ZH
RU
ES

parallel blank

parallel blank, Total:125 items.

In the international standard classification, parallel blank involves: Screw threads, Machine tools, Electrical wires and cables, Construction materials, Paper and board, Photography, Components for electrical equipment, Electronic tubes, Data storage devices, Quality, Semiconductor devices, Materials for aerospace construction, Components and accessories for telecommunications equipment, Electromechanical components for electronic and telecommunications equipment, Air quality, Capacitors, Transformers. Reactors, Mining equipment, Aids for disabled or handicapped persons, Integrated circuits. Microelectronics, Power transmission and distribution networks, Aerospace electric equipment and systems, Audio, video and audiovisual engineering, Resistors, Components for aerospace construction, Aircraft and space vehicles in general.

American National Standards Institute （ANSI), parallel blank

ANSI/ASME B16.48-2020 Line Blanks
ANSI/INCITS 315-1998 Information Technology - Magnetic Tape and Cartridge for Information Interchange, Unrecorded, 128-Track, Parallel Serpentine, 12.65 mm (1/2 in), 2550 ftpmm (64 770 ftpi) Replaces ANSI NCITS 315-1998
ANSI PH2.34-1987 Photography (sensitometry) - Black-and-white aerial camera films - Determination of ISO speed and average gradient
ANSI/EIA 540AB00:1991 Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment, Blank Detail Specification for
ANSI/INCITS 315-1998(R2003) for Information Technology – Magnetic Tape and Cartridge for Information Interchange – Unrecorded, 128-track, Parallel Serpentine, 12.65 mm (1/2 in), 2550 ftpmm (64 770 ftpi)
ANSI/ISO 7829:1986 Photography (sensitometry) - Black-and-white aerial camera films - Determination of ISO speed and average gradient

German Institute for Standardization, parallel blank

DIN 2626:2016-06 Line blanks
DIN 344:1981-10 Core drills with parallel shank
DIN 53442:1990-09 Flexural fatique testing of plastics using flat specimens
DIN EN 135001:1993 Blank detail specification: C.W. power amplifier travelling wave tubes up to 500 Watts; German version EN 135001:1992
DIN 25423 Bb.1:1987 Sampling procedures for the monitoring of radioactivity in air; instructions for the calculation of particle loss in sampling air ducts and instructions on estimates of errors due to anisokinetic sampling
DIN 65469:1992 Aerospace; fibre-reinforced plastics; tensile test of monolayer flat tension specimens
DIN ISO 16000-38:2019-06 Indoor air - Part 38: Determination of amines in indoor and test chamber air - Active sampling on samplers containing phosphoric acid impregnated filters (ISO 16000-38:2019)
DIN 48075-2:1972-07 Parallel groove clamps for stranded conductors of copper and bronce, for overhead power lines
DIN EN 132102:1997 Blank detail specification: Fixed multilayer ceramic surface mounting capacitors - Assessment level DZ; German version EN 132102:1996
DIN ISO 16000-38:2019 Indoor air - Part 38: Determination of amines in indoor and test chamber air - Active sampling on samplers containing phosphoric acid impregnated filters (ISO 16000-38:2019)

British Standards Institution (BSI), parallel blank

BS 84:2007 Parallel screw threads of Whitworth form – Requirements
BS ISO 3951-4:2011 Sampling procedures for inspection by variables. Procedures for assessment of declared quality levels
BS IEC 61935-2-23:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801. Cord and work area cord category 7. Blank detail specification
BS IEC 61935-2-24:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801. Cord and work area cord category 7A. Blank detail specification
BS ISO 16000-38:2019 Indoor air - Determination of amines in indoor and test chamber air. Active sampling on samplers containing phosphoric acid impregnated filters
BS EN 3475-809:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance
BS ISO 16000-3:2011 Indoor air. Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air. Active sampling method
BS ISO 28597:2017 Tracked Changes. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million

RU-GOST R, parallel blank

GOST 25889.2-1983 Metal-cutting machine tools. Methods of checking specimen two flat surfaces for parallelism
GOST 26189-1984 Metal-cutting machine tools. Methods of complex checking two specimen flat surfaces for parallelism and straigntness
GOST R 55642-2013 Lifting platforms for persons with impaired mobility. Rules and methods of examinations (tests) and measurements. Rules of sampling
GOST R ISO 16000-38-2021 Indoor air. Part 38. Determination of amines in indoor and test chamber air. Active sampling on samplers containing phosphoric acid impregnated filters

IT-UNI, parallel blank

UNI 5805-1966

Xinjiang Provincial Standard of the People's Republic of China, parallel blank

DB65/T 3246-2011 Parallel bundled overhead insulated cables

American Society for Testing and Materials (ASTM), parallel blank

ASTM C322-09(2014) Standard Practice for Sampling Ceramic Whiteware Clays
ASTM F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D6151-97 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
ASTM F311-97(2002) Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM F311-08 Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters

CZ-CSN, parallel blank

CSN 22 1480-1979 Core drills with parallel shanks. Basic dimen,sions

Association Francaise de Normalisation, parallel blank

NF EN 27023:1993 Emballages - Sacs - Méthode d'échantillonnage de sacs vides pour essais.
NF E66-057*NF ISO 7079:2017 Core drills with parallel shanks and with Morse taper shanks
NF B51-018:1988 Wood. Tensile parallel to grain. Determination of modulus of elasticity in tensile parallel to grain using small clear specimens.
NF B51-017:1988 Wood. Tensile parallel to grain. Determination of ultimate tensile stress parallel to grain using small clear specimens.
NF X43-257:2008 Air quality - Workplace air - Sampling of an aerosol using a closed-face cartridge (4 mm opening).
NF ISO 2859-1:2000 Règles d'échantillonnage pour les contrôles par attributs - Partie 1 : procédures d'échantillonnage pour les contrôles lot par lot, indexés d'après le niveau de qualité acceptable (NQA)
NF ISO 2859-1/A1:2011 Règles d'échantillonnage pour les contrôles par attributs - Partie 1 : procédures d'échantillonnage pour les contrôles lot par lot, indexés d'après le niveau de qualité acceptable (NQA)
NF X43-298:2013 Air des lieux de travail - Conduite d'une intervention en vue d'estimer l'exposition professionnelle aux agents chimiques par prélèvement et analyse de l'air des lieux de travail
NF EN 16413:2014 Air Ambiant - Biosurveillance à l'aide de lichens - Évaluation de la diversité des lichens épiphytes
NF L52-250-802*NF EN 3475-802:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802 : capacitance unbalance
NF C83-158:2006 Blank Detail Specification : fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E.
NF C86-111:1990 Harmonized system of quality assessment for electronic components integrated operational amplifiers. Blank detail specification.
NF X43-273:1991 Qualité de l'air - Air des lieux de travail - Détermination du bromure de méthyle - Prélèvement par pompage sur charbon actif traité.
NF X43-404-18*NF ISO 16000-18:2011 Indoor air - Part 18 : detection and enumeration of moulds - Sampling by impaction.

Japanese Industrial Standards Committee (JISC), parallel blank

JIS P 8110:2001 Paper and board -- Sampling to determine average quality
JIS A 1968:2005 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Pumped sampling
JIS A 1968:2015 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Pumped sampling
JIS A 1969:2005 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Diffusive sampling
JIS A 1969:2015 Indoor air -- Sampling and analysis of volatile organic compounds by solvent desorption/capillary gas chromatography -- Diffusive sampling

Society of Automotive Engineers (SAE), parallel blank

SAE RS-202-1-1944 RS202 Preparation of Surface of Layout Blanks for Lithographic Reproduction

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., parallel blank

ASHRAE SE-99-17-1-1999 Air Sampling Using a Shared-Sensor@ Vacuum-Draw Approach
ASHRAE OR-10-053-2010 Moving Ducts into Conditioned Space: Getting to Code in the Pacific Northwest

IX-ECMA, parallel blank

ECMA 392-2009 MAC and PHY for Operation in TV White Space 1st Edition

RO-ASRO, parallel blank

STAS 8237/8-1975 AIR DRIVEN ROTARY PARALLEL VICES, FOR MACHINE-TOOLS Dimensions
STAS 7391/3-1974 Tolerances of form and of position TOLERANCES OF PARALLELISM, OF PERPENDICULARITY AND OF ANGULARITY

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, parallel blank

GB 9862-1988 Method for determination of sensitivity and average slope of black and white aerial photographic film
GB/T 9862-1988 Method for determining the speed and average gradient of black-and-white aerial camera films
GB 11438-1989 Blank Detail Specification Assessment Level A for Ferrite Cores for Broadcast Receiver Antennas
GB 11306-1989 Blank Detail Specification for Fixed Capacitors for Electronic Equipment Evaluation Level E of Class 3 Ceramic Capacitors
GB/T 11306-1989 Fixed capacitors for use in electronic equipment--Blank detail specification: Fixed capacitors of ceramic dielectric, class 3--Assessment level E
GB/T 11438-1989 Ferrite cores used in broadcast receiver aerials--Blank detail specification--Assessment level A
GB/T 6664-1986 Blank detail specification for directly heated negative temperature coefficient thermistors--Assessment level E

Canadian General Standards Board （CGSB), parallel blank

CGSB 2.11-94METH 40-CAN/CGSB-1994 Methods of Sampling and Testing Soaps and Detergents Optical Brighteners Substantivity Test

Professional Standard - Electron, parallel blank

SJ 2877-1988 Blank detail specification for deflection yoke cores for TV receivers Assessment level A
SJ 2599-1985 Blank detail specification for aluminium electrolytic capacitors for use in a.c. motors Assessment level E
SJ/T 11161-1998 Bonded permanent ferrite magnets for seal Blank detail specification.Assessment level A
SJ/T 10430-1993 Blank detail specification for the plenoresistive pressure transducer Assessment level E
SJ/T 10436-1993 Blank detail Specification for the semiconductor resistance strain gage Assessment level E
SJ 2601-1985 Blank detail specification for fixed oil dipped paper dielectric capacitors for use in a.c. motors
SJ 2602-1985 Blank detail specification for fixed metallized paper dielectric capacitors for use in a.c. motors
SJ/T 10021-1991 Blank detail specification for fixed inductors for use in electornic equipment.Assessment level E
SJ 2600-1985 Blank detail specification for fixed metallized polyproptlene capacitors for use in a.c. motors
SJ 2880-1988 Blank detail specification for magnet assemblies for color purity and static convergence used in color TV receivers Assessment level A

Lithuanian Standards Office , parallel blank

LST EN 135001-2001 Blank detail specification. C.W. power amplifier travelling wave tubes up to 500 Watts

FI-SFS, parallel blank

SFS 2186-1977

Aerospace, Security and Defence Industries Association of Europe (ASD), parallel blank

ASD-STAN PREN 4112-2010 Aerospace series Pins, parallel, in corrosion resisting steel, passivated Edition P2

AENOR, parallel blank

UNE-EN 27023:1994 PACKAGING. SACKS. METHOD OF SAMPLING EMPTY SACKS FOR TESTING. (ISO 7023:1983).
UNE 109500:2000 IN Installation of parallelepipedic steel tanks for the aerial storage of liquid fuels and carburetants.
UNE 16139:1985 PARALLEL SHANK TWIST DRILLS, JOBBER AND STUB SERIES. MORSE TAPER SHANK TWIST DRILLS AND CORE DRILLS.

ETSI - European Telecommunications Standards Institute, parallel blank

TR 102 907-2012 Reconfigurable Radio Systems (RRS); Use Cases for Operation in White Space Frequency Bands (V1.2.1)
TR 102 907-2011 Reconfigurable Radio Systems (RRS); Use Cases for Operation in White Space Frequency Bands (V1.1.1)
TR 103 231-2014 White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Information on weblistings of TV White Space Databases (TVWSDBs) (V1.1.1)
TS 102 946-2014 Reconfigurable Radio Systems (RRS); System requirements for Operation in UHF TV Band White Spaces (V1.1.1)

Group Standards of the People's Republic of China, parallel blank

T/CAS 458-2020 Overhead bundled insulated conductors with rated voltages up to and including 1kV
T/CHALPA 0001-2023 Guidelines for the Cultivation and Level Assessment of “Junior Pilot” UAS & Aviation Technical Competencies

European Telecommunications Standards Institute (ETSI), parallel blank

ETSI TR 102 907-2012 Reconfigurable Radio Systems (RRS); Use Cases for Operation in White Space Frequency Bands (V1.2.1)
ETSI TR 102 907-2011 Reconfigurable Radio Systems (RRS); Use Cases for Operation in White Space Frequency Bands V1.1.1
ETSI TR 103 231-2014 White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Information on weblistings of TV White Space Databases (TVWSDBs) (V1.1.1)
ETSI TR 101 233-1998 Television Systems; Code of Practice for Allocation of Services in the Vertical Blanking Interval (VBI) (V1.1.1)
ETSI TS 102 946-2014 Reconfigurable Radio Systems (RRS); System requirements for Operation in UHF TV Band White Spaces (V1.1.1)

Electronic Components, Assemblies and Materials Association, parallel blank

ECA 540AB00-1991 Blank Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment

Korean Agency for Technology and Standards (KATS), parallel blank

KS C IEC 60938-2-1-2003(2008) Fixed inductors for electromagnetic interference suppression－Part 2－1：Blank detail specification－Inductors for which safety tests are required－Assessment level D
KS C IEC 60738-1-1-2001(2011) Thermistors－Directly heated positive step-function temperature coefficient－Part 1－1：Blank detail specification －Current limiting application－Assessment level EZ

International Electrotechnical Commission (IEC), parallel blank

IEC 61156-2-1:2003 Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring; Blank detail specification

European Standard for Electrical and Electronic Components, parallel blank

EN 135001:1992 Blank detail specification: C.W. power amplifier travelling wave tubes up to 500 Watts

International Organization for Standardization (ISO), parallel blank

ISO 7829:1986 Photography; Black-and-white aerial camera films; Determination of ISO speed and average gradient
ISO 7829:1986/cor 1:2001 Photography - Black-and-white aerial camera films - Determination of ISO speed and average gradient; Technical Corrigendum 1

National Aeronautics and Space Administration (NASA), parallel blank

NASA-TN-D-523-1960 Investigation of the flow in a rectangular cavity in a flat plate at a mach number of 3.55

US-FCR, parallel blank

FCR COE CRD-C 62-69-1969 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TESTING CYLINDRICAL TEST SPECIMENS FOR PLANENESS AND PARALLELISM OF ENDS AND PERPENDICULARITY OF SIDES

ECIA - Electronic Components Industry Association, parallel blank

540AB00-1991 Blank Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment

Institute of Electrical and Electronics Engineers (IEEE), parallel blank

DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: Th DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: The Case of the Energy Sector
DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: Th DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: The Case of the Energy Sector
DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: Th DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: The Case of the Energy Sector
DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: Th DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: The Case of the Energy Sector
DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: Th DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: The Case of the Energy Sector
DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: Th DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: The Case of the Energy Sector
DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: Th DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: The Case of the Energy Sector
DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: Th DIITA-Gender Equality and Social Inclusion (GESI) Workstream White Paper - Gender and Technology: The Case of the Energy Sector

PL-PKN, parallel blank

PN Z04008-08-1989 Air purity protection Sampling methods t SampJing the atmospheric air (imision) for microbiological analysis by aspiration and sedimentation method

PT-IPQ, parallel blank

NP 2211-1986

AWS - American Welding Society, parallel blank

F1.1-1985 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES

SE-SIS, parallel blank

SIS SS 16 11 56-1984 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injec- tion moulding and compression moulding)

SSPC - The Society for Protective Coatings, parallel blank

TU 7-2015 CONDUCTING AMBIENT AIR@ SOIL@ AND WATER SAMPLING OF SURFACE PREPARATION AND PAINT DISTURBANCE ACTIVITIES

The Society for Protective Coatings (SSPC), parallel blank

SSPC TU 7-2015 CONDUCTING AMBIENT AIR, SOIL, AND WATER SAMPLING OF SURFACE PREPARATION AND PAINT DISTURBANCE ACTIVITIES

Professional Standard - Electricity, parallel blank

DL/T 5253-2010 Design technique and construction regulations for low-voltage distribution network based on the overhead bundled insulated conductors

Professional Standard - Civil Aviation, parallel blank

AP-121AA-07-1999 Airworthiness Certification Procedures for Civil Aircraft Reduced Vertical Separation Standard (PVSM) Operations in Pacific Airspace

U.S. Military Regulations and Norms, parallel blank

ARMY MIL-PRF-55342/8 E (3)-2012 RESISTORS, CHIP, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, SPACE LEVEL, STYLE RM2010

International Telecommunication Union (ITU), parallel blank

ITU-R REPORT RS.2187-2010 Determining radiosonde maximum interference levels from link analysis and flight studies

Professional Standard - Military and Civilian Products, parallel blank

WJ 1575-1984 Parallel vacuum coating fixtures for optical parts cold processing and special process fixtures