ZH
RU
ES
thermal rotation principle
thermal rotation principle, Total:354 items.
In the international standard classification, thermal rotation principle involves: Rotating machinery, Plastics, Paper and board, Crude petroleum, Electrical wires and cables, Coatings and related processes used in aerospace industry, Electrical accessories, Nuclear energy engineering, Springs, Thermodynamics and temperature measurements, Industrial furnaces, Construction materials, Products of non-ferrous metals, Shipbuilding and marine structures in general, Fluid power systems, Rubber and plastics products, Materials for aerospace construction, Products of the chemical industry, Analytical chemistry, Insulation, Measurement of volume, mass, density, viscosity, Pipeline components and pipelines, Medical equipment, Rubber, Vocabularies, Quantities and units, Protection of and in buildings, Aerospace fluid systems and components, Fasteners, Fluid storage devices, Wastes, Energy and heat transfer engineering in general, Metalliferous minerals, Kitchen equipment, Industrial automation systems, Medical sciences and health care facilities in general, Surface treatment and coating, Aerospace engines and propulsion systems, Road engineering, Seals, glands, Equipment for entertainment, Water quality, Welding, brazing and soldering, Iron and steel products, Waxes, bituminous materials and other petroleum products, Heat treatment, Heat pumps, Refrigerating technology, Integrated circuits. Microelectronics, Shafts and couplings, Switchgear and controlgear, Petroleum products in general, Ergonomics.
Indonesia Standards, thermal rotation principle
- SNI 04-1632-1989 Thermal protection system for rotating electrical machinery, Performance
- SNI IEC 60034-11:2011 Rotating electrical machines - Part 11: Thermal protection
- SNI 05-3217-1992 Prevailing torque type steel hexagon locknuts. Mechanical and performance properties
SE-SIS, thermal rotation principle
- SIS SEN 01 25 32-1968 Symbols jor electrical diagrams Rotating machines
- SIS SEN 01 25 33-1968 Symbols for electrical diagrams Current sources, generators, non-rotating
- SIS SEN 01 27 15-1968 Symbols for electrical diagrams Telecommunication switching equipment
- SIS SS IEC 467:1986 Rotating electrical machines - Test procedures for determining physical properties ofcarbon brus hes
- SIS SS IEC 413:1986 Rotating electrical machmes - Testprocedures for determining physical properties of brush materials
- SIS SS IEC 617-6:1986 Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy
- SIS SS IEC 613:1986 X-ray equipment - Electrical. thermal and loading characteristics of rotating anode X-ray tu bes for medical diagnosis
- SIS SS-EN 60 613-1991 X-ray equipment - Electrical, thermal and loading characteristics ef rota?ng anode X-ray tubes for medical diagnosis
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, thermal rotation principle
- GB/T 13002-2008 Rotating electrical machines.Thermal protection
- GB/T 13002-2022 Rotating electrical machines—Thermal protection
- GB/T 13002-1991 Built-in thermal protection for rotating electrical machines.Rules for protection of rotating electrical machines
- GB/T 21205-2022 Rotating electrical machines—Repair, overhaul and reclamation
- GB/T 12351-1990 Enviromental technical requirements of rotating electric machines for tropical use
- GB/T 12351-2008 Environmental technical requirements of rotating electric machines for tropical use
- GB/T 24297-2009 The test method for thermal deflection rate of spiral and helix coils of thermostat bimetal
- GB 13232-1991 Built-in thermal protection for rotating electrical machines--General rules for thermal protectors
- GB/T 41602-2022 Food processing equipment—Combined equipment—Rotary rack ovens
- GB/T 13599-1992 Built-in thermal protection for rotation electrical machines--Thermal detectors and control units used in thermal protection systems
- GB/T 18175-2000 Determination of corrosion inhibition performance of water treatment agents-Rotation specimen method
- GB/T 18175-2014 Determination of corrosion inhibition performance of water treatment agents.Rotation specimen method
- GB/T 24272-2009 Test method for mechanical torque rate of spiral coils of thermostat metal
- GB/T 24241-2009 Direct reduced iron.Determination of the tumble and abrasion indices of hot briquetted iron(HBI)
- GB/T 14152-2001 Thermoplastics pipes-Determination of resistance to external blows-Round-the-clock method
- GB 11515-1989 Diagnostic criteria and principles of management of metal fumr fever
- GB/T 33967-2017(英文版) Wire rods for conversion to wire without intermediate heat treatment
- GB/T 21283.2-2007 Rotary shaft lip-type seals incorporating thermoplastic sealing elements-Part 2:Vocabulary
- GB/T 9867-2008 Rubber,vulcanized or thermoplastic.Determination of abrasion resistance using a rotating cylindrical drum device
- GB/T 17948.1-2000 Rotating electrical machines-Functional evaluation of insulation systems Test procedures for wire-wound windings-Thermal evaluation and classification
- GB/T 17948.1-2018 Rotating electrical machines.Functional evaluation of insulation systems.Test procedures for wire-wound windings.Thermal evaluation and classification
Standard Association of Australia （SAA）, thermal rotation principle
PL-PKN, thermal rotation principle
- PN E06711-01-1992 Rotating electrical machines Built-in thermal protection Rules for protection of rotating electrical machines
- PN-EN ISO 3219-2-2021-10 E Rheology -- Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
- PN G61014-1986 Rotary drillings of normal diameters Constant pulley blocks Principal requirements
- PN E06738-1992 Rotating electrical machines. Test procedures for determining physical properties of brush materials
Association Francaise de Normalisation, thermal rotation principle
- NF EN ISO 3219-2:2021 Rhéologie - Partie 2 : principes généraux de la rhéométrie rotative et oscillatoire
- NF T51-211-2*NF EN ISO 3219-2:2021 Rheology - Part 2 : general principles of rotational and oscillatory rheometry
- NF C51-311*NF EN 60034-11:2005 Rotating electrical machines - Part 11 : thermal protection
- NF EN 60034-11:2005 Machines électriques tournantes - Partie 11 : protection thermique
- FD S99-513*FD ISO/TR 21582:2021 Pyrogenicity - Principles and methods for pyrogen testing of medical devices
- FD ISO/TR 21582:2021 Pyrogénicité - Principes et méthodes d'essai pour la recherche des pyrogènes sur les dispositifs médicaux
- NF P50-743:1996 Thermal insulation. Mass transfer. Physical quantities and definitions.
- NF M87-249-2*NF EN ISO 10424-2:2011 Petroleum and natural gas industries - Rotary drilling equipment - Part 2 : threading and gauging of rotary shouldered thread connections
- NF C74-114:1992 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis.
- NF C51-318-31*NF EN 60034-18-31:2012 Rotating electrical machines - Part 18-31 : Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
- NF T46-012*NF ISO 4649:2018 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
- NF EN 60034-18-31:2012 Machines électriques tournantes - Partie 18-31 : évaluation fonctionnelle des systèmes d'isolation - Procédures d'essai pour enroulements préformés - Évaluation thermique et classification des systèmes d'isolation utilisés dans les machines...
- NF EN 13341+A1:2011 Réservoirs statiques en thermoplastiques destinés au stockage non enterré de fioul domestique de chauffage, de pétrole lampant et de gazole - Réservoirs en polyéthylène moulés par soufflage et par rotation et réservoirs moulés par rotation fa...
- NF EN 13341/IN1:2011 Réservoirs statiques en thermoplastiques destinés au stockage non enterré de fioul domestique de chauffage, de pétrole lampant et de gazole - Réservoirs en polyéthylène moulés par soufflage et par rotation et réservoirs moulés par rotation fa...
European Committee for Standardization (CEN), thermal rotation principle
- EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
- EN ISO 3127:2017 Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
- EN 4551:2014 Aerospace series - Pipe coupling@ 37��in heat resisting steel - Swivel nuts - Inch series
- EN 60613:1990 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis
- HD 53.2 S1-1982 Rotating electrical machines; part 2: methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicules); first supplement: measurement of losses by the calorimetric method
- EN 54-7:1988/A1:1988 Components of automatic fire detection systems; Part 7: Point type smoke detectors; Detectors using scattered light, transmitted light or ionization
- EN 54-7:1988/prA2:1989 Components of automatic fire detection systems; part 7: point-type smoke detectors; detectors using scattered light, transmitted light or ionization
- EN 54-7:1982/AC1:1984 Components of automatic fire detection systems; Part 7: Point type smoke detectors; Detectors using scattered light, transmitted light or ionization
- EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of Polymers - General Principles ISO 11358: 1997
International Organization for Standardization (ISO), thermal rotation principle
- ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry
- ISO/TR 21582:2021 Pyrogenicity — Principles and methods for pyrogen testing of medical devices
- ISO 16589-3:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 3: Storage, handling and installation
- ISO 3127:1994 Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
- ISO 15967:2007 Direct reduced iron - Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
- ISO/DIS 4649:1981 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
- ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures
- ISO 16589-4:2001 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures
- ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 1: Nominal dimensions and tolerances
- ISO 16589-5:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections
- ISO 16589-5:2001 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections
- ISO 16589-3:2001 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 3: Storage, handling and installation
- ISO 16589-1:2001 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 1: Nominal dimensions and tolerances
- ISO 16589-2:2001 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 2: Vocabulary
- ISO 16589-2:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 2: Vocabulary
- ISO 4649:2002 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
- ISO 22768:2017 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- ISO/CD 14505-1:2023 Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress
British Standards Institution (BSI), thermal rotation principle
- BS EN ISO 3219-2:2021 Rheology. General principles of rotational and oscillatory rheometry
- BS EN 60034-11:2005 Rotating electrical machines - Thermal protection
- BS EN 60034-11:2004 Rotating electrical machines-Part 11:Thermal protection
- BS EN IEC 60034-23:2019 Rotating electrical machines - Repair, overhaul and reclamation
- PD ISO/TR 21582:2021 Pyrogenicity. Principles and methods for pyrogen testing of medical devices
- 20/30399870 DC BS EN ISO 3219-2. Rheology. Part 2. General principles of rotational and oscillatory rheometry
- 18/30388263 DC BS EN 60034-11. Rotating electrical machines. Part 11. Thermal protection
- 19/30396706 DC BS EN IEC 60034-11. Rotating electrical machines. Part 11. Thermal protection
- BS ISO 16589-2:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Vocabulary
- BS PD ISO/TR 21582:2021 Pyrogenicity. Principles and methods for pyrogen testing of medical devices
- BS EN 60034-18-31:2012 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in rotating machines
- BS EN 12573-1:2000 Welded static non-pressurized thermoplastic tanks - General principles
- BS ISO 15967:2007 Direct reduced iron - Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
- BS ISO 13041-8:2004 Test conditions for numerically controlled turning machines and turning centres - Evaluation of thermal distortions
- BS EN 12697-3:2013 Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery: Rotary evaporator
- BS EN 12697-31:2007 Bituminous mixtures - Test methods for hot mix asphalt - Specimen preparation by gyratory compactor
- BS EN 12697-3:2013+A1:2018(2021) Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery: Rotary evaporator
- BS ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Performance test procedures
- BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC). General principles
- BS EN ISO 11357-1:1997 Plastics - Differential scanning calorimetry (DSC) - General principles
- BS EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - General principles
- BS EN 12697-3:2005 Bituminous mixtures - Test methods for hot mix asphalt - Bitumen recovery - Rotary evaporator
- BS ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Nominal dimensions and tolerances
- BS ISO 16589-3:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Storage, handling and installation
- BS ISO 16589-5:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Identification of visual imperfections
- BS EN ISO 11358-1:2022 Plastics. Thermogravimetry (TG) of polymers - General principles
- BS EN 12697-31:2004 Bituminous mixtures - Test methods for hot mix asphalt - Specimen preparation gyratory compactor
- BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers. General principles
- BS EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles
- BS EN 60034-18-21:2013 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Thermal evaluation and classification
- BS ISO 6194-3:2010 Rotary shaft lip-type seals incorporating elastomeric sealing elements. Storage, handling and installation
- BS ISO 6194-3:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Storage, handling and installation
- BS EN 60947-8:2003 Low-voltage switchgear and controlgear - Control units for built-in thermal protection (PTC) for rotating electrical machines
- BS ISO 4649:2017 Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
IN-BIS, thermal rotation principle
Group Standards of the People's Republic of China, thermal rotation principle
- T/ZZB 0241-2017 Sublimation transfer base paper
- T/CEEIA 252-2016 Thermal cycle testing method of stator bars for large rotating machines
- T/CSAA 16-2022 Test method of copper plate method heat transfer in rotating state of internal cooling channel of turbine blade
工业和信息化部, thermal rotation principle
ES-AENOR, thermal rotation principle
Danish Standards Foundation, thermal rotation principle
- DS/ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry
- DS/EN 60034-11:2005 Rotating electrical machines Part 11: Thermal protection
- DS/IEC 34-11:1979 Rotating electrical machines - Part 11: Built-in thermal protection - Chapter 1: Rules for protection of rotating electrical machines
- DS/EN ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
- DS/ISO/TR 21582:2021 Pyrogenicity – Principles and methods for pyrogen testing of medical devices
- DS/EN 4551:2003 Aerospace series - Pipe coupling 37°, in heat resisting steel - Swivel nuts - Inch series
- DS/IEC 34-11-3:1986 Rotating electrical machines. Part 11: Built-in thermal protection. Chapter 3: General rules for thermal protectors used in thermal protection systems
- DS/EN 4383:2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
- DS/EN 4384:2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
- DS/EN 60034-18-31:2012 Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
- DS/IEC 34-11-2:1986 Rotating electrical machines - Part 11: Built-in thermal protection - Chapter 2: Thermal detectors and control units used in thermal protection systems
IT-UNI, thermal rotation principle
German Institute for Standardization, thermal rotation principle
- DIN EN ISO 3219-2:2021-08 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021); German version EN ISO 3219-2:2021
- DIN EN 60034-11:2005 Rotating electrical machines - Part 11: Thermal protection (IEC 60034-11:2004); German version EN 60034-11:2004
- DIN 51006:2023-03 Thermal analysis - Thermogravimetry - Principles / Note: Date of issue 2023-01-27*Intended as replacement for DIN 51006 (2005-07).
- DIN 51006:2005-07 Thermal analysis (TA) - Thermogravimetry (TG) - Principles / Note: To be replaced by DIN 51006 (2023-03) (in preparation).
- DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
- DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
- DIN 53019-1:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
- DIN EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021); German version EN ISO 3219-2:2021
- DIN 53019-1:2008-09 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
- DIN ISO 4649:2021-06 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2017)
- DIN EN 4551:2015-02 Aerospace series - Pipe coupling, 37°, in heat resisting steel - Swivel nuts - Inch series; German and English version EN 4551:2014
- DIN EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997); German version EN ISO 11358:1997
- DIN 2384:2020-10 Thermal energy storage - Terminology, requirements, parameters, test principles
- DIN 19553:2002 Wastewater treatment plants - Trickling filter with rotary distributor - Main dimensions and equipment
- DIN 19553:2002-12 Wastewater treatment plants - Trickling filter with rotary distributor - Main dimensions and equipment
- DIN 19569-10:2017 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying
- DIN 19569-10:2001 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying
- DIN 53018-1:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Principles
- DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
- DIN 3761-15:1984 Rotary shaft lip type seals for automobils; test; determination of cold resistant of elastomers; differential-thermoanalysis
- DIN ISO 4649:2020 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2017); Text in German and English
ES-UNE, thermal rotation principle
- UNE-EN ISO 3219-2:2022 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
- UNE-EN IEC 60034-23:2019 Rotating electrical machines - Part 23: Repair, overhaul and reclamation (Endorsed by Asociación Española de Normalización in May of 2019.)
- UNE-EN 4551:2014 Aerospace series - Pipe coupling, 37°, in heat resisting steel - Swivel nuts - Inch series (Endorsed by AENOR in November of 2014.)
YU-JUS, thermal rotation principle
- JUS M.J2.110-1985 Eguipment for exploration and exploitation of oil and naturalgas. Rotary hoses
- JUS N.S5.208-1985 Elektrical, thermal and loading characteristics ofrotating anode X-ray tubes formedica! diagnosis
Professional Standard - Petroleum, thermal rotation principle
- SY/T 7547-1996 Measurement of crude oil yield value.Rotovisco method
- SY/T 0522-2008 Determination of wax appearance temperature in crude petroleum.Test method by rotational viscometer
- SY 7547-2014 Rotational Viscometer Method for Determination of Yield Value of Crude Oil
- SY/T 0522-1993 Determination of wax precipitation point of crude oil by rotational viscometer method
- SY/T 7547-2014 Determination of crude oil yield value by rotational viscometer
- SY/T 0520-2008 Viscosity determination of crude petroleum.Equilibrium method by rotational viscometer
- SY 0522-2008 Rotational Viscometer Method for Determination of Wax Precipitation Point of Annual Crude Oil
- SY/T 0520-1993 Determination of Viscosity of Crude Oil by Rotational Viscometer Equilibrium Method
- SY/T 7549-2000 Determination of viscosity-temperature charts for crude oil with rotational viscometers
- SY/T 6893-2012 Specification of heat treatment process for pipelining crude oil
- SY 6893-2012 Process specification for heat treatment and transportation of crude oil pipeline
VN-TCVN, thermal rotation principle
- TCVN 6627-11-2008 Rotating electrical machines.Part 11: Thermal protection
- TCVN 7681-8-2007 Test conditions for numerically controlled turning machine and turning centres.Part 8: Evaluation of thermal distortion
- TCVN 6144-2003 Thermoplastics pipes.Determination of resistance to external blows.Round-the-clock method
ZA-SANS, thermal rotation principle
- SANS 60034-11:2005 Rotating electrical machines Part 11: Thermal protection
- SANS 4649:2003 Rubber - Vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
- SANS 60034-2A:1974 Rotating electrical machines Part 2A: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) First supplement: Measurement of losses by the calorimetric method
AENOR, thermal rotation principle
- UNE-EN 60034-11:2005 Rotating electrical machines -- Part 11: Thermal protection
- UNE 20027-3:1978 ROTATING ELECTRICAL MACHINES. TEST PROCEDURES FOR DETERMINING PHYSICAL PROPERTIES OF BRUSH MATERIALS
- UNE-ISO 4649:2013 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
- UNE-EN 60034-18-31:2013 Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
- UNE 7523-2:1997 ATMOSPHERES FOR CONDITIONING AND TESTING. DETERMINATION OF RELATIVE HUMIDITY. PART 2: WHIRLING PSYCHROMETER METHOD.
European Committee for Electrotechnical Standardization（CENELEC）, thermal rotation principle
- FprEN IEC 60034-11:2020 Rotating electrical machines - Part 11: Thermal protection
- EN 60034-11:2004 Rotating electrical machines - Part 11: Thermal protection
- EN 60613:2010 Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis
- EN 60034-18-31:2012 Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
International Electrotechnical Commission (IEC), thermal rotation principle
- IEC 60034-11:2004 Rotating electrical machines - Part 11: Thermal protection
- IEC 60034-11:2020 RLV Rotating electrical machines - Part 11: Thermal protection
- IEC 60034-11:2020 Rotating electrical machines - Part 11: Thermal protection
- IEC 60034-11:1978 Rotating electrical machines; part 11: built-in thermal protection; chapter 1: rules for protection of rotating electrical machines
- IEC 60034-23:2019 Rotating electrical machines - Part 23: Repair, overhaul and reclamation
- IEC 60613:1989 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis
- IEC 60034-11-2:1984 Rotating electrical machines; part 11: built-in thermal protection; chapter 2: thermal detectors and control units used in thermal protection systems
- IEC 60034-11-3:1984 Rotating electrical machines; part 11: built-in thermal protection; chapter 3: general rules for thermal protectors used in thermal protection systems
- IEC 60034-2A:1974 Rotating electrical machines Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) Measurement of losses by the calorimetric method (Edition 1.0; First Supplment to pub
- IEC 60034-11-2/AMD1:1990 Rotating electrical machines; part 11: built-in thermal protection; chapter 2: thermal detector and control units used in thermal protection systems; amendment 1 to IEC 60034-11-2:1984
Korean Agency for Technology and Standards (KATS), thermal rotation principle
- KS C IEC 60034-11-2008(2018) Rotating electrical machines－Part 11：Thermal protection
- KS W 1706-2002 Aerospace-Roll threaded heat treated low alloy steel bolt and screws
- KS C IEC 60034-11:2008 Rotating electrical machines-Part 11:Thermal protection
- KS L 0006-2012 Heat balancing of cement rotary kiln
- KS M ISO 3127:2005 Thermoplastics pipes－Determination of resistance to external blows－Round-the-clock method
- KS C IEC 60613:2003 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis
- KS B ISO 16589-2-2006(2011) Rotary shaft lip-type seals incorporating thermoplastic sealing elements－Part 2：Vocabulary
- KS C IEC 60613:2017 Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis
- KS M ISO 4649-2012(2017) Rubber, vulcanized or thermoplastic－Determination of abrasion resistance using a rotating cylindrical drum device
- KS M ISO 4649:2012 Rubber, vulcanized or thermoplastic-Determination of abrasion resistance using a rotating cylindrical drum device
- KS M ISO 4649:2021 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
- KS C IEC 60034-18-31:2019 Rotating electrical machines — Part 18-31: Functional evaluation of insulation systems — Test procedures for form-wound windings — Thermal evaluation and classification of insulation systems used in r
- KS F 2377-2016 Test method for preparing and determining density of hot?mix asphalt mixture by means of the gyratory compactor
- KS B ISO 16589-2:2006 Rotary shaft lip-type seals incorporating thermoplastic sealing elements-Part 2:Vocabulary
- KS F 2377-2016(2021) Test method for preparing and determining density of hot?mix asphalt mixture by means of the gyratory compactor
- KS M ISO 11358:2006 Plastics－Thermogravimetry(TG) of polymers－General principles
- KS M ISO 11359-1:2007 Plastics-Thermomechanical analysis(TMA)-Part 1:General principles
- KS M ISO 11359-1:2015 Plastics－Thermomechanical analysis(TMA)－Part 1：General principles
- KS B ISO 16589-5-2006(2011) Rotary shaft lip-type seals incorporating thermoplastic sealing elements－Part 5：Identification of visual imperfections
- KS B ISO 16589-4-2006(2011) Rotary shaft lip-type seals incorporating thermoplastic sealing elements－Part 4：Performance test procedures
- KS M ISO 22768:2021 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry(DSC)
KR-KS, thermal rotation principle
- KS C IEC 60034-11-2008(2023) Rotating electrical machines－Part 11：Thermal protection
- KS M ISO 4649-2021 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
- KS C IEC 60034-18-31-2019 Rotating electrical machines — Part 18-31: Functional evaluation of insulation systems — Test procedures for form-wound windings — Thermal evaluation and classification of insulation systems used in r
- KS M ISO 22768-2021 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry(DSC)
HU-MSZT, thermal rotation principle
Professional Standard - Machinery, thermal rotation principle
- JB/T 10922-2008 Technical specification of rotating electrical machines used on plateau locamative
- JB/T 9551-1999 Standard test method for thermal deflection rate of spiral and helical coils of thermostat metals
- JB/T 7130-2008 Test method mechanical torque rate of spiral coils of thermostat metal
- JB/T 7130-1993 Test method for mechanical torque rate of thermal bimetallic flat helical elements
AT-ON, thermal rotation principle
- OENORM EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
- ONORM E 1006-1987 Graphical symbols for diagrams; Symbols for the production and conversion of electrical energy
CH-SNV, thermal rotation principle
Lithuanian Standards Office , thermal rotation principle
- LST EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
- LST EN 60034-11-2005 Rotating electrical machines. Part 11: Thermal protection (IEC 60034-11:2004)
- LST EN 4551-2003 Aerospace series - Pipe coupling 37°, in heat resisting steel - Swivel nuts - Inch series
- LST EN 4384-2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
- LST EN 4383-2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
- LST EN 60034-18-31-2012 Rotating electrical machines -- Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
- LST EN 12697-3-2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
TR-TSE, thermal rotation principle
- TS 3583-1981 ROTATING ELECTRICAL MACHINES PART 11 : BUILT-IN THERMAL PROTECTION CHAPTER 1 : RULES FOR PROTECTION OF ROTATING ELECTRICAL MACHINES
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., thermal rotation principle
- ASHRAE FUNDAMENTALS SI CH 8-1993 Physiological Principles and Thermal Comfort
- ASHRAE FUNDAMENTALS IP CH 8-1993 Physiological Principles and Thermal Comfort
- ASHRAE 4113-1998 Heat and Moisture Transfer in Desiccant Coated Rotary Energy Exchangers: Part I - Numerical Model (The full text of this paper can be found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Reasearch@ Volume 3@ Numbe
Anhui Provincial Standard of the People's Republic of China, thermal rotation principle
- DB34/T 3768-2020 Superconducting Cyclotron Rotary Therapy Room Technical Management Requirements
American Society for Testing and Materials (ASTM), thermal rotation principle
- ASTM B389-81(2016) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- ASTM A125-96 Standard Specification for Steel Springs, Helical, Heat-Treated
- ASTM A125-96(2001) Standard Specification for Steel Springs, Helical, Heat-Treated
- ASTM A125-96(2007) Standard Specification for Steel Springs, Helical, Heat-Treated
- ASTM A125-96(2018) Standard Specification for Steel Springs, Helical, Heat-Treated
- ASTM A125-96(2013)e1 Standard Specification for Steel Springs, Helical, Heat-Treated
- ASTM A125-96(2013) Standard Specification for Steel Springs, Helical, Heat-Treated
- ASTM B389-81(2004) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- ASTM F1114-06 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray
- ASTM F1203-97 Standard Specification for Washing Machines-Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
- ASTM B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- ASTM F1203-16 Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
- ASTM F1203-22 Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
- ASTM F1203-06 Standard Specification for Washing Machines-Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
- ASTM F1114-94(2000) Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray
- ASTM F1114-94 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray
- ASTM D3012-19 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
- ASTM F1114-16 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray
- ASTM F1203-11 Standard Specification for Washing Machinesmdash;Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
Fujian Provincial Standard of the People's Republic of China, thermal rotation principle
- DB35/T 1873-2019 General Specifications for Thermal Spraying Rotating Silicon Targets
Professional Standard - Traffic, thermal rotation principle
- JT/T 177.6-2002 Repairing technical requirement for special equipment of bucket dredgers Part 6:Repair and asseemblage for rotary unit
- JT/T 177.7-2002 Repairing technical requirement for special equipment of bucket dredgers Part 7:Repair and assemblage for cuffing unit
- JT/T 177.1-2002 Repairing technical requirement for special equipment of bucket dredgers Part 1:Main rotary shaft ,turning shaft and driven shaft
National Aeronautics and Space Administration (NASA), thermal rotation principle
- NASA NACA-RM-A54H26 REV A-1954 The application of a simplified lifting-surface theory to the prediction of the rolling effectiveness of plain spoiler ailerons at subsonic speeds
- NASA NACA-TR-787-1944 A theoretical investigation of the rolling oscillations of an airplane with ailerons free
- NASA-TR-3082-1979 Rotary-wing aerodynamics - Volume 1: Basic theories of rotor aerodynamics with application to helicopters
CZ-CSN, thermal rotation principle
- CSN ON 44 7412-1963
- CSN 22 2511-1955
- CSN IEC 34-11-2:1992 Rotating electrical machines Part 11-2: Built-in thermal protection Thermal detectors and control units used in thermal protectíon systems
- CSN IEC 34-11-3:1994 Rotating electrical machines. Part 11-3: Built-in thermal protection.General rules for thermal protectors used in thermal protection systems
- CSN 26 9101-1995 Pallets and pallets converters. Principles of security in the materials handling.
- CSN IEC 617-6:1993 Graphical symbols for diagrams. Part 6: Production and conversion of electrical energy
- CSN ISO 3945:1993 Mechanical vibration of large rotating machines with speed range from 10 to 200r/s. Measurement and evaluation of vibration severity in situ
能源部, thermal rotation principle
- SY 5469-1992 Rotary drilling equipment hose (the national standard will be converted into an industry standard after clean-up and rectification)
Society of Automotive Engineers (SAE), thermal rotation principle
GM Europe, thermal rotation principle
- GME QS 104100-1963 Vergtungsstahl Heat Treatable Steel (Formerly Opel 1041)
- GME QS 103600-1979 Vergtungsstahl Heat Treatable Steel (Formerly Opel 1036) English Translation Available
- GME QS 104600-1987 Vergtungsstahl Heat Treatable Steel (Formerly Opel 1046) English Translation Available
- GME QS 106000-1987 Vergtungsstahl Heat Treatable Steel (Formerly Opel 1060) English Translation Available
- GME QS 104000-1987 Vergtungsstah Heat Treatable Steel (Formerly Opel 1040) English Translation Available
- GME QS 514500-1986 Vergtungsstahl Heat Treatable Steel (Formerly OPEL 5145) English Translation Available
- GME QS 413600-1992 Verg黷ungsstahl Heat Treatable Steel (Formerly OPEL 4136) English Translation Available
未注明发布机构, thermal rotation principle
- SAE AMS2772G-2016 Heat Treatment of Aluminum Alloy Raw Materials
- BS EN 4551:2014(2015) Aerospace series — Pipe coupling, 37 °, in heat resisting steel — Swivel nuts — Inch series
- DIN EN 12697-3:2005 Asphalt – Test method for hot asphalt – Part 3: Recovery of the binder: rotary evaporator
- DIN EN 12697-3:2001 Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Binder recovery: Rotary evaporator
RO-ASRO, thermal rotation principle
- STAS 7430/1-1984 Information processing DATA INTERCHANGE ON ROLL-UP PAPER TAPE General requirements
- STAS 11783-1980 Heating furnaces for hot plastic deformation pourposeROTING HEARTH FURNACES HEATEDWITH GAS OR LIQUID FUEL Main parameters
化学工业部, thermal rotation principle
- HG/T 2159-1991 Determination of corrosion inhibition performance of water treatment agent by rotating plate method
US-FCR, thermal rotation principle
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, thermal rotation principle
- GB/T 17948.3-2017 Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Thermal evaluation and classification of insulation systems used in rotating machines
SAE - SAE International, thermal rotation principle
Professional Standard - Medicine, thermal rotation principle
- YY/T 0064-2004 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis
国家医药管理局, thermal rotation principle
- YY/T 0064-1991 Electric heating and load characteristics of medical diagnostic rotating anode X-ray tube
Professional Standard - Hygiene , thermal rotation principle
- WS 216-2001 Diagnostic criteria and principle of management of dengue fever
Association of German Mechanical Engineers, thermal rotation principle
European Association of Aerospace Industries, thermal rotation principle
- AECMA PREN 3692-1998 Aerospace Series Pipe Couplings, 37 Degree, Spherical, in Heat Resisting Steel Swivel Nuts Inch Series
- AECMA PREN 4551-2000 Aerospace Series Pipe Coupling, 37 Degree, in Heat Resisting Steel Swivel Nuts Inch Series Edition P 1
RU-GOST R, thermal rotation principle
- GOST IEC 60034-2A-2012 Rotating electrical machines. Part 2. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for fraction vehicles). Measurement of losses by the calorimetric method
- GOST R IEC 60613-1999 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnisis
- GOST IEC 60034-18-31-2014 Rotating electrical machines. Part 18-31. Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in rotating machines
- GOST R 55089-2012 Resources saving. Waste treatment. Principles for transfrontier movements of hazardous waste
- GOST 27882-1988 Pusher-type furnaces and furnaces with rotary hearth for iron-and-steel heating. Specific energy consumption
- PNST 134-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the internal angle of rotation of the rotary seal to the Superpave (SGC)
- PNST 112-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method of sample preparation by rotary seal (Gyrator)
国家市场监督管理总局、中国国家标准化管理委员会, thermal rotation principle
- GB 37483-2019 Minimum allowable values of energy efficiency and energy efficiency grades for rotary aerator in wastewater treatment
- GB/T 41106.3-2021 Large-scale amusement devices—Inspection, maintenance and repair—Part 3: Sort of rotary rides
BE-NBN, thermal rotation principle
- NBN-EN 60613-1994 Electrical, thermal and loading characterstics of rotating anode X-ray tubes for medical diagnosis
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, thermal rotation principle
- PREN 4551-2012 Aerospace series Pipe coupling 37°@ in heat resisting steel Swivel nuts Inch series (Edition P 2)
- PREN 3692-1998 Aerospace Series Pipe Couplings@ 37 Degree@ Spherical@ in Heat Resisting Steel Swivel Nuts Inch Series
- PREN 4551-2000 Aerospace Series Pipe Coupling@ 37 Degree@ in Heat Resisting Steel Swivel Nuts Inch Series (Edition P 1)
DE-GPVA, thermal rotation principle
American National Standards Institute （ANSI), thermal rotation principle
- ANSI/ASTM F1114:2011 Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray
- ANSI/ASTM A940:1996 Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
- ISO/DIS 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
- ANSI/ASTM F1203:2012 Standard Specification for Washing Machines - Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
Aerospace, Security and Defence Industries Association of Europe (ASD), thermal rotation principle
- ASD-STAN PREN 4551-2012 Aerospace series Pipe coupling 37°, in heat resisting steel Swivel nuts Inch series (Edition P 2)
CENELEC - European Committee for Electrotechnical Standardization, thermal rotation principle
- HD 53.2 S1-1988 Rotating Electrical Machines Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles) First Supplement: Measurement of Losses by the Calorimetric Method
Professional Standard - Electron, thermal rotation principle
- SJ/T 10804-2000 Semiconductor integrated circuits.General principles of measuring methods for level translator
- SJ 20961-2006 General principles of measuring methods of A/D and D/A converters for integrated circuits
AASHTO - American Association of State Highway and Transportation Officials, thermal rotation principle
- TP4-1997 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the SHRP Gyratory Compactor
- TP4-1999 Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the SHRP Gyratory Compactor
Professional Standard - Energy, thermal rotation principle
- NB/SH/T 0865-2013 Standard test method for determination of wear metals and contaminants in used lubricating oils by rotating disc electrode atomic emission spectrometry