ZH
RU
ES

Ammonia isothermal

Ammonia isothermal, Total:88 items.

In the international standard classification, Ammonia isothermal involves: Geology. Meteorology. Hydrology, Protection of and in buildings, Construction materials, Burners. Boilers, Inorganic chemicals, Adhesives, Coals, Non-metalliferous minerals, Energy and heat transfer engineering in general, HEALTH CARE TECHNOLOGY, Thermodynamics and temperature measurements, Installations in buildings, Pipeline components and pipelines, Valves, Products of the chemical industry, Leather technology.

National Metrological Verification Regulations of the People's Republic of China, Ammonia isothermal

JJG 128-2003 Standard Mercury-in-Glass Thermometers (Grade Ⅱ)
JJG 161-1994 Verification Regulation of Standard Mercury-in-Glass Thermometer(Grade I)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Ammonia isothermal

GB/T 34967-2017 Grade of rice cold damage in northern China

Xinjiang Provincial Standard of the People's Republic of China, Ammonia isothermal

DB65/T 4324-2020 Level of warming process of snowmelt flood

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ammonia isothermal

GB 50404-2017 Technical code for rigid polyurethane foam insulation and waterproof engineering
GB 50404-2007 Technical code for rigid polyurethane foam insulation and waterproof engineering
GB/T 42333-2023 Determination of Iodine Content in Soil and Water System Sediments Ammonia Closed Dissolution-Inductively Coupled Plasma Mass Spectrometry

(U.S.) Ford Automotive Standards, Ammonia isothermal

FORD M1C157-A-1991 GREASE - HIGH TEMPERATURE WATER RESISTANT - NO.2 GRADE
FORD WSK-M6J160-A1-1991 PRIMER SURFACER, COLOURED, PU-MODIFIED POLYESTER, MEDIUM SOLID, 165 C BAKING TEMPERATURE
FORD ESB-M2D263-A3-2009 POLYURETHANE, MICROCELLULAR ELASTOMER - LIQUID REACTION MOLDED (LRM) - INTERMEDIATE MODULUS - IMPROVED TEMPERATURE PERFORMANCE - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Building Materials, Ammonia isothermal

JCJ 14-1999 Code for waterproofing and heat insulation engineering of polyurethane rigid foam

Group Standards of the People's Republic of China, Ammonia isothermal

T/CCAS 017-2021 Test method for heat of hydration of cement （Isothermal conduction calorimetry）
T/SARI 0005-2019 The minimum allowable values of the energy efficiency and energy efficiency grades for water-source high-temperature heat pump unit

British Standards Institution (BSI), Ammonia isothermal

BS EN 196-11:2018 Methods of testing cement - Heat of hydration. Isothermal Conduction Calorimetry method
BS PD CEN/TR 16632:2014 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations
22/30437075 DC BS ISO 17499. Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
BS ISO 17499:2023 Tracked Changes. Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
BS EN 489:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 15698-2:2015 District heating pipes. Preinsulated bonded twin pipe systems for directly buried hot water networks. Fitting and valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

American National Standards Institute （ANSI), Ammonia isothermal

ANSI/AHRI 470-2006 Performance Rating of Desuperheater/Water Heaters

Korean Agency for Technology and Standards (KATS), Ammonia isothermal

KS M ISO 7109:2002 Ammonia solution for industrial use－Determination of residue after evaporation at 105 ℃－Gravimetric method
KS M ISO 7109:2017 Ammonia solution for industrial use — Determination of residue after evaporation at 105℃ — Gravimetric method

PL-PKN, Ammonia isothermal

PN P22126-1991 Leathers. Determination of water vapour permeability in non-isothermal conditions
PN-EN 196-11-2019-01 P Methods of testing cement -- Part 11: Heat of hydration -- Isothermal Conduction Calorimetry method

CEN - European Committee for Standardization, Ammonia isothermal

EN 196-11:2018 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
PREN 196-11-2017 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
EN 448:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes@ polyurethane thermal insulation and outer casing of polyethylene

German Institute for Standardization, Ammonia isothermal

DIN EN 196-11:2019 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
DIN EN 196-11:2019-03 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method; German version EN 196-11:2018
DIN CEN/TR 16632:2014-10*DIN SPEC 18087:2014-10 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations; German version CEN/TR 16632:2014
DIN EN 4627:2014-09 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations; German version CEN/TR 16632:2014
DIN EN 253/A2:2007 District Heating Pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:2003/A2:2006
DIN EN 448:2016 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 448:2015

ES-UNE, Ammonia isothermal

UNE-EN 196-11:2019 Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method

Association Francaise de Normalisation, Ammonia isothermal

NF EN 196-11:2018 Méthodes d'essais des ciments - Partie 11 : chaleur d'hydratation - Méthode par calorimétrie à conduction isotherme
NF P15-471-11*NF EN 196-11:2018 Methods of testing cement - Part 11 : heat of hydration - Isothermal Conduction Calorimetry method
NF T76-113:1983 Water adhesives. Aminoplastic. Determination of conventional gel time at different temperatures.
NF T76-113:2021 Water-based adhesives - Aminoplastics - Conventional determination of gel setting time at different temperatures
NF E39-012:2009 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.

CZ-CSN, Ammonia isothermal

CSN 77 0940-1983 Determination of moisture sorption isoterms for projection of protective packaging

Professional Standard - Coal, Ammonia isothermal

MT/T 1157-2011 Determination of Equilibrium Miosture in coal Isotherm Adsorption Method

Shanghai Provincial Standard of the People's Republic of China, Ammonia isothermal

DB31/ 641-2012 Energy efficiency limit value and energy efficiency grade of water source high temperature heat pump unit

American Society for Testing and Materials (ASTM), Ammonia isothermal

ASTM C1679-08 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM C1679-09 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM C1702-15a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1679-22 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM C1847-21 Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems
ASTM C1679-17 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM C1702-13a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-23 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1679-07 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM C1702-09a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-17 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-13 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-14 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D3860-98 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2020) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2003) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2008) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM D3860-98(2014) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
ASTM C1702-09 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-15 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702-15b Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1679-13 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM C1679-14 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM C1897-20 Standard Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements

European Committee for Standardization (CEN), Ammonia isothermal

PD CEN/TR 16632:2014 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations
CEN/TR 16632:2014 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations
EN 253:2009+A2:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
EN 448:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN 488:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN 448:1994 Preinsulated Bonded Pipe Systems for Underground Hot Water Networks-Fitting Assemblies of Steel Service Pipes, Polyurethane Thermal Insulation and Outer Casing of Polyethylene
EN 15698-2:2015 District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 2: Fitting and valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN ISO 5398-2:2009 Leather - Chemical determination of chromic oxide content - Part 2: Quantification by colorimetric determination (ISO 5398-2:2009)

国家市场监督管理总局、中国国家标准化管理委员会, Ammonia isothermal

GB 37480-2019 Minimum allowable values of energy efficiency and energy efficiency grades for low ambient temperature air source heat pumps（water chiller） packages

KR-KS, Ammonia isothermal

KS M ISO 17499-2016 Carbonaceous materials used in the production of aluminium－Determination of baking level expressed by equivalent temperature

BE-NBN, Ammonia isothermal

NBN-EN 253-1993 Preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of high density polyethylene
NBN A 35-103-1972
NBN-EN 254-1993 Preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of ductile iron pipes, polyurethane thermal insulation and outer casing of high density polyethylene

Professional Standard - Commodity Inspection, Ammonia isothermal

SN/T 3767.21-2014 Loop-mediated isothermal amplification detection method for genetically modified components in food for export.Part 21:Rice KF6
SN/T 3767.24-2014 Loop-mediated isothermal amplification detection method for genetically modified components in food for export.Part 24:Rice LLRICE62
SN/T 3767.25-2014 Loop-mediated isothermal amplification detection method for genetically modified components in food for export.Part 25:Rice M12
SN/T 3767.22-2014 Loop-mediated isothermal amplification detection method for genetically modified components in food for export.Part 22:Rice KF8
SN/T 3767.23-2014 Loop-mediated isothermal amplification detection method for genetically modified components in food for export.Part 23:Rice KMD
SN/T 3767.26-2014 Loop-mediated isothermal amplification detection method for genetically modified components in food for export.Part 26:Rice T1C-19
SN/T 3767.20-2014 Loop-mediated isothermal amplification detection method for genetically modified components in food for export.Part 20:Rice Bt-63
SN/T 3767.27-2014 Loop-mediated isothermal amplification detection method for genetically modified components in food for export.Part 27:Rice T2A-1

未注明发布机构, Ammonia isothermal

DIN EN 253:2003 District heating pipes — Preinsulated bonded pipe systems for directly buried hot water networks — Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene