ZH
RU
ES
Film Tensile Test
Film Tensile Test, Total:491 items.
In the international standard classification, Film Tensile Test involves: Semiconductor devices, Electromechanical components for electronic and telecommunications equipment, Rubber and plastics products, Analytical chemistry, Packaging materials and accessories, Plastics, Adhesives, Products of the textile industry, Construction materials, Testing of metals, Mechanical testing, Glass, Electrical accessories, Lubricants, industrial oils and related products, Integrated circuits. Microelectronics, Cutting tools, Surface treatment and coating, Optical equipment, Insulating materials, Electrical and electronic testing, Ceramics, Environmental protection, Waxes, bituminous materials and other petroleum products, Sacks. Bags, Agricultural machines, implements and equipment, Office machines, Electricity. Magnetism. Electrical and magnetic measurements, Sterilization and disinfection, Measurement of force, weight and pressure, Gas and steam turbines. Steam engines, Paints and varnishes, Electrical wires and cables, Photography, Paint coating processes, Road engineering, Linear and angular measurements, Equipment for the chemical industry, Organic chemicals, Graphical symbols, Iron and steel products, Optics and optical measurements, Cinematography, Storing. Warehousing, Cans. Tins. Tubes, Capacitors, Housings, enclosures, other machine parts, Non-ferrous metals, Fibre optic communications, Lubrication systems, Sports equipment and facilities, Road vehicle systems, Earthworks. Excavations. Foundation construction. Underground works, Products of the chemical industry, Protection of and in buildings, Wood-based panels.
European Committee for Electrotechnical Standardization（CENELEC）, Film Tensile Test
- EN 62047-8:2011 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films
- EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices Part 3: Thin film standard test piece for tensile testing
- EN 62047-2:2006 Semiconductor devices Micro-electromechanical devices Part 2: Tensile testing method of thin film materials
- EN 60674-2:2017 Specification for plastic films for electrical purposes - Part 2: Methods of test
International Electrotechnical Commission (IEC), Film Tensile Test
- IEC 62047-8:2011 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films
- IEC 62047-3:2006 Semiconductor devices - Micro electromechanical devices - Part 3: Thin film standard test piece for tensile-testing
- IEC 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
- IEC 60674-2:1988/COR1:1995 Specification for plastic films for electrical purposes. Part 2: Methods of test
- IEC 60674-2:2016 Specification for plastic films for electrical purposes - Part 2: Methods of test
- IEC 60674-2:2016/AMD1:2019 Specification for plastic films for electrical purposes - Part 2: Methods of test
- IEC 60674-2:1988 Specification for plastic films for electrical purposes. Part 2: Methods of test
- IEC 60674-2:2016+AMD1:2019 CSV Specification for plastic films for electrical purposes - Part 2: Methods of test
CZ-CSN, Film Tensile Test
RU-GOST R, Film Tensile Test
Japanese Industrial Standards Committee (JISC), Film Tensile Test
- JIS K 7127:1989 Testing method for tensile properties of plastic films and sheets
- JIS R 3255:1997 Test methods for adhesion of thin films on glass substrate
- JIS K 7130:1992 Testing methods for thickness of plastic film and sheeting
- JIS K 7376:2021 Test methods for adhesion of optical thin films on plastic substrate
- JIS K 7128:1991 Testing methods for tear resistance of plastic film and sheeting
- JIS K 7127:1999 Plastics -- Determination of tensile properties -- Part 3: Test conditions for films and sheets
- JIS K 7124:1987 Testing method for dart impact resistance of plastic film and sheeting
- JIS K 7125:1987 Testing method for static and kinetic coefficients of friction of plastic film and sheeting
- JIS C 2151:1990 Testing methods of plastic films for electrical purposes
- JIS C 2151:2006 Testing methods of plastic films for electrical purposes
- JIS C 2151:2019 Testing methods of plastic films for electrical purposes
- JIS K 3835:1990 Testing methods for determining bacterial retention of membrane filters
- JIS Z 2288:2003 Methods of tensile shear test and bend test for thin clad steel sheets
- JIS R 1683:2007 Test method for surface roughness of ceramic thin films by atomic force microscopy
- JIS R 1683:2014 Test method for surface roughness of ceramic thin films by atomic force microscopy
- JIS C 5630-3:2009 Semiconductor devices -- Micro-electromechanical devices-- Part 3: Thin film standard test piece for tensile testing
- JIS R 1636:1998 Test method for thickness of fine ceramic thin films -- Film thickness by contact probe profilometer
- JIS K 6766:2008 Pinhole test method of lined films for corrosion prevention
Taiwan Provincial Standard of the People's Republic of China, Film Tensile Test
- CNS 13336-1994 Method of Test for Tensile Properties of Plastic Films and Sheets
- CNS 13923-1997 Method of test for thickness of plastic film and sheeting
- CNS 13335-1994 Method of Test for Dart Impact Resistance of Plastic Films and Sheets
- CNS 13787-1996 Methods of Test for Tear Resistance of Plastic Films and Sheets
- CNS 13788-1996 Methods of Test for Water Vapor Transmission Rate of Plastic Films and Sheets (Instrument Method)
- CNS 10924-1984 Method of Test for Fiber Optic Devices (Tensile Proof Test)
- CNS 13724-1996 Method of Test for Pull Strength of Microelectronic Wire Bonds
VE-FONDONORMA, Film Tensile Test
ES-AENOR, Film Tensile Test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Film Tensile Test
- GB/T 13022-1991 Plastics--Determination of tensile properties of films
- GB/T 1040.3-2006 Plastics. Determination of tensile properties. Part 3: Test conditions for films and sheets
- GB/T 38446-2020 Micro-electromechanical system technology—Test methods for tensile property measurement of strip thin films
- GB/T 31726-2015 Test method for anti-fogging property of plastic film
- GB/T 5304-2001 Asphalt thin-film oven test method
- GB/T 16276-1996 Test method for blocking of plastic film
- GB/T 13541-1992 Test methods of plastic films for electrical purposes
- GB/T 31727-2015 Test method for attrition rate of transparent plastic film
- GB/T 12027-2004 Plastics-Film and sheeting-Determination of dimensional change on heating
- GB/T 15825.3-1995 Sheet metal formability and test methods--Drawing and drawing load test
- GB/T 12027-1989 Test method for dimensional stability of plastic films
- GB/T 8809-2015 Pendulum impact resistance of plastic film
- GB/T 8809-1988 Test method for pendulum impact resistance of plastic films
- GB/T 4909.3-1985 Test methods for bare wires--Tensile test
- GB/T 1038-2000 Plastics-Film and sheeting-Determination of gas transmission-Differential-pressure method
- GB/T 19603-2004 Test method for drop-proof properties of drop-proof plastic films
- GB/T 31729-2015 Test method for mass per unit area of plastic film
- GB/T 25256-2010 Optical functional films.Release film.The measurement of peeling force at 180°angle and subsequent adhesion
- GB/T 36024-2018 Metallic materials.Sheet and strip.Biaxial tensile testing method using a cruciform test piece
- GB/T 26331-2010 Optical coatings environmental durability test methods
- GB/T 13542.2-2009 Film for electrical insulation.Part 2:Methods of test
- GB/T 16578-1996 Plastics--Film and sheeting--Determination of tear resistance--Trouser tear method
- GB/T 11999-1989 Plastics-Film and sheeting--Determination of tear resistance--Elmendorf method
- GB/T 9639-1988 Plastics-Film and sheeting-Determination of impact resistance--Free falling dart method
- GB/T 15825.3-2008 Sheel metal formability and test methods.Part 3:Drawing and drawing load test
- GB/T 5028-1999 Metallic materials--Sheet and strip--Determination of tensile strain hardening exponent(n-values)
- GB/T 4909.3-2009 Test methods for bare wires.Part 3:Tensile test
Professional Standard - Agriculture, Film Tensile Test
- GB 13022-1991 Test method for tensile properties of plastic film
- GB 11999-1989 Test method for tear resistance of plastic films and sheets Ellemendorf
Korean Agency for Technology and Standards (KATS), Film Tensile Test
- KS M 3054-2011 Testing method for tensile properties of plastic films and sheets
- KS M 3038-2013 Test method for tensile heat distortion temperature of plastic sheeting
- KS M 3054-2013 Testing method for tensile properties of plastic films and sheets
- KS L 2108-2001(2021) Testing methods for adhesion of thin films on glass substrate
- KS M ISO 527-3:2011 Plastics-Determination of tensile properties-Part 3:Test conditions for films and sheets
- KS M ISO 527-3:2016 Plastics－Determination of tensile properties－Part 3：Test conditions for films and sheets
- KS M 3089-1994 Testing method for thickness of plastic film and sheeting
- KS M 3089-2013 Testing method for thickness of plastic film and sheeting
- KS D 2715-2006(2011) Tensile specimen of single- and poly-crystal nano/micro thin film materials
- KS C IEC 60648:2014 Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
- KS D 2715-2006 Tensile specimen of single- and poly-crystal nano/micro thin film materials
- KS M ISO 527-3:2018 Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
- KS D 2715-2017 Tensile specimen of single- and poly-crystal nano/micro thin film materials
- KS M 3088-1994 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
- KS M 3088-2013 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
- KS L 2108-2001 Testing methods for adhesion of thin films on glass substrate
- KS T 1317-2014 Test for impact resistance of plastic film
- KS M 2258-2007 Testing method for effect of heat on thin-film of asphaltic materials
- KS T 1317-1976 Test for impact resistance of plastic film
- KS M 3001-2001(2021) Testing methods for mechanical characteristics of polyethlene film
- KS M 3001-2022 Testing methods for mechanical characteristics of polyethylene film
- KS M 2258-1982 Testing method for effect of heat on thin-film of asphaltic materials
- KS T 1316-2003(2009) Standard method of test for gas transmission rateof plastic film and sheeting
- KS M 2259-1980 Testing method for rolling thin - film oven of asphalt(Effect of heat and air on moving film of asphalt)
- KS M 3030-1980(2001) DETERMINATION OF FLAMMABILITY AND BURNING RATE OF PLASTICS IN THE FORM OF FILM
- KS M 2258-2007(2022) Testing method for effect of heat on thin-film of asphaltic materials
- KS M 3030-1980 DETERMINATION OF FLAMMABILITY AND BURNING RATE OF PLASTICS IN THE FORM OF FILM
- KS T ISO 7965-2:2007 Sacks－Drop test－Part 2：Sacks made from thermoplastic flexible film
- KS C IEC 60674-2-2014(2019) Specification for plastic films for electrical purposes ― Part 2: Methods of test
- KS C IEC 62047-8:2015 Semiconductor devices ― Micro-electromechanical devices ― Part 8: Strip bending test method for tensile property measurement of thin films
- KS M 3029-2002 TEST METHOD FOR TEAR PROPAGATION RESISTANCE OF PLASTIC FILM AND THIN SHEETING BY A SINGLETEAR METHOD
- KS M ISO 15184:2002 Paints and varnishes-Detremination of film hardness by pensil test
- KS M ISO 15184:2013 Paints and varnishes ― Determination of film hardness by pencil test
- KS F 2622-2018 Standard test method for performance evaluation of membrane roofing systems
- KS K 0571-2021 Test method of fire tests for flame propagation of textiles and films
American Society for Testing and Materials (ASTM), Film Tensile Test
- ASTM D8314-20 Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
- ASTM D7744/D7744M-20 Standard Test Methods for Tensile Testing of High Performance Polyethylene Films
- ASTM F390-98(2003) Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
- ASTM D5397-07 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM D5397-99 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM D5397-07(2012) Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM D5748-95(2019) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
- ASTM D5748-95(2007) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
- ASTM D5748-95 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
- ASTM D5748-95(2001) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
- ASTM D4073-94(2003) Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
- ASTM D4073-94(1998)e1 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
- ASTM D4073/D4073M-06(2019)e1 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
- ASTM D4073-06(2013) Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
- ASTM F1597-01 Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch
- ASTM F1597-00 Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch
- ASTM F1597-02 Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch
- ASTM F2592-16 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
- ASTM F2592-08 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
- ASTM D2838-07 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
- ASTM D2838-95 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
- ASTM D2838-02 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
- ASTM D2838-08 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
- ASTM D2838-18 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
- ASTM D2838-09 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
- ASTM D2838-09e1 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
- ASTM F2592-07a Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
- ASTM F2592-07 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
- ASTM F1661-96 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
- ASTM F1661-96(2002) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
- ASTM F1661-08 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
- ASTM D5385-93(2000)e1 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
- ASTM D2510-94(1998) Standard Test Method for Adhesion of Solid Film Lubricants
- ASTM F2592-06 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
- ASTM F1661-09 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
- ASTM F2592-09 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
- ASTM F2592-10 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
- ASTM D2510-22 Standard Test Method for Adhesion of Solid Film Lubricants
- ASTM D2510-94(2017) Standard Test Method for Adhesion of Solid Film Lubricants
- ASTM D5385/D5385M-93(2014)e1 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
- ASTM D7003-03 Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
- ASTM C1305-00 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
- ASTM C1306-00 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
- ASTM C1306-08 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
- ASTM F1681-14 Standard Test Method for Determining Current Carrying Capacity of a Membrane Switch Circuit
- ASTM D2578-09 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
- ASTM D4885-01(2006) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
- ASTM D4885-88(1995) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
- ASTM D4885-01(2011) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
- ASTM D2578-04a Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
- ASTM D2578-04 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
- ASTM D2578-23 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
- ASTM D2578-17 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
- ASTM F22-02 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
- ASTM F22-02(2007) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
- ASTM F22-13 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
- ASTM D5414-95(2001) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
- ASTM D5414-95 Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
- ASTM D5414-95(2007) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
- ASTM D5414-95(2012) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
- ASTM D3354-08 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
- ASTM D7281-07(2021) Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
- ASTM F627-99 Standard Practice for Testing Flake of Single-Strike Film Typewriter Ribbons
- ASTM F627-99(2003) Standard Practice for Testing Flake of Single-Strike Film Typewriter Ribbons
- ASTM D2923-08 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
- ASTM D2923-06 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
- ASTM D2923-95 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
- ASTM D2923-01 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
- ASTM D2923-13 Standard Test Method for Rigidity of Polyolefin Film and Sheeting
- ASTM F2750-09 Standard Test Method for Determining the Effects of Bending a Membrane Switch or Assembly
- ASTM C1306-05 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
- ASTM C1306-05a Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
- ASTM C1305-05 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
- ASTM F1762-14 Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch
- ASTM D7056-04 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
- ASTM F1151-88(1998) Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
- ASTM F390-11 Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
- ASTM F1895-14 Standard Test Method for Submersion of a Membrane Switch
- ASTM F21-65(2007) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
- ASTM D3363-22 Standard Test Method for Film Hardness by Pencil Test
- ASTM E2245-05 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM F1681-96(2002) Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit
- ASTM F1681-96 Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit
- ASTM E2245-02 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ASTM D3354-15 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
- ASTM D7093-04 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
- ASTM D2872-97 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM D5458-95(2020) Standard Test Method for Peel Cling of Stretch Wrap Film
- ASTM E252-05 Standard Test Method for Thickness of Thin Foil, Sheet, and Film by Mass Measurement
- ASTM D6583-00 Standard Test Method for Porosity of Paint Film
- ASTM F218-95(2000) Standard Test Method for Analyzing Stress in Glass
- ASTM F2188-02(2019) Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
- ASTM D1004-94a Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
- ASTM D1434-82(1998) Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
- ASTM D1434-82(2009)e1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
- ASTM D1004-13 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
- ASTM D1434-82(2015)e1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
- ASTM D1004-09 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
- ASTM F2073-00 Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch
- ASTM F2073-01(2006) Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch
- ASTM F2073-14 Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch
- ASTM F2187-02 Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
- ASTM D2872-19 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM D2872-21 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM D2872-12 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM D2872-04 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM D2872-12e1 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM F1682-96 Standard Test Method for Determining Travel of a Membrane Switch
- ASTM F1682-02 Standard Test Method for Determining Travel of a Membrane Switch
- ASTM F1663-95 Standard Test Method for Determining the Capacitance of a Membrane Switch
- ASTM F1663-95(2002) Standard Test Method for Determining the Capacitance of a Membrane Switch
- ASTM F1663-09 Standard Test Method for Determining the Capacitance of a Membrane Switch
- ASTM F1151-88(2003) Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
- ASTM F2072-14 Standard Test Method for Hosedown of a Membrane Switch
- ASTM D5458-95(2012) Standard Test Method for Peel Cling of Stretch Wrap Film
- ASTM D5331-03 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
- ASTM D1938-19 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
- ASTM F1995-12 Standard Test Method for Determining the Shear Force of a Surface Mount Device (SMD) in a Membrane Switch
- ASTM F2188-02 Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
- ASTM D5397-19a Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM D5397-99(2005) Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM D5397-19 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM D5397-99e1 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM D5397-20 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM F21-14 Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
- ASTM E252-04 Standard Test Method for Thickness of Thin Foil and Film by Mass Measuerment
- ASTM D1004-03 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
- ASTM D1004-94a(2003) Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
- ASTM D2732-14(2020) Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
- ASTM D2732-14 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
- ASTM D2305-02 Standard Test Methods for Polymeric Films Used for Electrical Insulation
- ASTM F1570-94 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch
- ASTM D3633/D3633M-12 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
- ASTM E252-84(1999) Standard Test Method for Thickness of Thin Foil and Film by Weighing
- ASTM F1570-01 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch
- ASTM D3420-14 Standard Test Method for Pendulum Impact Resistance of Plastic Film
- ASTM D3420-08a Standard Test Method for Pendulum Impact Resistance of Plastic Film
- ASTM D882-09 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- ASTM D882-97 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- ASTM D882-18 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- ASTM D7217-22 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- ASTM D5635/D5635M-18 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM D5635-04 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM D5635-03 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM D5602/D5602M-18 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
- ASTM D5635/D5635M-18(2022) Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
- ASTM D5602/D5602M-18(2022) Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
- ASTM B825-19 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
- ASTM D2872-22 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
- ASTM D1754-97 Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
- ASTM F22-21 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
- ASTM D1754-97(2002) Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
- ASTM D4964-96(2012) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D4964-96(2012)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D2582-03 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
- ASTM E252-06 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
- ASTM D2732-03 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
- ASTM D2732-96 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
- ASTM D2582-07 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
- ASTM E252-06(2013) Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
- ASTM D1894-14 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
- ASTM D2582-09 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
- ASTM D1894-11 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
- ASTM D1894-11e1 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
- ASTM F1842-97 Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications
- ASTM D4435-04 Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D4435-84(1998) Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D4435-08 Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D4435-13 Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D4435-13e1 Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D7004-03 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
- ASTM D1239-22 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
- ASTM D4073-06 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
- ASTM D6988-03 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
- ASTM D4321-99 Standard Test Method for Package Yield of Plastic Film
- ASTM F1680-02 Standard Test Method for Determining Circuit Resistance of a Membrane Switch
- ASTM D1676-02 Standard Test Methods for Film-Insulated Magnet Wire
- ASTM D1676-99 Standard Test Methods for Film-Insulated Magnet Wire
- ASTM D1676-01 Standard Test Methods for Film-Insulated Magnet Wire
- ASTM D1676-03 Standard Test Methods for Film-Insulated Magnet Wire
- ASTM D3420-95 Standard Test Method for Pendulum Impact Resistance of Plastic Film
- ASTM F1689-05 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
- ASTM D3207-92(2002) Standard Test Method for Detergent Resistance of Floor Polish Films
- ASTM F1689-02 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
- ASTM F1689-96 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
- ASTM D4321-09 Standard Test Method for Package Yield of Plastic Film
- ASTM D3420-21 Standard Test Method for Pendulum Impact Resistance of Plastic Film
- ASTM F1151-88(2008) Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
- ASTM F1689-05(2012) Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
- ASTM D4321-15 Standard Test Method for Package Yield of Plastic Film
- ASTM D3420-95(2002) Standard Test Method for Pendulum Impact Resistance of Plastic Film
- ASTM D3420-08 Standard Test Method for Pendulum Impact Resistance of Plastic Film
- ASTM D882-02 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- ASTM D882-01 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- ASTM D882-00 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- ASTM D882-10 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- ASTM D882-12 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
Canadian General Standards Board （CGSB), Film Tensile Test
ZA-SANS, Film Tensile Test
- SANS 234:2006 Bursting strength of fabrics: Diaphragm pressure test
SE-SIS, Film Tensile Test
German Institute for Standardization, Film Tensile Test
- DIN 16726:2011 Plastic sheets.Testing
- DIN 42115-3:1988 Membrane switches; membrane-switch-arrays; ratings, requirements, tests
- DIN 16995:1992 Films for packaging; plastic films; properties, testing
- DIN 55543-1:2010-01 Packaging test - Test methods for packaging films - Part 1: Determination of the film thickness
- DIN EN 62047-3:2007 Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile-testing (IEC 62047-3:2006); German version EN 62047-3:2006
- DIN 42115-2:1988 Membrane switches; membrane-switch-keyboards without sensing point; ratings, requirements, tests
- DIN EN 62047-3:2007-02 Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile-testing (IEC 62047-3:2006); German version EN 62047-3:2006
- DIN 53369:1976-02 Testing of plastic films; determination of the shrinking stress
- DIN 53369:1976 Testing of plastic films; determination of the shrinking stress
- DIN 55543-4:2010 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of polyethylene films
- DIN 55543-4:2017-03 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath
- DIN 55543-4:2017 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath
- DIN EN 62047-2:2007 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006); German version EN 62047-2:2006
- DIN 55543-1:1986 Packaging test; test methods for plastic sacks; determination of the film thickness
- DIN EN 13523-17:2019 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
- DIN 58196-4:1996 Optical coatings - Part 4: Testing of the abrasion resistance with eraser
- DIN 42115-1:1988 Membrane switches; general; concepts, ratings, requirements, tests
- DIN 53363:2003 Testing of plastic films - Tear test using trapezoidal test specimen with incision
- DIN 55403:2014-07 Packaging test - Test method for packaging films - Determination of the tendency to curl
- DIN 55543-6:2019-04 Packaging test - Test methods for packaging films - Part 6: Determination of grammage
- DIN 53380-2:2006 Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films
- DIN 16906:1989 Testing of plastic sheeting and films; sample and specimen preparation and conditioning
- DIN EN ISO 527-3:2019-02 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018); German version EN ISO 527-3:2018
- DIN EN 16283:2013 Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane; German version EN 16283:2013
- DIN EN 17679:2021 Testing of plastics films - Tear test using trapezoidal test specimen with incision; German and English version prEN 17679:2021
- DIN EN 62047-8:2011-12 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films (IEC 62047-8:2011); German version EN 62047-8:2011
- DIN EN 62047-2:2007-02 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006); German version EN 62047-2:2006
- DIN 51214:1977 Testing of Steel; Tensile Test for Round Wires Using Knotted Specimens
- DIN EN ISO 11897:2001 Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999); German version EN ISO 11897:2001
Military Standard of the People's Republic of China-General Armament Department, Film Tensile Test
- GJB 983.3-1990 Military rubber film test methods air tightness test and pressure test
- GJB 983.5-1993 Military rubber film test method low temperature folding test
- GJB 715.15-1990 Fastener test methods torque - tension
- GJB 983.7-1993 Military Rubber Film Test Method Fatigue Life Determination
- GJB 983.4-1993 Test methods for military rubber films - Determination of low-temperature elasticity
American National Standards Institute （ANSI), Film Tensile Test
Professional Standard - Ferrous Metallurgy, Film Tensile Test
- YB/T 4287-2012 Metallic materials.Sheet and strip.Testing method for drawbead restraining force
VN-TCVN, Film Tensile Test
- TCVN 4501-3-2009 Plastics.Determination of tensile properties Part 3: Test conditions for films and sheets
National Electrical Manufacturers Association（NEMA), Film Tensile Test
CEN - European Committee for Standardization, Film Tensile Test
- EN ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- PREN 13523-17-2018 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
International Organization for Standardization (ISO), Film Tensile Test
- ISO 527-3:1995 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- ISO 527-3:1995/cor 1:1998 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets; Technical Corrigendum 1
- ISO 527-3:2018 Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
- ISO 7965-2:1993 Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film
- ISO 4746:1977 Oxygen-free copper; Scale adhesion test
- ISO 15013:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods
Association Francaise de Normalisation, Film Tensile Test
- NF T54-424:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods.
- NF T51-034-3:1995 Plastics. Determination of tensile properties. Part 3 : test conditions for films and sheets.
- NF C96-050-3*NF EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices - Part 3 : thin film standard test piece for tensile testing
- NF T51-034-3*NF EN ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3 : test conditions for films and sheets
- NF EN ISO 10734:2016 Chaussures - Méthodes d'essai pour des fermetures à glissière - Résistance des tirettes des fermetures à glissière
- NF E15-039-3*NF EN 837-3:1997 Pressure gauges. Part 3 : diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and testing.
- NF C96-050-2*NF EN 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2 : tensile testing methods of thin film materials.
- NF T54-190:1992 PLASTICS. FILMS FOR AGRICULTURAL USE. SPECIFICATIONS AND TEST METHODS.
- NF T37-001-17*NF EN 13523-17:2019 Coil coated metals - Test methods - Part 17 : adhesion of strippable films
- NF X45-200:1995 Ions separation in liquid phase. Polymeric ion exchange membranes. Characterisation and test methods of homopolar membranes.
- NF A03-002:1991 METALLIC MATERIALS. TENSILE TESTING. PART 2 : VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINES. (EUROPEAN STANDARD EN 10002-2).
- NF EN 62047-3:2006 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 3 : éprouvettes d'essai normalisée en couche mince pour l'essai de traction
- NF C96-050-8*NF EN 62047-8:2011 Semiconductor devices - Micro-electromechanical devices - Part 8 : strip bending test method for tensile property measurement of thin films.
- NF EN 62047-8:2011 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 8 : méthode d'essai de la flexion de bandes en vue de la mesure des propriétés de traction des couches minces
- NF T54-803-1:1994 Plastics. Plasticized polyvinyl chloride membranes for swimming-pools. Specifications and test methods. Part 1 : simple membranes.
- NF EN 62047-2:2006 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 2 : méthodes d'essais de traction des matériaux en couche mince
- NF C26-145-2/A1*NF EN 60674-2/A1:2002 Specification for plastic films for electrical purposes - Part 2 : methods of test
- NF C26-145-2*NF EN 60674-2:1998 Specification for plastic films for electrical purposes. . Part 2 : methods of test.
- NF C26-145-2/A1*NF EN 60674-2/A1:2019 Specification for plastic films for electrical purposes - Part 2 : methods of test
- NF C26-145-2*NF EN 60674-2:2017 Specification for plastic films for electrical purposes - Part 2 : methods of test
- NF T54-803-2:1994 Plastics. Plasticized polyvinyl chloride membranes for swimming-pools. Specifications and test methods. Part 2 : reinforced membranes.
NEMA - National Electrical Manufacturers Association, Film Tensile Test
国家市场监督管理总局、中国国家标准化管理委员会, Film Tensile Test
- GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
- GB/T 13542.2-2021 Plastic films for electrical purposes—Part 2: Methods of test
British Standards Institution (BSI), Film Tensile Test
- BS EN ISO 527-3:1996 Plastics - Determination of tensile properties - Test conditions for films and sheets
- BS EN 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
- BS EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices - Thin film standard test piece for tensile testing
- BS EN 60674-2:1990 Specification for plastic films for electrical purposes. Methods of test
- BS EN 60674-2:2017 Specification for plastic films for electrical purposes. Methods of test
- BS EN 62047-8:2011 Semiconductor devices. Micro-electromechanical devices. Strip bending test method for tensile property measurement of thin films
- BS EN 62047-22:2014 Semiconductor devices. Micro-electromechanical devices. Electromechanical tensile test method for conductive thin films on flexible substrates
- BS EN 10002-2:1992(1998) Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
- BS 2782-1 Method 150D:1976 Methods of testing plastics - Thermal properties - Cold crack temperature of film and thin sheeting
- BS EN ISO 527-3:2018 Tracked Changes. Plastics. Determination of tensile properties. Test conditions for films and sheets
- BS EN 837-3:1998 Pressure gauges - Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
Standard Association of Australia （SAA）, Film Tensile Test
- AS 1145.3:2001 Determination of tensile properties of plastics materials - Test conditions for films and sheets
- AS 4828.2:2008 Degradability of plastics - Methods of test - Determination of brittle point in plastic film using a tensile elongation test
- AS/NZS 1580.107.2:1995 Paints and related materials - Methods of test - Determination of wet film thickness from wet film mass
- AS 1580.107.1:2004 Paints and related materials - Methods of test - Determination of wet film thickness from dry film mass
- AS 1580.203.1:2004 Paints and related materials - Methods of test - Skin formation
- AS/NZS 4266.28:2004 Reconstituted wood-based panels - Methods of test - Bond strength of PVC films
PL-PKN, Film Tensile Test
- PN C89095-1971 Plastics sheeting Test for blocking of plastic film
- PN C89055-1986 Plastics sheeting Test metods of the resistance to Iow temperatur?
Professional Standard - Machinery, Film Tensile Test
- JB/T 8554-1997 Scratch test method for adhesion between vapor plating film and the base
- JB/T 6980.2-1993 Plastic film and paper pressure sensitive adhesive label Test method
Danish Standards Foundation, Film Tensile Test
- DS/EN 62047-3:2007 Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile testing
- DS/EN ISO 527-3/AC:2001 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- DS/EN ISO 527-3/AC:1999 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- DS/EN ISO 527-3:1996 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
- DS/EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
- DS/EN 62047-2:2007 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
- DS/EN 13523-17:2012 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
- DS/EN 62047-8:2011 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films
- DS/IEC 674-2:1990 Specification for plastic films for electrical purposes. Part 2: Methods of test
工业和信息化部, Film Tensile Test
- JC/T 2409-2017 Test method for adhesion of fine ceramic films
- YS/T 1367-2020 Tensile creep test method for titanium alloy sheets used in aviation
IT-UNI, Film Tensile Test
Professional Standard - Petrochemical Industry, Film Tensile Test
- SH/T 0736-2003 Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test)
KR-KS, Film Tensile Test
- KS M ISO 527-3-2018 Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
- KS F 2622-2018(2023) Standard test method for performance evaluation of membrane roofing systems
Lithuanian Standards Office , Film Tensile Test
- LST EN 14932-2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
- LST EN 62047-3-2007 Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile testing (IEC 62047-3:2006)
- LST EN 13523-17-2012 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
- LST EN 62047-2-2007 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006)
AENOR, Film Tensile Test
- UNE-EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
- UNE-EN 13523-17:2012 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
- UNE 115238:2005 Earth-moving machinery. Method of test for the measurement of drawbar pull
Indonesia Standards, Film Tensile Test
- SNI 06-4209.3-1998 Plastics - Determination of tensile properties. Part 3 : Test condition for film and sheet
TR-TSE, Film Tensile Test
- TS 1086-1972 METHOD FOR THIN F?LM ?VEN TEST OF BITUMINOUS MATERIALS
国家食品药品监督管理局, Film Tensile Test
Xinjiang Provincial Standard of the People's Republic of China, Film Tensile Test
- DB65/T 3705-2015 Plastic film and sheet dry heat atmospheric exposure test method
Association of German Mechanical Engineers, Film Tensile Test
- VDI 4487-2017 Examination of quality-related properties of stretch film - Valuation methods, and criteria
RO-ASRO, Film Tensile Test
Group Standards of the People's Republic of China, Film Tensile Test
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Film Tensile Test
- GB/T 34848-2017 Determination of shrinkage character for heat-shrinkable films
- GB/T 33965-2017 Metallic materials—Tensile testing—Determination of thickness reduction ratio for rectangular specimen
Hubei Provincial Standard of the People's Republic of China, Film Tensile Test
Professional Standard - Light Industry, Film Tensile Test
- QB/T 5787-2022 Test method for rubbing resistance of plastic film
- QB/T 2358-1998 Test method for heat seal strength of plastic film packaging bags
Professional Standard - Energy, Film Tensile Test
ES-UNE, Film Tensile Test
- UNE 53954:2017 Plastics. Packaging-stretch polyolefin films for packaging. Characteristics and test methods
- UNE-EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices -- Part 3: Thin film standard test piece for tensile testing (IEC 62047-3:2006) (Endorsed by AENOR in January of 2007.)
- UNE-EN ISO 527-3:2019 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018)
- UNE-EN 62047-8:2011 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films (Endorsed by AENOR in September of 2011.)
CU-NC, Film Tensile Test
- NC 30-78-1988 Plastics Industry. Determination of Initial Tearing Strength of Films and Sheets. Testing Method
Professional Standard - Aviation, Film Tensile Test
- HB 6140.2-1987 Test method for formability of sheet metal deep drawing
European Committee for Standardization (CEN), Film Tensile Test
- EN ISO 527-3:1995 Plastics - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets ISO 527-3: 1995; Incorporating Technical corrigenda June 1998 and April 2001
- EN 10002-2:1991 Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
- prEN 17679-2021 Testing of plastics films - Tear test using trapezoidal test specimen with incision
- EN ISO 7965-2:1996 Sacks - Drop Test - Part 2: Sacks Made from Thermoplastic Flexible Film
SG-SPRING SG, Film Tensile Test
- SS 323-E2-2013 Methods of test for flexible plastic packaging materials.Part E2: Standard test method for determining gas permeability characteristics of plastic film and sheeting
GM Daewoo, Film Tensile Test
工业和信息化部/国家能源局, Film Tensile Test
AT-ON, Film Tensile Test
- OENORM EN 17679-2021 Testing of plastics films - Tear test using trapezoidal test specimen with incision
未注明发布机构, Film Tensile Test
Professional Standard - Electron, Film Tensile Test
- SJ/T 1148-1993 Test method for breakdown strength of organic film for use in capacitors
- SJ/T 1145-1993 General rules of test methods for electrical performances of organic film for use in capacitors
- SJ/T 1146-1993 Test methods for bulk resistivity of organic film for use in capacitors
The American Road & Transportation Builders Association, Film Tensile Test
- AASHTO T 179-2005 Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test)
Malaysia Standards, Film Tensile Test
- MS 1467-1999 Method of test for determination of 2% secant modulus for polyethlylene films
National Fire Protection Association (NFPA), Film Tensile Test
- NFPA 705-2003 Recommended Practice for a Field Flame Test for Textiles and Films
National Metrological Verification Regulations of the People's Republic of China, Film Tensile Test
- JJG 139-2014 Tension, Compression and Universal Testing Machines
- JJG 139-1999 Verification Regulation of Universal Tension and Compression Testing Machine