ZH
RU
ES

Test low frequency impedance

Test low frequency impedance, Total:373 items.

In the international standard classification, Test low frequency impedance involves: Electrical and electronic testing, Welding, brazing and soldering, Products of the chemical industry, Audio, video and audiovisual engineering, Vocabularies, Transformers. Reactors, Paints and varnishes, Linear and angular measurements, Hand-held tools, Components and accessories for telecommunications equipment, Semiconductor devices, Electromechanical components for electronic and telecommunications equipment, Road vehicle systems, Telecommunication systems, Measurement of volume, mass, density, viscosity, Materials and components for railway engineering, Lamps and related equipment, Electric filters, Automatic controls for household use, Shipbuilding and marine structures in general, Electromagnetic compatibility (EMC), Construction materials, Protection of and in buildings, Insulating materials, Surface treatment and coating, Electricity. Magnetism. Electrical and magnetic measurements, Rectifiers. Convertors. Stabilized power supply, Electronic tubes, Power stations in general, Acoustics and acoustic measurements, Road vehicles in general, Protection against fire, Conducting materials, Aerosol containers, Electrical accessories, Reinforced plastics, Equipment for the chemical industry, Gas and steam turbines. Steam engines, Insulation, Power transmission and distribution networks, Materials for aerospace construction, Piezoelectric and dielectric devices, Products of the textile industry, Components for electrical equipment, Paint coating equipment, Earthworks. Excavations. Foundation construction. Underground works, Testing of metals, Non-destructive testing, Freight distribution of goods, Adhesives, Construction of railways, Footwear, Aerospace electric equipment and systems, Tyres.

National Metrological Verification Regulations of the People's Republic of China, Test low frequency impedance

JJG(电子) 05007-1987 HP4192A Low Frequency Impedance Analyzer Trial Verification Regulations
JJG 1180-2021 Power Frequency GroundImpedance Testers for Large Grounding Grid
JJG 127-1986 Verification Regulation of Model HP 4191 A RF Impedance Analyzer
JJG(船舶) 04-1991 Verification regulations for ultra-low frequency hysteresis loop tester
JJG 725-1991 Verification Regulation of DC and LF Characterization Tester for Transister
JJG(电子) 04005-1987 JSS-4A Transistor Low Frequency H Parameter Tester Trial Verification Regulations

Group Standards of the People's Republic of China, Test low frequency impedance

T/GVS 007-2022 Test method for dynamic impedance of RF generator
T/CPSS 1005-2021 Technical specification of impedance sweeping equipment of low voltage DC distribution and utilization system
T/CEC 354-2020 General technical requirements for transformer low-voltage short-circuit impedance tester
T/XAI 10-2021 Test equipment for impedance value of package substrate
T/CSA 047-2019 Measurement Method for Real Thermal Resistance and Impedance of Light Emitting Diodes
T/CEC 201-2019 Guidelines for detecting and judging power transformer winding deformation by sweeping impedance method
T/GRM 062-2023 Testing method for physical dispersion attenuation of low-frequency vibration sources in rocks
T/CPSS 1008-2022 Test specification for impedance characteristics of power supply equipment in information system
T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
T/CSAE 189-2021 Test methods for the shielding high-voltage cable and connector of electric vehicles surface transfer impedance

SAE - SAE International, Test low frequency impedance

SAE J2366-1L-2001 ITS Data Bus - Low Impedance Stereo Audio (LISA)

工业和信息化部, Test low frequency impedance

SJ/T 11768-2020 Resistor low frequency noise parameter testing method
SJ/T 11767-2020 Diode low frequency noise parameter testing method
SJ/T 11765-2020 Transistor low-frequency noise parameter testing method
SJ/T 11705-2018 Ground and power supply impedance test methods for microelectronic device packages
SJ/T 11766-2020 Test method for low-frequency noise parameters of optocoupler devices
SJ/T 11769-2020 General requirements for testing methods of low-frequency noise parameters of electronic components

Association Francaise de Normalisation, Test low frequency impedance

NF A82-111:1989 Electric resistance welding. Low impedance cables. Sizes, specifications and tests.
NF A89-568:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds.
NF EN 60512-21-1:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 21-1 : essais de résistance aux fréquences radioélectriques - Essai 21a : résistance parallèle aux fréquences radioélectriques
NF EN 50065-7:2002 Transmission de signaux sur les réseaux électriques basse tension dans la bande de fréquences de 3 kHz à 148,5 kHz - Partie 7 : impédance des appareils
NF C93-400-21-1*NF EN 60512-21-1:2011 Connectors for electronic equipment - Tests and measurements - Part 21-1 : R.F. resistance tests - Test 21a : R.F. shunt resistance.
NF C93-537-1-11*NF EN 50289-1-11:2017 Communication cables - Specifications for test methods - Part 1-11 : electrical test methods - Characteristic impedance, input impedance, return loss
NF EN 50289-1-11:2017 Câbles de communication - Spécifications des méthodes d'essai - Partie 1-11 : méthodes d'essais électriques - Impédance caractéristique, impédance d'entrée, affaiblissement de réflexion
NF C26-287*NF EN 61621:1998 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges.
NF EN 50065-4-4:2005 Transmission de signaux sur les réseaux électriques basse tension dans la bande de fréquences de 3 kHz à 148,5 kHz - Partie 4-4 : filtres basse tension de découplage - Filtre d'impédance
NF C90-133-4-16*NF EN IEC 62153-4-16:2021 Metallic cables and other passive components test methods - Part 4-16 : electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usi
NF C90-201-7*NF EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7 : equipment impedance
NF C90-201-4-4*NF EN 50065-4-4:2005 Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4 : low voltage decoupling filter - Impedance filter.
NF G38-202*NF EN 14575:2005 Geosynthetic barriers - Screening test method for determining the resistance to oxidation
NF A89-568*NF EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
NF EN IEC 61000-4-18:2019 Compatibilité électromagnétique (CEM) - Partie 4-18 : techniques d'essai et de mesure - Essai d'immunité à l'onde oscillatoire amortie
NF P98-220-1:1993 Tests relating to pavements. Anti-slip measurements. Part 1: Ground measurements using low-speed anti-skid devices
NF C91-004-10*NF EN 61000-4-10:2017 Electromagnetic compatibility (EMC) - Part 4-10 : testing and measurement techniques - Damped oscillatory magnetic field immunity test
NF EN 61000-4-12:2017 Compatibilité électromagnétique (CEM) - Partie 4-12 : techniques d'essai et de mesure - Essai d'immunité à l'onde sinusoïdale fortement amortie
NF EN 61000-4-10:2017 Compatibilité électromagnétique (CEM) - Partie 4-10 : techniques d'essai et de mesure - Essai d'immunité au champ magnétique oscillatoire amorti
NF C42-198-3*NF EN 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3 : loop impedance.
NF P94-160-4:1994 Sols : reconnaissance et essais - Auscultation d'un élément de fondation - Partie 4 : méthode par impédance.
NF C31-888-15*NF EN 61788-15:2012 Superconductivity - Part 15 : electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
NF EN 61788-15:2012 Supraconductivité - Partie 15 : mesures de caractéristiques électroniques - Impédance de surface intrinsèque de films supraconducteurs aux fréquences micro-ondes
NF C91-004-13/A2*NF EN 61000-4-13/A2:2016 Electromagnetic compatibility (EMC) - Part 4-13 : testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
NF EN 61000-4-13:2002 Compatibilité électromagnétique (CEM) - Partie 4-13 : techniques d'essai et de mesure - Essais d'immunité basse fréquence aux harmoniques et inter-harmoniques incluant les signaux transmis sur le réseau électrique alternatif
NF EN 61000-4-13/A2:2016 Compatibilité électromagnétique (CEM) - Partie 4-13 : techniques d'essai et de mesure - Essais d'immunité basse fréquence aux harmoniques et inter-harmoniques incluant les signaux transmis sur le réseau électrique alternatif
NF EN 61000-4-13/A1:2009 Compatibilité électromagnétique (CEM) - Partie 4-13 : techniques d'essai et de mesure - Essais d'immunité basse fréquence aux harmoniques et inter-harmoniques incluant les signaux transmis sur le réseau électrique alternatif
NF C91-004-18*NF EN 61000-4-18:2007 Electromagnetic compatibility (EMC) - Part 4-18 : testing and measurement techniques - Damped oscillatory wave immunity test.
NF EN 3475-807:2003 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 807 : impédance de transfert
NF EN 3475-805:2003 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 805 : impédance caractéristique
NF C91-004-18/A1*NF EN 61000-4-18/A1:2011 Electromagnetic compatibility (EMC) - Part 4-18 : testing and measurement techniques - Damped oscillatory wave immunity test.
NF EN 60512-23-7:2005 Connecteurs pour équipements électroniques - Essais et mesures - Partie 23-7 : essais d'écrantage et de filtrage - Essai 23g : impédance de transfert efficace des connecteurs
NF EN 61000-4-28:2000 Compatibilité électromagnétique (CEM) - Partie 4-28 : techniques d'essai et de mesure - Essai d'immunité à la variation de la fréquence d'alimentation
NF EN 61000-4-28/A1:2004 Compatibilité électromagnétique (CEM) - Partie 4-28 : techniques d'essai et de mesure - Essai d'immunité à la variation de la fréquence d'alimentation
NF EN 60512-25-7:2005 Connecteurs pour équipements électroniques - Essais et mesures - Partie 25-7 : essais 25g : impédance, coefficient de réflexion et rapport d'ondes stationnaires en tension (VSWR)
NF R12-754:2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results.

YU-JUS, Test low frequency impedance

JUS N.A5.130-1984 Testitng of insulating materials for electrical purposes. Method of testing the resistance of insulating materials to tow voltage electric are
JUS N.C6.002-1981 Radio-frequency cables. Measuring methods of mean characteristic impedance (Zm) and velocity ratio.
JUS N.C6.010-1982 Radio-frequency cables. Measuring methods of uniformity oflocal characteristic impedance
JUS N.C6.009-1982 Radio-frequency cables. Maasuring methods of unifomtity of effective characteristic impedance
JUS N.R1.112-1977 Electronic tubes. Measurements of the ekctrical properties. Methods of measuring electrode resistance, transconductance, amplification factor, conversion resistance and conversion transconductance
JUS N.C6.004-1981 Radio- frequency cables. Measuring of dielectric strength of cable ?ore and insulation resistance
JUS N.C0.035-1983 Tatting of insulatad conductors and cables. Measurement of electrical resistance of conductors.
JUS N.C0.050-1984 Electrical power andlighting. Tests of insulatedconductors and cables. I/Vear resistance
JUS N.C0.041-1984 Testing ofcables and flexible cords. Resistance to direct voltage
JUS N.B2.762-1990 Low voltage electrical installations. Verification of conditions for protection by automatic disconnection of supply, Measurement of earth electrode resistance
JUS N.A5.734-1984 Basic environmental testingprocedures. Test Fdc random vibration wide band - Reproducibility low

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test low frequency impedance

GB/T 27603-2011 Measurement of radiofrequency impedance for industrial electric detonator
GB/T 12792-1991 Methods of measurement of impedance uniformity for radio-frequency cables
GB/T 17626.28-2006 Electromagnetic compatibility Testing and measurement techniques Variation of power frequency, immunity test
GB/T 12180-1990 Test methods for general purpose low frequency signal generators
GB/T 17626.10-1998 Electromagnetic compatibility--Testing and measurement techniques--Damped oscillatory magnetic field immunity test
GB/T 17626.13-2006 Electromagnetic compatibility Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test
GB/T 17626.8-1998 Electromagnetic compatibility--Testing and measurement techniques--Power frequency magnetic field immunity test
GB/T 17626.8-2006 Electromagnetic compatibility Testing and measurement techniques Power frequency magnetic field immunity test
GB/T 3789.29-1991 Measurements of the electrical properties of transmitting tubes--Method of measuring the non-linearity in the luminance of the lower frequency
GB/T 24522-2009 Metallic materials-Method of test for the determination of resistance to stable crack extension using specimens of low constraint
GB/T 17626.3-1998 Electromagnetic compatibility--Testing and measurement techniques--Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2006 Electromagnetic compatibility Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test
GB/T 18216.3-2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring or monitoring of protective measures- Part 3: Loop impedance
GB/T 18216.5-2012 Electrical safety in low voltage distrubution systems up to 1000V a.c.and 1500V d.c..Equipment for testing,measuring or monitoring of protective measures.Part 5:Resistance to earth
GB/T 18216.3-2012 Electrical safety in low voltage distribution systems up to 1000V a.c. and 1500V d.c..Equipment for testing,measuring or monitoring of protective measures.Part 3:Loop impedance

Military Standard of the People's Republic of China-General Armament Department, Test low frequency impedance

GJB 736.15-1994 Test methods for pyrotechnics - Determination of radio frequency impedance of electrical pyrotechnics
GJB 5309.12-2004 Test methods for pyrotechnics Part 12: Radio frequency impedance determination
GJB 736.15A-2019 Test methods for pyrotechnics Part 15: Determination of radio frequency impedance of electrical pyrotechnics

ES-AENOR, Test low frequency impedance

UNE 20 527 h2

CZ-CSN, Test low frequency impedance

CSN 62 1459-1958
CSN 34 5615 Z3-1997
CSN 64 0781-1983 Plastics. ethods of resistance test gainst mildews.
CSN 34 7010 Cast.40-1973 Ozone resistance test and discharge resistance test (U-bend test)
CSN 34 5615 Z4-1998
CSN 77 0335-1980 Containers for aerosols. Method for testing the resistance against inner overpressure
CSN 34 6467-1986 Test method for determination of resistance of insulating materials to low-voltage, high-current d.c. arc

Society of Automotive Engineers (SAE), Test low frequency impedance

SAE J2366/1L-2001 ITS Data Bus - Low Impedance Stereo Audio (LISA)
SAE J2598-2020 Automotive Disc Brake Pad Natural Frequency and Damping Test
SAE J3002-2021 Disc and Drum Brake Dynamometer Low-Frequency Noise Test Procedure
SAE TS340-1-1987 TS340 Test for Electrical Connectors Contact Resistance - Low Current (Size 16 and 20 Sizes Only)

British Standards Institution (BSI), Test low frequency impedance

BS EN ISO 16773-2:2007 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Collection of data
BS EN ISO 16773-1:2007 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Terms and definitions
BS IEC 62153-4-16:2016 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
BS ISO 20860-2:2009 Road vehicles - 50 ohms impedance radio frequency connection system interface - Test procedures
BS EN ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Examples of spectra of polymer-coated specimens
BS EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Equipment impedance
BS EN ISO 16773-3:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Processing and analysis of data from dummy cells
BS EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Low voltage decoupling filters - Impedance filter
BS EN 50065-7:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Equipment impedance
BS EN 50289-1-11:2016 Tracked Changes. Communication cables. Specifications for test methods. Electrical test methods. Characteristic impedance, input impedance, return loss
BS EN ISO 16773-4:2017 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens. Part 4: Examples of spectra of polymer-coated specimens
BS EN ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens. Collection of data
BS EN 50065-4-4:2023 Tracked Changes. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Low voltage decoupling filter. Impedance filter
BS EN ISO 16773-1:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens. Terms and definitions
BS EN IEC 61000-4-18:2019 Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test
BS EN 61000-4-18:2007 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Damped oscillatory wave immunity test
BS EN 60512-21-1:2010 Connectors for electronic equipment. Tests and measurements. Part 21-1: R.F. resistance tests. Test 21a: R.F. shunt resistance
BS EN 61557-3:2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Loop impedance
BS EN 61788-15:2011 Superconductivity. Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
BS EN 61000-4-13:2002+A2:2016 Electromagnetic compatibility (EMC) - Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
21/30422308 DC BS EN 50065-4-4. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 4-4. Low voltage decoupling filter. Impedance filter
BS EN 14575:2005 Geosynthetic barriers - Screening test method for determining the resistance to oxidation
BS EN ISO 14271:2017 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
BS EN IEC 62153-4-16:2021 Metallic cables and other passive components test methods. Electromagnetic compatibility (EMC). Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxia
BS EN 61000-4-10:2017 Tracked Changes. Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory magnetic field immunity test
BS EN 61000-4-18:2007+A1:2010 Electromagnetic compatibility (EMC). Part 4-18: Testing and measurement techniques. Damped oscillatory wave immunity test
BS EN IEC 61557-3:2022 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures - Part 3. Loop impedance
BS EN 13415:2010 Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
BS EN ISO 16773-3:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens. Processing and analysis of data from dummy cells
BS EN 61000-4-3:2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
BS EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Chemical resistance tests - Test 19a - Fluid resistance of pre-insulated crimp barrels
BS EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power frequency magnetic field immunity test
BS EN 61000-4-13:2002+A1:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
BS EN 61000-4-13:2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests - Test for immunity to harmonics and interharmonics including mains signall
BS EN 13146-2:2012 Railway applications. Track. Test methods for fastening systems. Determination of torsional resistance
BS EN 13146-2:2002 Railway applications - Track - Test methods for fastening systems - Determination of torsional resistance
BS EN IEC 61000-4-3:2020 Tracked Changes. Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test

Professional Standard - Machinery, Test low frequency impedance

JB/T 7585-1994 D.C. low resistance tester
JB/T 7585-2013 Tester for direct current low-resistence

Professional Standard - Electron, Test low frequency impedance

SJ 2534.14-1985 Test procedures for antennas--Measurement of impedances
SJ 20788-2000 Measurment method for thermal impedance of semiconductor diodes
SJ 2139-1982 Methods of measurement for dynamic impedance of silicon current regulator diodes
SJ 2148-1982 Methods of measurement for dynamic impedance of silicon current regulator transistors
SJ/Z 9010.12-1987 Measurements of electrical properties of electronic tubes and valves--Part 12: Methods of measuring for electrode resistance, transcondductance, amplification factor, conversion resistance and conversion transconductance
SJ/Z 9010.9-1987 Measurements of electrical properties of electronic tubes and valves--Part 9: Methods of measuring the cathode-interface impedance
SJ/T 11846-2022 Voltage regulator low-frequency noise parameter test method
SJ 429-1973 Methods of measurement for frequency ranges of low noise travelling wave tubes
SJ 1488-1979 Method of measurement for rated high-frequency on-state mean current Ir of reverse blocking high-frequency thyristors

RU-GOST R, Test low frequency impedance

GOST 19656.12-1976 Semicondactor UHF mixer diodes. Measurement method of input impedance
GOST R IEC 61557-3-2006 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance
GOST 21136-1975 Complete, filled transport packages-vibrations test at fixed low frequency
GOST IEC 61000-4-13-2016 Electromagnetic compatibility (EMC). Part 4-13. Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port. Low frequency immunity tests

US-FCR, Test low frequency impedance

FCR COE ETN 80-5 SUPPLEMENT 1-1981 FACILITIES ENGINEERING GROUND IMPEDANCE TESTING
FCR COE ETN 80-5-1979 FACILITIES ENGINEERING GROUND IMPEDANCE TESTING

CENELEC - European Committee for Electrotechnical Standardization, Test low frequency impedance

EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance
DD ENV 50140-1993 Electromagnetic Compatibility - Basic Immunity Standard - Radiated@ Radio-Frequency Electromagnetic Field - Immunity Test
EN 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
DD ENV 50141-1993 Electromagnetic Compatibility - Basic Immunity Standard - Conducted Disturbances Induced by Radio- Frequency Fields - Immunity Test

Danish Standards Foundation, Test low frequency impedance

DS/EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance
DS/EN 50289-1-11:2002 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss
DS/EN IEC 62153-4-16:2021 Metallic cables and other passive components test methods – Part 4-16: Electromagnetic compatibility (EMC) – Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usin
DS/EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance
DS/EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter - Impedance filter
DS/EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
DS/EN ISO 14271/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
DS/EN 61000-4-18:2008 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
DS/EN 61000-4-18/A1:2010 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
DS/EN 61000-4-18/Corr.:2008 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
DS/EN 61000-4-10/A1:2001 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
DS/EN 61000-4-13/A1:2009 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
DS/EN 61000-4-13:2002 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics, including mains signalling at a.c. power port, low frequency immunity tests
DS/EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
DS/EN 61788-15:2012 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
DS/EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
DS/EN 61000-4-28/A1:2004 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test
DS/EN 61000-4-28:2000 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test
DS/EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
DS/EN 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
DS/EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc dischargers

ES-UNE, Test low frequency impedance

UNE-EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (Endorsed by AENOR in October of 2010.)
UNE-EN 50289-1-11:2017 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss
UNE-EN 50065-4-4:2023 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter
EN 50065-4-4:2023 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter
UNE-EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
UNE-EN IEC 61000-4-18:2019/AC:2019-10 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (Endorsed by Asociación Española de Normalización in November of 2019.)
UNE-EN IEC 61000-4-18:2019 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN 61000-4-10:2017 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
UNE-EN 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies (Endorsed by AENOR in March of 2012.)
UNE-EN 61000-4-13:2003/A2:2016 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
UNE-EN IEC 61557-3:2022 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance (Endorsed by Asociación Española de Normalización in July of 2022.)

Indonesia Standards, Test low frequency impedance

SNI 15-1572-1989 Detergen resistance of glaze, Test method
SNI 04-6545.3-2001 Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures. Part 3: Loop impedance
SNI IEC 61000-4-13:2013 Electromagnetic Compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
SNI IEC 61000-4-8:2013 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

Professional Standard - Coal, Test low frequency impedance

MT/T 858-2000 Measurement and test methods of cutting resistance for coal

Korean Agency for Technology and Standards (KATS), Test low frequency impedance

KS R 9190-2003(2013)
KS F 2732-2008 Testing method for pullout strength to conclude compressive strength of concrete
KS M ISO 16773-4:2013 Paints and varnishes ㅡ Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens ㅡ Part 4: Examples of spectra of polymer-coated specimens
KS C 6301-2002 TESTING METHODS FOR LOW FREQUENCY TRANSFORMERS AND INDUCTORS
KS C 6301-1987 TESTING METHODS FOR LOW FREQUENCY TRANSFORMERS AND INDUCTORS
KS F 2733-2008 Testing method for penetration resistance to conclude compressive strength of concrete
KS F 2733-2023 Testing method for penetration resistance to conclude compressive strength of concrete
KS F 2733-2018 Standard test method for penetration resistance to conclude compressive strength of concrete
KS C 0264-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASUREMENT TECHNIQUES-RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
KS C 6111-3-2007(2022) Electronic characteristic measurements－Intrinsic surface impedance of high-TC superconductor films at microwave frequencies
KS C 6111-3-2007(2017) Electronic characteristic measurements－Intrinsic surface impedance of high-TC superconductor films at microwave frequencies
KS C 6111-3-2007 Electronic characteristic measurements－Intrinsic surface impedance of high-TC superconductor films at microwave frequencies
KS C 0269-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASURMENT TECHNIQUES-POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
KS C 0304-1-2009 Test method of magnetic shielding effectiveness in SLF range
KS C 0271-1995 Electromagnetic compatibility-Testing and measurement techniques -Damped oscillatory magnetic field immunity test
KS C 0271-1995(2017) Electromagnetic compatibility-Testing and measurement techniques -Damped oscillatory magnetic field immunity test
KS C 0267-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASUREMENT TECHNIQNES -IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO FREQUENCY FIELDS
KS C 0269-1995 Electromagnetic compatibility-Testing and measurement techniques-Power frequency magnetic field immunity test
KS C IEC 61000-4-18:2014 Electromagnetic compatibility(EMC) — Part 4-18: Testing and measurement techniques — Damped oscillatory wave immunity test
KS C IEC 61557-3:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 3：Loop impedance
KS C IEC 61000-4-28:2010 Electromagnetic compatibility(EMC)－Part 4-28：Testing and measurement techniques－Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
KS C IEC 61557-3-2013(2018) Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 3：Loop impedance
KS C 9610-4-8-2017 Electromagnetic compatibility(EMC) — Part 4-8: Testing and measurement techniques — Power frequency magnetic field immunity test
KS C IEC 60512-23-7:2009 Connectors for electronic equipment-Tests and measurements-Part 23-7:Screening and filtering tests-Test 23g:Effective transfer impedance of connectors
KS C IEC 60512-23-7:2014 Connectors for electronic equipment－Tests and measurements－Part 23-7：Screening and filtering tests－Test 23g：Effective transfer impedance of connectors
KS C IEC 61621-2014(2019) Dry, solid insulating materials — Resistance test to high-voltage, low-current arc discharges

Hebei Provincial Standard of the People's Republic of China, Test low frequency impedance

DB13/T 5384-2021 Test procedure for soil bulk density by complex impedance method

Professional Standard - Aerospace, Test low frequency impedance

QJ 2715-1995 Ultra-low frequency signal test method
QJ 2941-1997 Medium and low frequency phase test method
QJ 2699-1995 Low frequency magnetic field susceptibility test method
QJ 1827-1989 Test method for contact resistance of low-resistance metal plating layer and chemical conversion film layer

Professional Standard-Ships, Test low frequency impedance

CB 1129-1985 Test method for pressure frequency and impedance frequency dynamic characteristics of isolated pneumatic accumulators
CB 20136-2015 Measurement method of mechanical impedances of flexible pipe in three translational directions

International Electrotechnical Commission (IEC), Test low frequency impedance

IEC 62153-4-16:2016 Metallic communication cable test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial s
IEC 62153-4-16:2021 Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usin
IEC 61000-4-13:2002/AMD2:2015 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-4-13:2015 Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-4-10:2016 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
IEC 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
IEC 61000-4-28:2001 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test
IEC 61196-1-116:2015 Coaxial communication cables - Part 1-116: Electrical test methods - Test for impedance with time domain reflectometry (TDR)
IEC 61557-3:2019 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
IEC 61557-3:2019 RLV Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
IEC 61000-4-10:2001 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test

American Society for Testing and Materials (ASTM), Test low frequency impedance

ASTM C384-04(2016) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM C384-03 Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
ASTM C384-04 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM C384-04(2011) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM B457-67(2008)e1 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B457-67(2003) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B457-67(2018) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B457-67(1998) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM F1680-02 Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM D7766/D7766M-11 Standard Practice for Damage Resistance Testing of Sandwich Constructions
ASTM F1680-07 Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM F1680-07a Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM B457-67(2013) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM E1050-98 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones, and a Digital Frequency Analysis System
ASTM E1050-19 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
ASTM E1050-08 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
ASTM E1050-07 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
ASTM E1050-10 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
ASTM D8370-22 Standard Test Method for Field Measurement of Electrochemical Impedance on Coatings and Linings
ASTM A1038-10a Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM A1038-13 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM A1038-19 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM E1050-12 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System
ASTM E1050-98(2006) Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System

Lithuanian Standards Office , Test low frequency impedance

LST EN 60512-21-1-2010 Connectors for electronic equipment - Tests and measurements -- Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (IEC 60512-21-1:2010)
LST EN 50065-7-2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 7: Equipment impedance
LST EN 50065-4-4-2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter. Impedance filter
LST EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011)
LST EN 61000-4-18-2007 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (IEC 61000-4-18:2006)
LST EN 61000-4-18-2007/AC-2008 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (IEC 61000-4-18:2006)
LST EN 61000-4-13-2003 Electromagnetic compatibility (EMC). Part 4-13: Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002)

AENOR, Test low frequency impedance

UNE-EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 7: Equipment impedance.
UNE-EN 50289-1-11:2002 Communication cables - Specifications for test methods -- Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss.
UNE-EN 50065-4-4:2004 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 4-4: Low voltage decoupling filter - Impedance filter
UNE-EN 61000-4-18:2008/A1:2011 Electromagnetic compatibility (EMC) -- Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
UNE-EN 61000-4-10/A1:2001 Electromagnetic compatibility (EMC) -- Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test.
UNE-EN 61000-4-13:2003/A1:2010 Electromagnetic compatibility (EMC) -- Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
UNE-EN 61000-4-13:2003 Electromagnetic compatibility (EMC) -- Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
UNE-EN 61000-4-18:2008 Electromagnetic compatibility (EMC) -- Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (IEC 61000-4-18:2006).

VE-FONDONORMA, Test low frequency impedance

NORVEN 55-3-1960

European Committee for Standardization (CEN), Test low frequency impedance

EN ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens
EN 12774:1999 Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance
EN 3475-805:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance
EN 3475-807:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance
EN 2591-B1:1992 Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part B 1: Contact Resistance - Low Level

National Electrical Manufacturers Association（NEMA), Test low frequency impedance

NEMA WC 61-1992 Transfer Impedance Testing (Modified MIL-C-85485 Test Method) R(2000)

RO-ASRO, Test low frequency impedance

STAS 6834-1975 Tests of metals TENSILE TEST AT LOW TEMPERATURES

German Institute for Standardization, Test low frequency impedance

DIN EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter; Impedance filter; German version EN 50065-4-4:2003
DIN 41640-54:1988-10 Measuring methods and testing procedures for electromechanical components; test 23a: transfer impedance
DIN 45105-4:1981 Quartz crystal units; methods for the measurement of frequency and equivalent resistance of unwanted resonances of filter crystal units
DIN EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance; German version EN 50065-7:2001
DIN EN ISO 14271:2018-01 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017); German version EN ISO 14271:2017
DIN 41640-54:1988 Measuring methods and testing procedures for electromechanical components; test 23a: transfer impedance
DIN EN 61000-4-18:2007 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (IEC 61000-4-18:2006); German version EN 61000-4-18:2007 + Cor.: 2007
DIN EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
DIN EN 60512-25-7:2005-12 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and standing voltage wave ratio (VSWR) (IEC 60512-25-7:2004); German version EN 60512-25-7:2005
DIN EN ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens (ISO 16773-4:2009); English version of DIN EN ISO 16773-4:2009-09
DIN EN 60512-23-7:2005-10 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors (IEC 60512-23-7:2005); German version EN 60512-23-7:2005

European Committee for Electrotechnical Standardization（CENELEC）, Test low frequency impedance

EN 50065-7:2001 Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz - Part 7: Equipment Impedance
EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter

ESD - ESD ASSOCIATION, Test low frequency impedance

SP5.3.3-2018 Electrostatic Discharge Sensitivity Testing Charged Device Model (CDM) Testing – Component Level Low-Impedance Contact CDM as an Alternative CDM Characterization Method

Electronic Components, Assemblies and Materials Association, Test low frequency impedance

ECA IS-46-1987 Test Procedure for Resistance to Soldering (Vapor Phase Technique) for Surface Mount Devices
ECA 186-7E-1978 Passive Electronic Component Parts, Test Methods for; Method 7: Vibration Fatigue Test (Low Frequency, 10 to 55 Hertz)

American National Standards Institute （ANSI), Test low frequency impedance

ANSI/SCTE 50-2007 Test Procedure for Measuring Regularity of Impendance of Coaxial Cable
ANSI S4.30-1992 Standard test method for audio engineering - Measurement of the lowest resonance frequency of loudspeaker cones

Guangdong Provincial Standard of the People's Republic of China, Test low frequency impedance

DB44/T 1903-2016 Circuit Board Characteristic Impedance Test Method Time Domain Reflectometry

Professional Standard - Electricity, Test low frequency impedance

DL/T 845.2-2004 General specifications for measuring resistance equipments Part 2: power frequency earth resistance testers
DL/T 845.2-2020 General Specifications for Resistance Measuring Devices Part 2: Power Frequency Grounding Resistance Tester

The American Road & Transportation Builders Association, Test low frequency impedance

AASHTO T 288-1991 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity

Japanese Industrial Standards Committee (JISC), Test low frequency impedance

JIS K 3834:1990 Testing methods for specific resistivity recovery characteristic of water filtered by membranes
JIS H 8452:2008 Testing method for thermal cycle resistance of oxidation resistant metallic coatings
JIS C 6435:1989 Testing methods for low frequency transformers and inductors
JIS K 3822:1990 Testing methods for specific resistivity recovery characteristic of water filtered by ultrafiltration modules

National Metrological Technical Specifications of the People's Republic of China, Test low frequency impedance

JJF 2000-2022 Calibration specification for loop impedance/prospective short-circuit current tester
JJF 1895-2021 Calibration Specification for Semiconductor Devices DC and Low Frequency Parameters Test Equipments

AT-OVE/ON, Test low frequency impedance

OVE EN 50065-4-4-2021 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter - Impedance filter (english version)

Professional Standard - Post and Telecommunication, Test low frequency impedance

YD/T 647-1994 Quality grading criteria of HF and LF noise testers

PL-PKN, Test low frequency impedance

PN E04443-1965 Solid elec?rical insula?ing ma?erials Testing of highcurrent and lowvol?age arc resis?ance
PN E06211-1973 Industrial Iow temperature batch-type electric res?stance furnaces Generals reguirements and tests
PN C05011 ArkusZ06-1972 Test methods of conveyer belts Determination of the resistance to Iow temperatures
PN O79166-1991 Complete filled transport packages. Vibration test at fixed low frequency
PN T80051-1986 Electronic components Fixed low-power nonwirewound resistors General requirements and test
PN E04160-46-1987 Electric cables Methods of testing Test of resistance to Iow temperature of rubber of thermoplastic insulation of sheath

PT-IPQ, Test low frequency impedance

NP 2984-1985
NP EN 13523-5-2002 Coil coated metals Test methods Part 5:Resistance to rapid deformation(impact test)

United States Navy, Test low frequency impedance

NAVY MIL-STD-2151 VALID NOTICE 1-1991 INCLINED LADDER TREAD TEST METHODS AND EQUIPMENT FOR WEAR, SLIP-RESISTANCE AND IMPACT
NAVY MIL-STD-2151-1984 INCLINED LADDER TREAD TEST METHODS AND EQUIPMENT FOR WEAR, SLIP-RESISTANCE AND IMPACT

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test low frequency impedance

GB/T 17626.18-2016 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory wave immunity test
GB/T 17626.10-2017 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory magnetic field immunity test

Standard Association of Australia （SAA）, Test low frequency impedance

AS/NZS 61000.4.13:2012
AS/NZS IEC 61000.4.3:2013
AS/NZS 61000.4.13:2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
AS/NZS 61000.4.8:2012
AS/NZS 61000.4.8:2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-8:2009 RLV Electromagnetic compatibility (EMC) — Part 4-8: Testing and measurement techniques — Power frequency magnetic field immunity test
AS/NZS IEC 61000.4.3:2021 Electromagnetic compatibility (EMC), Part 4.3: Testing and measurement techniques — Radiated, radio-frequency, electromagnetic field immunity test
AS/NZS IEC 61000.4.6:2013

Professional Standard - Petroleum, Test low frequency impedance

SY/T 5585.1-1993 Test method of electrical parameters of seismic data transmission cable Characteristic impedance and propagation time test

TR-TSE, Test low frequency impedance

TS 2452-1976 MEASUBEMENTS OF THE ELECTRICAL PROPERTIES OF EIJECTRONIC TUBES AND VALVES PART 12 : METHODS OF MEASURING ELECTRODE RESISTANCE, TRANSCONDUCTANE, AMPLIFICATION FACTOR, CONVERSION RESISTANCE AND CONVERSION TRANSCONDUCTANCE
TS 2449-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 9 : METHODS OF MEASURING THE CATHODE-INTERFACE IMPEDANCE
TS 2100-1975 BASIC ENVIROMENTAL TESTING PROCEDURES TEST Fdc : RANDOM VIBRATION WIDE BAND — REPRODUCIBILITY LOW

International Organization for Standardization (ISO), Test low frequency impedance

ISO 20860-2:2009 Road vehicles - 50 ohms impedance radio frequency connection system interface - Part 2: Test procedures
ISO 16773-2:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data
ISO 16773-1:2016 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions
ISO 22889:2013 Metallic materials.Method of test for the determination of resistance to stable crack extension using specimens of low constraint

ECIA - Electronic Components Industry Association, Test low frequency impedance

364-23A-1985 TP-23A Low Level Contact Resistance Test Procedure for Electrical Connectors
EIA-364-23B-2000 TP-23B Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets
EIA-364-23C-2006 TP-23C Low Level Contact Resistance Test Procedure For Electrical Connectors and Sockets
SP2426-A-2002 Low Frequency Shielding Effectiveness Test Procedure for Electrical Connectors and Sockets
EIA-364-108-2000 TP-108 Impedance@ Reflection Coefficient@ Return Loss@ and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors@ Cable assemblies or Interconnection Systems
EIA-364-108 ERTA-2016 TP-108 Impedance@ Reflection Coefficient@ Return Loss@ and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors@ Cable Assemblies or Interconnection Systems
EIA/ECA-364-23C-2006 TP-23C LOW LEVEL CONTACT RESISTANCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS
186-7E-1978 Passive Electronic Component Parts@ Test Methods for; Method 7: Vibration Fatigue Test (Low Frequency@ 10 to 55 Hertz)
EIA-364-80-2002 TP-80 Low Frequency Shielding Effectiveness Test Procedure for Electrical Connectors and Sockets

AT-ON, Test low frequency impedance

ONORM EN 2591-B6-1994 Aerospace series. Elements of electrical and optical connection. Test methods. Part B6: Measurement of insulation resistance

未注明发布机构, Test low frequency impedance

BS EN 61788-15:2011(2012) Superconductivity Part 15 : Electronic characteristic measurements – Intrinsic surface impedance of superconductor films at microwave frequencies

European Association of Aerospace Industries, Test low frequency impedance

AECMA PREN 4158-2005 Aerospace series Paints and varnishes Test method for measurements of electrical surface resistance of conductive layers Edition P 1

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Test low frequency impedance

JEDEC JESD51-51-2012 Implementation of the Electrical Test Method for the Measurement of Real Thermal Resistance and Impedance of Light-Emitting Diodes with Exposed Cooling

国家市场监督管理总局、中国国家标准化管理委员会, Test low frequency impedance

GB/T 24522-2020 Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint

Electronic Components, Assemblies and Materials Association, Test low frequency impedance

ECA EIA-364-23C-2006 TP-23C Low Level Contact Resistance Test Procedure For Electrical Connectors and Sockets
ECA EIA-364-108-2000(R2007) TP-108 Impedance, Reflection Coefficient, Return Loss, and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors, Cable assemblies or Interconnection Systems
ECA EIA-364-108 ERTA-2016 TP-108 Impedance, Reflection Coefficient, Return Loss, and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors, Cable Assemblies or Interconnection Systems
EIA_ECA-364-23C-2006 TP-23C LOW LEVEL CONTACT RESISTANCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS

Institute of Electrical and Electronics Engineers (IEEE), Test low frequency impedance

IEEE Std 433-2009 IEEE Recommended Practice for Insulation Testing™ of AC Electric Machinery with High Voltage at Very Low Frequency - Redline
IEEE Unapproved Draft Std P433/D16 Oct 2009 Draft Recommeded Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
IEEE Std 844.3-2019/CSA C22.2 No. 293.3:19 IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - General, Testing, Marking, and Documentation Requirements

Canadian Standards Association (CSA), Test low frequency impedance

CAN/CSA-IEC 61000-4-18:2014 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (First Edition)

BE-NBN, Test low frequency impedance

NBN H 03-326-1987

ZA-SANS, Test low frequency impedance

SANS 61000-4-10:2003 Electromagnetic compatibility (EMC) Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test

IN-BIS, Test low frequency impedance

IS 7028 Pt.2-1988

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Test low frequency impedance

IEEE P844.3/C22.2 293.3/D1-2018 Draft Standard for Impedance Heating of Pipelines and Equipment - General@ Testing@ Marking@ and Documentation Requirements
IEEE P844.3/C22.2 293.3/D0-2018 Draft Standard for Impedance Heating of Pipelines and Equipment - General@ Testing@ Marking@ and Documentation Requirements