ZH

RU

ES

three-primer primer

three-primer primer, Total:498 items.

In the international standard classification, three-primer primer involves: Paints and varnishes, Information sciences. Publishing, Products of the chemical industry, Materials for aerospace construction, Cargo equipment, Equipment for entertainment, Ground service and maintenance equipment, Products of the textile industry, Aircraft and space vehicles in general, Farming and forestry, Accident and disaster control, Fuels, Kitchen equipment, Analytical chemistry, Agricultural machines, implements and equipment, Services, Biology. Botany. Zoology, Fibre optic communications, Industrial trucks, Miscellaneous domestic and commercial equipment, Protection against dangerous goods, Protection against fire, Installations in buildings, Medical sciences and health care facilities in general, Refractories, Microbiology, Vocabularies, Hydraulic construction, Transport, Company organization and management, Veterinary medicine, Semiconductor devices, Construction materials, Rubber, Components for electrical equipment, Magnetic materials, Insulating fluids, Buildings, Fertilizers, Road vehicle systems, Occupational safety. Industrial hygiene, Road engineering.


ZA-SANS, three-primer primer

PL-PKN, three-primer primer

Indonesia Standards, three-primer primer

CZ-CSN, three-primer primer

U.S. Military Regulations and Norms, three-primer primer

British Standards Institution (BSI), three-primer primer

  • BS EN 13630-10:2005 Explosives for civil uses - Detonating cords and safety fuses - Determination of initiating capability of detonating cords
  • BS EN 13630-1:2004 Explosives for civil uses - Detonating cords and safety fuses - Requirements
  • BS EN 13630-5:2004 Explosives for civil uses - Detonating cords and safety fuses - Determination of resistance to abrasion of detonating cords
  • BS 4603:1970 Method for determination of residue on ignition or ash of chemical products
  • BS 5605:1990 Recommendations for citing and referencing published material
  • BS 3424-0:2000 Testing coated fabrics - Index of parts
  • BS 4323:1979 Method for determination of dimensional change of fabrics induced by free steam
  • BS 5438:1976 Methods of test for flammability of vertically oriented textile fabrics and fabric assemblies subjected to a small igniting flame
  • BS EN 13630-12:2003 Explosives for civil uses - Detonating cords and safety fuses - Determination of burning duration of safety fuses
  • BS EN 13630-12:2002(2003) Explosives for civil uses - Detonating cords and safety fuses - Determination of burning duration of safety fuses
  • BS EN 13630-12:2002 Determining the burning duration of detonating cords and safety fuses of civilian explosives
  • BS EN 13630-8:2003 Explosives for civil uses - Detonating cords and safety fuses - Determination of resistance to water of detonating cords and safety fuses
  • BS EN 13630-8:2002 Detonating cords and safety fuzes for civilian explosives Determining the water resistance of detonating cords and safety fuzes
  • BS EN 13630-8:2002(2003) Explosives for civil uses - Detonating cords and safety fuses - Determination of resistance to water of detonating cords and safety fuses
  • BS EN 13630-2:2003 Explosives for civil uses - Detonating cords and safety fuses - Determination of thermal stability of detonating cords and safety fuses
  • BS EN 13630-2:2002(2003) Explosives for civil uses - Detonating cords and safety fuses - Determination of thermal stability of detonating cords and safety fuses
  • BS EN 13630-2:2002 Determining the thermal stability of detonating cords and safety fuses for civilian explosives
  • PD CEN/TS 17700-3:2022 Plant biostimulants. Claims. Tolerance to abiotic stress resulting from the use of a plant biostimulant
  • BS 6368:1983 Specification for axial lead cores made of magnetic oxides or iron powder
  • BS EN 12159:2000 Builders hoists for persons and materials with vertically guided cages
  • BS EN 12159:2000+A1:2009 Builders hoists for persons and materials with vertically guided cages
  • BS EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
  • 21/30443213 DC BS EN 1860-3. Appliances, solid fuels and firelighters for barbecuing - Part 3. Firelighters for igniting solid fuels for use in barbecues and grill applications. Requirements and test methods
  • BS EN ISO 10722:2009 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material
  • BS EN ISO 10722:2007 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material
  • BS ISO 11992-1:2019 Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles - Physical and data-link layers
  • 23/30463066 DC BS EN 17700-3. Plant biostimulants. Claims - Part 3. Tolerance to abiotic stress resulting from the use of a plant biostimulant
  • BS EN 13763-7:2003 Explosives for civil uses - Detonators and relays - Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
  • BS EN 13631-12:2004 Explosives for civil uses - High explosives - Specifications of boosters with different initiating capability
  • BS EN 13763-6:2003 Explosives for civil uses - Detonators and relays - Determination of resistance to cracking in low temperatures of leading wires
  • BS EN 15466-2:2009 Primers for cold and hot applied joint sealants - Part 2:Determination of resistance against alkali
  • BS EN 15466-1:2009 Primers for cold and hot applied joint sealants - Part 1:Determination of homogeneity

US-FCR, three-primer primer

YU-JUS, three-primer primer

ES-AENOR, three-primer primer

United States Navy, three-primer primer

Society of Automotive Engineers (SAE), three-primer primer

Group Standards of the People's Republic of China, three-primer primer

中国民用航空局, three-primer primer

Association Francaise de Normalisation, three-primer primer

  • NF T70-630-10*NF EN 13630-10:2005 Explosives for civil uses - Detonating cords and safety fuses - Part 10 : Determination of initiating capability of detonating cords
  • NF T70-630-9*NF EN 13630-9:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 9 : determination of transmission of detonation from detonating cord to detonating cord
  • NF T70-630-5*NF EN 13630-5:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 5 : determination of resistance to abrasion of detonating cords
  • NF T70-630-1*NF EN 13630-1:2004 Explosives for civil use - Detonnating cords and safety fuses - Part 1 : requirements
  • NF E51-749:2007 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings.
  • XP CEN/TS 17700-3:2022 Biostimulants des végétaux - Allégations - Partie 3 : tolérance au stress abiotique résultant de l'utilisation d'un biostimulant des végétaux
  • G07-053:1989 Textiles. Determination of dimensional changes of fabrics induced by cold-water immersion.
  • NF G07-126*NF ISO 3005:2019 Textiles- Determination of dimensional change of fabrics induced by free-steam
  • NF P43-001*NF EN 1213:2000 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
  • NF EN 16736:2015 Évaluation des risques sanitaires causés par les substances chimiques - Exigences relatives à la dispensation de formation
  • NF P98-871-1*NF EN 15466-1:2010 Primers for cold and hot applied joint sealants - Part 1 : determination of homogeneity
  • NF P98-871-2*NF EN 15466-2:2010 Primers for cold and hot applied joint sealants - Part 2 : determination of resistance against alkali

German Institute for Standardization, three-primer primer

  • DIN EN 13630-10:2005 Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cords; German version EN 13630-10:2005
  • DIN EN 13630-9:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 9: Determination of transmission of detonation from detonating cord to detonating cord; German version EN 13630-9:2004
  • DIN EN 13630-5:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 5: Determination of resistance to abrasion of detonating cords; German version EN 13630-5:2003
  • DIN EN 13630-1:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements; German version EN 13630-1:2003
  • DIN EN 13630-11:2002 Explosives for civil uses - Detonation cords and safety fuses - Part 11: Determination of velocity of detonation of detonating cords; German version EN 13630-11:2002
  • DIN EN 13630-8:2002 Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses; German version EN 13630-8:2002
  • DIN 4108 Bb.1:1982 Thermal insulation in buildings; indexes; list of subjects
  • DIN EN 13630-2:2002 Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses; German version EN 13630-2:2002
  • DIN EN 13630-6:2002 Explosives for civil uses - Detonating cords and safety fuses - Part 6: Determination of resistance to tension of detonating cords; German version EN 13630-6:2002
  • DIN EN 13630-7:2002 Explosives for civil uses - Detonating cords and safety fuses - Part 7: Determination of the reliability of initiation of detonating cords; German version EN 13630-7:2002
  • DIN EN 13630-4:2002 Explosives for civil uses - Detonating cords and safety fuses - Part 4: Determination of sensitiveness to impact of detonating cords; German version EN 13630-4:2002
  • DIN 58959 Bb.1:1997 Quality management in medical microbiology - Overview and index
  • DIN EN 13630-12:2002 Explosives for civil uses - Detonation cords and safety fuses - Part 12: Determination of burning duration of safety fuses; German version EN 13630-12:2002
  • DIN EN 13630-3:2002 Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords; German version EN 13630-3:2002
  • DIN EN 1860-3:2022 Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecues and grill applications - Requirements and test methods; German and English version prEN 1860-3:2022
  • DIN EN 13631-10:2004 Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation; German version EN 13631-10:2003
  • DIN CEN/TS 17700-3:2022-07 Plant biostimulants - Claims - Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant; German version CEN/TS 17700-3:2022
  • DIN EN 17700-3:2023 Plant biostimulants - Claims - Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant; German and English version prEN 17700-3:2023
  • DIN EN 17700-3:2023-04 Plant biostimulants - Claims - Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant; German and English version prEN 17700-3:2023 / Note: Date of issue 2023-03-17*Intended as replacement for DIN CEN/TS 17700-3 (2022-07).
  • DIN EN ISO 10722:2007 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007); English version of DIN EN ISO 10722:2007-08

Military Standards (MIL-STD), three-primer primer

International Organization for Standardization (ISO), three-primer primer

  • ISO 999:1975 Documentation; Index of a publication
  • ISO 10722:2007 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material
  • ISO 3005:1975 Title missing - Legacy paper document
  • ISO 3005:1978 Textiles; Determination of dimensional change of fabrics induced by free-steam
  • ISO 11992-1:2019 Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 1: Physical and data-link layers

SAE - SAE International, three-primer primer

Professional Standard - Commodity Inspection, three-primer primer

  • SN/T 3454-2012 Rules for risk analysis of introducing bio-control agents
  • SN/T 2118-2008 Guidelines for regulating exotic natural enemies and biological control agents
  • SN/T 1582-2005 Rules for the quarantine of exotic harmful organism and their control agents for import
  • SN/T 3393-2012 Rapid simultaneous screen method of five bio-terrorism bacteria at frontier port.Gene suspension array with multiple primers on genus level
  • SN/T 3567.2-2015 Detection method of crossing priming isothermal amplification.Part 2:Vibrio cholerae
  • SN/T 3567.4-2015 Detection method of crossing priming isothermal amplification.Part 4:Yellow fever virus
  • SN/T 3567.5-2015 Cross-primed isothermal amplification detection method part 5: Salmonella
  • SN/T 2773-2011 The rapid screening method for five kinds of bioterrorism pathogens at border ports belongs to the gene suspension chip method with universal primers
  • SN/T 3567.3-2015 Detection method of crossing priming isothermal amplification.Part 3:Escherichia coli O157:H7
  • SN/T 3567.6-2015 Detection method of crossing priming isothermal amplification.Part 6:Mycobacterium tuberculosis
  • SN/T 3567.1-2013 Detection method of crossing priming isothermal amplification.Part 1:General technical regulation

IN-BIS, three-primer primer

European Committee for Standardization (CEN), three-primer primer

  • EN 13630-7:2002 Explosives for civil use - Detonating cords and safety fuses - Part 7: Determination of the reliability of initiation of detonating cords
  • EN 674:1997 Glass in Building - Determination of Thermal Transmittance (U Value) - Guarded Hot Plate Method
  • EN 15241:2007 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings
  • FprCEN/TS 17700-3-2021 Plant biostimulants - Claims - Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant
  • EN 1860-3:2003 Appliances, solid fuels and firelighters for barbecuing - Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods Incorporates Amendment 1: February 2006
  • EN ISO 10722:2019 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
  • prEN 13630-1-2021 Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements
  • EN 13315:2002 Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, three-primer primer

  • GB/Z 34792-2017 Laboratory animal—Technical specification for breeds introducing
  • GB/T 23629-2009 General requirements for the introduction of plant pathogens
  • GB/Z 41287.2-2022 Optical fibre telecommunication cables for use in premises cabling—Part 2:Optical fibre cables for self-supporting aerial application
  • GB/Z 41287.1-2022 Optical fibre telecommunication cable for use in premises cabling—Part 1:Optical fibre cables for duct and directly buried application
  • GB/T 21575-2008 Dangerous goods.Test method of cap for extremely insensitive detonate substance (EIDS)
  • GB/T 21576-2008 Dangerous goods.Test method of gap for extremely insensitive detonate substance (EIDS)
  • GB/T 21577-2008 Dangerous goods.Test method of extremely insensitive detonate substance (EIDS)
  • GB/T 21625-2008 Dangerous goods.Bullet impact test method of extremely insensitive detonating substance
  • GB/T 21626-2008 Dangerous goods.External fire test method of extremely insensitive detonating substance
  • GB/T 21627-2008 Dangerous goods.Slow cook-off test of extremely insensitive detonating substance
  • GB/T 12798-1991 Axial lead cores made of magnetic oxides or iron powder
  • GB/T 12798-2012 Axial lead cores made of magnetic oxides or iron powder
  • GB/T 8631-2001 Textiles--Determination of dimensional changes of fabrics induced by cold-water immersion

Guangdong Provincial Standard of the People's Republic of China, three-primer primer

Korean Agency for Technology and Standards (KATS), three-primer primer

  • KS K 0553-2022 Test method for frosting due to yarn reversing of woven and knitted fabrics
  • KS B ISO 21244:2011 Agricultural equipment-Mechanical connections between towed and towing vehicles-Implement hitch rings and attachment to tractor drawbars
  • KS B ISO 21244:2016 Agricultural equipment-Mechanical connections between towed and towing vehicles-Implement hitch rings and attachment to tractor drawbars
  • KS K 0117-2006 Test method for skewness in fabric and garment twist resulting from automatic home laundering
  • KS K ISO 10722:2008 Geosynthetics-Index test procedure for the evaluation of mechanical damage under repeated loading-Damage caused by granular material
  • KS K ISO 3005:2011 Textiles − Determination of dimensional change of fabrics induced by free-steam
  • KS K ISO 3005:2022 Textiles — Determination of dimensional change of fabrics induced by free-steam
  • KS K ISO 3005:2017 Textiles − Determination of dimensional change of fabrics induced by free-steam
  • KS K ISO 7771:2019 Textiles — Determination of dimensional changes of fabrics induced by cold-water immersion
  • KS F 2589-2017 Standard test method for admixtures to inhibit chloride-induced corrosion of steel in concrete

Military Standard of the People's Republic of China-General Armament Department, three-primer primer

Lithuanian Standards Office , three-primer primer

  • LST EN 1860-3-2004/A1-2006 Appliances, solid fuels and firelighters for barbecuing - Firelighters for igniting solid fuels for use in barbecue - Requirements and test methods
  • LST EN 1860-3-2004 Appliances, solid fuels and firelighters for barbecuing - Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods
  • LST EN 15241-2007/AC-2011 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in buildings
  • LST EN 13630-1-2004 Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements

AENOR, three-primer primer

  • UNE-EN 1860-3:2004/A1:2006 Appliances, solid fuels and firelighters for barbecuing - Firelighters for igniting solid fuels for use in barbecue - Requirements and test methods
  • UNE-EN 1860-3:2004 Appliances, solid fuels and firelighters for barbecuing - Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods
  • UNE 28017-8:1961 TRACTION AND ELONGATION TESTS IN AIRCRAFT FABRICS.
  • UNE 20673:1983 AXIAL LEAD CORES MADE OF MAGNETIC OXIDES OR IRON POWDER
  • UNE-EN 13630-1:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements
  • UNE 40485:1986 TEXTILES. DETERMINATION OF DIMENSIONAL CHANGES OF FABRICS INDUCED BY COLD-WATER IMMERSION
  • UNE 56538:1978 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. DETERMINATION OF STRENGHT AGAINST PERPENDICULAR TRACTION TO FIBERS.

Professional Standard - Agriculture, three-primer primer

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, three-primer primer

Liaoning Provincial Standard of the People's Republic of China, three-primer primer

  • DB21/T 3337-2020 Technical regulations for the introduction of wild herbaceous plants
  • DB2102/T 0031-2021 Technical regulations for introduction and screening of garden plants

US-CFR-file, three-primer primer

  • CFR 50-23.9-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.9:Incorporation by reference.
  • CFR 50-23.18-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.18:What CITES documents are required to export Appendix-I wildlife?
  • CFR 50-23.19-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.19:What CITES documents are required to export Appendix-I plants?
  • CFR 50-23.56-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.56:How may I use a CITES specimen after import into the United States?
  • CFR 50-23.26-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.26:When is a U.S. or foreign CITES document valid?
  • CFR 50-23.27-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.27:What CITES documents do I present at the port?
  • CFR 50-23.23-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.23:What information is required on U.S. and foreign CITES documents?
  • CFR 50-23.53-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.53:What are the requirements for obtaining a retrospective CITES document?
  • CFR 50-23.55-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.55:How may I use a CITES specimen after import into the United States?
  • CFR 9-92.7-2013 Animals and Animal Products. Part92:Importation of animals and animal products: procedures for requesting recognition of regions. Section92.7:Incorporation by reference.
  • CFR 9-92.7-2014 Animals and Animal Products. Part92:Importation of animals and animal products: procedures for requesting recognition of regions. Section92.7:Incorporation by reference.
  • CFR 50-23.52-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.52:What are the requirements for replacing a lost, damaged, stolen, or accidentally destroyed CITES document?

AT-ON, three-primer primer

  • ONORM EN 45014 Beib.1-1990 General criteriafor suppliers declaration of conformily; trilingual index (de, en, fr) for ?NORMEN 45014
  • ONORM EN 45013 Beib.1-1990 General crileria for certi?calion bodies operaling certi?calion of personnel; Irilin-Xual index (de, en.fr)for ?NORM EN 45013
  • OENORM EN 13630-1-2021 Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements

Defense Logistics Agency, three-primer primer

CO-ICONTEC, three-primer primer

Danish Standards Foundation, three-primer primer

  • DS/EN 1860-3/A1:2006 Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecue - Requirements and test methods
  • DS/EN 1860-3:2004 Appliances, solid fuels and firelighters for barbecueing - Part 3: Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods
  • DS/EN 15241/AC:2011 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in buildings
  • DS/ISO/TR 5729:2021 Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes

RO-ASRO, three-primer primer

API - American Petroleum Institute, three-primer primer

GOSTR, three-primer primer

  • GOST R 57489-2017 Guidelines on diligent practice for selling goods by electronic shopping

Sichuan Provincial Standard of the People's Republic of China, three-primer primer

  • DB51/T 2685-2020 Porcine pseudorabies virus cross-primer constant temperature amplification (CPA) detection method

Hebei Provincial Standard of the People's Republic of China, three-primer primer

  • DB13/ 186-1993 Qualitative test method for sulfur and sulfide in potassium chlorate fuse

国家质量监督检验检疫总局, three-primer primer

  • SN/T 3567.11-2017 Cross-primer isothermal amplification detection method Part 11: Shigella
  • SN/T 3567.8-2017 Cross-primer isothermal amplification detection method Part 8: Plasmodium
  • SN/T 3567.7-2017 Cross-primed isothermal amplification detection method Part 7: Enterovirus 71
  • SN/T 3567.9-2017 Cross-primer isothermal amplification detection method Part 9: Yersinia pestis
  • SN/T 3567.10-2017 Cross-primer isothermal amplification detection method Part 10: Bacillus anthracis

(U.S.) Ford Automotive Standards, three-primer primer

Standard Association of Australia (SAA), three-primer primer

  • AS 1774.23.2:1999 Refractories and refractory materials - Physical test methods - Abradability index - Perpendicular method

RU-GOST R, three-primer primer

  • GOST 26966-1986 Water intake and outlet works and gates. Terms and definitions
  • GOST 7.78-1999 System of standards on information, librarianship and publishing. Publications. Indexes
  • GOST 32421-2013 Classification of chemicals which hazard is caused by physical and chemical properties. Test methods of explosives
  • GOST R 52616-2006 Live vaccine against anthrax of animals from strain 55-VNIIVV & M. Specifications

HU-MSZT, three-primer primer

GM North America, three-primer primer

Shandong Provincial Standard of the People's Republic of China, three-primer primer

  • DB37/T 3612-2019 Specifications for the construction of foreign plant seedling isolation field nurseries

Hunan Provincial Standard of the People's Republic of China, three-primer primer

  • DB43/T 707-2012 Standards for Quarantine and Isolation of Breeding Animals Imported from across Provinces

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, three-primer primer

American Society for Testing and Materials (ASTM), three-primer primer

  • ASTM C1827-20 Standard Test Method for Determination of the Air-Entraining Admixture Demand of a Cementitious Mixture
  • ASTM C1894-22 Standard Guide for Microbially Induced Corrosion of Concrete Products
  • ASTM D5970-96 Standard Practice for Deterioration of Geotextiles from Outdoor Exposure
  • ASTM F1011-86(1994)e1 Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel

Professional Standard - Electron, three-primer primer

International Electrotechnical Commission (IEC), three-primer primer

  • IEC 60701:1981 Axial lead cores made of magnetic oxides or iron powder

ES-UNE, three-primer primer

  • UNE-CEN/TS 17700-3:2022 Plant biostimulants - Claims - Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant (Endorsed by Asociación Española de Normalización in May of 2022.)

Xinjiang Provincial Standard of the People's Republic of China, three-primer primer

  • DB65/T 3004-2009 Technical specifications of incasive pest prevention in tree seed and seedling introducing

国家林业局, three-primer primer

  • LY/T 2519-2015 Technical regulations for the use of plant-derived attractants for cypress stem-boring pests

ESDU - Engineering Sciences Data Unit, three-primer primer

  • ESDU 91004 A-2014 Pitching moment derivative due to rate of pitch for projectiles at supersonic speeds

KR-KS, three-primer primer

  • KS K ISO 7771-2019 Textiles — Determination of dimensional changes of fabrics induced by cold-water immersion
  • KS K ISO 3005-2017 Textiles − Determination of dimensional change of fabrics induced by free-steam
  • KS K ISO 3005-2022 Textiles — Determination of dimensional change of fabrics induced by free-steam

Malaysia Standards, three-primer primer

GB-REG, three-primer primer

Professional Standard - Railway, three-primer primer

  • TB/T 2783-1997 Pollutant limits and test rules for diesel engines used in railway traction

农业农村部, three-primer primer

  • NY/T 3266-2018 Regulations for the management of isolation and quarantine sites for imported agricultural plant seedlings from abroad

Canadian General Standards Board (CGSB), three-primer primer

IT-UNI, three-primer primer





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved