ZH
RU
ES

Flow type e6 working temperature and humidity

Flow type e6 working temperature and humidity, Total:122 items.

In the international standard classification, Flow type e6 working temperature and humidity involves: Thermodynamics and temperature measurements, Packaging and distribution of goods in general, Industrial automation systems, On-board equipment and instruments, Occupational safety. Industrial hygiene, Ergonomics, Burners. Boilers, Electrical engineering in general, Electronic components in general, Environmental testing, Insulating materials, Electrical accessories, Aerospace electric equipment and systems, Electrical wires and cables, Fluid storage devices, Rubber and plastics products, Road vehicle systems, Installations in buildings, Seals, glands.

Indonesia Standards, Flow type e6 working temperature and humidity

SNI 16-7061-2004 The measurement of work climates (hot) by wet bulb globe temperature index parameters
SNI 04-4189-1996 Operational condition for measuring and industrial process control instruments - Part 1: Temperature, humidity and barometric pressure

Inner Mongolia Provincial Standard of the People's Republic of China, Flow type e6 working temperature and humidity

DB15/T 1176-2017 Operational Specifications for Temperature and Humidity Monitoring of Drug Cold Chain in Pharmaceutical Logistics

YU-JUS, Flow type e6 working temperature and humidity

JUS L.N4.201-1984 Operating conditions for industrial-process measurement and control equipment. Temperature, humidity and barometric pressure

Professional Standard - Electron, Flow type e6 working temperature and humidity

SJ/Z 9107.1-1987 Operating conditions for industrial-process measurement and control equipment Part 1: Temperature, humidity and atmospheric pressure

European Committee for Electrotechnical Standardization（CENELEC）, Flow type e6 working temperature and humidity

HD 413.1-1980 Operating Conditions for Industrial - Process Measurement and Control Equipment Part 1: Temperature Humidity and Barometric Pressure

International Organization for Standardization (ISO), Flow type e6 working temperature and humidity

ISO 9662:1994 Aircraft equipment; environmental and operating conditions for airborne equipment; humidity, temperature and pressure tests
ISO 4927:1978 Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C maximum)
ISO 7633:1985 Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
ISO 7630:1985 Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
ISO 6117:2005 Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.)
ISO 4927:2005 Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
ISO 6117:1980 Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
ISO 4930:2006 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150° C max.)
ISO 6119:2006 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
ISO 6119:1980 Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
ISO 4930:1978 Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
ISO 7632:1985 Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

Japanese Industrial Standards Committee (JISC), Flow type e6 working temperature and humidity

JIS W 0814:2002 Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests

European Committee for Standardization (CEN), Flow type e6 working temperature and humidity

HD 413.1 S1-1981 Operating conditions for industrial-process measurement and control equipment; part 1: temperature, humidity and barometric pressure
EN 3646-001:2007 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
EN 4165-002:2015 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements
EN 3682-006:2013 Aerospace series - Connectors@ plug and receptacle@ electrical@ rectangular@ interchangeable insert type@ rack to panel@ operating temperature 150 ��continuous - Part 006: Size 3 receptacle - Product standard
EN 3682-008:2013 Aerospace series - Connectors@ plug and receptacle@ electrical@ rectangular@ interchangeable insert type@ rack to panel@ operating temperature 150 ��continuous - Part 008: Size 4 receptacle - Product standard
EN 3682-005:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 癈 continuous - Part 005: Size 2 plug - Product standard
EN 3682-007:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 癈 continuous - Part 007: Size 3 plug - Product standard
EN 3682-009:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 癈 continuous - Part 009: Size 4 plug - Product standard

Defense Logistics Agency, Flow type e6 working temperature and humidity

DLA MIL-DTL-28788/1 D-2010 SWITCHES, LIQUID FLOW, SINGLE POLE, DOUBLE THROW (SPDT), 3 AMPERES, OPERATING TEMPERATURE (32 DEGREES F to 185 DEGREES F)

Association Francaise de Normalisation, Flow type e6 working temperature and humidity

NF X35-201:1994 Hot environments. Estimation of the heat stress on working man, based on the wbgt-index (wet bulb globe temperature).
NF R12-648*NF ISO 7633:1987 Road vehicles. Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max).
NF L54-130:1987 Connectors, electrical, circular, bayonnet coupling. Operating temperature 200 degrees C continuous duty. Light weight shell, type 6.
NF R12-647*NF ISO 7632:1987 Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max).
NF ISO 7633:1987 Véhicules routiers - Capuchons en caoutchouc pour cylindres de roue de freins hydrauliques à tambour utilisant un liquide de frein à base pétrolière (température maximale d'utilisation 120 degrés Celsius)
NF ISO 7632:1987 Véhicules routiers - Joints en caoutchouc pour cylindres de freins hydrauliques à disque utilisant un liquide de frein à base pétrolière (température maximale d'utilisation 120 degrés Celsius)
NF M88-531-1*NF EN 14620-1:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0oC and -165oC - Part 1 : general
NF ISO 7630:1987 Véhicules routiers - Joints toriques à section circulaire en caoutchouc pour cylindres de roue de freins hydrauliques à tambour utilisant un liquide de frein à base pétrolière (température maximale d'utilisation 120 degrés Celsius)
NF E31-356/IN1*NF EN 14394/IN1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 oC
NF M88-531-4*NF EN 14620-4:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 oC and -165 oC - Part 4 : insulation components.
NF M88-531-2*NF EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0oC and -165oC - Part 2 : metallic components
NF M88-531-3*NF EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0oC and -165oC - Part 3 : concrete components
NF L54-110-024:2011 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 024 : single module plug - Product standard.
NF L54-110-026:2011 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 026 : accessories for single modules - Product standard.
NF L54-110-025:2012 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 025 : module receptacle - Product Norm.
NF L54-146-010*NF EN 3646-010:2015 Aeospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175oC or 200oC continuous - Part 010 : protective cover for plug - Product standard
NF M88-531-5*NF EN 14620-5:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0oC and -165oC - Part 5 : testing, drying, purging and cool-down
NF L52-010-007*NF EN 6049-007:2013 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007 : self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from - 55 oC to 260 oC - Product standard
NF L54-146-008*NF EN 3646-008:2006 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 oC or 200 oC continuous - Part 008 : plug - Product standard
NF EN 3646-008:2006 Série aérospatiale - Connecteurs électriques circulaires, accouplement par baïonnettes, température d'utilisation 175 oC ou 200 oC continu - Partie 008 : fiche - Norme de produit
NF R12-645*NF ISO 7630:1987 Road vehicles. Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.).

Lithuanian Standards Office , Flow type e6 working temperature and humidity

LST EN 27243-2001 Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989)

German Institute for Standardization, Flow type e6 working temperature and humidity

DIN EN 27243:1993 Hot environments; estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989); German version EN 27243:1993
DIN EN 3646-001:2016-03 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification; German and English version EN 3646-001:2015
DIN EN 3646-008:2007 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 008: Plug - Product standard; German and English version EN 3646-008:2006
DIN EN 3646-009:2015-09 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle - Product standard; German and English version EN 3646-009:2015
DIN EN 3646-010:2015-09 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Product standard; German and English version EN 3646-010:2015

Danish Standards Foundation, Flow type e6 working temperature and humidity

DS/ISO 7243:1994 Ergonomics - Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
DS 2323:1986 Ergonomics. hot environments. Estimation of the heat stress on working, man based on the WBGT-index (wet bulb globe temperature)

CZ-CSN, Flow type e6 working temperature and humidity

CSN 25 7808-1963 Volumetric -water meters, dry — dial pattern; up-to 30 °C and operating pressure 10 kp/cmJ
CSN 25 7803-1963 Single — flow water meters, dry dial pattern; up-to 30 °C and operating pressure 10 kp/cm2
CSN ISO 7243:1993 Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
CSN IEC 68-2-38:1992 Electrotechnical and electronic products. Basic environmental testing procedures. Part 2-38: Test Z/AD: Composite temperature/humidity cyclic test

Korean Agency for Technology and Standards (KATS), Flow type e6 working temperature and humidity

KS A ISO 7243-2005(2021) Hot environments－Estimation of the heat stress on working man, based on the WBGT－index(wet bulb globe temperature)
KS B 6203-2002(2022) Maximum working pressure and super heated steam temperature of stationary steam boilers
KS W 0932-1998(2003) Aerospace-Self-locking, fixed, single-lug anchor nuts,reduced series, with counterbore, strength classification 1100MPa and maximum operating temperature 235 degrees C
KS R ISO 4927:2009 Road vehicles－Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid(Service temperature 120 ℃ maximum)
KS R ISO 7633-2015(2020) Road vehicles－Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid(service temperature 120℃ maximum)
KS R ISO 7633:2005 Road vehicles-Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid(service temperature 120℃ maximum)
KS R ISO 4927-2009(2019) Road vehicles－Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid(Service temperature 120 ℃ maximum)
KS R ISO 6117:2009 Road vehicles-Elastomeric boots for drum type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid(Service temperature 100 ℃ maximum)
KS R ISO 7630:2008 Road vehicles－Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 ℃ max.)
KS R ISO 6119-2009(2019) Road vehicles－Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 ℃ maximum)
KS R ISO 4930-2015(2020) Road vehicles－Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid(Service temperature 150 ℃ maximum)
KS R ISO 7630-2008(2018) Road vehicles－Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 ℃ max.)
KS R ISO 6119:2009 Road vehicles－Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 ℃ maximum)
KS R ISO 4930:2009 Road vehicles-Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid(Service temperature 150 ℃ maximum)

BE-NBN, Flow type e6 working temperature and humidity

NBN X 10-003-1986 Warme Umgebung - Bestimmung der Warme EngigkeitThermal environments - Determination of thermal stress

VN-TCVN, Flow type e6 working temperature and humidity

TCVN 7112-2002 Ergonomics.Hot environments.Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)

AT-ON, Flow type e6 working temperature and humidity

ONORM EN 27243-1994 Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989)

American National Standards Institute （ANSI), Flow type e6 working temperature and humidity

ANSI/ASTM D4245:2002 Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation
ANSI/ASHRAE 23.1P-2010 Methods of Testing for Rating the Performance of Positive Displacement Refrigerant Compressors and Condensing Units That Operate at Subcritical Temperatures of the Refrigerant

Aerospace, Security and Defence Industries Association of Europe (ASD), Flow type e6 working temperature and humidity

ASD-STAN PREN 2997-008-2005 Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, Fire Resistant or Non Fire-Resistant, Operating Temperatures - 65 Degrees to 175 Degrees C Continuous, 200 Degrees C Continuous, 260 Degrees C Peak Part 008: Plug Product Standar
ASD-STAN PREN 2997-001-2010 Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 Degrees C to 175 Degrees C continuous, 200 Degrees C continuous, 260 Degrees C peak Part 001: Technical specific
ASD-STAN PREN 2997-015-2009 Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 degree C to 175 degree C continuous, 200 degree C continuous, 260 degree C peak Part 015: Jam-nut mounted recept
ASD-STAN PREN 2997-016-2009 Aerospace series Connectors, electrical, circular, coupled be threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 degree C to 175 degree C continuous, 200 degree C continuous, 260 degree C peak Part 016: Plug with integrated a
ASD-STAN PREN 2997-011-2009 Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 degree C to 175 degree C continuous, 200 degree C continuous, 260 degree C peak Part 011: Dummy receptacle Produ
ASD-STAN PREN 2997-002-2010 Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, Fire-Resistant or Non Fire-Resistant, Operating Temperatures - 65 Degrees C to 175 Degrees C Continuous, 200 Degrees C Continuous, 260 Degrees C Peak Part 002: Specification of
ASD-STAN PREN 2997-012-2006 Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak Part 012: Jam-nut for jam-nut receptacles Product standa
ASD-STAN PREN 2997-013-2006 Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak Part 013: O’ring seal for jam-nut receptacles Product st

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Flow type e6 working temperature and humidity

ASHRAE HI-02-6-4-2002 Field Measurements of Operative Temperatures in Buildings Heated or Cooled by Embedded Water-Based Radiant Systems

International Electrotechnical Commission (IEC), Flow type e6 working temperature and humidity

IEC 60246:1967 Connecting wires having a rated voltage of 20 kV and 25 kV d.c. and a maximum working temperature of 105 °C for use in television receivers

American Society for Testing and Materials (ASTM), Flow type e6 working temperature and humidity

ASTM D4245-08 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90176C Dry/75176C Wet Operation
ASTM D4245-08(2013) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90deg;C Dry/75deg;C Wet Operation

TR-TSE, Flow type e6 working temperature and humidity

TS 1847-1975 CONNECTING WIRES (FOR USE ?N TELE VISION RECEIVERS) (FOR A RATED VOLTAGE OF 20 kV AND 25 kV D.C. AND A MAXIMUM WORKING TEMPERATURE OF 105°C)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Flow type e6 working temperature and humidity

PREN 3645-003-1996 Aerospace Series Connectors@ Electrical@ Circular@ Scoop-Proof@ Triple Start Threaded Coupling Operating Temperatures 175 Degrees C or 200 Degrees C Continuous Part 003 - Wall-Mount Receptacle Product Standard (Edition: 11E)
PREN 6047-001-1995 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ for High Current Operating Temperature + 200 Degrees Celsius Continuous@ and Fire Resistant Part 001 - Technical Specification (Edition P1)
PREN 6047-004-1995 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ for High Current Operating Temperature + 200 Degrees Celsius Continuous@ and Fire Resistant Part 004 - Plug Product Standard (Edition P1)
PREN 4626-001-2006 Aerospace series Connectors@ optical@ rectangular@ multicontact@ rack and panel@ Quadrax cavity@ 2@5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 001: Technical specification (Edition P 1
PREN 4626-004-2006 Aerospace series Connectors@ optical@ rectangular@ multicontact@ rack and panel@ Quadrax cavity@ 2@5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 004: Adaptor for receptacle (Edition P 1)
PREN 4611-007-2004 Aerospace series Cables@ electrical@ for general purpose@ single and multicore assembly XLETFE Family Part 007: Nickel plated copper Operating temperatures@ between - 65 Degrees Celsius and 150 Degrees Celsius Dual extruded wall for open applications UV l
PREN 4611-006-2004 Aerospace series Cables@ electrical@ for general purpose@ single and multicore assembly XLETFE Family Part 006: Silver plated copper Operating temperatures@ between - 65 Degrees Celsius and 150 Degrees Celsius Dual extruded wall for open applications UV l
PREN 4611-008-2004 Aerospace series Cables@ electrical@ for general purpose@ single and multicore assembly XLETFE Family Part 008: BP - Nickel plated cooper Operating temperatures@ between - 65 Degrees Celsius and 150 Degrees Celsius Dual extruded wall for open applications

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Flow type e6 working temperature and humidity

ASHRAE 23.1-2010 Methods of Testing for Rating the Performance of Positive Displacement Refrigerant Compressors and Condensing Units that Operate at Subcritical Temperatures of the Refrigerant

British Standards Institution (BSI), Flow type e6 working temperature and humidity

BS EN 3646-001:2007 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
BS EN 3646-001:2015 Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous. Technical specification
BS EN 3682-009:2006 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 009: Size 4 plug - Product standard
BS EN 3682-009:2013 Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuous. Size 4 plug. Product standard
BS ISO 4930:2006 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 °C max.)
BS ISO 6117:2005 Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100?C max.)
BS ISO 4927:2005 Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.)
BS EN 3682-002:2013 Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150°C continuous. Specification of performance and contact arrangements
BS EN 3682-004:2012 Aerospace series. Connectors, plug and receptacle, electrical, rect angular, interchangeable insert type, rack to panel, operatingtemperatur e 150°C continuous. Size 2 receptacle. Product standard
BS EN 3682-001:2006 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Technical specification
BS EN 3682-001:2007 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Technical specification

ZA-SANS, Flow type e6 working temperature and humidity

SANS 206:2003 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 鳦 max.)
SANS 206:2009 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
SANS 4930:2003 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 鳦 max.)
SANS 4930:2009 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 °C max.)

CEN - European Committee for Standardization, Flow type e6 working temperature and humidity

EN 3682-005:2006 Aerospace series - Connectors@ plug and receptacle@ electrical@ rectangular@ interchangeable insert type@ rack to panel@ operating temperature 150 °C continuous - Part 005: Size 2 plug - Product standard
EN 3682-009:2006 Aerospace series - Connectors@ plug and receptacle@ electrical@ rectangular@ interchangeable insert type@ rack to panel@ operating temperature 150 °C continuous - Part 009: Size 4 plug - Product standard
EN 3682-007:2006 Aerospace series - Connectors@ plug and receptacle@ electrical@ rectangular@ interchangeable insert type@ rack to panel@ operating temperature 150 °C continuous - Part 007: Size 3 plug - Product standard
EN 3682-006:2006 Aerospace series - Connectors@ plug and receptacle@ electrical@ rectangular@ interchangeable insert type@ rack to panel@ operating temperature 150 °C continuous - Part 006: Size 3 receptacle - Product standard
EN 3682-008:2006 Aerospace series - Connectors@ plug and receptacle@ electrical@ rectangular@ interchangeable insert type@ rack to panel@ operating temperature 150 °C continuous - Part 008: Size 4 receptacle - Product standard