ZH
RU
ES

Hesheng high and low temperature test chamber

Hesheng high and low temperature test chamber, Total:81 items.

In the international standard classification, Hesheng high and low temperature test chamber involves: Environmental testing, TESTING, Mechanical testing, Energy and heat transfer engineering in general, Wind turbine systems and other alternative sources of energy, Fibre optic communications, Railway rolling stock, Testing of metals, Kitchen equipment, Optics and optical measurements, Optical equipment, Reinforced plastics, On-board equipment and instruments, Aerospace electric equipment and systems, Rubber, Pipeline components and pipelines.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Hesheng high and low temperature test chamber

• GB/T 10592-2008 Specifications for low/high temperature test chambers
• GB/T 10592-1989 Specification for low/high temperature test chambers
• GB/T 10592-2023 High and low temperature test chamber technical conditions
• GB/T 10591-2006(英文版) Specifications for high temperature/low air pressure testing chambers
• GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
• GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
• GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
• GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
• GB/T 2424.1-2015 Environmental testing.Part 3:Supporting documentation and guidance.Cold and dry heat tests
• GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
• GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
• GB/T 12085.2-2022 Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
• GB/T 2424.22-1986 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
• GB/T 12085.16-1995 Optics and optical instruments--Environmental test methods--Combined bounce or steady state acceleration, in dry heat or cold
• GB/T 12085.2-2010 Optics and optical instruments.Enviromental test methods.Part 2:Cold,heat,humidity
• GB/T 12085.10-1989 Optics and optical instruments--Environmental test methods--Combined sinusoidal vibration,dry heat,cold
• GB/T 12085.10-2010 Optics and optical instruments.Environmental test methods.Part 10:Combined sinusoidal vibration and dry heat or cold
• GB/T 12085.21-2011 Optics and optical instruments.Enviromental test methods.Part 21: Combined low pressure and ambient temperature or dry heat
• GB/T 12085.15-1995 Optics and optical instruments--Environmental test methods--Combined random vibration wideband--Reproducibility medium, in dry heat or cold
• GB/T 12085.22-2022 Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
• GB/T 12085.16-2010 Optics and optical instruments.Environmental test methods.Part 16:Combined bounce or steady-state acceleration and dry heat or cold
• GB/T 12085.13-1989 Optics and optical instruments--Environmental test methods--Shock,bump or freefall,dry heat,cold
• GB/T 12085.13-2010 Optics and optical instruments.Environmental test methods.Part 13:Combined shock,bump or free fall and dry heat or cold
• GB/T 12085.15-2010 Optics and optical instruments.Environmental test methods.Part 15:Combined digitally controlled broad-band random vibration and dry heat or cold

工业和信息化部/国家能源局, Hesheng high and low temperature test chamber

• JB/T 13229-2017 High and low temperature environmental chamber for testing machine

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Hesheng high and low temperature test chamber

• GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
• GB/T 5565.3-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures

Liaoning Provincial Standard of the People's Republic of China, Hesheng high and low temperature test chamber

• DB21/T 2761-2017 High and low temperature test specification for wind power gearbox

American National Standards Institute （ANSI), Hesheng high and low temperature test chamber

• ANSI/TIA-455-37A-1993 Fiber Optic Cable Bend Test, Low and High Temperature
• ANSI/TIA/EIA 455-69-A-1991 Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers
• ANSI/EIA/TIA 455-69A:1991 Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers

(U.S.) Telecommunications Industries Association , Hesheng high and low temperature test chamber

• TIA-455-37-A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
• TIA-455-37-A-2000(2013) FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable

Professional Standard - Aviation Industry, Hesheng high and low temperature test chamber

• Q/HBm 109-1994 High temperature and low temperature test methods for auto parts

Korean Agency for Technology and Standards (KATS), Hesheng high and low temperature test chamber

• KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
• KS R 9213-2007 Railway rolling stock－High and low temperature test methods of parts
• KS M ISO 10619-3:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
• KS M ISO 10619-3-2014(2019) Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures

Professional Standard - Aviation, Hesheng high and low temperature test chamber

• HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles
• HB 7122.2-1994 Civil Aircraft Airborne Equipment Climatic Environment Test Chamber (Chamber) Verification Method Temperature and Altitude Test Chamber (Chamber)

RU-GOST R, Hesheng high and low temperature test chamber

• GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
• GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
• GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
• GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
• GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
• GOST 25.601-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures

CZ-CSN, Hesheng high and low temperature test chamber

• CSN 34 7010 Cast.68-1972 Low and high temperature endurance test of fibrous impregnated coverings
• CSN 34 7010 Cast.69-1972 Low and high temperature endurance test of fibrous impregnated coveringa

Japanese Industrial Standards Committee (JISC), Hesheng high and low temperature test chamber

• JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts

Association Francaise de Normalisation, Hesheng high and low temperature test chamber

• NF D38-311:1996 Household refrigerating appliances. Refrigerators with or without low-temperature compartment. Characteristics and test methods.
• NF EN 3745-405:2013 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 405 : essai de courbure aux températures basse/haute
• NF L52-400-405*NF EN 3745-405:2013 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: low/High temperature bend test
• NF EN ISO 10619-3:2012 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 3 : essais de courbure à des températures basses et élevées
• NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
• NF S98-040-3*NF EN ISO 15883-3:2009 Washer-disinfectors - Part 3 : requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers
• NF EN 2349-318:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 318 : tension de collage à haute température et de décollage à basse température
• NF L58-100-318*NF EN 2349-318:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 318 : pick-up voltage at high temperature and drop-out voltage at low temperature

(U.S.) Ford Automotive Standards, Hesheng high and low temperature test chamber

• FORD FLTM BB 101-11-2000 PHYSICAL, ELECTRICAL, HEAT AND COLD TESTING OF AUTOMOTIVE CABLE (Replaces FLTM BB 001-11)

未注明发布机构, Hesheng high and low temperature test chamber

• BS EN ISO 7371:1996(1999) Household refrigerating appliances — Refrigerators with or without low temperature compartment — Characteristicsandtest methods

International Organization for Standardization (ISO), Hesheng high and low temperature test chamber

• ISO/R 783:1968 Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
• ISO 7371:1995 Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods
• ISO 7371:1995/Amd 1:1997 Household refrigerating appliances — Refrigerators with or without low-temperature compartment — Characteristics and test methods — Amendment 1: for the preservation of highly perishable foodstuffs
• ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures

Lithuanian Standards Office , Hesheng high and low temperature test chamber

• LST EN 3745-405-2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
• LST EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
• LST EN 2349-318-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature

Danish Standards Foundation, Hesheng high and low temperature test chamber

• DS/EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
• DS/EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
• DS/EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature

British Standards Institution (BSI), Hesheng high and low temperature test chamber

• BS 903-A6:1992 Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures
• BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
• BS EN 3745-405:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Low/High temperature bend test
• BS EN 2349-318:2007 Aerospace series - Requirements and test procedures for relays and contactors - Pick-up voltage at high temperature and drop-out voltage at low temperature
• BS EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature

IN-BIS, Hesheng high and low temperature test chamber

• IS 4713-1968

European Committee for Standardization (CEN), Hesheng high and low temperature test chamber

• EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
• EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature
• EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)

Professional Standard - Electron, Hesheng high and low temperature test chamber

• SJ/Z 9001.44-1987 Basic environmental testing procedures--Part 3: Background information--Section One:Cold and dry heat tests

German Institute for Standardization, Hesheng high and low temperature test chamber

• DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011
• DIN EN 2349-318:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature; German and English version EN 2349-318:2006

Others:   Hesheng high and low temperature test chamber, Constant temperature and humidity test chamber Hesheng, Hesheng constant temperature and humidity test chamber.