ZH
RU
ES

Electronic Tensile Testing Machine

Electronic Tensile Testing Machine, Total:164 items.

In the international standard classification, Electronic Tensile Testing Machine involves: Mechanical testing, Electromechanical components for electronic and telecommunications equipment, Integrated circuits. Microelectronics, Textile machinery, Non-destructive testing, Agricultural machines, implements and equipment, Internal combustion engines, Components and accessories for telecommunications equipment, Power transmission and distribution networks, Transformers. Reactors, Paper and board, Refrigerating technology, IT terminal and other peripheral equipment, Environmental testing, Conducting materials, Wind turbine systems and other alternative sources of energy, Mechanical structures for electronic equipment, Compressors and pneumatic machines, Audio, video and audiovisual engineering, Manufacturing forming processes, Iron and steel products, Rotating machinery.

Group Standards of the People's Republic of China, Electronic Tensile Testing Machine

T/CIMA 0057-2022 Horizontal Tensile Testing Machine
T/CEC 505-2021 Guidelines for insulation tests of dry-type high-frequency transformers for power electronic transformers

RU-GOST R, Electronic Tensile Testing Machine

GOST 27281-1987 Electromechanical radio components. Method of testing cable clamp strength to cable tension
GOST 27278-1987 Electromechanical radio components. Method of testing cable clamp strength to cable bending
GOST 27279-1987 Electromechanical radio components. Method of testing cable clamp strength to cable rotation
GOST 27280-1987 Electromechanical radio components. Method of testing cable clamp stregth to cable twisting

Professional Standard - Machinery, Electronic Tensile Testing Machine

JB/T 9375-2014 Mechanical tensile testing machines.Specification
JB/T 9375-1999 Specifications for the mecanical tensile testing machines
JB/T 8839.2-1999 Magnetoelectric pressure gauge for internal-combustion engine - Test method
JB/T 8763-2001 Specifications for the electro-hydraulic compression testing machines for cement
JB/T 8888-1999 Test method of determining residual stress of rotor forgings of steam turbines and steam turbo-generators

Taiwan Provincial Standard of the People's Republic of China, Electronic Tensile Testing Machine

CNS 13724-1996 Method of Test for Pull Strength of Microelectronic Wire Bonds
CNS 13725-1996 Method of Nondestructive Test for Microelectronic Wire Bonds

National Metrological Technical Specifications of the People's Republic of China, Electronic Tensile Testing Machine

JJF 1296.1-2011 Program of Pattern Evaluation of Static Uniaxial Testing Machines― Part 1 :Electronic Universal Testing Machines
JJF 1296.2-2011 Program of Pattern Evaluation of Static Uniaxial Testing Machines―Part 2 :Electro-hydraulic Servo Universal Testing Machines

YU-JUS, Electronic Tensile Testing Machine

JUS N.R4.468-1978 Electromechanical components for dectronic equipment. Test methods. Test 17c: Cable clamp, resistance to cable pull (tensUe)
JUS N.R4.457-1977 Electromechanical components for electronic equipment. Test metho?s. Test 15?: Contact insertion and extraction force.
JUS N.R4.462-1979 Electromechanical components for electronic equipment. Test methods. Test 16 d: Tensile strength (arimped cormecttons)
JUS N.R4.446-1991 Electromechanicalcomponents forelectronic eguipment. Test 13c: Operating force (switthes>
JUS N.R4.469-1978 Electromechanical components for electronic equipment. Test methods. Test 17d: Cable damp, resistance to cable torsion
JUS N.R4.467-1978 Electromechanical components for electronic equipment. Test methods. Test 17b: Cable clamp, resistance to cable rotation
JUS N.R4.456-1977 Electromechanical components for electronic equipment.Test methods. Test 15c: Insert retention in housing (torsional)
JUS N.R4.485-1990 Electromechanical components for electronic equipment. Test methods. Test 15f: Effectiveness of conector couoiino devices
JUS N.R4.492-1987 Electromechanical componenls for electronic equipment. Test methods. Test 16i: Grounding contact spring holding force
JUS N.R4.489-1989 Electromechanical components for electronic equipment. Test methods. Test 16k: Stripping force, solderless vvrapped connections
JUS N.R4.499-1990 Electrcmechanical components for eiectronic epuipment. Test methods. Tast 12e: Resistance to soide- ring heat, iron method
JUS N.R4.498-1990 Electromechanica' components for electronic equipment. Test methods. Test 12d: Resistance to sol- dering heat, solder bath method
JUS N.R4.494-1989 Electromechanical components for electronic equipment. Test methods. Test 16m: Unvvrapping, solderless vvrapped connection
JUS N.R4.458-1991 Electromechanical components for electronic equipment. Test methods. Test 15 e: Contact retention in insert, cable nutation

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electronic Tensile Testing Machine

GB/T 16491-1996 Electronic universal testing machines
GB/T 16491-2008 Electronic universal testing machine
GB/T 16491-2022 Electronic universal testing machine
GB/T 3871.3-1993 Test methods for agricultural wheeled and tracklying tractors Part 3: PTO power tests
GB/T 3871.4-1993 Test methods for agricultural wheeled and tracklaying tractors . Part 4: Hydraulic lifting capacity and power tests
GB/T 3871.14-2006 Agricultural tractors.Test procedures.Part 14: Partial power PTO--Non-mechanically transmitted power
GB/T 5170.16-1985 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Centrifugal machines for constant acceleration test
GB/T 13877.5-2003 Tractors and self-propelled machines for agriculture and forestry--Operator enclosure environment--Part 5: Pressurization system test method
GB/T 25388.2-2010 Double-fed converter of wind turbine generator system.Part 2:Test method
GB/T 5095.4-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 4: Dynamic stress tests
GB/T 5095.2-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
GB/T 9327-2008 Test methods and requirements for crimping and mechanical connecting fittings for conductors of power cables with rated voltage 35kV (Um=40.5kV) and below

National Metrological Verification Regulations of the People's Republic of China, Electronic Tensile Testing Machine

JJG 475-1986 Electronic Universal Testing Machine
JJG 475-2008 Verification Regulation of Electronic Universal Testing Machine

Professional Standard - Textile, Electronic Tensile Testing Machine

FZ/T 90006.1-1991 Test method for shuttles used in shuttle looms

Korean Agency for Technology and Standards (KATS), Electronic Tensile Testing Machine

KS B ISO 789-11:2002 Agricultural tractors－Test procedures－Part 11：Steering capability of wheeled tractors
KS B ISO 789-11-2002(2017) Agricultural tractors－Test procedures－Part 11：Steering capability of wheeled tractors
KS C IEC 60512-13-1:2005 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 13:Mechanical operating tests-Section 1:Test 13a:Engaging and separating forces
KS C IEC 60512-13-1:2014 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 13:Mechanical operating tests-Section 1:Test 13a:Engaging and separating forces
KS M ISO 3783:2008 Paper and board－Determination of resistance to picking－Accelerated speed method using the IGT-type tester(electric model)
KS C IEC 60512-13-1-2005(2010) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 13：Mechanical operating tests－Section 1：Test 13a：Engaging and separating forces
KS C IEC 60512-4-2002(2013) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 4：Dynamic stress tests
KS C IEC 60512-6-5-2002(2013) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 6：Dynamic stress tests－Section 5：Test 6e：Random vibration
KS C IEC 60512-4:2002 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 4:Dynamic stress tests
KS C IEC 60512-4:2014 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 4:Dynamic stress tests
KS C IEC 60512-13-2:2009 Connectors for electronic equipment-Tests and measurements-Part 13-2:Mechanical operation tests-Test 13b: Insertion and withdrawal forces
KS C IEC 60512-13-2:2014 Connectors for electronic equipment-Tests and measurements-Part 13-2:Mechanical operation tests-Test 13b: Insertion and withdrawal forces
KS C IEC 60512-2-2004(2009) Electromechanical components for electronic eqipment－Basic testing procedures and measuring methods－Part 2：General examination, electrical continuity and contact resistance tests, insulation tests and
KS C IEC 60512-19-3-2004(2009) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 19：Chemical resistance tests－Section 3：Test 19c－Fluid resistance
KS C IEC 60512-2:2004 Electromechanical components for electronic eqipment-Basic testing procedures and measuring methods-Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
KS C IEC 60512-2:2014 Electromechanical components for electronic eqipment-Basic testing procedures and measuring methods-Part 2:General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
KS C IEC 60512-6-5:2002 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 6:Dynamic stress tests-Section 5:Test 6e:Random vibration
KS C IEC 60512-6-5:2014 Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 6：Dynamic stress tests－Section 5：Test 6e：Random vibration

VN-TCVN, Electronic Tensile Testing Machine

TCVN 1773-11-1999 Agricultural tractors.Test procedures.Part11.Steering capability of wheeled tractors
TCVN 1773-5-1999 Agricultural tractors.Test procedures.Part5.Partial power PTO(Non-mechanically transmitted power)

Canadian Standards Association (CSA), Electronic Tensile Testing Machine

CSA M789.11-97-CAN/CSA-1997 Tracteurs Agricoles - Methodes D'Essai - Partie 11: Performances Du Dispositif De Direction Des Tracteurs A Roues

KR-KS, Electronic Tensile Testing Machine

KS B ISO 789-11-2022 Agricultural tractors — Test procedures — Part 11: Steering capability of wheeled tractors
KS C IEC 60512-13-2-2009 Connectors for electronic equipment－Tests and measurements－Part 13-2：Mechanical operation tests－Test 13b: Insertion and withdrawal forces

Association Francaise de Normalisation, Electronic Tensile Testing Machine

NF U10-210:1997 Agricultural tractors. Test procedures. Part 11 : steering capability of wheeled tractors.
NF C93-400-17-3*NF EN 60512-17-3:2011 Connectors for electronic equipment - Tests and measurements - Part 17-3 : cable clamping tests - Test 17c : cable clamp resistance to cable pull (tensile).
NF U03-021:1975 Agricultural tractors and self-propelled machines-. Test method for cab pressurization systems.
NF C93-400-13-1*NF EN 60512-13-1:2006 Connectors for electronic equipment - Tests and measurements - Part 13-1 : mechanical operation tests - Test 13a : engaging and separating forces
NF C93-400-13-1:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 13 : mechanical operating tests. Section 1 : test 13a : engaging and separating forces.
NF C93-400-15-4*NF EN 60512-15-4:2008 Connectors for electronic equipment - Tests and measurements - Part 15-4 : connector tests (mechanical) - Test 15d : contact insertion, release and extraction force
NF C93-400-6-5*NF EN 60512-6-5:2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6 : dynamic stress tests - Section 5 : test 6e : random vibration
NF C93-400-13-2*NF EN 60512-13-2:2006 Connectors for electronic equipment - Tests and measurements - Part 13-2 : mechanical operation tests - Test 13b : insertion and withdrawal forces.
NF C93-475-1:1997 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 13 : MECHANICAL OPERATING TESTS. SECTION 1 : TEST 13A : ENGAGING AND SEPARATING FORCES. (EUROPEAN STANDARD EN 60 512-13-1).
NF U34-135-2:2012 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2 : machines for use with back-pack power source.
NF C93-400-15-1*NF EN 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements - Part 15-1 : connector tests (mechanical) - Test 15a : contact retention in insert
NF C93-471-5*NF EN 61587-5:2014 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5 : seismic tests for chassis, subracks, and plug-in units
NF C93-400-19-3*NF EN 60512-19-3:1998 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 19 : chemical resistance tests. Section 3 : test 19c : fluid resistance.
NF C93-400-16-21*NF EN 60512-16-21:2012 Connectors for electronic equipment - Tests and measurements - Part 16-21 : mechanical tests on contacts and terminations - Test 16u : whisker test via the application of external mechanical stresses
NF C93-400-16-17*NF EN 60512-16-17:2009 Connectors for electronic equipment - Tests and measurements - Part 16-17 : mechanical tests on contacts and terminations - Test 16q : Tensile and compressive strength, fixed male tabs

Danish Standards Foundation, Electronic Tensile Testing Machine

DS/EN 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
DS/ISO 3463:1985 Agricultural and forestry wheeled tractors. Protective structures. Dynamic test method and acceptance conditions
DS/IEC 512-2:1987 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests

European Committee for Electrotechnical Standardization（CENELEC）, Electronic Tensile Testing Machine

EN 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
EN 60512-16-17:2008 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
EN 62047-8:2011 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films
EN 60512-16-11:2008 Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

CZ-CSN, Electronic Tensile Testing Machine

CSN 35 4055 Cast.9-1987 Electromechanical components for electronic equipment. Voltage stress tests

RO-ASRO, Electronic Tensile Testing Machine

STAS 9971-1989 Portable wooden ladders STRENGTH TESTS TO MECHANICAL STRES SES
STAS 9904/9-1982 ELECTRICAL ROTATING MACHINES TEST METHODS Determinalion of the moment of inertia of rotors

International Electrotechnical Commission (IEC), Electronic Tensile Testing Machine

IEC 61196-1-316:2005 Coaxial communication cables - Part 1-316: Mechanical test methods - Test for maximum pulling force of cable
IEC 60512-13-1:2006 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
IEC 60512-15-4:2008 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
IEC 60512-4:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4 : Dynamic stress tests
IEC 60512-6-5:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration
IEC 60512-13-2:2006 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal force
IEC 60512-16-21:2012 Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses
IEC 60512-2:1985 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 2 : General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
IEC 61587-5:2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks, and associated plug-in units
IEC 60512-2/AMD1:1994 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests; Amendment 1
IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
IEC 60512-16-11:2008 Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Electronic Tensile Testing Machine

GB/T 17737.316-2018 Coaxial communication cables—Part 1-316:echanical test methods—Test for maximum pulling force of cable

国家能源局, Electronic Tensile Testing Machine

NB/T 10318-2019 Type test outline for complete sets of electronic control equipment for wind turbines
NB/T 31101.2-2016 Plate coolers for wind turbines Part 2: Test methods
NB/T 31143-2018 Technical specifications for type testing of main shaft bearings of direct drive wind turbines
NB/T 31141-2018 Technical specifications for type testing of yaw and pitch bearings of direct-drive wind turbines

PL-PKN, Electronic Tensile Testing Machine

PN R36124-1991 Wheeled tractors for agriculture and forestry.Protective structures.Dynamic test method and acceptance conditions
PN T05122-1986 Electromechanical components for electronic e?uipment; basie testingprocedures and measuring methods General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests

Professional Standard - Aviation, Electronic Tensile Testing Machine

HB 6699-1993 Format of qualification test and quality conformance test procedure for airborne electronic equipment

British Standards Institution (BSI), Electronic Tensile Testing Machine

BS EN 60512-15-4:2008 Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15d. Contact insertion, release and extraction force
BS EN 60512-13-1:2006 Connectors for electronic equipment — Tests and measurements — Part 13-1: Mechanical operation tests — Test 13a: Engaging and separating forces
BS EN 60512-6-5:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Dynamic stress tests - Test 6e - Random vibration - Section 5: Test 6e: Random vibration
BS EN 60512-13-2:2006 Connectors for electronic equipment — Tests and measurements — Part 13-2: Mechanical operation tests — Test 13b: Insertion and withdrawal forces
BS EN 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements - Endurance tests - Test 9a - Mechanical operation
BS EN 61788-6:2011 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN 61587-5:2014 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Seismic tests for chassis, subracks and plug-in units
BS EN 60512-16-21:2012 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16u. Whisker test via the application of external mechanical stresses
23/30429595 DC BS ISO 22484. Displacement and dynamic compressors. Performance test code for electric driven low-pressure air compressor packages
BS EN 60512-16-11:2008 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16k. Stripping force, solderless wrapped connections
BS EN 60512-16-17:2008 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations – Test 16q: Tensile and compressive strength, fixed male tabs
BS EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Mechanical tests on contacts and terminations - Test 16e - Gauge retention force (resilient contacts)
BS EN 60512-16-9:2008 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force
BS EN 88528-11:2004 Reciprocating internal combustion engine driven alternating current generating sets - Rotary uninterruptible power systems - Performance requirements and test methods
BS EN 88528-11:2005 Reciprocating internal combustion engine driven alternating current generating sets. Rotary uninterruptible power systems. Performance requirements and test methods

Japanese Industrial Standards Committee (JISC), Electronic Tensile Testing Machine

JIS C 5402-13-1:2002 Connectors for electronic equipment -- Tests and measurements -- Part 13-1: Mechanical operating tests -- Test 13a: Engaging and separating forces
JIS C 5402-13-1:2015 Connectors for electronic equipment -- Tests and measurements -- Part 13-1: Mechanical operation tests -- Test 13a: Engaging and separating forces
JIS B 3411:1992 Numerically controlled draughting machines -- Drawing test -- Part 1: Electromechanical plotters
JIS C 5402-15-4:2014 Connectors for electronic equipment -- Tests and measurements -- Part 15-4: Connector tests (mechanical tests) -- Test 15d: Contact insertion, release and extraction force
JIS C 5402-13-2:2012 Connectors for electronic equipment -- Tests and measurements -- Part 13-2: Mechanical operation tests -- Test 13b: Insertion and withdrawal forces
JIS C 5402-16-4:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-4: Mechanical tests on contacts and terminations -- Test 16d:Tensile strength (crimped connections)
JIS C 5402-16-9:2015 Connectors for electronic equipment -- Tests and measurements -- Part 16-9: Mechanical tests on contacts and terminations -- Test 16i: Grounding contact spring holding force

未注明发布机构, Electronic Tensile Testing Machine

BS EN 60512-13-1:2006(2007) Connectors for electronicequipment — Tests and measurements — Part 13 - 1 : Mechanical operation tests — Test 13a : Engaging and separating forces

Military Standard of the People's Republic of China-General Armament Department, Electronic Tensile Testing Machine

GJB 5593-2006 Code of range test for fighter self-protection EW system

European Committee for Standardization (CEN), Electronic Tensile Testing Machine

EN 60512-13-2:2006 Connectors for electronic equipment — Tests and measurements — Part 13-2: Mechanical operation tests — Test 13b: Insertion and withdrawal forces
EN 60512-15-4:2008 Connectors for electronic equipment — Tests and measurements — Part 15-4: Connector tests (mechanical) — Test 15d: Contact insertion, release and extraction force
prHD 25395.3-1986 Power lawn mowers, lawn tractors and lawn and garden tractors with mowing attachments; safety requirements and test procedures; part 3: requirements for rotary mowers

German Institute for Standardization, Electronic Tensile Testing Machine

DIN 1873-1:2016 Powered lawn mowers - Performance characteristics, requirements and testings - Part 1: Pedestrian controlled rotary mowers - Combustion engine, electrically or battery powered
DIN EN 60512-15-4:2009 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force (IEC 60512-15-4:2008); German version EN 60512-15-4:2008
DIN EN 60512-17-3:2011 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) (IEC 60512-17-3:2010); German version EN 60512-17-3:2010
DIN EN 60512-15-3:2009 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (IEC 60512-15-3:2008); German version EN 60512-15-3:2008
DIN EN 60512-16-4:2009 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (IEC 60512-16-4:2008); German version EN 60512-16-4:2008
DIN EN 60512-16-20:1997 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations; section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IEC 6
DIN EN 60512-6-5:2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests; section 5: Test 6e: Random vibration (IEC 60512-6-5:1997, modified); German version EN 60512-6-5:1999
DIN EN 60512-13-2 Berichtigung 1:2008 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006); German version EN 60512-13-2:2006, Corrigendum to DIN EN 60512-13-2:2006-11; German ver
DIN EN 60512-13-1 Berichtigung 1:2008 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006); German version EN 60512-13-1:2006, Corrigendum to DIN EN 60512-13-1:2006-11; German vers
DIN EN 60512-13-2:2006 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006); German version EN 60512-13-2:2006
DIN EN 60512-13-1:2006 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006); German version EN 60512-13-1:2006
DIN EN 60512-16-17:2009 Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs (IEC 60512-16-17:2008); German version EN 60512-16-17:2008
DIN EN 60512-16-11:2009 Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections (IEC 60512-16-11:2008); German version EN 60512-16-11:2008
DIN EN 60512-6-5:2000-10 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests; section 5: Test 6e: Random vibration (IEC 60512-6-5:1997, modified); German version EN 60512-6-5:1999

国家市场监督管理总局、中国国家标准化管理委员会, Electronic Tensile Testing Machine

GB/T 25388.2-2021 Wind turbines generator system—Double-fed converter—Part 2: Test method

Society of Automotive Engineers (SAE), Electronic Tensile Testing Machine

SAE J283-2009 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch
SAE J283-2019 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch

International Organization for Standardization (ISO), Electronic Tensile Testing Machine

ISO 11680-2:2021 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Machines for use with backpack power source

Professional Standard - Railway, Electronic Tensile Testing Machine

TB/T 2791-1997 Specifications for test benches for multi-piston air compressors for internal combustion and electric locomotives

IN-BIS, Electronic Tensile Testing Machine

Professional Standard - Electron, Electronic Tensile Testing Machine

SJ/T 11188-1998 Basic parameter requirements and test methods for electronic tuners for cable television receivers

CENELEC - European Committee for Electrotechnical Standardization, Electronic Tensile Testing Machine

EN 60512-13-1:1997 Electromechanical Components for Electronic Equipment; Basic Testing Procedures and Measuring Methods; Part 13: Mechanical Operating Tests; Section 1: Test 13a: Engaging and Separating Forces

工业和信息化部, Electronic Tensile Testing Machine

JB/T 8888-2018 Test method for measuring residual stress of steam turbine and turbine generator rotor forgings by ring core method