High-quality instrument design

High-quality instrument design, Total:151 items.

In the international standard classification, High-quality instrument design involves: Motor cycles and mopeds, Geology. Meteorology. Hydrology, Mining equipment, Horology, Document imaging applications, On-board equipment and instruments, Metrology and measurement in general, Nuclear energy engineering, Applications of information technology, Equipment for the chemical industry, Solar energy engineering, Shipbuilding and marine structures in general, Measurement of volume, mass, density, viscosity, Postal services, Medical equipment, Radiation measurements, Graphical symbols, Telecommunication terminal equipment, Electricity. Magnetism. Electrical and magnetic measurements, Transport, Linear and angular measurements, Characteristics and design of machines, apparatus, equipment, Aircraft and space vehicles in general, Radiation protection, Cereals, pulses and derived products, Measurement of fluid flow, Fluid storage devices, Aerospace engines and propulsion systems, Water quality, Graphic technology, Non-destructive testing, Quality, Industrial automation systems, Equipment for entertainment, Welding, brazing and soldering.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., High-quality instrument design

ASHRAE 3795-1994 Optimal Design of a Cold-Sea-Water Chiller
ASHRAE 3677-1993 Design and Simulation of a Sub-Optimal Controller for Space Heating
ASHRAE 4323-2000 Comparison of Binary Mixture Heat and Mass Transfer Analysis with Single-Component Heat and Mass Transfer Analysis in the Design of GAX Absorber/Desorber

Indonesia Standards, High-quality instrument design

SNI 09-3762-1995 Symbols for controls, indicators and tell-tales for motor cycles

US-FCR, High-quality instrument design

FCR NE-F-3-11T-1972 MASS SPECTROMETER HELIUM LEAK DETECTION FOR INSTRUMENTS AND SMALL COMPONENTS (INACTIVE FOR NEW DESIGN)

Professional Standard - Geology, High-quality instrument design

DZ/T 0163-1995 Classification and numbering method for product design documents of geological instruments
DZ/T 0198.5-1997 Guidelines for process management of geological instruments and process specification design
DZ/T 0198.4-1997 Geological Instrument Process Management Guidelines Process Scheme Design
DZ/T 163-1995 Classification and numbering method for product design documents of geological instruments
DZ/T 0138-1994 Standardization review of geological instrument product drawings and design documents
DZ/T 0198.3-1997 Geological Instrument Process Management Guidelines Product Design Manufacturability Review and Process Quality Review

GOSTR, High-quality instrument design

GOST 34233.10-2017 Vessels and apparatus. Norms and methods of strength calculation. Vessels and apparatus involving hуdrogen sulphide media
GOST R 58435-2019 Design and development of gas, gas-condensate, oil-gas and oil-gas-condensate fields. Exchange of geological and technological data in the process of monitoring, management and optimization of hydrocarbon production

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, High-quality instrument design

GB/T 34839-2017 Timekeeping instruments—Designs and dimensions of crowns and sealed tubes

German Institute for Standardization, High-quality instrument design

DIN 8235-1:1989-07 Classification and design of time keeping instruments; terms of types of watches and clocks
DIN 28058-2:1989-01 Lead used in apparatus engineering; lead of semi-finished product designs
DIN 28058-2:1989 Lead used in apparatus engineering; lead of semi-finished product designs
DIN EN 60987:2010 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (IEC 60987:2007, modified); German version EN 60987:2009
DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
DIN IEC 60987:2008 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (IEC 60987:2007)
DIN 6855-11:2001 Quality control of nuclear medicine instruments - Part 11: Constancy testing of activity meter
DIN 4000-166:2010 Tabular layouts of properties - Part 166: Manual measuring devices for geometrical quantities
DIN 43802-3:1991-01 Line scales and pointers for indicating electrical measuring instruments; designs and dimensions
DIN EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (IEC 60987:2007 + A1:2013); German version EN 60987:2015
DIN EN 62817:2015 Photovoltaic systems - Design qualification of solar trackers (IEC 62817:2014); German version EN 62817:2015
DIN 42600-7:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 7: Voltage Transformers U<(Index)m> to 12 kV - Small design, main dimensions, indoor type
DIN EN 1825-1:2004 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
DIN EN 62817:2018 Photovoltaic systems - Design qualification of solar trackers (IEC 62817:2014 + A1:2017); German version EN 62817:2015 + A1:2017

SAE - SAE International, High-quality instrument design

SAE ARP582A-1967 Lighting@ Integral@ for Aircraft Instruments: Criteria for Design of Red Lighted Instruments
SAE ARP582C-2006 Lighting@ Integral@ For Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments
SAE ARP582B-2001 LIGHTING, INTEGRAL, FOR AIRCRAFT INSTRUMENTS: CRITERIA FOR DESIGN OF RED LIGHTED INSTRUMENTS
SAE ARP798B-2017 Design Criteria for White Incandescent Lighted Aerospace Instruments

Society of Automotive Engineers (SAE), High-quality instrument design

SAE ARP582A-1991 LIGHTING, INTEGRAL, FOR AIRCRAFT INSTRUMENTS: CRITERIA FOR DESIGN OF RED LIGHTED INSTRUMENTS
SAE ARP582D-2012 Lighting, Integral, for Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments
SAE ARP798-1965 Design Criteria for White Incandescent Lighted Aerospace Instruments
SAE ARP798-1991 DESIGN CRITERIA FOR WHITE INCANDESCENT LIGHTED AEROSPACE INSTRUMENTS
SAE ARP798A-2012 Design Criteria for White Incandescent Lighted Aerospace Instruments
SAE ARP4104-1988 Design Objectives for Handling Qualities of Transport Aircraft [Superseded: SAE ARP 842C]
SAE AS970B-1993 Drive-Accessory, (203.2) 8.000 BC Round, QAD, Design Standard for
SAE AS971B-1993 Drive-Accessory, (254) 10.000 BC Round, QAD, Design Standard for

GSO, High-quality instrument design

GSO ISO 12029:2015 Document management -- Machine-readable paper forms -- Optimal design for user friendliness and electronic document management systems (EDMS)
GSO BS 3693:2010 Recommendations for design of Scale, and indexes on analogue indicating instruments
BH GSO ISO 12029:2017 Document management -- Machine-readable paper forms -- Optimal design for user friendliness and electronic document management systems (EDMS)
BH GSO IEC 61582:2016 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment

GB-REG, High-quality instrument design

REG NASA-LLIS-0702--2000 Lessons Learned ?Magnetic Design Control for Science Instruments

Professional Standard - Ocean, High-quality instrument design

HY/T 026-1992 Protection design and installation of marine instrument (equipment) sacrificial anode

Standard Association of Australia （SAA）, High-quality instrument design

AS/NZS ISO 12029:2014 Document Management Machine-readable paper forms User-friendliness and optimized design of Electronic Document Management Systems (EDMS)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, High-quality instrument design

GB/T 12809-2015 Principles of design and construction of laboratory glassware glass measuring vessels
GB/Z 41476.4-2022 Non-destructive testing instruments—Radiation protection rules for the technical application of X-ray equipment up to 1 MV—Part 4:Caculation of control area

Association Francaise de Normalisation, High-quality instrument design

NF C19-200:2009 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems.
NF C19-200*NF EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
NF EN ISO 384:2016 Glass or plastic laboratory equipment - Principles of design and construction of volumetric instruments
NF EN 62808/A1:2019 Nuclear power plants - Instrumentation and control systems important for safety - Design and qualification of isolation devices
NF EN 62808:2016 Nuclear power plants - Instrumentation and control systems important for safety - Design and qualification of isolation devices
NF EN 62467-1:2015 Electromedical devices - Dosimetry instruments used in brachytherapy - Part 1: instruments designed for well ionization chambers
NF EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring instruments: retractable stem comparators with digital display - Design characteristics and metrological characteristics
NF EN 60645-5:2005 Electroacoustics - Audiometric equipment - Part 5: instruments for measuring aural impedance or admittance (impedance meters or admittance meters)
NF P16-500-1*NF EN 1825-1:2004 Grease separators - Part 1 : principles of design, performance and testing, marking and quality control

RO-ASRO, High-quality instrument design

STAS 9057/3-1971 ELFXTROMKDICAL APPARATUS AND KQUIPMKNT Rules and niotho/Is for quality control
STAS 9057/3-1971-1 ELECTROMEDICAL APPARATUS AND EQUIPMENT Rules and methods for quality control

Institute of Electrical and Electronics Engineers (IEEE), High-quality instrument design

IEEE 467-1980 IEEE Standard Quality Assurance Program Requirements for the Design and Manufacture of Class 1E Instrumentation and Electric Equipment for Nuclear Power Generating Stations
IEEE Std 2402-2017 IEEE Standard Design Criteria of Complex Virtual Instruments for Ocean Observation
IEEE P2735.1/D4.0, July 2022 IEEE Draft Standard Design Criteria of Complex Virtual Instruments for Household Appliance Test
IEEE P2735.1/D4.1, August 2022 IEEE Draft Standard Design Criteria of Complex Virtual Instruments for Household Appliance Test
IEEE 1687-2014 Access and Control of Instrumentation Embedded within a Semiconductor Device (IEEE Computer Society)
IEEE/ANSI N42.50-2022 American National Standard Performance Specifications for Instrumentation Systems Designed for Measuring Radon Progeny in Air
ANSI N42.50-2022 American National Standard Performance Specifications for Instrumentation Systems Designed for Measuring Radon Progeny in Air
IEEE N42.18-1980 Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents Redesignation of N13.10-74(ANSI/IEEE) R(1991)

PL-PKN, High-quality instrument design

PN T06702-1992 Power and energy measuring detectors, instruments and e?uipment for laser radiation

International Electrotechnical Commission (IEC), High-quality instrument design

IEC 62817:2014 Photovoltaic systems - Design qualification of solar trackers
IEC 60987:2007 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
IEC 62817:2014/AMD1:2017 Photovoltaic systems - Design qualification of solar trackers
IEC 60988:2009 Nuclear power plants - Instrumentation important to safety - Acoustic monitoring systems for detection og loose parts: characteristics, design criteria and operational procedures
IEC/IEEE 62582-5-2015 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 5: Optical time domain reflectometry
IEC/IEEE 62582-5:2015 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 5: Optical time domain reflectometry

British Standards Institution (BSI), High-quality instrument design

BS EN 62817:2015 Photovoltaic systems. Design qualification of solar trackers
BS EN 13850:2012 Postal Services. Quality of Services. Measurement of the transit time of end-to-end services for single piece priority mail and first class mail
BS EN 13850:2002 Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail
BS EN 13850:2020 Postal Services. Quality of Services. Measurement of the transit time of end-to-end services for single piece priority mail and first class mail
BS EN ISO 7971-2:2019 Cereals. Determination of bulk density, called mass per hectolitre. Method of traceability for measuring instruments through reference to the international standard instrument
BS PD ISO/TS 18684:2015 Timekeeping instruments. Watch external parts made of hard materials. General requirements and test methods
BS IEC 60988:2009 Nuclear power plants - Instrumentation important to safety - Acoustic monitoring systems for detection of loose parts: Characteristics, design criteria and operational procedures

未注明发布机构, High-quality instrument design

IEC 62817:2017 Photovoltaic systems - Design qualification of solar trackers
DIN 4000-166 E:2009-01 Tabular layouts of properties - Part 166: Manual measuring devices for geometrical quantities
DIN EN 28265:1994 Water quality; Design and use of quantitative samplers for benthic macro-invertebrates on stony substrates in shallow freshwaters

RU-GOST R, High-quality instrument design

GOST R IEC 60987-2011 Nuclear power plants. Instrumentation and control systems important to safety. Hardware design requirements for computer-based systems
GOST 2.740-1989 Unified system of design documentation. Graphical conventions in diagrams. Apparatus and telegraph repeaters
GOST 8.021-2015 State system for ensuring the uniformity of measurements. State verification schedule for mass measuring instruments
GOST 2.729-1968 Unified system for design documentation. Graphic identifications in schemes. Electromeasuring apparatus
GOST 8.374-2013 State system for insuring the uniformity of measurements. State verification schedule for instruments measuring the volumetric and mass flow (volume and mass) of water
GOST 2.793-1979 Unified system for design documentation. Graphic designations. Components and arrangements of machines and apparatus of chemical industry. General symbols
GOST 4.301-1985 System of product-quality indices. Functional sets, instruments, devices, units, modules of control and regulation modular means. Nomenclature of indices
GOST 8.652-2016 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration of dissolving in water gasses (oxygen, hydrogen)
GOST R 8.766-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration dissolving in water gasses (oxygen, hydrogen)

International Organization for Standardization (ISO), High-quality instrument design

ISO 21851:2020 Marine technology — Ocean observation systems — Design criteria of ocean hydro-meteorological observation systems reuse and interaction
ISO/TS 18684:2015 Timekeeping instruments - Watch external parts made of hard materials - General requirements and test methods
ISO/CD 24427 Radiological protection — Medical proton accelerators — Requirements and recommendations for shielding design and evaluation
ISO/DIS 25178-601:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Design and characteristics of contact (stylus) instruments
ISO/DIS 25178-603:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments

PH-BPS, High-quality instrument design

PNS ISO 384:2021 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments

SCC, High-quality instrument design

DANSK DS/EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
NS-EN ISO 384:2015 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments (ISO 384:2015)
DIN EN ISO 384 E:2013 Draft Document - Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO/DIS 384:2013); German version prEN ISO 384:2013
AENOR UNE-EN ISO 384:2016 Laboratory glass and plastic material. Principles of design and manufacturing of volumetric instruments. (ISO 384:2015).

Professional Standard - Aviation, High-quality instrument design

HB 7504.13-1997 Data Requirements for Flight Simulator Design and Performance Flight Instruments
HB 6247.10-1989 Basic product drawing management system (apparatus, electrical appliances) Borrowing method of design drawings

European Committee for Electrotechnical Standardization（CENELEC）, High-quality instrument design

EN 60987:2009 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
EN 62138:2009 Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions

Professional Standard - Nuclear Industry, High-quality instrument design

EJ 530-1990 Quality assurance program requirements for the design and manufacture of safety-level instruments and electrical equipment in nuclear power plants

AENOR, High-quality instrument design

UNE-EN ISO 15212-2:2003 Osscilation-type density meters. Part 2: Process instruments for homogenous liquids. (ISO 15212-2:2002)
UNE-EN 1825-1:2005 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control

Korean Agency for Technology and Standards (KATS), High-quality instrument design

KS C IEC 60987-2014(2019) Nuclear power plants — Instrumentation and control important to safety — Hardware design requirements for computer-based systems
KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
KS C IEC 61582-2022 Radiation protection instrumentation－In vivo counters－Classification, general requirements and test procedures for portable, transportable and installed equipment
KS C IEC 60988:2012 Nuclear power plants-Instrumentation important to safety- Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures
KS I ISO 8265-2007(2012) Water quality－Design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters
KS C IEC 61582-2012(2017) Radiation protection instrumentation－In vivo counters－Classification, general requirements and test procedures for portable, transportable and installed equipment
KS C IEC 61582-2012(2022) Radiation protection instrumentation－In vivo counters－Classification, general requirements and test procedures for portable, transportable and installed equipment
KS C IEC 62467-1:2012 Medical electrical equipment－Dosimetric instruments as used in brachytherapy－Part 1：Instruments based on well-type ionization chambers

IX-ICAO, High-quality instrument design

ICAO 9906-5-2012 Quality Assurance Manual for Flight Procedure Design - Volume 5: Validation of Instrument Flight Procedures

ES-UNE, High-quality instrument design

UNE-EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)
UNE-EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment (IEC 61582:2004, modified) (Endorsed by AENOR in November of 2006.)

KR-KS, High-quality instrument design

KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments

United States Navy, High-quality instrument design

NAVY MIL-P-24423 NOTICE 1-2000 PROPULSION AND AUXILIARY CONTROL CONSOLES AND ASSOCIATED CONTROL AND INSTRUMENTATION EQUIPMENT, NAVAL SHIPBOARD USE, BASIC DESIGN REQUIREMENTS
NAVY MIL-P-24423 (1)-1978 PROPULSION AND AUXILIARY CONTROL CONSOLES AND ASSOCIATED CONTROL AND INSTRUMENTATION EQUIPMENT, NAVAL SHIPBOARD USE, BASIC DESIGN REQUIREMENTS
NAVY MIL-P-24423-1970 PROPULSION AND AUXILIARY CONTROL CONSOLES AND ASSOCIATED CONTROL AND INSTRUMENTATION EQUIPMENT, NAVAL SHIPBOARD USE, BASIC DESIGN REQUIREMENTS

American Society for Testing and Materials (ASTM), High-quality instrument design

ASTM D7282-21 Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
ASTM D7282-21e1 Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
ASTM F1839-08 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
ASTM F1839-97 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
ASTM F1839-08(2016) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
ASTM F1839-08(2021) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
ASTM F1443-93(2003) Standard Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images
ASTM E1025-05 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
ASTM F1193-97 Standard Practice for An Amusement Ride and Device Manufacturer Quality Assurance Program
ASTM F1839-08e2 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments

YU-JUS, High-quality instrument design

JUS B.E4.350-1987 Laboratory glassvvare. General quality reguirements of design and construction of volumetric glassvvare

Association of German Mechanical Engineers, High-quality instrument design

DVS 2205-1 Beiblatt 20-2006 Calculated PVDF media list for containers and equipment made of thermoplastics
DVS 2216-1-2007 "Ultrasonic welding of plastic series parts - Process description, machines and devices, influencing variables, design and quality assurance"

IN-BIS, High-quality instrument design

IS 8525-1977 The design of the linear scale and index used to indicate the instrument recommends a reading resolution of 0.33-1.25%

European Committee for Standardization (CEN), High-quality instrument design

EN 13850:2002 Postal service - Quality of service - Measurement of the transit time of end-to end-services for single piece priority mail and first class mail Incorporates Amendment 1: 2007
EN 1825-1:2004 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control

Danish Standards Foundation, High-quality instrument design

DS/EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
DS/EN 1825-1/AC:2006 Grease separators – Part 1: Principles of design, performance and testing, marking and quality control
DS/EN 1825-1:2005 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control

Lithuanian Standards Office , High-quality instrument design

LST EN 1825-1-2004 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control
LST EN 1825-1-2004/AC-2006 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control
LST EN 61582-2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment (IEC 61582:2004, modified)

IT-UNI, High-quality instrument design

UNI 5462-1964 No welded steel pipe. Boiler pipes. Instrument piping and piping for high pressure and high temperature thermal equipment. Quality, regulations and testing