ZH

RU

ES

transmission edge

transmission edge, Total:418 items.

In the international standard classification, transmission edge involves: Lamps and related equipment, Optics and optical measurements, Glass, Photography, Plastics, Optical equipment, Welding, brazing and soldering, Medical equipment, Protection against fire, Ceramics, Radiation protection, Analytical chemistry, Paper and board, Pulps, Reinforced plastics, Rubber and plastics products, Electrical and electronic testing, Fibre optic communications, Optoelectronics. Laser equipment, Solar energy engineering, Structure and structure elements, Electronic display devices, Road vehicles in general, Electronic tubes, Products of the chemical industry, Organic chemicals, Road vehicle systems, Noise with respect to human beings, Protective equipment, Construction materials, Elements of buildings, Materials for aerospace construction, Radiation measurements, Protection of and in buildings, Non-destructive testing, Components for aerospace construction, Fuels, Animal feeding stuffs, Water quality, Paper products, Graphic technology.


Korean Agency for Technology and Standards (KATS), transmission edge

  • KS C 7515-2003 Reflector lamps
  • KS B ISO 8478:2006 Photography Camera lenses - Measurement of ISO spectral transmittance
  • KS B ISO 8478-2023 Photographic camera lens ISO spectral transmittance measurement
  • KS L 2514-2011 Testing method on transmittance and emittance of heat glasses and evaluation of solar heat gain coefficient
  • KS B ISO 8599:2004 Optics and optical instruments-Contact lenses-Determination of the spectral and luminous transmittance
  • KS B ISO 8599:2014 Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance
  • KS P ISO 9913-1-2014(2019) Optics and optical instruments — Contact lenses — Part 1: Determination of oxygen permeability and transmissibility with the polarographic method
  • KS B ISO 12239:2021 Smoke alarms using scattered light, transmitted light or ionization
  • KS M ISO 13468-1:2007 Plastics-Determination of the total luminous transmittance of transparent materials-Part 1:Single beam instrument
  • KS M ISO 13468-2:2007 Plastics-Determination of the total luminous transmittance of transparent materials-Part 2:Double-beam instrument
  • KS M ISO 22891:2014 Paper — Determination of transmittance by diffuse reflectance mesurement
  • KS M ISO 22891:2020 Paper — Determination of transmittance by Paper — Determination of transmittance by
  • KS M ISO 13468-1-2007(2017) Plastics-Determination of the total luminous transmittance of transparent materials-Part 1:Single beam instrument
  • KS P ISO 9913-2-2014(2019) Optics and optical instruments — Contact lenses — Part 2: Determination of oxygen permeability and transmissibility by the coulometric method
  • KS B ISO 15368-2006(2016) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
  • KS B ISO 15368-2006(2021) Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
  • KS R 5037-1975(2011) Light extinction type smokemeters for measuring automotive diesel exhaust
  • KS B ISO 7240-7:2020 Fire detection and alarm systems — Part 7:Point-type smoke detectors using scattered light, transmitted light or ionization
  • KS B ISO 7240-7:2007 Fire detection and alarm systems-Part 7:Point-type smoke detectors using scattered light, transmitted light or ionization
  • KS M ISO 5350-2:2007 Pulps-Estimation of dirt and shives-Part 2:Inspection of mill sheeted pulp by transmitted light
  • KS M ISO 5350-2:2017 Pulps-Estimation of dirt and shives-Part 2:Inspection of mill sheeted pulp by transmitted light
  • KS D ISO TR 17270:2007 Microbeam analysis-Analytical transmission electron microscopy-Technical report on the determination of the experimental parameters for electron energy loss spectroscopy

German Institute for Standardization, transmission edge

  • DIN 1349-1:1972 Transmisson of optical radiation; optical clear (nonscattering) media, quantities, symbols and units
  • DIN 4522-4:1993 Photographic lenses; method for measuring the spectral transmittance
  • DIN EN ISO 13468-1:1997 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996); German version EN ISO 13468-1:1996
  • DIN 58141-2:2012-09 Measurement of fiber optic elements - Part 2: Determination of spectral transmittance of light guides; Text in German and English
  • DIN EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) English version of DIN EN ISO 13468-2:2006-07
  • DIN 58141-2:1989 Testing of fibre optic elements; determination of spectral transmittance of light guides
  • DIN 1349-1:1972-06 Transmisson of optical radiation; optical clear (nonscattering) media, quantities, symbols and units
  • DIN 58141-2:2012 Measurement of fiber optic elements - Part 2: Determination of spectral transmittance of light guides; Text in German and English
  • DIN 1349-2:1975 Transmission of optical radiation; turbid media, definitions
  • DIN EN ISO 13697:2006-08 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006); German version EN ISO 13697:2006
  • DIN 4512-8:1993 Photographic sensitometry, determination of optical density; geometric conditions for transmission density
  • DIN EN 1557:1997-03 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission; German version EN 1557:1996
  • DIN EN 170:2003-01 Personal eye protection - Ultraviolet filters - Transmittance requirements and recommended use; German version EN 170:2002
  • DIN EN 2155-5:1989 Aerospace series; test methods for transparent materials for aircraft glazing; part 5: determination of visible light transmission; german version EN 2155-5:1989
  • DIN EN 169:2003 Personal eye protection - Filters for welding and related techniques - Transmittance requirements and recommended use; German version EN 169:2002
  • DIN EN 13363-2 Berichtigung 1:2007 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method; German version EN 13363-2:2005, Corrigenda to DIN EN 13363-2:2005-06; German version EN 13363-2
  • DIN 6868-160:2011 Image quality assurance in diagnostic X-ray departments - Part 160: Quality requirements for diagnostic non-transparent X-ray pictures in dental radiology
  • DIN EN 54-7:2006 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization (includes Amendments A1:2002+A2:2006) English version of DIN EN 54-7:2006-09
  • DIN EN 62805-2:2018 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance (IEC 62805-2:2017); German version EN 62805-2:2017
  • DIN EN 54-7:2018 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point smoke detectors that operate using scattered light, transmitted light or ionization
  • DIN EN 54-7:2018-10 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point smoke detectors that operate using scattered light, transmitted light or ionization; German version EN 54-7:2018
  • DIN EN 13363-1:2007 Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method(includes Amendment A1:2007) English version of DIN EN 13363-1:2007-09
  • DIN ISO 14490-5:2023-07 Optics and photonics - Test methods for telescopic systems - Part 5: Test methods for transmittance (ISO 14490-5:2021); Text in German and English / Note: Date of issue 2023-06-23*Intended as replacement for DIN ISO 14490-5 (2018-05).
  • DIN ISO 14490-5:2023-11 Optics and photonics - Test methods for telescopic systems - Part 5: Test methods for transmittance (ISO 14490-5:2021)
  • DIN EN ISO 8980-3:2022-10 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:2022); German version EN ISO 8980-3:2022
  • DIN EN 169:2003-02 Personal eye protection - Filters for welding and related techniques - Transmittance requirements and recommended use; German version EN 169:2002
  • DIN ISO 14490-5:2018 Optics and photonics - Test methods for telescopic systems - Part 5: Test methods for transmittance (ISO 14490-5:2017)
  • DIN EN 170:2003 Personal eye protection - Ultraviolet filters - Transmittance requirements and recommended use; German version EN 170:2002
  • DIN EN 171:2002 Personal eye protection - Infrared filters - Transmittance requirements and recommended use; German version EN 171:2002
  • DIN EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006) English version of DIN EN ISO 13697:2006-08
  • DIN EN ISO 12625-16:2015-05 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015); German version EN ISO 12625-16:2015
  • DIN EN ISO 11431:2003 Building construction - Jointing products - Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass (ISO 11431:2002); German version EN ISO 11431:2002
  • DIN EN ISO 8980-3:2021 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO/DIS 8980-3:2021); German and English version prEN ISO 8980-3:2021
  • DIN EN 60793-1-46:2002 Optical fibres - Part 1-46: Measurement methods and test procedures; Monitoring of changes in optical transmittance (IEC 60793-1-46:2001); German version EN 60793-1-46:2002

VN-TCVN, transmission edge

  • TCVN 7737-2007 Glass in building.Method for determination of light transmittance, light reflectance, total solar energy transmittance and ultraviolet transmittance
  • TCVN 5083-1990 Personal eye-protectors for welding and related techniques.Filters.Utilisation and transmittance requirements

European Committee for Standardization (CEN), transmission edge

  • prEN 410-1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing characteristics
  • EN ISO 8599:1996 Optics and Optical Instruments - Contact Lenses - Determination of the Spectral and Luminous Transmittance ISO 8599 : 1994
  • EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:2021)
  • EN ISO 13468-1:2019 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:2019)
  • EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument
  • EN ISO 13468-1:1996 Plastics - Determination of Total Luminous Transmittance of Transparent Materials - Part 1: Single-Beam Instrument ISO 13468-1: 1996
  • EN 171:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
  • EN 170:2002 Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use
  • EN 2155-5:1989 Test Methods for Transparent Materials for Aircraft Glazing Part 5: Determination of Visible Light Transmission
  • EN 54-7:1988 Components of Automatic Fire Detection Systems - Part 7: Point-Type Smoke Detectors; Detectors Using Scattered Light, Transmitted Light or Ionization
  • EN 54-7:2018 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point smoke detectors that operate using scattered light@ transmitted light or ionization
  • EN 54-7:1982 Components of automatic fire detection systems; Part 7: Point type smoke detectors; Detectors using scattered light, transmitted light or ionization
  • EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
  • prEN ISO 12625-16 rev Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) — Diffuse reflectance method
  • EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method
  • prEN ISO 8980-3:2021 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO/DIS 8980-3:2021)

国家市场监督管理总局、中国国家标准化管理委员会, transmission edge

  • GB/T 2680-2021 Glass in building—Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
  • GB/T 24328.12-2020 Tissue paper and tissue products—Part 12: Determination of optical properties—Determination of opacity—Diffuse reflectance method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, transmission edge

  • GB/T 2680-1994 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors
  • GB/T 7962.12-2010 Test methods of colourless optical glass.Part 12:Spectral internal transmittance
  • GB/T 5433-2008 Test method for the transmittance of domestic glass
  • GB/T 18873-2002 General specification of transmission electron microscope(TEM)--X-ray energy dispersive spectrum(EDS) quantitative microanalysis for thin biological specimens
  • GB/T 18873-2008 General guide of transmission electron microscope (TEM)-X-ray energy dispersive spectrometry (EDS) quantitative microanalysis for thin biological specimens
  • GB/T 17507-2008 General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope
  • GB/T 25968-2010 Test methods of solar transmittance and solar absorptance of materials by spectrophotometer

International Organization for Standardization (ISO), transmission edge

  • ISO 8478:1996 Photography - Camera lenses - Measurement of ISO spectral transmittance
  • ISO 9050:2003 Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
  • ISO 9050:1990 Glass in building; determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and related glazing factors
  • ISO 8478:2017 Optics and photonics - Camera lenses - Measurement of ISO spectral transmittance
  • ISO 8599:1994 Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance
  • ISO 13468-2:1999 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument
  • ISO 13468-1:1996 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument
  • ISO 12239:2021 Smoke alarms using scattered light, transmitted light or ionization
  • ISO 12239:2010 Smoke alarms using scattered light, transmitted light or ionization
  • ISO 19012-3:2015 Microscopes - Designation of microscope objectives - Part 3: Spectral transmittance
  • ISO 11315-3:1999 Photography - Projection in indoor rooms - Part 3: Classification of transmitting projection screens and measurement of their transmitted luminance levels
  • ISO 26723:2020 Plastics — Determination of total luminous transmittance and reflectance
  • ISO 15368:2021 Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
  • ISO 13142:2021 Optics and photonics — Lasers and laser-related equipment — Cavity ring-down method for high-reflectance and high-transmittance measurements
  • ISO/PRF 7240-7 Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
  • ISO 7240-7:2023 Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
  • ISO 13837:2008 Road vehicles - Safety glazing materials - Method for the determination of solar transmittance
  • ISO 4851:1979 Personal eye-protectors; Ultra-violet filters; Utilisation and transmittance requirements
  • ISO 4852:1978 Personal eye-protectors; Infra-red filters; Utilisation and transmittance requirements
  • ISO 7240-7:2003 Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
  • ISO 7240-7:2018 Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
  • ISO 7240-7:2011 Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
  • ISO 14490-5:2017 Optics and photonics - Test methods for telescopic systems - Part 5: Test methods for transmittance
  • ISO 4850:1979 Personal eye-protectors for welding and related techniques; Filters; Utilisation and transmittance requirements
  • ISO 14490-5:2005 Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance
  • ISO 17861:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method of spectral transmittance of fine ceramics thin films under humid condition
  • ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
  • ISO 25498:2018 Microbeam analysis - Analytical electron microscopy - Selected area electron diffraction analysis using a transmission electron microscope
  • ISO 8980-3:2022 Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods
  • ISO 7240-12:2022 Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam
  • ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
  • ISO 14490-5:2005/Amd 1:2015 Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance; Amendment 1
  • ISO 14490-5:2021 Optics and optical instruments — Test methods for telescopic systems — Part 5: Test methods for transmittance — Amendment 1
  • ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method
  • ISO 8980-3:2022/AWI Amd 1:2011 Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods — Amendment 1
  • ISO 11431:2002 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass

Professional Standard - Machinery, transmission edge

  • JB/T 8248.1-1999 Method for determining the spectral transmissivity of camera lenses

KR-KS, transmission edge

  • KS B 5426-2023 Method for measuring spectral transmittance of a photographic lenses
  • KS B ISO 12239-2021 Smoke alarms using scattered light, transmitted light or ionization
  • KS M ISO 22891-2020 Paper — Determination of transmittance by Paper — Determination of transmittance by
  • KS B ISO 7240-7-2020 Fire detection and alarm systems — Part 7:Point-type smoke detectors using scattered light, transmitted light or ionization
  • KS D ISO TR 17270-2007 Microbeam analysis-Analytical transmission electron microscopy-Technical report on the determination of the experimental parameters for electron energy loss spectroscopy

Association of German Mechanical Engineers, transmission edge

British Standards Institution (BSI), transmission edge

  • BS EN ISO 13468-1:1997 Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument
  • BS ISO 19012-3:2015 Microscopes. Designation of microscope objectives. Spectral transmittance
  • BS ISO 8478:2017 Optics and photonics. Camera lenses. Measurement of ISO spectral transmittance
  • 18/30352698 DC BS IEC 63085. Radiation protection instrumentation. System of spectral identification of liquids in transparent and semitransparent containers
  • BS ISO 12239:2021 Smoke alarms using scattered light, transmitted light or ionization
  • BS EN ISO 13468-2:1999 Plastics - Determination of the total luminous transmittance of transparent materials - Double-beam instrument
  • BS EN ISO 13468-2:2021 Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
  • BS IEC 63085:2021 Radiation protection instrumentation. System of spectral identification of liquids in transparent and semitransparent containers (Raman systems)
  • BS ISO 14807:2001 Photography - Transmission and reflection densitometers - Method for determining performance
  • BS ISO 26723:2020 Plastics. Determination of total luminous transmittance and reflectance
  • BS EN 62805-2:2017 Method for measuring photovoltaic (PV) glass. Measurement of transmittance and reflectance
  • BS EN 2155-5:1989 Specification for test methods for transparent materials for aircraft glazing - Determination of visible light transmission
  • BS IEC 61747-30-5:2019 Liquid crystal display devices - Optical measuring methods of transmissive transparent LCD modules
  • BS ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
  • 19/30368985 DC BS ISO 26723. Plastics. Determination of total luminous transmittance and reflectance
  • 20/30352222 DC BS ISO 15368. Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
  • BS ISO 15368:2021 Tracked Changes. Optics and photonics. Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
  • BS EN 60793-1-46:2002 Optical fibres - Measurement methods and test procedures - Monitoring of changes in optical transmittance
  • BS EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules. Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
  • BS EN 62788-1-4:2016+A1:2020 Measurement procedures for materials used in photovoltaic modules - Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
  • 22/30405472 DC Fire detection and alarm systems - Part 7. Point-type smoke detectors using scattered light, transmitted light or ionization
  • BS ISO 13837:2008 Road vehicles. Safety glazing materials. Method for the determination of solar transmittance
  • 20/30384001 DC BS ISO 13142. Optics and photonics. Lasers and laser-related equipment. Cavity ring-down method for high-reflectance and high-transmittance measurements
  • BS ISO 14490-5:2006 Optics and optical instruments - Test methods for telescopic systems - Test methods for transmittance
  • BS EN 54-7:2001 Fire detection and fire alarm systems - Smoke detectors - Point detectors using scattered light, transmitted light or ionization
  • BS EN ISO 8980-3:1999 Ophthalmic optics - Uncut finished spectacle lenses - Transmittance specifications and test methods
  • BS EN 170:2003 Personal eye-protection - Ultraviolet filters.Transmittance requirements and recommended use
  • 17/30347208 DC BS ISO 7240-7. Fire detection and alarm systems. Part 7. Point-type smoke detectors using scattered light, transmitted light or ionization
  • BS EN 171:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
  • 18/30387052 DC BS EN 62788-1-4 AMD1. Measurement procedures for materials used in photovoltaic modules. Part 1-4. Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
  • BS EN ISO 12625-16:2015 Tissue paper and tissue products. Determination of optical properties. Opacity (paper backing). Diffuse reflectance method
  • BS ISO 17861:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of spectral transmittance of fine ceramics thin films under humid condition
  • BS ISO 25498:2010 Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope
  • BS EN 54-7:2018 Tracked Changes. Fire detection and fire alarm systems. Smoke detectors. Point smoke detectors that operate using scattered light, transmitted light or ionization
  • 23/30469798 DC BS EN IEC 60793-1-46. Optical fibres - Part 1-46. Measurement methods and test procedures. Monitoring of changes in optical transmittance
  • BS EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
  • BS EN 13363-2:2005 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Detailed calculation method
  • BS EN 13363-2:2005(2006) Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Detailed calculation method
  • 13/30280603 DC BS ISO 7240-12. Fire detection and alarm systems. Part 12. Line type smoke detectors using a transmitted optical beam
  • 21/30405481 DC BS ISO 7240-12. Fire detection and alarm systems - Part 12. Line type smoke detectors using a transmitted optical beam

AT-ON, transmission edge

  • ONORM EN 379-1994 Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance
  • ONORM EN 54 Teil.7-1989 Components of automatic fire detection Systems; point type smoke detectors; detectors using scattered light, transmitted light or ionization
  • OENORM EN ISO 8980-3:2021 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO/DIS 8980-3:2021)

Japanese Industrial Standards Committee (JISC), transmission edge

  • JIS B 7107:1997 Photography -- Camera lenses -- Measurement of ISO spectral transmittance
  • JIS K 7375:2008 Plastics -- Determination of total luminous transmittance and reflectance
  • JIS R 1694:2012 Measurement of spectral transmittance of fine ceramic thin films under humid condition
  • JIS B 7158-3:2017 Microscopes -- Designation of microscope objectives -- Part 3: Spectral transmittance
  • JIS K 7361-1:1997 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single beam instrument
  • JIS B 7144:1995 Microscope -- Connection of condensers for transmitted light with substage sleeves
  • JIS R 1635:1998 Test method for visible light transmittance of fine ceramic thin films
  • JIS T 7333:2018 Ophthalmic optics -- Uncut finished spectacle lenses -- Transmittance specifications and test methods
  • JIS T 7333:2005 Ophthalmic optics -- Uncut finished spectacle lenses -- Transmittance specifications and test methods

ES-UNE, transmission edge

  • UNE 40610:2020 Agrotextiles. Determination of transmittance: Direct and diffuse light
  • UNE-EN 62805-2:2017 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance (Endorsed by Asociación Española de Normalización in October of 2018.)
  • UNE-EN 60793-1-46:2002 Optical fibres -- Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance (Endorsed by AENOR in July of 2002.)
  • UNE-EN 62788-1-4:2017/A1:2021 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
  • UNE-EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
  • UNE-EN 54-7:2019 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point smoke detectors that operate using scattered light, transmitted light or ionization
  • UNE-EN ISO 8980-3:2023 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:2022)
  • UNE-EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
  • ISO/DIS 12625-16:2023 Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method

Association Francaise de Normalisation, transmission edge

  • NF S11-687:1997 Optics and optical instruments. Contact lenses. Determination of the spectral and luminous transmittance.
  • NF T51-065-2*NF EN ISO 13468-2:2021 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2 : double-beam instrument
  • NF T51-065-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2 : double-beam instrument.
  • NF T51-065:1996 Plastics. Determination of the total luminous transmittance of transparent materials. Part 1 : single-beam instrument.
  • NF S10-114*NF EN ISO 13697:2006 Optics and phonotics - Lasers and laser-related equipment - Test methods for specular reflectance and transmittance of optical laser components.
  • NF S10-049*NF ISO 15368:2021 Optics and photonics - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
  • NF ISO 15368:2021 Optique et photonique - Mesurage du facteur de réflexion des surfaces planes et du facteur de transmission des éléments à plan parallèle
  • NF C57-805-2*NF EN 62805-2:2017 Method for measuring photovoltaic (PV) glass - Part 2 : Measurement of transmittance and reflectance
  • NF EN 62805-2:2017 Méthode de mesure du verre photovoltaïque (PV) - Partie 2 : mesurage du facteur de transmission et du facteur de réflexion
  • NF Q03-040*NF ISO 2471:2009 Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method.
  • NF EN 62788-1-4/A1:2020 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 1-4 : encapsulants - Mesurage du facteur de transmission optique et calcul du facteur de transmission photonique à pondération solaire, de l'indice de jaunisse...
  • NF EN 62788-1-4:2017 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 1-4 : Encapsulants - Mesurage du facteur de transmission optique et calcul du facteur de transmission photonique à pondération solaire, de l'indice de jaunisse...
  • NF EN ISO 13697:2006 Optique et photonique - Lasers et équipements associés aux lasers - Méthodes d'essai du facteur de réflexion spéculaire et du facteur de transmission des composants optiques laser
  • NF ISO 2471:2009 Papier et carton - Détermination de l'opacité sur fond papier - Méthode de réflexion en lumière diffuse
  • NF S10-049:2003 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements.
  • NF EN ISO 12625-16:2015 Papier tissue et produits tissues - Partie 16 : détermination des propriétés optiques - Opacité sur fond papier - Méthode par réflexion en lumière diffuse
  • NF L17-600-05*NF EN 2155-5:1989 Aerospace industry. Test methods for transparent materials for aircraft glazing. Part 5 : determination of visible light transmission.
  • NF C57-788-1-4*NF EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1 -4 : Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
  • NF S77-106*NF EN 171:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
  • NF S77-106:1992 Personal eye-protection. Infrared fliters. Transmittance requirements and recommanded use.
  • NF EN 60793-1-46:2002 Fibres optiques - Partie 1-46 : méthodes de mesure et procédures d'essai - Contrôle des variations du facteur de transmission optique
  • NF S77-105*NF EN 170:2003 Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use
  • NF Q03-006:1983 Paper and board tests. Measurement of opacity (white paper backing) (diffuse reflectance method).
  • NF EN ISO 5350-2:2006 Pâtes - Estimation des impuretés et bûchettes - Partie 2 : examen des pâtes en feuilles par lumière transmise
  • NF S61-987*NF EN 54-7:2001 Fire detection and fire alarm systems - Part 7 : smoke detectors - Point detectors using scattered light, transmitted light or ionization
  • NF S61-960-7*NF EN 54-7:2018 Fire detection and fire alarm systems - Part 7 : smoke detectors - Point detectors using scattered light, transmitted light or ionization
  • NF EN 1557:1996 Agents de surface - Caractérisation colorimétrique des liquides (produits) colorés optiquement clairs par composantes trichromatiques X, y et Z en transmittance
  • NF C93-840-1-46*NF EN 60793-1-46:2002 Optical fibres - Part 1-46 : measurement methods and test procedures - Monitoring of changes in optical transmittance
  • NF S77-104:1992 Personal eye-protection. Filters for welding and related techniques. Transmittance requirements and recommanded utilisation.
  • NF EN ISO 5350-1:2006 Pâtes - Estimation des impuretés et bûchettes - Partie 1 : examen des feuilles de laboratoire par lumière transmise
  • NF S77-104*NF EN 169:2003 Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use
  • NF S77-105:1992 Personal eye-protection. Ultraviolets filters. Transmittance requirements and recommended use.
  • NF EN ISO 8980-3:2022 Optique ophtalmique - Verres de lunettes finis non détourés - Partie 3 : spécifications relatives au facteur de transmission et méthodes d'essai
  • NF Q34-030-16*NF EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16 : determination of optical properties - Opacity (paper backing) - Diffuse reflectance method
  • NF P85-516*NF EN ISO 11431:2003 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass

未注明发布机构, transmission edge

  • BS EN ISO 8599:1997 Optics and optical instruments — Contact lenses — Determination ofthe spectral and luminous transmittance
  • BS EN 2155-5:1989(1999) Test methods for transparent materials for aircraft glazing — Part 5 : Determination ofvisible light transmission
  • DIN EN 54-7:2001 Fire detection and fire alarm systems – Part 7: Smoke detectors – Point detectors using scattered light, transmitted light or ionization

TIA - Telecommunications Industry Association, transmission edge

Danish Standards Foundation, transmission edge

  • DS/EN 379:1994 Specification for welding filters with switchable luminous transmittance and welding filters with dual luminous transmittance
  • DS/EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
  • DS/EN 2155-5:1989 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 5: Determination of visible light transmission
  • DS/EN 62788-1-4:2020 Measurement procedures for materials used in photovoltaic modules – Part 1-4: Encapsulants – Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
  • DS/EN 1557:1997 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
  • DS/EN 171:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
  • DS/EN 60793-1-46:2002 Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
  • DS/EN ISO 5350-2:2007 Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light
  • DS/EN 170:1993 Personal eye-protection. Ultraviolet filters. Transmittance requirements and recommended use
  • DS/EN 171:1993 Personal eye-protection. Infrared filters. Transmittance requirements and recommended use
  • DS/EN ISO 5350-1:2007 Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light
  • DS/EN 169:2003 Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use
  • DS/EN 169:1993 Personal eye-protection. Filters for welding and related techniques. Transmittance requirements and recommended utilisation
  • DS/EN ISO 8980-3:2005 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods
  • DS/EN ISO 8980-3:2013 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods

American National Standards Institute (ANSI), transmission edge

Professional Standard - Military and Civilian Products, transmission edge

  • WJ 2139-1993 Specification for Transmissive Low Light Resolution Panels

International Electrotechnical Commission (IEC), transmission edge

  • IEC 63085:2021 Radiation protection instrumentation - System of spectral identification of liquids in transparent and semitransparent containers (Raman systems)
  • IEC 62805-2:2017 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance
  • IEC 61747-30-5:2019 Liquid crystal display devices - Part 30-5: Optical measuring methods of transmissive transparent LCD modules
  • IEC TS 62607-6-2:2023 Nanomanufacturing - Key control characteristics - Part 6-2: Graphene - Number of layers: atomic force microscopy, optical transmission, Raman spectroscopy
  • IEC 62788-1-4:2016/AMD1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
  • IEC 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
  • IEC 62788-1-4:2016+AMD1:2020 CSV Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
  • IEC 60793-1-46:2001 Optical fibres - Part 1-46: Measurement methods and test procedures; Monitoring of changes in optical transmittance
  • IEC 61910-1:2014 Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography and radioscopy

PL-PKN, transmission edge

  • PN E04040-05-1986 Photometric and radiometrie measurements Measurenient of reflection factor, transmission factor and luminance factor
  • PN-EN 62788-1-4-2017-02/A1-2021-07 E Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
  • PN C99465-09-1993 Photography. Determination of basic sensitometric values at reflected light for coloured materials on opaque base
  • PN M51004-07-1992 Componcnts of automatic fire detection systems Part 7. Point type smoke detectors Detectors using scattered light, transmitted light or ionization
  • PN C99465-06-1985 Methods for determination of photographic values of light sensitive materials Determination of basie sensitometric values for black-and-white materials on transparent base (film base) exposed by visibie radiation

Professional Standard - Medicine, transmission edge

Military Standard of the People's Republic of China-General Armament Department, transmission edge

American Society for Testing and Materials (ASTM), transmission edge

  • ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
  • ASTM D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM D1494-17 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM D1494-97(2001)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM D1494-97(2001) Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM D1494-12 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM F1252-89(2002) Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
  • ASTM F1252-89(1996) Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
  • ASTM F1252-08 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
  • ASTM E971-88(2003) Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
  • ASTM E971-88(1996)e1 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
  • ASTM E971-11(2019) Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
  • ASTM F1252-21 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
  • ASTM E903-96 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
  • ASTM F1252-10 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
  • ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM F768-82(1987)e1 Method for Specular Reflectance and Transmittance Measurements of Optically Flat-Coated and Non-Coated Specimens
  • ASTM E972-96(2021) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
  • ASTM F1252-16 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
  • ASTM D4093-95 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
  • ASTM E903-12 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
  • ASTM D4093-95(2005)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
  • ASTM D4093-95(2001)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
  • ASTM D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
  • ASTM D4093-95(2010) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
  • ASTM D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
  • ASTM E971-11 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
  • ASTM E1348-22 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E1084-86(2023) Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
  • ASTM E1348-11 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM D589-97 Standard Test Method for Opacity of Paper (15176;Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing)
  • ASTM D589-97(2002) Standard Test Method for Opacity of Paper (15176;Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing)
  • ASTM E387-84(1995)e1 Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method
  • ASTM E387-04 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
  • ASTM E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
  • ASTM E1348-90 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
  • ASTM E1175-87(2022) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
  • ASTM E387-04(2022) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
  • ASTM E387-04(2014) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
  • ASTM E1980-98e1 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
  • ASTM E1980-01 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
  • ASTM E1084-86(1996) Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
  • ASTM E3022-18 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
  • ASTM E1175-87(1996) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
  • ASTM E1175-87(2015) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
  • ASTM D7806-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
  • ASTM D8193-18 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
  • ASTM F2366-05 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
  • ASTM F2366-05(2011) Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
  • ASTM F2366-12 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
  • ASTM E1175-87(2003) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere

Standard Association of Australia (SAA), transmission edge

  • AS 3786:2023 Smoke alarms using scattered light, transmitted light or ionization (ISO 12239:2021, MOD)
  • AS/NZS 4257.4:1994 Plastic roof and wall cladding materials - Methods of test - Determination of diffuse light transmission
  • AS/NZS ISO 8980.3:2015
  • AS 7240.7:2004 Fire detection and alarm systems - Point-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD)
  • AS 7240.7:2018 Fire detection and alarm systems, Part 7: Point type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2018, MOD)
  • AS/NZS 1462.14:1996 Methods of test for PVC pipes and fittings - Method for determination of the light transmission of pipe
  • AS/NZS 4257.7:1994 Plastic roof and wall cladding materials - Methods of test - Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
  • AS 7240.12:2018 Fire detection and alarm systems, Part 12: Line type smoke detectors using a transmitted optical beam (ISO 7240-12:2014, MOD)

RU-GOST R, transmission edge

  • GOST 26302-1993 Glass. Methods of determination of light regular transmittance and light regular reflection
  • GOST 26302-1984 Glass for building purposes. Method for determination of luminous regular transmittance
  • GOST 26302-2021 Glass. Light regular transmittance and light regular reflectance determination methods
  • GOST 24179-1980 Glass filters, filter-lenses, lenses, dispersers and diflecting insertion for railway transport light-signal. Specifications
  • GOST 27794-1988 Black and white photographic materials on opaque base. Conditions for determination of optical density in reflected light
  • GOST R 59742-2021 Optics and photonics. Lasers and laser-related equipment. Optical elements for laser equipment. Test methods for specular reflectance and regular transmittance
  • GOST R IEC 60793-1-46-2014 Optical fibres. Part 1-46. Measurement methods and test procedures. Monitoring of changes in optical transmittance
  • GOST 8.559-1993 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the optical density of materials in transmitted light
  • GOST R 57543-2017 Feedstuffs, compound feeds, feed raw materials. Method for determination of crude protein, crude fiber, crude fat and moisture using spectroscopy in the near-in-infrared region measurement mode transmission spectra
  • GOST 8.557-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the spectral, integral and reduced regular transmittance and optical density within the wavelength range from 0,2 to 50,0 um, diffused and regular re
  • GOST 8.557-1991 State system for ensuring the uniformity of measurements. State verification schedule for measuring means of spectral, integral and reduced regular transmissivities within the wavelength ranges of 0.2-50.0 um, diffused and mirror reflections within the w

Taiwan Provincial Standard of the People's Republic of China, transmission edge

  • CNS 10472-1995 Method of Test for Foreign Particulate Matter in Pulp by Transmitted Light
  • CNS 12381-1988 Method of Test on Transmittance and Reflectance for Daylight and Solar Radiation and Solar Heat Gain Coefficient of Flat Glass
  • CNS 11705-1986 Method of Test for Fiber Devices (FOTP-20 Change of Optical Transmittance)

Group Standards of the People's Republic of China, transmission edge

RO-ASRO, transmission edge

  • STAS 10138-1975 PENETRANT RADIATION TESTING Guidances for radiographs viewing
  • STAS 10949-1977 DETERMINATION OF OPTICAL DENSITY BY REFLE-, XION .OF IMAGES ON OPAQUE SUPPORTS

GOSTR, transmission edge

  • GOST R 57696-2017 Polymer composites. Method for determination of diffuse light transmission factor of building panels
  • PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry

European Committee for Electrotechnical Standardization(CENELEC), transmission edge

  • EN 62805-2:2017 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance
  • EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
  • EN 60793-1-46:2002 Optical Fibres Part 1-46: Measurement Methods and Test Procedures - Monitoring of Changes in Optical Transmittance

Professional Standard - Building Materials, transmission edge

  • JC/T 782-2017 Test method for visible transmittance of glass fiber reinforced plastic

Professional Standard - Petroleum, transmission edge

  • SY/T 5125-2014 Method of identification microscopically the macerals of kerogen and indivision the kerogen type by transmitted-light and fluorescence
  • SY/T 5125-1996 Transmitted light-fluorescence kerogen identification and type classification method
  • SY 5125-2014 Transmitted light-fluorescence kerogen identification and type classification method

FI-SFS, transmission edge

Professional Standard - Electron, transmission edge

  • SJ/T 10938-1996 Methods of measurement for light transmissivity (τ546) for color picture tube glass panel

AENOR, transmission edge

  • UNE-EN 2155-5:1992 AEROSPACE SERIES. TEST METHODS FOR TRANSPARENT MATERIALS FOR AIRCRAFT GLAZING. PART 5: DETERMINATION OF VISIBLE LIGHT TRANSMISSION.
  • UNE-EN 1557:1997 SURFACE ACTIVE AGENTS. COLORIMETRIC CHARACTERIZATION OF OPTICALLY CLEAR COLOURED LIQUIDS (PRODUCTS) AS X, Y, Z TRISTIMULUS VALUES IN TRANSMISSION.
  • UNE-EN 171:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use.
  • UNE-EN ISO 13697:2007 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)
  • UNE-EN 54-7/A1:2002 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization.
  • UNE-EN 54-7:2001 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization.
  • UNE-EN 54-7:2001/A2:2007 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
  • UNE-EN ISO 5350-2:2007 Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light (ISO 5350-2:2006)
  • UNE-EN ISO 5350-1:2007 Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light (ISO 5350-1:2006)
  • UNE-EN ISO 8980-3:2014 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:2013)

Lithuanian Standards Office , transmission edge

  • LST EN 1557-2002 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
  • LST EN 171-2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
  • LST EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)
  • LST EN 181102-2001 Blank detail specification. Fibre optic branching devices. Type: Wavelength selective transmissive star
  • LST EN 181101-2001 Blank detail specification. Fibre optic branching devices. Type: Non wavelength selective transmissive star
  • LST EN 62788-1-4/A1-2021 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength (IEC 62788-1-4:2016/A
  • LST EN 169-2003 Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use
  • LST EN 60793-1-46-2003 Optical fibres. Part 1-46: Measurement methods and test procedures. Monitoring of changes in optical transmittance (IEC 60793-1-46:2001)
  • LST EN ISO 5350-2:2006 Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light (ISO 5350-2:2006)
  • LST EN 181104-2001 Blank detail specification. Fibre optic branching devices. Type: Wavelength selective transmissive star for telecommunication application
  • LST EN 181103-2001 Blank detail specification. Fibre optic branching devices. Type: Non wavelength selective transmissive star for telecommunication application
  • LST EN ISO 5350-1:2006 Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light (ISO 5350-1:2006)
  • LST EN ISO 8980-3:2005 Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:2004)

ZA-SANS, transmission edge

  • SANS 6154:2006 Glass content of granulated metallurgical slag (transmitted-light microscopy method)
  • SANS 50054-7:2000 Fire detection and fire alarm systems Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
  • SANS 50169:1992 Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended utilisation

Shandong Provincial Standard of the People's Republic of China, transmission edge

  • DB37/T 4166-2020 Requirements and test methods for blue light transmittance of anti-blue light glasses lenses and related eyewear products

Guangdong Provincial Standard of the People's Republic of China, transmission edge

  • DB44/T 2034-2017 Requirements and test methods for blue light transmittance of anti-blue light glasses lenses and related eyewear products

BE-NBN, transmission edge

  • NBN-EN 170-1993 Personal eye-protection. Ultraviolet filters. Transmittance requirements and recommended use
  • NBN-EN 171-1993 Personal eye-protection. Infrared filters. Transmittance requirements and recommended use
  • NBN-EN 169-1993 Personal eye-protection. Filters for welding and related techniques. Transmittance requirements and recommended utilisation

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, transmission edge

  • PREN 2155-5-1984 Test Methods for Transparent Materials for Aircraft Glazing Part 5 - Determination of Visible Light Transmission Aerospace Series (Edition 1)
  • PREN 2155-4-2000 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 4 - Determination of Ultraviolet Light Transmission over Wavelength Range 280 nm to 360 nm (Edition P 1)

Aerospace Industries Association/ANSI Aerospace Standards, transmission edge

SE-SIS, transmission edge

  • SIS SS-EN 54/7-1986 Components of automatic fire detection systems - Part 7: Point type smoke detectors - Detectors using scattered light transmitted light or ionization

CH-SNV, transmission edge

Aerospace, Security and Defence Industries Association of Europe (ASD), transmission edge

  • ASD-STAN PREN 2155-5-1984 Test Methods for Transparent Materials for Aircraft Glazing Part 5 - Determination of Visible Light Transmission Aerospace Series (Edition 1)
  • ASD-STAN PREN 2155-4-2000 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 4 - Determination of Ultraviolet Light Transmission over Wavelength Range 280 nm to 360 nm (Edition P 1)

Society of Automotive Engineers (SAE), transmission edge

  • SAE J576-2007 Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices
  • SAE J576-2010 Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices
  • SAE J576-1991 Plastic Materials for Use in Optical Parts Such as Lenses and reflectors of Motor Vehicle Lighting Devices
  • SAE J576-1986 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES
  • SAE J576-1981 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES
  • SAE J576D-1976 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES
  • SAE ARP1611A-1995 Quality Inspection Procedure, Composites Tracer Fluoroscopy and Radiography
  • SAE J576B-1966 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS, SUCH AS LENSES AND REFLECTORS, OF MOTOR VEHICLE LIGHTING DEVICES
  • SAE J576-1960 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS, SUCH AS LENSES AND REFLECTORS, OF MOTOR VEHICLE LIGHTING DEVICES
  • SAE J576A-1963 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS, SUCH AS LENSES AND REFLECTORS, OF MOTOR VEHICLE LIGHTING DEVICES
  • SAE J576C-1970 Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices

(U.S.) Telecommunications Industries Association , transmission edge

  • TIA-455-244-2011 Methods for Measuring the Change in Transmittance of Optical Fibers in Expressed Buffer Tubes When Subjected to Temperature Cycling
  • TIA-455-20-B-2004(2013) FOTP-20 IEC 60793-1-46: Optical Fibres- Part 1- 46: Measurement Methods and Test Procedures- Monitoring of Changes in Optical Transmittance
  • TIA-455-20-B-2004 FOTP-20 IEC 60793-1-46: Optical Fibres- Part 1- 46: Measurement Methods and Test Procedures- Monitoring of Changes in Optical Transmittance

SAE - SAE International, transmission edge

  • SAE J576-2017 PLASTIC MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES

BR-ABNT, transmission edge

  • ABNT NBR ISO 8980-3:2012 Ophthalmic optics - Spectacle lenses and finished uncut Part 3: transmittance specifications and test methods

BELST, transmission edge

  • STB 8062-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Measures of coefficients of directed transmittance, diffuse and specular reflections, optical density, color coordinates and chromaticity. Methods of verification




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved