ZH
RU
ES

Spectrophotometer Requirements

Spectrophotometer Requirements, Total:498 items.

In the international standard classification, Spectrophotometer Requirements involves: Road engineering, Lighting, Optics and optical measurements, Analytical chemistry, Water quality, Raw materials for rubber and plastics, Metalliferous minerals, Lamps and related equipment, Non-ferrous metals, Coals, Surface treatment and coating, Ferroalloys, Ferrous metals, Particle size analysis. Sieving, Optical equipment, Leather technology, Non-metalliferous minerals, Graphic technology, Air quality, Optoelectronics. Laser equipment, Inorganic chemicals, Testing of metals, Fertilizers, Paints and varnishes, Solar energy engineering, General methods of tests and analysis for food products, Biology. Botany. Zoology, Medical equipment, Organic chemicals, Pulps, Fruits. Vegetables, Cycles, Products of the chemical industry, Radiation measurements, Metrology and measurement in general, Materials for aerospace construction, Petroleum products in general, Paper and board, Shipbuilding and marine structures in general, Iron and steel products, Paint ingredients, Radiation protection, Safety of machinery, Electronic components in general, Ceramics, Glass, Telecommunication systems, Hand-held tools, Wastes, Galvanic cells and batteries, Plastics, Fibre optic communications, Fuels.

CU-NC, Spectrophotometer Requirements

NC 90-13-21-1984 Metrological Assurance. Spectrophotometers. Reference Dissolutions for the Verification of Spectrophotometers
NC 33-70-1987 Oil Industry. Determination of Naphtalenic Hydrocarbon Content in Turbofuels. Spectrophotometer Method

German Institute for Standardization, Spectrophotometer Requirements

DIN 67520:2008 Retro-reflecting materials for traffic safety - Photometric minimum requirements for retro-reflective sheetings
DIN 5032-7:1985 Photometry; classification of illuminance meters and luminance meters
DIN 58963-2:1983-11 Optical cells for photometric measurements; precision rectangular spectrophotometric cells; dimensions, requirements
DIN 58963-3:1993-11 Optical cells for photometric measurements; disposable rectangular spectrophotometric cells; dimensions, requirements
DIN 5032-7:2017 Photometry - Part 7: Classification of illuminance meters and luminance meters
DIN 58963-2:1983 Optical cells for photometric measurements; precision rectangular spectrophotometric cells; dimensions, requirements
DIN 58963-3:1993 Optical cells for photometric measurements; disposable rectangular spectrophotometric cells; dimensions, requirements
DIN 58960-4:1991-01 Photometer for analytical tests; requirements for the description of technical data for the user
DIN 67520:2013 Retro-reflecting materials for traffic safety - Photometric minimum requirements for retro-reflective sheetings
DIN 5032-7:2016 Photometry - Part 7: Classification of illuminance meters and luminance meters
DIN 58960-3:1988-05 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
DIN 5032-7:2017-02 Photometry - Part 7: Classification of illuminance meters and luminance meters
DIN 58960-3:1988 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
DIN 20610:1994 Lighting of mine locomotives; position lamps; design features, photometric requirements
DIN 67520-2:1994 Retro-reflecting materials for traffic safety; photometric minimum requirements for retro-reflective sheetings for traffic signs
DIN ISO 9211-8:2020-11 Optics and photonics - Optical coatings - Part 8: Minimum requirements for coatings used for laser optics (ISO 9211-8:2018)
DIN 58197-4:2007 Optical coatings - Part 4: Minimum requirements for coatings used for laser optics
DIN ISO 10109-7:2002 Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring systems (ISO 10109-7:2001)
DIN ISO 9211-8:2020 Optics and photonics - Optical coatings - Part 8: Minimum requirements for coatings used for laser optics (ISO 9211-8:2018)
DIN 20609:1993 Lighting of mine locomotives; head lamps; design features, photometric requirements, meters and measurements
DIN ISO 9211-6:2020-07 Optics and photonics - Optical coatings - Part 6: Minimum requirements for reflecting coatings (ISO 9211-6:2018)
DIN ISO 10109-12:2005 Optics and optical instruments - Environmental requirements - Part 12: Conditions of transport for optical instruments (ISO 10109-12:2004)
DIN ISO 9211-5:2020-07 Optics and photonics - Optical coatings - Part 5: Minimum requirements for antireflecting coatings (ISO 9211-5:2018)
DIN EN 17871:2022 Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool; German and English version prEN 17871:2022
DIN EN 17871:2022-12 Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool; German and English version prEN 17871:2022 / Note: Date of issue 2022-11-18
DIN ISO 9211-7:2020 Optics and photonics - Optical coatings - Part 7: Minimum requirements for neutral beam splitting coatings (ISO 9211-7:2018)
DIN ISO 10109-4:2002 Optics and optical instruments - Environmental requirements - Part 4: Test requirements for telescopic systems (ISO 10109-4:2001)
DIN 58197-4:2015 Optical coatings - Part 4: Minimum requirements for coatings used for laser optics; Text in German and English
DIN ISO 9211-6:2020 Optics and photonics - Optical coatings - Part 6: Minimum requirements for reflecting coatings (ISO 9211-6:2018)
DIN ISO 9211-5:2020 Optics and photonics - Optical coatings - Part 5: Minimum requirements for antireflecting coatings (ISO 9211-5:2018)
DIN EN ISO 9342-1:2022-07 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/DIS 9342-1:2022); German and English version prEN ISO 9342-1:2022 / Note: Date of issue 2022-0...
DIN 8318:1984 Radioluminescent deposits used for horological instruments; terms, requirements, testing
DIN EN ISO 9342-1:2005-08 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005); German version EN ISO 9342-1:2005 / Note: To be replaced by DIN EN ISO 9342-1 (2022-07).
DIN 67520-4:2005 Retroreflecting materials for traffic safety - Part 4: Photometric minimum requirements for retroreflective sheeting of microprismatic constructions
DIN ISO 10109-11:2002 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use (ISO 10109-11:2001)
DIN 58197-3:2002 Optical coatings - Part 3: Minimum requirements for neutral beam splitting coatings
DIN EN ISO 9342-2:2006-02 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005); German version EN ISO 9342-2:2005
DIN 58960-1:1988-05 Photometers for analytical tests; used physical-chemical basic processes
DIN EN 16584-3:2022 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics; German and English version prEN 16584-3:2022
DIN EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics
DIN EN 16584-3:2017-03 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics; German version EN 16584-3:2017 / Note: To be replaced by DIN EN 16584-3 (2022-06).
DIN EN 16584-3:2022-06 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics; German and English version prEN 16584-3:2022 / Note: Date of issue 2022-05-13*Intended as replacement for DIN EN 16584-3 (2017-03).

RU-GOST R, Spectrophotometer Requirements

GOST 20903-1975 The rectangular fused silica cells for the spectrophotometers. Basic dimensions. Technical requirements
GOST 23116.0-1983 Cadmium of high purity. General requirements for methods of spectral analysis
GOST 27681-1988 Gamma-resonance spectrometers. General technical requirements and test methods
GOST R 53466-2009 Optics and optical equipment. Medical thermographs. General technical requirements. Methods of measuring the major parameters
GOST 23201.0-1978 Alumina. General requirements for methods of spectral analysis
GOST 27173-1986 Detector sets of ionizing radiations for spectrometry. General technical specification
GOST R 8.657-2009 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST 8.229-2013 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST 8.229-1981 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Methods and means of verification
GOST 11884.15-1982 Tungsten concentrate. General requirements for methods of spectrum analysis
GOST 33092-2014 Petroleum products. Test method for color by the automatic tristimulus spectrophotometer
GOST R 57080-2016 Medical electrical equipment. H-Ray Bone Densitometer (Absorptiometer). Technical requirements for governmental purchases
GOST 30115-1995 Paper and board. Determination of roughness/smoothness (air leak methods). General method
GOST 16273.0-1985 Technical selenium. General requirements for method of spectral analysis
GOST R 59422.2-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 2. Standard optical elements for laser equipment operating in the infrared spectral range. General technical requirements
GOST 9519.0-1982 Lead-calcium bearing alloys. General requirements for methods of spectral analysis
GOST R 59422.1-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 1. Standard optical elements for laser equipment operating in the ultraviolet, visible and near-infrared spectral ranges. General technical requirements

Standard Association of Australia （SAA）, Spectrophotometer Requirements

AS 2723:1984 Waters - Determination of uranium (VI) - Spectrophotometric method
AS 1050.19:1988 Methods for the analysis of iron and steel - Determination of nickel content - Spectrophotometric method
AS 1050.17:1988 Methods for the analysis of iron and steel - Determination of copper content - Spectrophotometric method
AS 3550.1:1988 Methods for the analysis of waters - Determination of dissolved sulphide - Spectrophotometric method
IEC 60904-2:2015 RLV Photovoltaic devices — Part 2: Requirements for photovoltaic reference devices
AS 4691.1:2023 Laser speed detection devices, Part 1: Definitions and device requirements
AS 4691.1:2003/Amdt 1:2006
AS/NZS IEC 60825.1:2014
AS ISO 9342.1:2017 Optics and optical instruments — Test lenses for calibration of focimeters, Part 1: Test lenses for focimeters used for measuring spectacle lenses
AS/NZS IEC 62471.2:2012 Photobiological safety of lamps and lamp systems, Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety

TR-TSE, Spectrophotometer Requirements

TS 752-1969 CHEMICAL ANALYSIS OF ZINC PHOTOMETRIC DETERMINATION OF IRON
TS 749-1969 ALUMINIUM OXIDEPRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM DETERMINATION OF IRON CONTENT 1,10 — PHENANTHROLINE PHOTOMETRIC METHOD
TS 3617-1981 SODIUM FLUORIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — DETERMINATION OF SILICA CONTENT — REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Spectrophotometer Requirements

GB/T 34323-2017 Carbon black—Determination of light transmittance of water dispersion—Spectrophotometer method
GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces

Association Francaise de Normalisation, Spectrophotometer Requirements

NF A20-425:1984 Iron ores. Spectrophotometric determination of chromium.
NF A20-421:1984 Iron ores. Spectrophotometric determination of vanadium.
NF A20-426:1984 Iron ores. Spectrophotometric determination of nickel.
NF A06-404:1975 Chemical analysis of lead. Spectrophotometric determination of bismuth.
NF A06-588:1970 Chemical analysis of aluminium. Spectrophotometric determination of vanadium.
NF A06-410:1976 Chemical analysis of lead. Spectrophotometric determination of antimony.
NF A06-408:1979 Chemical analysis of lead. Spectrophotometric determination of arsenic.
NF A06-401:1975 Chemical analysis of lead. Spectrophotometric determination of copper.
NF A06-835:1973 Zinc for galvanizing purposes. Spectrophotometric determination of aluminium.
NF A10-954:1972 Chemical analysis of ferro-vanadium. Spectrophotometric determination of phosphorus.
NF A06-405:1974 Chemical analysis of lead. Spectrophotometric determination of bismuth.
NF A10-813:1972 Chemical analysis of ferro-tungsten. Spectrophotometric determination of tin.
NF A06-612:1976 Chemical analysis of magnesium. Spectrophotometric determination of copper.
NF A20-401:1985 Iron ores. Determination of phosphorus content. Spectrophotometric method.
NF A20-423:1986 Iron ores. Determination of titanium content. Spectrophotometric determination.
NF A06-087:1966 Chemical analysis of manganese ores. Spectrophotometric determination of cobalt.
NF A06-094:1962 Chemical analysis of manganese ores. Spectrophotometric determination of titanium.
NF A06-095:1966 Chemical analysis of manganese ores. Spectrophotometric determination of vanadium.
NF A06-103:1969 Chemical analysis of manganese ores. Spectrophotometric determination of phosphorus.
NF A06-107:1970 Chemical analysis of manganese ores. Spectrophotometric determination of copper.
NF A06-823:1967 Chemical analysis of zinc alloys. Spectrophotometric determination of iron.
NF A06-827:1968 Chemical analysis of zinc alloys. Spectrophotometric determination of titanium.
NF A10-904:1972 Chemical analysis of ferro-vanadium. Spectrophotometric determination of phosphorus.
NF A21-104:1976 Chemical analysis of chromium ores. Determination of phosphorus. Spectrophotometric method.
NF A06-303:1962 Chemical analysis of steel and cast iron. Spectrophotometric determination of manganese.
NF A10-104:1986 Chemical analysis of ferro-silicon. Determination of phosphorus content. Spectrophotometric method.
NF A10-504:1986 Chemical analysis of silico-chromium. Determination of phosphorus content. Spectrophotometric method.
NF A10-404:1986 Chemical analysis of ferro-chromium. Determination of phosphorus content. Spectrophotometric method.
NF A10-204:1986 Chemical analysis of ferro-manganese. Determination of phosphorus content. Spectrophotometric method.
NF A20-402:1985 Iron ores. Determination of phosphorus content. Molybdenum blue spectrophotometric method.
NF A06-622:1984 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of manganese.
NF A06-624:1984 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of zirconium.
NF A06-563:1971 Chemical analysis of aluminium alloys. Spectrophotometric determination of antimony
NF A06-568:1971 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of tin.
NF A06-571:1964 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of iron.
NF A06-574:1966 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of titanium
NF A06-576:1966 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of manganese.
NF A06-582:1959 Chemical analysis of aluminium and aluminium alloys. Colorimetric determination of zirconium.
NF A06-586:1965 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of boron.
NF A06-713:1970 Chemical analysis of copper and its alloys. Spectrophotometric determination of silicon.
NF A06-714:1968 Chemical analysis of copper and its alloys. Spectrophotometric determination of aluminium.
NF A06-716:1970 Chemical analysis of copper and copper alloys. Spectrophotometric determination of manganese.
NF A06-802:1971 Chemical analysis of zinc and its alloys. Spectrophotometric determination of tin.
NF A06-569:1972 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of tin.
NF A06-613:1976 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of copper.
NF A06-616:1981 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of nickel.
NF A06-717:1983 Chemical analysis of copper and copper alloys. Spectrophotometric determination of arsenic.
NF A06-583:1984 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of bismuth.
NF A06-584:1984 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of berrylium.
NF A06-606:1984 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of iron.
NF T20-002:1966 Standard plan for methods of chemical analysis by flame emission spectrophotometry.
NF A06-323:1987 Chemical analysis of steels. Determination of nitrogen content. Molecular absorption spectrophotometric method.
NF A06-089:1966 Chemical analysis of manganese ores. Spectrophotometric and volumetric determination of chromium.
NF A06-804:1968 Chemical analysis of zinc and its alloys. Spectrophotometric determination of cadmium.
NF A06-313:1987 Chemical analysis of steel and cast iron. Determination of titanium content. Spectrophotometric method.
NF A10-304:1986 Chemical analysis of silico-manganese. Determination of phosphorus content. Spectrophotometric method.
NF S10-005-8*NF ISO 9211-8:2019 Optics and photonics - Optical coatings - Part 8 : minimum requirements for coatings used for laser optics
NF ISO 9211-8:2019 Optique et photonique - Traitements optiques - Partie 8 : exigences minimales pour revêtements utilisés pour l'optique laser
NF A06-374*NF EN ISO 13900:2002 Steel - Determination of boron content - Curcumin spectrophotometric method after distillation
NF A06-800:1968 Chemical analysis of zinc and its alloys. Spectrophotometric determination of copper (cuprazon method).
NF T20-253:1968 Chemical analysis of hydrochloric, nitric and sulphuric acids. Spectrophotometric determination of iron.
NF A06-390*NF EN ISO 10714:2002 Steel and iron - Determination of phosphorus content - Phosphovanadomolybdate spectrophotometric method.
NF A20-420*NF ISO 3886:1987 Iron ores. Determination of manganese content. Periodate spectrophotometric method.
NF A20-427:1985 Iron ores. Determination of copper content. 2,2'-biquinolyl spectrophotometric method.
NF A06-320*NF EN 10178:1989 Chemical analysis of ferrous materials. Determination of niobium in steels. Spectrophotometric method.
NF A06-356:1992 Chemical analysis of ferrous materials. Determination of bore in steel. Spectrophotometric method.
NF A06-088:1966 Chemical analysis of manganese ores. Spectrophotometric and gravimetric determination of nickel.
NF EN 60904-2:2015 Dispositifs photovoltaïques - Partie 2 : exigences applicables aux dispositifs photovoltaïques de référence
NF EN IEC 60904-2:2023 Dispositifs photovoltaïques - Partie 2 : exigences applicables aux dispositifs photovoltaïques de référence
NF A06-371:1984 Chemical analysis of steel. Molecular absorption spectrophotometric determination of zirconium (after separation by extraction).
NF A08-331*NF EN ISO 10700:1995 Steel and iron. Determination of manganese content. Flame atomic absorption spectrophotometric method.
NF ISO 9211-7:2021 Optique et photonique - Traitements optiques - Partie 7 : exigences minimales pour les traitements optiques séparateurs de faisceaux neutres
NF A06-347:1986 Chemical analysis of steel and cast iron. Determination of tin. Molecular absorption spectrophotometric method.
NF A06-337:1983 Chemical analysis of steel and cast iron. Determination of molydbenum content. Molecular absorption spectrophotometric method.
NF A06-311:1987 Chemical analysis of steel and cast iron. Determination of cobalt content. Molecular absorption spectrophotometric method.
NF A06-345:1987 Chemical analysis of steel and cast iron. Determination of vanadium content. Molecular absorption spectrophotometric method.
NF A06-308:1985 Chemical analysis of steel and cast iron. Determination of nickel content. Molecular absorption spectrophotometric method.
NF A06-407:1975 Chemical analysis of lead. Spectrophotometric determination of arsenic.
NF A20-415:1984 Iron ores. Determination of silicon content. Reduced molybdosilicate spectrophotometric method.
NF A22-410:1986 Manganese ores. Determination of arsenic content. Spectrophotometric and volumetric determinations.
NF A06-328:1987 Steel and cast iron. Determination of chromium content. Diphenylcarbazide spectrophotometric method.
NF T20-355:1978 Potassium chloride for industrial use. Determination of sodium content.flame emission spectrophotometric method).
NF X43-013:1977 Atmospheric pollution.determination of the concentration by mass ofsulphur dioxide, in the ambient air.analysis by the thorin spectrophotometric method.
NF S10-005-6*NF ISO 9211-6:2019 Optics and photonics - Optical coatings - Part 6 : minimum requirements for reflecting coatings
NF ISO 9211-6:2019 Optique et photonique - Traitements optiques - Partie 6 : exigences minimales pour les revêtements réfléchissants
NF A06-352*NF EN 10212:1995 Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method.
NF A06-373*NF EN 10179:1989 Chemical analysis of ferrous materials. Determination of nitrogen (trace amounts) in steels. Spectrophotometric method.
NF S10-005-7:2021 Optics and photonics - Optical coatings - Part 7 : minimum requirements for neutral beam splitter coatings
NF S10-005-5*NF ISO 9211-5:2019 Optics and photonics - Optical coatings - Part 5 : minimum requirements for antireflecting coatings
NF ISO 9211-5:2019 Optique et photonique -Traitements optiques - Partie 5 : exigences minimales pour les revêtements anti-réfléchissants
NF A20-424*NF ISO 4691:1986 Iron ores. Determination of titanium content. Diantipyrylmethane spectrophotometric method.
NF EN ISO 8598-1:2014 Optique et instruments d'optique - Frontofocomètres - Partie 1 : instruments pour cas généraux
NF C71-001*NF EN 60598-2-1:1991 Luminaires. Part 2 : particular requirements. Section one : fixed general purpose luminaires.
NF A06-841-4*NF EN 12441-4:2003 Zinc and zinc alloys - Chemical analysis - Part 4 : determination of iron in zinc alloys - Spectrophotometric method
NF A11-101:1983 Chemical analysis of ferroniobium. Determination of niobium content gravimetric method. Determination of tantalum content. Spectrophotometric method.
NF C57-322*NF EN 60904-2:2015 Photovoltaic devices - Part 2 : requirements for reference devices
NF EN 16584-3:2017 Applications ferroviaires - Conception destinée à l'usage par les PMR - Exigences générales - Partie 3 : caractéristiques optiques et de friction
NF A06-341-2*NF EN ISO 4829-2:2016 Steel - Determination of total silicon content - Reduced molybdosilicate spectrophotometric method - Part 2 : silicon contents between 0,01% and 0,05 %
NF C71-018*NF EN 60598-2-18:1994 Luminaires - Part 2 : particular requirements - Section 18 : luminaires for swimming pools and similar applications.
NF C57-105-1-1*NF EN IEC 61215-1-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1 : special requirements for testing of crystalline silicon photovoltaic (PV) modules
NF C57-105-1-1*NF EN 61215-1-1:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1 : special requirements for testing of crystalline silicon photovoltaic (PV) Modules
NF S95-168*NF EN ISO 14408:2016 Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
NF EN ISO 11553-2:2009 Sécurité des machines - Machines à laser - Partie 2 : exigences de sécurité pour dispositifs de traitement laser portatifs
NF C43-805:2008 Safety of laser products - Part 1 : equipment classification and requirements.
NF C05-625-2-4*NF EN 50625-2-4:2017 Collection, logistics & treatment requirements for WEEE - Part 2-4 : treatment requirements for photovoltaic panels
NF EN ISO 9342-2:2006 Optique et instruments d'optique - Verres étalons pour l'étalonnage des frontofocomètres - Partie 2 : verres étalons pour frontofocomètres utilisés pour le mesurage des lentilles de contact
NF C71-006:1995 Luminaires. Part 2 : particular requirements. Section 6 : luminaires with built-in transformers for filament lamps.
NF C57-105-1*NF EN IEC 61215-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1 : test requirements
NF C57-105-1*NF EN 61215-1:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1 : Test requirements
NF F31-584-3*NF EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3 : optical and friction characteristics
NF EN IEC 61215-1:2021 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1 : exigences d'essai
NF A06-341-2:1990 Steel and cast iron. Determination of total silicon content. Reduced molybdosilicate spectrophotometric method. Part 2 : silicon contents between 0,01 and 0,05 per cent.
NF EN 61215-1-3:2017 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-3 : exigences particulières d'essai des modules photovoltaïques (PV) au silicium amorphe à couches minces
NF EN IEC 61215-1-1:2021 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-1 : exigences particulières d'essai des modules photovoltaïques (PV) au silicium cristallin
NF EN IEC 61215-1-3:2021 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-3 : exigences particulières d'essai des modules photovoltaïques (PV) au silicium amorphe à couches minces
NF A22-405*NF ISO 7990:1986 Manganese ores and concentrates. Determination of total iron content. Titrimetric method after reduction and sulfosalicylic acid spectrophotometric method.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectrophotometer Requirements

GB/T 9468-2008 General requirements for the photometry and goniophotometry of luminaries
GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements
GB/T 25968-2010 Test methods of solar transmittance and solar absorptance of materials by spectrophotometer
GB/T 23649-2009 Graphic technology.Process control.Optical,geometrical and metrological requirements for reflection densitometers for graphic arts use
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB 7247.1-2012 Safety of laser products.Part 1:Equipment classification and requirements
GB/T 30117.2-2013 Photobiological safety of lamps and lamp systems.Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
GB/T 6495.2-1996 Photovoltaic devices. Part 2: Requirements for reference solar cells

Indonesia Standards, Spectrophotometer Requirements

SNI 13-4119-1996 Determination of phosphorus in ash from coal using spectrophotometer
SNI 06-7129-2005 Test methods of chromium (IV) content in leather by spectrophotometers
SNI 13-6590-2001 The determination for arsenic content in minerals by spectrophotometric
SNI 19-7119.1-2005 Ambient atmospheres - Part 1: Test methods of ammonia (NH3) content by indophenols using spectrophometers
SNI 13-6180-1999 Procedure for optimization of flame Atomic Absorption Spectrophotometer (AAS)
SNI 13-6345-2000 Determination of trace elements in coal and coke ash by atomic absorpsion spectrophotometer
SNI 19-7117.19-2009
SNI 06-6989.30-2005 Water and wastewater - Part 30: Test methods of ammonia content with spectrophotometers by phenates
SNI 06-6989.35-2005 Water and waste water - Part 35: Test methods of dissolved aluminium (Al) content by spectrophotometers with eriochrome cyanine R
SNI 6989.66-2009
SNI 6989.65-2009
SNI 7117.18-2009
SNI 19-7117.6-2005 Exhaust gas emissions - Stationary sources - Part 6: Test methods of ammonia (NH3) content by indophenol methods using spectrophotometers
SNI 6989.67-2009
SNI 06-6989.31-2005 Water and waste water - Part 31: Test methods of phosphate content by spectrophotometers with acid ascorbic
SNI 19-6670-2002 Determination of heavy metal content in solid waste by lithium metaborate fusion in an atomic absorption spectrophotometers (AAS)
SNI 03-4151-1996 Test methods for phosphate content in light sediment by hydrogen chloride using spectrophotometer apparatus in ammonium molybdat manuver

IN-BIS, Spectrophotometer Requirements

Korean Agency for Technology and Standards (KATS), Spectrophotometer Requirements

KS E ISO 7834:2012 Iron ores-Determination of arsenic content-Molybdenum blue spectrophotometric method
KS B ISO 10109-6:2002 Optics and optical instruments-Environmental requirements-Part 6:Test requirements for medical optical devices
KS B ISO 10109-7:2004 Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS B ISO 10109-7-2004(2019) Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS B ISO 10109-6-2002(2017) Optics and optical instruments－Environmental requirements－Part 6：Test requirements for medical optical devices
KS M 5506-2011(2021) Testing method for infrared reflectance (from spectrophotometric date)
KS B ISO 10109-4-2006(2021) Optics and optical instruments — Environmental requirements —Part 4: Test requirements for telescopic systems
KS B ISO 10109-4-2006(2016) Optics and optical instruments — Environmental requirements —Part 4: Test requirements for telescopic systems
KS X ISO 14981-2003(2008) Graphic technology－Process control－Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use
KS M ISO 6382:2004 General method for determination of silicon content－Reduced molybdosilicate spectrophotometric method
KS B ISO 10109-8:2002 Optics and optical instruments－Environmental requirements－Part 8：Test requirements for extreme conditions of use
KS B ISO 10109-8-2002(2017) Optics and optical instruments－Environmental requirements－Part 8：Test requirements for extreme conditions of use
KS B ISO 10109-8-2002(2022) Optics and optical instruments－Environmental requirements－Part 8：Test requirements for extreme conditions of use
KS B ISO 10109-12:2006 Optics and optical instruments－Environmental requirements－Part 12：Conditions of transport for optical instruments
KS B ISO 10109-12-2006(2021) Optics and optical instruments — Environmental requirements —Part 12: Conditions of transport for optical instruments
KS B ISO 10109-12-2006(2016) Optics and optical instruments — Environmental requirements —Part 12: Conditions of transport for optical instruments
KS R ISO 6742-2:2003 Cycles－Lighting and retro-reflective devices－Photometric and physical requirements－Part 2：Retro-reflective devices
KS R ISO 6742-1:2003 Cycles－Lighting and retro-reflective devices－Photometric and physical requirements－Part 1：Lighting equipment
KS B ISO 10109-11-2006(2016) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS E ISO 4691:2010 Iron ores－Determination of titanium－Diantipyrylmethane spectrophotometric method
KS B ISO 10109-11-2006(2021) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS B ISO 10109-11:2006 Optics and optical instruments－Environmental requirements－Part 11：Optical instruments for outdoor conditions of use
KS D ISO 7788-2003(2013) Steel－Surface finish of hot－rolled plates and wide flats－Delivery requirements
KS M ISO 2865-2003(2018)
KS D ISO 7788:2003 Steel-Surface finish of hot-rolled plates and wide flats-Delivery requirements
KS D ISO 7788:2014 Steel-Surface finish of hot-rolled plates and wide flats-Delivery requirements
KS C IEC 62471-2-2014(2019) Photobiological safety of lamps and lamp systems — Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
KS C IEC 60745-2-3:2017 Hand-held motor-operated electric tools — Safety — Part 2-3: Particular requirements for grinders, polishers and disktype sanders
KS M ISO 6685:2004 Chemical products for industrial use－General method for determination of iron content－1, 10－Phenanthroline spectrophotometric method
KS C IEC 60825-1-2017(2022) Safety of laser products —Part 1: Equipment classification and requirements
KS M ISO 1617-2003(2013) Aluminium oxide primarily used for the production of aluminium ― Determination of sodium content-flame emission spectrophotometric method
KS C IEC 62471-2:2014 Photobiological safety of lamps and lamp systems — Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
KS P ISO 14408:2009 Tracheal tubes designed for laser surgery－Requirements for marking and accompanying information
KS P ISO 14408:2020 Tracheal tubes designed for laser surgery — Requirements for marking and accompanying information
KS M ISO 3430-2007(2012) Sodium fluoride primarily used for the production of aluminium－Determination of silica content－Reduced molybdosilicate spectrophotometric method
KS M ISO 2829-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of phosphorus content－Reduced phosphomolybdate spectrophotometric method
KS B ISO 11884-2:2011 Optics and photonics－Minimum requirements for stereomicroscope－Part 2：High performance microscopes
KS M ISO 1232-2003(2018)
KS D ISO 11437-1:2012 Nickel alloys-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 1:General requirements and sample dissolution

British Standards Institution (BSI), Spectrophotometer Requirements

PD ISO/TS 23031:2020 Graphic technology. Assessment and validation of the performance of spectrocolorimeters and spectrodensitometers
BS EN 60904-2:2015 Photovoltaic devices Part 2 : Requirements for photovoltaic reference devices
BS ISO 9211-7:2018 Optics and photonics. Optical coatings. Minimum requirements for neutral beam splitter coatings
BS ISO 24421:2023 Biotechnology. Minimum requirements for optical signal measurements in photometric methods for biological samples
BS ISO 9211-7:2021 Tracked Changes. Optics and photonics. Optical coatings. Minimum requirements for neutral beam splitter coatings
21/30434354 DC BS EN 60904-2. Photovoltaic devices. Part 2. Requirements for photovoltaic reference devices
BS ISO 7788:2021 Steel. Surface finish of hot-rolled plates and wide flats. Delivery requirements
BS EN 60825-1:2007 Safety of laser products - Equipment classification and requirements
BS EN 60825-1:2014 Safety of laser products. Equipment classification and requirements
BS EN 60825-1:2014+A11:2021 Safety of laser products - Equipment classification and requirements
20/30394351 DC BS ISO 23946. Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for optical properties of ceramic phosphors for white light emitting diodes using a Gonio-spectrofluorometer
BS 6102-3:1986 Cycles - Specification for photometric and physical requirements of lighting equipment
BS ISO 23946:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer
BS ISO 21501-3:2019 Determination of particle size distribution. Single particle light interaction methods - Light extinction liquid-borne particle counter
22/30422334 DC BS ISO 24421. Biotechnology. Minimum requirements for optical signal measurements in photometric methods for biological samples
PD IEC TR 61547-1:2020 Equipment for general lighting purposes. EMC immunity requirements. Objective light flickermeter and voltage fluctuation immunity test method
22/30454072 DC BS EN 17871. Glass in building. Spectrophotometric characteristics of glass products. Validation procedure for calculation tool
BS 7442 Sec.4.2:1994 Rubber or plastics covered rollers. Requirements. Classification by surface finish
BS ISO 21501-2:2019 Determination of particle size distribution. Single particle light interaction methods - Light scattering liquid-borne particle counter
BS EN 61215-1-1:2016 Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Special requirements for testing of crystalline silicon photovoltaic (PV) modules
BS EN IEC 61215-1-1:2021 Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Special requirements for testing of crystalline silicon photovoltaic (PV) modules
BS 7020 Sec.5.2:1993 Analysis of iron ores. Methods for the determination of silicon content. Reduced molybdosilicate spectrophotometric method
22/30406184 DC BS EN ISO 9342-1. Optics and optical instruments. Test lenses for calibration of focimeters - Part 1. Reference lenses for focimeters used for measuring spectacle lenses
BS EN IEC 61215-1-3:2021+A1:2022 Terrestrial photovoltaic (PV) modules. Design qualification and type approval - Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
20/30381900 DC BS EN ISO 7788. Steel. Surface finish of hot-rolled plates and wide flats. Delivery requirements
BS ISO 24585-2:2023 Graphic technology. Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application. Requirements for decorative surfaces

American Society for Testing and Materials (ASTM), Spectrophotometer Requirements

ASTM E2729-09 Standard Practice for Rectification of Spectrophotometric Bandpass Differences
ASTM E388-04(2009) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ^,
ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E1866-97(2021) Standard Guide for Establishing Spectrophotometer Performance Tests
ASTM E388-04 Standard Test Method for Wavelength Accuracy of Spectral Bandwidth Fluorescence Spectrometers
ASTM E388-72(1998) Standard Test Method for Spectral Bandwidth and Wavelength Accuracy of Fluorescence Spectrometers
ASTM E2175-01(2021) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E2867-14(2019) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D6122-99 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D6122-01 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D6122-09 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM E2056-04 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E958-93(1999) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E925-83(1994)e1 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E2175-01 Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2175-01(2008) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2175-01(2013) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM D4085-93(1997) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM UOP262-99 Phenols and Thiophenols in Petroleum Products by Spectrophotometry
ASTM D6122-06 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D6122-06e1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D1685-00 Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
ASTM D1685-05 Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
ASTM D4085-93(2003) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM E2867-14(2023) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D4085-93(2021) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM D4085-93(2008) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM E1164-12 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D4085-93(2013) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM E2056-00 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E387-84(1995)e1 Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method
ASTM E387-04 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM E275-08 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2056-04(2016) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E275-08(2022) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E387-04(2022) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2014) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E275-08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM UOP549-81 Sodium in Petroleum Distillates by Flame Emission, Using an Atomic Absorption Spectrophotometer
ASTM E2108-10 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM E158-86(1996)e1 Standard Practice for Fundamental Calculations to Convert Intensities into Concentrations in Optical Emission Spectrochemical Analysis (Withdrawn 2004)
ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM D6756-10 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM D7058-19 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D7058-04(2014) Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D6122-10 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-13 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-15 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

GOSTR, Spectrophotometer Requirements

GOST R 56980.1-2020 Photovoltaic modules. Design qualification for technical requirements. Part 1. Test requirements
GOST R 59165-2020 Optics and Photonics. Fiber-optic sensors. Temperature sensors based on fiber Bragg grating. General technical requirements and test methods
GOST R 56980.1-1-2020 Photovoltaic modules. Design qualification and type approval. Part 1-1. Special requirements for testing of crystalline silicon photovoltaic modules

International Organization for Standardization (ISO), Spectrophotometer Requirements

ISO 10109-6:2005 Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments
ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring instruments
ISO 10109-6:1994 Optics and optical instruments - Environmental requirements - Part 6: Test requirements for medical optical devices
ISO/TS 23031:2020 Graphic technology — Assessment and validation of the performance of spectrocolorimeters and spectrodensitometers
ISO 9211-8:2018 Optics and photonics — Optical coatings — Part 8: Minimum requirements for coatings used for laser optics
ISO/FDIS 24421 Biotechnology — Minimum requirements for optical signal measurements in photometric methods for biological samples
ISO 10109-8:2005 Optics and photonics - Environmental requirements - Part 8: Test requirements for extreme conditions of use
ISO 9211-6:2018 Optics and photonics - Optical coatings - Part 6: Minimum requirements for reflecting coatings
ISO 10109-8:1994 Optics and optical instruments - Environmental requirements - Part 8: Test requirements for extreme conditions of use
ISO 9211-7:2018 Optics and photonics - Optical coatings - Part 7: Minimum requirements for neutral beam splitter coatings
ISO 9211-7:2021 Optics and photonics - Optical coatings - Part 7: Minimum requirements for neutral beam splitter coatings
ISO 10109-12:2004 Optics and optical instruments - Environmental requirements - Part 12: Conditions of transport for optical instruments
ISO 9211-5:2018 Optics and photonics — Optical coatings — Part 5: Minimum requirements for antireflecting coatings
ISO 24421:2023 Biotechnology — Minimum requirements for optical signal measurements in photometric methods for biological samples
ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use
ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO 2865:1973 Aluminium oxide primarily used for the production of aluminium; Determination of boron content; Curcumin spectrophotometric method
ISO/FDIS 9342-1 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO 21501-3:2019 Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter
ISO 1617:1976 Aluminium oxide primarily used for the production of aluminium; Determination of sodium content; Flame emission spectrophotometric method
ISO 7788:1985 Steel; Surface finish of hot-rolled plates and wide flats; Delivery requirements
ISO 7788:2021 Steel - Surface finish of hot-rolled plates and wide flats - Delivery requirements
ISO 21501-2:2019 Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter
ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium; Determination of phosphorus content; Reduced phosphomolybdate spectrophotometric method
ISO 11884-2:2007 Optics and photonics - Minimum requirements for stereomicroscopes - Part 2: High performance microscopes
ISO/TS 18621-21:2020 Graphic technology - Image quality evaluation methods for printed matter - Part 21: Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
ISO/TS 18621-21:2023 Graphic technology — Image quality evaluation methods for printed matter — Part 21: Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
ISO 11884-1:2006 Optics and photonics - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use

PL-PKN, Spectrophotometer Requirements

PN C04052-1965 Petroleum produc?s Spectrophofomeiric determination of aroma?ic hydrocarbons in gasoline

Illuminating Engineering Society of North America, Spectrophotometer Requirements

IESNA LM-78-2007 Method for Total Luminous Flux Measurement of Lamps Using an Integrating Sphere Photometer
IESNA TM-24-2013 An Optional Method for Adjusting the Recommended Illuminance for Visually Demanding Tasks Within IES Illuminance Categories P through Y Based on Light Source Spectrum

IPC - Association Connecting Electronics Industries, Spectrophotometer Requirements

IPC D-640-2016 Design and Critical Process Requirements for Optical Fiber@ Optical Cable and Hybrid Wiring Harness Assemblies

Group Standards of the People's Republic of China, Spectrophotometer Requirements

T/GXAF 0013-2023 Complex fertilizers—Determination of Alginate Oligosaccharides—Spectrophotometry
T/SZSA 024.1-2019 Indoor health lighting design specification first part: Full spectrum technology requirements
T/FSLA 006-2021 Indoor Healthy Lighting Design Specification Part 1: Full Spectrum Technical Requirements
T/CPIA 0011.201-2019 Household Photovoltaic Grid-connected Power Generation System Part 2-1: General Requirements for Design Specifications

Japanese Industrial Standards Committee (JISC), Spectrophotometer Requirements

JIS M 8215-2:2006 Iron ores -- Determination of manganese content -- Periodate spectrophotometric method
JIS K 0145:2002 Surface chemical analysis -- X-ray photoelectron spectrometers -- Calibration of energy scales
JIS K 0400-67-20:1998 Water quality -- Determination of selenium -- Atomic absorption spectrometric method (hydride technique)
JIS B 9623:2002 Graphic technology -- Process control -- Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use

European Committee for Electrotechnical Standardization（CENELEC）, Spectrophotometer Requirements

EN 60904-2:2015 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices
EN IEC 61215-1-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
EN 61215-1-1:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) Modules
EN 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
EN 50625-2-4:2017 Collection@ logistics & treatment requirements for WEEE - Part 2- 4: Treatment requirements for photovoltaic panels
EN 61215-1:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
EN IEC 61215-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements

International Electrotechnical Commission (IEC), Spectrophotometer Requirements

IEC 60904-2:2015 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices
IEC 61215-1-1:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
IEC 63092-2:2020 Photovoltaics in buildings - Part 2: Requirements for building-integrated photovoltaic systems
IEC 63092-1:2020 Photovoltaics in buildings - Part 1: Requirements for building-integrated photovoltaic modules
IEC 61215-1-1:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
IEC 61215-1-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
IEC 61215-1:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
IEC 60825-1:2007 Safety of laser products - Part 1: Equipment classification and requirements
IEC 60904-2:1989 Photovoltaic devices; part 2: requirements for reference solar cells
IEC 61215-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
IEC 60825-1 INT 1:2009 Safety of laser products - Part 1: Equipment classification and requirements
IEC 60825-1 INT 2:2011 Safety of laser products - Part 1: Equipment classification and requirements
IEC TR 61547-1:2020 Equipment for general lighting purposes - EMC immunity requirements - Part 1: Objective light flickermeter and voltage fluctuation immunity test method
IEC TR 61547-1:2020 RLV Equipment for general lighting purposes - EMC immunity requirements - Part 1: Objective light flickermeter and voltage fluctuation immunity test method
IEC TR 61282-14:2016 Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
IEC TR 61282-14:2019 RLV Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
IEC TR 61282-14:2019 Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants

IX-IX-IEC, Spectrophotometer Requirements

IEC 60904-2:2023 CMV Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices
IEC 60904-2:2023 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices

未注明发布机构, Spectrophotometer Requirements

BS EN IEC 60904-2:2023 Photovoltaic devices Part 2 : Requirements for photovoltaic reference devices
BS 6102-3:1986(2003) Cycles — Part 3 : Specification for photometric and physical requirements of lighting equipment
BS EN ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters Part 1 : Reference lenses for focimeters used for measuring spectacle lenses
BS EN 60825-1:2014+A11:2021(2022) Safety of laser products Part 1 : Equipment classification and requirements

ES-UNE, Spectrophotometer Requirements

UNE-EN 60904-2:2015 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices
EN IEC 60904-2:2023 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices
UNE-EN 61215-1-1:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
UNE-EN IEC 61215-1-1:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
UNE-EN 50625-2-4:2017 Collection, logistics & treatment requirements for WEEE - Part 2-4: Treatment requirements for photovoltaic panels (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-EN 60825-1:2015/A11:2021/AC:2022-03 Safety of laser products - Part 1: Equipment classification and requirements
UNE-EN 60825-1:2015/AC:2017-06 Safety of laser products - Part 1: Equipment classification and requirements
UNE-EN 60825-1:2015/A11:2021 Safety of laser products - Part 1: Equipment classification and requirements
ISO 24585-2:2023 Graphic technology — Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application — Part 2: Requirements for decorative surfaces
UNE-EN 16584-3:2019 Railway Applications - Design for PRM Use - General Requirements - Part 3: Optical and Friction Characteristics
UNE-EN 61215-1:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
UNE-EN IEC 61215-1:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
UNE-EN IEC 61215-1-3:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
UNE-EN IEC 61215-1-3:2022/A1:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules

KR-KS, Spectrophotometer Requirements

KS B ISO 10109-4-2023 Optics and optical instruments — Environmental requirements — Part 4: Test requirements for telescopic systems
KS B ISO 10109-12-2023 Optics and optical instruments — Environmental requirements — Part 12: Conditions of transport for optical instruments
KS B ISO 10109-11-2023 Optics and optical instruments — Environmental requirements — Part 11: Optical instruments for outdoor conditions of use
KS C IEC 60745-2-3-2017 Hand-held motor-operated electric tools — Safety — Part 2-3: Particular requirements for grinders, polishers and disktype sanders
KS C IEC 60825-1-2017 Safety of laser products —Part 1: Equipment classification and requirements
KS P ISO 14408-2020 Tracheal tubes designed for laser surgery — Requirements for marking and accompanying information

国家质量监督检验检疫总局, Spectrophotometer Requirements

SN/T 4675.24-2016 Spectrophotometric method for determination of Forintschock index of export wines

European Committee for Standardization (CEN), Spectrophotometer Requirements

EN 14937-1:2006 Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method
EN ISO 9342-1:2023 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023)
FprEN ISO 9342-1 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/FDIS 9342-1:2023)

Professional Standard - Agriculture, Spectrophotometer Requirements

NY/T 1373-2007 Determination of Sulfite in Edible Fungus Distill under Nitrogen with the Method of Spectrophotometer

Lithuanian Standards Office , Spectrophotometer Requirements

LST ISO 6742-2:2011 Cycles - Lighting and retro-reflective devices - Photometric and physical requirements - Part 2: Retro-reflective devices (ISO 6742-2:1985, identical)
LST ISO 6742-1:2011 Cycles - Lighting and retro-reflective devices - Photometric and physical requirements - Part 1 - Lighting equipment (ISO 6742-1:1987, identical)
LST EN 60825-1/A11-2021 Safety of laser products - Part 1: Equipment classification and requirements
LST EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)
LST EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005)

CZ-CSN, Spectrophotometer Requirements

CSN ISO 7530-1:1994 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 1: General requirements and sample dissolution
CSN 66 6410-1985 Photography. Senzitometry. Technical re- quirements and methods for calibrations of standards of transmission density.

AT-ON, Spectrophotometer Requirements

ONORM M 6610-2000 Water analysis - Photometric determination of dissolved silicate

AENOR, Spectrophotometer Requirements

UNE 72251:1985 LUMINAIRES FOR ESCAPE EMERGENCY LIGHTINGS. PHYSICAL REQUIREMENTS FOR THE PHOTOMETRIC MEASUREMENTS
UNE-EN 60825-1:2015 Safety of laser products - Part 1: Equipment classification and requirements
UNE-EN 60825-1:2008 Safety of laser products - Part 1: Equipment classification and requirements
UNE-EN ISO 9342-1:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)
UNE-EN ISO 9342-2:2007 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005)

U.S. Military Regulations and Norms, Spectrophotometer Requirements

ARMY MIL-STD-1425 A-1991 MILITARY LASERS AND ASSOCIATED SUPPORT EQUIPMENT, SAFETY DESIGN REQUIREMENTS FOR

Military Standard of the People's Republic of China-General Armament Department, Spectrophotometer Requirements

GJB 2272A-2014 Safety design requirements for military laser products and associated support equipment
GJB 2272-1995 Safety design requirements for military laser products and auxiliary equipment

International Telecommunication Union (ITU), Spectrophotometer Requirements

ITU-R P.1817-1-2012 Propagation data required for the design of terrestrial free-space optical links

ES-AENOR, Spectrophotometer Requirements

UNE 36-317 Pt.2-1989

Defense Logistics Agency, Spectrophotometer Requirements

DLA MIL-STD-1678-1 CHANGE 1-2011 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (Part 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 5 PARTS)
DLA MIL-STD-1678-1 B-2013 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (Part 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 6 PARTS)
DLA MIL-STD-1678-2 CHANGE 2-2012 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (Part 2: OPTICAL MEASUREMENTS) (PART 2 OF 6 PARTS)
DLA MIL-STD-1678-2 A-2013 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (Part 2: OPTICAL MEASUREMENTS) (PART 2 OF 6 PARTS)

Professional Standard - Navy, Spectrophotometer Requirements

HJB 331.5-2006 Technical Requirements for Repair of Computing Sights Part 5: DM931 Optical and Electronic Computing Sights

Professional Standard - Electron, Spectrophotometer Requirements

SJ 20798-2001 Safety design requirements for military lasers and associated support equipment
SJ/Z 3206.1-1989 General requirements for laboratories involved with determination of emision spectrum

工业和信息化部, Spectrophotometer Requirements

HG/T 2687-2021 Control requirements for reference materials for dye color and intensity determination
YD/T 2003-2018 Reconfigurable optical add-drop multiplexing (ROADM) equipment technical requirements

BE-NBN, Spectrophotometer Requirements

NBN T 03-414-1983 Aluminium oxide primarily used for the production of aluminium - Determination of calcium content - Naphthalhydroxamic acid spectrophotometric method
NBN T 03-411-1983 Aluminium oxide primarily used for the production of aluminium - Determination of sodium content - Flame emission spectrophotometrie method
NBN T 03-418-1983 Aluminium oxide primarily used for the production of aluminium - Determination of fluorine content - Alizarin complexone and lanthanum chloride spectrophotometric method
NBN T 03-420-1983 Aluminium oxide primarily used for the production of aluminium - Determination of boron content - Curcumine spectrophotometric method

SE-SIS, Spectrophotometer Requirements

SIS SS 488 10 01-1989 Laser — Radiation safety of laser products, equipment classification, requirements and user's guide
SIS SS-EN 60 825-1992 Laser — Radiation safety of laser products, equipment classification, requirements and user's guide

Danish Standards Foundation, Spectrophotometer Requirements

DS/EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses
DS/EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses
DS/EN ISO 14408:2009 Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
DS/EN 60825-1:2008 Safety of laser products - Part 1: Equipment classification and requirements
DS/EN IEC 61215-1:2021 Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1: Test requirements
DS/EN IEC 61215-1-1:2021 Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules

YU-JUS, Spectrophotometer Requirements

JUS H.B8.612-1979 Ahtminium oxide primarily used for the production of aluminium. Determimtion of boron content - Curcumin spectrophotometric method
JUS H.B8.605-1979 Ahaninium oxide primarily med for the production of alumimum. Determinatton of sodium content. Flame emission spectrophotometric method

National Association of Corrosion Engineers (NACE), Spectrophotometer Requirements

NACE RP0178-2003 Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service

Professional Standard - Post and Telecommunication, Spectrophotometer Requirements

YD/T 2003-2009 Technical Requirements for Reconfigurable Optical Add Drop Multiplexing (ROADM) Equipment

CENELEC - European Committee for Electrotechnical Standardization, Spectrophotometer Requirements

EN 60825-1:2007 Safety of laser products - Part 1: Equipment classification and requirements
EN 60825-1:2014/PRA1:2019 Safety of laser products - Part 1: Equipment classification and requirements

交通部, Spectrophotometer Requirements

JT/T 477-2002 Technical requirements and testing methods for the design of reflective markings on port work clothing

RO-ASRO, Spectrophotometer Requirements

STAS SR ISO 1232:1995 Aluminium oxide primarily used for the production of aluminium -Determination of silica content - Reduced molybdosilicate spectrophotometric method

CEN - European Committee for Standardization, Spectrophotometer Requirements

EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics

SAE - SAE International, Spectrophotometer Requirements

SAE AS7110/6B-2000 National Aerospace and Defense Contractors Accreditation Program Requirements for Laser Welding
SAE AS7110/6-1995 National Aerospace and Defense Contractors Accreditation Program Requirements for Laser Welding
SAE AS7110/6A-1997 National Aerospace and Defense Contractors Accreditation Program Requirements for Laser Welding
SAE AS7110/2A-1997 National Aerospace and Defense Contractors Accreditation Program Requirements for Flash Welding
SAE AS7110/2-1995 National Aerospace and Defense Contractors Accreditation Program Requirements for Flash Welding
SAE AS7110/2B-2000 National Aerospace and Defense Contractors Accreditation Program Requirements for Flash Welding

North Atlantic Treaty Organization Standards Agency, Spectrophotometer Requirements

STANAG 4368-2002 ELECTRIC AND LASER IGNITION SYSTEMS FOR ROCKETS AND GUIDED MISSILE MOTORS - SAFETY DESIGN REQUIREMENTS