ZH
RU
ES

Temperature incubator

Temperature incubator, Total:313 items.

In the international standard classification, Temperature incubator involves: Laboratory medicine, Sterilization and disinfection, Kitchen equipment, Microbiology, Thermodynamics and temperature measurements, Environmental testing, Analytical chemistry, Electrical equipment for working in special conditions, Piezoelectric and dielectric devices, Geology. Meteorology. Hydrology, Biology. Botany. Zoology, Veterinary medicine, Internal combustion engines for road vehicles, Heat pumps, Elements of buildings, Valves, Installations in buildings, Ventilators. Fans. Air-conditioners, Protection against excessive pressure, Air quality, Cans. Tins. Tubes, Road vehicle systems, Electricity. Magnetism. Electrical and magnetic measurements, Electrical accessories, Conducting materials, Domestic, commercial and industrial heating appliances, Burners. Boilers, Reinforced plastics, Petroleum, petroleum products and natural gas handling equipment, Medical equipment, First aid, Galvanic cells and batteries, Construction industry, Shipbuilding and marine structures in general, Non-ferrous metals, Components and accessories for telecommunications equipment, Insulating fluids, Automatic controls for household use, Hospital equipment, Electrical engineering in general, Refrigerating technology, Packaging and distribution of goods in general, Refractories, Electrical and electronic testing, Freight distribution of goods, Rubber and plastics products, Terminology (principles and coordination), Rubber, Paints and varnishes, Earthworks. Excavations. Foundation construction. Underground works, Construction materials, Miscellaneous domestic and commercial equipment, Environmental protection, Iron and steel products, Linear and angular measurements, Testing of metals, Farming and forestry, Water quality, Semiconductor devices, Welding, brazing and soldering, Packaging materials and accessories, TESTING, Fluid storage devices, Cases. Boxes. Crates, Medical sciences and health care facilities in general.


KR-KS, Temperature incubator

National Metrological Technical Specifications of the People's Republic of China, Temperature incubator

  • JJF(纺织) 060-2010 Calibration Specification for Constant Temperature Humidity Chambers
  • JJF(纺织)060-2010 Calibration Specification for Constant Temperature Humidity Chambers
  • JJF(纺织) 104-2021 Calibration Specification for Textile Laboratory with Constant Temperature and Humidity
  • JJF(纺织)104-2021 Calibration Specification for Textile Laboratory with Constant Temperature and Humidity
  • JJF(建材)129-2018 Calibration Specification for Constant Temperature and Humidity Chambers for Safety Glass
  • JJF(建材) 129-2018 Calibration specification for constant temperature and humidity chamber for safety glass testing
  • JJF 2019-2022 Specification for temperature performance test of liquid constant temperature test equipment
  • JJF 1564-2016 Calibration Specifications for Temperature and Humidity Standard Box
  • JJF 2058-2023 Calibration Specification for Environment Parameters of Constant Temperature and Humidity Laboratories
  • JJF 1030-1998 Measurement and Test Norm of Thermostatic Bath's Technological Characteristic
  • JJF 1030-2010 Measurement and Test Norm of Thermostatic Bath's Metrological Characteristics
  • JJF(纺织)105-2023 Calibration Specification for Constant Temperature Water Bath Oscillator
  • JJF 1676-2017 Calibration Specification for Temperature Parameter of Passive Medical Cold Boxes
  • JJF 1170-2007 Calibration Specification for Cryogenic Resistance Thermometers with Negative Sensitivity

Indonesia Standards, Temperature incubator

Group Standards of the People's Republic of China, Temperature incubator

Professional Standard - Medicine, Temperature incubator

未注明发布机构, Temperature incubator

  • GJB/J 3827-1999 Calibration procedures for standard constant temperature and humidity chambers
  • BS 7478:1991(2011) Guide to Selection and use of thermostatic radiator valves

RO-ASRO, Temperature incubator

ZA-SANS, Temperature incubator

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Temperature incubator

German Institute for Standardization, Temperature incubator

  • DIN 12880:2007 Electrical laboratory devices - Heating ovens and incubators
  • DIN 58945-2:1971 Incubators for microbiological purposes; testing
  • DIN EN 17527:2022 Helium cryostats - Protection against excessive pressure
  • DIN EN 17527:2020 Helium cryostats - Protection against excessive pressure; German and English version prEN 17527:2020
  • DIN EN 17527:2022-05 Helium cryostats - Protection against excessive pressure; German version EN 17527:2021
  • DIN 58945-1:1971 Incubators for microbiological purposes; terms, requirements, use
  • DIN EN 60068-3-11:2008 Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers (IEC 60068-3-11:2007); German version EN 60068-3-11:2007
  • DIN EN 257:2020 Mechanical thermostats for gas-burning appliances; German and English version prEN 257:2020
  • DIN EN 257:2010-11 Mechanical thermostats for gas-burning appliances; German version EN 257:2010 / Note: To be replaced by DIN EN 257 (2020-06).
  • DIN EN 257:2020-06 Mechanical thermostats for gas-burning appliances; German and English version prEN 257:2020 / Note: Date of issue 2020-05-08*Intended as replacement for DIN EN 257 (2010-11).
  • DIN 1715-2:1983-11 Thermostat metals; testing the specific thermal curvature
  • DIN 1715-1:1983-11 Thermostat metals; technical delivery conditions
  • DIN 1715-1:1983 Thermostat metals; technical delivery conditions
  • DIN EN 215:2019 Thermostatic radiator valves - Requirements and test methods
  • DIN 1715-2:1983 Thermostat metals; testing the specific thermal curvature
  • DIN EN 215:2018 Thermostatic radiator valves - Requirements and test methods; German and English version prEN 215:2018
  • DIN EN 215:2019-12 Thermostatic radiator valves - Requirements and test methods; German version EN 215:2019
  • DIN EN ISO 13916:2018-03 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017

Taiwan Provincial Standard of the People's Republic of China, Temperature incubator

  • CNS 12256-1988 Ovens for Quartz Crystal Units
  • CNS 9097-1987 Thermostats ( Pressure Type )
  • CNS 9582-1982 Thermostat Metal Sheats for Electric Apparatus
  • CNS 12793-1991 Infant Incubator
  • CNS 9583-1982 Method of test for Thermostat Metal Sheets for Electric Apparatus
  • CNS 6486-1980 Polyethylene(PE) Pipes-Determination of Longitudinal Reversion-Liquid Bath Immersion Method
  • CNS 12794-1991 Method of Test for Infant Incubator
  • CNS 6488-1980 Unplasticized Polyvinyl Chloride(PVC) Pipes - Determination of Longitudinal Reversion - Liquid Bath Immersion Method

Japanese Industrial Standards Committee (JISC), Temperature incubator

National Metrological Verification Regulations of the People's Republic of China, Temperature incubator

Professional Standard - Water Conservancy, Temperature incubator

American Society for Testing and Materials (ASTM), Temperature incubator

  • ASTM E1292-94(2001) Standard Specification for Gravity Convection and Forced Ventilation Incubators
  • ASTM E1292-94(2011) Standard Specification for Gravity Convection and Forced Ventilation Incubators
  • ASTM D7070-16 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
  • ASTM B753-07 Standard Specification for Thermostat Component Alloys
  • ASTM B753-86(1998) Standard Specification for Thermostat Component Alloys
  • ASTM B753-01 Standard Specification for Thermostat Component Alloys
  • ASTM B753-07(2013) Standard Specification for Thermostat Component Alloys
  • ASTM D7070-08 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
  • ASTM E667-98(2003) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
  • ASTM E667-98 Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
  • ASTM B106-96(2002)e1 Standard Test Methods for Flexivity of Thermostat Metals
  • ASTM B106-96 Standard Test Methods for Flexivity of Thermostat Metals
  • ASTM B106-08 Standard Test Methods for Flexivity of Thermostat Metals
  • ASTM B106-08(2013) Standard Test Methods for Flexivity of Thermostat Metals

US-VA, Temperature incubator

US-FCR, Temperature incubator

Korean Agency for Technology and Standards (KATS), Temperature incubator

United States Navy, Temperature incubator

Defense Logistics Agency, Temperature incubator

Professional Standard - Meteorology, Temperature incubator

  • QX/T 16-2002 DJM10 Calibration equipment for humidity instrument
  • QX/T 163-2012 Test method of temperature calibration device for aneroid barometer(barograph)

中国气象局, Temperature incubator

Professional Standard - Machinery, Temperature incubator

机械电子工业部, Temperature incubator

  • JB 5376-1991 Low temperature constant temperature bath technical conditions

BE-NBN, Temperature incubator

Professional Standard - Electron, Temperature incubator

  • SJ/T 31391-1994 Requirements of readiness and methods of inspection and assessment for constant temperature test chambers
  • SJ/T 10186-1991 Testing equipment,series Y73,for Change of temperature.two chambers
  • SJ/T 10187-1991 Testing equipment,series Y73 for Change of temperature.one chamber
  • SJ/T 9560.25-1993 Sealed constant temperature relay--Quality grading standard
  • SJ/Z 9003-1987 Test enclosures of non-injection type for constant relative humidity
  • SJ/T 31390-1994 Requirements of readiness and methods of inspection and assessment for temperature cycling test chambers

Professional Standard - Ferrous Metallurgy, Temperature incubator

  • YB/T 5244-1993 Positive temperature coefficient constant elastic alloy 3J63

AR-IRAM, Temperature incubator

HU-MSZT, Temperature incubator

TR-TSE, Temperature incubator

工业和信息化部, Temperature incubator

European Committee for Standardization (CEN), Temperature incubator

  • FprEN 17527-2021 Helium cryostats - Protection against excessive pressure
  • EN 257:2010 Mechanical thermostats for gas-burning appliances
  • EN 257:2022 Mechanical thermostats for gas-burning appliances
  • EN 257:1992 Mechanical Thermostats for Gas-Burning Appliances Includes Amendment A1 : 1996

Association Francaise de Normalisation, Temperature incubator

  • NF E29-702*NF EN 17527:2021 Helium cryostats - Protection against excessive pressure
  • NF EN 17527:2021 Cryostats pour hélium - Protection contre les surpressions
  • NF S64-030:2004 Rescue systems - Transportation on incubators - Part 2 : system requirements.
  • NF C73-140/A2:1960
  • NF C73-140/A4:1991 Electrical household appliances - Electrical thermostats
  • NF EN 257:2022 Thermostats mécaniques pour appareils à gaz
  • FD V08-601:2005 Microbiologie of food and animal feeding stuffs - Thermostatic chambers - Characterisation, verification and daily follow-up
  • NF D36-500*NF EN 257:2011 Mechanical thermostats for gas-burning appliances
  • NF D36-500:1992 Mechanical thermostats for gas-burning appliances.
  • NF T46-009:1973 Determination of tension set under constant elongation of vulcanized elastomers at normal and elevated temperatures.
  • FD X15-140:2013 Mesure de l'humidité de l'air - Enceintes climatiques et thermostatiques - Caractérisation et vérification
  • NF P52-002:2005 Thermostatic radiator valves - Requirements and test methods.
  • NF P52-002/A1:2006 Thermostatic radiator valves - Requirements and test methods.
  • NF C47-110:1981 Automatic devices for household use. Rooms thermostats.
  • NF A89-253*NF EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
  • NF EN ISO 13916:2018 Soudage - Mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage

ES-UNE, Temperature incubator

IT-UNI, Temperature incubator

ES-AENOR, Temperature incubator

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Temperature incubator

  • ASHRAE 3953-1996 Lines of Constant Skin Temperature with Varying Skin Wettedness
  • ASHRAE SA-96-10-4-1996 Field Experiences in Residential Humidification Control with Temperature-Compensated Automatic Humidistats

Professional Standard - Light Industry, Temperature incubator

British Standards Institution (BSI), Temperature incubator

  • BS EN 17527:2021 Helium cryostats. Protection against excessive pressure
  • 20/30392676 DC BS EN 17527. Helium cryostats. Protection against excessive pressure
  • BS 7942:2000 Thermostatic mixing valves for use in care establishments
  • BS EN 257:1992 Mechanical thermostats for gas-burning appliances
  • BS EN 257:2010 Mechanical thermostats for gas-burning appliances
  • BS EN ISO 2812-5:2007 Paints and varnishes - Determination of resistance to liquids - Temperature-gradient oven method
  • 20/30401719 DC BS EN 257. Mechanical thermostats for gas-burning appliances
  • BS EN 215:2019 Thermostatic radiator valves. Requirements and test methods
  • BS EN 257:2022 Tracked Changes. Mechanical thermostats for gas-burning appliances
  • BS EN ISO 13916:2017 Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature

SE-SIS, Temperature incubator

GB-REG, Temperature incubator

  • REG NACA-TN-3462-1955 Tensile properties of 7075-T6 and 2024-T3 aluminum-alloy sheet heated at uniform temperature rates under constant load

IN-BIS, Temperature incubator

American National Standards Institute （ANSI), Temperature incubator

Standard Association of Australia （SAA）, Temperature incubator

  • AS 4619:2004 Gas appliance thermostats
  • AS 4032.4:2014 Water supply — Valves for the control of heated water supply temperatures, Part 4: Thermostatically controlled taps for the control of heated water supply temperatures
  • AS 1774.12:2001 Refractories and refractory materials - Physical test methods - Refractoriness under load - Temperatures of deformation at constant load with rising temperature
  • AS 3711.5:2000 Freight containers - Thermal containers
  • AS 1774.12:2001(R2013)
  • AS 1308:1987 Electric water heaters - Thermostats and thermal cutouts
  • AS 1308:1987/Amdt 1:1988
  • AS 4032.3:2004 Water supply - Valves for the control of hot water supply temperatures - Requirements for field testing, maintenance or replacment of thermostatic mixing valves, tempering valves and end of line temperature control devices
  • AS ISO 13916:2018 Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature

Professional Standard - Chemical Industry, Temperature incubator

工业和信息化部/国家能源局, Temperature incubator

Professional Standard - Post and Telecommunication, Temperature incubator

  • YD/T 2061-2009 Constant temperature & humidity air conditioning system for telecommunication room
  • YD/T 2434-2012 Battery cabinet with temperature control system for telecommunications

Professional Standard-Ships, Temperature incubator

Canadian Standards Association (CSA), Temperature incubator

Professional Standard - Construction Industry, Temperature incubator

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Temperature incubator

NEMA - National Electrical Manufacturers Association, Temperature incubator

Hebei Provincial Standard of the People's Republic of China, Temperature incubator

Military Standard of the People's Republic of China-General Armament Department, Temperature incubator

  • GJB 1517-1992 General specifications for thermostatic relays
  • GJB 3315A-2021 Specification for constant elastic alloys with small torsional frequency and temperature coefficient
  • GJB 3315-1998 Specification for constant elastic alloys with small torsional frequency and temperature coefficient
  • GJB 1517A-2011 General specification for relays,thermostatic
  • GJB 2153A-2018 Specification for high stable low frequency temperature coefficient constant elastic alloys
  • GJB 2153-1994 Specification for high stable low frequency temperature coefficient constant elastic alloys

RU-GOST R, Temperature incubator

  • GOST 32029-2012 Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods
  • GOST R 50267.20-1997 Medical electrical equipment. Part 2. Particular requirements for safety of transport incubators
  • GOST R 50267.19-1996 Medical electrical equipment. Part 2. Particular requirements for safety of baby incubators
  • GOST R EN 257-2004 Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods

Lithuanian Standards Office , Temperature incubator

  • LST EN 60068-3-6-2003 Environmental testing. Part 3-6: Supporting documentation and guidance. Confirmation of the performance of temperature/humidity chambers (IEC 60068-3-6:2001)
  • LST EN 257-2010 Mechanical thermostats for gas-burning appliances
  • LST EN 215-2004 Thermostatic radiator valves - Requirements and test methods
  • LST EN 215-2004/A1-2006 Thermostatic radiator valves - Requirements and test methods

VN-TCVN, Temperature incubator

  • TCVN 7303-2-20-2007 Medical electrical equipment.Part 2-20: Particular requirements for the safety of transport incubators

JP-JCS, Temperature incubator

  • JCS 1363-2009 High strength grade thermo resistant aluminium alloy conductors ,steel reinforced

CZ-CSN, Temperature incubator

Danish Standards Foundation, Temperature incubator

AT-ON, Temperature incubator

NL-NEN, Temperature incubator

AENOR, Temperature incubator

PL-PKN, Temperature incubator

National Electrical Manufacturers Association（NEMA), Temperature incubator

NO-SN, Temperature incubator

  • NS 5508-1978 Thermometers - Thermometer wells for industrial thermometers type C

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Temperature incubator

  • JEDEC JEP153A-2014 Characterization and Monitoring of Thermal Stress Test Oven Temperatures

Anhui Provincial Standard of the People's Republic of China, Temperature incubator

  • DB34/T 2987-2017 Experimental method for thermal physical properties of thermal insulation materials (constant temperature plane heat source method)

CU-NC, Temperature incubator

  • NC 22-07-1985 Lab Apparatuses. Thermostatic Bath. Quality Specifications

国家能源局, Temperature incubator

  • NB/SH/T 0983-2019 Determination of Low Temperature Viscosity of Transmission System Lubricant by Constant Shear Stress Viscometer Method

Professional Standard - Aviation, Temperature incubator

  • HB 6783.13-1993 Military airborne equipment climate environment test box (room) verification method temperature-humidity-altitude test box (room)
  • HB 6783.4-1993 Military Airborne Equipment Climatic Environment Test Chamber (Chamber) Verification Method Temperature-Altitude Test Chamber (Chamber)

ESDU - Engineering Sciences Data Unit, Temperature incubator

  • AERO 00.03.26 A-1973 Wall and average gas temperatures for subsonic turbulent flow with heat transfer in ducts of constant circular cross section.
  • ESDU 06019-2007 Temperature measurement: resistance thermometry.

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Temperature incubator

  • ARI 750-2007 Performance Rating of Thermostatic Refrigerant Expansion Valves

CEN - European Committee for Standardization, Temperature incubator

  • PREN 215-2018 Thermostatic radiator valves - Requirements and test methods

Gansu Provincial Standard of the People's Republic of China, Temperature incubator

  • DB62/T 2420-2014 Tenebrio constant temperature three-dimensional culture technical regulations

International Electrotechnical Commission (IEC), Temperature incubator

  • IEC 60260:1968 Test enclosures of non-injection type constant relative humidity

European Committee for Electrotechnical Standardization（CENELEC）, Temperature incubator

  • HD 98 S1-1988 Test Enclosures of Non-Injection Type Constant Relative Humidity

International Organization for Standardization (ISO), Temperature incubator

  • ISO 13916:2017 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature

Chongqing Provincial Standard of the People's Republic of China, Temperature incubator

  temperate box, Fruit incubator, Cryostat, Medical incubator, liquid incubator, Medical incubator, Thermostat Specifications, Thermostat Specifications, Medical incubator, large incubator, incubator medical, Medical incubator, Thermostat temperature, Temperature incubator, Thermostat temperature, Temperature incubator, The temperature of the incubator, Thermostat + temperature, Thermostat temperature requirements, Medical incubator Medical incubator.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved