breakdown voltage

breakdown voltage, Total:136 items.

In the international standard classification, breakdown voltage involves: Electronic components in general, Insulating fluids, Sacks. Bags, Power stations in general, Insulating materials, Paper and board, Electrical wires and cables, Semiconductor devices, Electricity. Magnetism. Electrical and magnetic measurements, Insulation, Optoelectronics. Laser equipment, Test conditions and procedures in general, Surface treatment and coating, Rubber, Products of the chemical industry, Electrical accessories.

Institute of Interconnecting and Packaging Electronic Circuits (IPC), breakdown voltage

IPC TM-650 2.5.6.3-1986 Dielectric Breakdown Voltage and Dielectric Strength

CZ-CSN, breakdown voltage

CSN 34 7010 Cast.38-1972 Breakdown voltage test of enamelled round wire
CSN 34 7010 Cast.37-1972 Breakdown voltage test of enamelled round wire
CSN 34 7171-1965 Breakdown voltage test. Wires. Conductors for winding
CSN 34 7192-1965 Breakdown voltage test of strips. Conductors for winding.
CSN 35 8763-1973 Semiconductor devices. Diodes. Measurement o? reverse breakdown voltage
CSN 50 0452-1988 Condenser páper. Determination of breakdown voltage at alternating (50 Hz) and direct voltage
CSN 34 7193-1969 Winding wires Insulated rectangular wires Breakdown test after mechanical stressing
CSN 34 7010 Cast.46-1976 Breakdown voltage test of fibre an.l tape covered winding wires after thermal .inJ mechanical stressing.
CSN 35 8757 Cast.12-1989 Blpolar transistors. Impuls measuring method of break-down voltage collector-emltter
CSN 35 8757 Cast.1-1985 Transistors. Measuring method of collector-base and emitterbase breakdown voltage

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, breakdown voltage

GB/T 507-2002 Insulating liquids--Determination of the breakdown voltage at power frequency
GB/T 21222-2007 Methods for the determination of the lightning impulse breakdown voltage of insulating liquids
GB/T 3333-1999 Cable paper--Determination of electrical strength at powerfrequence
GB/T 1695-2005 Rubber,vulcanized.Determination of electrical breakdown strength and voltage resistant at commercial power frequency

HU-MSZT, breakdown voltage

MSZ 15802/3-1981 Enameled wire breakdown voltage power detection

国家质量监督检验检疫总局, breakdown voltage

SN/T 4789-2017 Test method for breakdown voltage of container bags

Professional Standard - Electricity, breakdown voltage

DL 418-1991 Method for determining breakdown voltage of insulating liquid from impact of thunder and lightning

(U.S.) Ford Automotive Standards, breakdown voltage

FORD FLTM BB 101-12-2000 TEST OF AUTOMOTIVE ELECTRICAL CABLE FOR DURATION VOLTAGE AND BREAKDOWN VOLTAGE

Professional Standard - Machinery, breakdown voltage

JB/T 9478.12-1999 Measuring methods of photocell - Inverse breakdown voltage
JB/T 9478.12-2013 Photovoltaic Cell Measurement Methods Part 12: Reverse Breakdown Voltage
JB/T 9439-1999 Xerographic printing dry developer - Test method for carrier breakdown voltage
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
JB/T 4279.11-2008 Verification procedure for test equipment of enamelled winding wire.Part 11:Breakdown voltage tester

International Electrotechnical Commission (IEC), breakdown voltage

IEC 60897:1987 Methods for the determination of the lightning impulse breakdown voltage of insulating liquids
IEC 60156:2018 RLV Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
IEC 60156:2018 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
IEC 60156:1995 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method

RU-GOST R, breakdown voltage

GOST 14340.7-1974 Enamelled round winding wires. Method of the breakdown voltage test
GOST 18986.24-1983 Semiconductor diodes. Measurement method of breakdown voltage
GOST R IEC 60156-2013 Insulating liquids. Determination of the breakdown voltage at power frequency
GOST 22466.3-1977 Discharge impulsive sources of highintensity optical radiation. Method for measuring the self-breakdown voltage
GOST 16745-1983 Capacity paper. Method for determining break-down voltage at alternating (frequency 50 Hz.) and direct voltage

Korean Agency for Technology and Standards (KATS), breakdown voltage

KS C IEC 60156:2003 Insulating liquids-Determination of the breakdown voltage at power frequency-Test method
KS C IEC 60156-2003(2018) Insulating liquids－Determination of the breakdown voltage at power frequency－Test method
KS C 2131-1996 Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS C 2131-1996(2016) Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS C 2131-1996(2021) Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials

Professional Standard - Energy, breakdown voltage

NB/T 10450-2020 Method for Determination of Breakdown Voltage of Insulating Liquid in DC Electric Field

国家能源局, breakdown voltage

NB/T 10450-2025 Determination of DC electric field breakdown voltage of insulating liquids

Professional Standard - Aerospace, breakdown voltage

QJ 2220.3-1992 Coating electrical insulation performance test method Measurement method of breakdown voltage, breakdown strength and withstand voltage under power frequency
QJ 1990.4-1990 Electrical performance test methods of electrical insulating adhesives breakdown voltage and breakdown strength under power frequency
QJ 483-1990 Test method for breakdown voltage of aluminum and aluminum alloy insulating anodized film layer

Professional Standard - Electron, breakdown voltage

SJ 2141-1982 Methods of measurement for breakdown voltage of silicon currenet regulator diodes
SJ 966-1975 Methods of measurement for reverse breakdown voltage of silicon switching diodes
SJ 2354.2-1983 Method of measurement for reverse break-down voltage of PIN and avalanche photodiodes
SJ 2214.4-1982 Method of measurement for reverse break-down voltage of semiconductor photodiodes
SJ 2215.5-1982 Method of measurement for reverse breakdown voltage of semiconductor photocouplers (diodes)
SJ 2354.12-1983 Method of measurement for temperature factor of reverse breakdown voltage of PIN and avalanche photodiodes
SJ 2215.7-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor photocouplers (diodes)
SJ 2214.6-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor phototransistors

VDE - VDE Verlag GmbH@ Berlin@ Germany, breakdown voltage

VDE 0370-2009 Pruefverfahren zur Bestimmung der Blitzimpuls-Durchschlagspannung von Isolierfluessigkeiten (IEC 60897:1987)

Association Francaise de Normalisation, breakdown voltage

NF C27-218:1988 Fluides pour applications électrotechniques - Méthodes de détermination de la tension de claquage au choc de foudre des liquides isolants
NF EN ISO 2376:2019 Anodisation de l'aluminium et de ses alliages - Détermination de la tension électrique de claquage et tension de tenue
NF C27-221*NF EN 60156:1995 Insulating liquids. Determination of the breakdown voltage at power frequency. Test method.
NF A91-483:2010 Anodizing of aluminium and its alloys - Determination of electric breakdown potential.
NF EN 13763-21:2004 Explosifs à usage civil - Détonateurs et relais - Partie 21 : détermination de la tension de claquage des détonateurs électriques
NF A91-405:1983 Anodizing of aluminium and its alloys. Insulation check by measuring breakdown potential.

Indonesia Standards, breakdown voltage

SNI 04-7068-2005 Insulating liquids - Determination of the breakdown voltage at power frequency - Test methods

Danish Standards Foundation, breakdown voltage

DS/EN 60156:1996 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method

未注明发布机构, breakdown voltage

BS EN 60156:1996(1999) Insulating liquids — Determination of the breakdown voltage at power frequency — Test method
DIN EN ISO 2376 E:2017-11 Determination of anodizing breakdown voltage and withstand voltage of aluminum and its alloys (draft)

KR-KS, breakdown voltage

KS C IEC 60156-2003(2023) Insulating liquids－Determination of the breakdown voltage at power frequency－Test method

British Standards Institution (BSI), breakdown voltage

BS EN 60156:1996 Insulating liquids. Determination of the breakdown voltage at power frequency. Test method
BS EN ISO 2376:2019 Anodizing of aluminium and its alloys. Determination of breakdown voltage and withstand voltage
22/30409214 DC BS IEC 60156. Insulating liquids. Determination of the breakdown voltage at power frequency. Test method
BS EN 13763-21:2003 Explosives for civil uses - Detonators and relays - Determination of flash-over voltage of electric detonators
BS EN 13763-21:2004 Explosives for civil uses - Detonators and relays - Determination of flash-over voltage of electric detonators

German Institute for Standardization, breakdown voltage

DIN EN 60156:1996 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method (IEC 60156:1995); German version EN 60156:1995
DIN EN ISO 2376:2010 Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO 2376:2010); German version EN ISO 2376:2010
DIN EN ISO 2376:2019-07 Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019); German version EN ISO 2376:2019
DIN EN ISO 2376:2019 Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)

PL-PKN, breakdown voltage

PN T01505 ArkusZ10-1974 Field-effecl transistors Measuring method Ga?e-source breakdown voltage U(8R) GSS
PN T01505 ArkusZ09-1974 Field-effect transittors Measuring method Drain-source breakdown voltage U(BR) DSS
PN T01504 ArkusZ03-1974 Transistort Measuremen? ?/(BR)U0, U(B?)CES, U(8BCH, L/(BU)UX

Professional Standard - Geology, breakdown voltage

DZ/T 0276.15-2015 Regulation for testing the physical and mechanical properties of rock.Part 15:Test for determining the breakdown voltage and breakdown strength of rock

European Committee for Standardization (CEN), breakdown voltage

EN ISO 2376:2019 Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
EN ISO 2376:2010 Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO 2376:2010)
EN 12373-17:2001 Aluminium and Aluminium Alloys - Anodizing - Part 17: Determination of Electric Breakdown Potential

International Organization for Standardization (ISO), breakdown voltage

ISO 2376:2010 Anodizing of aluminium and its alloys - Determination of electric breakdown potential
ISO 2376:2019 Anodizing of aluminium and its alloys — Determination of breakdown voltage and withstand voltage

AENOR, breakdown voltage

UNE-EN 60156:1997 INSULATING LIQUIDS. DETERMINATION OF THE BREAKDOWN VOLTAGE AT POWER FRequency. Test method.

Society of Automotive Engineers (SAE), breakdown voltage

SAE AIR23054-2023 AS23053/12 Heat Shrink Sleeving Specification Change from Dielectric Strength to Breakdown Voltage

Standard Association of Australia （SAA）, breakdown voltage

AS 1767.2.1:1999 Insulating liquids - Test Methods - Determination of the breakdown voltage at power frequency

Lithuanian Standards Office , breakdown voltage

LST EN 60156-2002 Insulating liquids. Determination of the breakdown voltage at power frequency. Test method (IEC 60156:1995)

ES-UNE, breakdown voltage

UNE-EN ISO 2376:2019 Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)

American Society for Testing and Materials (ASTM), breakdown voltage

ASTM D1816-12 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
ASTM D3300-20 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Under Impulse Conditions
ASTM D1816-12(2019) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
ASTM D877-02e1 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-02 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877/D877M-19 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-02(2007) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D2477-07 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-07(2012) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D877-00 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-87(1995) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM F1662-10 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM F1662-03 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM D877/D877M-13 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D1816-97 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
ASTM D3426-19 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
ASTM D1816-03 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
ASTM D1816-04 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
ASTM D3755-97 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D3755-97(2004) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D149-09(2013) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D149-97a(2004) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D149-97a Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D149-09 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D149-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D3426-97 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
ASTM D3426-97(2004) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
ASTM D3426-97(2012) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
ASTM D3755-14 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D3300-00 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
ASTM D3300-00(2006) Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
ASTM D3300-12 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
ASTM D3755-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
ASTM D2477-02e1 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-07 adjunct 2009 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-02 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-02e2 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-96 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM D2477-07(2020) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
ASTM F1662-04 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
ASTM F1662-16 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device

European Committee for Electrotechnical Standardization（CENELEC）, breakdown voltage

EN 60156:1995 Insulating Liquids Determination of the Breakdown Voltage at Power Frequency Test Method

National Metrological Verification Regulations of the People's Republic of China, breakdown voltage

JJG(电子) 04003-1987 BJ2952A (JS-3A) Transistor Reverse Breakdown Voltage Tester Trial Verification Regulations
JJG(电子) 04018-1988 BJ2901 Bipolar Transistor Reverse Breakdown Voltage Standard Instrument Trial Verification Regulations

YU-JUS, breakdown voltage

JUS C.T7.240-1984 Anodic oxidation ofaluminium and aluminium alloys. Insulation check by measurement ofbreakdown potential

RO-ASRO, breakdown voltage

STAS 7043/4-1986 Non metallic coatings (inorganic) ANODIZING OF ALUMINIUM AND ITS ALLOYS Determination of breakdown potential of insulation coating

ECIA - Electronic Components Industry Association, breakdown voltage

EIA-364-117-2017 TP-117 Dielectric Breakdown Voltage Test Procedure for Electrical Connectors@ Sockets and Coaxial Contacts

American National Standards Institute （ANSI), breakdown voltage

ANSI/ASTM D3426:1995 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves (10.02)
ANSI/ASTM D149:2009 Test Method For Dielectric Breakdown Voltage And Dielectric Strength Of Solid Electrical Insulating Materials At Commercial Power Frequencies

SE-SIS, breakdown voltage

SIS SS-ISO 2376:1985 Anodization (anodic oxidation) of aluminium and its alloys - Insulation check by measurement of breakdown potential