ZH

RU

ES

ion mass spectrometry

ion mass spectrometry, Total:499 items.

In the international standard classification, ion mass spectrometry involves: Environmental protection, Linear and angular measurements, Analytical chemistry, Water quality, Inorganic chemicals, Medical equipment, Non-metalliferous minerals, Testing of metals, General methods of tests and analysis for food products, Vocabularies, Tobacco, tobacco products and related equipment, Education, Protection against crime, Optics and optical measurements, Welding, brazing and soldering, Non-ferrous metals, Tea. Coffee. Cocoa, Beverages, Pumps, Semiconducting materials, Raw materials for rubber and plastics, Soil quality. Pedology, Fuels, Products of the chemical industry, Ferroalloys, Ceramics, Medical sciences and health care facilities in general, Laboratory medicine, Products of non-ferrous metals, Road vehicle systems, Electronic components in general, Wastes, Air quality, Animal feeding stuffs, Farming and forestry, Microbiology, Metalliferous minerals, Semiconductor devices, Nuclear energy engineering, Ferrous metals, Coals, Fertilizers, Electrical engineering in general, Textile fibres, Products of the textile industry, Protection of and in buildings, Occupational safety. Industrial hygiene, Switchgear and controlgear, Natural gas, Meat, meat products and other animal produce, Fruits. Vegetables.


Professional Standard - Environmental Protection, ion mass spectrometry

  • HJ/T 84-2001 Water quality.Determination of inorganic anions.Ion chromatography method
  • HJ 669-2013 Water quality.Determination of phosphate.Ion chromatography
  • HJ 778-2015 Water quality-Determination of iodide-Ion chromatography
  • HJ 812-2016 Water Quality-Determination of Water Soluble Cations(Li+ 、Na+、NH4+、K+、Ca2+、Mg2+)-Ion Chromatography
  • HJ 84-2016 Water Quality-Determination of Inorganic Anions(F-、Cl-、NO2-、Br-、NO3-、PO43-、SO32-、SO42-)-Ion Chromatography
  • HJ 700-2014 Water quality.Determination of 65 elements.Inductively coupled plasma-mass spectrometry
  • HJ/T 83-2001 Water quality-Determination of adsorbable organic halogen-Ion chromatography method
  • HJ 509-2009 Determination of Platinum,Palladium and Rhodium loading in the vehicle-used ceramic catalytic converters.Inductive coupled plasma-optical emission spectrometry and inductive coupled plasma-mass spectrometry
  • HJ 1074-2019 Water Quality Determination of 4 Organotin Compounds including Tributyltin by Liquid Chromatography-Inductively Coupled Plasma Mass Spectrometry
  • HJ 766-2015 Solid Waste–Determination of metals–Inductively coupled plasma mass spectrometry (ICP-MS)
  • HJ 776-2015 Water quality – Determination of 32 elements-Inductively coupled plasma optical emission spectrometry

Group Standards of the People's Republic of China, ion mass spectrometry

  • T/CIS 17004-2020 Ambient ionization device
  • T/ZPP 017-2023 Mass Cytometry Analyzer
  • T/NAIA 0169-2022 Water Quality Determination of Ammonia Nitrogen by Ion Chromatography
  • T/CIMA 0023-2020 Technical requirements for vehicle-mounted inductively coupled plasma quadrupole mass spectrometer
  • T/DLAS 004-2021 Determination of five kinds of selenium in selenium-enriched agricultural products by ion chromatography-inductively coupled plasma mass spectrometry
  • T/NAIA 0168-2022 Water Quality Determination of Perchlorate by Ion Chromatography
  • T/QAS 033-2021 Determination of Iodine in Brine by Inductively Coupled Plasma Mass Spectrometry
  • T/QAS 083-2023 Determination of Brine Bromine by Inductively Coupled Plasma Mass Spectrometry
  • T/CAIA SH010-2017 Sake Determination of Pb and As ICP-MS method
  • T/QAS 070-2021 Determination of Rubidium and Cesium in Brine Inductively Coupled Plasma Mass Spectrometry
  • T/QAS 069-2021 Determination of uranium and thorium in brines by inductively coupled plasma mass spectrometry
  • T/QAS 047-2021 Determination of barium and strontium in brine by inductively coupled plasma mass spectrometry
  • T/CMES 08002-2020 Determination of Ferroniobium Impurity Elements by Inductively Coupled Plasma Atomic Emission Spectrometry
  • T/QAS 007-2019 Determination of Lithium in Brine-Inductively Coupled Plasma Mass Spectrometry
  • T/NAIA 0212-2023 Determination of Multiple Elements in Lycium Barbarum by Inductively Coupled Plasma Mass Spectrometry
  • T/SATA 020-2021 Determination of Multiple Elements in Seawater by Inductively Coupled Plasma Mass Spectrometry
  • T/GXAS 346-2022 Determination of selenium species in peanut by high performance liquid chromatography inductively coupled plasma mass spectrometry
  • T/SATA 037-2022 Ambient air-Determination of metals in precipitation-Inductively coupled plasma-mass spectrometry
  • T/SXSL 10-2022 Determination of lead, arsenic, chromium and cadmium in feeds Inductively coupled plasma mass spectrometry
  • T/GXAS 480-2023 Soil and sediments-Determination of boron-Inductively coupled plasma mass spectrometry(ICP-MS)
  • T/NAIA 0209-2023 Determination of Rare Earth Elements in Lycium Barbarum by Inductively Coupled Plasma Mass Spectrometry
  • T/NAIA 0159-2022 Determination of Multiple Elements in Wine by Inductively Coupled Plasma Mass Spectrometry
  • T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
  • T/CNIA 0017-2019 Determination of Impurity Content in Chlorosilanes for Polysilicon by Inductively Coupled Plasma Mass Spectrometry
  • T/SATA 041-2023 Determination of organic selenium content by liquid chromatography-inductively coupled plasma mass spectrometry in foods
  • T/CNIA 0120-2021 Determination of trace impurity elements in high-purity nitric acid for the electronics industry by inductively coupled plasma mass spectrometry
  • T/QAS 049-2021 Determination of 15 Rare Earth Elements in Brine by Inductively Coupled Plasma Mass Spectrometry
  • T/CNIA 0061-2020 Determination of Impurity Content in Silicon Tetrachloride for Silicon Epitaxy by Inductively Coupled Plasma Mass Spectrometry
  • T/CNIA 0118-2021 Determination of trace impurity elements in high-purity hydrofluoric acid for the electronics industry by inductively coupled plasma mass spectrometry
  • T/SDAQI 060-2021 Determination of Nickel, Cobalt, Vanadium, Thallium in Fertilizer by Inductively Coupled Plasma Mass spectrometry
  • T/CMES 08001-2020 Determination of Ferrochrome Impurity Elements by Inductively Coupled Plasma Primary Emission Spectrometry
  • T/NXCL 025-2023 Method for chemical analysis of beryllium — Determination of boron,cobalt,silver,lead,cadmium and lithium contents—Inductively coupled plasma mass spectrometry
  • T/GRM 047-2022 Determination of Mercury Isotope in Natural Gas by Inductively Coupled Plasma Mass Spectrometry
  • T/GRM 043-2022 Determination of magnesium isotope in rock, minerals, and soil by multi-collector inductively coupled plasma mass spectrometry
  • T/GRM 042-2022 Determination of potassium isotope in rock, minerals, and soil by multi-collector inductively coupled plasma mass spectrometry
  • T/CASAS 009-2019 Determination of Trace Impurities Concentration and Distribution in Semi-insulating SiC Materials by Secondary Ion Mass Spectrometry
  • T/CNIA 0141-2022 Determination of metal impurity content in hydrogen for polysilicon production by inductively coupled plasma mass spectrometry

International Organization for Standardization (ISO), ion mass spectrometry

  • ISO 13084:2018 Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • ISO 22048:2004 Surface chemical analysis — Information format for static secondary-ion mass spectrometry
  • ISO 14911:1998 Water quality - Determination of dissolved Li<(hoch)+>, Na<(hoch)+>, NH<(Index)4><(hoch)+>, K<(hoch)+>, Mn<(hoch)2+>, Ca<(hoch)2+>, Mg<(hoch)2+>, Sr<(hoch)2+> and Ba<(hoch)2+> using ion chromatography - Method for water and waste water
  • ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
  • ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
  • ISO 20411:2018 Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
  • ISO 12010:2019 Water quality — Determination of short-chain polychlorinated alkanes (SCCP) in water — Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • ISO 19340:2017 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC)
  • ISO 23919:2020 Cigarettes — Determination of ammonia in cigarette mainstream smoke using ion chromatography
  • ISO 23830:2008 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
  • ISO 15061:2001 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions
  • ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 11885:1996 Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy
  • ISO 18114:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
  • ISO 18114:2021 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
  • ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
  • ISO 14237:2000 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
  • ISO 20295:2018 Soil quality - Determination of perchlorate in soil using ion chromatography
  • ISO/TS 16965:2013 Soil quality.Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
  • ISO/FDIS 17294-1:2023 Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines
  • ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
  • ISO 17294-1:2004 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines
  • ISO/DIS 17294-1 Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines
  • ISO 22125-2:2019 Water quality — Technetium-99 — Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS)
  • ISO/CD 16965:2023 Environmental solid matrices — Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
  • ISO 16531:2013 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
  • ISO/DIS 24384 Water quality — Determination of chromium(VI) and chromium(III) in water — Method using liquid chromatography with inductively coupled plasma mass spectrometry (LC-ICP-MS) after chelating pretreatment
  • ISO/CD 18240:1976 Iron ores — Determination of chromium, arsenic, cadmium, lead and mercury — Inductively coupled plasma-mass spectrometic method
  • ISO 22818:2021 Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS)
  • ISO 12406:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of arsenic in silicon
  • ISO 17560:2014 Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of boron in silicon
  • ISO 17294-2:2003 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of 62 elements

国家市场监督管理总局、中国国家标准化管理委员会, ion mass spectrometry

  • GB/T 40129-2021 Surface chemical analysis—Secondary ion mass spectrometry—Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • GB/T 37837-2019 General rules for quadrupole inductively coupled plasma mass spectrometry
  • GB/T 41153-2021 Determination of boron, aluminum and nitrogen impurity content in silicon carbide single crystal—Secondary ion mass spectrometry
  • GB/T 39144-2020 Test method for magnesium content in gallium nitride materials—Secondary ion mass spectrometry
  • GB/T 40798-2021 Chemical analysis method of ion-adsorption rare earth ore—Determination of total rare earth contents—Inductively coupled plasma mass spectrometry
  • GB/T 37049-2018 Test method for the content of metal impurity in electronic grade polysilicon—Inductively coupled-plasma mass spectrometry method
  • GB/T 37907-2019 Reclaimed water quality—Determination of sulfide and cyanide—Ion chromatography
  • GB/T 39486-2020 Chemical reagent—General rules for inductively coupled plasma mass spectrometry
  • GB/T 7739.14-2019 Methods for chemical analysis of gold concentrates—Part 14: Determination of thallium content—Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry
  • GB/T 40231-2021 Restricted substance in electrical and electronic products—Determination of hexavalent chromium—Ion chromatography method
  • GB/T 40109-2021 Surface chemical analysis—Secondary-ion mass spectrometry—Method for depth profiling of boron in silicon
  • GB/T 40895-2021 Determination of prohibited tetracaine and its salts in cosmetics—Ion chromatography
  • GB/T 39145-2020 Test method for the content of surface metal elements on silicon wafers—Inductively coupled plasma mass spectrometry

Korean Agency for Technology and Standards (KATS), ion mass spectrometry

  • KS I ISO 14911:2009 Water quality-Determination of dissolved Li+, Na+,NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography-Method for water and waste water
  • KS D ISO 22048-2005(2020) Surface chemical analysis - Information format for static secondary-ion mass spectrometry
  • KS D ISO 22048:2005 Surface chemical analysis - Information format for static secondary-ion mass spectrometry
  • KS I ISO 17294:2014 Water quality — Application of inductively coupled plasma mass spectrometry(ICP-MS)
  • KS I ISO 17294-2014(2021) Water quality — Application of inductively coupled plasma mass spectrometry(ICP-MS)
  • KS D ISO 18114-2005(2020) Surface chemical analysis-Secondary-ion mass spectrometry-Determination of relative sensitivity factors from ion-implanted reference materials
  • KS I ISO 12010:2022 Water quality — Determination of short-chain polychlorinated alkanes(SCCPs) in water — Method using gas chromatography-mass spectrometry(GC-MS) and negative-ion chemical ionization(NCI)
  • KS I ISO 12010:2014 Water quality — Determination of short-chain polychlorinated alkanes(SCCPs) in water — Method using gas chromatography-mass spectrometry(GC-MS) and negative-ion chemical ionization(NCI)
  • KS I ISO 15061-2006(2021) Water quality-Determination of dissolved bromate-Method by liquid chromatography of ions
  • KS I ISO 15061-2006(2016) Water quality-Determination of dissolved bromate-Method by liquid chromatography of ions
  • KS I ISO 15061:2006 Water quality-Determination of dissolved bromate-Method by liquid chromatography of ions
  • KS D ISO 18114:2005 Surface chemical analysis-Secondary-ion mass spectrometry-Determination of relative sensitivity factors from ion-implanted reference materials
  • KS L 1627-2014(2019) Testing method of impurities in high purity cobalt ingot by inductively coupled plasma spectrometric
  • KS I ISO 10304-4:2008 Water quality-Determination of dissolved anions by liquid chromatography of ions-Part 4:Determination of chlorate, chloride and chlorite in water with low contamination
  • KS I ISO 11632:2004 Stationary source emissions-Determination of the massconcentration of sulfur dioxide(Ion chromatography method)
  • KS I ISO 11632:2014 Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
  • KS I ISO 11632-2014(2019) Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
  • KS I ISO 20295:2019 Soil quality — Determination of perchlorate in soil using ion chromatography
  • KS I ISO 17294-1:2010 Water quality-Application of inductively coupled plasma mass spectrometry(ICP-MS)-Part 1:General guidelines
  • KS L 1627-2014 Testing method of impurities in high purity cobalt ingot by inductively coupled plasma spectrometric
  • KS I ISO 11885-2008(2018) Water quality-Determination of selected elements by inductively coupled plasma optical emission spectrometry(ICP-OES)
  • KS I ISO 17294-2:2010 Water quality-Application of inductively coupled plasma mass spectrometry(ICP-MS)-Part 2:Determination of 62 elements

British Standards Institution (BSI), ion mass spectrometry

  • BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
  • BS ISO 20411:2018 Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
  • BS ISO 22048:2004 Surface chemical analysis. Information format for static secondary-ion mass spectrometry
  • BS ISO 22048:2005 Surface chemical analysis - Information format for static secondary-ion mass spectrometry
  • BS ISO 13084:2018 Tracked Changes. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • BS ISO 23830:2008 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
  • BS ISO 23919:2020 Cigarettes. Determination of ammonia in cigarette mainstream smoke using ion chromatography
  • BS EN ISO 15061:2001 Water quality. Determination of dissolved bromate. Method by liquid chromatography of ions
  • BS ISO 17862:2013 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS ISO 18114:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
  • BS PD CEN/TR 13931:2009 Rotodynamic pumps . Forces and moments on flanges . Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps
  • PD CEN/TR 13931:2009(2010) Rotodynamic pumps . Forces and moments on flanges . Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps
  • BS ISO 17294-1:2004 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - General guidelines
  • BS EN ISO 17294-1:2004 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - General guidelines
  • BS DD ENV 12142:1997 Method for determination of stable hydrogen isotope ratio (2H/1H) of water from fruit juices, using isotope ratio mass spectrometry
  • BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
  • BS DD ENV 12140:1997 Method for determination of stable carbon isotope ratio (13C/12C) of sugars from fruit juices, using isotope ratio mass spectrometry
  • BS DD ENV 12141:1997 Method for determination of stable oxygen isotope ratio (18O/16O) of water from fruit juices, using isotope ratio mass spectrometry
  • BS EN ISO 22125-2:2019 Water quality. Technetium-99 - Test method using inductively coupled plasma mass spectrometry (ICP-MS)
  • BS ISO 20295:2018 Soil quality. Determination of perchlorate in soil using ion chromatography
  • BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • 19/30394348 DC BS ISO 23919. Cigarettes. Determination of ammonia in cigarette mainstream smoke using ion chromatography
  • 20/30409889 DC BS ISO 18114. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
  • BS ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
  • PD ISO/TS 16965:2013 Soil quality. Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
  • BS ISO 18114:2021 Tracked Changes. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
  • BS EN 13273:2001 Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC)
  • BS ISO 12010:2012 Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • BS EN ISO 12010:2019 Tracked Changes. Water quality. Determination of short-chain polychlorinated alkanes (SCCP) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • BS ISO 17294-2:2003 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Determination of 62 elements
  • BS EN ISO 17294-2:2003 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Determination of 62 elements
  • 20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
  • BS DD ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
  • BS EN ISO 19340:2017 Water quality. Determination of dissolved perchlorate. Method using ion chromatography (IC)
  • BS EN ISO 10304-4:2022 Water quality. Determination of dissolved anions by liquid chromatography of ions - Determination of chlorate, chloride and chlorite in water with low contamination
  • BS EN 62321-5:2014 Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
  • 19/30376495 DC BS EN 17374. Animal feeding stuffs: Methods of sampling and analysis. Determination of inorganic arsenic in animal feed by anion-exchange HPLC-ICPMS
  • BS EN ISO 22818:2021 Textiles. Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry
  • BS ISO 16531:2013 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
  • BS ISO 12406:2010 Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of arsenic in silicon

German Institute for Standardization, ion mass spectrometry

  • DIN EN ISO 14911:1999 Water quality - Determination of dissolved Li<(hoch)+>, Na<(hoch)+>, NH<(Index)4><(hoch)+>, K<(hoch)+>, Mn<(hoch)2+>, Ca<(hoch)2+>, Mg<(hoch)2+>, Sr<(hoch)2+> and Ba<(hoch)2+> using ion chromatography - Method for water and waste water (ISO 14911:1998); G
  • DIN EN ISO 17294-1:2022-07 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO/DIS 17294-1:2022); German and English version prEN ISO 17294-1:2022 / Note: Date of issue 2022-06-17*Intended as replacement for DIN ...
  • DIN 51002:2020-07 Inductively coupled plasma mass spectrometry (ICP-MS) - Principles and definitions
  • DIN EN ISO 15061:2001 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001); German version EN ISO 15061:2001
  • DIN EN ISO 12010:2019-09 Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2019); German version EN ISO 12010:2019
  • DIN 6801-1:2019-09 Procedures of dosimetry with probe-type detectors for proton and ion radiation - Part 1: Ionization chambers
  • DIN EN 13273:2001 Surface active agents - Determination of the contents of non-ionic substances in anionic surface active agents by high performance liquid chromatograph (HPLC); German version EN 13273:2001
  • DIN 51002-1:2004 Inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: Principles and definitions
  • DIN EN ISO 15061:2001-12 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001); German version EN ISO 15061:2001
  • DIN EN 13273:2001-06 Surface active agents - Determination of the contents of non-ionic substances in anionic surface active agents by high performance liquid chromatograph (HPLC); German version EN 13273:2001
  • DIN EN ISO 12010:2019 Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2019)
  • DIN EN ISO 17294-1:2007-02 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004); German version EN ISO 17294-1:2006 / Note: To be replaced by DIN EN ISO 17294-1 (2022-07).
  • DIN V ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) without separation of the lead matrix; German version ENV 13800:2000
  • DIN EN ISO 17294-1:2007 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004); English version of DIN EN ISO 17294-1:2007-02
  • DIN EN ISO 19340:2019-01 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017); German version EN ISO 19340:2017
  • DIN EN ISO 22125-2:2019-10 Water quality - Technetium-99 - Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO/FDIS 22125-2:2019); German and English version FprEN ISO 22125-2:2019 / Note: Date of issue 2019-08-30
  • DIN EN ISO 17294-2:2005 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of 62 elements (ISO 17294-2:2003); German version EN ISO 17294-2:2004

未注明发布机构, ion mass spectrometry

Japanese Industrial Standards Committee (JISC), ion mass spectrometry

  • JIS K 0158:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
  • JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • JIS K 0168:2011 Surface chemical analysis -- Information format for static secondary-ion mass spectrometry
  • JIS K 0133:2000 General rules for high frequency plasma mass spectrometry
  • JIS K 0133:2007 General rules for high frequency plasma mass spectrometry
  • JIS K 0153:2015 Surface chemical analysis -- Secondary-ion mass spectrometry -- Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
  • JIS K 0163:2010 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of relative sensitivity factors from ion-implanted reference materials
  • JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
  • JIS K 0164:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
  • JIS K 0143:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials

National Metrological Technical Specifications of the People's Republic of China, ion mass spectrometry

  • JJF 1715-2018 Program of Pattern Evaluation of Ion Chromatographs
  • JJF 1159-2006 Calibration Specification for Quadrupole Inductively Coupled Plasma Mass Spectrometers

European Committee for Standardization (CEN), ion mass spectrometry

  • EN ISO 14911:1999 Water Quality - Determination of Dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ Using Ion Chromatography - Method for Water and Waste Water ISO 14911:1998
  • EN ISO 12010:2014 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • CEN/TR 13931:2009 Rotodynamic pumps - Forces and moments on flanges - Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps
  • EN ISO 11885:1997 Water Quality - Determination of 33 Elements by Inductively Coupled Plasma Atomic Emission Spectroscopy ISO 11885:1996
  • EN ISO 22125-2:2019 Water quality - Technetium-99 - Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO 22125-2:2019)
  • EN ISO 17294-1:2006 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines
  • EN ISO 15061:2001 Water Quality - Determination of Dissolved Bromate - Method by Liquid Chromatography of Ions ISO 15061:2001
  • EN ISO 10304-4:2022 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:2022)
  • EN ISO 11885:2009 Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
  • EN ISO 22818:2021 Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (I

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, ion mass spectrometry

  • GB/T 31197-2014 Inorganic chemicals for industrial use.Determination of impurity anions.Ion chromatography method
  • GB/T 25186-2010 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of relative sensitivity factors from ion-implanted reference materials
  • GB/T 42263-2022 Determination of nitrogen content in silicon single crystal—Secondary ion mass spectrometry method
  • GB/T 32193-2015 Standard practice for testing flame ionization detectors used in gas or supercritical fluid chromatography
  • GB/T 23199-2008 Determination of rare earth elments in tea.Inductive coupled plasma atomic emission spectrometer and inductive coupled plasma mass spectrometer
  • GB/T 23374-2009 Determination of aluminium in foods.Inductively coupled plasma mass spectrometry
  • GB/T 23372-2009 Determination of inorganic-arsenic in foods.Liquid chromatography-inductive coupled plasma mass spectrometer
  • GB/T 20176-2006 Surface chemical analysis.Secondary-ion mass spectrometry.Determination of boron atomic concentration in silicon using uniformly doped materials
  • GB/T 24582-2009 Test method for measuring surface metal contamination of polycrystalline silicon by acid extraction-inductively coupled plasma mass spectrometry
  • GB/T 32650-2016 Determining the content of trace elements in arenaceous quartz by inductively coupled plasma mass spectrometry (ICP-MS)
  • GB/T 9984.3-2004 Sodium tripolyphosphate for industrial use-Separation by ion exchange chromatography and determination of the different phosphate forms
  • GB/T 9984.3-1988 Sodium tripolyphosphate for industrial use--Separation by ion exchange chromatography and determination of the different phosphate forme
  • GB/T 30714-2014 Determination of rare earth in ink-stone by inductively coupled plasma mass spectrometry
  • GB/T 22290-2008 Determination of rare earth in tea by inductively coupled plasma mass spectrometry
  • GB/T 30903-2014 Inorganic chemicals for industrial use.Determination of impurity element.Inductively coupled plasma mass spectrometry(ICP-MS)
  • GB/T 32495-2016 Surface chemical analysis.Secondary-ion mass spectrometry.Method for depth profiling of arsenic in silicon
  • GB/T 32548-2016 Steel and iron.Determination of tin, antimony, cerium, lead and bismuth.Inductively coupled plasma mass spectrometric method
  • GB/T 24580-2009 Test method for measuring Boron contamination in heavily doped n-type silicon substrates by secondary ion mass spectrometry
  • GB/T 6730.86-2023 Determination of Radionuclides in Iron Ore by Inductively Coupled Plasma Mass Spectrometry
  • GB/T 24582-2023 Determination of metal impurity content on polysilicon surface by acid leaching-inductively coupled plasma mass spectrometry
  • GB/T 12690.13-2003 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides-Determination of molybdenum and tungsten content-Inductively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum me
  • GB/T 24575-2009 Test method for measuring surface sodium, aluminum, potassium, and iron on silicon and epi substrates by secondary ion mass spectrometry
  • GB/T 24875-2010 Determination of lead, cadmium, chromium,mercury contents in animal manure-Inductively coupled plasma mass spectrometry method
  • GB/T 29851-2013 Test method for measuring boron and aluminium in silicon materials used for photovoltaic applications by secondary ion mass spectrometry
  • GB/T 42240-2022 Nanotechnology—Measurement of metallic impurities in graphene powder—Inductively coupled plasma mass spectrometry
  • GB/T 223.87-2018 Iron, steel and alloy.Determination of calcium and magnesium.Inductively coupled plasma mass spectrometric method
  • GB/T 29852-2013 Test method for measuring phosphorus, arsenic and antimony in silicon materials used for photovoltaic applications by secondary ion mass spectrometry

Association Francaise de Normalisation, ion mass spectrometry

  • NF T90-048*NF EN ISO 14911:1999 Water quality - Determination of dissolved Li+, Na+, NH 4+, K+, Mn 2+, Ca 2+, Mg 2+, Sr 2+ and Ba 2+ using ion chromatography - Method for water and waste water.
  • NF ISO 23830:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Répétabilité et constance de l'échelle des intensités relatives en spectrométrie statique de masse des ions secondaires
  • NF EN ISO 10304-4:2022 Qualité de l'eau - Dosage des anions dissous par chromatographie des ions en phase liquide - Partie 4 : dosage des ions chlorate, chlorure et chlorite dans des eaux faiblement contaminées
  • NF EN ISO 19340:2018 Qualité de l'eau - Détermination du perchlorate dissous - Méthode par chromatographie ionique (IC)
  • NF EN ISO 15061:2001 Qualité de l'eau - Dosage du bromate dissous - Méthode par chromatographie des ions en phase liquide
  • NF X21-064*NF ISO 23830:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry.
  • NF T90-052*NF EN ISO 15061:2001 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions.
  • NF EN ISO 22125-2:2019 Qualité de l'eau - Technétium-99 - Partie 2 : méthode d'essai par spectrométrie de masse couplée à un plasma induit )
  • NF T90-046:2014 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • NF X21-070*NF ISO 14237:2010 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials.
  • NF T90-375*NF EN ISO 19340:2018 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC)
  • NF EN 1785:2003 Produits alimentaires - Détection d'aliments ionisés contenant des lipides - Analyse par chromatographie en phase gazeuse/Spectrométrie de masse des 2-alkylcytobutanones
  • NF EN 13273:2001 Agents de surface - Détermination de la teneur en substances non-ioniques dans les agents de surface anioniques par chromatographie liquide à haute performance (CLHP)
  • NF EN ISO 17294-1:2007 Qualité de l'eau - Application de la spectrométrie de masse avec plasma à couplage inductif (ICP-MS) - Partie 1 : lignes directrices générales
  • NF T73-263*NF EN 13273:2001 Surface active agents - Determination of the contents of non-ionic susbstances in anionic surface active agents by high performance liquid chromatography (HPLC).
  • NF X43-338*NF ISO 11632:1998 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Ion chromatography method.
  • XP A06-422*XP ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
  • NF T90-163*NF EN ISO 17294-1:2007 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1 : general guidelines
  • NF EN ISO 10304-3:1997 Qualité de l'eau - Dosage des anions dissous par chromatographie des ions en phase liquide - Partie 3 : dosage des ions chromate, iodure, sulfite, thiocyanate et thiosulfate
  • XP A06-421*XP ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
  • NF C05-100-4*NF EN 62321-4:2014 Determination of certain substances in electrotechnical products - Part 4 : mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
  • NF C63-076:1987 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. FORM A,FOR DIRECT CURRENT,3 OR 4 TERMINALS. (EUROPEAN STANDARD EN 50 008).
  • NF C63-077:1987 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. FORM C,FOR DIRECT CURRENT,3 OR 4 TERMINALS. (EUROPEAN STANDARD EN 50 025).
  • NF G08-030*NF EN ISO 22818:2021 Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS)
  • XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
  • NF C05-100-5*NF EN 62321-5:2014 Determination of certain substances in electrotechnical products - Part 5 : cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
  • NF EN 1784:2003 Produits alimentaires - Détection d'aliments ionisés contenant des lipides - Analyse par chromatographie en phase gazeuse des hydrocarbures
  • NF T90-164:2005 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2 : determination of 62 elements.

Professional Standard - Agriculture, ion mass spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, ion mass spectrometry

  • GB/T 35925-2018 Determination of impurity fluorine ion in water soluble chemicals—Ion chromatography method
  • GB/T 4702.15-2016 Chromium metal—Determination of lead,tin,bismuth,antimony and asenic content—Inductively coupled plasma mass spectrometric method
  • GB/T 20899.14-2017 Methods for chemical analysis of gold ores-Part 14: Determination of thallium content - Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry
  • GB/T 8152.13-2017 Methods for chemical analysis of lead concentrates—Part 13:Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry
  • GB/T 8151.21-2017 Methods for chemical analysis of zinc concentrates—Part 21:Determination of thallium content—Inductively coupled plasma mass spectrometry and inductively coupled plasma-atomic emission spectrometry
  • GB/T 34826-2017 Method of performance testing for quadrupole inductively coupled plasma mass spectrometer
  • GB/T 34972-2017 Determination of metal content in gases—Inductively coupled plasma mass spectrometry method
  • GB/T 35418-2017 Nanotechnologies—Determination of elemental impurities in samples of carbon nanotubes—Inductively coupled plasma mass spectrometry
  • GB/T 35828-2018 Determination of chromium,arsenic,cadmium,stibium,and lead in cosmetics—Inductively coupled plasma mass spectrometry
  • GB/T 33351.1-2016 Determination of arsenic,beryllium,antimony in electrical and electronic products—Part 1:Inductively coupled plasma mass spectrometry spectrometry

Professional Standard - Geology, ion mass spectrometry

  • DZ/T 0064.51-1993 Groundwater quality testing methods - Determination of chloride, fluoride, bromide, nitrate and sulfate by ion chromatography
  • DZ/T 0064.80-1993 Determination of 39 elements such as lithium by plasma mass spectrometry
  • DZ/T 0064.28-1993 Groundwater quality testing methods - Determination of potassium, sodium, lithium and ammonium by ion chromatography
  • DZ/T 0064.42-1993 Groundwater Quality Inspection Method Determination of Strontium and Barium by Inductively Coupled Plasma Atomic Emission Spectrometry

Professional Standard - Commodity Inspection, ion mass spectrometry

  • SN/T 2210-2008 Determination of hexavalent chromium in health foods.IC-ICP-MS method
  • SN/T 0864-2011 Determination of aluminium in foods for export.Inductively coupled plasma mass spectrometry
  • SN/T 2698-2010 Elemental analysis of impurities in tungsten products.Inductively coupled plasma atomic emission spectrometric method
  • SN/T 3821-2014 Determination of hexavalent chromium in cosmetics for export.Liquid chromatography-inductively coupled plasma mass spectrometry
  • SN/T 2263-2009 Determination of arsenic,bromine and iodine in coal and coke.Inductively coupled plasma mass spectrometry(ICP-MS)
  • SN/T 3363-2012 Determination of impurity elements in pig lead.Inductively coupled plasma atomic emission spectrometry
  • SN/T 2765.2-2013 Determination of arsenic, chromium, cadimium, lead and mercury in iron ores.Inductively coupled plasma mass spectrometry(ICP-MS)
  • SN/T 3154-2012 Determination of iodine content in algae plant for export.Inductively coupled plasma mass spectrometry method
  • SN/T 3516-2013 Determination of lead iron cadmium copper tin antimony in high-purity zinc.Inductively coupled plasma mass spectrometry
  • SN/T 3828-2014 Determination of stibium in cosmetics for import and export.ICP-MS method

American Society for Testing and Materials (ASTM), ion mass spectrometry

  • ASTM E1097-97 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
  • ASTM E10-08 Standard Test Method for Brinell Hardness of Metallic Materials
  • ASTM E10-15 Standard Test Method for Brinell Hardness of Metallic Materials
  • ASTM E1504-92(1996) Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1504-92(2001) Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1504-06 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1504-11(2019) Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1504-11 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1097-07 Standard Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis
  • ASTM E2695-09 Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy
  • ASTM UOP1031-19 Chromium (III) and Chromium (VI) Speciation in Water by IC-ICP-MS (Ion Chromatography- Inductively Coupled Plasma Mass Spectrometry)
  • ASTM D5996-05 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
  • ASTM E1832-08 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
  • ASTM E1832-08(2017) Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
  • ASTM E1635-06(2011) Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1162-87(2001) Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1162-87(1996) Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM D6357-19 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
  • ASTM D6357-21 Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively
  • ASTM E1097-12 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
  • ASTM E1097-12(2017) Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
  • ASTM E1832-96e2 Standard Practice for Describing and Specifying a Direct-Current-Plasma Optical Emission Spectrometer
  • ASTM E1097-03 Standard Guide for Direct Current Plasma Emission Spectrometry Analysis
  • ASTM D1971-95 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
  • ASTM D1971-16 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
  • ASTM D1971-16(2021)e1 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
  • ASTM C1111-98 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
  • ASTM E1635-06 Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1635-95(2000) Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1635-06(2019) Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
  • ASTM E1881-12 Standard Guide for Cell Culture Analysis with SIMS
  • ASTM D5739-00 Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • ASTM D5739-06(2020) Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • ASTM D5739-06 Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • ASTM D4190-03 Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
  • ASTM D4190-82(1988)e1 Standard Test Method for Elements in Water by Direct-Current Argon Plasma atomic Emission Spectroscopy
  • ASTM D4190-15 Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy
  • ASTM C1432-03 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • ASTM C1432-99 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • ASTM C1432-03(2008) Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • ASTM C1432-15 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
  • ASTM E1438-91(2001) Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
  • ASTM E1438-91(1996) Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
  • ASTM E1881-06 Standard Guide for Cell Culture Analysis with SIMS
  • ASTM D5739-06(2013) Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • ASTM E1832-08(2012) Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
  • ASTM D1971-02(2006) Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
  • ASTM D1971-02 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
  • ASTM D1971-11 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
  • ASTM C1590-04 Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
  • ASTM C1476-00 Standard Test Method for Analysis of Urin for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
  • ASTM C1845-16 Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
  • ASTM C1111-04 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
  • ASTM E1552-08 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasmax2014;Atomic Emission Spectrometry
  • ASTM C1111-10 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
  • ASTM D6357-00a Test Methods for Determination of Trace Elements in Coal, Coke, Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, Graphite Furnace Atomic Absorption Spectrometry
  • ASTM C1287-95(2001) Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma Mass Spectrometry
  • ASTM C1310-95(2001) Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration
  • ASTM E2371-13 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
  • ASTM C1476-06 Standard Test Method for Analysis of Urine for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
  • ASTM C1287-10 Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry

Shandong Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB37/T 4152-2020 Determination of water quality glyphosate ion chromatography
  • DB37/T 4151-2020 Determination of Acrylic Acid in Water by Ion Chromatography
  • DB37/T 3023.1-2017 Determination of Toxic Substances in Workplace Air Part 1: Formic Acid Ion Chromatography
  • DB37/T 3023.2-2017 Determination of Toxic Substances in Workplace Air Part 2: Acetate Ion Chromatography
  • DB37/T 3023.3-2017 Determination of Toxic Substances in Workplace Air Part 3: Chloroacetic Acid Ion Chromatography
  • DB37/T 3936-2020 Determination of lead, cadmium, chromium and nickel in oil products by inductively coupled plasma mass spectrometry

工业和信息化部, ion mass spectrometry

  • YS/T 1497-2021 Analysis method for platinum compounds Determination of impurity anion content Ion chromatography
  • YS/T 1496-2021 Analysis method for palladium compounds Determination of impurity anion content Ion chromatography
  • SJ/T 11637-2016 General principles of inductively coupled plasma mass spectrometry for electronic chemicals
  • YS/T 1050.10-2016 Methods for chemical analysis of lead and antimony concentrates Part 10 Determination of thallium content Inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 445.14-2019 Methods for chemical analysis of silver concentrates Part 14: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 1171.13-2021 Methods for chemical analysis of recycled zinc raw materials Part 13: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 461.12-2016 Methods for chemical analysis of mixed lead-zinc concentrates Part 12: Determination of thallium content by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry
  • SJ/T 11555-2015 Determination of metal element content in nitric acid using inductively coupled plasma mass spectrometry

Standard Association of Australia (SAA), ion mass spectrometry

  • AS ISO 22048:2006 Surface chemical analysis - Information format for static secondary-ion mass spectrometry
  • AS ISO 18114:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
  • AS 4873.2:2009

Professional Standard - Tobacco, ion mass spectrometry

  • YC/T 377-2010 Cigarettes.Determination of ammonia in mainstream cigarette smoke.Ion chromatography method
  • YC/T 379-2010 Cigarettes.Determination of chromium,nickel,arsenic,selenium,cadmium,lead in mainstream cigarette smoke.Inductively coupled plasma mass spectrometry method
  • YC/T 403-2011 Cigarettes.Determination of hydrogen cyanide in mainstream smoke.Ion chromatographic method
  • YC/T 348-2010 Cigarettes-Determination of nitrogen oxides in cigarette mainstream smoke-Ion chromatograhic method

国家烟草专卖局, ion mass spectrometry

  • YC/T 377-2017 Determination of ammonia in mainstream cigarette smoke by ion chromatography

Jiangxi Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB36/T 1839-2023 Determination of iodide in water quality by inductively coupled plasma mass spectrometry

KR-KS, ion mass spectrometry

  • KS I ISO 12010-2022 Water quality — Determination of short-chain polychlorinated alkanes(SCCPs) in water — Method using gas chromatography-mass spectrometry(GC-MS) and negative-ion chemical ionization(NCI)
  • KS I ISO 17294-2014 Water quality — Application of inductively coupled plasma mass spectrometry(ICP-MS)
  • KS H ISO 23919-2023 Cigarettes — Determination of ammonia in cigarette mainstream smoke using ion chromatography
  • KS I ISO 12010-2014 Water quality — Determination of short-chain polychlorinated alkanes(SCCPs) in water — Method using gas chromatography-mass spectrometry(GC-MS) and negative-ion chemical ionization(NCI)
  • KS I ISO 17294-1-2010 Water quality-Application of inductively coupled plasma mass spectrometry(ICP-MS)-Part 1:General guidelines
  • KS I ISO 20295-2019 Soil quality — Determination of perchlorate in soil using ion chromatography
  • KS I ISO 17294-2-2010 Water quality-Application of inductively coupled plasma mass spectrometry(ICP-MS)-Part 2:Determination of 62 elements

Professional Standard - Education, ion mass spectrometry

  • JY/T 0568-2020 General rules for inductively coupled plasma-mass spectrometry

Professional Standard - Public Safety Standards, ion mass spectrometry

  • GA/T 1628-2019 Glyphosate Detection in Forensic Science Biological Samples by Ion Chromatography-Mass Spectrometry
  • GA/T 1320-2016 GC-MS examination methods for fluoride ion in urine and blood in forensic science
  • GA/T 1916-2021 Fluoroacetate Ion Detection in Forensic Science Biological Samples by Liquid Chromatography-Mass Spectrometry
  • GA/T 933-2011 Gas chromatography and gas chromatography-mass spectrometry detection method for fluoroacetate ions in biological samples

ZA-SANS, ion mass spectrometry

  • SANS 163-2:1995 Water quality - Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
  • SANS 163-1:1992 Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination
  • SANS 11885:1996 Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy

CEN - European Committee for Standardization, ion mass spectrometry

  • EN ISO 12010:2019 Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • EN ISO 19340:2017 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC)

RO-ASRO, ion mass spectrometry

  • STAS SR 8662-1-1997 Water quality - Determination of manganese - Spectrometric method with manganese oxidation at the permanganic ion

Danish Standards Foundation, ion mass spectrometry

  • DS/EN ISO 15061:2001 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions
  • DS/ISO 12010:2012 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • DS/EN 13273:2001 Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatograph (HPLC)
  • DS/ISO/TS 16965:2013 Soil quality - Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS)
  • DS/ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
  • DS/ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix
  • DS/EN ISO 17294-1:2007 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guideline
  • DS/ENV 13800:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
  • DS/ISO 22818:2021 Textiles – Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS)
  • DS/EN ISO 22818:2021 Textiles – Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (I
  • DS/EN ISO 17294-2:2005 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of 62 elements

UNKNOWN, ion mass spectrometry

  • GB 20077663-T-604 Flame ionization detector test method for gas chromatography/supercritical fluid chromatography

Association of German Mechanical Engineers, ion mass spectrometry

  • DVS 0911-1-1977 "Forms of ends of tungsten electrodes for gas-shielded tungsten arc welding with direct and alternating current, plasma welding and plasma fusion cutting"

Sichuan Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB51/T 1782-2014 Determination of Niobium and Tantalum in Geological Samples by Inductively Coupled Plasma Mass Spectrometry
  • DB51/T 2112-2016 Determination of Gold in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry
  • DB51/T 2114-2016 Determination of Platinum and Palladium in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry

Professional Standard - Light Industry, ion mass spectrometry

  • QB/T 4711-2014 Determination of inorganic elements in Chinese rice wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry
  • QB/T 4851-2015 Determination of inorganic elements in wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry

RU-GOST R, ion mass spectrometry

  • GOST R 57061-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma mass spectrometry method
  • GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
  • GOST R 56219-2014 Water. Determination of 62 elements by inductively coupled plasma mass spectrometry (ICP-MS) method
  • GOST 34247-2017 Copper concentrate. Measurement of copper and impurities weight fraction by an inductively coupled plasma atomic emission spectrometry method

Professional Standard - Electron, ion mass spectrometry

  • SJ/T 11493-2015 Test method for measuring nitrogen concentration in silicon substrates by secondary ion mass spectrometry
  • SJ/T 11498-2015 Test method for measuring oxygen contamination in heavily doped silicon substrates by secondary ion mass spectrometry

Qinghai Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB63/T 1849-2020 Determination of Lithium in Brine by Inductively Coupled Plasma Mass Spectrometry

ES-UNE, ion mass spectrometry

  • UNE-EN ISO 12010:2020 Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2019)
  • UNE-EN 13273:2002 Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC).
  • UNE-EN ISO 19340:2018 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO 19340:2017)
  • UNE-EN ISO 22125-2:2019 Water quality - Technetium-99 - Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO 22125-2:2019) (Endorsed by Asociación Española de Normalización in January of 2020.)

国家能源局, ion mass spectrometry

  • SY/T 6404-2018 Inductively coupled plasma atomic emission spectrometry and mass spectrometry analysis methods of metal elements in rocks

Professional Standard - Machinery, ion mass spectrometry

  • JB/T 6018-1992 Specifications for split flow centrifugal oil filter rotor assembly

Professional Standard - Non-ferrous Metal, ion mass spectrometry

  • YS/T 1601-2023 etermination of impurity content in hexachlorodisilane—Inductively coupled plasma mass spectrometry
  • YS/T 980-2014 Determination of impurities of high purity gallium oxide.Inductively coupled plasma-mass spectrmetry
  • YS/T 473-2015 Methods for chemical analysis industrial gallium.Determination of impurity elements.ICP-MS analytical method
  • YS/T 473-2005 Determination of impurity elements in gallium for industrial use-ICP-MS analytical method
  • YS/T 742-2010 Methods for chemical analysis of gallium oxide Determination of impurities Inductively coupled plasma mass spectrometer method
  • YS/T 870-2013 Chemical analysis of high purity aluminium.Determination of trace impurities.Inductively coupled plasma mass spectrometry
  • YS/T 896-2013 Methods for chemical analysis of high purity niobium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
  • YS/T 892-2013 Methods for chemical analysis of high purity titanium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
  • YS/T 898-2013 Methods for chemical analysis of the high purity tantalum.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
  • YS/T 900-2013 Methods for chemical analysis of the high purity tungsten.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry

AT-ON, ion mass spectrometry

  • ONORM M 6253 Teil.1-1985 Water analysis; determination ofanionic Surfactants by the methylene blue spectrometric method
  • OENORM EN ISO 22818:2021 Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (I
  • ONORM M 6279-1991 Water analysis — Determination oj 33 elements by inductively coupled plasma emission spectrometry (ICP-AES)

Lithuanian Standards Office , ion mass spectrometry

  • LST EN ISO 15061:2002 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions (ISO 15061:2001)
  • LST EN 13273-2002 Surface active agents - Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC)
  • LST EN ISO 22818:2021 Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (I
  • LST EN 62321-4-2014 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS (IEC 62321-4:2013)
  • LST EN ISO 17294-1:2007 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004)

AENOR, ion mass spectrometry

  • UNE-EN ISO 15061:2002 Water quality - Determination of dissolved bromate - Method by liquid chromatography of ions. (ISO 15061:2001)
  • UNE-EN ISO 12010:2014 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in water - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) (ISO 12010:2012)
  • UNE 77226:1999 STATIONARY SOURCE EMISSIONS. DETERMINATION OF MASS CONCENTRATION OF SULFUR DIOXIDE. ION CHROMATOGRAPHY METHOD.

Jilin Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB22/T 1531-2011 Determination of copper, lead and cadmium in ginseng by inductively coupled plasma mass spectrometry
  • DB22/T 2465-2016 Determination of triazotin and fenbutyltin residues in water by liquid chromatography-inductively coupled plasma mass spectrometry
  • DB22/T 1687-2012 Determination of Arsenic, Cadmium, Lead, Chromium and Mercury in Fertilizers by Inductively Coupled Plasma Mass Spectrometry
  • DB22/T 1983-2013 Determination of Arsenic, Lead, Mercury and Cadmium in Food Additives by Inductively Coupled Plasma Mass Spectrometry

Professional Standard - Hygiene , ion mass spectrometry

  • WS/T 107.2-2015 Determination of iodine in urine part 2: inductively coupled plasma mass spectrometry

卫生健康委员会, ion mass spectrometry

  • WS/T 783-2021 Standard method for determination of iodine in blood using inductively coupled plasma mass spectrometry
  • WS/T 107.2-2016 Determination of iodine in urine Part 2: Inductively coupled plasma mass spectrometry

国家药监局, ion mass spectrometry

  • YY/T 1675-2019 Serum Electrolytes (Potassium, Sodium, Calcium, Magnesium) Reference Measurement Procedure (Ion Chromatography)

Zhejiang Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB33/T 543-2005 Method for Determination of Multi-residue Pesticides in Fruits and Vegetables by Gas Chromatography Ion Trap Mass Spectrometry

海关总署, ion mass spectrometry

  • SN/T 5141-2019 Determination of mercury speciation in foods for export by liquid chromatography-inductively coupled plasma mass spectrometry
  • SN/T 5306-2021 Determination of lead, arsenic, mercury, antimony and copper in naphtha by inductively coupled plasma mass spectrometry
  • SN/T 5242-2020 Determination of Germanium Content in Imported and Exported Textiles by Inductively Coupled Plasma Mass Spectrometry

VN-TCVN, ion mass spectrometry

  • TCVN 6750-2000 Stationary source emissions.Determination of mass concentration of sulfur dioxide.Ion chromatography method

Fujian Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB35/T 1736-2018 Determination of Rare Earth Elements in Soil by Inductively Coupled Plasma Mass Spectrometry
  • DB35/T 1486-2014 Determination of Rare Earth Elements in Seawater by Inductively Coupled Plasma Mass Spectrometry
  • DB35/T 1142-2011 Determination of Arsenic, Lead, Copper, Zinc, Cadmium, Chromium, Nickel in Soil by Inductively Coupled Plasma Mass Spectrometry

National Health Commission of the People's Republic of China, ion mass spectrometry

  • GBZ/T 317.2-2018 Determination of cadmium in blood part 2: inductively coupled plasma mass spectrometry
  • GBZ/T 307.2-2018 Determination of Cadmium in Urine Part 2: Inductively Coupled Plasma Mass Spectrometry
  • GBZ/T 316.2-2018 Determination of Lead in Blood Part 2: Inductively Coupled Plasma Mass Spectrometry
  • GBZ/T 308-2018 Simultaneous Determination of Multiple Metals in Urine by Inductively Coupled Plasma Mass Spectrometry

国家林业和草原局, ion mass spectrometry

  • LY/T 3013-2018 Determination of chloride and sulfate in wood activated carbon by ion chromatography

ES-AENOR, ion mass spectrometry

Xinjiang Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB65/T 3974-2017 Determination of Heavy Metal Elements in Soil by Inductively Coupled Plasma Mass Spectrometry
  • DB65/T 3950-2016 Water quality-Determination of anionic surfactants in water-Flow Injection-Spectrophotometric method
  • DB65/T 3971-2017 Simultaneous Determination of Multiple Heavy Metals in Vegetables and Fruits by Plasma Mass Spectrometry

Tianjin Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB12/T 1022-2020 Determination of Available Boron Content in Soil by Inductively Coupled Plasma Mass Spectrometry
  • DB12/T 1024-2020 Determination of mercury, arsenic, cadmium, lead and chromium in water-soluble fertilizers by inductively coupled plasma mass spectrometry
  • DB12/T 848-2018 Determination of lead, cadmium, chromium, arsenic, mercury in organic fertilizers by inductively coupled plasma mass spectrometry

国家质量监督检验检疫总局, ion mass spectrometry

  • SN/T 2263-2017 Determination of arsenic, bromine and iodine in coal or coke by inductively coupled plasma mass spectrometry
  • SN/T 4666-2016 Determination of hexavalent chromium in imported and exported textiles by high performance liquid chromatography-inductively coupled plasma mass spectrometry
  • SN/T 4678-2016 Determination method of uranium and thorium in exported foods by inductively coupled plasma mass spectrometry
  • SN/T 3850.1-2014 Determination of various sugar alcohol sweeteners in exported foods Part 1: Liquid chromatography-tandem mass spectrometry and ion chromatography
  • SN/T 4377-2015 Determination of impurity elements in copper and copper alloy scraps by inductively coupled plasma atomic emission spectrometry
  • SN/T 4675.20-2016 Determination of rare earth elements in exported wines by inductively coupled plasma mass spectrometry

Yunnan Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB53/T 501-2013 Inductively Coupled Plasma Mass Spectrometry for Determination of Trichlorosilane Impurity Element Content in Polysilicon
  • DB53/T 510-2013 Determination of copper, zinc, arsenic, lead, cadmium, chromium, nickel in tobacco seed coating agent by inductively coupled plasma mass spectrometry
  • DB53/T 424-2012 Determination of lead, cadmium, arsenic, copper and chromium in Yunyan extract by inductively coupled plasma mass spectrometry

Anhui Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB34/T 2824-2017 Determination of four arsenic species in Chinese herbal medicines by high performance liquid chromatography-inductively coupled plasma mass spectrometry
  • DB34/T 3803-2021 Determination of trace elements uranium and thorium in coal by inductively coupled plasma mass spectrometry

Guangxi Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB45/T 1487-2017 Determination of Rare Earth Elements in Compound Fertilizers by Inductively Coupled Plasma Mass Spectrometry
  • DB45/T 866-2012 Determination of Aluminum in Plant Chinese Medicinal Materials by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)

Inner Mongolia Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB15/T 1243-2017 Determination of Impurity Content in Resins by Inductively Coupled Plasma Emission Spectrometry

Professional Standard - Textile, ion mass spectrometry

  • FZ/T 01165-2022 Screening of Textile Organotin Compounds by Inductively Coupled Plasma Mass Spectrometry

农业农村部, ion mass spectrometry

  • NY/T 3834-2021 Determination of 16 rare earth elements in fertilizers by inductively coupled plasma mass spectrometry

GOSTR, ion mass spectrometry

  • PNST 499-2020 Nanotechnologies. Сarbon nanotubes. Determination of chemical element impurities by inductively coupled plasma mass spectrometry method
  • GOST 34462-2018 Food products, food raw materials, feed. Determination of inorganic arsenic by high-performance liquid chromatography-mass spectrometry with inductively coupled plasma
  • GOST 34141-2017 Food products, feed, food raw. Determination of arsenic, cadmium, mercury and lead by the method of inductively coupled plasma-mass spectrometry

CU-NC, ion mass spectrometry

  • NC 61-47-1987 Telecommunications . Whip Type Antenna for 146 MHz to 17 4 MHz Band. Quality Specifications

CH-SNV, ion mass spectrometry

  • SN EN ISO 22818:2021 Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (I

IT-UNI, ion mass spectrometry

  • UNI EN ISO 22818:2021 Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS)

PL-PKN, ion mass spectrometry

  • PN-EN ISO 22818-2021-08 E Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (I

Professional Standard - Building Materials, ion mass spectrometry

  • JC/T 2027-2010 Determination of impurities in high purity quartz.Inductively coupled plasma atomic emission spectrometry

Jiangsu Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB32/T 4057-2021 Determination of 18 elements such as copper and cadmium in poultry meat by inductively coupled plasma mass spectrometry
  • DB32/T 4032-2021 Determination of lithium, niobium, tin, bismuth in soil and sediments by inductively coupled plasma mass spectrometry

Hunan Provincial Standard of the People's Republic of China, ion mass spectrometry

  • DB43/T 1220-2016 Determination of copper, zinc, lead, cadmium, chromium, mercury and arsenic in soil by inductively coupled plasma-mass spectrometry




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved