ZH
RU
ES

Deuterium lamp power

Deuterium lamp power, Total:477 items.

In the international standard classification, Deuterium lamp power involves: Lamps and related equipment, Fishing and fish breeding, Electronic tubes, Semiconductor devices, Aerospace electric equipment and systems, Electricity. Magnetism. Electrical and magnetic measurements, Construction of waterways and ports, Acoustics and acoustic measurements, Floor treatment appliances, Optoelectronics. Laser equipment, Electrical accessories, Special measuring equipment for use in telecommunications, Fibre optic communications, Telecommunication systems, Rotating machinery, Electrical wires and cables, Insulating materials, Shipbuilding and marine structures in general, Installations in buildings, Radiocommunications, Solar energy engineering, Audio, video and audiovisual engineering, Rectifiers. Convertors. Stabilized power supply, Flexible drives and transmissions, Equipment for entertainment, Capacitors, Electronic components in general, Coals, Information technology (IT) in general, Components and accessories for telecommunications equipment, Agricultural machines, implements and equipment, Materials for aerospace construction, Road vehicle systems, Ventilators. Fans. Air-conditioners, Domestic, commercial and industrial heating appliances, Valves, Nuclear energy engineering, Protection against fire, Internal combustion engines for road vehicles, Television and radio broadcasting, Continuous handling equipment, Electric road vehicles, Non-ferrous metals, Energy and heat transfer engineering in general, Characteristics and design of machines, apparatus, equipment, Earth-moving machinery, Resistors, Alarm and warning systems, Office machines, Power transmission and distribution networks, Products of the textile industry, Conducting materials.

Fujian Provincial Standard of the People's Republic of China, Deuterium lamp power

DB35/T 1296-2012 High Power LED Street Light
DB35/T 1209-2011 High Power Self Ballasted Fluorescent Lamps

HU-MSZT, Deuterium lamp power

Group Standards of the People's Republic of China, Deuterium lamp power

T/GBG 0001-2019 Radiator for high-power LED mining lamp
T/CIES 026-2020 Intelligent lighting equipment — Non-active mode power measurement

Zhejiang Provincial Standard of the People's Republic of China, Deuterium lamp power

DB33/T 2138-2018 Requirements for the maximum total power of light purse seine fishing lights

RO-ASRO, Deuterium lamp power

STAS 9183-1985 SIGNALLING ELECTRIC INCANDESCENT LAMPS Rated voltages and powers
STAS 3009-1990 Common electric incandescent lamps. Nominal voltages and powers
STAS 10876/3-1984 Aircraft electrical filament lamps MIX1ATURE LAMPS FOR POWERS UP TO 5 W INCLUDING Special technical requirements for qualily
STAS 10876/4-1984 Aircraft electrical filament lamps. MINIATURE LAMPS FOR POWERS OVER 5 W. Special technical requirements for quality.
STAS 8790-1981 Fire precautions DETERMINATION OF THE CALORIFIC POWER
STAS 11093-1984 SINGLE SCOOP HYDRAULIC EXCAVATORS Digging powers. Definitions
STAS 12644-1988 VISUAL NON-DESTRUCTIVE TESTING Selection of low power magnifiers
STAS R 12007/5-1986 EQUIPMENTS RELIABILITY Compliance test plans for success ratio

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Deuterium lamp power

GB/T 23142-2008 Preset power controller for high pressure sodium lamps.Performance requirements
GB/T 3307-1982 Method of heater intermittent test of low-power electronic tubes
GB 3307-1982 Small power electronic tube filament intermittent test method
GB/T 32483.1-2016 Energy performance of lamp controlgear.Part 1:Controlgear for fluorescent lamps.Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
GB/T 42219-2022 Optical measurement of high-power LED
GB/T 22264.3-2008 Mounted digital display electric measuring instruments.Part 3:Special requirements for wattmeters and varmeters
GB/T 22264.3-2022 Mounted digital display electric measuring instruments—Part 3：Special requirements for wattmeters and varmeters
GB/T 32483.3-2016 Energy performance of lamp controlgear.Part 3:Controlgear for halogen lamps and LED modules.Method of measurement to determine the efficiency of the controlgear
GB 12350-2000 Safety requirments of small power motors
GB/T 11355-1989 V-belt drives--Calculation of power ratings
GB 12350-1990 Safety requirements of small power moters
GB/T 12350-2009 Safety requirements of small-powder motors
GB 12350-2009 Safety requirements of small-powder motors
GB 11355-1989 V-belt drives－Calculation of power ratings
GB/T 7966-1987 Acoustics--Ultrasonic power measurement in the frequency range 0.5~10MHz
GB/T 12855-1991 Application and care for small power transmitting tubes
GB/T 6257-1986 Blank detail specification for small power transmitting tubes of anode dissipation up to 1kW
GB/T 3770-1983 Determination of sound power level for noise emitted by wood working machinery
GB 3770-1983 Determination of sound power level of noise from woodworking machine tools
GB/T 3789.8-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of maximum anode dissipation power and anode overload dissipation power
GB 4215-1984 Determination of sound power levels of noise emitted by metal cutting machine tools
GB/T 7617-1987 Power levels for data transmission over telephone lines
GB/T 9069-1988 Determination of sound power level for noise emitted by reciprocating pump--Engineering method
GB/T 4215-1984 Determination of sound power levels of noise emitted by metal-cutting machine tools
GB/T 11355-2008 V-belt and V-ribbed belt drives.Calculation of power ratings
GB/T 9069-2008 Engineering method for measuring sound power level of reciprocating pump noise
GB/T 7676.3-1998 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters

未注明发布机构, Deuterium lamp power

BS EN 50294:1998(2003) Measurement method of total input power of ballast - lamp circuits
BS IEC 62792:2015(2020) Measurement method for the output of electroshock weapons

RU-GOST R, Deuterium lamp power

GOST 19438.14-1975 Method of measurement of output power and non-linear distertiens of electronic tubes and valves under test in the conditions of low-frequeneq amplification
GOST 19438.18-1978 Low-power electronic tubes. Test methods for multiple switching on and swit ching off the heating voltage
GOST 8.569-2000 State system for ensuring the uniformity of measurements. Low power SHF vattmeters of frequency range 0,02-178,6 GHz. Verification and calibration methods
GOST 25786-1983 Lasers. Measuring methods of average power, pulse average power, relative average power instability
GOST R 51677-2000 Asynchronous electrical machines of power from 1 to 400 kVt inclusive. Motors. Efficiency and power factor
GOST 8.397-1980 State system for ensuring the uniformity of measurements. Waveguide puise low-power meters at frequency range 5,64-37,5 GHz. Methods and menas of verifications
GOST 31605-2012 Asynchronous electrical mashines of power from 1 to 400 kW inclusive. Motors. Efficiency and power factors
GOST 21106.5-1977 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Methods of measurement of filament current and voltage
GOST 6433.4-1971 Solid electrical insulating materials. Methods for evaluation of dielectric power factor and permittivity at power (50 Hz) frequency
GOST 21106.16-1979 Oscillator tubes with anode dissipated power above 25 W. Measurement methods of power, input voltage and determination frequency characteristics
GOST 21106.1-1975 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Test method for multiple switching on and switching off the heating voltage
GOST R 54992-2012 Lamps for household use. Methods for determination of energy efficiency
GOST 14868-1997 Electric motor frequency convertors with rated power up to 200 kW and frequency to 20000 Hz. Basic parameters
GOST 14868-1972 Electric motor convertors with rated power from 8 to 200 kW and frequency from 1000 hz and above Frincipal quantities. Basic parameters
GOST 20398.14-1988 Field-effect transistors. Method of measuring output power, power gain and drain efficiency
GOST 8090-1973 Receiving and transmitting tubes and valves with long anode dissipation up to 25 W. Method of measurement of filament or heater voltage and current
GOST 19438.7-1975 Electron low power tubes; Measuring method for steepuess of characteristic
GOST 19438.9-1975 Low-power electronic tubes and valves. Method of measurements of plate resistance
GOST 19438.20-1979 Low powered electronic tubes. Method for measurement of the temperature of the bulb
GOST 30749-2001 Agricultural tractors. Measurement of the driving axles power
GOST 16313-1997 Electric motor frequency convertors with rated power up to 200 kW and frequency to 20000 Hz. General specifications
GOST 16312-1997 Electric motor frequency convertors with rated power up to 200 kW and frequency to 20000 Hz. Test methods
GOST 34184-2017 Electric power systems. Operational dispatching control. Frequency control and control of active power in interconnected power system. General requirements
GOST 19438.16-1977 Low-power vacuum valves. Methods for measurement of input resistance
GOST 1284.3-1996 V-belts of standart cross-sections. Transmitted powers
GOST 1284.3-1980 V-belts of standard cross-sections. Calculation of transmissions and transmitted powers
GOST 8.551-1986 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring electric power and power factor over the frequency range 40-20000 Hz

Professional Standard - Light Industry, Deuterium lamp power

QB/T 2941-2008 Preset-power reactor ballasts for high pressure sodium lamps
QB/T 4352-2012 Current-limiting reactor for high pressure sodium lamps preset-power
QB/T 3918-1999 Determination of sound power level for noise emitted by leather machinery

CH-SNV, Deuterium lamp power

BE-NBN, Deuterium lamp power

NBN 714-1966
NBN-EN 60051-3-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 3: Special requirements for wattmeters and varmeters
NBN-ISO 6926:1992 Acoustics. Determination of sound power levels of noise sources. Requirements for the performance and calibration of reference sound sources
NBN 636-1965

Korean Agency for Technology and Standards (KATS), Deuterium lamp power

KS C 5216-2002 RELIABILITY ASSURED LOW FREQUENCY POWER TRANSISTORS (MEDIUM AND HIGH POWER)
KS C IEC 61315:2020 Calibration of fiber-optic power meters
KS C IEC 61315:2014 Calibration of fiber-optic power meters
KS C 6705-2002 MEASURING METHODS FOR LASER OUTPUT POWER
KS C 1205-1978(2000) PULSE DEVICES OF ELECTRIC ENERGY METERS
KS C 6928-1995(2020) Test methods of optical power meters for optical fiber
KS C IEC 62301-2017(2022) Household electrical appliances－Measurement of standby power
KS C IEC 60244-2:2008 Methods of measurement for radio transmitters－Part 2：Bandwidth, out-of-band power and power of non-essential oscillations
KS C 6706-1993(1998) TEST METHODS OF OPTICAL POWER METERS FOR LASER BEAM
KS E ISO 335-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS C IEC 60072-3:2005 Dimensions and output series for rotating electrical machines－Part 3：Small built-in motors－Flange numbers BF10 to BF50
KS A 0704-1990(2000) PRECISION METHODS FOR THE DETERMINATION OF SOUND POWER LEVEL IN REVERBERATION ROOMS
KS C 5201-1980(2000) RELIABILITY ASSURED HIGH FREQUENCY LOW POWER TRANSISTORS
KS C 5201-1980 RELIABILITY ASSURED HIGH FREQUENCY LOW POWER TRANSISTORS
KS R IEC TS 61980-3:2020 Electric vehicle wireless power transfer(WPT) systems —Part 3: Specific requirements for the magnetic field wireless power transfer systems
KS A IEC 61123:2003 Reliability testing-Compliance test plans for success ratio
KS C IEC 62018:2006 Power consumption of information technology equipment－Measurement methods
KS C 5200-2002 RELIABILITY ASSURED LOW FREQUENCY LOW POWER TRANSISTORS
KS C 5201-2002 RELIABILITY ASSURED HIGH FREQUENCY LOW POWER TRANSISTORS
KS A IEC 61123-2003(2018)

Professional Standard - Electron, Deuterium lamp power

SJ 1709-1981 Measurement of input power of power klystrons
SJ 1710-1981 Measurement of output power of power klystrons
SJ 1719-1981 Measurement of oscillation frequency of power klystrons
SJ/Z 9096.1-1987 Method of measurement for radio transmitter Part 1: Measurement conditions, frequency, output power and power loss
SJ 1706-1981 Measurement of electron-beam transmission efficiency of power klystrons
SJ 1712-1981 Measurement of resettability of power klystrons
SJ 1711-1981 Measurement of operating frequency range of power klystrons
SJ 1721-1981 Measurement of frequency temperaturre coefficient of power klystrons
SJ/T 10316-1992 Application and attention for high power transmitting tubes
SJ 1708-1981 Measurement of bandwidth of power klystrons
SJ 1713-1981 Measurement of phaseshift of power klystrons
SJ 1720-1981 Measurement of spectrum of power klystrons
SJ 1707-1981 Measurement of gains of power klystrons
SJ/Z 9096.2-1987 Method of measurement for radio transmitter Part 2: bandwidth, out-of-band power, non-fundamental oscillation power
SJ 2534.16-1987 Test procedures for antennas--Measurement of power-capacity
SJ 1392-1978 Methods of measurement for excess noise power of noise-generator diodes
SJ 1716-1981 Measurement of pulse characteristics of power klystrons
SJ 367-1973 Measurement of output power of reflex klystrons
SJ 1875-1981 Methods of measurement for output power of gas laser devices
SJ 1717-1981 Measurement of pulse voltage of power klystrons
SJ 1714-1981 Measurement of intermodulation distortion ration of power klystrons
SJ 368-1973 Measurement of power ripple ratio of reflex klystrons

Society of Automotive Engineers (SAE), Deuterium lamp power

SAE ARP5297A-2011 Recommended Qualification Tests for Halogen Miniature Lamps Less than 35 Watts for Aircraft Applications
SAE ARP6971-2021 Power and Torque Determination for UAS Engines Having Maximum Power Ratings at or Below 22.4 kW
SAE J2247-2001 Truck Tractor Power Output for Trailer ABS
SAE J1372-1988 Sound Power Determination Earthmoving Machinery Static Condition
SAE ARINC720-1-1980 DIGITAL FREQUENCY/FUNCTION SELECTION FOR AIRBORNE ELECTRONIC EQUIPMENT

British Standards Institution (BSI), Deuterium lamp power

BS EN 62442-1:2011 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS EN 62442-1:2012 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS EN IEC 62442-1:2022 Tracked Changes. Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
BS EN IEC 62442-1:2018 Tracked Changes. Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
20/30427819 DC BS EN IEC 62442-1. Energy performance of lamp controlgear. Part 1. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
17/30332825 DC BS EN 62442-1 AMD11. Energy performance of lamp controlgear. Part 1. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
BS 6644:2005 Specification for Installation of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
BS 6644:2005+A1:2008 Specification for Installation of gas-fired hot water boilers of rated inputs between 70kW (net) and 1.8 MW (net) (2nd and 3rd family gases
21/30410195 DC BS IEC 63288. Wireless Power Transfer. Measuring method for wireless power transfer efficiency and standby power. mobile phone (TA 15)
BS EN 50285:1999 Energy efficiency of electric lamps for household use - Measurement methods
BS EN IEC 60051-3:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Special requirements for wattmeters and varmeters
BS 6644:2011 Specification for the installation and maintenance of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
BS EN IEC 61315:2019 Tracked Changes. Calibration of fibre-optic power meters
BS EN IEC 61290-4-3:2018 Optical amplifiers. Test methods - Power transient parameters. Single channel optical amplifiers in output power control
BS IEC 62792:2015 Measurement method for the output of electroshock weapons
BS 6583:1985 Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)
BS 2067:1953 Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method)
BS 4409-3:1982 Screw conveyors. Method for calculating drive power
16/30336198 DC BS EN 60051-3. Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3. Special requirements for wattmeters and varmeters
BS EN IEC 62442-2:2018 Energy performance of lamp controlgear. Controlgear for high intensity discharge lamps (excluding fluorescent lamps). Method of measurement to determine the efficiency of controlgear
BS PD IEC/TR 62627-08:2016 Fibre optic interconnecting devices and passive components. Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter
BS EN 62442-2:2014 Energy performance of lamp controlgear. Controlgear for high intensity discharge lamps (excluding fluorescent lamps) Method of measurement to determine the efficiency of the controlgear
BS EN 62018:2004 Power consumption of information technology equipment - Measurement methods
BS EN 61580-8:1997 Methods of measurement for waveguides. Waveguide power holding capability
BS EN 62018:2003 Power consumption of information technology equipment - Measurement methods
PD IEC/TR 62627-08:2016 Fibre optic interconnecting devices and passive components. Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter
BS EN 50294:2002 Measurement method of total input power of ballast-lamp circuits
BS EN 50294:1998 Measurement method of total input power of ballast-lamp circuits

AENOR, Deuterium lamp power

UNE 20833:1997 MEASUREMENT OF POWER-FRECUENCY ELECTRIC FIELDS.
UNE-EN 62442-1:2012/A11:2017 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
UNE-EN 62442-1:2012 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
UNE 68028:2003 Agricultural tractors. Engine power tests at the power take-off. Power correction factors.
UNE 34195:1984 SUGARS. DETERMINATION OF THE ROTATORY POWER (POLARISATION).
UNE-EN 61683:2001 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency.
UNE 21311:1971 FIRST CLASS MAXIMUM INDICATORS FOR ELECTRIC POWER METERS OF ALTERNATING CURRENT.
UNE 20932:1996 RELIABILITY TESTING. COMPLIANCE TESTS PLANS FOR SUCCESS RATIO.
UNE 18163:1985 INDUSTRIAL V-BELT DRIVES. CALCULATION OF POWER RATINGS.

Indonesia Standards, Deuterium lamp power

SNI 10-4836-1998 Character of signal light rhythm for marine navigation
SNI IEC 60051-3:2009 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters

NEMA - National Electrical Manufacturers Association, Deuterium lamp power

NEMA LE 5-1995 Procedure for Determining Luminaire Efficacy Ratings for Fluorescent Luminaires
NEMA LE 5-1993 Procedure for Determining Luminaire Efficacy Ratings for Fluorescent Luminaires
NEMA BL 2-2009 ENERGY EFFICIENCY FOR ELECTRONIC BALLASTS FOR T8 FLUORESCENT LAMPS
NEMA IOTP 1-2018 Standby Power of Connected Devices and the Internet of Things
NEMA C34.2-1968 PRACTICES AND REQUIREMENTS FOR SEMICONDUCTOR POWER RECTIFIERS

Association Francaise de Normalisation, Deuterium lamp power

NF C71-442-1:2013 Energy performance of lamp controlgear - Part 1: controlgear for fluorescent lamps - Method of measurement to dertermine the total input power of controlgear circuits and the efficiency of the controlgear
NF C71-442-1*NF EN IEC 62442-1:2018 Energy performance of lamp controlgear - Part 1 : controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
NF C71-442-1*NF EN IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1 : controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
NF EN IEC 62442-1:2022 Performance énergétique des appareillages de lampes - Partie 1 : appareillages des lampes à fluorescence - Méthode de mesurage pour la détermination de la puissance d'entrée totale des circuits d'appareillage et du rendement des appareillages
NF C93-803*NF EN 61315:2006 Calibration of fibre-optic power meters
NF C93-803:1997 Calibration of fibre optic power meters.
NF C97-905:1994 Ultrasonic power measurement in liquids in the frequency range 0,5 MHzto 25 MHz.
NF EN IEC 61315:2019 Étalonnage de wattmètres pour dispositifs à fibres optiques
NF C97-905/A1:2005 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz.
NF C72-400:2000 Energy efficiency of electric lamps for household use - Measurement methods.
NF EN IEC 61954:2021 Compensateurs statiques de puissance réactive (SVC) - Essais des valves à thyristors
NF R17-102*NF ISO 7653:1987 Road vehicles. Commercial vehicles. Couplings between power take-offs (pto) and ancillary driven units.
NF EN 61290-2-3:1998 Amplificateurs à fibres optiques - Spécification de base - Partie 2-3 : méthodes d'essai pour les paramètres de puissance optique. Mesureur de puissance optique.
NF C97-053*NF EN 50563:2013 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes
NF EN IEC 60051-3:2021 Appareils mesureurs électriques indicateurs analogiques à action directe et leurs accessoires - Partie 3 : exigences particulières pour les wattmètres et varmètres
NF EN 50645:2017 Exigences en matière d'écoconception applicables aux transformateurs de faible puissance
NF EN IEC 61290-4-3:2018 Amplificateurs optiques - Méthodes d'essai - Partie 4-3 : paramètres de puissance transitoire - Amplificateurs optiques monocanaux commandés par la puissance de sortie
NF EN IEC 63103:2020 Appareils d'éclairage - Mesure de puissance en mode non actif
NF G07-107:1985 Textiles - Détermination du pouvoir adiathermique et de l'indice d'isolation thermique
NF C93-805-4-3*NF EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3 : power transient parameters - Single channel optical amplifiers in output power control

International Electrotechnical Commission (IEC), Deuterium lamp power

IEC 62442-1:2011 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
IEC 62442-1:2018 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
IEC 62442-1:2022 RLV Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
IEC 62442-1:2018 RLV Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
IEC 61315:2019 Calibration of fibre-optic power meters
IEC 61315:2019 RLV Calibration of fibre-optic power meters
IEC TR 63231:2019 Consideration of energy efficiency in wireless power transfer technology
IEC 60244-2:1969 Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations
IEC 60051-3:1984 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3 : Special requirements for wattmeters and varmeters
IEC 60244-1:1968 Methods of measurement for radio transmitters. Part 1 : General conditions of measurement, frequency, output power and power consumption
IEC 60072-3:1994 Dimensions and output series for rotating electrical machines; part 3: small built-in motors; flange numbers BF10 to BF50
IEC 61290-2-3:1998 Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for power parameters - Optical power meter
IEC 60051-3:1984/AMD1:1994 Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters; Amendment 1
IEC TS 61980-3:2019 Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems
IEC 60244-2A:1969 Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices
IEC 60244-2B:1969 Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. Second supplement: Modulating signals for the measurement of bandwidth and out-of-band power of transmitters for telephony and so
IEC 60244-2:1969/AMD1:1974 Amendment 1 - Methods of measurement for radio transmitters. Part 2: Bandwidth, out-of-band power and power of non-essential oscillations
IEC 61803:1999 Determination of power losses in high-voltage direct current (HVDC) converter stations
IEC 61803:1999/COR1:1999 Determination of power losses in high-voltage direct current (HVDC) converter stations
IEC 62018:2003 Power consumption of information technology equipment - Measurement methods
IEC 62980:2022 Parasitic communication protocol for radio-frequency wireless power transmission
IEC 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
IEC 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC 61161:1992 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz

American National Standards Institute （ANSI), Deuterium lamp power

ANSI/ASTM F2544:2011 Test Method For Determining A-Weighted Sound Power Level Of Central Vacuum Power Units
ANSI/IEEE 1662:2008 Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships
ANSI/EIA 426-B:1998 Loudspeakers, Power Rating, Full Range
ANSI C12.10-2011 Physical Aspects of Watthour Meters - Safety Standard
ANSI/TIA-455-231-2015 FOTP-231 IEC-61315 Calibration of Fibre-Optic Power Meters
ANSI/TIA-455-231-2003 IEC 61315 - Calibration of Fibre-Optic Power Meters
ANSI/TIA-455-95A-2000 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/ASA S12.51-2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms
ANSI/UL 13a-2011 Standard for Safety for Power-Limited Circuit Cables
ANSI/ASA S12.23-1989 Method for the Designation of Sound Power Emitted by Machinery and Equipment
ANSI/UL 13-2005 Standard for Safety for Power-Limited Circuit Cables
ANSI S12.23-1989 Method for the Designation of Sound Power Emitted by Machinery and Equipment
ANSI/UL 13-2011 Standard for Safety for Power-Limited Circuit Cables

Japanese Industrial Standards Committee (JISC), Deuterium lamp power

JIS C 7215:1980 Reliability assured low frequency power transistors (medium and high power)
JIS C 6186:1999 Calibration of fiber optic power meters
JIS C 6186:2008 Calibration of fiber optic power meters
JIS C 6186:2020 Calibration of fiber optic power meters
JIS C 6180:1991 Measuring methods for laser output power
JIS C 8961:1993 Measuring procedure of power conditioner efficiency for photovoltaic systems
JIS C 8961:2008 Measuring procedure of power conditioner efficiency for photovoltaic systems
JIS D 5004:1976 Rated output of starting motors for automobiles
JIS D 1001:1993 Road vehicles -- Engine power test code
JIS D 5003:1976 Rated output and its test methods for automobile generators
JIS F 0401:1989 Terminology and definition of output of propulsion machinery installed in ships
JIS C 7212:1978 Reliability assured low frequency low power transistors
JIS C 7213:1978 Reliability assured high frequency low power transistors
JIS C 6122-4-3:2018 Optical amplifiers -- Test methods -- Part 4-3: Power transient parameters -- Single channel optical amplifiers in output power control

European Committee for Electrotechnical Standardization（CENELEC）, Deuterium lamp power

EN 62442-1:2011 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
EN IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
EN IEC 61315:2019 Calibration of fibre-optic power meters
EN 50285:1999 Energy Efficiency of Electric Lamps for Household Use - Measurement Methods
EN 60051-3:1989 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 3: Special Requirements for Wattmeters and Varmeters (Incorporates Amendment A1: 1995)
HD 236.1-1975 Methods of Measurement for Radio Transmitters Part 1: General Conditions of Measurement, Frequency, Output Power and Power Consumption
EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control

Danish Standards Foundation, Deuterium lamp power

DS/EN 62442-1:2012 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
DS/EN 62442-1/AC:2012 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
DS/EN 61315:2006 Calibration of fibre-optic power meters
DS/EN 61683:2001 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
DS/ISO 3744:1982 Acoustics. Determination of sound power levels of noise sources. Engineering methods for free-field conditions over a reflecting plane
DS/ISO 8759/1:1986 Agricultural wheeled tractors. Front-mounted linkage and power take-off. Part 1: Power take-off
DS/EN 61803:2000 Determination of power losses in high-voltage direct current (HVDC) convertor stations

Lithuanian Standards Office , Deuterium lamp power

LST EN 62442-1-2012/AC-2012 Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
LST EN 62442-1-2012 Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear (IEC 62442-1:2011)
LST EN 61315-2006 Calibration of fibre-optic power meters (IEC 61315:2005)
LST EN 61683-2002 Photovoltaic systems. Power conditioners. Procedure for measuring efficiency (IEC 61683:1999)

CENELEC - European Committee for Electrotechnical Standardization, Deuterium lamp power

EN IEC 62442-1:2018 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
EN 61290-2-3:1998 Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters Optical Power Meter
EN 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control

ES-UNE, Deuterium lamp power

UNE-EN IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear (Endorsed by Asociación Española de Normalización...
UNE-EN IEC 62442-1:2019 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
UNE-EN IEC 61315:2019 Calibration of fibre-optic power meters (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN IEC 60051-3:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN 61803:1999 Determination of power losses in high-voltage direct current (HVDC) converter stations (Endorsed by AENOR in May of 2001.)
UNE-EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (Endorsed by Asociación Española de Normalización in August of 2018.)

U.S. Military Regulations and Norms, Deuterium lamp power

ARMY MIL-C-13940 (1)-1955 CABLE ASSEMBLIES, POWER, ELECTRICAL, AND EXTENSION LIGHTS, CONNECTORS, ADAPTERS, AND DUMMIES
ARMY MIL-C-13940 SUPP 1-1955 CABLE ASSEMBLIES, POWER, ELECTRICAL, AND EXTENSION LIGHTS, CONNECTORS, ADAPTERS, AND DUMMIES
ARMY MIL-C-13940-1955 CABLE ASSEMBLIES, POWER, ELECTRICAL, AND EXTENSION LIGHTS, CONNECTORS, ADAPTERS, AND DUMMIES

ES-AENOR, Deuterium lamp power

ZA-SANS, Deuterium lamp power

SANS 61315:2006 Calibration of fibre-optic power meters

KR-KS, Deuterium lamp power

KS C IEC 61315-2020 Calibration of fiber-optic power meters
KS R IEC TS 61980-3-2020 Electric vehicle wireless power transfer(WPT) systems —Part 3: Specific requirements for the magnetic field wireless power transfer systems
KS A IEC 61123-2003(2023)

German Institute for Standardization, Deuterium lamp power

DIN EN IEC 61315:2020-07 Calibration of fibre-optic power meters (IEC 61315:2019); German version EN IEC 61315:2019 / Note: DIN EN 61315 (2006-09) remains valid alongside this standard until 2022-05-03.
DIN EN 135001:1993 Blank detail specification: C.W. power amplifier travelling wave tubes up to 500 Watts; German version EN 135001:1992
DIN EN 61683:2000-08 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency (IEC 61683:1999); German version EN 61683:2000
DIN EN 50285:1999 Energy efficiency of electric lamps for household use - Measurement methods; German version EN 50285:1999
DIN EN IEC 61803:2021-06 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (IEC 61803:2020); German version EN IEC 61803:2020 / Note: DIN EN 61803 (2017-04) remains valid alongside this standard until 2023-11...
DIN 15560-104:2003 Projectors for film and television studios, stage and photographic use - Part 104: Daylight projector systems up to 4000 W rated power and special connectors
DIN EN 62442-1:2012 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear (IEC 62442-1:2011); German version EN 62442-1:2011
DIN EN IEC 62442-1:2021 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear (IEC 62442-1:2018); German version EN IEC 62442-1:2
DIN 41756-3:1975 Static power convertors; duty of power convertors, types of a.c. load
DIN IEC 60244-2:1982-11 Methods of measurement for radio transmitters; part 2: bandwidth, out-of-band power and power of non-essential oscillations
DIN EN 60051-3:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 3: special requirements for wattmeters and varmeters (IEC 60051-3:1984, edition 4); german version EN 60051-3:1989
DIN 48600:1979 Industrial electro-heat equipment; power measurement on high-frequency appliances for induction heating equipment, measuring method for determination of power output of high-frequency generators
DIN EN IEC 61290-4-3:2019-12 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (IEC 61290-4-3:2018); German version EN IEC 61290-4-3:2018 / Note: DIN EN 61290-4-3 (2016-06) remains valid alongside t...

International Telecommunication Union (ITU), Deuterium lamp power

ITU-T Q.20-1989 Maximum Permissible Value for the Absolute Power Level of a Signalling Pulse - General Recommendations on Telephone Switching and Signalling - Functions and Information Flows for Services in the ISDN - Supplements (Study Group XI) 2 pp
ITU-T G.224-1988 Maximum permissible value for the absolute power level (power referred to one milliwatt) of a signalling pulse
ITU-T G.224-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE
ITU-T G.224 FRENCH-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE
ITU-T G.224 SPANISH-1993 MAXIMUM PERMISSIBLE VALUE FOR THE ABSOLUTE POWER LEVEL (POWER REFERRED TO ONE MILLIWATT) OF A SIGNALLING PULSE
ITU-R QUESTION 210-2/1-2007 Power transmission via radio frequency beam
ITU-R BS.215-2 SPANISH-1982 Maximum transmitter powers for broadcasting in the Tropical Zone
ITU-R BS.215-2 FRENCH-1982 Maximum transmitter powers for broadcasting in the Tropical Zone
ITU-R SM.326-7-1998 Determination and Measurement of the Power of Amplitude-Modulated Radio Transmitters
ITU-T V.2 FRENCH-1988 POWER LEVELS FOR DATA TRANSMISSION OVER TELEPHONE LINES
ITU-T V.2 SPANISH-1988 POWER LEVELS FOR DATA TRANSMISSION OVER TELEPHONE LINES
ITU-R BS.215-1982 Maximum transmitter powers for broadcasting in the Tropical Zone
ITU-R REPORT RA.2188-2010 Power flux-density and e.i.r.p. levels potentially damaging to radio astronomy receivers
ITU-T G.224-1989 Maximum Permissible Value for the Absolute Power Level (Power Referred to One Milliwatt) of a Signalling Pulse - International Analogue Carrier Systems (Study Group XV) 1 pp
ITU-R INFORME M.760-3 SPANISH-2004 Link power budgets for a maritime mobile-satellite service
ITU-R REPORT M.760-3-2004 Link power budgets for a maritime mobile-satellite service
ITU-R S.1718-2005 Power flux-density values in the band 11.7-12.7 GHz and associated calculation methodology which may be used when the power flux-density values in § 6 of Annex 1 to Appendix 30 of the Radio Regulations are exceeded Question ITU-R 236/4

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Deuterium lamp power

ASHRAE 3644-1993 Measurements of Electrical Power Inputs to Variable-Speed Motors and Their Solid-State Power Converters
ASHRAE PH-97-1-3-1997 Cooling Power/Efficiency Diagrams for a Compressor-Driven Metal Hydride Heat Pump
ASHRAE LO-09-070-2009 Functional Exergy Efficiency at Near-Environmental Temperatures

国家市场监督管理总局、中国国家标准化管理委员会, Deuterium lamp power

GB/T 32483.2-2021 Energy performance of lamp controlgear—Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps)—Method of measurement to determine the efficiency of controlgear
GB/T 39018-2020 Intelligent lighting equipment—Non-active mode power measurement
GB/T 12350-2022 Safety requirements of small power motors

CZ-CSN, Deuterium lamp power

CSN 36 1051-1954
CSN 35 0039-1973 Bating plates for fraction power electric motors
CSN 35 1310-1984 Small power transformers for common application
CSN 35 8206-1978 Capacitors for power factor correction
CSN 35 8206-1985 Capacitors for power factor correction
CSN 35 1310-1973 Small power transfromers for generál use
CSN 35 8211-1986 Self-healing capacitors for power factor correction. General technical requirements and methods of tests
CSN 36 7117-1-1999 Methods of measurement for rádio transmitters Part 1: General conditions of measurement, frequency, output power and power consumption
CSN 36 5601-2-1997 Traffic light signals. Technical and functional requirements. Part 2: Traffic light signals for accentuation of danger points.
CSN 36 5601-1-1997 Traffic light signals. Technical and functional requirements. Part 1: Traffic light signals for traffic control

VE-FONDONORMA, Deuterium lamp power

Underwriters Laboratories (UL), Deuterium lamp power

UL 13-2007 UL Standard for Safety Power-Limited Circuit Cables Third Edition
UL 13-1990 Power-limited circuit cables
UL 13-1996 Power-limited circuit cables
UL 977 BULLETINS-2005 Fused Power-Circuit Devices
UL 508C BULLETIN-2008 UL Standard for Safety Power Conversion Equipment
UL 1424-2005 UL Standard for Safety Cables for Power-Limited Fire-Alarm Circuits Third Edition
UL 13 BULLETIN-2003 UL Standard for Safety Power-Limited Circuit Cables
UL 13 BULLETIN-2005 UL Standard for Safety Power-Limited Circuit Cables
UL 13 BULLETIN-2018 UL Standard for Safety Power-Limited Circuit Cables
UL 13 BULLETIN-2004 UL Standard for Safety Power-Limited Circuit Cables
UL 458 BULLETIN-2006 UL Standard for Safety Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts
UL 1424-1990 Cables for power-limited fire-protective-signaling circuits
UL 1424-1996 Cables for power-limited fire-alarm circuits
UL 458-2015 UL Standard for Safety Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts (Sixth Edition)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Deuterium lamp power

ASHRAE 41.11-2014 Standard Methods for Power Measurement

TR-TSE, Deuterium lamp power

TS 2201-1976 METHODS OF MEASUREMENTS FOR RADIO TRANSMITTERS BANDWIDTH, OUT—OF—BAND POWER AND POWER OF NON— ESSENTIAL OSCILLATIONS
TS 2709-1977 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES — PRECISION METHODS FOR DISCRETE — FREQUENCY AND NARROW - BAND SOURCES IN REVERBERATION ROOMS
TS 854-1970 EXPRESSION OF THE POVVEft AND INTENSITY LEVELS OF SOUND OR NOISE
TS 2048-1975 MEASUREMENT OF THE ELECTRICAL PROPERTIES OF MICROWAVE TUBES HIGH — POWER KLYSTRONS

European Standard for Electrical and Electronic Components, Deuterium lamp power

EN 135001:1992 Blank detail specification: C.W. power amplifier travelling wave tubes up to 500 Watts

AT-OVE/ON, Deuterium lamp power

OVE EN IEC 62442-1:2021 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear (IEC 34C/1529/CDV) (english version)

IN-BIS, Deuterium lamp power

IS 10853 Pt.3-1984

Professional Standard - Forestry, Deuterium lamp power

LY/T 1276-1998 Brush-cutters.Determination of sound power levels.

GM North America, Deuterium lamp power

GM GM9175P-2003 Power Factor of Dielectric Foundation Board
GM GM9176P-1993 Procedure for Determining the Relative Power Factor of Dielectric Sealing Tape

American Society of Mechanical Engineers (ASME), Deuterium lamp power

ASME Y32.10-1967(R1999) Graphic Symbols for Fluid Power Diagrams

ESDU - Engineering Sciences Data Unit, Deuterium lamp power

ESDU 00002-2011 Sound power radiation from isotropic plates
ESDU 00002-2000 Sound power radiation from isotropic plates.
ESDU 70023 A-1982 The measurement and analysis of climb and excess power performance.
ESDU 17011-2018 Power Spectral Density and Bandwidth Correction of Spectrum Level

Standard Association of Australia （SAA）, Deuterium lamp power

AS/NZS IEC 62301:2014
AS/NZS 4714:2000 Ultrasound power measurement in liquids in the frquency range 0.5 MHz to 25 MHz
AS/NZS 4012:1999 Domestic solid fuel burning appliance - Method for determination of power output and efficiency
AS/NZS 4012:2014

National Electrical Manufacturers Association（NEMA), Deuterium lamp power

NEMA BL 2-2007 ENERGY EFFICIENCY FOR ELECTRONIC BALLASTS FOR T8 FLUORESCENT LAMPS
NEMA C12.10-2011 Physical Aspects of Watthour Meters - Safety Standard
NEMA SSL 3-2010 HIGH-POWER WHITE LED BINNING FOR GENERAL ILLUMINATION

Defense Logistics Agency, Deuterium lamp power

DLA MIL-PRF-15160 J (1)-2007 FUSES: INSTRUMENT, POWER, AND TELEPHONE, GENERAL SPECIFICATION FOR
DLA QPL-21038-59 NOTICE 1-2008 Transformers, Pulse, Low Power, General Specification for
DLA DSCC-DWG-90024 REV C-2006 SEMICONDUCTOR DEVICE, POWER SWITCHING REGULATOR ASSEMBLY
DLA DSCC-DWG-90025 REV B-2002 SEMICONDUCTOR DEVICE, POWER SWITCHING REGULATOR ASSEMBLY
DLA A-A-59741-2002 INDUCTOR, POWER, SHIELDED, ULTRAMINIATURE, SURFACE MOUNT
DLA MIL-PRF-22 E SUPP 1-2007 RESISTORS, VARIABLE, (WIREWOUND, POWER TYPE), GENERAL SPECIFICATION FOR
DLA MIL-PRF-22 E-2007 RESISTORS, VARIABLE, (WIREWOUND, POWER TYPE), GENERAL SPECIFICATION FOR
DLA MIL-PRF-26 H-2006 RESISTORS, FIXED, WIRE WOUND (POWER TYPE) GENERAL SPECIFICATION FOR

YU-JUS, Deuterium lamp power

JUS N.G0.060-1990 Dimensions of small power motors for definite purpose application

AT-ON, Deuterium lamp power

ONORM S 5071-1990 Special requirements for the determination ofsound power oflathes
ONORM S 5074-1990 Special requirements for the determination of sound power ofmilling machines
ONORM S 5075-1990 Special requirements for the determination of sound power ofdrilling machines
ONORM S 5050-1989 Special regulations for the determination of sound power of chimneys
ONORM S 5085-1991 Special requirements for the determination of sound power ofliquid pumps
ONORM S 5087-1991 Special requirements for the determination of sound power ofcomminuting machines
ONORM S 5051-1989 Special regulations for the determination of sound power of cooling towers
ONORM S 5076-1990 Special requirements for the determination of sound power ofgear hobbing machines
ONORM S 5052-1989 Special regulations for the determination of sound power of flares
ONORM S 5078-1990 Special requirements for the determination of sound power ofgrinding machines
ONORM S 5083-1991 Special requirements for the determination ofsoundpower of combustion engines
ONORM S 5072-1990 Special requirements for the determination of sound power of for ging hammers
ONORM S 5037-1991 Determination ofsoundpower ofnoise sources - Method using a reference sound source
ONORM S 5084-1991 Special requirements for the determination of soundpower ofgear transmissions
ONORM S 5060-1983 Determination of sound power of Ventilation equipment; in-duct method
ONORM S 5077-1990 Special requirements for the determination of sound power ofcircular sawing machines
ONORM S 5073-1990 Special requirements for the determination of soundpower ofuniversal presses
ONORM S 5040-1996 Determination of sound power of sound sources - Measurement of structure borne noise

IT-UNI, Deuterium lamp power

UNI 5790-1966

(U.S.) Telecommunications Industries Association , Deuterium lamp power

TIA-455-231-2003 FOTP-231 IEC-61315 Calibration of Fibre-Optic Power Meters
TIA-455-231-2015 FOTP-231 IEC-61315 Calibration of Fibre-Optic Power Meters
TIA TSB-184-2009 Guidelines for Supporting Power Delivery Over Balanced Twisted-Pair Cabling
TIA/EIA-455-211-2000 FOTP-211 IEC 61290-2-3 Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter

CO-ICONTEC, Deuterium lamp power

Consumer Electronics Association （U.S.), Deuterium lamp power

CEA-2013-A-2007 Digital STB Background Power Consumption

U.S. Air Force, Deuterium lamp power

AIR FORCE A-A-59101 B VALID NOTICE 1-2012 Wattmeter Meter, Audio Power 20 HZ to 20 KHZ
AIR FORCE A-A-59101 B-2004 WATTMETER METER, AUDIO POWER 20 HZ TO 20 KHZ

Institute of Electrical and Electronics Engineers (IEEE), Deuterium lamp power

IEEE Std 390-1975 IEEE Standard for Low Power Pulse Transformers
IEEE No 264-1968 IEEE Standard for High-Power Wide-Band Transformers.
ANSI/IEEE Std 519-1981 IEEE Guide for Harmonic Control and Reactive Compensation of Static Power Convertors
IEEE P1860/D9, February 2014 IEEE Guide for Voltage Regulation and Reactive Power Compensation at 1000 kV AC and Above
IEEE Std 1860-2014 IEEE Guide for Voltage Regulation and Reactive Power Compensation at 1000 kV AC and Above
IEEE Std 470-1972 IEEE Standard Application Guide for Bolometric Power Meters
IEEE P1860/D8, July 2013 IEEE Draft Guide for Voltage Regulation and Reactive Power Compensation at 1000 kV AC and Above

American Nuclear Society (ANS), Deuterium lamp power

ANS 5.1-1994 Decay Heat Power in Light Water Reactors
ANS 5.1-2014 Decay Heat Power in Light Water Reactors

ANS - American Nuclear Society, Deuterium lamp power

5.1 ERTA-2005 Decay Heat Power in Light Water Reactors
5.1-1994 Decay Heat Power in Light Water Reactors

IEC - International Electrotechnical Commission, Deuterium lamp power

IEC 60411-1:1975 Power Convertors for Electric Traction Part 1: Single-Phase Power Convertors Using Thyristors (Edition 1.0)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Deuterium lamp power

GB/T 7676.3-2017 Direct acting indicating analogue electrical measuring instruments and their accessories—Part 3：Special requirements for wattmeters and varmeters

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Deuterium lamp power

IEEE 519-1981 GUIDE FOR HARMONIC CONTROL AND REACTIVE COMPENSATION OF STATIC POWER CONVERTERS

Military Standard of the People's Republic of China-General Armament Department, Deuterium lamp power

GJB 2888A-2011 General specification for relays,electromagnetic,heavy-duty established reliability

International Organization for Standardization (ISO), Deuterium lamp power

ISO/IEC 24091:2019 Information technology — Power efficiency measurement specification for data center storage
ISO 3744:1981 Acoustics; Determination of sound power levels of noise sources; Engineering methods for free-field conditions over a reflecting plane
ISO 5292:1980 Industrial V-belt drives — Calculation of power ratings
ISO 8759-1:1985 Agricultural wheeled tractors; Front-mounted linkage and power take-off; Part 1 : Power take-off
ISO 9249:1989 Earth-moving machinery; engine test code; net power

BELST, Deuterium lamp power

STB 2460-2020 Fluorescent lamps without integrated ballast, high intensity discharge lamps, ballasts and lamps for such lamps. Energy efficiency. Requirements and control method

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Deuterium lamp power

JEDEC JESD24-3-1990 Thermal Impedance Measurements for Vertical Power MOSFETs (Delta Source-Drain Voltage Method) Addendum to JEDEC JESD 24
JEDEC JESD237-2014 Reliability Qualification of Power Amplifier Modules

European Committee for Standardization (CEN), Deuterium lamp power

HD 236.2 S1-1977 Methods of measurement for radio transmitters; part 2: bandwidth, out-of-band power and power of non-essential oscillations
HD 398.5 S1-1983 Power transformers; part 5: ability to withstand short-circuit
HD 398.5 S1 A1-1988 Power transformers; part 5: ability to withstand short-circuit

PL-PKN, Deuterium lamp power

PN E06501-03-1992 Direct acting indicating analogue electrical measuring instruments and their accessories Special re?uirements for wattmeters and yarmeters
PN E06044-1973 Smali power transformers for general applications General specifications
PN T04871-1973 Microwave tubes Low power travelling wave tubes Methods of electrical tests

Professional Standard - Electricity, Deuterium lamp power

SE-SIS, Deuterium lamp power

SIS SS CECC 25300-1981 Sectional specification: Magnetic oxide cores for power applications

Electronic Components, Assemblies and Materials Association, Deuterium lamp power

ECA 197-A-1973 Power Filter Inductors for Electronic Equipment

American Gear Manufacturers Association, Deuterium lamp power

AGMA 94FTM2-1994 Analytical Method for the Calculation of the Efficiency of Planetary Gears

IPC - Association Connecting Electronics Industries, Deuterium lamp power

IPC TM-650 2.5.34-2012 Power Density Rating for Embedded Resistors

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Deuterium lamp power

AHRI 1280-2014 Sound Power Rating of Water-cooled Chillers
AHRI 230-2013 Sound Intensity Testing Procedures for Determining Sound Power of HVAC Equipment

ECIA - Electronic Components Industry Association, Deuterium lamp power

TEP 181-1980 Measurement of X-Radiation from Power Tubes@ Recommended Practice for

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Deuterium lamp power

CEPT T/R 20-05-1984 Systemes Radioelectriques De Faible Puissance Pour L'Appel De Personnes
CEPT T/R 01-04 E-1992 Use of Low Power Devices (LPD) Using Integral Antennas and Operating in Harmonized Frequency

American Society for Testing and Materials (ASTM), Deuterium lamp power

ASTM D4313-12 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
ASTM D4314-12 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable
ASTM B77-07(2013) Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
ASTM B77-81(1994)e1 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
ASTM B77-81(2001) Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
ASTM B77-07(2018) Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys

Canadian Standards Association (CSA), Deuterium lamp power

CAN/CSA-C393-2012 Test methods for measuring power consumption in low and idle power modes of commercial and industrial equipment (First Edition: Update No. 1: July 2014)

FI-SFS, Deuterium lamp power

Professional Standard - Nuclear Industry, Deuterium lamp power

EJ/T 745-2001 Calculation of decay heat power in the nuclear fuel of light water reactors
EJ/T 745-1992 Calculation of Decay Heat Power of Light Water Reactor Nuclear Fuel

Professional Standard - Medicine, Deuterium lamp power

YY/T 91084-1999 Methods of measuring the sound power of ultrasonic diagnostic equipment for medical use

Professional Standard - Energy, Deuterium lamp power

NB/T 20056-2011 Calculation of decay heat power in the nuclear fuel of light water reactors
NB/T 20056-2021 Calculation of Decay Heat Power of Light Water Reactor Nuclear Fuel

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Deuterium lamp power

ITU-T H.51-1984 Power levels for data transmission over telephone lines

GM Europe, Deuterium lamp power

GME 16644-2011 Torque Accuracy Check on Dynamic Power Analyzer

Conference of European Post Telecommunication (CEPT), Deuterium lamp power

CEPT T/R 20-03 E-1988 Low-Power Telecommand and Telemetry Equipment Operating on Collective Frequencies in ISM Bands

Insulated Cable Engineers Association （ICEA), Deuterium lamp power

ICEA T-25-425-2015 GUIDE FOR ESTABLISHING STABILITY OF VOLUME RESISTIVITY FOR SEMICONDUCTING POLYMERIC COMPONENTS OF POWER CALBES

ICEA - Insulated Cable Engineers Association Inc., Deuterium lamp power

T-25-425-2015-2015 GUIDE FOR ESTABLISHING STABILITY OF VOLUME RESISTIVITY FOR SEMICONDUCTING POLYMERIC COMPONENTS OF POWER CALBES

Professional Standard - Machinery, Deuterium lamp power

JB/T 5973-1992 Determination of sound power level for noise emitted by drying machine - Simple method

BR-ABNT, Deuterium lamp power

ABNT NBR ISO 6393:2011 Machinery - Determination of sound power level - static test conditions

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Deuterium lamp power

REPORT M.760-3-2004 Link power budgets for a maritime mobile-satellite service

GOSTR, Deuterium lamp power

GOST 27871-1988 Reducers of general usage. Methods for the determination of the sound power level

Illuminating Engineering Society of North America, Deuterium lamp power

IESNA LM-85-2014 Approved Method for Electrical and Photometric Measurements of High-Power LEDs