006 / Note: To be replaced by DIN EN 14488-3 (2021-05).
DIN 50437:1979 Testing of semi-conductive inorganic materials; measuring the thickness of silicon epitaxial layer thickness by infrared interference method
DIN 65565:1992-10 Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy
DIN EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens English version of DIN EN 14488-3:2006-09
DIN EN 1875-3:2023-04 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation); German version EN 1875-3:2023
DIN EN 1875-3:2023 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation)
DIN EN 2377:1989 Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989
DIN 55436-6:1985 Packaging test; tubes made of aluminium; disposition of the adhesive strength of the inside and outside protective lacquer
DIN EN 12516-2:2004 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells; German version EN 12516-2:2004
DIN EN 1912:2007 Structural timber - Strength classes - Assignment of visual grades and species; German version EN 1912:2004+A1:2007
DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
DIN CEN/TS 17405:2020-11 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
DIN 28159 Bb.1:2006 Shaft end for externally coupled glass lined steel agitators - Dimensions - Supplement 1: Information concerning strength
DIN EN 15421:2008 Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering; English version of DIN EN 15421:2008-02
DIN CEN/TS 17337:2019-08*DIN SPEC 33981:2019-08 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy; German version CEN/TS 17337:2019
DIN EN 16737:2016 Structural timber - Visual strength grading of tropical hardwood; German version EN 16737:2016
DIN EN 12774:2000-04 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance; German version EN 12774:1999 / Note: To be replaced by DIN EN ISO 20875 (2016-01).
DIN EN 15058:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry English version of DIN EN 15058:2006-09
DIN 28159 Beiblatt 1:2006-12 Shaft end for externally coupled glass lined steel agitators - Dimensions - Supplement 1: Information concerning strength
DIN EN 12516-4:2018 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel (includes Amendment A1:2018)
DIN EN 12516-4:2008 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel; English version of DIN EN 12516-4:2008-05
DIN EN 12516-2:2015-01 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells; German version EN 12516-2:2014
DIN EN 15948:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels; German version EN 15948:2012
DIN EN 15948:2015 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels; German version EN 15948:2015
DIN EN 15058:2017-05 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017
DIN EN 12516-2:2022 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells (includes Amendment A1:2021)
DIN CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
DIN 65565:1992 Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy
DIN EN ISO 4628-5:2023 Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2022)
DIN EN ISO 21258:2010-11 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N<(Index)2>O) - Reference method: Non-dispersive infrared method (ISO 21258:2010); German version EN ISO 21258:2010
DIN EN ISO 4628-10:2022-09 Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO/DIS 4628-10:2022); German and English version prEN ISO 4628-10:2022 / Note: ...
DIN EN ISO 4628-2:2016-07 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016); German version EN ISO 4628-2:2016
DIN EN ISO 4628-4:2016-07 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016); German version EN ISO 4628-4:2016
DIN EN 14626:2012 Ambient air.Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012
DIN EN ISO 4628-3:2016-07 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016

Professional Standard - Electron, Intensity of the infrared peak

SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
SJ 2658.9-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for the intensity space distribution and half-intensity angle of radiation
SJ 2758-1987 Method of measurement by infrared interference for thickness of homoepitaxial layers
SJ 3247-1989 Methods of measurement for extended-layer thickness of same-type Gallium arsenide by infra-red interference
SJ 3249.3-1989 Methods of measurement for chromium concentration in semi-insulation Gallium arsenide by infra-red absorption
SJ 2757-1987 Method of measurement by infra-red reflection for charge carrier concentraiton of heavily doped semiconductors
SJ 3249.2-1989 Methods of measurement for Carbon concentration of semi-insulation Gallicem arsenide single crystal by infra-red absorption
SJ 3248-1989 Methods for measuring carrier concentration of readded Gallium arsenide and Indium phosphide by infra-red reflection
SJ 2658.13-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for output optical power temperature coefficient

YU-JUS, Intensity of the infrared peak

JUS G.S2.152-1985 Rubber and plastics. Analysis of multi-peak traces obtained in determination of tear strength and adhesion strength
JUS H.F8.153-1986 Gases. Determination of carbon dioxid content. Infrared spectrophotometric method
JUS G.S1.510-1997 Plastics - Analysis of components in polyvinyl chloride) compounds - Infrared spectrofotometric method
JUS G.C1.303-1996 Plastics - Determination vinylidene unsaturation in polyethylene - Infrared spectrophotometric method

Danish Standards Foundation, Intensity of the infrared peak

DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
DS/R 209:1980 Determination of oil and grease in water. Infrared spectrophotometric method
DS/EN 12771:2000 Footwear - Test methods for outsoles - Tear strength
DS/EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
DS/EN 12773:2000 Footwear - Test methods for outsoles - Needle tear strength
DS/R 209:2006 Determination of oil and grease in water - Extraction with tetrachloroethylene and measurement by infrared spectrophotometry
DS/EN 12803/AC:2002 Footwear - Test methods for outsoles - Tensile strength and elongation
DS/EN 12803:2000 Footwear - Test methods for outsoles - Tensile strength and elongation
DS/EN 12774:2000 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
DS/EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method
DS/EN 15058:2006 Stationary source emissions – Determination of the mass concentration of carbon monoxide (CO) – Reference method: Non-dispersive infrared spectrometry
DS/EN ISO 4628-3:2004 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
DS/EN ISO 4628-4:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
DS/EN 1993-1-6 DK NA:2013 National Annex to Eurocode 3: Design of steel structures - Part 1-6: Strength and stability of shell structures
DS/EN 1993-1-6 DK NA:2020 National Annex to Eurocode 3: Design of steel structures – Part 1-6: Strength and stability of shell structures
DS/EN ISO 4628-2:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
DS/EN ISO 4628-5:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking

Japanese Industrial Standards Committee (JISC), Intensity of the infrared peak

JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS G 1211-4:2011 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating
JIS G 1211-4 AMD 1:2013 Iron and steel.Determination of carbon content.Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 1)
JIS G 1211-4 AMD 2:2017 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 2)
JIS K 7057:1995 Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics
JIS R 1802:2005 Methods for surface temperature measurement of far infrared heaters by thermocouples

American National Standards Institute （ANSI), Intensity of the infrared peak

ANSI/UL 2333-2003 Standard for Safety for Infrared Thermometers
ANSI/ASTM D6248:1998 Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ANSI/EIA 364-98:1997 Housing Locking Mechanism Strength Test Procedure for Electrical Connectors
ANSI Z83.19-2009 American National Standard/CSA Standard for Gas-Fired High-Intensity Infrared Heaters (same as CSA 2.35 with Addenda a & b)
ANSI Z83.19a-2010 American National Standard/CSA Standard for Gas-Fired High Intensity Infrared Heaters, same as CSA 2.35a

NZ-SNZ, Intensity of the infrared peak

AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength
NZS 3112.3:1986 Methods of Test for Concrete Other Than Strength (Incorporating Amendment No. 1: May 1986)
AS/NZS 4547.5:2004 Methods of testing wool packs for greasy wool Method 5: Strength of fabric after exposure to ultraviolet radiation
NZS 3112.3:1986 Methods of Test for Concrete Other Than Strength (Incorporating Amendment No. 1: May 1986)

ES-UNE, Intensity of the infrared peak

UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength
UNE-EN 1875-3:2023 Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation)
UNE-EN ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
UNE-EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
UNE-EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)

Underwriters Laboratories (UL), Intensity of the infrared peak

UL 2333 BULLETIN-2002 UL Standard for Safety Infrared Thermometers
UL 2333-2016 UL Standard for Safety Infrared Thermometers (Third Edition)
UL 2333 BULLETIN-2019 UL Standard for Safety Infrared Thermometers (COMMENTS DUE: JULY 1@ 2019)
UL 2333 BULLETIN-2008 UL Standard for Safety Infrared Thermometers (COMMENTS DUE: March 17@ 2008)
UL 2333 BULLETIN-2012 UL Standard for Safety Infrared Thermometers (COMMENTS DUE: JULY 30@ 2012)

National Metrological Technical Specifications of the People's Republic of China, Intensity of the infrared peak

JJF 1107-2003 Calibration Specification for Infrared Thermometers for Measurement of Human Temperature

ZA-SANS, Intensity of the infrared peak

SANS 16133:2003 Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
SANS 5636:1972 Determination of (a) tensile strength, (b) percentage elongation caused by a specified force, (c) percentage elongation at break of leather

Korean Agency for Technology and Standards (KATS), Intensity of the infrared peak

KS D ISO 15349-1-2005(2015) Unalloyed steel－Determination of low carbon content－Part 1：Infrared absorption method after combustion in an electric resistance furnace(by peak separation)
KS P ISO 9585:2010 Implants for surgery－Determination of bending strength and stiffness of bone plates
KS P ISO 9585-2010(2016) Implants for surgery－Determination of bending strength and stiffness of bone plates
KS P ISO 9585:2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
KS M ISO 20874:2012 Footwear－Test methods for outsoles－Needle tear strength
KS M 5506-2011(2021) Testing method for infrared reflectance (from spectrophotometric date)
KS M ISO 22654:2008 Footwear－Test methods for outsoles－Tensile strength and elongation
KS M ISO 14558-2017(2022) Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber(HNBR) by infrared spectroscopy
KS D ISO 14317:2012 Sintered metal materials excluding hardmetals-Determination of compressive yield strength
KS I ISO 21258-2012(2017) Stationary source emissions－Determination of the mass concentration of dinitrogen monoxide(N2O)－Reference method：Non-dispersive infrared method
KS P ISO 13779-4:2009 Implants for surgery-Hydroxyapatite-Part 4:Determination of coating adhesion strength
KS I ISO 21258:2022 Stationary source emissions — Determination of the mass concentration of dinitrogen monoxide(N2O) — Reference method: Non-dispersive infrared method
KS M ISO 4628-4:2018 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
KS M ISO 4628-5-2017(2022) Paints and varnishes－Evaluation of degradation of coatings－ Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 5：Assessment of degree of flaking
KS M ISO 4628-2:2021 Paints and varnishes — Evaluation of degradation of coatings —Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blisterin

Indonesia Standards, Intensity of the infrared peak

SNI 03-4166-1996 Test method for shear strength of red brick walls in laboratory
SNI ISO 20872:2011 Footwear - Test methods for outsoles - Tear strength

Group Standards of the People's Republic of China, Intensity of the infrared peak

T/SATA 054-2023 Etermination of ethanol concentration in wine - Near infrared spectroscopy method
T/IAWBS 007-2018 Test method for thickness of 4H silicon carbide homo-epitaxial layers by infrared reflectance
T/NAIA 0152-2022 Determination of alcohol content and total extracts in wine by near-infrared-density method
T/CTES 1039-2021 Textiles-Test method for assessing the smoothness appearance of fabrics after laundering and drying-Infrared image analysis method
T/CQEEMA 3-2021 Stationary sources emission —Determination of hydrogen chloride—Fourier transform infrared spectrophotometry

GM North America, Intensity of the infrared peak

GM GM9035P-1988 Quality Control of Lubricants (Infrared Spectrophotometric)

American Society for Testing and Materials (ASTM), Intensity of the infrared peak

ASTM E2758-22 Standard Guide for Selection and Use of Infrared Thermometers
ASTM E2758-15a Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
ASTM F3105-20 Standard Specification for Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
ASTM E2847-21 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E1965-98 Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E1965-98(2003) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E1965-98(2009) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E1965-98(2023) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E1965-98(2016) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM D3677-10 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM E81-96(2001) Standard Test Method for Preparing Quantitative Pole Figures
ASTM E816-95 Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM E816-95(2002) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM D6122-99 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D6122-01 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D6122-09 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM E2847-13 Standard Practice for ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E2847-11 Standard Practice for 65279; 65279;Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM F2392-04(2010) Standard Test Method for Burst Strength of Surgical Sealants
ASTM F2392-04(2015) Standard Test Method for Burst Strength of Surgical Sealants
ASTM D3677-00(2004) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM D3677-00 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM D3677-10(2019) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM D6122-06 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D6122-06e1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D4788-03(2007) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM D4788-88(1997) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM F2392-04 Standard Test Method for Burst Strength of Surgical Sealants
ASTM F3104-21 Standard Test Methods for Evaluating Design and Performance Characteristics of Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
ASTM G183-15(2023) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D3259-95 Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle
ASTM E1786-96 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E1786-02 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM D4788-03 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM D3259-95(2001)e1 Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle
ASTM E1934-99a(2010) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
ASTM D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM E1862-14(2018) Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM E1862-97e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM E1862-97(2002)e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM E1862-14(2022) Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM F428-19 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
ASTM G183-05(2010) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM E1862-97(2010) Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM E1862-14 Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
ASTM D6248-21 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D5670-95(2019) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D5902-05(2015) Standard Test Method for Rubber&x2014;Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM D7172-14 Standard Test Method for Determining the Relative Density 40;Specific Gravity41; and Absorption of Fine Aggregates Using Infrared
ASTM F428-83(1997)e1 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-03 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-83(1997)e2 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-01 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D5670-95(2023) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D7172-06 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM D5670-95(2004)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
ASTM D5670-95(2000)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM D6122-10 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-13 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-15 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D5670-95(2014) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D3133-96 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
ASTM D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D5670-95(2009) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
ASTM D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM E2098/E2098M-13(2018) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide S
ASTM G183-15 Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D6248-98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
ASTM D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
ASTM D6348-03(2010) Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6348-12e1 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared 40;FTIR41; Spectroscopy
ASTM D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints

Professional Standard - Environmental Protection, Intensity of the infrared peak

HJ 1051-2019 Soil Petroleum Determination Infrared Spectrophotometry
HJ 637-2012 Water quality.Determination of petroleum oils and animal and vegetable oils.Infrared spectrophotometry
HJ 637-2018 Water Quality Determination of Petroleum and Animal and Vegetable Oils Infrared Spectrophotometry
HJ 1077-2019 Infrared Spectrophotometric Method for Determination of Oil Fume and Oil Mist in Exhaust Gases from Stationary Pollution Sources

NO-SN, Intensity of the infrared peak

NS 9803-1993 Water analysis. Determination of oil in water. Infrared spectrophotometric method
NS 9804-1993 Water analysis. Determination of fat in wastewater from food processing industries. Infrared spectrophotometric method

Xinjiang Provincial Standard of the People's Republic of China, Intensity of the infrared peak

DB65/T 4372-2021 Determination of Petroleum in Solid Waste Infrared Spectrophotometry

TR-TSE, Intensity of the infrared peak

TS 3286-1979 Flexuial Strength Of Concrete Under Field Conditions

Lithuanian Standards Office , Intensity of the infrared peak

LST EN 12771-2002 Footwear - Test methods for outsoles - Tear strength
LST EN 14488-3-2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
LST EN 12773-2001 Footwear - Test methods for outsoles - Needle tear strength
LST EN 12803-2001 Footwear - Test methods for outsoles - Tensile strength and elongation
LST EN 12470-5-2004 Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device)
LST EN 12774-2002 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
LST CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
LST EN 12516-1-2015 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
LST EN 15058-2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry
LST EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Intensity of the infrared peak

ASHRAE OR-05-4-1-2005 Laboratory Infrared Thermography Technique for Window Surface Temerature Measurements

TH-TISI, Intensity of the infrared peak

TIS 1683-1998 Implants for surgery.determination of bending strength and stiffness of bone plates

Taiwan Provincial Standard of the People's Republic of China, Intensity of the infrared peak

CNS 13382-19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
CNS 13382.19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates

RU-GOST R, Intensity of the infrared peak

GOST ISO 9585-2011 Implants for surgery. Determination of bending strength and stiffness of bone plates
GOST R 55597-2013 High pressure vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openinys in shells and heads external pressure. Strength calculation under external static loads on the nozzle
GOST ISO 20872-2011 Footwear. Test methods for outsoles. Tear strength
GOST 28326.3-1989 Technical liquid ammonia. Determination of oil mass concentration by method of infra-red spectrometry
GOST R 8.657-2009 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST 8.229-2013 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST 8.229-1981 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Methods and means of verification
GOST R 57067-2016 Polymer composites system for external reinforcement. Test method for determining interlayer shear strength
GOST R 54866-2011 Thermoplastics pipes. Determination of the long-term hydrostatic strength on pipe samples by extrapolation method
GOST 18228-1994 Sintered metal materials excluding hard metals. Determination of transverse rupture strength
GOST 18228-1985 Powder metallurgy. Determination of bending strength limit
GOST R 52857.3-2007 Vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads under internal and external pressure. Strength calculation of shells and heads under external static loads on the nozzle
GOST R 57048-2016 Polymer composites system for external reinforcement. Test method for determining pull-off strength from concrete substrate
GOST R 56332-2014 Implants for surgery. Hydroxyapatite. Part 4. Determination of coating adhesion strength
GOST R ISO 13779-4-2013 Implants for surgery. Hydroxyapatite. Part 4. Determination of coating adhesion strength
GOST 28212-1989 Basic environmental testing procedures. Part 2. Tests. Test U: Robustens of terminations and integral mounting devices
GOST 10390-1986 Electrical equipment for voltages 3 kV and higher. Test methods of electric strength of external insulation in conditions of contamination

KR-KS, Intensity of the infrared peak

KS P ISO 9585-2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
KS M ISO 14558-2017 Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber(HNBR) by infrared spectroscopy
KS I ISO 21258-2022 Stationary source emissions — Determination of the mass concentration of dinitrogen monoxide(N2O) — Reference method: Non-dispersive infrared method
KS M ISO 4628-5-2017 Paints and varnishes－Evaluation of degradation of coatings－ Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 5：Assessment of degree of flaking
KS M ISO 4628-2-2016 Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 2：Assessment of degree of blistering
KS M ISO 4628-4-2018 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
KS M ISO 4628-2-2021 Paints and varnishes — Evaluation of degradation of coatings —Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blisterin
KS M ISO 4628-10-2016 Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of uniform changes in appearance－Part 10：Assessment of degree of filiform corro
KS M ISO 4628-4-2018(2023) Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
KS M ISO 4628-3-2018(2023) Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting

European Committee for Standardization (CEN), Intensity of the infrared peak

prEN 14488-3-2021 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN 12470-5:2003 Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device)
EN 12516-2:2004 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
EN 15948:2012 Cereals - Determination of moisture and protein - Method using Near-Infrared-Spectroscopy in whole kernels
EN 12516-1:2005 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
prEN 26781-1992 Thermal insulation; qualitative detection of thermal irregularities in building envelopes; infrared method (ISO 6781:1983)
CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
EN 15058:2006 Stationary source emissions Determination of the mass concentration of carbon monoxide (CO) Reference method: Non-dispersive infrared spectrometry
EN 12516-2:2014+A1:2021 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
CEN/TS 17337:2019 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy
EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010)
EN 12516-4:2008 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects@ and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
prEN ISO 4628-3 rev Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
CEN EN 12516-4-2008 Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
CEN/TS 927-9:2023 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 9: Determination of pull-off strength
EN 514:2000 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T joints
EN 514:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the strength of welded corners and T-joints

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Intensity of the infrared peak

ASHRAE AC-02-2-3-2002 Surface Temperatures of Window Specimens: Infrared Thermography Laboratory Measurements
ASHRAE SA-96-6-1-1996 Surface Temperatures of Insulated Glazing Units: Infrared Thermography Laboratory Measurements
ASHRAE SA-96-6-2-1996 Surface Temperature Measurement of Insulating Glass Units Using Infrared Thermography

Professional Standard - Medicine, Intensity of the infrared peak

YY/T 0342-2002 Implants for surgery----Determination of bending strength and stiffness of bone plates

国家药监局, Intensity of the infrared peak

YY/T 0342-2020 Implants for surgery----Determination of bending strength and stiffness of bone plates

(U.S.) Ford Automotive Standards, Intensity of the infrared peak

FORD FLTM BP 008-3-2001 STRENGTH OF ADHESION BETWEEN TUBE AND COVER OF OPEN WEAVE REINFORCED RUBBER HOSE
FORD FLTM BO 015-03-2000 RESISTANCE OF WOODGRAIN FILMS TO HIGH INTENSITY ULTRAVIOLET EXPOSURE
FORD WSB-M4G276-B2-1993 SEALER, VINYL, PAINTABLE, CHIP RESISTANT, 0.25 MM MINIMUM FILM THICKNESS, INFRARED PREGEL TYPE

PL-PKN, Intensity of the infrared peak

PN C04194-1992 Petroleum products Determination of the benzene content in gasoline by infrared spectrophotometric method
PN Z04108-04-1988 Air purity protection Tests for oils Determination of li?uid phase of oil in work places by infrared absorption spectrophotometry
PN Z04018-02-1991 Air purity protection Tests for free crystalline silica content Determination of free crystalline silica in total dust in work places by infrared absorption spectrophotometry
PN Z04018-03-1991 Air purity protection Tests for free crystalline silica content Determination of free crystalline silicain respirable dust in work places by infrared absorption spectrophotomery

未注明发布机构, Intensity of the infrared peak

DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
BS 1881-5:1970(1999) Methods of Testing concrete — Part 5 : Methods of testing hardened concrete for other than strength

Professional Standard - Petrochemical Industry, Intensity of the infrared peak

SH/T 1762-2008 Rubber.Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy

GOSTR, Intensity of the infrared peak

GOST 34233.3-2017 Vessels and apparatus.Norms and methods of strength calculation. Reinforcement of openings in shells and bottoms under internal and external pressure. Strength calculation of shells and bottoms under external static loads on the nozzle

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Intensity of the infrared peak

IPC TM-650 2.4.21.1-1991 Bond Strength, Surface Mount Lands Perpendicular Pull Method Revision C

American Society of Mechanical Engineers (ASME), Intensity of the infrared peak

ASME STP-PT-082-2017 Stress Intensity K Factors for External Surface Cracks in Thick-Walled Cylinder Vessels

IT-UNI, Intensity of the infrared peak

UNI CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry

BELST, Intensity of the infrared peak

STB 8058-2017 System for ensuring uniformity of measurements of the Republic of Belarus. Ultraviolet-visible-nearinfrared spectrophotometers. Methods of verification

CEN - European Committee for Standardization, Intensity of the infrared peak

PD CEN/TS 17337:2019 Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy

NL-NEN, Intensity of the infrared peak

NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry

Association of German Mechanical Engineers, Intensity of the infrared peak

VDI 3861 Blatt 1-1989 Measurement of fibrous particles; manual measurement of asbestos in flowing clean exhaust gas; determination of asbestos mass concentration by IR-spectroscopy

U.S. Military Regulations and Norms, Intensity of the infrared peak

ARMY MIL-F-20420 J (4)-1993 FLARE, SURFACE, TRIP M49A1, PARTS, AND LOADING, ASSEMBLING AND PACKING
ARMY MIL-F-20420 J VALID NOTICE 1-1988 FLARE, SURFACE, TRIP M49A1, PARTS, AND LOADING, ASSEMBLING AND PACKING
ARMY MIL-F-20420 J-1983 FLARE, SURFACE, TRIP M49A1, PARTS, AND LOADING, ASSEMBLING AND PACKING

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Intensity of the infrared peak

GB/T 23101.4-2008 Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength

AT-ON, Intensity of the infrared peak

ONR CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry (CEN/TS 17405:2020)

IN-BIS, Intensity of the infrared peak

IS 9910-1981

ESDU - Engineering Sciences Data Unit, Intensity of the infrared peak

ESDU 84037-1984 Fatigue strength of external and internal steel screw threads under axial loading. (Standard forms not greater than 1.0 inch diameter.)

Illuminating Engineering Society of North America, Intensity of the infrared peak

IESNA LM-61-2006 Identifying Operating Factors Influencing Measured Vs. Predicted Performance for Installed Outdoor High Intensity Discharge (HID) Luminaires

Standard Association of Australia （SAA）, Intensity of the infrared peak

AS/NZS 1301.560:2016 Methods of test for pulp and paper, Method 560: Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
AS/NZS 3813:2016 Plastic monobloc chairs — Determination of strength and durability, stability, UV and weathering, and ignitability