ZH
RU
ES
Measuring holes
Measuring holes, Total:66 items.
In the international standard classification, Measuring holes involves: Earth-moving machinery, Shipbuilding and marine structures in general, Linear and angular measurements, Mechanical testing, Valves, Powder metallurgy, Aerosol containers, Rubber and plastics products, Ground service and maintenance equipment, Cellular materials, Non-ferrous metals, Ferroalloys, Products of the chemical industry, Fluid storage devices, Protection against dangerous goods, Fasteners, Paper and board, Mining equipment, Energy and heat transfer engineering in general, Optics and optical measurements, Surface treatment and coating, Earthworks. Excavations. Foundation construction. Underground works, Protection of and in buildings.
International Organization for Standardization (ISO), Measuring holes
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Measuring holes
- GB/T 14289-1993 Earth-moving machinery. Diagnostic ports
- GB/T 2134-1980 Determination of antimony content in cadmium--Malachite green photometric method
- GB/T 5059.2-2014 Ferromolybdenum.Determination of antimony content.Malachite green spectrophotometric method
- GB/T 1825-1979 Determination of antimony content in tin concentrates--Malachite green photometric method
- GB/T 31310-2014(英文版) Metallic materials—Determination of residual stress—Hole drilling straingage method
Japanese Industrial Standards Committee (JISC), Measuring holes
IPC - Association Connecting Electronics Industries, Measuring holes
AT-ON, Measuring holes
- ONORM M 1346-1-1995 Control of measuring and test equipment - Testing Instruction for plug gauges
- ONORM A 5504-1988 Packaging testing; puncture test for board and corrugated fibreboard
Taiwan Provincial Standard of the People's Republic of China, Measuring holes
- CNS 11412-1995 Cut-out Cocks with Side Vent for Railway Rolling Stock
- CNS 6868-1980 Method of Test for Pressure in Metal Aerosol Containers: Can - Piercing Method
- CNS 14810-2004 Methods of test for holiday detection in pipeline coatings
CZ-CSN, Measuring holes
Korean Agency for Technology and Standards (KATS), Measuring holes
BR-ABNT, Measuring holes
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Measuring holes
Society of Automotive Engineers (SAE), Measuring holes
BE-NBN, Measuring holes
Association Francaise de Normalisation, Measuring holes
- NF G38-017:1989 TEXTILES. ARTICLES FOR INDUSTRIAL USES. TESTS FOR GEOTEXTILES. MEASUREMENT OF PORE SIZE. DETERMINATION OF FILTRATION OPENING.
- XP P94-123:1999 Sols : reconnaissance et essais - Diagraphie dans les sondages - Méthode de la sonde à neutrons
- NF T54-116:1973 Plastic. Sheets. Determination of resistance to perforation. Perforametre method.
- NF T81-123:1979 Transportation equipment. Road tankers for liquified pressure gas. Holes for gauging, degassing and testing.
British Standards Institution (BSI), Measuring holes
- BS EN 24003:1993 Permeable sintered metal materials. Determination of bubble test pore size
- BS EN ISO 18674-4:2020 Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation - Measurement of pore water pressure: Piezometers
- BS EN ISO 22476-14:2020 Geotechnical investigation and testing. Field testing - Borehole dynamic probing
GOSTR, Measuring holes
RO-ASRO, Measuring holes
American Society for Testing and Materials (ASTM), Measuring holes
- ASTM UOP578-02 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
- ASTM UOP578-11 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
Professional Standard - Aviation, Measuring holes
YU-JUS, Measuring holes
Standard Association of Australia （SAA）, Measuring holes
- AS 2282.5:1999 Methods for testing flexible cellular polyurethane - Determination of cell count
AENOR, Measuring holes
- UNE-EN 24003:2002 PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF BUBBLE TEST PORE SIZE. (ISO 4003:1977)
- UNE-EN 12728:2000 SURFACE ACTIVE AGENTS - DETERMINATION OF FOAMING POWER - PERFORATED DISC BEATING METHOD
HU-MSZT, Measuring holes
National Metrological Technical Specifications of the People's Republic of China, Measuring holes
RU-GOST R, Measuring holes
Professional Standard - Non-ferrous Metal, Measuring holes
- YS/T 226.2-1994 Determination of antimony content in selenium (malachite green absorptiometry)
German Institute for Standardization, Measuring holes
- DIN ISO 4003:1990-10 Permeable sintered metal materials; determination of bubble test pore size; identical with ISO 4003:1977
Danish Standards Foundation, Measuring holes
- DS/EN 12728:2001 Surface active agents - Determination of foaming power - Perforated disc beating method
- DS/EN 120:1985 Formaldehyde determination on particle boards. Perforator method
Lithuanian Standards Office , Measuring holes
- LST EN 12728-2002 Surface active agents - Determination of foaming power - Perforated disc beating method
National Metrological Verification Regulations of the People's Republic of China, Measuring holes
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Measuring holes
Professional Standard - Ferrous Metallurgy, Measuring holes
- YB/T 5046-2012 Molybdenum oxide.Determination of antimony.Spectrophotometric method of malachite green
SE-SIS, Measuring holes
Professional Standard - Earthquake, Measuring holes
- DB/T 54-2013 The method of earthquake-related crustal deformation monitoring.Strain monitoring in borehole
Group Standards of the People's Republic of China, Measuring holes