ZH
RU
ES

nuclear power plant plutonium

nuclear power plant plutonium, Total:500 items.

In the international standard classification, nuclear power plant plutonium involves: Nuclear energy engineering, Ventilators. Fans. Air-conditioners, Iron and steel products, Burners. Boilers, Power transmission and distribution networks, Electrical wires and cables, Insulating materials, Transformers. Reactors, Valves, Galvanic cells and batteries, Rotating machinery, Buildings, Radiation measurements, Energy and heat transfer engineering in general, Occupational safety. Industrial hygiene, Software development and system documentation, Power stations in general, Electrical accessories, Protection of and in buildings, Electrical and electronic testing, Switchgear and controlgear.

Association Francaise de Normalisation, nuclear power plant plutonium

NF M60-413*NF EN ISO 12183:2019 Nuclear fuel technology - Controlled-potential coulometric assay of plutonium
NF EN ISO 12183:2019 Technologie du combustible nucléaire - Dosage du plutonium par coulométrie à potentiel imposé
NF C19-204*NF EN 60964:2010 Nuclear power plants - Control rooms - Design
NF C19-446*NF EN IEC 63046:2021 Nuclear power plants - Electrical power system - General requirements
NF C19-455*NF EN IEC 62855:2021 Nuclear power plants - Electrical power systems - Electrical power systems analysis
NF EN IEC 62855:2021 Centrales nucléaires de puissance - Systèmes d'alimentation électrique - Analyse des systèmes d'alimentation électrique
NF C19-227*NF EN 61227:2016 Nuclear power plants - Control rooms - Operator controls
NF EN ISO 8299:2021 Technologie du combustible nucléaire - Détermination de la teneur isotopique et de la concentration d'uranium et du plutonium dans les matières nucléaires en solution d'acide nitrique par spectrométrie de masse à thermo-ionisation
NF M60-403*NF EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
NF ISO 26062:2010 Technologie nucléaire - Combustibles nucléaires - Modes opératoires pour le mesurage des impuretés élémentaires des matériaux à base d'uranium et de plutonium par spectrométrie de masse avec plasma à couplage inductif
NF C19-214*NF EN 62241:2015 Nuclear power plants - Main control room - Alarm functions and presentation
NF C19-646*NF EN IEC 62646:2019 Nuclear power plants - Control rooms - Computer-based procedures
NF EN IEC 62954:2021 Centrales nucléaires de puissance - Salles de commande - Exigences pour les moyens de réaction d'urgence
NF M60-469*NF ISO 26062:2010 Nuclear technology - Nuclear fuels - Procedures for the measurement of elemental impurities in uranium- and plutonium based materials by inductively coupled plasma mass spectrometry.
NF C19-954*NF EN IEC 62954:2021 Nuclear power plants - Control rooms - Requirements for emergency response facilities

European Committee for Standardization (CEN), nuclear power plant plutonium

prEN ISO 12183 rev Nuclear fuel technology — Controlled-potential coulometric assay of plutonium

International Organization for Standardization (ISO), nuclear power plant plutonium

ISO/CD 12183:2023 Nuclear fuel technology — Controlled-potential coulometric assay of plutonium
ISO/DIS 12183:2018 Nuclear fuel technology — Controlled-potential coulometric measurement of plutonium
ISO 12183:2016 Nuclear fuel technology - Controlled-potential coulometric assay of plutonium
ISO 12183:2005 Nuclear fuel technology - Controlled-potential coulometric assay of plutonium
ISO 23467:2020 Ice plug isolation of piping in nuclear power plant
ISO 8299:2005 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
ISO/CD 3579 Reactor technology — Nuclear Power Plants —Installation of Structural modules
ISO 26062:2010 Nuclear technology - Nuclear fuels - Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry
ISO 8299:2019 Nuclear fuel technology — Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
ISO/DIS 4917-3 Design of Nuclear Power Plants against Seismic Events — Part 3: Civil Structures

British Standards Institution (BSI), nuclear power plant plutonium

BS EN ISO 12183:2019 Nuclear fuel technology. Controlled-potential coulometric assay of plutonium
BS ISO 12183:2016 Nuclear fuel technology. Controlled-potential coulometric assay of plutonium
ASME OM-2022 Operation and Maintenance of Nuclear Power Plants
BS ISO 23467:2020 Ice plug isolation of piping in nuclear power plant
BS IEC 63147:2017 Criteria for accident monitoring instrumentation for nuclear power generating stations
18/30355540 DC BS IEC 63046. Nuclear power plants. Electrical systems. General requirements
BS IEC 61227:2008 Nuclear power plants - Control rooms - Operator controls
BS EN ISO 8299:2021 Nuclear fuel technology. Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
BS 7517:1995 Nuclear power plants - Control rooms - Operator controls
BS IEC 60780:1999 Nuclear power plants - Electrical equipment of the safety system - Qualification
BS 7674:1993 Nuclear power plants - Instrumentation and control systems important for safety - Requirements for electrical supplies
BS IEC 62646:2016 Nuclear power plants. Control rooms. Computer-based procedures
BS IEC 60880:2001 Software for computers in the safety systems of nuclear power stations
BS IEC 62646:2012 Nuclear power plants. Control rooms. Computer based procedures
BS ISO 18195:2019 Method for the justification of fire partitioning in water cooled nuclear power plants (NPP)
21/30414714 DC BS EN IEC 63298. Nuclear Power Plants. Electrical power systems. Coordination and interaction with electric grid
BS ISO 26062:2010 Nuclear technology. Nuclear fuels. Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry
BS IEC 62241:2004 Nuclear power plants - Main control room - Alarm functions and presentation
23/30472818 DC BS IEC 63435. Nuclear power plants. Control rooms. Operatoring support system
BS IEC 61839:2000 Nuclear power plants - Design of control rooms - Functional analysis and assignment
BS EN 61772:2013 Nuclear power plants. Control rooms. Application of visual display units (VDUs)

ES-UNE, nuclear power plant plutonium

UNE-EN ISO 12183:2019 Nuclear fuel technology - Controlled-potential coulometric assay of plutonium (ISO 12183:2016) (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN IEC 60964:2019 Nuclear power plants - Control rooms - Design (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019) (Endorsed by Asociación Española de Norma...

German Institute for Standardization, nuclear power plant plutonium

DIN EN ISO 12183:2019-12 Nuclear fuel technology - Controlled-potential coulometric assay of plutonium (ISO 12183:2016); German version EN ISO 12183:2019
DIN EN ISO 12183:2019 Nuclear fuel technology - Controlled-potential coulometric assay of plutonium (ISO 12183:2016)
DIN 25453:2013 Test procedure for shielding in nuclear power plants
DIN 25453:1991 Test program for shielding in nuclear power plants
DIN IEC 61227:2009 Nuclear power plants - Control rooms - Operator controls (IEC 61227:2008)
DIN EN ISO 8299:2021-04 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019); English version EN ISO 8299:2021
DIN 25476:2023-03 Primary-coolant clean-up system in nuclear power plants with light water reactors
DIN V 25459:1990 Reinforced and prestressed concrete containment for nuclear power plants
DIN 25459:2021 Reinforced and prestressed concrete containment for nuclear power plants
DIN 25459:2014 Reinforced and prestressed concrete containment for nuclear power plants
DIN 25459:2021-03 Reinforced and prestressed concrete containment for nuclear power plants / Note: DIN 25459 (2014-11) and DIN 25459 Beiblatt 1 (2018-03) remain valid alongside this standard until 2021-08-31.

IAEA - International Atomic Energy Agency, nuclear power plant plutonium

NS-G-2.3-2001 Modifications to Nuclear Power Plants
NS-G-2.9-2003 Commissioning for Nuclear Power Plants
SSG-28-2014 Commissioning for Nuclear Power Plants
NS-R-1-2004 Safety of Nuclear Power Plants: Design
SSG-13-2011 Chemistry Programme for Water Cooled Nuclear Power Plants
NS-G-1.8-2004 Design of Emergency Power Systems for Nuclear Power Plants
NS-G-1.12-2005 Design of the Reactor Core for Nuclear Power Plants
NS-G-3.5-2003 Flood Hazard for Nuclear Power Plants on Coastal and River Sites
NS-G-2.5-2002 Core Management and Fuel Handling for Nuclear Power Plants
NS-G-1.10-2004 Design of Reactor Containment Systems for Nuclear Power Plants
NS-G-1.4-2003 Design of Fuel Handling and Storage Systems for Nuclear Power Plants

Institute of Electrical and Electronics Engineers (IEEE), nuclear power plant plutonium

IEEE 323-2003 Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
IEEE 323-1983 Qualifying class 1E equipment for nuclear power generating stations
IEEE 603-1980 Criteria for safety systems for nuclear power generating stations
IEEE 603-2009 Standard criteria for safety systems for nuclear power generating stations
IEEE 603-1998 Criteria for safety systems for nuclear power generating stations
IEEE 603/COR-2015 Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE 765-1983 IEEE Standard for Preferred Power Supply for Nuclear Power Generating Stations
IEEE Std 765-1983 IEEE Standard for Preferred Power Supply for Nuclear Power Generating Stations
IEEE Std 765-1995 IEEE Standard for preferred power supply(PPS) for nuclear power generating stations
IEEE Std 765-2006 Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE 308-2001 Criteria for class 1E power systems for nuclear power generating stations
IEEE 308-1991 Criteria for class 1E power systems for nuclear power generating stations
IEEE Std 765-2002 IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations
IEEE 334-1994 Qualifying continuous duty class 1E motors for nuclear power generating stations
IEEE 383-2015 Qualifying Electric Cables and Splices for Nuclear Facilities
IEEE 308-2012 IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE 382-1985 Qualification of actuators for power operated valve assemblies with safety-related functions for nuclear power plants
IEEE Std 765-2012 IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE Std 308-2001 IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE 765-2022 IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE No 308-1970 IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE Std 308-1991 IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE 308-1970 IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE Std 308-2012 IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE 308-2020 IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE Std 765-2022 IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE Std 308-2020 IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE 638-2013 Qualification of Class 1E Transformers for Nuclear Power Generating Stations
IEEE 638-1992 Qualification of Class 1E Transformers for Nuclear Power Generating Stations
IEEE Unapproved Draft Std P692/D3c, Oct 2009 Draft Standard Criteria for Security Systems for Nuclear Power Generating Stations
IEEE 765-2006 Preferred power supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE 535-1986 Qualification of class 1E lead storage batteries for nuclear power generating stations
IEEE 317-1983 Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
IEEE 649-1991 Qualifying class 1E motor control centers for nuclear power generating stations
IEEE P308/D1, October 2018 IEEE Draft Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE 572-1985 Qualification of class 1E connection assemblies for nuclear power generating stations
IEEE 934-1987 Requirements for replacement parts for class 1E equipment in nuclear power generating stations
IEEE Std 692-2010 IEEE Standard Criteria for Security Systems for Nuclear Power Generating Stations - Redline
IEEE Std 603-1977 IEEE Trial Use Standard for Safety Systems for Nuclear Power Generating Stations
IEEE Std 344-2013 IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations
IEEE Unapproved Draft Std P692/D3, Oct 2008 IEEE Draft Standard for Security Systems for Nuclear Power Generating Stations
IEEE P603/D5, July 2018 IEEE Draft Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE Unapproved Draft Std P603/D2, Nov 2008 IEEE Draft Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE Unapproved Draft Std P603/D2, Jun 2009 IEEE Draft Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE P603/D3, July 2017 IEEE Draft Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE P603/D4, May 2018 IEEE Draft Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE Std 279-1971 IEEE Standard: Criteria for Protection Systems for Nuclear Power Generating Stations
IEEE P692 D4b, March 2013 IEEE Draft Standard Criteria for Security Systems for Nuclear Power Generating Stations
IEEE Std 308-1971 IEEE Standard Criteria for Class IE Electric Systems for Nuclear Power Generating Stations
IEEE Std 308-1974 IEEE Standard Criteria for Class IE Power Systems for Nuclear Power Generating Stations
IEEE P765/D0, December 2020 IEEE Draft Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE P765/D3, August 2012 IEEE Draft Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE Std P765/D03, Mar 2006 IEEE Draft Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE P765/D2, March 2012 IEEE Draft Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE 308-1974 IEEE Standard Criteria for Class IE Power Systems for Nuclear Power Generating Stations
IEEE Std 833-2005 Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
IEEE 497-2010 Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE 497/COR-2003 Criteria for accident monitoring instrumentation for nuclear power generating stations; Errata
IEEE 497-2016 Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 271-1968 Proposed IEEE Criteria for Nuclear Power Plant Protection Systems
IEEE Std 692-1997 IEEE Standard Criteria for Security Systems for Nuclear Power Generating Stations
IEEE 323/323a-1974 IEEE Standard for Qualifying Class IE Equipment for Nuclear Power Generating Stations
IEEE 603-2018 IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE Std 323-2003 IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
IEEE Std 692-1986 IEEE Standard Criteria for Security Systems for Nuclear Power Generating Stations
IEEE Std 323-1974 IEEE Standard for Qualifying Class IE Equipment for Nuclear Power Generating Stations
IEEE Std 323-1983 IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
IEEE Std 603-1991 IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE Std 603-2009 IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations - Redline
IEEE Std 1082-1997 IEEE Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating Stations
IEEE Std 692-2013 IEEE Standard for Criteria for Security Systems for Nuclear Power Generating Stations
IEEE Std 603-2018 IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE Std 380-1975 IEEE Definitions of Terms Used in IEEE Standards on Nuclear Power Generating Stations
IEEE P338/D8, July 2022 IEEE Approved Draft Standard for Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
IEEE 535-2006 Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
IEEE 765-2012 IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE 833-1988 Recommended practice for the protection of electric equipment in nuclear power generating stations from water hazards
ANSI/IEEE Std 535-1986 IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
IEEE Std 535-2006 IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
IEEE 1792-2017 IEEE Recommended Practice for Nuclear Power Generating Station Preferred Power Supply Reliability
IEEE Std 535-1979 IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
IEEE Std 833-1988 IEEE Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
IEEE 627-1980 Design qualification of safety systems equipment used in nuclear power generating stations
ANSI/IEEE Std 572-1985 Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
IEEE P692/D4d, 26 June 2013 IEEE Draft Standard for Criteria for Security Systems for Nuclear Power Generating Stations
IEEE Unapproved Draft Std P497/D2, Mar 2010 IEEE Draft Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE 387-1995 Standard Criteria for Diesel-Generator Units Applied as Standby Power Generating Stations
IEEE P387/DD2017-01, June 2017 IEEE Draft Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
IEEE Std 933-2013 IEEE Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities
IEEE 383-2003 Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations
IEEE 741-2007 Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
IEEE 535-2013 IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations
IEEE Std C37.105-2010 Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
IEEE Std C37.105-1987 Qualifying class 1E protective relays and auxiliairies for nuclear power generating stations
IEEE 741-1990 Criteria for the protection of class 1E power systems and equipment in nuclear power generating stations
IEEE Std P535/D11 IEEE Draft: Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
IEEE P765/D1, December 2021 IEEE Approved Draft Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
IEEE P308/D2, 2019 IEEE Approved Draft Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE Std 1792-2017 IEEE Recommended Practice for Nuclear Power Generating Station Preferred Power Supply Reliability - Redline
IEEE Std 334-2006 IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
IEEE Std 1792-2011 IEEE Recommended Practice for Nuclear Power Generating Station (NPGS) Preferred Power Supply (PPS) Reliability
IEEE 690-1984 Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations R(2002)
IEEE Std 690-2004 IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
IEEE 382-2006 IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations
IEEE 344-2013 IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations
IEEE 638/COR-1999 Qualification of class 1E transformers for nuclear power generating stations; Corrections
IEEE P497/DA, April 2015 IEEE Draft Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 638-1992 IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations
IEEE Std 497-1981 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE P497/D3, July 2010 IEEE Draft Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 497-2010 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 338-1977 IEEE Standard Criteria for the Periodic Testing of Nuclear Power Generating Station Safety Systems
IEEE 338-1977 IEEE Standard Criteria for the Periodic Testing of Nuclear Power Generating Station Safety Systems
IEEE Std 572-2006 IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
IEEE P497/DB, January 2016 IEEE Draft Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 497-2002 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE 497-1981 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE 1033-1985 IEEE Recommended Practice for Application of IEEE Std 828 to Nuclear Power Generating Stations
IEEE Std 1033-1985 IEEE Recommended Practice for Application of IEEE Std 828 to Nuclear Power Generating Stations
IEEE Std 933-1999 IEEE Guide for the Definition of Reliability Program Plans for Nuclear Power Generating Stations
IEEE Std 497-2016 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 638-2013 IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations
IEEE P638/D10, August 2013 IEEE Draft Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations
IEEE 933-2013 IEEE Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities
IEEE 382-2019 IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE Std 382-2019 IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE P845/D2, July 2023 IEEE Draft Guide for the Evaluation of Human-System Performance in Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE 690-2004 Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
IEEE P334 IEEE Draft Standard for Qualifying Alternating Current Class 1E Motors for Nuclear Power Generating Stations
IEEE P334/D5, June 2022 IEEE Draft Standard for Qualifying Alternating Current Class 1E Motors for Nuclear Power Generating Stations
IEEE Std 344-1971*ANSI N41.7 IEEE Trial-Use Guide for Seismic Qualification of Class I Electric Equipment for Nuclear Power Generating Stations
IEEE Std 344-1971 (ANSI N41.7) IEEE Trial-Use Guide for Seismic Qualification of Class I Electric Equipment for Nuclear Power Generating Stations
IEEE 352-2016 Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Systems and Other Nuclear Facilities
IEEE P933/D5, January 2013 IEEE Draft Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities
IEEE P933/D6, July 2013 IEEE Draft Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities
IEEE P933/D4, January 2011 IEEE Draft Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities
IEEE P933/D4, August 2023 IEEE Draft Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities
IEEE P933/D3, July 2023 IEEE Draft Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities
IEEE P933/D2, May 2023 IEEE Draft Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities
IEEE Std 690-1984 IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
IEEE Std 387-1995 IEEE Standard criteria for diesel-generator units applied as standby power supplies for nuclear power generating stations
IEEE Std 690-2018 IEEE Standard for Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
IEEE P2420/D1, April 2019 IEEE Draft Standard Criteria for Combustion Turbine Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
IEEE Std 1819-2016 IEEE Standard for Risk-Informed Categorization and Treatment of Electrical and Electronic Equipment at Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE 344-2004 Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
IEEE 379-2014 Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems
IEEE Std C37.82-1987 Qualification of switchgear assemblies for class 1E applications in nuclear power generating stations
IEEE Std 382-2006 IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations
IEEE Std 497-1977 IEEE Trial Use Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 338-1971*ANSI N41.3 IEEE Trial-Use Criteria for the Periodic Testing of Nuclear Power Generating Station Protection Systems
IEEE 497-1977 IEEE Trial Use Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE P497/DC, January 2016 IEEE Approved Draft Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std C37.82-2017 The Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
IEEE 383-1974 Type test of class 1E electric cables; field splices and connections for nuclear power generating stations
IEEE Std 649-1991 IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
IEEE Std 649-2006 IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
ANSI/IEEE Std 649-1980 IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
IEEE Std 317-2013 IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
IEEE Std 317-1972*ANSI N45.3-1973 IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
IEEE Std 317-1976 IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
IEEE P308/D7, May 2012 IEEE Draft Standard for Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE Std 317-1983 IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
IEEE 317-1972 IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations

HU-MSZT, nuclear power plant plutonium

MSZ 14345/3-1980

SE-SIS, nuclear power plant plutonium

SIS SS-ISO 6258:1988 Nuclear power plants — Design against seismic hazards
SIS SS 436 90 02-1980 Nuclear power generating stations — Class IE electric systems
SIS SS IEC 772:1986 Nuclear instrumentation - Electrical penetration assemblies in containment structures for nuclear power generating stations
SIS SS IEC 880:1987 Nuclear instrumentation - Software for computers in the safety systems of nuclear power stations
SIS SS 436 90 03-1980 Nuclear power stations — Reactor shutdown without access to the main control room
SIS SS-ISO 6527:1986 Nuclear power plants - Reliability data exchange-General guidelines
SIS SS-ISO 7385:1986 Nuclear power plants- Guidelines to ensure quality of collected data on reliability

American Nuclear Society (ANS), nuclear power plant plutonium

ANS 2.2-2002 Earthquake Instrumentation Criteria for Nuclear Power Plants
ANS 2.23-2002 Nuclear Plant Response to an Earthquake
ANS 2.23-2016 Nuclear Power Plant Response to an Earthquake
ANS 6.4-1997 Nuclear Analysis and Design of Concrete Radiation Shielding for Nuclear Power Plants
ANS 6.4-2006 Nuclear Analysis and Design of Concrete Radiation Shielding for Nuclear Power Plants
ANS 6.1.2-1999 Neutron and Gamma-Ray Cross Sections for Nuclear Radiation Protection Calculations for Nuclear Power Plants

Korean Agency for Technology and Standards (KATS), nuclear power plant plutonium

KS A ISO 6258-2006(2016) Nuclear power plants－Design against seismic hazards
KS C IEC 61771-2012(2017) Nuclear power plants－Main control-room－Verification and validation of design
KS C IEC 60772:2012 Electrical penetration assemblies in containment structures for nuclear power generating stations
KS C IEC 61227-2012(2017) Nuclear power plants－Control rooms－Operator controls
KS C IEC 60951-5-2004(2014) Nuclear power plants－Radiation monitoring equipment for accident and post-accident conditions－Part 5：Radioactivity of air in light water nuclear power plants
KS C IEC 60772-2012(2022) Electrical penetration assemblies in containment structures for nuclear power generating stations
KS C IEC 62397:2012 Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
KS C IEC 60772-2012(2017) Electrical penetration assemblies in containment structures for nuclear power generating stations
KS C IEC 62241:2012 Nuclear power plants－Main control room－Alarm functions and presentation
KS C IEC 62465:2012 Nuclear power plants-Instrumentation and control important to safety-Management of ageing of electrical cabling systems
KS C IEC 62342:2012 Nuclear power plants－Instrumentation and control systems important to safety－Management of ageing
KS C IEC 61772:2012 Nuclear power plants－Control rooms－Application of visual display units(VDUs)
KS C IEC 61771:2012 Nuclear power plants－Main control-room－Verification and validation of design

Group Standards of the People's Republic of China, nuclear power plant plutonium

T/ZZB 007-2015 Centrifugal fans for nuclear island of nuclear power plant
T/ZZB 0099-2016 Axial fans for nuclear island of nuclear power plant
T/CEC 317-2020 Specifications for the training and assessment of live inspection personnel in substations
T/QGCML 180-2021 Substation protection information automatic check system
T/QGCML 180-2023 Substation protection information automatic verification system

European Committee for Electrotechnical Standardization（CENELEC）, nuclear power plant plutonium

EN 60964:2010 Nuclear power plants - Control rooms - Design
EN IEC 60964:2019 Nuclear power plants - Control rooms - Design
EN IEC 62855:2021 Nuclear power plants - Electrical power systems - Electrical power systems analysis
EN 61227:2016 Nuclear power plants - Control rooms - Operator controls
EN 62241:2015 Nuclear power plants - Main control room - Alarm functions and presentation
EN IEC 62646:2019 Nuclear power plants - Control rooms - Computer-based procedures
EN IEC 62954:2021 Nuclear power plants - Control rooms - Requirements for emergency response facilities
EN IEC 62645:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Cybersecurity requirements
EN 61772:2013 Nuclear power plants - Control rooms - Application of visual display units (VDUs)
EN 61839:2014 Nuclear power plants - Design of control rooms - Functional analysis and assignment

JP-JEM, nuclear power plant plutonium

JEM 1423-2008 Inspection of nuclear power plant valves
JEM TR 153-2008 Valves-gland packing procedure for nuclear power plant
JEM 1444-2008 Inspection of positioners used for nuclear power plant valves
JEM 1431-2008 Testing programs for stationary lead-acic batteries for nuclear power power plants
JEM 1421-2008 Class1 pumps for nuclear power plants-Hydraulic performance tests
JEM 1422-2008 Class2 pumps etc. for nuclear power plants-Hydraulic performance tests
JEM 1429-2008 Pre-operational testing programs for a.c.power supply systems for nuclear power plants

International Electrotechnical Commission (IEC), nuclear power plant plutonium

IEC 60964:2009 Nuclear power plants - Control rooms - Design
IEC 63147:2017 Criteria for accident monitoring instrumentation for nuclear power generating stations
IEC 60780:1984 Qualification of electrical items of the safety system for nuclear power generating stations
IEC 61227:2008 Nuclear power plants - Control rooms - Operator controls
IEC 63096:2020 Nuclear power plants - Instrumentation, control and electrical power systems - Security controls
IEC 62646:2012 Nuclear power plants - Control rooms - Computer based procedures
IEC 61772:2009 Nuclear Power Plants - Control rooms - Application of visual display units (VDUs)
IEC 60780/AMD1:1991 Qualification of electrical items of the safety system for nuclear power generating stations; amendment 1

Danish Standards Foundation, nuclear power plant plutonium

DS/EN 60964:2010 Nuclear power plants - Control rooms - Design
DS/EN IEC 63046:2021 Nuclear power plants – Electrical power system – General requirements
DS/EN IEC 62855:2021 Nuclear power plants – Electrical power systems – Electrical power systems analysis
DS/EN ISO 8299:2021 Nuclear fuel technology – Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
DS/EN 61772:2013 Nuclear power plants - Control rooms - Application of visual display units (VDUs)

Canadian Standards Association (CSA), nuclear power plant plutonium

CSA N293-2012 Fire protection for nuclear power plants (Fourth Edition)
CSA N293-07-2008 Protection contre l抜ncendie dans les centrales nucl閍ires CANDU troisi鑝e 閐ition
CSA N293-07-2007 Fire protection for CANDU nuclear power plants Third Edition; Reprinted January 2008; Incorporates Update No 1: January 2008; Supplement No 1: November 2008; Update No 2: July 2009; Supplement No 2: January 2010
CSA N285.4-05-CAN/CSA UPD 1-2007 Periodic Inspection of CANDU Nuclear Power Plant Components
CSA N290.13-05-2005 Environmental qualification of equipment for CANDU nuclear power plants First Edition
CSA N285.4-2014 Inspection périodique des composants des centrales nucléaires CANDU (sixième édition)
CSA N285.4-09-2009 Periodic inspection of CANDU nuclear power plant components Fifth Edition
CSA N285.4-05-CAN/CSA-2005 Periodic Inspection of CANDU Nuclear Power Plant Components
CSA N290.8-2015 Technical specification requirements for nuclear power plant components (First Edition)
CSA N290.13-05 UPD 1-2009 Environmental qualification of equipment for CANDU nuclear power plants First Edition
CSA N290.5-06-2006 Exigences relatives aux syst鑝es d抋limentation 閘ectrique et en air d抜nstrumentation des centrales nucl閍ires CANDU Deuxi鑝e Edition
CSA N285.6 SERIES-05-2005 Material Standards for Reactor Components for CANDU Nuclear Power Plants
CSA N289.1-80-CAN3-1980 Exigences Generales Relatives A La Qualification Parasismique Des Centrales Nucleaires CANDU Fiche No 1
CSA N285.5-2013 Periodic inspection of CANDU nuclear power plant containment components (Fourth Edition)

Professional Standard - Machinery, nuclear power plant plutonium

JB/T 12214-2015 Nuclear power station ring crane
JB/T 12429-2015 Class 1E heat-shrinkable power cable splices in nuclear power generating stations
JB/T 11333-2013 Class 1E heat-shrinkable tubing for low voltages in nuclear power stations
JB/T 50054-1999 Assessment method of reliability of internal combustion engine power stations

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., nuclear power plant plutonium

IEEE 765-1995 Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations
IEEE 765-2002 Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations
IEEE 279-1971 Criteria for Protection Systems for Nuclear Power Generating Stations
IEEE N42.7-1972 Criteria for Protection Systems for Nuclear Power Generating Stations
IEEE 308-1971 Criteria for Class IE Electric Systems for Nuclear Power Generating Stations
IEEE 535 INT 1-2009 Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
IEEE 535-1979 QUALIFICATION OF CLASS 1E LEAD STORAGE BATTERIES FOR NUCLEAR POWER GENERATING STATIONS
IEEE 638 ERTA-1999 Qualification of Class 1E Transformers for Nuclear Power Generating Stations
IEEE 692-2010 Standard Criteria for Security Systems for Nuclear Power Generating Stations
IEEE 692-1997 Standard Criteria for Security Systems for Nuclear Power Generating Stations
IEEE 603 ERTA-2015 Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE 323-1974 Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
IEEE 692-2013 Standard Criteria for Security Systems for Nuclear Power Generating Stations
IEEE 308-1980 STANDARD CRITERIA FOR CLASS 1E POWER SYSTEMS FOR NUCLEAR POWER GENERATING STATIONS
IEEE 308-1978 Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE 420-1973 Trial-Use Guide for Class IE Control Switchboards for Nuclear Power Generating Stations
IEEE P308/D1-2018 Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
IEEE 1082-1997 Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating Stations
IEEE 603 CORR-1987 Criteria for Safety Systems for Nuclear Power Generating Stations Correction Sheet
IEEE 380-1975 Definitions of Terms Used in IEEE Standards on Nuclear Power Generating Stations
IEEE 572-2019 Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE 344-1971 TRIAL-USE FOR SEISMIC QUALIFICATION OF CLASS I ELECTRIC EQUIPMENT FOR NUCLEAR POWER GENERATING STATIONS
IEEE 649-1980 STANDARD FOR QUALIFYING CLASS 1E MOTOR CONTROL CENTERS FOR NUCLEAR POWER GENERATING STATIONS
IEEE 833-2005 Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
IEEE 497-2002 Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE 572-2006 Qualifcation of Class 1E Connection Assemblies for Nuclear Power Generating Stations
IEEE 603-1977 Trial-Use Standard Criteria for Safety Systems for Nuclear Power Generating Stations
IEEE 497 ERTA-2003 Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE 845-1999 Guide for the Evaluation of Human-System Performance in Nuclear Power Generating Stations
IEEE P690/D7-2018 The Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
IEEE 323-1971 General Guide for Qualifying Class I Electric Equipment for Nuclear Power Generating Stations
IEEE 741-2017 Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
IEEE 317-1976 Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
IEEE 1819-2016 Risk-Informed Categorization and Treatment of Electrical and Electronic Equipment at Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE 933-1999 Guide for the Definition of Reliability Program Plans for Nuclear Power Generating Stations
IEEE 381-1977 CRITERIA FOR TYPE TESTS OF CLASS 1E MODULES USED IN NUCLEAR POWER GENERATING STATIONS
IEEE 567-1980 Trail-Use Standard Criteria for the Design of the Control Room Complex for a Nuclear Power Generating Station
IEEE 572 ERTA-2014 Errata to Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
IEEE 572-1984 Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
IEEE 387 INT 1-2005 Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
IEEE 387-1977 Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
IEEE 690-2018 Standard for Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
IEEE 622-1987 Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear Power Generating Stations
IEEE 1792-2011 Recommended Practice for Nuclear Power Generating Station (NPGS) Preferred Power Supply (PPS) Reliability
IEEE 603-1991 Standard Criteria for Safety Systems for Nuclear Power Generating Stations (Correction Sheet 1/30/95)
IEEE 338-2012 Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
IEEE 692-1986 STANDARD CRITERIA FOR SECURITY SYSTEMS FOR NUCLEAR POWER GENERATING STATIONS (WITHDRAWN)
IEEE 344 INT 1-2002 Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
IEEE 338-1971 Trial-Use Criteria for the Periodic Testing of Nuclear Power Generating Station Protection Systems
IEEE P572/D4-2018 Draft Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE P382/D3-2019 Draft Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE 1290-2015 Guide for Motor-Operated Valve (MOV) Motor Application@ Protection@ Control@ and Testing in Nuclear Power-Generating Stations
IEEE 1290 INT 1-2-2001 Guide for Motor Operated Valve (MOV) Motor Application@ Protection@ Control@ and Testing in Nuclear Power Generating Stations
IEEE 1290-1996 Guide for Motor Operated Valve (MOV) Motor Application@ Protection@ Control@ and Testing in Nuclear Power Generating Stations
IEEE 382-1972 Trial-Use Guide for Type Test of Class 1 Electric Valve Operators for Nuclear Power Generating Stations

国家市场监督管理总局、中国国家标准化管理委员会, nuclear power plant plutonium

GB/T 36163-2018 Alloy steel plate for nuclear power plants
GB/T 40882-2021 Forgings of main pipes for nuclear power plant of generation Ⅲ—Technological specification

ANS - American Nuclear Society, nuclear power plant plutonium

58.4-1979 CRITERIA FOR TECHNICAL SPECIFICATIONS FOR NUCLEAR POWER STATIONS
2.23-2002 Nuclear Plant Response to an Earthquake
2.23-2016 Nuclear Power Plant Response to an Earthquake
2.13-1979 Evaluation of Surface-Water Supplies for Nuclear Power Sites
6.4-2006 Nuclear Analysis and Design of Concrete Radiation Shielding for Nuclear Power Plants
6.4-1997 Nuclear Analysis and Design of Concrete Radiation Shielding for Nuclear Power Plants
2.17-2010 evaluation of subsurface radionuclide transport at commercial nuclear power plants

IT-UNI, nuclear power plant plutonium

UNI ISO 23467:2021 Ice plug isolation of piping in nuclear power plant
UNI EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry

American National Standards Institute （ANSI), nuclear power plant plutonium

ANSI/ANS 2.23-2016 Nuclear Power Plant Response to an Earthquake
ANSI/IEEE 308:2001 Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
ANSI/ANS 2.17-2010 Evaluation of Subsurface Radionuclide Transport at Commercial Nuclear Power Plants
ANSI/ASME OM-2012 Operation and Maintenance of Nuclear Power Plants
ANSI/IEEE 308:2012 Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations
ANSI/IEEE 765:2006 Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
ANSI/ASME/ANS RA-S-2008 Probabilistic Risk Assessment for Nuclear Power Plant Applications
ANSI/ASME BPVCSection 11-2013 Rules for Inservice Inspection of Nuclear Power Plant Components
ANSI/IEEE 603:2009 Standard Criteria for Safety Systems for Nuclear Power Generating Stations
ANSI/IEEE 317:1983 Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
ANSI/IEEE 833:2005 Recommended Practices for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
ANSI/IEEE 323:2003 Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
ANSI/IEEE 627:2010 Standard for Qualification of Equipment Used in Nuclear Facilities
ANSI/ANS 6.4-2006 Concrete Radiation Shielding for Nuclear Power Plants, Guidelines on the Nuclear Analysis and Design of
ANSI/IEEE 649:2006 Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
ANSI/IEEE 638:1992 Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations
ANSI/IEEE 690:2004 Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
ANSI/IEEE 535:2006 Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
ANSI/IEEE 692:1997 Standard Criteria for Security Systems for Nuclear Power Generating Stations
ANSI/IEEE 933:1999 Guide for the Definition of Reliability Program Plans for Nuclear Power Generating Stations
ANSI/IEEE 338:2007 Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
ANSI/IEEE 383:2003 Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations
ANSI/ANS 6.1.2-2013 Neutron and Gamma-Ray Cross Sections for Nuclear Radiation Protection and Shielding Calculations for Nuclear Power Plants
ANSI/ASME QME-1-2012 Qualification of Active Mechanical Equipment Used in Nuclear Power Plants
ANSI/IEEE 572:2006 Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
ANSI/IEEE 497:2010 Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations

American Society of Mechanical Engineers (ASME), nuclear power plant plutonium

ASME S0003R ADDENDA-2001 Section III: Rules for Construction of Nuclear Power Plant Components Subsection NCA
ASME S0003R ADDENDA-2002 Section III: Rules for Construction of Nuclear Power Plant Components Subsection NCA
ASME S0003R-2001 Section III: Rules for Construction of Nuclear Power Plant Components Subsection NCA
ASME OM-1995 Code for operation and maintenance of nuclear power plants
ASME OM-1990 Code for operation and maintenance of nuclear power plants
ASME OM-2001 Code for the Operation and Maintenance of Nuclear Power Plants with Addenda (OM - 2001)
ASME N509-1989 Nuclear Power Plant Air-Cleaning Units and Components with Addenda (N509 - 1989)
ASME RA-S-2002 ADD C-2007 STANDARD FOR PROBABILISTIC RISK ASSESSMENT FOR NUCLEAR POWER PLANT APPLICATIONS
ASME RA-S-2002 ADD B-2005 Standard for Probabilistic Risk Assessment for Nuclear Power Plant Applications
ASME RA-S-2002 ADD A-2003 Standard for Probabilistic Risk Assessment for Nuclear Power Plant Applications
ASME N509-2002 Nuclear Power Plant Air-Cleaning Units and Components
ASME RA-S-2002-2002 Standard for Probabilistic Risk Assessment for Nuclear Power Plant Applications
ASME N-3-2011 Owners' Data Report For Nuclear Power Plant Components
ASME N45.2.3-1973 Housekeeping during the construction phase of nuclear power plants
ASME AG 1-1994 Code on nuclear air and gas treatment
ASME AG-1a-1996 Code on Nuclear Air and Gas Treatment
ASME AG 1-1991 Code on nuclear air and gas treatment
ASME AG-1-2017 Code on Nuclear Air and Gas Treatment
ASME AG-1-1997 Code on Nuclear Air and Gas Treatment/with Addenda (AG-1 - 1997)
ASME AG-1-2009 Code on Nuclear Air and Gas Treatment (AG-1 - 2009)
ASME AG-1-2012 Code on Nuclear Air and Gas Treatment
ASME OM-S/G-2000 Standards and guides for operation and maintenance of nuclear power plants
ASME N45.2.3a Addenda-1978 Housekeeping during the construction phase of nuclear power plants; Addenda
ASME AG 1b Addenda-1993 Code on nuclear air and gas treatment; Addenda
ASME STP-NU-051-2011 Code Comparison Report for Class 1 Nuclear Power Plant Components
ASME STP-NU-051-2012 Code Comparison Report for Class 1 Nuclear Power Plant Components
ASME STP-NU-051-1-2012 CODE COMPARISON REPORT for Class 1 Nuclear Power Plant Components
ASME AG 1a Addenda-1996 Code on nuclear air and gas treatment; Addenda
ASME AG 1a Addenda-1992 Code on nuclear air and gas treatment; Addenda
ASME S00011 ADDENDA-2001 Section XI: Rules for Inservice Inspection of Nuclear Power Plant Components
ASME S00011 ADDENDA-2002 Section XI: Rules for Inservice Inspection of Nuclear Power Plant Components
ASME S00011-2001 Section XI: Rules for Inservice Inspection of Nuclear Power Plant Components
ASME ANS RA-S-1.4-2021 Probabilistic Risk Assessment Standard for Advanced Non- Light Water Reactor Nuclear Power Plants
ASME OM CODE CASES-2003 Code Cases to OM CODE Code for Operation and Maintenance of Nuclear Power Plants
ASME OM CODE INTERPRETATIONS-1998 Interpretations to OM CODE-1998 Code for Operation and Maintenance of Nuclear Power Plants
ASME OM CODE CASES-1999 Code Cases to OM CODE Code for Operation and Maintenance of Nuclear Power Plants
ASME QME-1-2007 Qualification of Active Mechanical Equipment Used in Nuclear Power Plants
ASME AG-1a Addenda-2009 Code on Nuclear Air and Gas Treatment; Addenda
ASME QME-1-2012 Qualification of Active Mechanical Equipment Used in Nuclear Power Plants
ASME OMA CODE-2011 Addenda to ASME OM-2009 Operation and Maintenance of Nuclear Power Plants

PL-PKN, nuclear power plant plutonium

PN O91061-1992 Protective footwear. Footwear for atomic plant workers
PN O91060-1992 Work footwear. Footwear for atomic plant workers
PN-EN ISO 8299-2021-07 E Nuclear fuel technology -- Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, nuclear power plant plutonium

GB/T 22577-2008 Class 1E cables for nuclear power generating stations.General requirements
GB/T 41754-2023 Duplex stainless steel plate used for nuclear power plants
GB/T 25838-2010(英文版) Qualification of safety class resistance temperature detectors for nuclear power plants
GB/T 31941-2015 Non-nuclear safety class welded carbon steel and alloy steel pipes for nuclear power plant
GB/T 28551-2012(英文版) Technical guideline of centrifugal pump set commissioning for nuclear power plant
GB 30813-2014 Welded austenitic stainless steel tubes and pipes for nuclear power plant
GB 30814-2014 Steel plates of carbon steel and low alloy steel for nuclear power plants
GB/T 28550-2012(英文版) Piping verification requirement during nuclear power plant commissioning
GB/T 51340-2018 Technical standard for steel plate concrete structure of nuclear power plant
GB/T 43107-2023 Stainless steel seamless steel pipe for instrument pressure induction in nuclear power plants

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, nuclear power plant plutonium

GB/T 36027-2018 Austenitic stainless steel bars for nuclear power plants
GB/T 30814-2014 Steel plates of carbon steel and low alloy steel for nuclear power plants
GB/T 30813-2014 Welded austenitic stainless steel tubes and pipes for nuclear power plant
GB/T 34915-2017 Austenitic stainless steel plate，sheet and strip for nuclear power plants

RU-GOST R, nuclear power plant plutonium

GOST 31901-2013 Pipeline valves for nuclear stations. General specifications
GOST R 52287-2004 Electrical penetration in containment structures for nuclear power generating stations
GOST R IEC 62241-2021 Signaling systems for main control room of nuclear power plants. Functional requirements

Lithuanian Standards Office , nuclear power plant plutonium

LST EN 60964-2010 Nuclear power plants - Control rooms - Design (IEC 60964:2009)
LST EN IEC 63046:2021 Nuclear power plants - Electrical power system - General requirements (IEC 63046:2020)
LST EN IEC 62855:2021 Nuclear power plants - Electrical power systems - Electrical power systems analysis (IEC 62855:2016)
LST EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)

American Welding Society (AWS), nuclear power plant plutonium

WRC 376:1992 Metal Fatigue In Operating Nuclear Power Plants
WRC 353:1990 Position Paper On Nuclear Plant Pipe Supports

BELST, nuclear power plant plutonium

STB 2334-2013 Nuclear power plants. Safety. Protection of nuclear power plant`s computer systems. General requirements
STB 2333-2013 Nuclear power plants. Safety. Nuclear power plant computer systems security audit. Rules and procedures

Indonesia Standards, nuclear power plant plutonium

SNI IEC 60780:2008 Nuclear power plants - Electrical equipment of the safety system - Qualification

GOSTR, nuclear power plant plutonium

GOST R 58786-2019 Electric equipment for nuclear power plants. General technical requirements
GOST R 58328-2018 Piping of nuclear power plants. ？Leak before break？ concept
GOST R 59246-2020 Turbogenerators of nuclear power plants. Accounting for actually worked out and estimation of residual resource
GOST R 58341.6-2020 Power transformers of nuclear power plants. Accounting for actually worked out and estimation of residual resource
GOST R 58341.4-2020 Pipeline, a pressure vessel, a pump unit of a nuclear power plant. Accounting actually worked out and assessment of the residual resource
GOST R IEC 61227-2020 Operator controls of control rooms on nuclear power plants. Design requirements

AT-OVE/ON, nuclear power plant plutonium

OVE EN IEC 63046:2021 Nuclear power plants - Electrical power system - General requirements (english version)
OVE EN IEC 62855:2021 Nuclear power plants - Electrical power systems - Electrical power systems analysis (IEC 45A/1094/FDIS) (english version)

Professional Standard - Electricity, nuclear power plant plutonium

DL/T 1103-2009 Testing and evaluation of vibration in nuclear power plant piping system

Professional Standard - Hygiene , nuclear power plant plutonium

WS/T 440-2014 Specification for health survey of residents in the vicinity area of nuclear power plant

ISA - International Society of Automation, nuclear power plant plutonium

ISA MNTRNG MEAS I&C PERF NUC PWR PLNT-2014 Monitoring and Measuring I&C Performance in Nuclear Power Plants
ISA S67.02-1980 Nuclear-Safety-Related Instrument Sensing Line Piping and Tubing Standards for Use in Nuclear Power Plants

Professional Standard - Energy, nuclear power plant plutonium

NB/T 25111-2020 Technical Guidelines for Commissioning of Desalinated Water Stations of Nuclear Power Plants

Professional Standard - Nuclear Industry, nuclear power plant plutonium

EJ/T 722-1992 Noise Control Standards for Nuclear Power Plant Production Buildings

CZ-CSN, nuclear power plant plutonium

CSN 25 8321-1986 Combined temperature sensors for nuclear power stations Technical requirements

工业和信息化部, nuclear power plant plutonium

JB/T 13918-2020 Internal combustion engine power station reliability assessment and evaluation method

国家能源局, nuclear power plant plutonium

NB/T 25081-2018 Nuclear power plant piping system vibration testing and evaluation

IEC - International Electrotechnical Commission, nuclear power plant plutonium

IEC 60050 GROUP 26:1968 International Electrotechnical Vocabulary Group 26 Nuclear Power Plants for Electric Energy Generation (Edition 2.0)

AT-ON, nuclear power plant plutonium

OENORM EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)

CH-SNV, nuclear power plant plutonium

SN EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)

VE-FONDONORMA, nuclear power plant plutonium

E42-26-1969

ACI - American Concrete Institute, nuclear power plant plutonium

ACI 349.1R-1991 Reinforced Concrete Design for Thermal Effects on Nuclear Power Plant Structures
ACI 349.1R-2007 Reinforced Concrete Design for Thermal Effects on Nuclear Power Plant Structures

National Fire Protection Association (NFPA), nuclear power plant plutonium

NFPA 803-1998 Standard for Fire Protection for Light Water Nuclear Power Plants Effective Date: 2/6/1998