ZH
RU
ES
Ball friction and wear test
Ball friction and wear test, Total:160 items.
In the international standard classification, Ball friction and wear test involves: Iron and steel products, Plastics, Conducting materials, Lubricants, industrial oils and related products, Road vehicle systems, Paints and varnishes, Mechanical testing, Surface treatment and coating, Products of the textile industry, Testing of metals, Bearings, Ceramics, Processes of the textile industry, Waxes, bituminous materials and other petroleum products, Construction materials, Environmental testing, Paper and board, Quality, Linear and angular measurements, Flexible drives and transmissions, Graphic technology, Electrical accessories, Raw materials for rubber and plastics, Products of the chemical industry.
AT-ON, Ball friction and wear test
- ONORM M 8125-1994 Tribotechnique - Testing of friction and wear - Model test: System ball-on-disc
- ONORM M 8121-3-1994 Tribotechnique - Tribological test - Wear quantities
- OENORM EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
(U.S.) Ford Automotive Standards, Ball friction and wear test
International Federation of Trucks and Engines, Ball friction and wear test
Group Standards of the People's Republic of China, Ball friction and wear test
- T/CSTM 00646.1-2021 Ｍetal materials－Friction and wear testing with a pin-on-disk apparatus － Part 1: Friction and wear testing at ambient temperature
- T/CSTM 00646.2-2021 Metal materials_—Friction and wear testing with a pin-on-disk apparatus — Part 2: Friction and wear testing at high-temperature
ES-AENOR, Ball friction and wear test
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Ball friction and wear test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ball friction and wear test
- GB/T 3960-1983 Test method for friction and wear of plastics by sliding
- GB 3960-1983 Test method for friction and wear of plastics by sliding
- GB/T 29066-2012 Road vehicles.Brake lining friction materials.Standard wear test procedure for commercial vehicles with air brakes
Association Francaise de Normalisation, Ball friction and wear test
- NF T51-110/A1:1977 PLASTICS. PLANE TO PLANE CONTACT WEAR AND FRICTION TEST. ALTERNATING LINEAR FRICTION.
- NF T30-310:2020 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
- NF T51-110:1975 Wear test by means of friction with plane to plane contact (friction by means of alternating linear sliding).
- NF E22-580:1987 PLAIN BEARINGS. TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS. PART 1 : TESTING OF THE FRICTION AND WEAR BEHAVIOUR OF BEARING MATERIAL/MATING MATERIAL/OIL COMBINATIONS UNDER CONDITIONS OF BOUNDARY LUBRICATION.
- NF ISO 18535:2016 Revêtements de carbone amorphe - Détermination des caractéristiques de frottement et d'usure des revêtements de carbone amorphe par la méthode bille sur disque
- NF T51-107:1977 Plastics. Linear contact. Wear and friction test (sliding of a cylinder over a plane).
- NF A91-151*NF ISO 18535:2016 Diamond-like carbon films - Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
- NF T70-503:2007 Energetic materials for defense - Safety, vulnerability - Friction sensitivity test - BAM test.
- NF T70-503:1995 Energetic materials for defense. Safety, vulnerability. Friction sensitivity test. Bam test.
- NF L52-250-503*NF EN 3475-503:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503 : scrape abrasion
工业和信息化部, Ball friction and wear test
- YB/T 4993-2022 Test methods for friction and wear properties of carbon materials
American Society for Testing and Materials (ASTM), Ball friction and wear test
- ASTM D5183-05 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
- ASTM D5183-95(1999)e1 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
- ASTM D5183-21a Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
- ASTM D5183-05(2016) Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
- ASTM D5183-21 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
- ASTM D3702-94(1999) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
- ASTM D3702-94(2019) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
- ASTM D2714-94(2014) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D4170-10 Standard Test Method for Fretting Wear Protection by Lubricating Greases
- ASTM D3702-94(2009) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
- ASTM D6279-99e1 Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D6279-20 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D2714-94(1998) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D2714-94(2019) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D3702-94(2004) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
- ASTM D3702-94(2014) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
- ASTM D6425-02 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM D6425-05 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM D6425-05(2010)e1 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM D6425-11 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM D5707-11 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D6425-17 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM D6425-19 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM D5707-98(2003)e1 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D5707-98 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D5707-19 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D5707-16 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D6425-99 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
- ASTM D6279-03(2007) Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D6279-03 Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D4213-96e1 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
- ASTM D4213-96(2003) Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
- ASTM D4213-08 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
- ASTM D5707-05(2011)e1 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM C808-75(2000) Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
- ASTM C808-75(2010)e1 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
- ASTM C808-75(2021) Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
- ASTM D6279-03(2013) Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM D5183-05(2011) Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
- ASTM D4213-08(2016) Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
- ASTM C808-75(2016) Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
- ASTM D5264-98(2019) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
- ASTM D2714-94(2003) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D2714-94(2009) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D6279-15 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM G223-23 Standard Test Method for Measuring Friction and Adhesive Wear Properties of Lubricated and Nonlubricated Materials Using the Twist Compression Test (TCT)
- ASTM D1508-02e2 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM D1508-02e1 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM D1508-02(2007) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM D1508-02(2007)e1 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM D1508-12 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM D5264-98(2004) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
- ASTM D5264-98 Standard Test Method for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
- ASTM D8316-20 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine
- ASTM D8316-20a Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine
Professional Standard - Building Materials, Ball friction and wear test
- JC/T 2102-2012 Wear test procedure on inertia dynamometer for brake friction materials
Korean Agency for Technology and Standards (KATS), Ball friction and wear test
- KS M ISO 6601:2003 Plastics－Friction and wear by sliding－Identification of test parameters
- KS M ISO 6601-2003(2018) Plastics－Friction and wear by sliding－Identification of test parameters
- KS R 0079-2013 Wear test procedure on inertia dynamometer-brake lining and pad
- KS R 0079-2002 Wear test procedure on inertia dynamometer-Brake friction materials
- KS K 0650-2011 Test method for colour fastness to rubbing-Crock meter method
- KS K 0650-1985 Test method for colour fastness to rubbing-Crock meter method
- KS L ISO 20808:2013 Fine Ceramics (Advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
- KS K 0680-2011 Test method for color fastness to crocking：Rotary vertical crockmeter method
- KS F 2811-2016(2021) Method of abrasion test for building materials and part of building construction (Method of abrasion test for flooring materials method with rotating disk fitted friction and impact)
International Organization for Standardization (ISO), Ball friction and wear test
- ISO 6601:2002 Plastics - Friction and wear by sliding - Identification of test parameters
- ISO 21546:2019 Paints and varnishes — Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
- ISO 6601:1987 Plastics; Friction and wear by sliding; Identification of test parameters
- ISO 18535:2016 Diamond-like carbon films - Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
- ISO 7148-1:1985 Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of the friction and wear behaviour of bearing material/mating material/oil combinations under conditions o
- ISO 26866:2009 Road vehicles - Brake lining friction materials - Standard wear test procedure for commercial vehicles with air brakes
- ISO 20808:2004 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
- ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
IT-UNI, Ball friction and wear test
- UNI EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
German Institute for Standardization, Ball friction and wear test
- DIN 51191:2015-01 Vitreous and porcelain enamels - Sliding friction wear test using an abrasion wheel
- DIN 51191:2015 Vitreous and porcelain enamels - Sliding friction wear test using an abrasion wheel
- DIN EN ISO 21546:2021-02 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019); German version EN ISO 21546:2020
- DIN 1496:1996 Plain bearings - Testing of friction and wear of precision engineering bearings in the SLPG-Tester
- DIN 51834-2:2010 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2: Determination of friction and wear data for lubricating oils
- DIN 51834-2:2017 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2: Determination of friction and wear data for lubricating oils
- DIN 51834-2:2004 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2: Determination of friction and wear data for lubricating oils
- DIN 51834-2:2017-05 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2: Determination of friction and wear data for lubricating oils
- DIN 51834-4:2012 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 4: Determination of friction and wear data for lubricating oils with the cylindrical roller-disk geometry
- DIN EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019); German version EN ISO 21546:2020
- DIN 53109:1993 Testing of paper and board; determination of abrasion by the abrasion wheel method
- DIN 55654:2015-08 Scratch test using a linear abrasion tester (crockmeter)
- DIN EN 60068-2-70:1996 Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (IEC 60068-2-70:1995); German version EN 60068-2-70:1996
Professional Standard - Machinery, Ball friction and wear test
Danish Standards Foundation, Ball friction and wear test
- DS/EN ISO 21546:2020 Paints and varnishes – Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
- DS/EN 60068-2-70:1997 Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
PL-PKN, Ball friction and wear test
- PN-EN ISO 21546-2021-06 E Paints and varnishes--Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
BELST, Ball friction and wear test
- STB 1448-2004 Tribo-fatigue. Wear-fatigue test methods. Mechano-sliding fatigue tests
- STB 1233-2000 Tribo-fatigue. Wear-fatigue tests methods. Accelerated mechano-rolling fatigue tests
British Standards Institution (BSI), Ball friction and wear test
- BS EN ISO 21546:2020 Paints and varnishes. Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
- BS 3424-14:1985 Testing coated fabrics - Method 16 - Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear
- BS ISO 18535:2016 Diamond-like carbon films. Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
- BS EN 60068-2-70:1996 Environmental testing. Test methods. Test Xb. Abrasion of markings and letterings caused by rubbing of fingers and hands
- BS ISO 26866:2010 Road vehicles. Brake lining friction materials. Standard wear test procedure for commercial vehicles with air brakes
- BS ISO 26866:2009 Road vehicles - Brake lining friction materials - Standard wear test procedure for commercial vehicles with air brakes
- BS ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
Professional Standard - Petrochemical Industry, Ball friction and wear test
- NB/SH/T 0847-2010 Standard test method for measuring friction and wear properties of extreme pressure(EP)lubricating oils using SRV test machine
- SH/T 0721-2002 Standard test method for measuring friction and wear properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine
National Metrological Technical Specifications of the People's Republic of China, Ball friction and wear test
- JJF(建材)147-2018 Calibration Standard for Small Sample Shrinkage Inertia Friction and Wear Performance Testing Machines
- JJF(建材) 147-2018 Calibration specification for small scale inertial friction and wear performance testing machine
RU-GOST R, Ball friction and wear test
- GOST 17367-1971 Metalls. Method of abrasion test by friction against embedded abragant grain
- GOST 23.211-1980 Products wear resistance assuring. Testing of materials for wear under fretting and fretting-corrosion conditions
- GOST 23.208-1979 Ensuring of wear resistance of products. Wear resistance testing of materials by friction against loosely fixed abrasive particles
- GOST 23.216-1984 Ensuring of wear resistance of products. Method of testing materials for wear and friction applying oil-refrigerant mixtures as lubricants
CH-SNV, Ball friction and wear test
- SN EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
Lithuanian Standards Office , Ball friction and wear test
- LST EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
国家市场监督管理总局、中国国家标准化管理委员会, Ball friction and wear test
- GB/T 40398.1-2021 Test method for C-C composites—Part 1: Friction and wear property
- GB/T 38074-2019 Standard test method for determining the friction and wear properties of manual transmission fluid using a high-frequency—Linear-oscillation（SRV）test machine
National Metrological Verification Regulations of the People's Republic of China, Ball friction and wear test
- JJG 373-1997 Verification Regulation of Four-ball Friction Testing Machine
European Committee for Standardization (CEN), Ball friction and wear test
- EN ISO 21546:2020 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
- EN 1071-12:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
JSAE - Society of Automotive Engineers of Japan@ Inc., Ball friction and wear test
- JASO C427-1983 Wear Test Procedure on Inertia Dynamometer- Brake Friction Materials
ES-UNE, Ball friction and wear test
- UNE-EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
Professional Standard - Energy, Ball friction and wear test
- NB/SH/T 0721-2016 Determination of Friction and Wear Properties of Lubricating Grease High Frequency Linear Vibration Tester (SRV) Method
国家能源局, Ball friction and wear test
- SH/T 0721-2016 Determination of friction and wear properties of grease using high-frequency linear vibration tester (SRV) method
RO-ASRO, Ball friction and wear test
- STAS SR ISO 7148/1:1985 Plain bearings. Testing of the tribological behaviour of bearing materials. Part 1: Testing of the friction and wear behaviour of bearing material/mating material/oii combinations unde*' conditions of boundary lubrification
Standard Association of Australia （SAA）, Ball friction and wear test
- AS 1141.42:1999 Methods for sampling and testing aggregates - Pendulum friction test
- AS 60068.2.70:2003 Environmental testing - Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
Japanese Industrial Standards Committee (JISC), Ball friction and wear test
- JIS C 60068-2-70:2007 Environmental testing -- Part 2: Tests -- Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Ball friction and wear test
- ASHRAE 3907-1995 Screening Lubricants for Refrigerant Compressors: A Comparison Between a Pin and Block Tester and the High-Pressure Tribometer
Professional Standard - Textile, Ball friction and wear test
- FZ/T 01151-2019 Test method for abrasion resistance of textile fabrics Accelerated friction method
American National Standards Institute （ANSI), Ball friction and wear test
- ANSI/ASSE TR-A1264.3-2007 Technical Report: Using Variable Angle Tribometers (VAT) for Measurement of the Slip Resistance of Walkway Surfaces
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Ball friction and wear test
- PREN 4860-2018 Aerospace series Environmental testing Test Xb: Abrasion of markings@ letterings@ surfaces and materials caused by rubbing of fingertips and hands (Edition P 1)
GM Daewoo, Ball friction and wear test
International Electrotechnical Commission (IEC), Ball friction and wear test
- IEC 60068-2-70:1995 Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
American Gear Manufacturers Association, Ball friction and wear test
- AGMA 14FTM14-2014 Theoretical and Experimental Study of the Frictional Losses of Radial Shaft Seals for Industrial Gearbox
AGMA - American Gear Manufacturers Association, Ball friction and wear test
- 14FTM14-2014 Theoretical and Experimental Study of the Frictional Losses of Radial Shaft Seals for Industrial Gearbox