ZH
RU
ES

Micro UV Spectrophotometer Application

Micro UV Spectrophotometer Application, Total:42 items.

In the international standard classification, Micro UV Spectrophotometer Application involves: Optics and optical measurements, Organic chemicals, Natural gas, Vocabularies, Radiation measurements, Coals, Metalliferous minerals, Solar energy engineering, Plastics, Nuclear energy engineering, Lubricants, industrial oils and related products, Aerospace electric equipment and systems, Fruits. Vegetables.

American Society for Testing and Materials (ASTM), Micro UV Spectrophotometer Application

ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E958-93(1999) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E275-08(2022) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E275-08 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E275-08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM D1685-00 Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
ASTM D8496-23 Standard Test Method for Determination of Hydroquinone (HQ) Content in Vinyl Acetate Monomer (VAM) Using Ultraviolet-Visible (UV-Vis) Spectrophotometer
ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

BELST, Micro UV Spectrophotometer Application

STB 8058-2017 System for ensuring uniformity of measurements of the Republic of Belarus. Ultraviolet-visible-nearinfrared spectrophotometers. Methods of verification

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Micro UV Spectrophotometer Application

GB/T 11060.8-2012 Natural gas.Determination of sulfur compound.Part 8:Determination of total sulfur content by ultraviolet fluorescence method

国家市场监督管理总局、中国国家标准化管理委员会, Micro UV Spectrophotometer Application

GB/T 11060.8-2020 Natural gas—Determination of sulfur compounds—Part 8：Determination of total sulfur content by ultraviolet fluorescence method

German Institute for Standardization, Micro UV Spectrophotometer Application

DIN EN 14255-4:2007 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements; English version of DIN EN 14255-4:2007-02
DIN EN 2714-007:2007 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2714-007:20
DIN EN 2267-005:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 005: UV laser printable - Product standard; German and English version EN 2267-005:2006

Indonesia Standards, Micro UV Spectrophotometer Application

SNI 13-6345-2000 Determination of trace elements in coal and coke ash by atomic absorpsion spectrophotometer

British Standards Institution (BSI), Micro UV Spectrophotometer Application

PD CEN/TS 17784-1:2022 Organo-mineral fertilizers. Identification of complexing agents.. Method using UV-Vis spectrophotometry and gravimetry
BS EN 62788-1-4:2016+A1:2020 Measurement procedures for materials used in photovoltaic modules - Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
18/30387052 DC BS EN 62788-1-4 AMD1. Measurement procedures for materials used in photovoltaic modules. Part 1-4. Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
BS EN 2267-007:2005 Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard

ES-UNE, Micro UV Spectrophotometer Application

UNE-CEN/TS 17784-1:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 62788-1-4:2017/A1:2021 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
UNE-EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength

Danish Standards Foundation, Micro UV Spectrophotometer Application

DS/EN 62788-1-4:2020 Measurement procedures for materials used in photovoltaic modules – Part 1-4: Encapsulants – Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength

International Electrotechnical Commission (IEC), Micro UV Spectrophotometer Application

IEC 62788-1-4:2016/AMD1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016+AMD1:2020 CSV Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness

Association Francaise de Normalisation, Micro UV Spectrophotometer Application

NF C57-788-1-4/A1*NF EN 62788-1-4/A1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4 : encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
XP PR EN 2712-007:1996 Série aérospatiale - Câbles, électriques, mono et multiconducteurs, d'usage général - Températures de fonctionnement comprises entre - 55 degrés Celsius et 150 degrés Celsius - Partie 007 : blindés (guipés) et gaines, marquables au laser UV...
NF L52-275-008*NF EN 2267-008:2006 Aerospace series - Cables, electrical, for general purposes - Operating temperatures between - 55 oC and 260 oC - Part 008 : DM family, single UV laser printable and multicore assembly - Product standard
XP L52-290-008*XP PR EN 2712-008:1996 Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between 55 degrees celsius and 150 degrees celsius. Part 008 : screened (braided) and jacketed, uv laser printable. Product standard.
XP L52-290-007*XP PR EN 2712-007:1996 Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between 55 degrees celsius and 150 degrees celsius. Part 007 : screened (spiral) and jacketed, uv laser printable. Product standard.

Lithuanian Standards Office , Micro UV Spectrophotometer Application

LST EN 62788-1-4/A1-2021 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength (IEC 62788-1-4:2016/A

European Committee for Standardization (CEN), Micro UV Spectrophotometer Application

EN 2267-007:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard
EN 2267-008:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 008: DM family, single UV laser printable and multicore assembly - Product standard

European Association of Aerospace Industries, Micro UV Spectrophotometer Application

AECMA PREN 2712-008-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures Between - 55 Degrees C aand 150 Degrees C Part 008: Screened (Braided) and Jacketed, UV Laser Printable Product Standard
AECMA PREN 2712-010-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures Between - 55 Degrees C and 150 Degrees C Part 010: Screened (Braided) and Jacketed, YAG X3 Laser Printable Product Standard Edition P 1