ZH
RU
ES

split peak

split peak, Total:71 items.

In the international standard classification, split peak involves: Medical equipment, Applications of information technology, Ferrous metals, Construction materials, Water quality, Testing of metals, Industrial automation systems, Aerospace electric equipment and systems, Lubricants, industrial oils and related products, Adhesives, Products of the textile industry, Valves, Plant and equipment for the food industry, Radiation measurements, Conducting materials.

ESDU - Engineering Sciences Data Unit, split peak

TD MEMO 6511 A-1969 A method for estimating the pressure distribution between the crest and the trailing edge on the surface of an aerofoil section in a sonic stream.
ESDU 73012-1973 Method for predicting the pressure distribution on swept wings with subsonic attached flow.
ESDU 91021-1991 A method of estimating a flow breakdown boundary for aerofoils and swept wings in transonic flow.
AERO B.S.05.03.01 A-1980 Pressure distribution on forebodies and afterbodies of revolution at zero incidence in inviscid flow.

ES-UNE, split peak

UNE-EN ISO 11073-10421:2012 Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) (ISO 11073-10421:2012) (Endorsed by AENOR in January of 2013.)
IEEE 11073-10421-2023 IEEE Standard--Health Informatics--Device Interoperability--Part 10421: Personal Health Device Communication--Device Specialization--Peak expiratory flow monitor (peak flow)
UNE-EN IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires (Endorsed by Asociación Española de Normalización in October of 2018.)

Danish Standards Foundation, split peak

DS/EN ISO 11073-10421:2013 Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow)
DS/ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection

Association Francaise de Normalisation, split peak

NF S97-518-10421*NF EN ISO 11073-10421:2013 Health informatics - Personal health device communication - Part 10421 : device specialization - Peak expiratory flow monitor (peak flow)
NF EN ISO 11073-10421:2013 Informatique de santé - Communication entre dispositifs de santé personnels - Partie 10421 : spécialisation des dispositifs - Moniteur de surveillance du débit expiratoire de pointe (débit de pointe)
NF L58-100-309*NF EN 2349-309:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 309 : exported spikes
NF C31-888-24*NF EN IEC 61788-24:2018 Superconductivity - Part 24 : critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
NF EN IEC 61788-24:2018 Supraconductivité - Partie 24 : mesurage du courant critique - Courant critique retenu après double flexion à température ambiante des fils supraconducteurs Bi-2223 avec gaine Ag

German Institute for Standardization, split peak

DIN EN ISO 11073-10421:2013-03 Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) (ISO 11073-10421:2012); English version EN ISO 11073-10421:2012
DIN EN ISO 11073-10421:2013 Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) (ISO 11073-10421:2012); English version EN ISO 11073-10421:2012
DIN EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens English version of DIN EN 14488-3:2006-09
DIN EN 2349-309:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes; German and English version EN 2349-309:2006
DIN 51589-1:1991-03 Determination of water separation ability of lubricating oils and low-flammability fluids after contact with steam
DIN 51368:1990 Determination of fraction separated by hydrochloric acid from water mix metal working fluids
DIN 53800-1:2003 Textiles - Determination of commercial mass - Part 1: Determination of dry mass by dessication in hot air

Institute of Electrical and Electronics Engineers (IEEE), split peak

IEEE/ISO 11073-10421-2010 IEEE Standard - Health informatics--Personal health device communication Part 10421: Device specialization--Peak expiratory flow monitor (peak flow)
IEEE Std 11073-10421-2010 IEEE Standard - Health informatics--Personal health device communication Part 10421: Device specialization--Peak expiratory flow monitor (peak flow)
IEEE Unapproved Draft Std P11073-10421, D6, Oct 20 Draft International Standard Health informatics--Personal health device communication --Part 10421 Device specialization --Peak expiratory flow monitor (peak flow)
IEEE Unapproved Draft Std P11073-10421, D6, Oct 2009 Draft International Standard Health informatics--Personal health device communication --Part 10421 Device specialization --Peak expiratory flow monitor (peak flow)
IEEE P11073-10421/D3, November 2022 IEEE Draft Standard for Health Informatics--Device Interoperability--Part 10421: Personal Health Device Communication--Device Specialization--Peak expiratory flow monitor (peak flow)
IEEE P11073-10421 IEEE Approved Draft Standard for Health Informatics--Device Interoperability--Part 10421: Personal Health Device Communication--Device Specialization--Peak expiratory flow monitor (peak flow)
IEEE P11073-10421/D4, January 2023 IEEE Approved Draft Standard for Health Informatics--Device Interoperability--Part 10421: Personal Health Device Communication--Device Specialization--Peak expiratory flow monitor (peak flow)

Lithuanian Standards Office , split peak

LST EN ISO 11073-10421:2013 Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) (ISO 11073-10421:2012)
LST EN 10036-2000 Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen

Korean Agency for Technology and Standards (KATS), split peak

KS D ISO 15349-1-2005(2015) Unalloyed steel－Determination of low carbon content－Part 1：Infrared absorption method after combustion in an electric resistance furnace(by peak separation)
KS X ISO/IEEE 11073-10421-2015(2020) Health informatics — Personal health device communication — Part 10421: Device specialization — Peak expiratory flow monitor(peak flow)
KS X ISO/IEEE 11073-10421:2015 Health informatics — Personal health device communication — Part 10421: Device specialization — Peak expiratory flow monitor(peak flow)
KS C IEC 61788-24:2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

European Committee for Standardization (CEN), split peak

EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN 2349-309:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes
EN 10036:1989 Chemical Analysis of Ferrous Materials Determination of Total Carbon in Steels and Irons Gravimetric After Combustion in a Stream of Oxygen

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., split peak

IEEE 11073-10421-2010 Health informatics—Personal health device communication Part 10421: Device specialization—Peak expiratory flow monitor (peak flow)

American Society for Testing and Materials (ASTM), split peak

ASTM D7284-13(2017) Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
ASTM D7284-20 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection

Japanese Industrial Standards Committee (JISC), split peak

JIS G 1211-4 AMD 1:2013 Iron and steel.Determination of carbon content.Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 1)
JIS G 1211-4 AMD 2:2017 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 2)
JIS G 1211-4:2011 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating
JIS G 1228-3:2022 Iron and steel -- Determination of nitrogen -- Part 3: Thermal conductimetric method after fusion in a current of inert gas

International Organization for Standardization (ISO), split peak

ISO/IEEE 11073-10421:2012 Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow)
ISO/TS 17951-1:2016 Water quality - Determination of fluoride using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection

GOSTR, split peak

GOST R 57847-2017 Health informatics. Personal health device communication. Part 10421. Device specialization. Peak expiratory flow monitor

Professional Standard - Machinery, split peak

JB/T 13071.4-2017 Electrical equipment and system of NC machine tools.Performance test specification of torque motor.Part 4: Peak stall current

British Standards Institution (BSI), split peak

BS EN 2349-309:2007 Aerospace series - Requirements and test procedures for relays and contactors - Exported spikes
BS EN 2349-309:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes
BS PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
BS 5350-B9:1984 Methods of test for adhesives - Adhesives - Determination of resistance to sagging (flow after application)
PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
15/30287666 DC BS ISO 17951-1. Water quality. Determination of fluoride using flow analysis (FIA and CFA). Part 1. Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation

TR-TSE, split peak

TS 601-1972 CHEMICAL ANALYSIS OF STEELS DETERMINATION OP TOTAL CABBON (GRAVIMETKIC METHOD APTER COMBUSTION ?N A STREAM OP OXYGEN)
TS 680-1969 CHEMICAL ANALYSIS OF STEEL AND CAST IRON DETERMINATION OF SULPHUR (Method After Combustion in Acurrent of Oxygen, and Titration vvith Sodium Borate)

ZA-SANS, split peak

ARP 099-3-2007 Business process outsourcing and offshoring operations Part 3: Back-office processing operations

International Electrotechnical Commission (IEC), split peak

IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
IEC 60951-4:1991 Radiation monitoring equipment for accident and post-accident conditions in nuclear power plants; part 4: process stream in light water nuclear power plants

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, split peak

ITU-T H.845.11-2017 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 5K: Peak expiratory flow monitor (Study Group 16)
ITU-T H.845.11-2016 Conformance of ITU-T H.810 personal health devices: PAN/LAN/TAN interface Part 5K: Peak expiratory flow monitor: Agent (Study Group 16)

American National Standards Institute （ANSI), split peak

ANSI/ASSE 1032-2011 Performance Requirements for Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers, Post Mix Type

American Industrial Hygiene Association （AIHA), split peak

ASSE 1032-1980 Performance Requirements for Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers - Post Mix Types

Professional Standard - Nuclear Industry, split peak

EJ/T 20150.14-2018 Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 14: Eddy Current Inspection of Fuel Rods

International Telecommunication Union (ITU), split peak

ITU-T H.845.11-2015 Conformance of ITU-T H.810 personal health devices: PAN/LAN/TAN interface Part 5K: Peak expiratory flow monitor: Agent (Study Group 16)

ETSI - European Telecommunications Standards Institute, split peak

TS 103 222-3-2015 Speech and multimedia Transmission Quality (STQ); Reference benchmarking@ background traffic profiles and KPIs; Part 3: Reference benchmarking@ background traffic profiles and KPIs for UMTS and VoLTE (V1.1.1)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, split peak

GB/T 12726.4-1995 Radiation monitoring equipment for accident and post-accident conditions in nuclear power plants. Part 4: Process stream radiation monitor

European Committee for Electrotechnical Standardization（CENELEC）, split peak

EN IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

KR-KS, split peak

KS C IEC 61788-24-2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

SE-SIS, split peak

SIS SS-EN 10 036-1989 Chemical analysis of ferrous materials — Determination of total carbon in steels and irons — Gravimetric method after combus- tion in a stream of oxygen