ZH
RU
ES

small tempering furnace

small tempering furnace, Total:365 items.

In the international standard classification, small tempering furnace involves: Shipbuilding and marine structures in general, Small craft, Fluid storage devices, Kitchen equipment, Burners. Boilers, Gas and steam turbines. Steam engines, Wastes, Heat treatment, Refractories, Materials for aerospace construction, Coals, Installations in buildings, Domestic, commercial and industrial heating appliances, Protection against fire, Test conditions and procedures in general, Pipeline components and pipelines, Internal combustion engines, Welding, brazing and soldering, Power stations in general, Environmental protection, Elements of buildings, Electrical wires and cables, Products of non-ferrous metals, Miscellaneous domestic and commercial equipment, Air quality, Paints and varnishes, Iron and steel products, Cellular materials, Fasteners, Fuels, Plastics, Rubber and plastics products.

JP-JCS, small tempering furnace

JCS 7502-2009 Fire proof test methods with small-type furnace for cables
JCS 7505-2007 Fire proof test methods with small-type furnace for cable joints
JCS 7503-2009 Fire proof test methodes with large-type furmace for cables

British Standards Institution (BSI), small tempering furnace

BS ISO 13592:1998 Small craft - Backfire flame control for petrol engines
BS EN ISO 9094:2015 Small craft. Fire protection
BS EN ISO 9094:2017 Small craft. Fire protection
BS 5871-1:2005 Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances - Gas fires, convector heaters, fire/back boilers and heating stoves (2nd and 3rd family gases)
BS 7327-1:1990 Small fixed fire extinguishers - Specification for small fixed halon fire extinguishers
BS ISO TR 9122-4:1993 Toxicity testing of fire effluents - The fire model (furnaces and combustion apparatus used in small-scale testing)
BS 5871-2:2005 Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances — Part 2: Inset live fuel effect gas fires of heat input not exceeding 15 kW, and fire/back boilers (
BS EN ISO 7840:2013 Small craft. Fire-resistant fuel hoses
BS EN ISO 7840:2021 Small craft. Fire-resistant fuel hoses
BS 6165:2019+A1:2022 Small, single-use, fire extinguishers. Specification
BS 6165:2002 Specification for small disposable fire extinguishers of the aerosol type
BS EN ISO 8469:2013 Small craft. Non-fire-resistant fuel hoses
BS EN ISO 9094-2:2003 Small craft. Fire protection. Craft with a hull length of over 15 m
BS EN 2030:2013 Aerospace series. Steel X105CrMo17 (1.3544). Hardened and tempered. Bars. De 150 mm
BS EN 15420:2010 Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW
22/30453509 DC BS 6165:2019+A1:2022 Specification for small, single-use, fire extinguishers
20/30400691 DC BS EN ISO 7840. Small craft. Fire-resistant fuel hoses
BS EN 15270:2007 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
20/30400694 DC BS EN ISO 8469. Small craft. Non-fire-resistant fuel hoses
BS EN 2226:2014 Aerospace series. Steel X105CrMo17 (1.4125). Hardened and tempered. Hand and die forgings. De 150 mm
BS EN 3507:2007 Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De 100 mm - 930 MPa Rm 1080 MPa
BS EN 3507:2006 Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa
BS EN 4098:2007 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings De 50 mm, 1250 MPa Rm 1400 MPa
BS EN 4629:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De 300 mm
BS EN 3491:2007 Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De 100 mm - 900 MPa Rm 1100 MPa
BS EN 3491:2006 Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De u 100 mm - 900 MPa u Rm u 1 100 MPa
BS EN 4628:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De 150 mm - 1100 MPa Rm 1300 MPa
BS EN 4630:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De 200 mm - 900 MPa Rm 1050 MPa
BS EN 4628:2008 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De 150 mm. 1100 MPa Rm 1300 MPa
BS EN 4630:2008 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De 200 mm. 900 MPa Rm 1050 MPa
BS EN 4627:2014 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De 200 mm. 1 150 MPa Rm 1 300 MPa
BS EN 4630:2014 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De 200 mm. 900 MPa Rm 1 050 MPa
BS EN 50200:2006 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
BS EN 3526:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm a 6 mm - 980 MPa Rm 1180 MPa
BS EN 4628:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De 200 mm. 1150 MPa Rm 1300 MPa
BS EN 3972:2007 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De 50 mm - 1250 MPa Rm 1400 MPa
BS EN 3972:2006 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa

Taiwan Provincial Standard of the People's Republic of China, small tempering furnace

CNS 10897-2006 Miniature boiler
CNS 10897-1984 Code for Miniature Boiler Manufacture

Association Francaise de Normalisation, small tempering furnace

NF J95-038*NF ISO 13592:1998 Small craft. Backfire flame control for petrol engines.
NF L10-592*NF EN 2213:2012 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bars - De < or = 16 mm - 980 MPa < or = Rm < or = 1 180 MPa
NF EN ISO 14895:2016 Petits navires - Réchauds de cuisine et appareils de chauffage alimentés par un combustible liquide
NF J95-029:2013 Small craft - Non-fire-resistant fuel hoses
NF L11-213*NF EN 2221:2017 Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm less than or equal to a than or equal 55 mm
NF L10-593*NF EN 2030:2014 Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De < or = 150 mm
NF EN ISO 8099-2:2021 Petits navires - Circuits d'eaux usées - Partie 2 : traitement des eaux usées
NF EN ISO 7840:2021 Petits navires - Tuyaux souples pour carburant résistants au feu
NF D35-348*NF EN 13836:2006 Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW
NF L10-724*NF EN 2475:2018 Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De less than or equal to 100 mm - 1 100 MPa less than or equal to Rm less than or equal to 1 300 MPa
NF EN 15270:2008 Brûleurs à granulés pour petites chaudières de chauffage - Définitions, exigences, essais, marquage
NF EN 2475:2018 Série aérospatiale - Acier 30CrNiMo8 (1.6580) - Élaboré à l'air - Durci par trempe et revenu - Barre pour usinage - De inférieur ou égal à 100 mm - 1 100 MPa inférieur ou égal à Rm inférieur ou égal à 1 300 MPa
NF E31-359*NF EN 15270:2008 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
NF L17-303-2:2012 Aerospace series - Flammability of non metallic materials - Part 2 : small burner test, horizontal - Determination of the horizontal flame propagation.
NF L11-036*NF EN 4825:2021 Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - De less than or equal to 150 mm - 900 MPa less than or equal to Rm less than or equal to 1 100 MPa
NF L10-546:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De < or = 300 mm.
NF L10-507*NF EN 3507:2007 Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De inferior or equal to 100 mm - 930 MPa inferior or equal to Rm inferior or equal to 1 080 MPa.
NF L10-544*NF EN 4098:2008 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings De < or = 50 mm, 1250 MPa < or = Rm < or = 1400 MPa.
NF L17-303-1:2012 Aerospace series - Flammability of non metallic materials - Part 1 : small burner test, vertical - Determination of the vertical flame propagation.
NF EN 656:2000 Chaudières de chauffage central utilisant les combustibles gazeux - Chaudières de type B dont le débit calorifique nominal est supérieur à 70 kW mais inférieur ou égal à 300 kW
NF EN 656/A1:2006 Chaudières de chauffage central utilisant les combustibles gazeux - Chaudières de type B dont le débit calorifique nominal est supérieur à 70 kW mais inférieur ou égal à 300 kW
NF L10-549:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De < or = 200 mm - 900 MPa < or = Rm < or = 1 050 Mpa.
NF L10-508*NF EN 3491:2007 Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De < or = 100 mm - 900 MPa < or = Rm < or = 1 100 MPa.
NF L10-549*NF EN 4630:2015 Aerospace series - Steel X4CrNiMo 16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De < or = 200 mm - 900 MPa < or = Rm < or = 1 050 MPa
NF EN 13836:2006 Chaudières de chauffage central utilisant les combustibles gazeux - Chaudières de type B dont le débit calorifique nominal est supérieur à 300 kW mais inférieur ou égal à 1000 kW
NF L10-545:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De < or = 150 mm - 1 100 MPa < or = Rm < or = 1 300 MPa.
NF L10-548:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De < or = 200 mm - 900 MPa < or = Rm < or = 1 050 MPa.
NF L10-504*NF EN 3523:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De < or = 100 mm - 1 080 MPa < or = Rm < or = 1 280 MPa
NF EN 2469:2007 Série aérospatiale - Acier FE-PA3901 (X1CrNi18-10) - Élaboré à l'air - Trempé - Fils - 0,4 mm inférieur ou égal à D inférieur ou égal à 12,5 mm - 450 Mpa inférieur ou ègal à Rm inférieur ou égal à 650 MPa
NF L10-547:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De < or = 150 mm - 1 100 MPa < or = Rm < or = 1 300 MPa.
NF L10-506*NF EN 3490:2007 Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De < or = 200 mm - 900 MPa < or = Rm < or = 1 100 Mpa
NF L10-545*NF EN 4628:2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De < or = 200 mm - 1 150 MPa < or = Rm < or = 1 300 MPa
NF L10-548*NF EN 4631:2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De < or = 200 mm - 900 MPa < or = Rm < or = 1 050 MPa
NF EN 10263-4:2017 Barres, fil machine et fils en acier pour transformation à froid et extrusion à froid - Partie 4 : conditions techniques de livraison des aciers pour trempe et revenu
NF EN 50200:2016 Méthode d'essai de la résistance au feu des câbles de petites dimensions sans protection pour utilisation dans les circuits de secours
NF EN 3315:2018 Série aérospatiale - Alliage de titane TI-P64001 - Mis en solution et revenu - Pièces forgées et pièces matricées - De inférieur ou égal à 75 mm
NF L10-513*NF EN 3526:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm < or = a < or = 6 mm - 980 MPa < or = Rm < or = 1 180 MPa
NF L10-512*NF EN 3524:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm < or = a < or = 6 mm - 1 080 MPa < or = Rm < or = 1 280 MPa
NF C32-071:1985 Test electric cables under fire conditions Guide Stating the Method for Checking Small single Insulated Cores of the Category C2
NF A49-901-1:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1 : quenched and tempered steel cylinders with tensile strength less than 1 100 MPa.

Professional Standard - Environmental Protection, small tempering furnace

HJ/T 18-1996 Small-sized incinerators
HJ/T 287-2006 Specifications of environmental protection product Middle little style oil-burning gas-buring boiler

International Organization for Standardization (ISO), small tempering furnace

ISO 13592:1998 Small craft - Backfire flame control for petrol engines
ISO 7840:2013 Small craft - Fire-resistant fuel hoses
ISO 7840:2021 Small craft - Fire-resistant fuel hoses
ISO/TR 9122-4:1993 Toxicity testing of fire effluents; part 4: the fire model (furnaces and combustion apparatus used in small-scale testing)
ISO 8469:2013 Small craft - Non-fire-resistant fuel hoses
ISO 8469:2021 Small craft - Non-fire-resistant fuel hoses
ISO 4736:1979 Fire tests; Small chimneys; Testing at elevated temperatures
ISO/CD 8846:2023 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases
ISO/TR 15658:2009 Fire resistance tests - Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation

American Society for Testing and Materials (ASTM), small tempering furnace

ASTM F3216-16 Standard Test Method for Performance of Retherm Ovens
ASTM B609/B609M-99(2004) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B609/B609M-12 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM A852/A852M-01 Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
ASTM A852/A852M-00a Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
ASTM A852/A852M-03(2007) Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
ASTM A913/A913M-07 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
ASTM C622-84(1995) Standard Test Method for Corrosion Resistance of Refractories to Molten Glass Using the Basin Furnace (Withdrawn 2000)
ASTM A913/A913M-11 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process
ASTM A913/A913M-14 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process 40;QST41;
ASTM A913/A913M-14a Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process 40;QST41;
ASTM A913/A913M-15 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
ASTM A852/A852M-03 Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
ASTM D7525-14 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test &40;RSSOT&41;
ASTM D3806-19 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
ASTM D3806-98(2016) Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
ASTM D3806-19a Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)

RO-ASRO, small tempering furnace

STAS 6479/1-1985 REFRACTORY PRODUCTS Code ol practice for reprocessing fur- naces ol mining industry
STAS 4604-1965
STAS 4473-1966
STAS 8678/4-1986 TOGGLE LEER ASSISTED END CUVTTING NIPPER TYPE II Shapes and dimensions

KR-KS, small tempering furnace

KS V ISO 13592-2013(2023) Small craft－Backfire flame control for petrol engines
KS M ISO 9772-2018 Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

Indonesia Standards, small tempering furnace

SNI 05-6702-2002 Requirements for small steam boilers

Professional Standard - Machinery, small tempering furnace

JB/T 10192-2000 Specification for small-sized incinerator
JB/T 10192-2012 Specification for small-sized incinerator
JB/T 7985-2002 Specification for small type boilers and atmospheric hot water boilers
JB/T 7985-1995 Specification for small type boilers and atmospheric hot water boilers
JB/T 6230-1992 Small electrothermal electrode drying ovens. Technical specification
JB/T 11652-2013 Technical specification for recoil startor of general small gasoline engine

国家市场监督管理总局、中国国家标准化管理委员会, small tempering furnace

GB/T 37464-2019 Hardening and tempering of heavy steel forgings

CZ-CSN, small tempering furnace

CSN ON 72 6347-1967
CSN ON 72 6314-1966
CSN ON 72 6315-1966
CSN 26 7408-1995 Safety regulations for small automatic storage and retrieval equipment
CSN ON 72 6313-1968
CSN 13 5340-1989 Valves for power engineering. Check valves for thermal power plants. Types and basic parametrs

国家能源局, small tempering furnace

NB/T 10941-2022 Technical conditions for small boilers and normal pressure hot water boilers
NB/T 10552-2021 Technical conditions for small clean coal-fired water heaters
NB/T 34036-2016 Test methods for small biomass boilers
NB/T 34036-2020 Test methods for small biomass boilers
NB/T 34035-2016 Technical conditions for small biomass boilers
NB/T 34035-2020 Technical conditions for small biomass boilers
NB/T 34041-2017 Test methods for small biomass hot blast stoves
NB/T 34040-2017 Technical conditions of small biomass hot blast furnace

Korean Agency for Technology and Standards (KATS), small tempering furnace

KS L 3103-1984(1999) SHAPE AND DIMENSION OF FIRE BRICK FOR CUPOLA
KS L 3103-1984 SHAPE AND DIMENSION OF FIRE BRICK FOR CUPOLA
KS B 8903-2012 Pellet combustion device for small heating boilers
KS B 8903-2017(2022) Pellet combustion device for small heating boilers
KS V ISO 7840:2013 Small craft-Fire-resistant fuel hoses
KS B 7371-2001 Small size water cooled spark ignition engines for land use
KS V ISO 13592:2013 Small craft－Backfire flame control for petrol engines
KS B 7381-2013 Small sized forced air-cooled spark ignition engines for land use
KS V ISO 8469:2013 Small craft－Non-fire-resistant fuel hoses
KS B 7381-2006(2011) Small sized forced air-cooled spark ignition engines for land use
KS M ISO 9772:2018 Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
KS F ISO TR 9122-4-2004(2014) Toxicity testing of fire effluents－Part 4：The fire model (furanaces and combustion apparatus used in small-scale testing)
KS M ISO 9772:2011 Cellular plastics-Determination of horizontal burning characteristics of small specimens subjected to a small flame
KS M ISO 9772:2013 Cellular plastics ㅡ Determination of horizontal burning characteristics of small specimens subjected to a small flame
KS V ISO 9094-2:2004 Small craft-Fire protection-Part 2:Craft with a hull length of over 15 m
KS V ISO 9094-1:2004 Small craft-Fire protection-Part 1:Craft with a hull length of up to and including 15 m
KS V ISO 9094-2:2014 Small craft — Fire protection — Part 2: Craft with a hull length of over 15 m
KS V ISO 9094-1:2014 Small craft — Fire protection — Part 1: Craft with a hull length of up to and including 15 m
KS B ISO 9809-1-2016(2021) Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa

Society of Automotive Engineers (SAE), small tempering furnace

SAE AMS5372C-1984 Castings-Sand, 16Cr 1.9Ni, Normalized and Tempered
SAE AMS5372C-2000 Steel Castings, Sand, Corrosion Resistant 16Cr - 1.9Ni (Type 431 Mod) Normalized and Tempered
SAE AMS5372B-1991 STEEL CASTINGS, SAND, CORROSION RESISTANT 16Cr - 1.9Ni (Type 431 Mod) Normalized and Tempered
SAE J607A-1974 SMALL SPARK IGNITION ENGINE TEST CODE
SAE AMS5335E-1984 Castings-Sand, 0.65Cr 0.75Ni 0.20Mo (0.25-0.33C) Normalized and Tempered
SAE AMS4602E-2022 Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (H04)
SAE AMS5331D-1982 STEEL CASTINGS, SAND 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340) Normalized and Tempered
SAE AMS5331E-2011 STEEL CASTINGS, SAND 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340) Normalized and Tempered
SAE AMS4602D-2017 Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (HO4)
SAE AMS7304B-1971 SPRINGS, STEEL 0.85 - 1.05C Hardened and Tempered after Forming
SAE AMS7304E-2011 Springs, Steel 0.85 - 1.05C Hardened and Tempered After Forming
SAE AMS7304C-1979 SPRINGS, STEEL 0.85 - 1.05C Hardened and Tempered after Forming
SAE AMS7304D-1994 SPRINGS, STEEL 0.85 - 1.05C Hardened and Tempered After Forming
SAE AMS4602C-1995 COPPER BARS, RODS, AND SHAPES Oxygen-Free, Hard Temper (HO4)
SAE AMS7304F-2015 Springs, Steel 0.85 - 1.05C Hardened and Tempered After Forming
SAE AMS5335D-2001 STEEL CASTINGS, SAND 0.65Cr - 0.75Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630 Modified) Normalized and Tempered
SAE AMS4602D-2003 Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (HO4)
SAE AMS4602A-1979 COPPER BARS, RODS, AND SHAPES Oxygen-Free, Hard Temper (CDA 102)
SAE AMS7304E-2001 Springs, Steel, 0.85 1.05C, Hardened and Tempered After Forming
SAE AMS4881C-2011 Nickel-Aluminum-Bronze, Martensitic, Sand and Centrifugal Castings 78Cu - 11Al - 5.1Ni - 4.8Fe Quench Hardened and Temper Annealed
SAE AMS4011D-2009 Aluminum, Foil and Light Gage Sheet 99.45Al (1145-0) Annealed
SAE AMS5351F-1987 Steel Castings, Sand, Corrosion and Moderate Heat Resistant 13Cr Normalized and Tempered
SAE AMS4873F-2005 Aluminum Bronze Alloy, Sand Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered Composition similar to UNS C95420
SAE AS915-2002 Conductivity Standard - Eddy Current: Type of Aluminum Alloy Temper Testing Equipment
SAE AMS4873D-1995 ALUMINUM BRONZE CASTINGS, SAND 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered
SAE J335-2012 Multiposition Small Engine Exhaust System Fire Ignition suppression
SAE J335B-1976 MULTIPOSITION SMALL ENGINE EXHAUST SYSTEM FIRE IGNITION SUPPRESSION
SAE AMS4873F-2016 Aluminum Bronze Alloy, Sand Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered
SAE AMS4873E-1998 (R) Aluminum Bronze Alloy, Sand Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered UNS C95420
SAE AMS4640G-2005 Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50) Composition similar to UNS C63000
SAE AMS4640H-2018 Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50)

U.S. Military Regulations and Norms, small tempering furnace

ARMY MIL-C-44082 A-1990 CASE, SMALL ARMS, AMMUNITION, 200-ROUND MAGAZINE
ARMY MIL-B-3060 F-2008 BOXES, SMALL ARMS AMMUNITION ?M19A1 AND M2A1
ARMY MIL-C-43827 D-1990 CASE, SMALL ARMS AMMUNITION, 30-ROUND MAGAZINE (M-16 RIFLE), LC-1
ARMY MIL-C-20109 REINST NOTICE 2-1996 COPPER PRESSURE CYLINDERS AND COPPER PRESSURE SPHERES, CANNON (MAJOR AND MEDIUM), CANNON (MINOR), SMALL ARMS AND PISTOL AND REVOLVER
ARMY MIL-C-20109 (1)-1952 COPPER PRESSURE CYLINDERS AND COPPER PRESSURE SPHERES, CANNON (MAJOR AND MEDIUM), CANNON (MINOR), SMALL ARMS AND PISTOL AND REVOLVER
ARMY MIL-C-20109-1951 COPPER PRESSURE CYLINDERS AND COPPER PRESSURE SPHERES, CANNON (MAJOR AND MEDIUM), CANNON (MINOR), SMALL ARMS AND PISTOL AND REVOLVER
ARMY QPL-684-18 NOTICE 2-2008 Cups, Bullet Jacket, Copper Alloy Clad Steel, for Small Arms Ammunition

American Society of Mechanical Engineers (ASME), small tempering furnace

ASME SEC I PT PMB-2002 Part PMB Requirements for Miniature Boilers
ASME 2344-2001 Use of Sand Cast Aluminum Alloy A356.0, T6 Temper, for the Manufacture of Hot Water Heating Boilers Under Part HC Section IV
ASME 2382-1-2001 Use of Sand Case Aluminum Alloy EN AC-AlSi10Mg(a), F Temper, in the Manufacture of Hot Water Heating Boilers Under Part HC Section IV; SUPP 8&9
ASME 1896-2-2001 Miniature Electric Boilers Fabricated of Austenitic Stainless Steel Section I ANNULLED
ASME 2172-2001 Use of B 43 Seamless Red Brass Pipe (UNS C23000) with Drawn General Purpose Temper (H58) for Threaded Piping for Construction of PMB and PEB Miniature Electric Boilers Section I

Group Standards of the People's Republic of China, small tempering furnace

T/CAQI 200-2021 Small-scale clean biomass heating stoves
T/GDASE 0032-2022 Specifications for measurement of low-capacity steam boiler water volume
T/CIECCPA 018-2023 Energy efficiency test method of small capacity electric heating boiler and its system
T/ZZB 1706-2020 Magneto digital igniter for general utility small gasoline engine

SAE - SAE International, small tempering furnace

SAE AMS5372C-1994 Steel Castings@ Sand@ Corrosion Resistant 16Cr - 1.9Ni (Type 431 Mod) Normalized and Tempered
SAE J607-1984 Small Spark Ignition Engine Test Code
SAE AMS7304D-1988 Springs@ Steel 0.85 - 1.05C Hardened and Tempered After Forming
SAE AMS5351F-1995 Steel Castings@ Sand@ Corrosion and Moderate Heat Resistant 13Cr Normalized and Tempered
SAE AMS5372D-2007 Steel Castings@ Sand@ Corrosion Resistant 16Cr - 1.9Ni (Type 431 Mod) Normalized and Tempered (UNS J91601)
SAE AMS7440E-2016 Balls@ Steel@ Low-Chromium@ High Carbon Hardened and Tempered (Stabilzed Type)
SAE AMS5351G-2017 Steel Castings@ Sand@ Corrosion and Moderate Heat Resistant 13Cr Normalized and Tempered (UNS J91150)
SAE AMS4881B-1993 Nickel-Aluminum-Bronze@ Martensitic@ Sand and Centrifugal Castings 78Cu - 11Al - 5.1Ni - 4.8Fe Quench Hardened and Temper Annealed (UNS C95520)
SAE J335-1988 Multiposition Small Engine Exhaust System Fire Ignition Suppression
SAE J335-1990 MULTIPOSITION SMALL ENGINE EXHAUST SYSTEM FIRE IGNITION SUPPRESSION
SAE J335-2020 MULTIPOSITION SMALL ENGINE EXHAUST SYSTEM FIRE IGNITION SUPPRESSION

Professional Standard - Ferrous Metallurgy, small tempering furnace

YB 2216-1980 Slide bricks and seat bricks for small heating furnaces
YB/T 5114-1993 Skid bricks and lower blocks for the small heating furnaces determination of silicon carbide

UNKNOWN, small tempering furnace

YB 2216-80

未注明发布机构, small tempering furnace

BS ISO/TR 9122-4:1993(1998) Toxicity testing of fire effluents — Part 4 : The fire model (furnaces and combustion apparatus used in small - scale testing)
DIN EN ISO 9094:2023 Small craft – Fire protection (ISO 9094:2022); German version EN ISO 9094:2022
DIN EN ISO 9094 A100:2017 Small craft – Fire protection (ISO 9094:2015); German version EN ISO 9094:2017; Amendment A100

IN-BIS, small tempering furnace

Japanese Industrial Standards Committee (JISC), small tempering furnace

JIS F 7151:2009 Small craft -- Fire-resistant fuel hoses
JIS B 8015:1977 Small size forced air-cooled spark ignition engines for land use
JIS F 7150:2009 Small craft -- Non-fire-resistant fuel hoses
JIS F 4328:2000 Small craft -- Backfire flame control for petrol engines
JIS F 0811:2002 Small craft -- Electrical devices -- Protection against ignition of surrounding flammable gases

German Institute for Standardization, small tempering furnace

DIN EN ISO 9094:2023-03 Small craft - Fire protection (ISO 9094:2022); German version EN ISO 9094:2022
DIN EN ISO 14895:2003 Small craft - Liquid-fuelled galley stoves (ISO 14895:2000); German version EN ISO 14895:2003
DIN EN ISO 8469:2021-06 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2021); German version EN ISO 8469:2021
DIN 14497:1990 Small fire extinguishing systems; requirements, testing
DIN EN ISO 7840:2021-05 Small craft - Fire-resistant fuel hoses (ISO 7840:2021); German version EN ISO 7840:2021
DIN EN ISO 8469:2006 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2006); English version of DIN EN ISO 8469:2006-10
DIN EN ISO 14895:2016-11 Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016); German version EN ISO 14895:2016
DIN EN 15270:2008-03 Pellet burners for small heating boilers - Definitions, requirements, testing, marking; German version EN 15270:2007
DIN 4102-8:2003 Fire behaviour of building materials and components - Part 8: Small scale test furnace
DIN 4102-8:2003-10 Fire behaviour of building materials and components - Part 8: Small scale test furnace
DIN EN 15270:2008 Pellet burners for small heating boilers - Definitions, requirements, testing, marking; English version of DIN EN 15270:2008-03
DIN EN 4629:2008 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - D<(Index)e> 300 mm; German and English version EN 4629:2007
DIN EN 15420:2011 Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW; German version EN 15420:2010
DIN EN 656/A1:2006 Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW; English version of DIN EN 656/A1:2006-12
DIN EN 28846/A100:2017-12 Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990); German version EN ISO 8846:2017; Amendment A100
DIN 7500-1:2007 Case hardened and tempered thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements
DIN EN 2030:2014 Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De <= 150 mm; German and English version EN 2030:2013
DIN EN 4098:2007 Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings D<(Index)e> ≤ 50 mm, 1250 MPa ≤ R<(Index)m> ≤ 1400 MPa; German and English version EN 4098:2007
DIN EN 3525:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm a 20 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3525:2007
DIN EN ISO 7840:2013 Small craft - Fire-resistant fuel hoses (ISO 7840:2013); German version EN ISO 7840:2013
DIN EN 3523:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De 100 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3523:2007

Shanghai Provincial Standard of the People's Republic of China, small tempering furnace

DB31/ 213-2010 Specification for Small Type Boilers and Atmospheric Hot Water Boilers and Operation Management
DB31/T 213-2020 Technical Requirements and Operation Management of Small Boilers and Atmospheric Hot Water Boilers

US-FCR, small tempering furnace

FCR FED H-08-4 VOL 4-E-FA-1-1988 BASE LOOP FIRE ALARM - SITE PLAN (TYPICAL)
FCR 40 CFR PART 1054-2014 CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT
FCR 40 CFR PART 1054-2015 CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT
FCR 40 CFR PART 1054-2013 CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT

European Committee for Standardization (CEN), small tempering furnace

EN ISO 7840:2002 (Draft)Draft Small Craft - Fire Resistant Fuel Hoses ISO/DIS 7840; ISO 7840: 1994
EN ISO 7840:2021 Small craft - Fire-resistant fuel hoses (ISO 7840:2021)
EN ISO 7840:2013 Small craft - Fire-resistant fuel hoses
EN ISO 8469:2021 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2021)
EN ISO 8469:2013 Small craft - Non-fire-resistant fuel hoses
EN ISO 14895:2003 Small craft - liquid-fuelled galley stoves ISO 14895: 2000
EN 15420:2010 Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW
EN 15270:2007 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
EN 3507:2006 Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De <= 100 mm - 930 MPa <= Rm <= 1080 MPa
EN 3491:2006 Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De <= 100 mm - 900 MPa <= Rm <= 1100 MPa
EN 4630:2007 Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De Less than or equal to 200 mm - 900 MPa Less than or equal to Rm Less than or equal to 1 050 MPa
EN 4631:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De ��200 mm - 900 MPa ��Rm ��1 050 MPa
EN 3526:2007 Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm <= a <= 6 mm - 980 MPa <= Rm <= 1180 MPa

CEN - European Committee for Standardization, small tempering furnace

EN ISO 7840:1995 Small Craft - Fire Resistant Fuel Hoses (Incorporates Amendment A1: 2000)
EN ISO 7840:2018 Small craft - Fire-resistant fuel hoses
EN ISO 8469:2006 Small craft - Non-fire-resistant fuel hoses
EN ISO 8469:1995 Small Craft - Non-Fire-Resistant Fuel Hoses (Incorporates Amendment A1: 2000)

ES-UNE, small tempering furnace

UNE-EN ISO 7840:2021 Small craft - Fire-resistant fuel hoses (ISO 7840:2021)
UNE-EN ISO 8469:2021 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2021)
UNE-EN 301484-3 V1.1.1:2021 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2021)

Guangdong Provincial Standard of the People's Republic of China, small tempering furnace

DB44/T 1135-2013 Requirements for recycling and disposal of waste small secondary batteries
DB44/T 1370-2014 Requirements for waste recycling and treatment in the manufacturing process of small secondary batteries

HU-MSZT, small tempering furnace

MNOSZ 21784-1953

Fujian Provincial Standard of the People's Republic of China, small tempering furnace

DB35/T 1137-2011 Code for safety management of small steam-water dual-purpose boiler room

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, small tempering furnace

GB/T 26126-2010 Specification of pulverized coal for small and medium-sized industrial boilers
GB 50049-1994 Code for design of small-size power plant
GB 50049-2011 Code for design of small fossil fired power plant
GB/T 5099.1-2017 Seamless steel gas cylinders.Part 1:Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
GB/T 15442.4-1995 Classification Test methods for fire retardancy of finishing fire retardant paints Cabinet method
GB 4512-1984 Skid bricks and lower blocks for the small heating furnaces--Determination of silicon carbide

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, small tempering furnace

PREN 3519-1988 Steel FE-PL73 Hardened and Tempered 880 Less Than or Equal to Rm Less Than or Equal to 1080 MPa Bar for Machining De Less Than or Equal to 150 mm
PREN 3517-1988 Steel FE-PL73 Hardened and Tempered 1080 Less Than or Equal to Rm Less Than or Equal to 1280 MPa Bar for Machining De Less Than or Equal to 150 mm
PREN 2768-1988 Aerospace Series Steel FE-PL79 Carburized@ Hardened and Tempered 1180 Less Than or Equal to Rm Less Than or Equal to 1550 MPa Forgings De Less Than or Equal to 150 mm (Issue P 2)
PREN 3518-1994 Aerospace Series Steel FE-PL2105 Air Melted Hardened and Tempered Forgings De Less Than or Equal to 150 mm 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1280 MPa (Edition P 2)
PREN 3526-1988 Aerospace Series Steel FE-PL52 S Hardened and Tempered 980 Less Than or Equal to Rm Less Than or Equal to 1180 MPa Sheet 0@5 Less Than or Equal to a Less Than or Equal to 6 mm (Issue P 1)
PREN 3520-1988 Steel FE-PL73 Softened Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 200 mm
PREN 3491-1998 Aerospace Series Steel FE-PL3901 (X15CrNi17-3) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 100 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1 100 Mpa (Edition P2)
PREN 3507-1998 Aerospace Series Steel FE-PL1501 (30CrMo12) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 100 mm 930 MPa Less Than or Equal to Rm Less Than or Equal to 1 080 MPa (Edition P2)
PREN 2767-1988 Aerospace Series Steel FE-PL79 Carburized@ Hardened and Tempered 1180 Less Than or Equal to Rm Less Than or Equal to 1550 MPa Bar for Machining De Less Than or Equal to 150 mm (Issue P 2)
PREN 3515-1998 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 25 mm 1 100 MPa Less Than or Equal to Rm Less Than or Equal to 1 300 MPa (Edition P2)
PREN 2445-1997 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 45 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1 100 MPa (Edition 2)
PREN 3509-1998 Aerospace Series Steel FE-PL1501 (30CrMo12) Air Melted Hardened and Tempered Bar De Less Than or Equal to 40 mm 1 050 MPa Less Than or Equal to Rm Less Than or Equal to 1 250 MPa (Edition P2)
PREN 3508-1998 Aerospace Series Steel FE-PL1501 (30CrMo12) Air Melted Hardened and Tempered Bar De Less Than or Equal to 100 mm 930 MPa Less Than or Equal to Rm Less Than or Equal to 1 080 MPa (Edition P2)
PREN 2920-1988 Aerospace Series Steel FE-PL72 Carburized@ Hardened and Tempered Forgings De less Than or Equal to 160 mm (Issue P 1)
PREN 4628-2011 Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted Hardened and tempered Bar De less than or equal to 200 mm 1 150 MPa less than or equal to Rm less than or equal to 1 300 MPa (Edition P 2)
PREN 4631-2011 Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted Hardened and tempered Bar De less than or equal to 200 mm 900 MPa less than or equal to Rm less than or equal to 1 050 MPa (Edition P 2)
PREN 2764-1998 Aerospace Series Steel FE-PL1504 (33CrMoV12) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 80 mm 1 200 MPa Less Than or Equal to Rm Less Than or Equal to 1 400 MPa (Edition P 3)
PREN 3517-1994 Aerospace Series Steel FE-PL2105 Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1280 MPa (Edition P 2)
PREN 3519-1994 Aerospace Series Steel FE-PL2105 Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 880 MPa Less Than or Equal to Rm Less Than or Equal to 1080 MPa (Edition P 2)
PREN 3523-1997 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 100 mm 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1250 MPa (Edition P2)
PREN 3521-1998 Aerospace Series Steel FE-PL2106 (30CrNiMo8) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1 100 MPa (Edition P2)
PREN 2919-1988 Aerospace Series Steel FE-PL72 Carburized@ Hardened and Tempered Bar De Less Than or Equal to 160 mm (Issue P 1)
PREN 2135-1986 Aerospace Series Steel FE-PL61 Carburized@ Hardened and Tempered Bar De Less Than or Equal to 40 mm (Issue P 1)
PREN 2226-1977 Steel FE-PM43 Hardened and Tempered Hand and Die Forgings De Less Than or Eqal to 150 mm Aerospace Series (Edition 1)
PREN 3523-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 100 mm 1 080 MPa Less Than or Equal to Rm Less Than or Equal to 1 280 MPa (Edition P 2)
PREN 4631-2006 Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Bar De less than or equal to 200 mm 900 MPa less than or equal to Rm less than or equal to 1 050 MPa (Edition P 1)
PREN 2763-1998 Aerospace Series Steel FE-PL1504 (33CrMoV12) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 80 mm 1 200 MPa Less Than or Equal to Rm Less Than or Equal to 1 350 MPa (Edition P 3)
PREN 2475-1998 Aerospace Series Steel FE-PL2106 (30CrNiMo8) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 100 mm 1 100 MPa Less Than or Equal to Rm Less Than or Equal to 1 300 MPa (Edition P 1)
PREN 3490-1998 Aerospace Series Steel FE-PL3901 (X15CrNi17-3) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 200 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1 100 MPa (Edition P2)
PREN 4630-2006 Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Forgings De less than or equal to 200 mm 900 MPa less than or equal to Rm less than or equal to 1 050 MPa (Edition P 1)
PREN 3993-1997 Aerospace Series Steel FE-CM1501 (X13CrNiMoCo12-3-2-2) Hardened and Tempered Precision and Sand Castings De Less Than or Equal to 150 mm Rm Greater Than or Equal to 925 MPa (Edition P 1)
PREN 3365-1988 Aerospace Series Steel FE-PM42 Annealed Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 150 mm (Issue P 1)
PREN 3527-1988 Aerospace Series Steel FE-PL51 Annealed Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 100 mm (Issue P 1)
PREN 2227-1977 Steel FE-PM44 Hardened and Tempered Hand and Die Forgings De Less Than or Equal to 150 mm Aerospace Series (Edition 1)
PREN 3972-1997 Aerospace Series Steel FE-PL1507 (40CrMoV12) Consumable Electrode Remelted Hardened and Tempered Bar for Machining De Less Than or Equal to 50 mm 1 250 MPa Less Than or Equal to Rm Less Than or Equal to 1 400 MPa (Edition P 1)
PREN 3476-1988 Aerospace Series Steel FE-PL48 Softened Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 150 mm (Issue P 1)
PREN 3516-1988 Aerospace Series Steel Fe-PL711 Softened Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 35 mm (Issue P 1)
PREN 3522-1988 Aerospace Series Steel FE-PL79 Softened Reference Heat Treatment: Carburized@ Hardened and Tempered Forging Stock De Less Than or Equal to 200 mm (Issue P 1)
PREN 4090-1997 Aerospace Series Steel FE-PL5101 (13MoCrNiV4-4-3-1) Vacuum Induction Melted and Vacuum Arc Remelted Carburized@ Hardened@ Sub-Zero Treated and Tempered Forgings De Less Than or Equal to 30 mm 1 315 MPa Less Than or Equal to Rm Less Than or Equal to 1 650
PREN 4088-1997 Aerospace Series Steel FE-PL5101 (13MoCrNiV4-4-3-1) Vacuum Induction Melted and Vacuum Arc Remelted Carburized@ Hardened@ Sub-Zero Treated and Tempered Bar for Machining De Less Than or Equal to 30 mm 1 315 MPa Less Than or Equal to Rm Less Than or Equal
PREN 3354-1988 Aerospace Series Titanium Alloy TI-P63 Annealed 920 Less Than or Equal to Rm Less Than or Equal to 1180 MPa Sheet for Superplastic Forming a Less Than or Equal to 6 mm Issue P 1
PREN 3526-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet and Strip 0@5 mm Less Than or Equal to a Less Than or Equal to 6 mm 980 MPa Less Than Rm Less Than or Equal to 1 180 MPa (Edition P 2)
PREN 4098-1998 Aerospace Series Steel FE-PL1507 (40CrMoV12) Remelted Hardened and Tempered Forgings De Less Than or Equal to 50 mm 1 250 MPa Less Than or Equal to Rm Less Than or Equal to 1 400 MPa (Edition P 1)

Jilin Provincial Standard of the People's Republic of China, small tempering furnace

DB22/T 2913-2018 Technical Guidelines for Air Pollution Control of Small Coal-fired Boilers

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., small tempering furnace

ASHRAE CH-06-10-2006 Symposium on Managing Return Air in Residential and Small Commercial Buildings

ETSI - European Telecommunications Standards Institute, small tempering furnace

TR 103 230-2018 Fixed Radio Systems; Small cells microwave backhauling (V1.1.1)

IT-UNI, small tempering furnace

UNI 5688-1973 Refractory shapes for steelworks. Radial bricks for cupola lining. Dimensions and tolerances.
UNI 5689-1973 Refractory shapes for steelworks. Knife bricks for cupola lining. Dimensions and tolerances.
UNI 7843-1978 Refractory shapes for iron and steel industry. Special bricks for oxygen converter work lining. Dimensions and tolerances.
UNI 4006-1976 Refractory shapes for steelworks. Bricks for electric steel furnace roofs.

GB-REG, small tempering furnace

REG 40 CFR PART 1054-2011 CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT
REG 40 CFR PART 1054-2012 CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND EQUIPMENT

Hebei Provincial Standard of the People's Republic of China, small tempering furnace

DB13/ 229-1995 General Technical Conditions for Design and Manufacture of Small Boilers in Hebei Province

United States Navy, small tempering furnace

NAVY MIL-B-16907 G NOTICE 1-1998 BOILER, STEAM, HIGH PRESSURE, AUXILIARY FIRE TUBE TYPE, NAVAL SHIPBOARD

Underwriters Laboratories (UL), small tempering furnace

UL SUBJECT 2162-2001 Outline of Investigation for Commercial Wood-Fired Baking Ovens - Refractory Type (Issue 2)
UL SUBJECT 2162-1994 Outline of Investigation for Commercial Wood-Fired Baking Ovens - Refractory Type (Issue Number 1)
UL 2162 BULLETIN-2009 UL Standard for safety Outline of Investigation for Commercial Wood-Fired Baking Ovens - Refractory Type
UL 2162-2014 UL Standard for Safety for Commercial Wood-Fired Baking Ovens �C Refractory Type (First Edition)

US-CFR-file, small tempering furnace

CFR 46-52.25-2014 Shipping. Part52:Power boilers. Subpart52.25:Other boiler types.Section52.25-5:Miniature boiler (modifies PMB–1 through PMB–21).

Danish Standards Foundation, small tempering furnace

DS/ISO/TS 17431:2007 Fire tests - Reduced-scale model box test
DS/EN 15270:2012 Pellet burners for small heating boilers - Definitions, requirements, testing, marking

BE-NBN, small tempering furnace

NBN S 21-025-1978 Portable fire extinguishers - Loads - Minimum fire performances

RU-GOST R, small tempering furnace

GOST 21436-2004 Refractory and high-refractoty articles for the lining of rotary furnaces. Specifications
GOST 21436-1975 Refractory and highly-refractory articles for the lining of rotary furnaces. Specifications

PT-IPQ, small tempering furnace

NP EN 297/A5-2000 Gas-fired central heating boilers Type Bji e Bubs boilers, fitted with atmospheric burners of nominal heat input not

Aerospace, Security and Defence Industries Association of Europe (ASD), small tempering furnace

ASD-STAN PREN 4628-2011 Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted Hardened and tempered Bar De less than or equal to 200 mm 1 150 MPa less than or equal to Rm less than or equal to 1 300 MPa (Edition P 2)
ASD-STAN PREN 4631-2011 Aerospace series Steel X4CrNiMo16-5-1 (1.4418) Air melted Hardened and tempered Bar De less than or equal to 200 mm 900 MPa less than or equal to Rm less than or equal to 1 050 MPa (Edition P 2)

FI-SFS, small tempering furnace

NORDEST NT FIRE 026-1986

AENOR, small tempering furnace

UNE-EN 15270:2009 Pellet burners for small heating boilers - Definitions, requirements, testing, marking

Lithuanian Standards Office , small tempering furnace

LST EN 15270-2008 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
LST EN 4630-2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ? 200 mm - 900 MPa ? Rm ? 1 050 MPa
LST EN 4628-2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De ? 200 mm - 1 150 MPa ? Rm ? 1 300 MPa

国家质量监督检验检疫总局, small tempering furnace

SN/T 4511-2016 Safety requirements and test methods for small spray type ignition guns for import and export

Canadian Standards Association (CSA), small tempering furnace

CSA C49.3-1977-1977 Aluminum Alloy 1350 Round Wire, All Tempers, for Electrical Purposes Amendment 1-3: May 1991
CSA 3.1-77-CAN1-1977 Industrial and Commercial Gas-Fired Package Boilers Amendments A1-A13: January 1979; Update No 14

Military Standard of the People's Republic of China-General Armament Department, small tempering furnace

GJB 1265-1991 Ablation-resistant fiberglass bushing for small solid rocket motor

CENELEC - European Committee for Electrotechnical Standardization, small tempering furnace

EN 50200:2000 Method of Test for Resistance to Fire of Unprotected Small Cables for Use in Emergency Circuits

American National Standards Institute （ANSI), small tempering furnace

ANSI/ASTM D5207:1998 Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials (08.03)

Professional Standard - Military and Civilian Products, small tempering furnace

WJ 2685-2006 Small-caliber artillery turret and chassis interface structure type and parameter seat ring
WJ 2686-2006 Structural type and parameters of interface between turret and chassis of small-caliber artillery