ZH
RU
ES

Brightness of the strip

Brightness of the strip, Total:497 items.

In the international standard classification, Brightness of the strip involves: Construction materials, Lighting, Pulps, Optics and optical measurements, Aids for disabled or handicapped persons, Ergonomics, Road engineering, Cinematography, Optical equipment, Electromechanical components for electronic and telecommunications equipment, Paper and board, Electronic display devices, Medical equipment, Paper products, Television and radio broadcasting, Paints and varnishes, Occupational safety. Industrial hygiene, Woodworking equipment, Lamps and related equipment, Machine tools, Printed circuits and boards, Iron and steel products, Metrology and measurement in general, Electronic tubes, Optoelectronics. Laser equipment, Paint ingredients, Ferrous metals, Non-ferrous metals, Rubber and plastics products, Adhesives, Products of the textile industry, Applications of information technology, Building accessories, Flexible drives and transmissions, Linear and angular measurements, Continuous handling equipment, Thermodynamics and temperature measurements, Fasteners, Machine tool systems, Audio, video and audiovisual engineering, Data storage devices, Tobacco, tobacco products and related equipment, Resistors, Environmental testing, Insulating materials, Meat, meat products and other animal produce, Cutting tools, Earth-moving machinery, Agricultural machines, implements and equipment, Materials for aerospace construction, MANUFACTURING ENGINEERING, Electrical wires and cables, Buildings, Lubricants, industrial oils and related products, Ferroalloys, Technical drawings.

RO-ASRO, Brightness of the strip

STAS SR 13212-1995 Measurement methods' for luminance and determination of medium luminance
STAS 12572-1987 VIEWING CONDITIONS FOR EVALUATION OF FILMS AND SLIDES FOR TELEVISION Colours, luminances and dimensions
STAS 11480-1988 Cinematography SCREEN LUMINANCE FOR THE PROJECTION IN INDOOR THEATRES
STAS 9106-1971 MEASUREMENT OF THE SCREEN LUMINANCE OF MICROCOPY READES
STAS 8916-1971 SAFETY RUBBER FOOT WEAR Determination of the flexiblily and lightness
STAS R 11621-1981 Artificiol lighting METHOD OF DETERMINATION FOR AVERAGED ILLUMINANCE OF ENCLOSED SPACES
STAS 6451/2-1978 Psycho-physiological acoustics CALCULATION OF LOUDNESS AND LOUDNESS LEVEL OF SOUNDS Complex method.
STAS 1528-1968
STAS SR 13280-1995 Machine tools-Vertical band saws-Acceptance conditions - Testing of accuracy
STAS 9414-1981 POLYPROPYLENIC STRIPES FOR PACKAGES
SR 1701-1995 Test condi?iona for milling machines with table of variable height, with horizontal or vertical spjndle - Part 0: General introrfuction
STAS SR 13279-1995 Surface grinding machines, with horizontal grinding wheel spindle and round table -Acceptance conditions. Testing of accuracy
STAS 10269-1975 Machine-tools aggregates DRILL UNITS WITH SPINDLE SLEEVE AND ADJUSTING SLIDE Provisions lor geometric accuracy
STAS SR ISO 3070-3:1982 Acceptance conditions for boring and milling machines - Testing of the accuracy - Part 3: Planer type machines with movable column
STAS 7776-1967
STAS 2512/1-1987 HAND WHEELS WITHOUT SPOKES Dimensions aud shapes
STAS 9038-1971 CONVEYOE BETS Determination of the thickness

Society of Motion Picture and Television Engineers (SMPTE), Brightness of the strip

SMPTE RP 51-1995 Screen Luminance and Viewing Conditions for 8-mm Review Rooms
SMPTE RP 12-1997 Screen Luminance for Drive-In Theaters
SMPTE RP 98-1995 Measurement of Screen Luminance in Theaters
SMPTE ST 2080-1-2014 Reference White Luminance Level and Chromaticity for HDTV
SMPTE 196M-2003 Motion-Picture Film - Indoor Theater and Review Room Projection - Screen Luminance and Viewing Conditions
SMPTE ST 196M-2003 Motion-Picture Film - Indoor Theater and Review Room Projection - Screen Luminance and Viewing Conditions
SMPTE RP 2080-2-2014 Measurement and Calibration Procedure for HDTV Display Luminance Levels and Chromaticity (Includes Access to Additional Content)
SMPTE ST 2086-2014 Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
SMPTE ST 2086-2018 Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
SMPTE RP 59-1999 Color and Luminance of Review Room Screens for Viewing Motion-Picture Materials Intended for Slides or Film Strips

CU-NC, Brightness of the strip

NC 42-15-1968 Brightness in paper and board
NC 32-36-1987 Paints and Varnishes. Visual Determination of Coating Brightness
NC 40-02-1967 Method for determining textiles producís fastness. Gray Scale II for the evaluation of migration degree.
NC 12-04-25-1986 corrosion Protection Standards Systum. Metallic and Non-Metaliic Inorganic Coatings. Brightness Determination
NC 40-01-1967 Method for determining textiles products fastness. Gray Scale I for the evaluation of color change

AENOR, Brightness of the strip

UNE 40442:1982 BRIGHTNESS OF NON WOVENS CLOTHS
UNE-EN 61262-3:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 3: DETERMINATION OF THE LUMINANCE DISTRIBUTION AND LUMINANCE NON-UNIFORMITY.
UNE-ISO 2470-1:2012 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
UNE 18165-2:1991 CLASSICAL AND NARROW V BELTS. LENGTHS. PART 2: CONDITIONS FOR MEASURING THE DATA LENGHTS.
UNE 15304-2:2006 Test conditions for milling machines with table of variable height. Testing of accuracy. Part 2: Machines with vertical spindle.
UNE 15321:2003 Internal cylindrical grinding machines with horizontal spindle. Test conditions. Testing of the accuracy.
UNE-EN 10277-5:2009 Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
UNE 57061:2002 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness).
UNE-EN 13126-6:2009 Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay)
UNE 27160:1951 CHAINS FOR ANCHORS. CHAIN ENDS WITH OR WITHOUT SWIVEL SHACKLE.
UNE 15317:2004 Surface grinding machines with two columns. Machines for grinding slideways. Test conditions. Testing of the accuracy.
UNE 15304-1:2006 Test conditions for milling machines with table of variable height -- Testing of the accuracy -- Part 1: Machines with horizontal spindle
UNE 15319:2004 External cylindrical and universal grinding machines with a movable table. Test conditions. Testing of the accuracy.
UNE 15302-2:2003 Manually controlled milling machines with table of fixed height. Test conditions. Testing of the accuracy. Part 2: Machines with vertical spindle.
UNE 15302-1:2003 Manually controled milling machines with table of fixed height. Test conditions. Testing of the accuracy. Part 1: Machines with horizontal spindle.
UNE-EN 12034:1996 SELF ADHESIVE TAPES. MEASUREMENT OF THE LEGTH OF A ROLL OF ADHESIVE TAPE.
UNE-EN 10088-5:2010 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
UNE 15316:2004 Surface grinding machines with vertical grinding wheel spindle and reciprocating table. Test conditions. Testing of the accuracy.
UNE 15313-2:2004 High accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle. Test conditions. Testing of the accuracy. Part 2: Portal type machines with moving table.

Korean Agency for Technology and Standards (KATS), Brightness of the strip

KS C 7614-1987 Photometric measurements on incandescent lamps used for photometric standards
KS A ISO CIE 19476:2020 Characterization of the performance of illuminance meters and luminance meters
KS A ISO 24502:2011 Ergonomics-Accessible design-Specification of age-related luminance contrast for coloured light
KS A ISO 24502:2014 Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light
KS C 7613-1999(2019) Methods of luminance measurements in lighting fields
KS B 5627-1989(1994) BRILLIANCY TEST CHARTS FOR PROJECTION LENSES
KS A ISO 6035-2011(2016) Cinematography－Viewing conditions for the evaluation of films and slides for television－Colours, luminances and dimensions
KS A ISO 6035-2011(2021) Cinematography－Viewing conditions for the evaluation of films and slides for television－Colours, luminances and dimensions
KS A ISO 2910:2018 Cinematography — Screen luminance and chrominance for the projection of film motion pictures
KS A ISO 6035:2011 Cinematography－Viewing conditions for the evaluation of films and slides for television－Colours, luminances and dimensions
KS C IEC 61262-3:2003 Medical electrical equipment－Characteristics of electro－optical X－ray image intensifiers－Part 3：Determination of the luminance distribution and luminance non－uniformity
KS M ISO 2470-1:2021 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions(ISO brightness)
KS C IEC 61262-3-2003(2018)
KS C 7619-1979 Photometric measurement on mirror - condenser lamps for projector
KS B 4213-2006 Test conditions for milling machines with table of variable height－Testing of accuracy－Part 3：Machines with vertical spindle
KS B 4213-1986 Test conditions for milling machines with table of variable height－Testing of accuracy－Part 3：Machines with vertical spindle
KS M ISO 2470-2:2019 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions(D65 brightness)
KS A ISO 2910:2003 Cinematography-Screen luminance for the projection of motion-picture prints indoor theatres and review rooms
KS A ISO 2910:2013 Cinematography — Screen luminance for the projection of motion-picture prints indoor theatres and review rooms
KS M ISO 2470:2012 Paper, board and pulps－Measurement of diffuse blue reflectance factor(ISO brightness)
KS M ISO 2470-2006(2011) Paper, board and pulps－Measurement of diffuse blue reflectance factor(ISO brightness)
KS B ISO 1701-2:2021 Test conditions for milling machines with table of variable height —Testing of accuracy — Part 2: Machines with vertical spindle
KS B ISO 1701-2-2016(2021) Test conditions for milling machines with table of variable hight — Testing of accuracy — Part 2: Machines with vertical spindle
KS A ISO 24502-2014(2019) Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light
KS M ISO 3688:2002 Pulps－Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor(ISO brightness)
KS M ISO 3688:2017 Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
KS K 0753-1998 TESTING METHOD FOR TENSILE PROPERTIES OF GEOSYNTHETICS BY WIDE-WIDTH STRIP
KS B 5214-2016 Thermometers with plates
KS B ISO 1985-2016(2021) Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy
KS H ISO 12194-2009(2019) Leaf tobacco－Determination of strip particle size
KS B 4219-2013 Test conditions for high accuracy turret and single spindle coordinate drilling andboring machines with table of fixed height with vertical spindle－Testing of the accuracy－Part 1：Single column type machines
KS M ISO 583:2009 Conveyor belts with a textile carcass－Total belt thickness and thickness of constitutive elements－Test methods
KS B ISO 1985:2021 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table —Testing of the accuracy
KS X 5412-1993 6.3mm wide magnetic tape cartridge for information interchange
KS B ISO 3686-2:2014 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy — Part 2: Portal type machines with moving table
KS B ISO 3686-2:2012 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle-Testing of the accuracy-Part 2 : Portal type machines with moving table
KS A ISO 9960-2:2002 Draughting instruments with or without graduation-Part 2:Protractors
KS A ISO 9960-3:2002 Draughting instruments with or without graduation-Part 3:Set squares
KS A ISO 9960-2:2014 Draughting instruments with or without graduation－Part 2：Protractors
KS A ISO 9960-3:2014 Draughting instruments with or without graduation－Part 3：Set squares
KS B ISO 4875-3:2002 Metal cutting band saw blades－Part 3：Characteristics relating to each type of blade
KS B ISO 4875-3:2016 Metal cutting band saw blades－Part 3：Characteristics relating to each type of blade
KS B ISO 4183:2010 Grooved pulleys for narrow V belts

GM Holden Ltd, Brightness of the strip

HOLDEN HN 2495-2008 PVC CARRIER FOR BRIGHT BELT LINE MOULDINGS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Brightness of the strip

GB/T 8940.2-2002 Pulp-Preparation of laboratory sheets for the measurement of brightness
GB/T 26464-2011 Determination of brightness (whiteness) for paper inorganic pigments
GB/T 19770-2005 Cinematography-Viewing conditions for the evaluation of films and slides for television-Colours,luminances and dimensions
GB/T 7974-2002 Paper,board and pulp-Measurement of brightness--Diff/Geometry
GB/T 4645-1994 Screen luminance for the projection of motion-picture prints in indoor theatres and review rooms
GB/T 4645-2006 Screen luminance for the projection of motion-picture prints in indoor theatres and review rooms
GB/T 7974-2013 Paper,board and pulps.Measurement of diffuse blue reflectance factor.D65 brightness(Diff/ Geometry, Outdoor daylight conditions)
GB/T 21111-2007 Projection in indoor rooms-Classification of transmitting projection screens and measurement of their transmitted luminance levels
GB/T 3789.29-1991 Measurements of the electrical properties of transmitting tubes--Method of measuring the non-linearity in the luminance of the lower frequency
GB/T 24981.2-2010 Test methods of long afterglow phosphors activated by rare earths.Part 2:Determination of relative brightness
GB/T 14634.1-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 1:Determination of relative brightness
GB/T 20564.3-2017(英文版) Continuously cold rolled high strength steel sheet and strip for automobile—Part 3:High strength interstitial free steel
GB/T 23595.2-2009 Test methods of rare earth yellow phosphor for white LED lamps.Part 2:Determining of relative brightness
GB/T 32370-2015 Determination of the length and width for adhesive tapes
GB/T 20564.2-2017(英文版) Continuously cold rolled high strength steel sheet and strip for automobile—Part 2:Dual phase steel

CZ-CSN, Brightness of the strip

CSN 35 8572-1982 Television picture tubes. Measuring method of sereen luminance and non-uniformity of sereen luminance
CSN 50 0241-1969 Brightness (MgO) of fibrous materials and páper
CSN 50 0418-1989 Pulp, páper and board testing Determination of ISO brightness
CSN 80 0175-1976 Colour fastnrss of fluorescent briglilcned textiles to liglit
CSN ISO 2407:1992 Acceptance conditions for internal cylindrical grinding machines with horizontal spendle. Testing of accuracy
CSN ISO 2433:1992 Acceptance conditions for external cylindrical grinding machines with a movable table — Testing of accuracy
CSN ISO 1984:1994 Acceptance conditions for milling machines with table of fixed height with horizontal or vertical spindle-Testing of accuracy
CSN 42 8313-1965 Bands and strips of nickel soft magnetic alloys. Dimensions
CSN 35 8585 Cast.3-1987 Color television picture tubes. Measuring methods of white light screen luminance and determination of ratio of anodě currents at white light
CSN 35 8207-1964 Capacitors for use under tropical conditions.
CSN 65 4607-1987 Fluorescent brightening agents. Methods of concentration, shade and maximum brightening effect determination on páper whitened in tne mass
CSN ISO 1985:1994 Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table-Testing of accuracy
CSN ISO 1701:1993 Test conditions for milling machines with table of variable height, with horizontal or vertical spindle. Testing of the accuracy
CSN 73 5245-1986 Cultural buildings with auditorium. Sight conditions
CSN 24 2372-1985 Boring heads with taper
CSN 25 1235-1974 Vernier callipers with circular dial with points for male measurements and depth gauge

KR-KS, Brightness of the strip

KS A ISO CIE 19476-2020 Characterization of the performance of illuminance meters and luminance meters
KS A ISO 2910-2018 Cinematography — Screen luminance and chrominance for the projection of film motion pictures
KS M ISO 2470-1-2021 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions(ISO brightness)
KS M ISO 2470-1-2016 Paper, board and pulps－Measurement of diffuse blue reflectance factor－Part 1：Indoor daylight conditions(ISO brightness)
KS M ISO 2470-2-2019 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions(D65 brightness)
KS B ISO 1701-2-2021 Test conditions for milling machines with table of variable height —Testing of accuracy — Part 2: Machines with vertical spindle
KS M ISO 3688-2017 Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
KS B ISO 3686-2-2022 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy — Part 2: Portal type mac
KS B ISO 1985-2021 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table —Testing of the accuracy
KS B ISO 3070-4-2014 Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 4: Planer type machines with movable column
KS D ISO 5448-2003(2023)

British Standards Institution (BSI), Brightness of the strip

BS ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
BS ISO 2910:2018 Cinematography. Screen luminance and chrominance for the projection of film motion pictures
BS ISO 2470-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Indoor daylight conditions (ISO brightness)
BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
BS EN 61262-3:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.. Determination of the luminance distribution and luminance non-uniformity
BS EN ISO 12625-7:2014 Tissue paper and tissue products. Determination of optical properties. Measurement of brightness and colour with D65/10 (outdoor daylight)
BS ISO 2470-1:2016 Tracked Changes. Paper, board and pulps. Measurement of diffuse blue reflectance factor. Indoor daylight conditions (ISO brightness)
BS 5550-6.5:1984 Cinematography. Television usage. Specification for the colours, luminances and dimensions for viewing conditions for the evaluation of films and slides for television
BS ISO 2470:2000 Paper, board and pulps - Measurement of diffuse blue reflectance factor (ISO brightness)
BS ISO 787-17:2002 General methods of test for pigments and extenders - Comparison of lightening power of white pigments
BS 5550 Sec.6.5:1984 Cinematography. Television usage. Specification for the colours, luminances and dimensions for viewing conditions for the evaluation of films and slides for television
BS ISO 3688:1999 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
BS ISO 3688:2000 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
BS EN ISO 24502:2011 Ergonomics. Accessible design. Specification of age-related luminance contrast for coloured light
BS EN ISO 24502:2010 Ergonomics. Accessible design. Specification of age-related luminance contrast for coloured light
22/30439263 DC BS ISO 2469. Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor)
BS ISO 1984-1:2001 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with horizontal spindle
BS ISO 1984-2:2001 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with vertical spindle
BS EN 10088-5:2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
BS ISO 3686-2:2000 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Portal type machines with moving table
BS 7527-2.1:1991 Classification of environmental conditions - Environmental conditions appearing in nature - Temperature and humidity
BS ISO/IEC 10373-2:1999 Identification cards - Test methods - Cards with magnetic stripes
BS ISO/IEC 10373-2:2006 Identification cards - Test methods - Cards with magnetic stripes
BS ISO/IEC 10373-2:2015 Identification cards. Test methods. Cards with magnetic stripes
BS EN 10088-3:2014 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
BS EN 10088-3:2005 Stainless steels - Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
BS EN ISO 15147:2012 Light conveyor belts. Tolerances on widths and lengths of cut light conveyor belts
BS EN 60721-2-1:2014 Classification of environmental conditions. Environmental conditions appearing in nature. Temperature and Humidity
BS EN 12034:1997 Self-adhesive tapes - Measurement of the length of a roll of adhesive tape

International Organization for Standardization (ISO), Brightness of the strip

ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
ISO 2910:2007 Cinematography - Screen luminance and chrominance for the projection of motion pictures
ISO 6035:1983 Cinematography; Viewing conditions for the evaluation of films and slides for television; Colours, luminances and dimensions
ISO 3688:1977 Pulps; Measurement of diffuse blue reflectance factor (ISO brightness)
ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
ISO 2910:2018 Cinematography - Screen luminance and chrominance for the projection of film motion pictures
ISO 2470:1973 Paper and board — Measurement of diffuse blue reflectance factor (ISO brightness)
ISO 2470:1977 Paper and board; Measurement of diffuse blue reflectance factor (ISO brightness)
ISO 2910:1990 Cinematography; screen luminance for the projection of motion-picture prints in indoor theatres and review rooms
ISO 12625-7:2014 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight)
ISO 2470:1999 Paper, board and pulps - Measurement of diffuse blue reflectance factor (ISO brightness)
ISO 787-17:1973 General methods of test for pigments - Part XVII: Comparison of lightening power of white pigments
ISO 2433:1973 Test conditions for external cylindrical grinding machines with a movable table — Testing of accuracy
ISO 3688:1999 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
ISO 2895:1974 Cinematography — Screen luminance for review room projection of motion-picture film intended for indoor theatres
ISO 251:2003 Conveyor belts with textile carcass - Widths and lengths
ISO 1985:1974 Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy
ISO 1986:1974 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy
ISO 2976:1973 Abrasive belts; Selection of width/length combinations
ISO 583:1990 Conveyor belts with a textile carcass; tolerances on total thickness and thickness of covers; direct measurement method
ISO 4875-3:1978 Metal cutting band saw blades; Part III : Characteristics relating to each type of blade
ISO 15147:1999 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts
ISO 9960-3:1994 Draughting instruments with or without graduation - Part 3: Set squares
ISO 15147:2012 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts
ISO 9960-2:1994 Draughting instruments with or without graduation - Part 2: Protractors
ISO 4184:1992 Belt drives; classical and narrow V-belts; lengths in datum system

American Society for Testing and Materials (ASTM), Brightness of the strip

ASTM E2630-08 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
ASTM E2630-08e1 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
ASTM E2630-08(2013) Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM F2360-04 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM E2832-12(2017) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
ASTM E1135-97(2003) Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM E1135-97 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM E2176-08 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (R_L-Rain)
ASTM E2177-19 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
ASTM E2177-18 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
ASTM E2177-01(2009) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Wetness
ASTM E2177-01 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Wetness
ASTM E2073-02 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM E2073-00 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM E1135-97(2008)e1 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM E1135-19 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM E1135-12 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM E2177-11 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Wetness
ASTM E2832-12 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
ASTM E2176-01 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Continuous Wetting
ASTM E2073-07 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM E2177-20 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings using the Bucket Method in a Condition of Wet Recovery
ASTM E2073-09 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM E2073-19 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM E2073-19a Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM E2073-10 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM D985-97 Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
ASTM F2360-08 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
ASTM F2360-08(2015)e1 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
ASTM D985-97(2007) Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
ASTM D985-97(2002) Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
ASTM F16-12 Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
ASTM F2964-12(2020) Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
ASTM F2964-12 Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device

International Commission on Illumination (CIE), Brightness of the strip

CIE Pub.30-2-1982 Calculation and measurement of luminance and illuminance in road lighting. Computer program for luminance, illuminance and glare
CIE 244-2021 Characterization of Imaging Luminance Measurement Devices (ILMDs)
CIE Pub.69-1987 Methods of characterizing illuminance meters and luminance meters. Performance, characteristics and specifications
CIE 75-1988 Spectral Luminous Efficiency Functions Based Upon Brightness Matching for Monochromatic Point Sources 2 Degree and 10 Degree Fields (E)
CIE 61-1984 Tunnel Entrance Lighting: A Survey of Fundamentals for Determining the Luminance in the Threshold Zone (E)
CIE 110-1994 Spatial Distribution of Daylight - Luminance Distributions of Various Reference Skies (CIE 110.1-1995 Revision 1)
CIE 212-2014 Guidance towards Best Practice in Psychophysical Procedures Used when Measuring Relative Spatial Brightness
CIE 76-1988 Intercomparison on Measurement of (Total) Spectral Radiance Factor of Luminescent Specimens (1st Edition) (Reprint 1990) (E)

Electronic Components, Assemblies and Materials Association, Brightness of the strip

ECA TEB 24-1981 Effect of Pulse Shape in Raster Dot Alpha-Numeric CRT Presentations on Spot Luminance and Luminance Distribution

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Brightness of the strip

IEEE 618-1984 STANDARD FOR MEASUREMENT OF LUMINANCE SIGNAL-TO- NOISE RATIO IN VIDEO MAGNETIC-TAPE RECORDING SYSTEMS
IEEE 205-2001 Standard on Television: Measurement of Luminance Signal Levels
IEEE 205-1958 STANDARDS ON TELEVISION: MEASUREMENT OF LUMINANCE SIGNAL LEVELS; CORRECTION - JULY 1958

HU-MSZT, Brightness of the strip

国家市场监督管理总局、中国国家标准化管理委员会, Brightness of the strip

GB/T 39388-2020 Characterization of the performance of illuminance meters and luminance meters
GB/T 40277-2021 Paper, board and pulps—Measurement of diffuse blue reflectance factor( ISO brightness)—Indoor daylight conditions
GB/T 24328.11-2020 Tissue paper and tissue products—Part 11: Determination of optical properties—Measurement of brightness and colour—C/2°(indoor daylight) illuminant
GB/T 24328.8-2020 Tissue paper and tissue products—Part 8: Determination of optical properties—Measurement of brightness and colour—D65/10°（outdoor daylight conditions)
GB/T 24981.2-2020 Test methods of rare earth long afterglow phosphors—Part 2: Determination of afterglow brightness

VN-TCVN, Brightness of the strip

TCVN 5176-1990 Artificial lighting.Method of measuring of luminance
TCVN 1865-1-2010 Paper,board and pulps.Measurement of diffuse blue reflectance factor.Part1:Indoor daylight conditions(ISO brightness)
TCVN 1865-2-2010 Paper,board and pulps.Measurement of diffuse blue reflectance factor.Part2:outdoor daylight conditions(D65 brightness)
TCVN 7683-1-2007 Test conditions for milling machine with table of variable height.Testing of the accuracy.Part 1: Machines with horiaontal spindle.
TCVN 7683-2-2007 Test conditions for milling machine with table of variable height.Testing of the accuracy.Part 2: Machines with verticle spindle.
TCVN 7685-1-2007 Test conditions for manually controlled milling machines with table of fixed height.Testing of the accuracy.Part 1: Machines with horizontal spindle
TCVN 7685-2-2007 Test conditions for manually controlled milling machines with table of fixed height.Testing of the accuracy.Part 2: Machines with vertical spindle
TCVN 6729-2008 Pulps.Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)

CO-ICONTEC, Brightness of the strip

ICONTEC 3304-1992

Illuminating Engineering Society of North America, Brightness of the strip

IESNA LM-37-1997 Determination of Average Luminance for Indoor Luminaires
IESNA LM-37-2016 IES Approved Method IES Guide for Determination of Average Luminance (Calculated) for Indoor Luminaires

Association Francaise de Normalisation, Brightness of the strip

NF EN 13721:2005 Meubles - Évaluation de la luminance lumineuse des surfaces
NF EN 61262-3:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 3 : détermination de la distribution de luminance et de la non-uniformité de luminance
NF Q03-039-1*NF ISO 2470-1:2016 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1 : indoor daylight conditions (ISO brightness)
NF G20-030:2020 Textiles - Textiles lumineux - Détermination de l'éclairement énergétique et de la luminance d'étoffes lumineuses
NF Q03-039-2*NF ISO 2470-2:2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 2 : outdoor daylight conditions (D65 brightness).
NF C74-223*NF EN 61262-3:1994 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3 : determination of the luminance distribution and luminance non-uniformity.
NF C93-707-20*NF EN 62326-20:2016 Printed boards - Part 20 : printed circuit boards for high-brightness LEDs
NF Q34-030-7:2014 Tissue paper and tissue products - Part 7 : determination of optical properties - Measurement of brightness and colour with D65/10o (outdoor daylight)
NF Q03-039-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1 : indoor daylight conditions (ISO brightness).
NF E60-111-3:1998 Test condition for milling machines with table of variable height. Testing of accuracy. Part 3 : machines with vertical spindle.
NF EN ISO 24502:2011 Ergonomie - Conception accessible - Spécification du contraste de luminance lié à l'âge pour la lumière colorée
NF E60-112-2*NF ISO 1984-2:2001 Test conditions for manually controlled milling machines with table of fixed height -Testing of the accuracy - Part 2 : machines with vertical spindle
NF E60-112-1*NF ISO 1984-1:2001 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy -- Part 1 : machines with horizontal spindle
NF ISO 2895:1986 Cinématographie - Luminance des écrans de projection dans les salles de vision pour films cinématographiques destinés aux salles d'exploitation
NF A35-572-5*NF EN 10088-5:2009 Stainless steels - Part 5 : technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
NF C95-224:1975 ELECTRONIC TUBES WITH QUALITY CONFORMANCE PROCEDURES IMAGE CONVERTER AND IMAGE INTENSIFIER TUBES PARTICULAR REQUIREMENTS
NF E60-124:1984 TEST CONDITIONS FOR EXTERNAL CYLINDRICAL GRINDING MACHINES WITH A MOVABLE TABLE. TESTING OF ACCURACY.
NF E62-155:1985 Machine tools. Vertical band saws. Acceptance conditions. Testing of accuracy.
NF E62-156:1985 Machines tools. Horizontal band saws. Acceptance conditions. Testing of accuracy.
NF X35-403*NF EN ISO 24502:2011 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light
NF S27-013*NF ISO 2895:1986 Cinematography. Screen luminance for review room projection of motion-picture film intended for indoor theatres.
NF E60-111-1*NF ISO 1701-1:2005 Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1 : machines with horizontal spindle
NF E60-111-2*NF ISO 1701-2:2005 Test conditions for milling machines with table of variable height - Testing of accuracy - Part 2 : machines with vertical spindle
NF E64-051:1982 Woodworking machines. Conditions of acceptance and nomenclature for table band sawing machines. Accuracy testing.
NF A36-232/IN1*NF EN 10268/IN1:2013 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
NF E60-112:1984 ACCEPTANCE CONDITIONS AND NOMENCLATURE FOR MILLING MACHINES WITH A TABLE OF FIXED HEIGHT WITH HORIZONTAL OR VERTICAL SPINDLE. GENERAL INTRODUCTION AND TESTING OF ACCURACY.
NF E60-135*NF ISO 3190:1996 Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle. Testing of the accuracy.
NF E60-115:1995 Acceptance conditions for boring and milling machines with horizontal spindle. Testing of the accuracy. Part 0 : general introduction.
NF X41-048*NF EN 12034:1996 Self adhesive tapes. Measurement of the length of a roll of adhesive tape.
NF EN ISO 24263:2020 Chaussures - Résistance de fixation des lanières, bandes et accessoires
NF EN 12034:1996 Rubans auto-adhésifs - Mesure de la longueur d'un rouleau de ruban adhésif
NF E60-122*NF ISO 1985:2015 Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy
NF F19-483:1998 Railway rolling stock. Graffiti proof tape.
NF E60-136-2*NF ISO 3686-2:2000 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Part 2 : portal type machines with moving table
NF ISO 1986-1:2014 Conditions d'essai des machines à rectifier les surfaces planes, à broche porte-meules à axe horizontal - Contrôle de l'exactitude - Partie 1 : machines avec une table jusqu'à 1 600 mm de long
NF X41-026:1996 Self adhesive tapes. Measurement of thickness.
NF ISO 12194:1996 Tabac en feuilles - Détermination de la taille des particules de strips
NF E26-113:1992 Chain drives - Mechanical chains - Determination of the fatigue strength
NF E23-150:1977 Chain transmissions.calculation of chain lengths and distances between centres.
NF S27-012:1987 Cinematography. 16 mm, 35 mm and 70MM motion-picture films. Screen luminance for the projection of motion-picture prints in indoor theatres and review rooms.
NF T47-151*NF EN ISO 15147:2013 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts
NF E04-710-2*NF ISO 9960-2:1994 Draughting instruments with or without graduation. Part 2 : protractors.
NF E04-710-3:1994 Draughting instruments with or without graduation. Part 3 : set squares.
NF ISO 9960-1:1992 Instruments de dessin avec ou sans graduation - Partie 1 : règles graduées de dessinateurs.
NF E64-054:1982 Woodworking machines. Conditions of acceptance and terminology for thickness planning machines with rotary cutterblock for one side dressing. Accuracy testing.
NF E24-403:2007 Belt drives - V-ribbed belts - Determination of linear density

ECIA - Electronic Components Industry Association, Brightness of the strip

TEB 24-1981 Effect of Pulse Shape in Raster Dot Alpha-Numeric CRT Presentations on Spot Luminance and Luminance Distribution

Institute of Electrical and Electronics Engineers (IEEE), Brightness of the strip

SMPTE RP 51:1995 RP 51:1995 - SMPTE Recommended Practice - Screen Luminance and Viewing Conditions for 8-mm Review Rooms
ANSI/IEEE Std 205-1958 IEEE Standards on Television: Measurement of Luminance Signal Levels
IEEE Std 205-2001 IEEE Standard on Television: Measurement of Luminance Signal Levels
ST 2080-1:2014 ST 2080-1:2014 - SMPTE Standard - Reference White Luminance Level and Chromaticity for HDTV
SMPTE RP 98:1995 RP 98:1995 - SMPTE Recommended Practice - Measurement of Screen Luminance in Theaters
SMPTE RP 12:1997 RP 12:1997 - SMPTE Recommended Practice - Screen Luminance for Drive-In Theaters
SMPTE ST 196:2003 ST 196:2003 - SMPTE Standard - For Motion-Picture Film — Indoor Theater and Review Room Projection — Screen Luminance and Viewing Conditions
ST 196:2003 ST 196:2003 - SMPTE Standard - For Motion-Picture Film — Indoor Theater and Review Room Projection — Screen Luminance and Viewing Conditions
SMPTE RP 2080-2:2014 RP 2080-2:2014 - SMPTE Standard - Measurement and Calibration Procedure for HDTV Display Luminance Levels and Chromaticity
RP 2080-2:2014 RP 2080-2:2014 - SMPTE Standard - Measurement and Calibration Procedure for HDTV Display Luminance Levels and Chromaticity
IEEE Std 1789-2015 IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers
IEEE P1789/D2, September 2014 IEEE Draft Recommended Practices of Modulating Current in High Brightness LEDs for Mitigating Health Risks to Viewers
IEEE P1789/D32, September 2014 IEEE Draft Recommended Practices of Modulating Current in High Brightness LEDs for Mitigating Health Risks to Viewers
SMPTE ST 2086:2018 ST 2086:2018 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
SMPTE ST 2086:2014 ST 2086:2014 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
ST 2086:2014 ST 2086:2014 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
ST 2086:2018 ST 2086:2018 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images

RU-GOST R, Brightness of the strip

GOST 25024.4-1985 Character displays. Methods measuring brightness, luminous intensity, irregularity of brightness and irregularity of luminous intensity
GOST 21997-1976 High tensile steel flattened strip. Specifications
GOST R 8.850-2013 State system for ensuring the uniformity of measurements. Characterization of the performance of illuminance meters and brightness meter. General
GOST 10234-1977 Moderate strength flattened steel strip. Specifications
GOST 12491-1967 Cathod-ray tubes for reception. Method of measurement of screen brilliancy
GOST 21815.16-1986 Image intensifier and image converter tubes. Method of measuring the output brightness non- uniformity ratio
GOST 28651-1990 Sharpening machines for band saws. Basic parameters. Standards of accuracy
GOST R ISO 24502-2012 Ergonomics design. Specification of age-related luminance contrast for coloured light
GOST 25024.5-1987 Character displays. Methods of measuring inherent brightness contrast and irregularity of inherent brightness contrast
GOST 20477-1986 Polyethylene tape with adhesive layer. Specifications
GOST 16755-1971 Cathode-ray receiver devices. Method for measurement of irregularity fluorescent screen brightness
GOST 33529-2015 Band saw blades with cutting elements weld by satellite. Specifications
GOST 25858-1983 Surface density and thickness measures for radioisotope thickness gauges. Specifications
GOST 11583-1974 Polimer materials, building and finishing. Methods for the determination of light resistance and uniformity of painting and lightness
GOST 11074-1993 Hexagonal socket flat-point set screws. Product grades A and B. Specifications
GOST 14080-1978 Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 20958-1980 Unrecorded 12,7 mm magnetic tapes with bobbin for computers. General specifications
GOST 28626-1990 Indirectly heated thermistors with negative temperature coefficient of resistance. General specification
GOST 2162-1997 Adhesive rubberized tape. Specifications
GOST 12292-2000 Canned garnished fish with vegetables. Specifications
GOST 21717-1976 Hubs for magnetic tapes. Specifications
GOST 2162-1978 Adhesive rubberized tape. Specifications
GOST 12292-1966 Canned garnished fish with vegetables. Technical requirements
GOST 11674-1975 Crawel tractors. Grouser shoe bolts. Specifications
GOST 1477-1993 Flat-point straight slotted set screws. Product grades A and B. Specifications
GOST 11098-1975 Gauge callipers with reading arrangement. Specifications
GOST 1505-2001 Cigarettes. General specification
GOST 20-1985 Rubber conveyer belts. Specifications
GOST 9972-1974 Petroleum turbine oils with dopes. Specifications
GOST 1505-1981 Papiroses. General specifications
GOST 1479-1993 Cup-point straight slotted set screws. Product grades A and B. Specifications
GOST 1478-1993 Dog-point straight slotted set screws. Product grades A and B. Specifications
GOST R 50440-1992 Flat transmission belts and corresponding pulleys. Widths

German Institute for Standardization, Brightness of the strip

DIN 5032-7:2017-02 Photometry - Part 7: Classification of illuminance meters and luminance meters
DIN 53778-3:1983 Emulsion paints; determination of contrast ratio and lightness of coatings
DIN EN 61262-3:1995-09 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994); German version EN 61262-3:1994
DIN EN ISO 24502:2011-04 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010); German version EN ISO 24502:2010
DIN 15571-1:1981 Screen luminance for film projection; general requirements to the luminance, main values
DIN 55603:2003 Testing of pigments - Determination of relative tinting strength and of colour difference on reduction of inorganic pigments using the lightness method
DIN 53163:2017 Pigments and extenders - Determination of lightness of extenders and white pigments in powder form
DIN 53163:2018-02 Pigments and extenders - Determination of lightness of extenders and white pigments in powder form
DIN 53163:2018 Pigments and extenders - Determination of lightness of extenders and white pigments in powder form
DIN EN ISO 12625-7:2014 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014); German version EN ISO 12625-7:2014
DIN 18701:1970 Steel straight edge, graduated
DIN EN 12034:1996-07 Self adhesive tapes - Measurement of the length of a roll of adhesive tape; German version EN 12034:1996
DIN EN 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs (IEC 62326-20:2016); German version EN 62326-20:2016
DIN 5043-2:1978 Radioactive luminescent pigments and paints; method of measurement of luminance and designation of luminescent paints
DIN EN 12036:1996 Self adhesive tapes - Solvent penetration into adhesive masking tapes; German version EN 12036:1996
DIN EN ISO 15147:2013-04 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012); German version EN ISO 15147:2012

PL-PKN, Brightness of the strip

PN N84453-1987 Film projection technology Luminance of screens for projection
PN P83017-1990 Woven tapes for falling stamper belts

Japanese Industrial Standards Committee (JISC), Brightness of the strip

JIS P 8148:2018 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Indoor daylight conditions (ISO brightness)
JIS K 5600-8-6:2014 Testing methods for paints -- Part 8: Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Section 6: Assessment of degree of chalking by tape method
JIS P 8148:2001 Paper, board and pulps -- Measurement of diffuse blue reflectance factor (ISO brightness)
JIS G 1235-2:2021 Iron and steel -- Determination of antimony -- Part 2: Spectrophotometric method after extraction of brilliant green complex
JIS B 6225:2006 Test conditions for manually controlled milling machines with table of fixed height -- Testing of the accuracy -- Machines with vertical spindle
JIS B 7527:1977 Thermometers with wooden plates
JIS K 6374:2008 Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts
JIS K 6378-6:2018 Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts
JIS K 6377-6:2022 Conveyor belts -- Total belt thickness and thickness of constitutive elements -- Test methods
JIS B 6203-1:2007 Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1: Machines with horizontal spindle
JIS C 0111:1995 Classification of environmental conditions Part 2: Environmental conditions appearing in nature Temperature and humidity

Canadian General Standards Board （CGSB), Brightness of the strip

CGSB 46-GP-3-1961 Blades; Band Saw, Spring Tempered
CGSB 9.0 NO. 5-93-CAN/CGSB-1993 Methods of Testing Pulp and Paper Brightness of Pulp, Paper and Paperboard
CAN/CGSB-4.2 NO.9.1-M90-1990 Textile Test Methods Breaking Strength of Fabrics - Strip Method - Constant-Time-to-Break Principle

International Telecommunication Union (ITU), Brightness of the strip

ITU-R BT.814-1-1994 Specifications and Alignment Procedures for Setting of Brightness and Contrast of Displays
ITU-R BT.814-2007 Specifications and alignment procedures for setting of brightness and contrast of displays
ITU-R BT.814-2-2007 Specifications and alignment procedures for setting of brightness and contrast of displays
ITU-R BT.814-2 SPANISH-2007 Specifications and alignment procedures for setting of brightness and contrast of displays
ITU-R BT.814-2 FRENCH-2007 Specifications and alignment procedures for setting of brightness and contrast of displays

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Brightness of the strip

ITU-R BT.814-1992 Specifications and Alignment Procedures for Setting of Brightness and Contrast of Displays
ITU-R BT.814-4-2018 Specifications of PLUGE test signals and alignment procedures for setting of brightness and contrast of displays
ITU-R BT.814-3-2017 Specifications of PLUGE test signals and alignment procedures for setting of brightness and contrast of displays

Danish Standards Foundation, Brightness of the strip

DS/EN 61262-3:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity
DS/EN 10277-5:2009 Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
DS/EN ISO 24502:2011 Ergonomics – Accessible design – Specification of age-related luminance contrast for coloured light
DS/EN 13126-6:2009 Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay)
DS/ISO 12030:2010 Tobacco and tobacco products - Non-destructive determination of strips density variation ratio in case - Ionizing radiation method
DS/EN 12034:1997 Self-adhesive tapes - Measurement of the length of a roll of adhesive tape
DS/EN ISO 15147:2013 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts
DS/EN ISO 583:2007 Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods
DS/EN 10088-5:2012 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes

未注明发布机构, Brightness of the strip

BS ISO 2470-2:2008(2009) Paper, board and pulps — Measurement of diffuse blue reflectance factor Part 2 : Outdoor daylight conditions (D65 brightness)

TR-TSE, Brightness of the strip

TS 3373-1979 CINEMATOGRAPHY - SCREEN LUMINANCE FOR THE PROJECTION OF MOTION — PICTURE FILMS IN INDOOR THEATRES

International Electrotechnical Commission (IEC), Brightness of the strip

IEC 60572:1977 Determination of the luminance distribution of electro-optical X-ray image intensifiers

IN-BIS, Brightness of the strip

IS 4496-1968
IS 13729-1993 Determination of the kluminance distribution of electro-optical x-ray image intensifiers
IS 5353-1969
IS 6893 Pt.5-1975
IS 5911-1977

American National Standards Institute （ANSI), Brightness of the strip

ANSI/ASTM E2073:2010 Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ANSI/TAPPI T525 om-2012 Diffuse brightness of paper, paperboard and pulp (d/0) - Ultraviolet level C
ANSI C136.17-1995 Roadway and Area Lighting--Enclosed Side-mounted Luminaires for Horizontal-burning High-intensity Discharge Lamps--Mechanical Interchangeability of Refractors

Professional Standard - Machinery, Brightness of the strip

JB/T 5741-1991 Blade of woodworking band saw. Durability test
JB/T 7273.10-2014 Spoked handwheels with fold-away handle

机械电子工业部, Brightness of the strip

JB 5741-1991 Woodworking band saw blade durability test

ES-AENOR, Brightness of the strip

Lithuanian Standards Office , Brightness of the strip

LST EN 61262-3-2001 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994)
LST EN 10277-5-2008 Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
LST EN 13126-6-2009 Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay)
LST EN ISO 24502:2011 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010)
LST EN 12034-2000 Self-adhesive tapes - Measurement of the length of a roll of adhesive tape
LST EN 10088-5-2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes

BE-NBN, Brightness of the strip

NBN L 14-002-1975 Methods of predetermination for illuminances, luminances and glare indices in artificial lighting of enclosed spaces
NBN C 74-572-1990

European Committee for Electrotechnical Standardization（CENELEC）, Brightness of the strip

HD 511 S1-1988 Determination of the Luminance Distribution of Electro- Optical X- Ray Image Intensifiers
EN 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs

GOSTR, Brightness of the strip

GOST R IEC 62326-20-2019 Printed boards. Part 20. Electronic circuit boards for high-brightness LEDs
GOST R 58107.3-2018 General use automobile roads lighting. Method of measurement of road surface luminance by mobile way
GOST 9972-2020 Petroleum turbine oils with additives. Specifications
GOST 20-2018 Rubber-fabric conveyer belts. Specifications

Standard Association of Australia （SAA）, Brightness of the strip

AS/NZS 1301.515:2017 Methods of test for pulp and paper, Method 515: Measurement of diffuse radiance factor (diffuse reflectance factor) — Indoor daylight conditions (ISO brightness)
AS/NZS 1301.446s:2005 Methods of test for pulp and paper - Measurement of diffuse blue reflectance factor (brightness) of pulp, paper and paperboard
AS/NZS 1301.462s:2005 Methods of test for pulp and paper - Measurement of diffuse blue reflectance factor (ISO brightness) of pulp, paper and paperboard
AS/NZS 1301.466s:2005 Methods of test for pulp and paper - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
AS 1334.2:1982 Methods of testing conveyor and elevator belting - Determination of thickness of belting and rubber covers across the width

IT-UNI, Brightness of the strip

(U.S.) Ford Automotive Standards, Brightness of the strip

FORD WSS-M1P96-B1-2011 PLATING, BRIGHT OR LOW GLOSS DECORATIVE STAINLESS STEEL (CHROME FLASH), LEVEL 1 CORROSION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD FLTM BU 120-1-2000 WEATHERSTRIP TAPES (HEAT-BONDABLE) - 90 DEGREE PEEL ADHESION

IEC - International Electrotechnical Commission, Brightness of the strip

PAS 62326-20-2011 Printed boards – Part 20: Electronic circuit board for high-brightness LEDs (Edition 1.0)

NZ-SNZ, Brightness of the strip

AS/NZS 1301.520:2016 Methods of test for pulp and paper Part 520: Measurement of diffuse radiance factor (diffuse reflectance factor)-Outdoor daylight conditions (D65 brightness)

机械工业部, Brightness of the strip

JB/T 8256.3-1995 Test method for screen brightness and contrast of transparent microform readers

CEN - European Committee for Standardization, Brightness of the strip

EN ISO 787-17:2017 General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments
EN ISO 787-17:2019 General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments
EN 10088-5:2009 Stainless steels - Part 5: Technical delivery conditions for bars@ rods@ wire@ sections and bright products of corrosion resisting steels for construction purposes

ES-UNE, Brightness of the strip

UNE-EN ISO 24502:2010 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010) (Endorsed by AENOR in February of 2011.)
UNE-EN ISO 15147:2012 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012) (Endorsed by AENOR in February of 2013.)

ESDU - Engineering Sciences Data Unit, Brightness of the strip

ESDU 09016-2013 Use of local-flow conditions for calculation of roughness-particle height in transition strips on wings

European Committee for Standardization (CEN), Brightness of the strip

CEN EN 10277-5-2008 Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
CEN EN 10277-5-2008_ Bright steel products — Technical delivery conditions — Part 5: Steels for quenching and tempering
EN ISO 24502:2010 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010)
EN 12034:1996 Self adhesive tapes - Measurement of the length of a roll of adhesive tape
EN 2599:2001 Aerospace series - Strips in aluminium and aluminium alloys; Thickness 0,25 mm <= a <= 3,2 mm - Dimensions
EN ISO 15147:2012 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts

PT-IPQ, Brightness of the strip

NP 15-1960

Indonesia Standards, Brightness of the strip

SNI ISO 3688:2014 Pulps – Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
SNI 05-2206-1991 Width and length of conveyor belt

BR-ABNT, Brightness of the strip

ABNT P-PB-29-1969

AT-ON, Brightness of the strip

ONORM M 9115-3-2001 Machine tools - Acceptance conditions for single column milling machines with bed of fixed height,with horizontal spindle
ONORM M 9115-4-2001 Machine tools - Acceptance conditions for single column milling machines with bed of fixed height,with vertical spindle
ONORM M 9115-2-2001 Machine tools - Acceptance conditions for single column milling machines with knee of variable height, with vertical spindle
ONORM M 9115-1-2001 Machine tools - Acceptance conditions for single column milling machines with knee of variable height, with horizontal spindle

Group Standards of the People's Republic of China, Brightness of the strip

T/GDIIA 001-2020 Luminance Robustness Testing Requirements for Image Recognition Models Based on Convolutional Neural Networks

US-FCR, Brightness of the strip

FCR FED H-08-4 VOL 4-E-F-3-1988 STRIP LIGHT WITH SYMMETRIC REFLECTOR

TH-TISI, Brightness of the strip

TIS 1353.11-1998 Standard test methods for paper and paper board.part 11: measurement of diffuse blue reflectance factor (iso brightness)

VE-FONDONORMA, Brightness of the strip

NORVEN 24-14-1963

ZA-SANS, Brightness of the strip

SANS 5311:2006 Length of textile shoe laces

Professional Standard - Aviation, Brightness of the strip

HB 5-16-1983 Specifications for steel wire ropes with joints
HB 5-16-1976 Specifications for steel wire ropes with joints

GB-REG, Brightness of the strip

REG NACA-ARR-1942 The Strength and Stiffness of Shear Webs With and Without Lightening Holes

Professional Standard - Electron, Brightness of the strip

SJ 20382-1993 Locking device for PCB with conductive strip

GM North America, Brightness of the strip

GM GM9893P-2003 Splice Strength of Weatherstrips

Aerospace, Security and Defence Industries Association of Europe (ASD), Brightness of the strip

ASD-STAN PREN 3824-1996 Aerospace Series Clinch-Nuts, Blind, Self-Locking, with Counterbore, in Corrosion Resisting Steel, MoS2 Lubricated Classification: 600 MPa (at Ambient Temperature) /315 Degrees C (Edition P1)