ZH
RU
ES

protective case

protective case, Total:319 items.

In the international standard classification, protective case involves: Components for aerospace construction, Components and accessories for telecommunications equipment, Insulation, Rubber and plastics products, Iron and steel products, Non-ferrous metals, Refrigerating technology, Protection against fire, Aerospace electric equipment and systems, Medical equipment, Insulating materials, Shipbuilding and marine structures in general, Components for electrical equipment, Pipeline components and pipelines, Materials for aerospace construction, Protective equipment, Clothes, Construction materials, Petroleum, petroleum products and natural gas handling equipment, Fluid storage devices, Electrical equipment for working in special conditions, Electrical accessories.

SE-SIS, protective case

SIS SMS 2234-1965 Protective housings for gas cylinders

Professional Standard - Aviation, protective case

HB 6-31-1983 rubber boot
HB 6-29-1983 rubber boot
HB 6-31-1976 rubber boot
HB 6-32-1976 rubber boot
HB 6-33-1983 rubber boot
HB 6-29-1976 rubber boot
HB 6-34-1976 rubber boot
HB 6-35-1983 rubber boot
HB 6-35-1976 rubber boot
HB 6-30-1983 rubber boot
HB 6-36-1976 rubber boot
HB 6-32-1983 rubber boot
HB 6-36-1983 rubber boot
HB 6-33-1976 rubber boot
HB 6-34-1983 rubber boot
HB 6-30-1976 rubber boot

Group Standards of the People's Republic of China, protective case

T/SZZX 004-2019 Mobile Phone Cases
T/CEC 647-2022 Technical specifications for insulating protective bushings for overhead lines in distribution networks
T/SGX 015-2022 Self-rolling protective sleeves for wiring harnesses Part 1: New energy vehicles

PK-PSQCA, protective case

PS 1428-1979 SPECIFICATION FOR RUBBER PROTECTIVE SHEATHS (CONDOMS)

Standard Association of Australia （SAA）, protective case

AS 4702:2000(R2013)

U.S. Military Regulations and Norms, protective case

ARMY A-A-50230 VALID NOTICE 3-2011 Blanket, Fire (Wool, with Case)

Society of Automotive Engineers (SAE), protective case

SAE AS4506-1-1953 AS4506-4511 Protection Sleeve for Propeller Shaft
SAE AS6224-2020 Wrap-Around Insulation Repair and Protection Sleeve, Permanent, Electric, Environment Resistant
SAE AS5258/5-2004 Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile, Miniature
SAE AS5258/6-2004 Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile, Miniature

German Institute for Standardization, protective case

DIN 47409:1985-07 Protective sleeves against kinking for telecommunication cords
DIN 49670:1986 Gauges for lampholders with protective collar for fluorescent lamps
DIN 14900:2015 Axe for fire fighters with protective cover
DIN 14900:1988 Axe for fire fighters, with protective cover
DIN EN 6049-006:2012-06 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard; German and English version EN 6049-006:2012
DIN 28149:1991 Protective sleeve for thermotips for agitator vessels; connecting dimensions
DIN 3542:1998 Connectors and connector protection sockets on barrels - Mating dimensions
DIN EN 6049-009:2020-02 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible post- installation, operating temperature from -55 °C to 260 °C - Product standard; German and Eng...
DIN 43724:1979 Electrical temperature sensors; ceramic protecting tubes and holding rings for thermocouple thermometers
DIN EN 6049-006:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard; German and English version EN 6049-006:2012
DIN EN 6049-007:2012-06 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from -55 °C to 260 °C - Product stand...
DIN EN 6059-100:2015-09 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General; German and English version EN 6059-100:2015
DIN EN 6059-502:2015-03 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs; German and English version EN 6059-502:2014 / Note: Applies in conjunction with DIN EN 6059-100 (2012-03).
DIN EN 6059-406:2014-07 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration; German and English version EN 6059-406:2014 / Note: Applies in conjunction with DIN EN 6059-100 (2012-03).
DIN EN 6059-304:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 304: Flammability; German and English version EN 6059-304:2017
DIN EN 6059-401:2022-10 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 401: Expansion range; German and English version EN 6059-401:2022
DIN EN 6059-304:2017-07 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 304: Flammability; German and English version EN 6059-304:2017 / Note: Applies in conjunction with DIN EN 6059-100 (2015-09).
DIN EN 6059-301:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 301: Sun light exposure; German and English version EN 6059-301:2017
DIN EN 6059-305:2019 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 305: Fluid absorption; German and English version EN 6059-305:2019
DIN EN 6059-303:2018 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids; German and English version EN 6059-303:2017
DIN EN 6059-302:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 302: High temperature exposure; German and English version EN 6059-302:2017
DIN EN 6059-401:2022 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 401: Expansion range; German and English version EN 6059-401:2022
DIN EN 6059-203:2023-07 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 203: Coverage; English version prEN 6059-203:2023 / Note: Date of issue 2023-06-23
DIN EN 6059-303:2018-02 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids; German and English version EN 6059-303:2017 / Note: Applies in conjunction with DIN EN 6059-100 (2015-09).
DIN EN 6059-302:2017-07 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 302: High temperature exposure; German and English version EN 6059-302:2017 / Note: Applies in conjunction with DIN EN 6059-100 (2015-09).
DIN EN 6059-301:2017-07 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 301: Sun light exposure; German and English version EN 6059-301:2017 / Note: Applies in conjunction with DIN EN 6059-100 (2015-09).
DIN EN 6059-501:2011-06 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test; German and English version EN 6059-501:2010 / Note: Applies in conjunction with DIN EN 6059-100 (2012-03).
DIN EN 6059-402:2019-08 Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods - Part 402: Bending properties; German and English version EN 6059-402:2019 / Note: Applies in conjunction with DIN EN 6059-100 (2015-09).
DIN EN 6059-305:2019-09 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 305: Fluid absorption; German and English version EN 6059-305:2019 / Note: Applies in conjunction with DIN EN 6059-100 (2015-09).
DIN EN 6059-402:2019 Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods - Part 402: Bending properties; German and English version EN 6059-402:2019
DIN EN 6049-008:2018 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 ？C to 200 ？C - Prod
DIN EN 4674-001:2017-06 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification; German and English version EN 4674-001:2017
DIN EN 6049-001:2018-11 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification; German and English version EN 6049-001:2018
DIN EN 6059-601:2014-07 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 601: Open and close; German and English version EN 6059-601:2014 / Note: Applies in conjunction with DIN EN 6059-100 (2012-03).
DIN EN 6059-202:2017-03 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 202: Dimensions and mass; German and English version EN 6059-202:2016 / Note: Applies in conjunction with DIN EN 6059-100 (2015-09).
DIN EN 6059-308:2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 308: Rapid change of temperature; German and English version EN 6059-308:2014
DIN EN 6059-504:2014-10 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve; German and English version EN 6059-504:2014 / Note: Applies in conjunction...
DIN EN 4674-001:2015 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification; German and English version EN 4674-001:2015
DIN EN 6059-308:2015-03 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 308: Rapid change of temperature; German and English version EN 6059-308:2014 / Note: Applies in conjunction with DIN EN 6059-100 (2012-03).
DIN EN 6049-005:2015-03 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard; German and English version EN 6049-005:2014
DIN EN 6049-005:2023-07 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard; English version prEN 6049-005:2023 / Note: Date of issue 2023-06-23*Intended as replacement ...
DIN EN 6049-008:2018-02 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C -...
DIN EN 6059-505:2023-07 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 505: Lightning strike, current and voltage pulse; English version prEN 6059-505:2023 / Note: Date of issue 2023-06-23
DIN EN 6049-007:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping protective sleeve, flexible post installation operating temperature from -55 °C to 260 °C - Product standard; German and English version
DIN EN 6049-001:2018 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification; German and English version EN 6049-001:2018

IN-BIS, protective case

IS 3701-1966

Professional Standard - Construction Industry, protective case

JG/T 3053-1998 Flexible metal conduits

Professional Standard - Urban Construction, protective case

CJ/T 3053-1998 Flexible metal wire protection sleeve

AR-IRAM, protective case

IRAM 3600-1962

Professional Standard - Chemical Industry, protective case

HG/T 4624-2014 Anti-dust sealing protective sleeve of vehicle sliding pin

CZ-CSN, protective case

CSN 42 8717-1976 Lead pipes with internal tin jacket. Dimensions
CSN 83 2354-1974 Leather five finger protecting gloves with shortened ?Lngers

AT-ON, protective case

ONORM F 4001-1969
ONORM EN 407-1994 Protective gloves against thermal risks (Heat and/or fire)
ONORM E 6513-1995 Pliable cable protecting conduits with socketed end of PE-LD, piain, normal Performance Conduits gaines cintrables, avec manchon en PE-LD, lisses, type normal

Professional Standard - Machinery, protective case

JB/T 11529-2013 Protection tube of air-condition's outlet connection

European Committee for Electrotechnical Standardization（CENELEC）, protective case

EN 50286:1999 Electrical Insulating Protective Clothing for Low-Voltage Installations

Korean Agency for Technology and Standards (KATS), protective case

KS C IEC 61229:2017 Rigid protective covers for live working on a.c. installations

KR-KS, protective case

KS C IEC 61229-2017 Rigid protective covers for live working on a.c. installations

PL-PKN, protective case

PN P84665-02-1988 Hand protections Long threefinger protection gloves
PN BN 9317-51-1967
PN BN 2761-04-1966
PN P84665-06-1989 Hand protection Long fivefingered protection gloves from pig leather
PN P84665-04-1989 Hand protections Long threefingered protection gloves from thermoresistance leather

European Committee for Standardization (CEN), protective case

EN 6049-006:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard
EN 6059-100:2011 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General
prEN 407-1992 Protective gloves against thermal risks (heat and/or fire)
prEN 388-1992 Protective gloves against mechanical risks
EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test
EN 6059-100:2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General
EN 6059-406:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration
EN 6059-504:2014 Aerospace series - Electrical cables@ installation - Protection sleeves - Test methods - Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve
EN 6049-007:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standard
EN 6059-502:2009 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs
EN 6059-303:2017 Aerospace series - Electrical cables@ installation - Protection sleeves - Test methods - Part 303: Resistance to fluids
EN 6059-301:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 301: Sun light exposure
FprEN 6059-401-2021 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 401: Expansion range
EN 4674-001:2017 Aerospace series - Electrical cables@ installation - Selfwrapping shielding (EMI) protective sleeve - Part 001: Technical specification
EN 4674-001:2015 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification
EN 6059-601:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 601: Open and close
EN 6059-308:2014 Aerospace series - Electrical cables@ installation - Protection sleeves - Test methods - Part 308: Rapid change of temperature
EN 361:2002 Personal protective equipment against falls from a height - Full body harnesses
EN 6049-005:2014 Aerospace series - Electrical cables@ installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible@ post installation - Product standard

Military Standards (MIL-STD), protective case

DOD A-A-53100-1987 GLOVES, X-RAY PROTECTIVE

Danish Standards Foundation, protective case

DS/EN 511:1994 Protective gloves against cold
DS/EN 6049-006:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard
DS/EN 388:1994 Protective gloves against mechanical risks
DS/EN 407:1994 Protective gloves against thermal risks (heat and/or fire)
DS/EN 6049-007:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standard
DS/EN 6059-100:2012 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General
DS/EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test
DS/EN 6059-502:2009 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs
DS/R 2321.1:1985 Protective gloves against chemicals. Part 1: Terminology
DS/EN 6049-008:2013 Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from - 55 ËšC to 200 ËšC -
DS/EN 13160-7:2003 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
DS/R 2321.0:1985 Protective gloves against chemicals. Part 0: General information
DS/EN 421:1994 Protective gloves against ionizing radiation and radioactive contamination

Association Francaise de Normalisation, protective case

NF EN 6049-006:2013 Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 006 : gaine de protection auto-fermable, souple après montage - Norme de produit
NF EN 6049-005:2015 Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 005 : gaine de protection souple à installer au montage - Normes de produit
NF EN 6059-504:2014 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 504 : augmentation de température due à l'auto-échauffement d'un faisceau de câbles avec gaine de protection
NF L52-010-006*NF EN 6049-006:2013 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006 : self-wrapping protective sleeve, flexible post installation - Product standard
NF EN 6049-009:2016 Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 009 : gaine de protection auto-fermable, souple, montage après installation, température d'utilisation - 55 oC à 260 oC - Norme de pro...
NF EN 6059-501:2010 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 501 : tenue en tension
NF EN 6059-406:2015 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 406 : vibrations
NF EN 6059-100:2015 Série Aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 100 : généralités
NF L50-150-100:2012 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100 : general.
NF L50-150-100*NF EN 6059-100:2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100 : general
NF L50-150-406*NF EN 6059-406:2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406 : vibration
NF EN 6059-502:2015 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 502 : résistance aux arcs électriques
NF EN 6059-304:2017 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 304 : résistance au feu
NF L52-010-007*NF EN 6049-007:2013 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007 : self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from - 55 oC to 260 oC - Product standard
NF L50-150-502*NF EN 6059-502:2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502 : resistance to electrical arcs
NF L50-150-304*NF EN 6059-304:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 304 : flammability
NF EN 6059-402:2019 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 402 : aptitude à la flexion
NF EN 6059-401:2022 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 401 : gamme d'expansion
NF EN 6059-303:2017 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 303 : résistance aux fluides
NF EN 6059-305:2019 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 305 : absorption des fluides
NF ISO 11933-2:1997 Composants pour enceintes de confinement - Parties 2 : gants, sacs à souder, manches de protection pour pinces à distance et télémanipulateurs.
NF L50-150-502:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502 : resistance to electrical arcs.
NF L50-150-303*NF EN 6059-303:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303 : resistance to fluids
NF L50-150-402*NF EN 6059-402:2019 Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods - Part 402 : bending properties
NF L50-150-301*NF EN 6059-301:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 301 : sun light exposure
NF L50-150-305*NF EN 6059-305:2019 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 305 : fluid absorption
NF L50-150-302*NF EN 6059-302:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 302 : high temperature exposure
NF EN 6059-302:2017 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 302 : exposition à haute température
NF EN 6059-202:2017 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 202 : dimensions et masse
NF L52-010-008:2013 Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramid fibres - Part 008: self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from - 55 oC to 200 oC - Pr
NF L52-010-008*NF EN 6049-008:2017 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008 : self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 oC to 200 oC - Pro
NF L52-020-001:2015 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001 : technical specification
NF L50-150-601*NF EN 6059-601:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 601 : open and Close
NF L50-150-202*NF EN 6059-202:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 202 : dimensions and mass
NF EN 6059-308:2015 Série aérospatiales - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 308 : variation rapide de température
NF EN 4674-001:2017 Série aérospatiale - Câbles électriques, installation - Gaine de protection blindée (EMI) auto-fermable - Partie 001 : spécification technique
NF EN 6049-001:2018 Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 001 : spécification technique
NF EN 6059-301:2017 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 301 : exposition au soleil
NF L50-150-501*NF EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501 : voltage proof test
NF L50-150-308*NF EN 6059-308:2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 308 : rapid change of temperature
NF L52-020-001*NF EN 4674-001:2017 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001 : technical specification
NF A35-037-3:2021 Steel products - Protected and sheathed high strength steel strands - Part 3 : requirements for adherent protected sheathed strands (type SC)
NF L50-150-503:2012 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503 : temperature rise due to rated current injected on the sleeve.
NF L52-010-001*NF EN 6049-001:2018 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001 : technical specification
UTE C15-150-22U*UTE C15-150-22:2001 Protective insulating sleeve used for protection of electrodes and connections

American Society for Testing and Materials (ASTM), protective case

ASTM F478-14 Standard Specification for In-Service Care of Insulating Line Hose and Covers
ASTM F478-14a Standard Specification for In-Service Care of Insulating Line Hose and Covers
ASTM F3031-17 Standard Practice for Range of Motion Evaluation of First Responder’s Protective Ensembles
ASTM C1775-22 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
ASTM C1916-21 Standard Specification for Flexible Protective Jackets Made of Modified Asphalt/Butyl Rubber for Use over Thermal Insulation

HU-MSZT, protective case

MSZ KGST 1308-1978

RO-ASRO, protective case

STAS 7014-1987 POLYVINIYL, CHLORIDE CRAINS FOR INSULATION AMD PROIEC- TIVE SHEATHING FOR ELEC- TRICAL W1RES AND CABLES
STAS 9533-1982 PROTECTION SLEEVES FOR ELECTRICAL APPARATUS TERMINALS FOR MOTOR VEHICLES Types and sizes
STAS SR EN 388-1996 Protective gloves against mechanical risks
STAS 6763-1977 Curred leathers for technical goods COMBINED TANNED LEATHERS FOR SLEEVES FOR WORSTED WOOL MILLS

Japanese Industrial Standards Committee (JISC), protective case

JIS F 8806:1996 Shipbuilding -- Synthetic rubber protective sheaths of portable cord

British Standards Institution (BSI), protective case

BS EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Voltage proof test
BS EN 17650:2022 A framework for digital preservation of cinematographic works. The Cinema Preservation Package
21/30406636 DC BS EN 17650. A framework for digital preservation of cinematographic works. The Cinema Preservation Package
BS EN 6049-007:2012 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Self-wrapping protective sleeve, flexible post installation operating temperature from 55 °C to 260 °C. Product standard
BS EN 6059-100:2011 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. General
BS EN 6059-406:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Vibration
BS EN 6059-100:2015 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. General
BS EN 6059-301:2017 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Sun light exposure
BS EN 6059-502:2009 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Resistance to electrical arcs
BS EN 6059-304:2017 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Flammability
BS EN 6059-502:2010 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Resistance to electrical arcs
BS EN 6059-303:2017 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Resistance to fluids
BS EN 6059-502:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Resistance to electrical arcs
BS EN 6059-401:2022 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods - Expansion range
BS EN 407:2004 Protective gloves against thermal risks (heat and/or fire)
BS EN 6059-302:2017 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. High temperature exposure
BS EN 6059-308:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Rapid change of temperature
BS EN 6049-008:2013 Aerospace series. Electrical cables, installation. Protective sleeves in meta-aramid fibres. Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55°C to 200°C. Product standard
BS EN 6049-008:2017 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 C to 200 C. Product st
BS EN 6059-601:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Open and close
BS EN 6059-202:2016 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Dimensions and mass
BS 6076:1996 Specification for polymeric film for use as a protective sleeving for buried iron pipes and fittings (for site and factory application)
BS EN 4674-001:2015 Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve. Technical specification
BS EN 4674-001:2017 Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve. Technical specification
BS EN 6049-001:2015 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Technical specification
BS EN 6049-001:2018 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Technical specification
BS EN 6059-407:2019 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods - Mark adherence and print permanence
BS EN 6059-503:2017 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods - Temperature rise due to rated current injected on the sleeve
20/30421258 DC BS EN 6059-401. Aerospace series. Electrical cables, installation. Protection sleeves. Test methods - Part 401. Expansion range
23/30461983 DC BS EN 6059-203. Aerospace series. Electrical cables, installation. Protection sleeves. Test methods - Part 203. Coverage
BS EN 4674-002:2015 Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve. General and list of product standard
15/30333202 DC BS EN 6059-402. Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Part 402. Bending properties
BS EN 6059-309:2018 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods - Fire resistance when fitted on a cable bundle
BS EN 6059-504:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Temperature rise within a loom due to self-heating when protected by a sleeve
BS EN 6059-503:2012 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Temperature rise due to rated current injected on the sleeve
BS EN 6049-005:2014 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Sleeve flexible, post installation. Product standard
BS EN 6049-002:2010 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - General and list of product standards

ES-UNE, protective case

UNE-EN 6049-006:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard (Endorsed by AENOR in April of 2012.)
UNE-EN 6049-007:2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standard (Endorsed by AENOR in...
UNE-EN 6049-009:2016 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C - Product standard (Endorsed by AE...
UNE-EN 6059-100:2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General (Endorsed by AENOR in August of 2015.)
UNE-EN 6059-406:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration (Endorsed by AENOR in June of 2014.)
UNE-EN 6059-304:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 304: Flammability (Endorsed by Asociación Española de Normalización in May of 2017.)
UNE-EN 6059-502:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs (Endorsed by AENOR in February of 2015.)
UNE-EN 6059-402:2019 Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods - Part 402: Bending properties (Endorsed by Asociación Española de Normalización in May of 2019.)
UNE-EN 6059-305:2019 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 305: Fluid absorption (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN 6059-501:2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test (Endorsed by AENOR in May of 2010.)
UNE-EN 6059-401:2022 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 401: Expansion range (Endorsed by Asociación Española de Normalización in June of 2022.)
UNE-EN 6059-301:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 301: Sun light exposure (Endorsed by Asociación Española de Normalización in May of 2017.)
UNE-EN 6059-303:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-EN 6059-302:2017 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 302: High temperature exposure (Endorsed by Asociación Española de Normalización in May of 2017.)
UNE-EN 6059-601:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 601: Open and close (Endorsed by AENOR in June of 2014.)
UNE-EN 4674-001:2017 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification (Endorsed by Asociación Española de Normalización in May of 2017.)
UNE-EN 6059-202:2016 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 202: Dimensions and mass (Endorsed by Asociación Española de Normalización in February of 2017.)
UNE-EN 6049-001:2018 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification (Endorsed by Asociación Española de Normalización in October of 2018.)
UNE-EN 6059-308:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 308: Rapid change of temperature (Endorsed by AENOR in February of 2015.)
UNE-EN 6049-008:2017 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C -...
UNE-EN 6059-504:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve (Endorsed by AENOR in September of 2014.)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, protective case

PREN 6059-504-2012 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 504: Temperature rise within a loom due to self-heating when within a protective sleeve (Edition P 1)
PREN 6049-006-2010 Aerospace series Electrical cables@ installation Protection sleeve in meta-aramid fibres Part 006: Self-wrapping protective sleeve@ flexible post installation Product standard (Edition P 4)
PREN 6049-006-2001 Aerospace Series Electrical Cables@ Installation Protection Sleeve in Meta-Aramid Fibres Part 006: Self-Wrapping Protective Sleeve@ Flexible Post Installation Product Standard (Edition P 1)
PREN 6049-006-2005 Aerospace series Electrical cables@ installation Protection sleeve in meta-aramid fibres Part 006: Self-wrapping protective sleeve@ flexible post installation Product standard (Edition P 3)
PREN 6049-006-2003 Aerospace Series Electrical Cables@ Installation Protection Sleeve in Meta-Aramid Fibres Part 006: Self-Wrapping Protective Sleeve@ Flexible Post Installation Product Standard (Edition P 2)
PREN 6049-008-2006 Aerospace series Electrical cables@ installation Protection sleeve in meta-aramid fibres Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid@ flexible post installation operating temperature from - 55 °C to 200 °C Product Sta
PREN 6049-007-2010 Aerospace series Electrical cables@ installation Protection sleeve in meta-aramid fibres Part 007: Self-wrapping protective sleeve@ flexible post installation operating temperature from - 55 Degrees C to 260 Degrees C Product standard (Edition P 1)
PREN 6049-008-2016 Aerospace series Electrical cables@ installation Protection sleeve in meta-aramid fibres Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid@ flexible post installation operating temperature from - 55 °C to 200 °C Product sta
PREN 6059-406-2012 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 406: Vibration (Edition P 2)
PREN 6059-100-2001 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 100: General (Edition P 2)
PREN 6059-100-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 100: General (Edition P 1)
PREN 6059-406-2001 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 406: Vibration (Edition P 1)
PREN 6059-100-2010 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 100: General (Edition P 3)
PREN 6059-100-2013 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 100: General (Edition P 4)
PREN 6059-502-2009 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 502: Resistance to electrical arcs (Edition P 1)
PREN 6059-304-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 304: Flamability (Edition P 1)
PREN 6059-304-2015 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 304: Flammability (Edition P 2)
PREN 6059-501-2009 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 501: Voltage proof test (Edition P 1)
PREN 6059-302-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 302: High Temperature Exposure (Edition P 1)
PREN 6059-404-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 404: Tensile Strength (Edition P 1)
PREN 6059-305-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 305: Fluid Absorption (Edition P 1)
PREN 6059-403-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 403: Scrape Abrasion (Edition P 1)
PREN 6059-303-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 303: Resistance to Fluids (Edition P 1)
PREN 6059-402-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 402: Bending Properties (Edition P 1)
PREN 6059-402-2017 Aerospace series Electrical cables@ installation - Protection sleeves - Test methods - Part 402: Bending properties (Edition P 2)
PREN 6059-201-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 201: Visual Inspection (Edition P 1)
PREN 6059-401-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 401: Expansion Range (Edition P 1)
PREN 6059-405-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 405: Dynamic Cut-Through (Edition P 1)
PREN 6059-301-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 301: Sun Light Exposure (Edition P 1)
PREN 6059-303-2001 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 303: Resistance to Fluids (Edition P 2)
PREN 6059-303-2016 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 303: Resistance to fluids (Edition P 3)
PREN 6059-305-2017 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 305: Fluid absorption (Edition P 2)
PREN 6059-306-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 306: Mould Growth (Edition P 1)
PREN 6059-203-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 203: Coverage (Edition P 1)
PREN 6059-502-2013 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 502: Resistance to electrical arcs (Edition P 2)
PREN 6059-202-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeves Test Methods Part 202: Dimensions and Mass (Edition P 1)
PREN 6059-601-2012 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 601: Open and close (Edition P 1)
PREN 6059-202-2015 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 202: Dimensions and mass (Edition P 2)
PREN 6059-308-2012 Aerospace series Electrical cables@ installation Protection sleeves Test methods Part 308: Rapid change of temperature (Edition P 1)
PREN 6049-001-2013 Aerospace series Electrical cables@ installation Protection sleeve in meta-aramid fibres Part 001: Technical specification (Edition P 3)
PREN 6049-001-1997 Aerospace Series Electrical Cables@ Installation Protection Sleeve in Meta-Aramid Fibres Part 001: Technical Specification (Edition P 1)
PREN 6049-001-2016 Aerospace series Electrical cables@ installation Protection sleeve in meta-aramid fibres Part 001: Technical specification (Edition P 4)
PREN 4674-001-2015 Aerospace series Electrical cables@ installation Self-wrapping shielding (EMI) protective sleeve Part 001: Technical specification (Edition P 2)
PREN 4674-001-2012 Aerospace series Electrical cables@ installation Self-wrapping shielding (EMI) protective sleeve Part 001: Technical specification (Edition P 1)
PREN 6049-001-2001 Aerospace Series Electrical Cables@ Installation Protection Sleeve in Meta-Aramid Fibres Part 001: Technical Specification (Edition P 2)

Lithuanian Standards Office , protective case

LST EN 6049-006-2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard
LST EN 6049-007-2012 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standard
LST EN 6059-100-2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General
LST EN 6059-100-2012 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General
LST EN 6049-008-2013 Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from - 55 ?C to 200 ?C - Pr
LST EN 6059-502-2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs
LST EN 6059-502-2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs
LST EN 6059-501-2010 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test
LST EN 13160-7-2004 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets

SAE - SAE International, protective case

SAE AS6224-2015 Wrap-Around Insulation Repair and Protection Sleeve@ Permanent@ Electric@ Environment Resistant

未注明发布机构, protective case

BS EN 50237:2000 mitts with mechanical protection for electrical purposes
BS EN 6059-305:2019 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods Part 305 : Fluid absorption

Electronic Components, Assemblies and Materials Association, protective case

ECA 540A000-A-1990 Sectional Specification for Sockets for Chip Carriers for Use in Electronic Equipment

Taiwan Provincial Standard of the People's Republic of China, protective case

CNS 14962-2005 Gas cylinders - Valve protection caps and valve guard for industrial and medical gas cylinders - Design, construction and tests

IT-UNI, protective case

UNI 5262-1963

Aerospace, Security and Defence Industries Association of Europe (ASD), protective case

ASD-STAN PREN 6049-008-2016 Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from - 55 °C to 200 °C Product sta
ASD-STAN PREN 6059-406-2012 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 406: Vibration (Edition P 2)
ASD-STAN PREN 6059-100-2013 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 100: General (Edition P 4)
ASD-STAN PREN 6059-502-2013 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 502: Resistance to electrical arcs (Edition P 2)
ASD-STAN PREN 6059-304-2015 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 304: Flammability (Edition P 2)
ASD-STAN PREN 6059-303-2016 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 303: Resistance to fluids (Edition P 3)
ASD-STAN PREN 6059-601-2012 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 601: Open and close (Edition P 1)
ASD-STAN PREN 6059-202-2015 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 202: Dimensions and mass (Edition P 2)
ASD-STAN PREN 6059-401-2020 Aerospace series Electrical cables, installation - Protection sleeves - Test methods - Part 401: Expansion range (Edition P 2)
ASD-STAN PREN 6059-308-2012 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 308: Rapid change of temperature (Edition P 1)
ASD-STAN PREN 4674-001-2012 Aerospace series Electrical cables, installation Self-wrapping shielding (EMI) protective sleeve Part 001: Technical specification (Edition P 1)
ASD-STAN PREN 6049-001-2013 Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 001: Technical specification (Edition P 3)
ASD-STAN PREN 4674-001-2015 Aerospace series Electrical cables, installation Self-wrapping shielding (EMI) protective sleeve Part 001: Technical specification (Edition P 2)

CEN - European Committee for Standardization, protective case

EN 6059-402:2019 Aerospace Series - Electrical cables@ installation - Protection sleeves - Test methods - Part 402: Bending properties
EN 6059-305:2019 Aerospace series - Electrical cables@ installation - Protection sleeves - Test methods - Part 305: Fluid absorption

CENELEC - European Committee for Electrotechnical Standardization, protective case

EN 50237:1997 Gloves and Mitts with Mechanical Protection for Electrical Purposes

European Association of Aerospace Industries, protective case

AECMA PREN 6059-502-2009 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 502: Resistance to electrical arcs Edition P 1
AECMA PREN 6059-501-2009 Aerospace series Electrical cables, installation Protection sleeves Test methods Part 501: Voltage proof test Edition P 1

Professional Standard - Commodity Inspection, protective case

SN 0103-1992 Rule for inspection of leatherworking gloves for export

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, protective case

GB/T 9701-1988 Rule of inspection of leather working gloves for export

AENOR, protective case

UNE-EN 13160-7:2003 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets