ZH
RU
ES

Gas Calibration Box

Gas Calibration Box, Total:500 items.

In the international standard classification, Gas Calibration Box involves: Analytical chemistry, Air quality, Fluid storage devices, Nuclear energy engineering, Products of the chemical industry, Measurement of volume, mass, density, viscosity, Metrology and measurement in general, Thermodynamics and temperature measurements, Electricity. Magnetism. Electrical and magnetic measurements, Measurement of fluid flow, Equipment for petroleum and natural gas industries, Valves, Non-destructive testing, Alarm and warning systems, Diagnostic, maintenance and test equipment, Energy and heat transfer engineering in general, Corrosion of metals, Refrigerating technology, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Natural gas, Kitchen equipment, Electrical equipment for working in special conditions, Electrical accessories, Electronic components in general, Heat recovery. Thermal insulation, Protection of and in buildings, Freight distribution of goods, Road engineering, Installations in buildings, Wood-based panels, Geology. Meteorology. Hydrology, Terminology (principles and coordination).

Association Francaise de Normalisation, Gas Calibration Box

NF X20-201:2006 Gas analysis - Requirements for certificates for calibration gases and gas mixtures.
NF X20-103*NF EN ISO 16664:2017 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
NF X20-201*NF EN ISO 6141:2015 Gas analysis - Contents of certificates for calibration gas mixtures
NF EN ISO 6141:2015 Analyse des gaz - Prescriptions relatives aux certificats des mélanges de gaz pour étalonnage
NF X20-201:1979 Gas analysis. Calibration gas mixtures. Certificate of mixture preparation.
NF EN ISO 16664:2017 Analyse des gaz - Mise en oeuvre des gaz et des mélanges de gaz pour étalonnage - Lignes directrices
NF X20-202:1979 Gas analysis. Preparation of calibration gas mixtures. Gravimetric methods.
NF X20-208:1979 GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. SATURATION METHOD.
NF X20-209:1979 Gas analysis. Preparation of calibration gas mixtures. Permeation method.
NF X20-205-5*NF EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5 : capillary calibration devices
NF X20-203*NF EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method.
NF X20-206:1979 GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. MANOMETRIC METHOD.
NF X20-207:1982 Gas analysis. Determination of composition of calibration gas mixtures. Comparison methods.
NF X20-211:1983 Gas analysis. Preparation of calibration gas mixtures. Mass dynamic method.
NF EN ISO 6145-5:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 5 : dispositifs d'étalonnage par capillaires
NF X20-220:1981 Analysis of gases. Checking of calibration gas mixtures by a comparison method.
NF EN ISO 6144:2006 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage - Méthode volumétrique statique
NF X20-542-1*NF EN ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1 : gravimetric method for class I mixtures
NF A09-461:2002 Non-destructive testing - Leak test - Calibration of gaseous reference leaks.
NF M08-005:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks.
NF X20-103:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines.
NF EN ISO 20486:2018 Essais non destructifs - Contrôle d'étanchéité - Étalonnage des fuites de référence des gaz
NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
NF X20-106*NF ISO 14167:2019 Gas analysis - General quality aspects and metrological traceability of calibration gas mixtures
NF EN ISO 6143:2006 Analyse des gaz - Méthodes comparatives pour la détermination et la vérification de la composition des mélanges de gaz pour étalonnage
NF X20-205-9*NF EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9 : saturation method
NF A09-461*NF EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
NF X20-205-8*NF EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8 : diffusion method.
NF X20-212:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 1 : methods of calibration.
NF X20-205-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6 : critical orifices.
NF X43-055:2007 Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Sampling of ambient air and implementation of calibration gases.
NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.
NF X20-205-6*NF EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6 : critical flow orifices
NF X20-105*NF ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
NF ISO 12963:2017 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage
NF EN ISO 6145-8:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 8 : méthode par diffusion
NF EN ISO 6145-9:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 9 : méthode par saturation
NF ISO 14167:2019 Analyse des gaz - Aspects généraux sur la qualité et traçabilité métrologique des mélanges de gaz pour étalonnage
NF EN ISO 6145-10:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 10 : méthode par perméation
NF EN ISO 6142-1:2015 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage - Partie 1 : méthode gravimétrique pour les mélanges de Classe I
NF EN ISO 6145-1:2019 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 1 : aspects généraux
NF A84-440:2009 Equipement for gas welding and allied processes - Pressure reduction station for compressed liquefied gas - Equipment - Setting up - Checking
NF X43-055:2017 Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Sampling of ambient air and implementation of calibration gases
NF EN ISO 6145-11:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 11 : génération électrochimique
NF EN ISO 6145-4:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 4 : méthode continue par seringue d'injection

Association of German Mechanical Engineers, Gas Calibration Box

VDI 3490 Blatt 12-1988 Measurement of gases; calibration gas mixtures; preparation of calibration gas mixtures by manometric methods
VDI 3490 Blatt 13-1992 Measurement of gases; calibration gas mixtures; preparation of calibration gas mixtures by saturation methods
VDI 3490 Blatt 10-1981 Measurement of gases; calibration gas mixtures; preparation of calibration gas mixtures using capillary device
VDI 3490 Blatt 14-1994 Measurement of gases - Calibration gas mixtures - Preparation of calibration gas mixtures by volumetric static method using glass vessels
VDI 3490 Blatt 3-1980 Measurement of gases; specifications for transfer of calibration gas mixtures
VDI 3490 Blatt 2-1980 Measurement of gases; calibration gas mixtures; preparation methods; general
VDI 3490 Blatt 11-1980 Measurement of gases; preparation of calibration gas mixtures using plastic bags
VDI 3490 Blatt 8-1981 Measurement of gases; calibration gas mixtures; preparation by continuous injection method
VDI 3490 Blatt 6-1988 Measurement of gases; calibration gas mixtures; dynamic; preparation by gas-mixing pumps
VDI 3490 Blatt 9-1980 Measurement of gases; preparation of calibration gas mixtures by permeation procedures
VDI 3490 Blatt 5-1980 Measurement of gases; determination of the composition of calibration gas mixtures by comparison methods
VDI 3490 Blatt 7-1980 Measurement of gases; calibration gas mixtures; dynamic method of preparation by periodic injection
VDI 3490 Blatt 4-1980 Measurement of gases; preparation of calibration gas mixtures by gravimetric methods
VDI 3490 Blatt 16-1994 Measurement of gases - Calibration gas mixtures - Dynamic preparation with critical orifice systems
VDI 2468 Blatt 10-1995 Gaseous air pollution measurement - Preparation of hydrogen peroxide calibration - Gas mixtures
VDI 2100 Blatt 4-2015 Gaseous ambient air measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Methods of preparing calibration gases and calibration solutions
VDI 3490 Blatt 17-1998 Measurement of gases - Calibration gas mixtures - Dynamic preparation with thermal mass flow controllers
VDI 2468 Blatt 8-2006 Ambient air measurement - Measurement of peroxyacetyl nitrate (PAN) - Preparation of PAN calibration gas

British Standards Institution (BSI), Gas Calibration Box

BS EN ISO 6145-1:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
BS EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibration
BS EN ISO 16664:2004 Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
BS EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
BS EN ISO 6141:2015 Gas analysis. Contents of certificates for calibration gas mixtures
BS EN ISO 6141:2000 Gas analysis. Requirements for certificates for calibration gases and gas mixtures
BS EN ISO 6141:2015+A1:2020 Gas analysis. Contents of certificates for calibration gas mixtures
BS EN ISO 6145-5:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
BS EN ISO 6141:2006 Gas analysis - Requirements for certificates for calibration gases and gas mixtures
BS EN ISO 6142:2001 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
BS EN ISO 6142:2006 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
BS EN ISO 16664:2017 Tracked Changes. Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
BS ISO 3455:2007 Hydrometry. Calibration of current-meters in straight open tanks
BS ISO 3455:2021 Hydrometry. Calibration of current-meters in straight open tanks
BS EN ISO 6144:2003 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
BS EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
BS EN ISO 6145-10:2002 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method
BS EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method
BS EN ISO 6145-6:2003 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices
BS EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Critical orifices
BS ISO 6145-2:2014 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Piston pumps
BS EN ISO 20486:2018 Non-destructive testing. Leak testing. Calibration of reference leaks for gases
BS EN ISO 6145-8:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Diffusion method
BS EN ISO 6143:2001 Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
BS EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Diffusion method
BS EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
BS EN ISO 6145-1:2019 Gas analysis. Preparation of calibration gas mixtures using dynamic methods - General aspects
BS EN ISO 6145-11:2006 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Electrochemical generation
BS EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11:Electrochemical generation
BS ISO 6142-1:2015+A1:2020 Gas analysis. Preparation of calibration gas mixtures - Gravimetric method for Class I mixtures
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
BS ISO 14167:2018 Gas analysis. General quality aspects and metrological traceability of calibration gas mixtures
BS EN ISO 6145-4:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Continuous syringe injection method
BS EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Continuous syringe injection method
BS ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers
BS ISO 12963:2017 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS EN ISO 6145-7:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
BS ISO 12963:2017+A1:2020 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS EN ISO 6142-1:2015 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures. Gravimetric method for Class I mixtures
BS 4559-4:2000 Methods for preparation of calibration gas mixtures - Certificate of mixture preparation
20/30354937 DC BS ISO 3455. Hydrometry. Calibration of current-meters in straight open tanks
20/30419851 DC BS ISO 12963 AMD1. Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS EN ISO 6145-7:2018 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
22/30439290 DC BS ISO 6142-2. Gas analysis. Preparation of calibration gas mixtures - Part 2. Gravimetric method for Class II mixtures
BS ISO 4269:2001 Petroleum and liquid petroleum products - Tank calibration by liquid measurement - Incremental method using volumetric meters
BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas Calibration Box

GB/T 5275.1-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 1:Methods of calibration
GB/T 5275.5-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 5:Capillary calibration devices
GB/T 38527-2020 Technologic rules for calibration gas mixtures
GB/T 10628-2008 Gas analysis.Comparison methods for determining and checking the composition of calibration gas mixtures
GB/T 5274-1985 Gas analysis--Preparation of calibration gas mixtures--Weighing methods
GB/T 5275-2005 Gas analysis-Preparation of calibration gas mixtures-Permeation method
GB/T 14070-1993 Gas analysis.Preparation of calibration gas mixtures.Manometric method
GB/T 5274-2008 Gas analysis.Preparation of calibration gas mixtures.Gravimetric method
GB/T 5275-1985 Gas analysis--Preparation of calibration gas mixtures--Permeation methods
GB/T 10248-1988 Gas analysis--Preparation of calibration gas mixtures--Static volumetric methods
GB/T 10248-2005 Gas analysis.Preparation of calibration gas mixtures.Static volumetric methods
GB/T 5275.10-2009 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 10:Permeation method
GB/T 5275.2-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 2:Volumetric pumps
GB/T 5275.8-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 8:Diffusion method
GB/T 5275.9-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 9:Saturation method
GB/T 5275.2-2022 Gas analysis—Preparation of calibration gas mixtures using dynamic methods—Part 2: Piston pumps
GB/T 5275.6-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 6:Gritical orifices
GB/T 5275.4-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 4:Continuous syringe injection method
GB/T 5275.6-2023 Preparation of gas mixtures for calibration by dynamic method of gas analysis - Part 6: Critical flow orifice
GB/T 5275.11-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 11:Electrochemical generation
GB/T 5275.7-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 7:Thermal mass-flow controllers
GB/T 13282-1991 Flow measurement calibration facility--Pipe prover

National Metrological Technical Specifications of the People's Republic of China, Gas Calibration Box

JJF(纺织) 055-2012 Calibration Specification for Standard Light Sources Boxes
JJF(纺织)055-2012 Calibration Specification for Standard Light Sources Boxes
JJF(纺织) 055-2006 Standard Light Box Calibration Specifications
JJF(纺织)055-2023 Calibration Specification for Standard Color Assessment Cabinets
JJF(纺织) 011-2010 Calibration Specification for Eight-Basket Oven
JJF(纺织)011-2010 Calibration Specification for Eight-Basket Oven
JJF 1564-2016 Calibration Specifications for Temperature and Humidity Standard Box
JJF 1260-2010 Calibration Specification for Baby Incubator
JJF 1376-2012 Calibration Specification for Box-type Resistance Furnace
JJF 1636-2017 Calibration Specification for A.C.Resistance Boxes
JJF(纺织) 060-2010 Calibration Specification for Constant Temperature Humidity Chambers
JJF(纺织)060-2010 Calibration Specification for Constant Temperature Humidity Chambers
JJF 1357-2012 Calibration Specification for Wet Gas Meters
JJF 1264-2010 Calibration Specification for Burden Box of Instrument Transformers
JJF 1674-2017 Calibration Specification for Alarmer Detectors of Benzene
JJF(纺织) 059-2010 Calibration Specification for Ventilated Textile Oven
JJF(纺织)059-2010 Calibration Specification for Ventilated Textile Oven
JJF 2051-2023 Calibration Specification for Ozone Aging Test Chambers
JJF(纺织) 053-2013 Calibration Specification for Fuzzing and Pilling Tester
JJF(纺织)053-2013 Calibration Specification for Fuzzing and Pilling Tester
JJF(纺织) 053-2006 Calibration specification for rolling box pilling tester
JJF(机械) 037-2008 Voltage Transformer Load Bank Calibration Specifications
JJF(机械) 038-2008 Current Transformer Load Bank Calibration Specifications
JJF 1257-2010 Calibration Guideline of the Temperature Block Calibrators
JJF 1907-2021 Calibration Specification for Ambient Air online Monitoring Instruments
JJF 1158-2006 Calibration Specification for Stable Isotope Gas Mass Spectrometer
JJF 1888-2020 Calibration Specification for Hydrogen Chloride Gas Detectors and Alarms
JJF(京) 53-2018 Calibration specification for gas flowmeter volume corrector
JJF(机械) 1023-2019 Calibration Specifications for Gas Relays (Buchholz Relays)
JJF 1979-2022 Calibration specifications for radioactive noble gas monitors
JJF(京)53-2018 Calibration specification for gas flowmeter volume corrector
JJF(机械)1023-2019 Calibration Specifications for Gas Relays (Buchholz Relays)
JJF 2062-2023 Calibration Specification for Ultraviolet Test Chambers of Photovoltaic Modules
JJF 1676-2017 Calibration Specification for Temperature Parameter of Passive Medical Cold Boxes
JJF 1994-2022 Calibration Specification for Refrigerator Performance Measuring Apparatuses
JJF(机械) 1006-2018 Calibration specification for refrigerator performance comprehensive test device
JJF(机械) 067-2009 Calibration specification for refrigerator performance comprehensive test device
JJF 1892-2021 Calibration Specification for Insufflators
JJF 1894-2021 Calibration Specification for Calibrators of Semiconductor Curve Tracers
JJF 1328-2011 Calibration Specification for Pressure Regulators with Bourdon Tube Pressure Gauge
JJF(建材)129-2018 Calibration Specification for Constant Temperature and Humidity Chambers for Safety Glass
JJF(建材) 129-2018 Calibration specification for constant temperature and humidity chamber for safety glass testing
JJF 1954-2021 Calibration Specification for Volume Sound Sources
JJF 1240-2010 Calibration Specification for Gas Flow Calibration Facility by Means of Critical Flow Venturi Nozzles
JJF(纺织) 091-2020 Calibration Specification of Tester for Down-proof Properties of Fabrics(Tumble Test)
JJF(纺织)091-2020 Calibration Specification of Tester for Down-proof Properties of Fabrics(Tumble Test)
JJF 1358-2012 Calibration Specification for DN1000～DN15 000 Liquid Ultrasonic Flowmeters Calibration by Non Practical Flow Method
JJF 1202-2008 Calibration Specification for Electret Microphones
JJF 1800-2020 Calibration Specification for Aerosol Photometers
JJF(冀)207-2023 Calibration specification for natural gas calorific value meter
JJF(纺织)037-2023 Calibration Specification for Fabrics Air Permeability Testers
JJF 1480-2014 Calibration Specification for Liquid-scintillation Counting System
JJF 1080-2002 Calibration Specification for Blackbody Radiators in (-50～+90)℃
JJF 1226-2009 Calibration Specification of the Clinical Electronic Thermometer
JJF 1556-2016 Calibration specification for ultrasonic tissue imitation phantom
JJF(石化) 011-2018 Calibration Specification for Conveyor Belt Flammability and Flame Propagation Characteristics Test Chambers
JJF(石化)011-2018 Calibration Specification for Conveyor Belt Flammability and Flame Propagation Characteristics Test Chambers
JJF 1504-2015 Calibration Specification for Air Ultrasound Measuring Instruments
JJF 1433-2013 Calibration Specification for Chlorine Alarm Detectors
JJF 1948-2021 Calibration Specification for Gasoline Vapor Recovery Detectors
JJF 1987-2022 Air Data Meter Calibration Specifications
JJF(纺织) 051-2006 Calibration specification for insolation and climate tester
JJF 1268-2010 Calibration Specification for Medical Diagnostical X-ray Radiation Source for Computer Tomography(CT) Phantom
JJF 1412-2013 Calibration Specification for Clinical Color Change Thermometers
JJF 1927-2021 Calibration Specification for Phantoms Used in Computed Radiography (CR) and Digital Radiography (DR)

Professional Standard - Machinery, Gas Calibration Box

JB/T 6853-1993 Calibration mixed gas cylinder color code
JB/T 8626-1997 Preparation method of mixed gas product model for calibration
JB/T 4781-2005 Tank containers for liquefied gases
JB/T 4781-2005（标准释义） Tank container for liquid gas
JB 6852-1993 Vehicle emission analyzer - Requirements for mixed gas storage vessel for calibration
JB/T 11188-2011 Power distribution boxes for explosive gas atmospheres

Korean Agency for Technology and Standards (KATS), Gas Calibration Box

KS A ISO 18213-2-2012(2022) Nuclear fuel technology－Tank calibration and volume determination for nuclear materials accountancy－Part 2：Data standardization for tank calibration
KS I ISO 6141-2015(2020) Gas analysis－Requirements for certificates for calibration gases and gas mixtures
KS I ISO 16664-2015(2020) Gas analysis－Handling of calibration gases and gas mixtures－Guidelines
KS I ISO 6145-1-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 6142-2015(2020) Gas analysis－Preparation of calibration gas mixtures－Gravimetric method
KS I 2219-2015 General rules for calibration method of gas analyzer
KS I ISO 6145-5-2015(2020) Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS I ISO 6144-2015(2020) Gas analysis－Preparation of calibration gas mixtures－Static volumetric method
KS I ISO 6145-5:2010 Gas analysis-Preparation of calibraion gas mixtures using dynamic volumetric methods-Part 5:Capillary calibration devices
KS I ISO 6145-5:2015 Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS I 2219-2015(2020) General rules for calibration method of gas analyzer
KS I ISO TS 14167:2015 Gas analysis－General quality assurance aspects in the use of calibration gas mixtures－Guidelines
KS I ISO 6143-2015(2020) Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
KS M ISO 8222:2003 Petroleum measurement systems-Calibration-Temperature corrections for use when calibrating volumetric proving tanks
KS M ISO 8222:2013 Petroleum measurement systems－Calibration－Temperature corrections for use when calibrating volumetric proving tanks
KS I ISO 16664:2010 Gas analysis-Handling of calibration gases and gas mixtures-Guidelines
KS I ISO 16664:2015 Gas analysis－Handling of calibration gases and gas mixtures－Guidelines
KS I ISO 14167:2010 Gas analysis-General quality assurance aspects in the use of calibration gas mixtures-Guidelines
KS I ISO TS 14167-2015(2020) Gas analysis－General quality assurance aspects in the use of calibration gas mixtures－Guidelines
KS I ISO 6145-6-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO 6145-10:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS I ISO 6145-6:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 6:Sonic orifices
KS I ISO 6145-6:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO TR 12148-2011(2016) Natural gas－Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
KS I ISO 6145-11-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 11：Electrochemical generation
KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS I 2219-2009 General rules for calibration method of gas analyzer
KS F 2277-2017 Thermal insulation－Determination of steady－state thermal transmission properties－Calibrated and guarded hot box
KS I ISO TR 12148:2011 Natural gas－Calibration of chilled mirror type instruments for hydrocarbon dewpoint(liquid formation)
KS A 1721-1997 TANK CONTAINERS FOR LIQUIDS AND GASES FOR INTERNATIONAL TRADE
KS A 1721-1995 TANK CONTAINERS FOR LIQUIDS AND GASES FOR INTERNATIONAL TRADE
KS I ISO 6145-4-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 4：Continuous syringe injection method
KS F 2277-2017(2022) Thermal insulation－Determination of steady－state thermal transmission properties－Calibrated and guarded hot box
KS M ISO 4269:2003 Petroleum and liquid petroleum products-Tank calibration by liquid measurement-Incremental method using volumetric meters
KS M ISO 4269:2014 Petroleum and liquid petroleum products — Tank calibration by liquid measurement — Incremental method using volumetric meters

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gas Calibration Box

GB/T 35860-2018 Gas analysis—Contents of certificates for calibration gas mixtures
GB/T 35861-2018 Gas analysis—General quality assurance aspects in the use of calibration gas mixtures—Guidelines

European Committee for Standardization (CEN), Gas Calibration Box

EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
EN ISO 6141:2006 Gas analysis - Requirements for certificates for calibration gases and gas mixtures
EN ISO 6142:2006 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
EN ISO 6145-5:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
EN 13192:2001 Non destructive testing - Leak testing - Calibration of reference leaks for gases
EN ISO 6141:2015/A1:2020 Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)
EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
EN ISO 16664:2017 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
EN ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)

German Institute for Standardization, Gas Calibration Box

DIN EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003); English version of DIN EN ISO 6145-1:2008-11
DIN EN ISO 16664:2017-09 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017); German version EN ISO 16664:2017
DIN EN ISO 6141:2020-05 Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015 + Amd. 1:2020); German version EN ISO 6141:2015 + A1:2020
DIN 6146:2018 Gas analysis - Preparation of calibration gas mixtures - Manometric method
DIN 6146:2018-10 Gas analysis - Preparation of calibration gas mixtures - Manometric method
DIN EN ISO 8222:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002); German version EN ISO 8222:2002
DIN EN ISO 6145-5:2011-03 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009); German version EN ISO 6145-5:2010
DIN EN ISO 6144:2006-11 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003); German version EN ISO 6144:2006
DIN EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003); English version of DIN EN ISO 6144:2006-11
DIN EN ISO 6143:2006-11 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006
DIN EN ISO 16664:2017 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017); German version EN ISO 16664:2017
DIN EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2004); English version of DIN EN ISO 16664:2008-11
DIN EN ISO 20486:2018-05 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017); German version EN ISO 20486:2018
DIN 51898-1:2014 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM
DIN 51898-1:2014-05 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM / Note: CD-ROM enclosed
DIN 51898-2:2017-10 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures
DIN EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003); English version of DIN EN ISO 6145-6:2008-11
DIN EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); English version of DIN EN ISO 6145-8:2008-11
DIN EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); English version of DIN EN ISO 6145-10:2008-11
DIN EN ISO 6145-1:2020-02 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019); German version EN ISO 6145-1:2019
DIN EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009); German version EN ISO 6145-5:2010
DIN EN ISO 6141:2020 Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015 + Amd. 1:2020) (includes Amendment :2020)
DIN EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005); English version of DIN EN ISO 6145-11:2008-11
DIN EN ISO 6142-1:2015-12 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015); German version EN ISO 6142-1:2015
DIN EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
DIN EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004); English version of DIN EN ISO 6145-4:2008-11
DIN 3585:1990 Gas pipelines; size 5 valve box
DIN 3582:1990 Gas pipelines; size 2 valve box
DIN 3584:1990 Gas pipelines; size 4 valve box
DIN 3581:1990 Gas pipelines; size 1 valve box
DIN 3583:1990 Gas pipelines; size 3 valve box
DIN EN 13192:2002 Non-destructive testing - Leak test - Calibration of gaseous reference leaks; German version EN 13192:2001
DIN EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
DIN EN ISO 6145-10:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); German version EN ISO 6145-10:2008
DIN EN ISO 6145-9:2011-03 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009); German version EN ISO 6145-9:2010
DIN EN ISO 6145-8:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); German version EN ISO 6145-8:2008
DIN EN 14277:2006-11 Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes; German version EN 14277:2006
DIN EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
DIN EN ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015); German version EN ISO 6142-1:2015
DIN EN ISO 6145-6:2017-12 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017); German version EN ISO 6145-6:2017
DIN EN ISO 6145-11:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005); German version EN ISO 6145-11:2008

RU-GOST R, Gas Calibration Box

GOST R ISO 6142-2008 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
GOST R ISO 6144-2008 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method

Danish Standards Foundation, Gas Calibration Box

DS/EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
DS/EN ISO 6141:2006 Gas analysis - Requirements for certificates for calibration gases and gas mixtures
DS/EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
DS/EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
DS/EN ISO 6142:2007 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
DS/EN ISO 6144:2006 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
DS/EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
DS/EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
DS/EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
DS/EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
DS/EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
DS/EN 13192:2002 Non destructive testing - Leak testing - Calibration of reference leaks for gases
DS/EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method
DS/EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
DS/EN ISO 8990:1997 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box

ES-UNE, Gas Calibration Box

UNE-EN ISO 16664:2018 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017)
UNE-EN ISO 6141:2015 Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015)
UNE-EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
UNE-EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
UNE-EN ISO 6145-6:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
UNE-EN ISO 6142-1:2016 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)

American Society for Testing and Materials (ASTM), Gas Calibration Box

ASTM E908-98(2004) Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E908-98 Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E908-98(2022) Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E908-98(2018) Standard Practice for Calibrating Gaseous Reference Leaks
ASTM E908-98(2012) Standard Practice for Calibrating Gaseous Reference Leaks
ASTM B810-01a(2017) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM D633-11 Standard Volume Correction Table for Road Tar

GOSTR, Gas Calibration Box

GOST R 59144-2020 Methods for calibration of ships tanks

Group Standards of the People's Republic of China, Gas Calibration Box

T/SBX 076-2023 Specifications for Calibration of Vacuum Drying Ovens
T/SBX 082-2023 Refrigerator thermometer calibration specifications
T/CMA 037-2021 Calibration method for methanol alarm detectors
T/SBX 083-2023 Hydrogen fluoride gas detection alarm calibration specifications
T/QYSJLXH 002-2019 Calibration specification for temperature parameters of blood refrigerator
T/CMA 036-2021 Calibration method for ethylene oxide alarm detectors
T/YSG 001-2022 Specifications for Field Calibration of Combustible Gas Detection and Alarms
T/CAMS 92-2022 Sealed box gas purifier
T/CEC 414-2020 On-site calibration specification for pressure type sulfur hexafluoride gas density controller
T/SMA 0010-2020 SF6 Gas Density Relay Field Calibration Regulations

CZ-CSN, Gas Calibration Box

CSN 38 5551-1987 Gaseous fuels. Certificate of calibration gas mixture
CSN ISO 6349:1993 Gas analysis. Preparation of calibration gas mixtures. Permeation method
CSN 38 5567-1984 Natural gas. Preparation of calibration gas mixture containing methanol
CSN ON 25 2713-1966
CSN ON 25 2714-1966
CSN 99 6423-1988 Vertical cylindrical tanks. Calibration by geometrical methods. Verification
CSN 38 5552-1987 Gaseous fuels Determination of composition of calibration gas mixture by comparison method
CSN 38 5570-1986 Natural gas. Preparation of calibration gas mixture by manometric method
CSN ISO 6145-1:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods
CSN 38 5553-1988 Checking of calibration gas mixture proportion by a comparative method
CSN 39 5305-2006 Calibration of mechanic-electric (piezo) transducers for measurement of gunpowder gas pressure
CSN 26 9355-1983 Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids and gases

Professional Standard - Coal, Gas Calibration Box

MT 423-1995 Methane Calibration Gas Specifications in Air
MT/T 423-1995

YU-JUS, Gas Calibration Box

JUS H.F8.404-1990 Gas analysis. Preparat ion of calibration gas mixtures. Meighing methods
JUS H.F8.401-1990 Gas analysis. Preparation of calibration gas mixtures. Pnrmeaticm metbod
JUS H.F8.403-1990 Gas analysis. Preparat ion of callbration gas mixtures. Manometric method
JUS H.F8.400-1990 Gas analysis. Calibration gas mirtures. Certificate of mixture preparat ion
JUS H.F8.402-1990 Gas analysis. Deteralnation of composition of calibration gas mixtures. Comparlstm methods
JUS M.C5.002-2001 Bodies of valves - Calculation

International Organization for Standardization (ISO), Gas Calibration Box

ISO 6146:1979 Gas analysis — Preparation of calibration gas mixtures — Manometric method
ISO 6349:1979 Gas analysis — Preparation of calibration gas mixtures — Permeation method
ISO 6711:1981 Gas analysis — Checking of calibration gas mixtures by a comparison method
ISO 3455:2007 Hydrometry - Calibration of current-meters in straight open tanks
ISO 3455:2021 Hydrometry - Calibration of current-meters in straight open tanks
ISO 6141:1984 Gas analysis — Calibration gas mixtures — Certificate of mixture preparation
ISO 6141:1979 Gas analysis — Calibration gas mixtures — Certificate of mixture preparation
ISO 6145-5:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 7395:1984 Gas analysis — Preparation of calibration gas mixtures — Mass dynamic method
ISO 6142:1981/Add 1:1983 Gas analysis — Preparation of calibration gas mixtures — Weighing methods — Addendum 1
ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
ISO/CD 6143 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO/DIS 6143:2023 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
ISO 16664:2004 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
ISO 16664:2017 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
ISO/TS 14167:2003 Gas analysis - General quality assurance aspects in the use of calibration gas mixtures - Guidelines
ISO 6145-2:2014 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 2: Piston pumps
ISO 20486:2017 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
ISO 6145-6:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
ISO 6142:1981 Gas analysis; Preparation of calibration gas mixtures; Weighing methods
ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
ISO/DIS 6142-2 Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
ISO 6145-1:2019 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11: Electrochemical generation
ISO 6145-3:1986 Gas analysis — Preparation of calibration gas mixtures — Dynamic volumetric methods — Part 3: Periodic injections into a flowing gas stream
ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO/FDIS 6142-2:2023 Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
ISO 6142-2:2023 Gas analysis — Preparation of calibration gas mixtures — Part 2: Gravimetric method for Class II mixtures
ISO 6145-7:2018 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
ISO 6145-5:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 8990:1994 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box
ISO/TR 12148:2009 Natural gas - Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)
ISO 14167:2018 Gas analysis — General quality aspects and metrological traceability of calibration gas mixtures
ISO 12963:2017/Amd 1:2020 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - Amendment 1: Correction to Formula 5
ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
ISO 8222:2020 Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials)

Compressed Gas Association (U.S.), Gas Calibration Box

CGA M-8-2011 Guideline for the manufacturer of calibration gas standards used to analyze medical gases

国家市场监督管理总局、中国国家标准化管理委员会, Gas Calibration Box

GB/T 37180-2018 Gas analysis—Handling of calibration gases and gas mixtures—Guidelines
GB/T 5274.1-2018 Gas analysis—Preparation of calibration gas mixtures—Part 1:Gravimetric method for class I mixtures
GB/T 40336-2021 Non-destructive testing—Leak testing—Calibration of reference leaks for gases
GB/T 38677-2020 Gas analysis—Measurement procedure and result—Technical requirements for calibration

Lithuanian Standards Office , Gas Calibration Box

LST EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
LST EN ISO 6141:2007 Gas analysis - Requirements for certificates for calibration gases and gas mixtures (ISO 6141:2000)
LST EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2004)
LST EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
LST EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
LST EN ISO 6142:2007 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method (ISO 6142:2001)
LST EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
LST EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
LST EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
LST EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
LST EN 13192-2002 Non destructive testing - Leak testing - Calibration of reference leaks for gases
LST EN 13192-2002/AC-2004 Non destructive testing - Leak testing - Calibration of reference leaks for gases
LST EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
LST EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
LST EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
LST EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)

AENOR, Gas Calibration Box

UNE-EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
UNE-EN ISO 16664:2008 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2004)
UNE-EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
UNE-EN ISO 6144:2007 Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
UNE 77243-2:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 2: Volumetric pumps
UNE 49756-2:1974 TESTS OF CISTERN-CONTAINERS, SERIES 1 FOR GAS AND LIQUIDS
UNE-EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
UNE-EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
UNE-EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
UNE-EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
UNE-EN 13192:2002 Non destructive testing. Leak testing. Calibration of reference leaks for gases.
UNE-ISO/TS 14167:2007 EX Gas analysis -- General quality assurance aspects in the use of calibration gas mixtures - Guidelines (ISO/TS 14167:2003)
UNE-EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
UNE-EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
UNE-EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)

AR-IRAM, Gas Calibration Box

PL-PKN, Gas Calibration Box

PN C01300-1988 Gas analysis Preparation of calibration gas mixtures Weighing methods

未注明发布机构, Gas Calibration Box

BS EN ISO 6144:2006(2007) Gas analysis — Preparation of calibration gas mixtures — Static volumetric method
BS EN ISO 6143:2006(2007) Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
BS EN ISO 6145-8:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 8 : Diffusion method
BS EN ISO 6145-10:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10 : Permeation method
BS EN ISO 6145-11:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11 : Electrochemical generation
BS EN ISO 6145-4:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 4 : Continuous syringe injection method

Japanese Industrial Standards Committee (JISC), Gas Calibration Box

JIS B 7556:2008 Procedures of calibration and testing for gas flowmeter
JIS K 0055:1986 General rules for calibration method of gas analyzer
JIS K 0055:2002 General rules for calibration method of gas analyzer
JIS B 7556:2016 Calibration and proving test for gas flowmeter
JIS B 7556:2022 Calibration and proving test for gas flowmeter

BE-NBN, Gas Calibration Box

NBN T 97-109-1984 Gas analysis - Determination of composition of calibration gas mixtures -Comparison methods
NBN T 97-110-1983 Gas analysis - Preparation of calibration gas mixtures - Static volumetric methods
NBN T 97-102-1979 Preparation of calibration gas mixtures - Manometric method
NBN T 97-104-1979 Preparation of gas mixtures for calibratlon using permeation tubes
NBN T 97-107-1980 Preparation of calibration gas mixtures using plastic bags
NBN T 97-101-1979 Preparation of calibration gas mixtures - Weighing method

Professional Standard - Petroleum, Gas Calibration Box

SY/T 6810-2010 The calibration method of measuring instruments of core gas
SY 6810-2010 Calibration method of rock gas permeability tester
SY/T 6905-2012 Calibration method for liquid resistivity tools
SY 6905-2012 Liquid Resistivity Meter Calibration Method

NL-NEN, Gas Calibration Box

NEN 2042-1982 Air quality — Preparation of calibration gas mixtures by means of permeation tubes
NEN 2038-1979 Air quality - Calibration gas mixture of nitrogen monoxide in nitrogen - Gravimetric preparation

HU-MSZT, Gas Calibration Box

MSZ 15607-1975

Society of Automotive Engineers (SAE), Gas Calibration Box

SAE J2517-2000 Hybrid III Family Chest Potentiometer Calibration Procedure
SAE J2517-2010 Hybrid III Family Chest Potentiometer Calibration Procedure
SAE AIR1075-1984 BAROMETRY FOR ALTIMETER CALIBRATION
SAE AIR1075B-2020 Barometry for Altimeter Calibration

SAE - SAE International, Gas Calibration Box

SAE J2517-2006 Hybrid III Family Chest Potentiometer Calibration Procedure
SAE J2517-2016 Hybrid III Family Chest Potentiometer Calibration Procedure

KR-KS, Gas Calibration Box

KS I ISO 6145-10-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS A 5103-1993(2023) Standard liquids for calibrating viscometers

American National Standards Institute （ANSI), Gas Calibration Box

ANSI Z21.19 Addenda a-1992 Refrigerators Using Gas Fuel
ANSI Z21.19-2002 Refrigerators Using Gas Fuel

Professional Standard - Energy, Gas Calibration Box

NB/T 47057-2017 Liquefied gas tank container
NB/T 47059-2017 Tank containers for refrigerated liquefied gas
NB/T 20039.4-2013 Code on nuclear air and gas treatment Ventilation, air conditioning and air cleaning.Part 4: Housings

CEN - European Committee for Standardization, Gas Calibration Box

EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers

机械工业部, Gas Calibration Box

JB/T 6852-1993 Technical requirements for mixed gas storage containers for automotive exhaust analyzer calibration

Canadian Standards Association (CSA), Gas Calibration Box

CSA 1.4-2002-2002 Refrigerators Using Gas Fuel First Edition

API - American Petroleum Institute, Gas Calibration Box

API MPMS 11.2.3M-1984 Manual of Petroleum Measurement Standards Chapter 11.2.3M - Water Calibration of Volumetric Provers
API STD 2552-1966 USA STANDARD METHOD FOR MEASUREMENT AND CALIBRATION OF SPHERES AND SPHEROIDS
API STD 2555-1966 Method for Liquid Calibration of Tanks (First Edition)

Professional Standard - Aerospace, Gas Calibration Box

QJ 2873-1997 Method for calibrating pressure sensors and gauges with gaseous media

Military Standard of the People's Republic of China-General Armament Department, Gas Calibration Box

GJB 1668A-2020 Specification for balloons used for radar calibration
GJB 1668-1993 Specification for calibration balloons for radar

Professional Standard-Ships, Gas Calibration Box

CB 20005-2011 Specification for gas turbine enclosure of ships

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Gas Calibration Box

ASHRAE LO-09-088-2009 A Calibrated Multi-Zone Airflow Model for Extension of Ventilation System Tracer Gas Testing

国家能源局, Gas Calibration Box

SY/T 6679.4-2016 Comprehensive logging tool calibration method Part 4: Infrared gas analyzer

Taiwan Provincial Standard of the People's Republic of China, Gas Calibration Box

CNS 3949-1976 Calibration and Caculation of Gas Chromatography
CNS 13234-1993 Gas Analysis - Preparation of Calibration Gas Mixtures (Permeation Method)

ES-AENOR, Gas Calibration Box

UNE 60-756 Pt.5-1987

SE-SIS, Gas Calibration Box

SIS SS 84 21 08-1984 Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids and gases

Professional Standard - Nuclear Industry, Gas Calibration Box

EJ/T 1181-2005 Housings for mounting nuclear air cleaning components

Professional Standard - Forestry, Gas Calibration Box

LY/T 1981-2011 Testing apparatus for formaldehyde emission by the gas analysis method

Hubei Provincial Standard of the People's Republic of China, Gas Calibration Box

DB42/T 1722-2021 On-site Calibration Regulations for Provincial Meteorological Stations

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Gas Calibration Box

ASHRAE OR-10-017-2010 ASHRAE Standard 90.1 Metal Building U-Factors-Part 1: Mathematical Modeling and Validation by Calibrated Hot Box Measurements