ZH
RU
ES

bod+meter

bod+meter, Total:496 items.

In the international standard classification, bod+meter involves: Water quality, Vocabularies, Photography, Acoustics and acoustic measurements, Linear and angular measurements, Pharmaceutics, Road engineering, Equipment for the paper industry, Optics and optical measurements, Paper and board, Medical equipment, Analytical chemistry, Nuclear energy engineering, Textile machinery, Metrology and measurement in general, Non-destructive testing, Optical equipment, Tobacco, tobacco products and related equipment, Coals, Radiation measurements, Laboratory medicine, Equipment for petroleum and natural gas industries, Plant and equipment for the food industry, Measurement of volume, mass, density, viscosity, Construction equipment, Mining equipment, Equipment for the chemical industry, Transport, Telecommunication terminal equipment, Radiation protection, Terminology (principles and coordination), Technical drawings, Applications of information technology, Electricity. Magnetism. Electrical and magnetic measurements, Road vehicle systems, Hydraulic energy engineering, Paint ingredients, Geology. Meteorology. Hydrology, Construction industry, Non-ferrous metals, Farming and forestry, Leather technology, Milk and milk products, Coatings and related processes used in aerospace industry, Quality, Equipment for the rubber and plastics industries, Radiocommunications, Noise with respect to human beings, Paints and varnishes, Electrical and electronic testing, Measurement of fluid flow, Products of the chemical industry, Construction technology, Cereals, pulses and derived products, Soil quality. Pedology, Rubber.


National Metrological Verification Regulations of the People's Republic of China, bod+meter

SE-SIS, bod+meter

Group Standards of the People's Republic of China, bod+meter

Professional Standard - Environmental Protection, bod+meter

  • HJ/T 86-2002 Water quality.Determination of biochemical oxygen demand(BOD).Speedy testing method of microorganism sensor
  • HJ 505-2009 Water quality.Determination of biochemical oxygen demand after 5 days(BOD)for dilution and seeding method

NL-NEN, bod+meter

  • NEN 6634-1991 Water- Determination of biochemical oxygen demand after n days (BOD?) Dilution and seeding method
  • NEN 3168-1969 Butyrometric determination of fat content of dried milk

ANSI - American National Standards Institute, bod+meter

  • IT4.40-1996 Photography (Processing) - Effluents - Determination of Biochemical Oxygen Demand (BOD) and Dissolved Oxygen (DO)

PL-PKN, bod+meter

  • PN C04578 ArkusZ06-1974 Werter ond w?sie 'woter Tests lor chemica! oxygen demand ond of organie cci bon content Datermination of biochemical twygen (BOD) by manometrie melhod
  • PN C04262-1955 RUBBERIZED FABRIC -- DETERMINATION OF PERMEABILITY BY SCHOPPER MACHINE
  • PN T06500-02-1985 Electronic measuring instruments Terms and definitions
  • PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus

Professional Standard - Commodity Inspection, bod+meter

  • SN/T 2497.29-2010 Test method of import and export dangerous chemicals-Part 29: Biochemical oxygen demand (BOD) test
  • SN/T 1083.3-2002 Determination of sulfur content in coke.Instrumental method

American National Standards Institute （ANSI), bod+meter

  • ANSI IT4.40-1996 Photography (Processing) - Effluents - Determination of Biochemical Oxygen Demand (BOD) and Dissolved Oxygen (DO) Revision and Redesignation of ANSI PH4.40-1984
  • ANSI/NAPM IT4.40-1996 Photography (Processing) - Effluents - Determination of Biochemical Oxygen Demand (BOD) and Dissolved Oxygen (DO) (revision and redesignation of ANSI PH4.40-1984 (R1992))
  • ANSI/TAPPI T1215 sp-2012 The determination of instrumental color differences
  • ANSI/T 1215 SP-2021 The determination of instrumental color differences

German Institute for Standardization, bod+meter

  • DIN EN 1899-2:1998-05 Water quality - Determination of biochemical oxygen demand after n days (BOD<(Index)n>) - Part 2: Method for undiluted samples (ISO 5815:1989, modified); German version EN 1899-2:1998
  • DIN EN ISO 5815-1:2020-11 Water quality - Determination of biochemical oxygen demand after n days (BOD<(Index)n>) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815-1:2019); German version EN ISO 5815-1:2019
  • DIN 33865:1998 Information Technology - Plotters - Determination of the performance of monochrome plotters
  • DIN VDE 0493 Bb.2:2007 Radiation protection instrumentation - Determination of uncertainty in measurement (IEC/TR 62461:2006)
  • DIN 43834:1982 Measurement and control; fastening for measuring and control instruments for panel mounting; fastening component; fastening holes in the instrument
  • DIN EN 61143-1/A1:1998-12 Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements; Amendment A1 (IEC 61143-1:1992/A1:1997); German version EN 61143-1:1994/A1:1997
  • DIN EN ISO 21546:2021-02 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019); German version EN ISO 21546:2020
  • DIN 18724:1990 Geodetic instruments; precision of levels and theodolites from technical data
  • DIN CEN ISO/TS 19397:2018-05*DIN SPEC 55661:2018-05 Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015); German version CEN ISO/TS 19397:2018
  • DIN EN 60846:2005 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation (IEC 60846:2002, modified); German version EN 60846:2004
  • DIN 25456-1:1999 Neutron fluence measurement - Part 1: Fast-neutron fluence determination with activation and fission detectors

Professional Standard - Machinery, bod+meter

Professional Standard - Light Industry, bod+meter

工业和信息化部, bod+meter

Professional Standard - Traffic, bod+meter

Professional Standard - Aquaculture, bod+meter

Japanese Industrial Standards Committee (JISC), bod+meter

Korean Agency for Technology and Standards (KATS), bod+meter

  • KS I 2218-2009 Detector tube type gas measuring instruments
  • KS M 7096-2018 Paper — Determination of stiffness by Clark stiffness tester
  • KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
  • KS C IEC 61888:2012 Nuclear power plants－Instrumentation important to safety－Determination and maintenance of trip setpoints
  • KS B ISO 12857-2-2002(2022) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 2：Theodolites
  • KS B ISO 12857-1-2002(2022) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 1：Levels
  • KS C IEC 61143-1-2013(2018) Electrical measuring instruments－X-t recorders－Part 1：Definitions and requirements
  • KS C IEC 60846-1:2014 Radiation protection instrumentation — Ambient and/or directional dose equivalent(rate) meters and/or monitors for beta, X and gamma radiation — Part 1: Portable workplace and environmental meters and monitors
  • KS C IEC 61143-1:2013 Electrical measuring instruments－X-t recorders－Part 1：Definitions and requirements
  • KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
  • KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
  • KS R 3033-1984 Simplified carbonmonoxide testers for automobiles

RO-ASRO, bod+meter

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, bod+meter

轻工业部, bod+meter

Professional Standard - Military and Civilian Products, bod+meter

  • WJ 2539-1999 Verification Regulations for Temperature Measuring Diode Meter
  • WJ 2386-1997 Verification Regulations for Electronic Time Meter
  • WJ 2262-1994 Verification Regulations for Thermal Conductivity Meter
  • WJ 2298-1995 CS-244/344 Carbon and Sulfur Meter Verification Regulations
  • WJ 2250-1994 Verification Regulations for Activated Carbon Specific Surface Area Meter
  • WJ 2293-1995 Verification rules for microscope temperature platform melting point tester
  • WJ 2398-1997 Verification regulations for barrel rifling measuring instrument
  • WJ 2276-1995 Verification rules for activated carbon and impregnated carbon particle size analyzer
  • WJ 2282-1995 Verification regulations for protective equipment ventilation resistance tester
  • WJ 2283-1995 Verification rules for activated carbon and impregnated carbon strength tester

Military Standard of the People's Republic of China-General Armament Department, bod+meter

机械工业部, bod+meter

  • JB/T 7395.5-1994 Electrical measuring instruments terminology standard, detector, stable power supply and comparative measuring instrument

CZ-CSN, bod+meter

  • CSN 62 1481-1983 Determination of rubber elasticity on a Lupke tester
  • CSN 25 7632-1970 Butyrometers for dried milk
  • CSN ISO 2759:1993 Board. Determination of bursting strength
  • CSN 72 1027-1983 Laboratory determination of soil compressibility in the oedometer apparatus
  • CSN 42 0669 Cast.6-1985 Chemical analysis of non-ferrous metals and alloys. Cobalt. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN 42 0691 Cast.4-1985 Chemical analysis of non-ferrous metals and alloys. Titanium. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN 42 0669 Cast.7-1985 Chemical analysis of non-ferrous metals and alloys. Cobalt. Determination of sulphur by the titrimetric method and methods with the use of automatic analyzers
  • CSN 70 4246-1973 Glass apparatus for the determination of arsenic, antimony and tin
  • CSN 57 0536-1999 Determination of milk composition by mid-infrared analyzer
  • CSN 42 0620 Cast.16-1981 Chemical analysis of non-ferrous metals and alloys. Brasses. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN 42 0622 Cast.20-1981 Chemical analysis of non-ferrous metals and alloys. Bronzes. Determination of carbon by the titrimetric method and methods with the use of automatic analyzers
  • CSN 35 6533-1986 Electronic measuring instruments. DC stabilized power supply.
  • CSN 25 8148-1966 Thermometers for determination of softening point by means of ring- and-ball apparatus
  • CSN 70 4242-1967 Glass apparatus for the determination of sulphur in technical iron
  • CSN 70 4245-1967 Glass elements for the determination of aluminium in technical iron

Professional Standard - Textile, bod+meter

中国轻工总会, bod+meter

  • ZBW 0017-1989 Yarn diameter measurement method CCD measuring instrument method

Professional Standard - Nuclear Industry, bod+meter

  • EJ/J 1-2007 Verification regulation for gamma-ray logger
  • EJ/T 826-1994 Specifications for the design of the calibration shed for gamma measuring instruments in uranium mines
  • EJ/T 904-1994 Single Photon Bone Mineral Densitometer
  • EJ/T 1011-1996 Fixed neutron dose equivalent rate meter, alarm device and monitor

Professional Standard - Building Materials, bod+meter

Professional Standard - Grain, bod+meter

Professional Standard - Agriculture, bod+meter

工业和信息化部/国家能源局, bod+meter

Association Francaise de Normalisation, bod+meter

  • NF EN 61143-1/A1:1998 Appareils électriques de mesure - Enregistreurs X-t - Partie 1 : définitions et prescriptions.
  • NF EN 61143-1:1994 Appareils électriques de mesure - Enregistreurs X-t - Partie 1 : définitions et prescriptions.
  • NF C42-141/A1:1980 Electrical measuring instruments - X-t recorders Part 1:Definitions and requirements
  • NF X20-352:1976 Dioxide sulphur determination by mass spectrometry.
  • NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.
  • NF C19-102:2005 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation.

国家煤矿安全监察局, bod+meter

  • MT/T 1195-2020 Calibration procedures for carbon and hydrogen analyzers in coal

International Organization for Standardization (ISO), bod+meter

  • ISO 7205:1986 Radionuclide gauges; Gauges designed for permanent installation
  • ISO 8322-4:1991 Building construction — Measuring instruments — Procedures for determining accuracy in use — Part 4: Theodolites
  • ISO 8322-7:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 7: instruments when used for setting out

Professional Standard - Medicine, bod+meter

Professional Standard - Petroleum, bod+meter

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, bod+meter

  • GB/T 32208-2015 Chemical oxygen demand meters
  • GB/T 1538-1979 Determination of paper board folding strength(Shawbel's)
  • GB/T 32267-2015 Terminology of performance testing for analytical instrument
  • GB/T 26793-2011 Coulometry micro water teller
  • GB/Z 41289-2022 Non-destructive testing instruments—Evaluation procedures
  • GB/T 6689-1986 Determination of colour difference of dyes(Instrumental method)
  • GB/T 15953-1995 Instruments for the measurement of aural acoustic impedance/admittance
  • GB/T 24867-2010 Determination of moisture content of forage seed-Moisture meters method
  • GB/T 30733-2014 Determination of total carbon, hydrogen and nitrogen content in coal.Instrumental method
  • GB/T 17860.1-1999 Electrical measuring instruments--X-t recorders Part 1: Definitions and requirements
  • GB/T 31427-2015 Specification for determinator of coal ash fusibility

Professional Standard - Surveying and Mapping, bod+meter

  • CH 8001-1991 Specification on calibration of electro-optical distance measuring instrument
  • CH 8017-1999 Verification Regulation for the Genaral Accuracy of Aerophotogrammetric Instruments

Professional Standard - Construction Industry, bod+meter

Professional Standard - Chemical Industry, bod+meter

Professional Standard - Railway, bod+meter

  • TB/T 3129-2006 Measurement machines for wheel-weight of railway vehicles

National Metrological Technical Specifications of the People's Republic of China, bod+meter

Henan Provincial Standard of the People's Republic of China, bod+meter

Professional Standard - Aerospace, bod+meter

Professional Standard - Ocean, bod+meter

国家铁路局, bod+meter

International Electrotechnical Commission (IEC), bod+meter

  • IEC TR 62461:2006 Radiation protection instrumentation - Determination of uncertainty in measurement
  • IEC TR 62461:2015 Radiation protection instrumentation - Determination of uncertainty in measurement
  • IEC 61143-1:1992 Electrical measuring instruments; X-t recorders; part 1: definitions and requirements
  • IEC 61143-1:1998 Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements
  • IEC 60846:2002 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation

ES-AENOR, bod+meter

Hunan Provincial Standard of the People's Republic of China, bod+meter

Standard Association of Australia （SAA）, bod+meter

  • AS 2162.2:1998 Verification and use of volumetric apparatus - Guide to the use of piston-operated volumetric apparatus (POVA)
  • AS/NZS 1591.4:1995 Acoustics - Instrumentation for audiometry - A mechanical coupler for calibration of bone vibrators
  • IEC 61143-1:1992+AMD1:1997 CSV Electrical measuring instruments — X-t recorders — Part 1: Definitions and requirements

British Standards Institution (BSI), bod+meter

  • BS EN 61143-1:1994 Specification for electrical measuring instruments. X-t recorders - Definitions and requirements
  • BS 7334-7:1992 Measuring instruments for building construction - Methods for determining accuracy in use of instruments when used for setting out
  • BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
  • BS EN 60846-1:2014 Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation. Portable workplace and environmental meters and monitors
  • BS EN ISO 5402-1:2017 Leather. Determination of flex resistance. Flexometer method
  • BS EN ISO 5402-1:2011 Leather. Determination of flex resistance. Flexometer method
  • BS EN ISO 21546:2020 Paints and varnishes. Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
  • BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
  • BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
  • BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
  • BS IEC 61888:2003 Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip setpoints
  • BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers

Professional Standard - Electricity, bod+meter

  • DL/T 967-2005 Verification regulation of loop resistance tester and DC resistance high-speed tester
  • DL/T 1473-2016 Verification Regulations for Electrical Measuring and Indicating Instruments

The American Road & Transportation Builders Association, bod+meter

  • AASHTO T 199-2000 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Chace Indicator

U.S. Military Regulations and Norms, bod+meter

Professional Standard - Water Conservancy, bod+meter

  • SL 78-1994 Determination of conductivity (Conductivity instrument method)
  • SL 124-2014 Calibration methods for testing instrument of hydration heat of cement

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, bod+meter

RU-GOST R, bod+meter

  • GOST 8.411-1981 State system for ensuring the uniformity of measurements. Lever microme ters. Rules and procedure of verification
  • GOST 25935-1983 Dosimetric instruments. Methods of measuring main parameters
  • GOST R 50381-1992 Photogrammetric instruments. Terms and definitions
  • GOST 4.361-1985 Product-quality index system. Mass-spectrometric analysers. Index nomenclature
  • GOST R 50701-1994 Telescopic observation instruments. Terms and definitions
  • GOST 17562-1972 Measuring instruments for functional diagnostic. Terms and definitions

国家能源局, bod+meter

  • SY/T 5382-2009 Drilling fluid solid phase content measuring instrument
  • NB/T 10368-2019 Mining drilling trajectory measuring instrument while drilling

Hubei Provincial Standard of the People's Republic of China, bod+meter

  • DB42/T 1681-2021 Calibration technical specification for lightning location detector

VN-TCVN, bod+meter

  • TCVN 5241-1990 Sewing thread.Method for determination of diameter on thickness tester

国家市场监督管理总局、中国国家标准化管理委员会, bod+meter

  • GB/T 37906-2019 Reclaimed water quality—Determination of mercury—Mercury analyzer method
  • GB/T 37361-2019 Determination of the film thickness—Ultrasonic thickness gauge method

ES-UNE, bod+meter

  • UNE-EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)

United States Navy, bod+meter

Professional Standard - Coal, bod+meter

  • MT/T 708-1997 Technical condition of the instrument for determing the susceptibility of coal

Society of Automotive Engineers (SAE), bod+meter

American Society for Testing and Materials (ASTM), bod+meter

  • ASTM E236-66(2006) Standard Specification for Apparatus For Microdetermination Of Alkoxyl Groups

Taiwan Provincial Standard of the People's Republic of China, bod+meter

  • CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method

GOSTR, bod+meter

Professional Standard - Electron, bod+meter

  • SJ 20262-1993 Verification regulation of model HS6110 electtroacoustic test system
  • SJ 20225-1993 Verification regulation of LF group delay measuring set
  • SJ 20240-1993 Verification regulation of model HP4284A LCR precise measurement instruments
  • SJ 20235-1993 Verification regulation of model IC-1500 automatic tester

煤炭工业部, bod+meter

  • MT 228-1990 Technical conditions of carbon and hydrogen analyzer in coal

未注明发布机构, bod+meter

  • BS IEC 61428:1998(1999) Nuclear instrumentation — Sample containers for gamma - ray spectrometry with Ge - detectors
  • BS EN 61143-1:1994(1999) Electrical measuring instruments — X - t recorders — Part 1 : Definitions and requirements

AENOR, bod+meter

Danish Standards Foundation, bod+meter

  • DS/EN 61143-1/A1:1998 Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements
  • DS/EN 61143-1:1996 Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements

American Society of Mechanical Engineers (ASME), bod+meter

Jilin Provincial Standard of the People's Republic of China, bod+meter

  • DB22/T 1979-2013 Determination of Mercury in Cosmetics Automatic Mercury Meter Method

Instrument Society of America (ISA), bod+meter

  • ISA RP67.04.02-2010 Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation

Ningxia Provincial Standard of the People's Republic of China, bod+meter

European Committee for Electrotechnical Standardization（CENELEC）, bod+meter

Professional Standard - Non-ferrous Metal, bod+meter

  • YS/T 964-2014 Determinator for the reactivity to air of carbon block used in the production of aluminium

ZA-SANS, bod+meter

  • SANS 5631:1972 Determination of water absorption of leather (Kubelka apparatus)

National Electrical Manufacturers Association（NEMA), bod+meter

IN-BIS, bod+meter

  analyser, Pore meter, Element analyzer, Hydrocarbon Meter, Stress Tester, Particle size analyzer, Hydrocarbon Meter, Oxygen Meter, value tester, sex tester, Combustion Tester, Deuterium detector, Gas analyzer, Particle Analyzer, Measuring instrument, cod tester/cod fast tester, bod+, bod+meter, bod tester/bod rapid tester, cod tester fast cod tester.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved