ZH
RU
ES

Gas phase solid

Gas phase solid, Total:494 items.

In the international standard classification, Gas phase solid involves: Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Natural gas, Fuels, Fluid storage devices, Accident and disaster control, Analytical chemistry, Products of the chemical industry, Protection of and in buildings, Vocabularies, Insulating fluids, Welding, brazing and soldering, Electrical engineering in general, Non-metalliferous minerals, Optics and optical measurements, Horology, Installations in buildings, Air quality, Organic chemicals, Power stations in general, Testing of metals, Valves, Geology. Meteorology. Hydrology, Raw materials for rubber and plastics, Petroleum products in general, Occupational safety. Industrial hygiene, Electrical equipment for working in special conditions, Environmental protection, Measurement of volume, mass, density, viscosity, Burners. Boilers, Domestic, commercial and industrial heating appliances, Soil quality. Pedology, Hydraulic fluids, Protection against crime, Water quality, Farming and forestry, Pipeline components and pipelines, Internal combustion engines, Beverages, Surface treatment and coating, Edible oils and fats. Oilseeds, Test conditions and procedures in general, General methods of tests and analysis for food products, Refrigerating technology, Compressors and pneumatic machines, Aerospace engines and propulsion systems, Plastics, Fibre optic communications, Protection against excessive pressure, Rubber, Rubber and plastics products, Glass, Electromechanical components for electronic and telecommunications equipment, Fluid power systems, Medical equipment, Domestic electrical appliances in general, Laundry appliances, Fishing and fish breeding, Finances. Banking. Monetary systems. Insurance, Materials and articles in contact with foodstuffs, Electronic components in general, Insulation, Wastes, Nuclear energy engineering.

工业和信息化部, Gas phase solid

HG/T 5997-2022 Gas phase cyclone-liquid phase jet gas purifier

YU-JUS, Gas phase solid

JUS H.F8.122-1986 Gases. Determination of oxygen content. Gas chromatographic method
JUS H.F8.231-1986 Gases. Determination of hydrocarbons content Gas chromatographic metbod
JUS H.F8.132-1986 Gases. Determination of nitrogen content. Gas chromatographic method
JUS H.F8.152-1986 Gases. Determination ofcarbon dioxid content. Gas chromatographic methctC/
JUS K.M6.027-1991 Gas tightness of equipment for gas welding and allied processes
JUS K.M6.020-1987 Lowpipes for manual gas welding, cutting and related processes
JUS K.M6.015-1991 Materials for equipment used in gas welding, cutting and allied processes
JUS H.F8.308-1991 Natura! gas. Determinatlon of hydrogen, inert gases and hy?rocarbons up to C Gas cbromatographic method

German Institute for Standardization, Gas phase solid

DIN 51894:2012 Gas analysis - Gas chromatographic method for fuel gases/natural gas and other gas mixtures
DIN 51894:2012-09 Gas analysis - Gas chromatographic method for fuel gases/natural gas and other gas mixtures
DIN 51872-4:1990 Testing of gaseous fuels and other gases; determination of the components; gaschromatographic procedure
DIN EN ISO 14456:2023-03 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO/DIS 14456:2023); German and English version prEN ISO 14456:2023 / Note: Date of issue 2023-02-10*Intended as replacement for DIN EN ISO 14456 (2019-10).
DIN EN ISO 14456:2019-10 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015 + Amd.1:2019); German version EN ISO 14456:2016 + A1:2019
DIN 1871:1999 Gaseous fuels and other gases - Density and other volumetric quantities
DIN 51872-4:1990-06 Testing of gaseous fuels and other gases; determination of the components; gaschromatographic procedure
DIN EN ISO 14175:2008-06 Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008); German version EN ISO 14175:2008
DIN 51857:1997 Gaseous fuels and other gases - Calculation of calorific value, density, relative density and Wobbe index of pure gases and gas mixtures
DIN EN ISO 14456:2023 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO/DIS 14456:2023); German and English version prEN ISO 14456:2023
DIN 51870:1981 Testing of gaseaus fuels and other gases; determination of relative density according to the balance method and calculation of density
DIN 50450-4:1993 Testing of materials for semiconductor technology; determination of impurities in carrier gases and dopant gases; determination of C<(Index)1>-C<(Index)3>-hydrocarbons in nitrogen by gas-chromatography
DIN EN 16423:2014-02 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection; German version EN 16423:2013
DIN EN ISO 20765-2:2018-12 Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application (ISO 20765-2:2015); German version EN ISO 20765-2:2018
DIN 8541-2:1987 Hoses for welding, cutting and allied processes; hoses with protective cover for use with fuel gas, oxygen and other non-combustible gases
DIN EN ISO 14456:2016 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015); German version EN ISO 14456:2016
DIN EN ISO 10882-2:2001-04 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000); German version EN ISO 10882-2:2000
DIN EN ISO 10882-2:2023-06 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023); German and English version prEN ISO 10882-2:2023 / Note: Date of issue 20...
DIN EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
DIN EN ISO 20765-2:2018 Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application (ISO 20765-2:2015)
DIN EN ISO 10882-2:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000); German version EN ISO 10882-2:2000
DIN EN ISO 14456:2019 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015 + Amd.1:2019) (includes Amendment :2019)
DIN EN 12177:2023-01 Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography; German version EN 12177:2022
DIN 50450-4:1993-09 Testing of materials for semiconductor technology; determination of impurities in carrier gases and dopant gases; determination of C<(Index)1>-C<(Index)3>-hydrocarbons in nitrogen by gas-chromatography
DIN EN ISO 11114-3:2011-04 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010); German version EN ISO 11114-3:2010
DIN EN 17503:2020 Environmental solid matrices - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC); German and English version prEN 17503:2020
DIN EN ISO 11114-2:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO/DIS 11114-2:2020); German and English version prEN ISO 11114-2:2020
DIN EN ISO 10121-1:2015 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gas-phase air cleaning media (ISO 10121-1:2014); German version EN ISO 10121-1:2014
DIN EN ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gas-phase air cleaning media (ISO 10121-1:2014); German version EN ISO 10121-1:2014
DIN 51899:2010-09 Gas analysis - Measurement programs and data evaluation procedures for gas chromatography and other comparison methods; only on CD-ROM / Note: To be amended by DIN 51899/A1 (2022-01).
DIN 51855-7:1986-12 Testing of gaseous fuels and other gases; determination of the content of sulfur compounds; gaschromatographic determination of the content of odoriferous sulfur compounds using an electrochemical detector
DIN EN ISO 6401:2023-03 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer using gas-chromatographic method (ISO 6401:2022); German version EN ISO 6401:2022
DIN 51855-7:1986 Testing of gaseous fuels and other gases; determination of the content of sulfur compounds; gaschromatographic determination of the content of odoriferous sulfur compounds using an electrochemical detector
DIN EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method; German version EN 14667:2005
DIN EN 14667:2005-09 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method; German version EN 14667:2005

Compressed Gas Association (U.S.), Gas phase solid

CGA E-16-2008 Compressed gas check valves up to 3000 PSIG
CGA E-11-2008 Stationary compressed gas cylinder discharging manifolds for working pressures up to 3000 PSIG

HU-MSZT, Gas phase solid

International Organization for Standardization (ISO), Gas phase solid

ISO 14456:2015 Gas cylinders - Gas properties and associated classification (FTSC) codes
ISO 21010:2004 Cryogenic vessels - Gas/materials compatibility
ISO 21010:2017 Cryogenic vessels - Gas/material compatibility
ISO 21010:2014 Cryogenic vessels - Gas/materials compatibility
ISO 14175:2008 Welding consumables - Gases and gas mixtures for fusion welding and allied processes
ISO 14456:2015/Amd 1:2019 Gas cylinders — Gas properties and associated classification (FTSC) codes — Amendment 1
ISO 6974:1984 Natural gas; Determination of hydrogen, inert gases and hydrocarbons up to C8; Gas chromatographic method
ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gas-phase air cleaning media
ISO/DIS 14068 Greenhouse gas management and climate change management and related activities — Carbon neutrality
ISO/FDIS 14068:2011 Greenhouse gas management and climate change management and related activities — Carbon neutrality
ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
ISO 20765-2:2015 Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application
ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
ISO 14080:2018 Greenhouse gas management and related activities - Framework and principles for methodologies on climate actions
ISO 9539:2010 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
ISO/TS 29041:2008 Gas mixtures - Gravimetric preparation - Mastering correlations in composition
ISO 11114-2:2000 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
ISO 5918:1982 Chlorofluorohydrocarbons for industrial use; Determination of inert gas content; Gas chromatographic method; General principles
ISO 9539:2010/Amd 1:2013 Gas welding equipment.Materials for equipment used in gas welding, cutting and allied processes; Amendment 1
ISO/DIS 10882-2 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases
ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method
ISO 5784-2:1989 Fluid power systems and components; fluid logic circuits; part 2: symbols for supply and exhausts as related to logic symbols
ISO 5171:2019 Gas welding equipment — Pressure gauges used in welding, cutting and allied processes
ISO 6401:2022 Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer using gas-chromatographic method
ISO/CD TS 19870:2011 Methodology for Determining the Greenhouse Gas Emissions Associated with the Production, Conditioning and Transport of Hydrogen to Consumption Gate
ISO/DTS 19870:2023 Methodology for Determining the Greenhouse Gas Emissions Associated with the Production, Conditioning and Transport of Hydrogen to Consumption Gate
ISO 7396-1:2007/Amd 3:2013 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 3: Terminology relating to alarm systems
ISO 10882-2:2000 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases
ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas phase solid

GB 16912-1997 Safety technical regulation for oxygen and relative gases
GB/T 28726-2012 Gas analysis.Gas chromatograph with helium ionization detector
GB/T 8981-1988 Determination of trace hydrogen in gases--Gas chromatographic method
GB/T 8981-2008 Determination of trace hydrogen in gases.Gas chromatographic method
GB/T 32484-2016 Watch-cases and accessories.Vapour phase deposited coatings
GB/T 32484-2022 Watch case and its accessories vapor deposition coating
GB/T 31400-2015 Fluorinated alkane.Determination of non condensable gas (NCG).Gas chromatography
GB/T 28727-2012 Gas analysis.Determination of sulfides.Gas chromatograph with flame photometric detector
GB/T 17623-1998 Determination of componental contents of gases dissolved in insulating oil by gas chromatography method
GB 16912-2008 Safety technical regulation for oxgen and relative gases produced with cryogenic method
GB/T 28124-2011 Determination of trace hydrogen,oxygen,methane and carbon monoxide in the inert gases. Gas chromatographic method
GB/T 31481-2015 Guidance for gas/materials compatibility of cryogenic vessels
GB/T 4615-2013 Poly (vinyl chloride).Determination of residual vinyl chloride monomer.Gas-chromatographic method
GB/T 8984-2008 Determination of carbon monoxide, carbon dioxide and hydrocarbon in gases. Gas chromatographic method
GB/T 29616-2013 Thermoplastic elastomer.Determination of polycyclic aromatic hydrocarbons.Gas chromatography-mass spectrometry
GB/T 4614-1984 Determination of residual styrene monomer in polystyrene by gas chromatography
GB/T 23296.13-2009 Food contact materials.Determination of vinyl chloride monomer in plastics.Gas chromatography
GB/T 4615-2008 Poly(vinyl chloride).Determination of residual vinyl chloride monomer content.Gas chromatographic method

Association Francaise de Normalisation, Gas phase solid

NF X20-303:1974 GAS ANALYSIS BY MEANS OF GAS CHROMATOGRAPHY.
NF E29-763*NF EN ISO 14456:2016 Gas cylinders - Gas properties and associated classification (FTSC) codes
NF EN ISO 14456:2016 Bouteilles à gaz - Propriétés des gaz et codes de classification associés (FTSC)
NF EN ISO 14175:2008 Produits consommables pour le soudage - Gaz et mélanges gazeux pour le soudage par fusion et les techniques connexes
NF EN ISO 23157:2022 Détermination de la teneur en groupes silanol à la surface de la silice pyrogénée - Méthode par analyse chromatographique en phase gazeuse des gaz de réaction
NF X20-363:1978 GAS ANALYSIS. DETERMINATION OF CARBON MONOXIDE BY MEANS OF GAS CHROMATOGRAPHY.
NF X20-501:1985 Gas analysis. Analysis of natural gas without condensate. Method by gas chromatography.
NF E29-763/A1*NF EN ISO 14456/A1:2019 Gas cylinders - Gas properties and associated classification (FTSC) codes - Amendment 1
NF EN ISO 14456/A1:2019 Bouteilles à gaz - Propriétés des gaz et codes de classification associés (FTSC) - Amendement 1
NF X20-530:1984 Natural gas. Determination of water and methanol contents. Gas chromatographic method.
NF A84-531:2014 Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes
NF A84-531*NF EN ISO 10225:2021 Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes
NF X44-016-1*NF EN ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1 : gas-phase air cleaning media
NF EN ISO 20765-2:2018 Gaz naturel - Calcul des propriétés thermodynamiques - Partie 2 : propriétés des phases uniques (gaz, liquide, fluide dense) pour une gamme étendue d'applications
NF M07-083:1995 Liquid fuels. Identificxation of colza methyl ester inmiddle distillate. Method by liquid and gas chromatography.
NF E29-648-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1 : metallic materials.
NF E29-648-1*NF EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1 : metallic materials
NF X30-369*NF ISO 14080:2018 Greenhouse gas management and related activities - Framework and principles for methodologies on climate actions
NF X20-543-2*NF EN ISO 20765-2:2018 Natural gas - Calculation of thermodynamic properties - Part 2 : single-phase properties (gas, liquid, and dense fluid) for extended ranges of application
NF E29-648-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: non-metallic materials
NF EN ISO 11114-6:2022 Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 6 : essai de compression adiabatique à l'oxygène
UTE C26-170U*UTE C26-170:1986 Solid insulating materials. Vulcanized fibre for electrical purposes. Relevant article sheets.
NF E86-505-1:1998 Cryogenic vessels. Gas/material compatibility. Part 1 : oxygen compatibility.
NF A84-039*NF EN ISO 9539:2010 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
NF E29-648-2*NF EN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials
NF X43-100*NF ISO 7708:1996 Air quality. Particle size fraction definitions for health-related sampling.
NF A84-039/A1*NF EN ISO 9539/A1:2014 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes - Amendment 1
NF A88-202-2*NF EN ISO 10882-2:2000 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2 : sampling of gases
NF A84-440:2009 Equipement for gas welding and allied processes - Pressure reduction station for compressed liquefied gas - Equipment - Setting up - Checking
NF ISO 14080:2018 Gestion des gaz à effet de serre et activités associées - Cadre et principes des méthodologies applicables aux mesures en faveur du climat
NF T51-706*NF EN ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method
NF EN 12177:2022 Produits pétroliers liquides - Essence sans plomb - Détermination de la teneur en benzène par chromatographie en phase gazeuse
NF EN ISO 6401:2022 Plastiques - Poly(chlorure de vinyle) - Détermination du chlorure de vinyle monomère résiduel par la méthode de chromatographie en phase gazeuse
NF EN ISO 17652-4:2003 Soudage - Essai sur peintures primaires en relation avec le soudage et les techniques connexes - Partie 4 : émission des fumées et des gaz
NF D35-323:1991 Heating. Gas. Liquid fuel, solid fuel. Gas hurning appliances for instantaneous production of hot water for domestic use, intended to be connected to a mechanical installation for the evacuation of combustion products.
NF A88-202-1*NF EN ISO 10882-1:2011 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1 : sampling of airborne particles.
NF S90-116:2020 Medical gas pipeline distribution systems - Sockets and related probes for medical fluids - Design and installation
NF EN 17322:2020 Matrices solides environnementales - Dosage des polychlorobiphényles (PCB) par chromatographie en phase gazeuse-spectrométrie de masse (CG-SM) ou chromatographie en phase gazeuse avec détection par capture d'électrons (CG-ECD)
NF EN ISO 11114-3:2011 Bouteilles à gaz - Compatibilité des matériaux de bouteilles et de robinets avec les contenus gazeux - Partie 3 : essai d'auto-inflammation des matériaux non métalliques sous atmosphère d'oxygène
NF EN 62358:2013 Noyaux de ferrite - Inductance spécifique normalisée pour noyaux à entrefer et tolérances associées
NF E29-648-5*NF EN ISO 11114-5:2022 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5 : test methods for evaluating plastic liners
NF EN ISO 11114-5:2022 Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 5 : méthodes d'essai pour l'évaluation des liners en plastique
NF M07-112:2004 Produits pétroliers liquides - Dosage du benzène dans les combustibles liquides pour appareils mobiles de chauffage - Méthode par chromatographie capillaire en phase gazeuse
NF A84-440:1991 Equipment for gas welding and allied processes. Pressure reduction station for compressed dissolved and liquefied gas. Equipment. Setting up. Tests
NF A84-533:1999 Gas welding equipment - Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes
NF S95-155/A3:2013 Medical gas pipeline systems - Part 1: pipeline systems for compressed medical gases and vacuum - Amendment 3 : terminology relating to alarm systems
NF ISO 5784-3:1990 Transmissions hydrauliques et pneumatiques - Logique par les fluides - Partie 3 : symboles pour opérateurs séquentiels et fonctions connexes.
NF EN 14667:2005 Agents de surfaces - Détermination des solvants à faible point d'ébullition dans les formulations liquides - Méthode par chromatographie en phase gazeuse

CEN - European Committee for Standardization, Gas phase solid

EN 1797-1:1998 Cryogenic Vessels - Gas/Material Compatibility - Part 1: Oxygen Compatibility
EN ISO 20765-2:2018 Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas@ liquid@ and dense fluid) for extended ranges of application
EN ISO 6401:2004 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Gas chromatographic method

Group Standards of the People's Republic of China, Gas phase solid

T/CSTM 00613-2023 Fumed powder microporous thermal insulation products
T/CEC 673.1-2022 Perfluoroisobutyronitrile Gas Purity Test Method Part 1: Gas Chromatography
T/GAIA 004-2020 Determination of eleven odor compounds in water by headspace solid phase microextraction coupled with gas chromatography-mass spectrometry
T/CES 047-2020 Technical specifications for helium ionization gas chromatographic of gas analysis in transformer oil
T/LCAA 005-2021 Determination of methane, nitrous oxide and carbon dioxide concentrations in gases——gas chromatography method
T/SBX 041-2021 Determination of Purity of Tricyclic Alkyne Liquid Crystal Monomer by Gas Chromatography
T/SBX 044-2021 Determination of Purity of Terphenyl Liquid Crystal Monomers by Gas Chromatography
T/SBX 070-2022 Determination of Purity of Alkyl Biphenyl Liquid Crystal Monomers by Gas Chromatography
T/QGCML 892-2023 Plasma Chemical Vapor Deposition Optical Fiber Preform Preparation Equipment
T/SDAQI 011-2021 Determination of phthalate esters in solid air freshener Gaschromatography-mass spectrometry method
T/CIESC 0021-2022 Standard Test Method for Permanent Gases in Polymer Grade Ethylene and Propylene by Gas Chromatography and Helium Ionization Detector
T/SBX 042-2021 Determination of Purity of Bicyclohexylbiphenyl Liquid Crystal Monomers by Gas Chromatography
T/SBX 069-2022 Determination of Purity of Alkylcyclohexylbiphenyl Liquid Crystal Monomers by Gas Chromatography
T/CEC 542.2-2022 General technical requirements for gas testing instruments for electric power Part 2: Gas chromatography for sulfur hexafluoride gas purity testers
T/SBX 043-2021 Determination of Purity of Dicyclohexyl Phenyl Liquid Crystal Monomers by Gas Chromatography
T/ZJATA 0017-2023 Chemical vapor deposition (CVD) epitaxy equipment for preparing silicon carbide semiconductor materials

American Society for Testing and Materials (ASTM), Gas phase solid

ASTM UOP759-76 Trace Oxygen in Gases by Gas Chromatography
ASTM D2864-07 Standard Terminology Relating to Electrical Insulating Liquids and Gases
ASTM D4150-00 Standard Terminology Relating to Gaseous Fuels
ASTM D4150-03 Standard Terminology Relating to Gaseous Fuels
ASTM D4150-08 Standard Terminology Relating to Gaseous Fuels
ASTM D4150-08(2016) Standard Terminology Relating to Gaseous Fuels
ASTM D2864-06 Standard Terminology Relating to Electrical Insulating Liquids and Gases
ASTM D2864-10e1 Standard Terminology Relating to Electrical Insulating Liquids and Gases
ASTM D1946-90(2000) Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM D1946-90(1994)e1 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM UOP735-73 Hydrogen Content of Gases by Gas Chromatography
ASTM D1946-90(2019) Standard Practice for Analysis of Reformed Gas by Gas Chromatography
ASTM D2864-10 Standard Terminology Relating to Electrical Insulating Liquids and Gases
ASTM D4150-23a Standard Terminology Relating to Gaseous Fuels
ASTM UOP709-70 Gas Analysis by Gas Chromatography Using a Two - Injection Technique
ASTM F1376-92(2005) Standard Guide for Metallurgical Analysis for Gas Distribution System Components
ASTM UOP114-86 Relative Density of Gas by Schilling Effusion Method
ASTM D7833-12 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
ASTM D7833-14 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
ASTM D1070-03 Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D1070-03(2010) Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D1070-85(1998) Standard Test Methods for Relative Density of Gaseous Fuels
ASTM D1070-03(2017) Standard Test Methods for Relative Density of Gaseous Fuels
ASTM UOP373-08 Composition of C₂ Through C₅ Hydrocarbon Gas Mixtures by Gas Chromatography
ASTM UOP948-07 Relative Density of Gas Mixtures by Calculation From Composition
ASTM UOP948-96 Relative Density of Gas Mixtures by Calculation From Composition
ASTM D1137-53 Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer
ASTM D7164-21 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM UOP373-83 Composition of C2 Through C5 Hydrocarbon Gas Mixtures by Gas Chromatography
ASTM D3588-98 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D3588-98(2003) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM D5534-94(2011)e1 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM D3612-02(2017) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
ASTM F1376-92(2012) Standard Guide for Metallurgical Analysis for Gas Distribution System Components
ASTM D3612-96 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
ASTM D3612-01 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
ASTM D7164-05 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D3612-02e1 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
ASTM D7606-17 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
ASTM D2504-88(2004)e1 Standard Test Method for Noncondensable Gases in C₂ and Lighter Hydrocarbon Products by Gas Chromatography
ASTM D7164-10 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D2504-67(1977) Standard Test Method for Noncondensable Gases In C3 And Lighter Hydrocarbon Products By Gas Chromatography
ASTM D7756-18 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D7756-19 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
ASTM D7165-22 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
ASTM D3465-21 Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D5599-00(2005) Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D5599-00 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D7165-10 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
ASTM D7164-10(2015) Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM D5599-00(2010) Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D2504-88(2010) Standard Test Method for Noncondensable Gases in C₂ and Lighter Hydrocarbon Products by Gas Chromatography
ASTM D3465-00(2007)e1 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D3465-14 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D3612-02(2009) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
ASTM D5504-08 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D7833-20 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
ASTM D6228-19 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
ASTM D3465-00 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D2504-88(1998) Standard Test Method for Noncondensable Gases in C₂ and Lighter Hydrocarbon Products by Gas Chromatography
ASTM D2504-88(2015) Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography

British Standards Institution (BSI), Gas phase solid

BS ISO 14456:2015 Gas cylinders. Gas properties and associated classification (FTSC) codes
BS EN ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation. Gas-phase air cleaning media
23/30445236 DC BS EN ISO 14456. Gas cylinders. Gas properties and associated classification (FTSC) codes
BS EN ISO 11114-1:2012+A1:2017 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
BS EN ISO 11114-1:2012 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
BS EN ISO 11114-1:2020+A1:2023 Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Metallic materials
BS EN ISO 11114-2:2013 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Non-metallic materials
BS EN ISO 20765-2:2018 Natural gas. Calculation of thermodynamic properties. Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application
BS EN ISO 9539:2010+A1:2013 Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes
BS ISO 20765-2:2015 Natural gas. Calculation of thermodynamic properties. Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application
BS EN ISO 9539:2010 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
23/30414224 DC BS ISO 14068. Greenhouse gas management and climate change management and related activities — Carbon neutrality
BS ISO 4126-10:2010 Safety devices for protection against excessive pressure. Sizing of safety valves for gas/liquid two-phase flow
BS EN ISO 11114-5:2022 Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Test methods for evaluating plastic liners
BS EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
17/30334569 DC BS ISO 14080. Greenhouse gas management and related activities. Framework and principles for methodologies on climate actions
DD ISO/TS 29041:2008 Gas mixtures. Gravimetric preparation. Mastering correlations in composition
BS EN ISO 13164-4:2020 Water quality. Radon-222. Test method using two-phase liquid scintillation counting
20/30410986 DC BS EN 17503. Environmental solid matrices. Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
BS EN ISO 10882-2:2000 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Sampling of gases
BS ISO 16362:2005 Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
BS ISO 11338-1:2003 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Sampling
22/30454754 DC BS EN ISO 11114-1:2020 AMD1. Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Part 1. Metallic materials
BS EN ISO 12228-1:2014 Determination of individual and total sterols contents. Gas chromatographic method. Animal and vegetable fats and oils
23/30471670 DC BS EN ISO 10882-2. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone - Part 2. Sampling of gases
BS EN ISO 9692-3:2001 Welding and allied processes. Joint preparation. Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
BS 8487:2007+A1:2013 The design and construction of gas boosters used in association with combustion equipment - Specification
BS EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
BS EN 61619:1997 Insulation liquids. Contamination by polychlorinated biphenyls (PCBs). Method of determination by capillary column gas chromatography
22/30440232 DC BS EN 12177. Liquid petroleum products. Unleaded petrol. Determination of benzene content by gas chromatography

国家市场监督管理总局、中国国家标准化管理委员会, Gas phase solid

GB/T 37182-2018 Gas analysis—Gas chromatograph with plasma emission detector
GB/T 36646-2018 Equipment for preparation of nitride semiconductor materials by hydride vapor phase epitaxy

ES-UNE, Gas phase solid

ISO/DIS 14456:2023 Gas cylinders — Gas properties and associated classification (FTSC) codes
UNE-EN ISO 14456:2017/A1:2020 Gas cylinders - Gas properties and associated classification (FTSC) codes - Amendment 1 (ISO 14456:2015/Amd 1:2019)
UNE-ISO 14080:2019 Greenhouse gas management and related activities. Framework and principles for methodologies on climate actions
UNE-EN ISO 20765-2:2019 Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application (ISO 20765-2:2015)
UNE-EN 12177:2023 Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography
UNE-EN 61619:2004 ERRATUM Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography

Korean Agency for Technology and Standards (KATS), Gas phase solid

KS B ISO 21010:2006 Cryogenic vessels－Gas/materials compatibility
KS B ISO 21010:2018 Cryogenic vessels－Gas/materials compatibility
KS B ISO 21010-2023 Cryogenic Vessel Gas/Material Compatibility
KS B ISO 14175:2008 Welding consumables－Shielding gases for arc welding and cutting
KS C IEC 60512:2009 Identification by hour numbers of the phase conductors of 3-phase electric systems
KS I ISO 12884-2008(2018) Ambient air-Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons — Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
KS M 2085-1-2005 Liquid petroleum products-Determination of hydrocarbon types-Gas chromatography
KS B ISO 11114-1:2007 Transportable gas cylinders-Compatibility of cylinder and valve materials with gas contents-Part 1:Metallic materials
KS B ISO 11114-1:2016 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
KS B ISO 11114-1-2023 Gas cylinders Compatibility of cylinder and cylinder valve materials with the gas they contain Part 1: Metallic materials
KS I ISO 14080:2019 Greenhouse gas management and related activities — Framework and principles for methodologies on climate actions
KS B ISO 11114-2:2015 Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials
KS I ISO TS 29041-2016(2021) Gas mixtures－Gravimetric preparation－Mastering correlations in composition
KS I ISO/TS 29041:2010 Gas mixtures-Gravimetric preparation-Mastering correlations in composition
KS I ISO/TS 29041:2016 Gas mixtures-Gravimetric preparation-Mastering correlations in composition
KS B ISO 11114-2:2007 Transportable gas cylinders-Compatibility of cylinder and valve materials with gas contents-Part 2:Non-metallic materials
KS I ISO TS 29041:2016 Gas mixtures－Gravimetric preparation－Mastering correlations in composition
KS B ISO 11114-3:2012 Transportable gas cylinders-Compatibility of cylinder and valve materials with gas contents-Part 3:Autogenous ignition test in oxygen atmosphere
KS B ISO 11114-3-2016(2021) Transportable gas cylinders－Compatibility of cylinder and valve materials with gas contents－Part 3：Autogenous ignition test in oxygen atmosphere
KS B ISO 11114-3:2016 Transportable gas cylinders－Compatibility of cylinder and valve materials with gas contents－Part 3：Autogenous ignition test in oxygen atmosphere
KS C IEC 62311:2014 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields(0 Hz∼300 GHz)
KS B 6354-2016(2021) LP－GAS pressure regulators used in cutting,heating and related processes
KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography
KS C IEC 61619:2006 Contamination by polychlorinated biphenyls(PCBs)-Method of determination by capillary column gas chromatography

AENOR, Gas phase solid

UNE-EN 1797:2002 Cryogenic vessels- Gas/material compatibility.
UNE-EN ISO 14456:2017 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015)
UNE-EN ISO 14175:2009 Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
UNE-ISO/TS 29041:2010 EX Gas mixtures - Gravimetric preparation - Mastering correlations in composition.
UNE-EN ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2012)
UNE-EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013)
UNE-EN 16423:2014 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
UNE-EN ISO 11114-3:2011 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
UNE-EN ISO 10882-2:2001 Health and safety in welding and allied processes. Sampling of airbone particles and gases in the operator's breathing zone. Part 2: Samplling of gases. (ISO 10882-2:2000).
UNE-EN 61619:1998 INSULATING LIQUIDS. CONTAMINATION BY POLYCHLORINATED BIPHENYLS (PCBS). METHOD OF DETERMINATION BY CAPILLARY COLUMN GAS CHROMATOGRAPHY.
UNE-EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method

KR-KS, Gas phase solid

KS B ISO 21010-2018 Cryogenic vessels－Gas/materials compatibility
KS C IEC 60512-2009 Identification by hour numbers of the phase conductors of 3-phase electric systems
KS I ISO TS 29041-2016 Gas mixtures－Gravimetric preparation－Mastering correlations in composition
KS I ISO 14080-2019 Greenhouse gas management and related activities — Framework and principles for methodologies on climate actions
KS B ISO 11114-3-2016 Transportable gas cylinders－Compatibility of cylinder and valve materials with gas contents－Part 3：Autogenous ignition test in oxygen atmosphere

PH-BPS, Gas phase solid

PNS ISO 14175:2021 Welding consumables - Gases and gas mixtures for fusion welding and allied processes
PNS ISO 14097:2021 Greenhouse gas management and related activities - Framework including principles and requirements for assessing and reporting investments and financing activities related to climate change

GOSTR, Gas phase solid

GOST R ISO 14175-2010 Welding consumables. Gases and gas mixtures for fusion welding and allied processes
GOST ISO 11114-1-2017 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 1. Metallic materials

Natural Gas Processor's Association (NGPA), Gas phase solid

GPA STD 2261-2013 Analysis for Natural Gas and Similar Gaseous Mixtures by Gas Chromatography
GPA RR-148-1995 Volume Correction Factors for Natural Gas Liquids Phase II
GPA RR-70-1983 Phase Equilibrium Studies for Processing of Gas from CO2 EOR Projects
GPA STD 2261-2000 Analysis for Natural Gas and Similar Gaseous Mixtures by Gas Chromatography
GPA STD 2177-2013 Analysis of Natural Gas Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
GPA RR-54-1981 Equilibrium Phase Behavior of Several Solute Gases in the Solvent Phenanthrene
GPA STD 2286-2014 Method for the Extended Analysis of Natural Gas and Similar Gaseous Mixtures by Temperature Program Gas Chromatography
GPA STD 2177-2003 Analysis of Natural Gas Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
GPA RR-76-1984 Phase Equilibrium Studies for Processing of Gas from CO2 EOR Projects (Phase II); Notice - 1984
GPA STD 2286-1995 Tentative Method of Extended Analysis for Natural Gas and Similar Gaseous Mixtures by Temperature Programmed Gas Chromatography

国家能源局, Gas phase solid

SY/T 7448-2019 Natural Gas Reference Material Stability Analysis Gas Chromatography

Danish Standards Foundation, Gas phase solid

DS/EN ISO 14175:2008 Welding consumables - Gases and gas mixtures for fusion welding and allied processes
DS/EN ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
DS/EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
DS/EN ISO 10882-2:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases
DS/EN 13787:2002 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
DS/EN ISO 7396-1/A3:2013 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Terminology relating to alarm systems
DS/EN ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method
DS/EN ISO 17652-4:2003 Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases
DS/CEN ISO/TS 15011-6/AC:2012 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding
DS/CEN ISO/TS 15011-6:2012 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding
DS/ISO 24293:2009 Water quality - Determination of individual isomers of nonylphenol - Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
DS/EN ISO 11114-3:2011 Gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
DS/EN 14667:2005 Surface active agents – Determination of low boiling solvents in liquid formulations – Gas chromatographic method

Standard Association of Australia （SAA）, Gas phase solid

AS/NZS ISO 14175:2022 Welding consumables — Gases and gas mixtures for fusion welding and allied processes
AS 4955.1:2003 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Metallic materials
AS/NZS 60079.20/AMD 1:2005 Amendment No.1 to AS/NZS 60079.20:2000 Electrical apparatus for explosive gas atmospheres Part 20: Data for flammable gases and vapours,relating to the use of electrical apparatus
AS 3853.2:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of gases

Professional Standard - Geology, Gas phase solid

DZ/T 0064.74-1993 Groundwater quality inspection method Gas chromatography determination of gas

Hebei Provincial Standard of the People's Republic of China, Gas phase solid

DB13/T 5222-2020 Determination of Purity of Nematic Thermotropic Liquid Crystal Monomer by Gas Chromatography
DB13/T 5097-2019 Gas Chromatography and Gas Chromatography-Mass Spectrometry Examination Method for 3-Fluoro-4-cyanophenol Ester Liquid Crystal Monomers

Professional Standard - Electron, Gas phase solid

SJ 3239-1989 General requirement for gas chromatography analysis method

Association of German Mechanical Engineers, Gas phase solid

DVS 0201-2002
VDI 2466 Blatt 1-2008 Gaseous emission measurement - Measurement of methane - Manual gas chromatography method
VDI 3493 Blatt 1-1982 Gaseous emission measurement; determination of vinyl chloride; gas chromatographic method; grab sampling
VDI 2457 Blatt 5-2000 Gaseous emission measurement - Chromatographic determination of organic compounds - Sampling in gas vessels, gas chromatographic analysis
VDI 3863 Blatt 1-1987 Measurement of gaseous emission; determination of acrylonitrile; gaschromatographic method; grab sampling
DVS 0205-1986
VDI 2457 Blatt 3-1996 Gaseous emission measurements - Gas chromatographic determination of organic compounds - Determination of substituted anilines - Sampling by solid phase adsorption
DVS 0801-1973 "Volume measurement of industrial gases for welding, cutting and allied working methods"
DVS 0801-2002 "Volume measurement of industrial gases for welding, cutting and allied working methods"
VDI 2469 Blatt 1-2005 Gaseous emission measurement - Measurenment of nitrous oxide - Manual gas chromatographic method
DVS 0201-1986
DVS 0213-1981 "Industrial gases for welding, cutting and allied working methods; helium"
VDI 3863 Blatt 2-1991 Gaseous emission measurement; determination of acrylonitrile; gas chromatographic method; sampling by absorption in low temperature solvents

European Committee for Standardization (CEN), Gas phase solid

prEN ISO 14456 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO/DIS 14456:2023)
EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
EN ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2012)
EN 16423:2012 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
EN 16423:2013 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
EN ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gasphase air cleaning media
EN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2021)
EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
prEN ISO 11114-6:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO/DIS 11114-6:2021)
EN ISO 6401:2022 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer using gas-chromatographic method (ISO 6401:2022)
EN ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008)
FprEN ISO 11114-2:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO/FDIS 11114-2:2021)
EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
EN 12177:1998/AC:2000 Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography; Amendment AC

Professional Standard - Electricity, Gas phase solid

DL/T 920-2005 Determination of air and carbon tetrafluoride content in sulphur hexafluoride by gas chromatography method
DL/T 2406-2021 Gas Chromatography Method for Detection of Dissolved Sulfur Hexafluoride Gas Content in Insulating Oil
DL/T 920-2019 Determination of air, carbon tetrafluoride, hexafluoroethane and octafluoropropane in sulfur hexafluoride gas by gas chromatography

IN-BIS, Gas phase solid

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Gas phase solid

ASHRAE SF-98-4-1-1998 Interaction of Air Motion with the Human Body (RP-978)

American Welding Society (AWS), Gas phase solid

AWS A5.32M/A5.32-2011 Welding Consumables-Gases and Gas Mixtures for Fusion Welding and Allied Processes (2nd Edition)
AWS A5.32M/A5.32-2021 Welding Consumables-Gases and Gas Mixtures for Fusion Welding and Allied Processes (3rd Edition)

American National Standards Institute （ANSI), Gas phase solid

ANSI/AWS A5.32M/A5.32:2021 Welding Consumables-Gases and Gas Mixtures for Fusion Welding and Allied Processes (3rd Edition)
ANSI/ASTM D3465:2000 Practice for Purity of Monomeric Plasticizers by Gas Chromatography
ANSI Z21.88a-2012 Standard for Vented Gas Fireplace Heaters (same as CSA 2.33)
CGA M-19-2023 Standard for Biocompatibility of Materials for Medical Gas Equipment - Second Edition
ANSI Z21.5.2-2013 Standard for Gas Clothes Dryers, Volume II, Type 2 Clothes Dryers (same as CSA 7.2b)
ANSI/AWS F1.1M:2018 Methods for Sampling Fumes and Gases Generated by Welding and Allied Processes (6th Edition)

Lithuanian Standards Office , Gas phase solid

LST EN ISO 14175:2008 Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
LST EN ISO 11114-1:2012 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2012)
LST EN 13787-2002 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
LST ISO 11338-1:2008 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling (ISO 11338-1:2003, identical)
LST EN ISO 10882-2:2002 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)
LST EN ISO 11114-3:2011 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
LST EN ISO 11114-2:2002 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000)
LST IEC 62089:2008 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters (IEC 62089:2001, identical)
LST EN 14667-2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method

Professional Standard - Meteorology, Gas phase solid

QX/T 273-2015 Monitoring method for atmospheric carbon monoxide concentration.Gas filter correlation

RU-GOST R, Gas phase solid

GOST R 57851.1-2017 Gas-condensate mixture. Part 1. Separation gas. Compositional analysis by gas chromatography method
GOST R 51330.19-1999 Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapours relating to the use of electrical apparatus
GOST 30852.19-2002 Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapours, relating to the use of electrical apparatus
GOST R 54282-2010 Gasoline. Determination of oxigenates by method of gas chromatography and oxygen selective flame ionization detection
GOST R 54282-2010(2019) Gasoline. Determination of oxigenates by method of gas chromatography and oxygen selective flame ionization detection
GOST R 56835-2015 Liquefied natural gas. Boil-off gas of liquefied natural gas production. Determination of composition by gas chromatography method
GOST R 56718-2015 Distillates and stable gas condensate. Determination of sulfur compounds by gas chromatography method
GOST R ISO 14080-2021 Greenhouse gas management and related activities. Framework and principles for methodologies on climate actions
GOST 33833-2016 Spirits. Gas-chromatographic method for determination of volume fraction of methanol
GOST 24614-1981 Liquids and gases not reacting with the Karl Fischer reagent. Coulonometric method of water determination
GOST 31596-2012 Gas tightness of equipment and apparatus for gas welding, cutting and allied processes. Permissible rates of external gas leakage and measuring procedures
GOST R ISO 12884-2007 Ambient air. Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
GOST R 50402-2011 Equipment used in gas welding, cutting and allied processes. Safety devices for fuel gases and oxygen or compressed air. Technical requirements and tests
GOST R 50402-1992 Safety devices for fuel gases and oxigen or compressed air for gas welding, cutting and allied processes. Definitions, general requirements and testing methods
GOST R 56720-2015 Petroleum products and stable gas condensate. Determination of boiling range distribution by gas chromatography method
GOST R EN 12177-2008 Liquid petroleum products. Petroleum. Determination of benzene content by method of gas chromatography

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gas phase solid

GB/T 35530-2017 Gas mixtures—Gravimetric preparation—Mastering correlations in composition
GB/T 17623-2017 Determination of componental contents of gases dissolved in insulating oil by gas chromatography method
GB/T 33318-2016 Gas analysis—Determination of sulfide—Gas chromatography with sulfur chemiluminescence
GB/T 34715-2017 Thermoplastic elastomer—Determination of phthalates—Gas chromatography-mass spectrometry

API - American Petroleum Institute, Gas phase solid

API MPMS 14.2-1994 Compressibility Factors of Natural Gas and Other Related Hydrocarbon Gases (Second Edition)
API PUBL 4683-1998 Correlation Equations to Predict Reid Vapor Pressure and Properties of Gaseous Emissions for Exploration and Production Facilities

Henan Provincial Standard of the People's Republic of China, Gas phase solid

DB41/T 1888-2019 Specification for supervision and inspection of installation of organic heat carrier gas phase furnace

Universal Oil Products Company (UOP), Gas phase solid

UOP 948-2007 RELATIVE DENSITY OF GAS MIXTURES BY CALCULATION FROM COMPOSITION

PL-PKN, Gas phase solid

PN Z04173-02-1989 Airpurity protection ests tor dowtherms etermination ot dowtherm A in tht aste gas discharging to atmospheric ir (emission) by gas hromatography
PN-EN ISO 11114-1-2020-11 E Gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 1: Metallic materials (ISO 11114-1:2020)
PN Z04227-02-1992 Air purity protection ests for kerosene content etermination of kerosene vapours n work places by gas chromatography
PN C05061-1986 Rubbers, latices synthetic Determination the free monomers content by the gas chromatographic method
PN C89414-1989 Plastics Determination of residual methyl methacrylate monomer by gas chromatographic method
PN C04757-1985 Gaseous fuels Calculation of gross and net calorific value, density, relative density and Wobbe index from gas composition

Professional Standard - Environmental Protection, Gas phase solid

HJ 583-2010 Ambient air.Determination of benzene and its analogies using sorbent adsorption thermal desorption and gas chromatography
HJ 711-2014 Solid waste.Determination of phenolic compounds.Gas chromatography
HJ 975-2018 Solid waste-Determination of benzene and its analogies-Headspace-gas chromatography
HJ 768-2015 Determination of Organophosphorus Pesticides in Solid Waste by Gas Chromatography
HJ 891-2017 Determination of Polychlorinated Biphenyls in Solid Waste by Gas Chromatography-Mass Spectrometry
HJ 950-2018 Determination of Polycyclic Aromatic Hydrocarbons in Solid Waste by Gas Chromatography-Mass Spectrometry
HJ 912-2017 Determination of Organochlorine Pesticides in Solid Waste by Gas Chromatography-Mass Spectrometry
HJ 976-2018 Determination of Benzene Series in Solid Waste by Headspace Gas Chromatography-Mass Spectrometry
HJ 760-2015 Solid waste—Determination of volatile organic compounds — Headspace-gas chromatography method
HJ 951-2018 Determination of semi-volatile organic compounds in solid waste by gas chromatography-mass spectrometry
HJ 643-2013 Solid waste -Determination of volatile organic compounds- Headspace-gas chromatography/mass method
HJ 714-2014 Solid wastes-Determination of volatile halohydrocarbons -Headspace gas chromatography mass method
HJ 874-2017 Solid waste-Determination of acrolein, acrylonitrile and acetonitrile-Headspace gas chromatography method

Fujian Provincial Standard of the People's Republic of China, Gas phase solid

DB35/T 1248-2012 Determination of impurity content in germane gas for electronics industry - Gas chromatography
DB35/T 1657-2017 Determination of Eugenol in Aquaculture Water by Gas Chromatography-Mass Spectrometry

中华人民共和国环境保护部, Gas phase solid

(HJ 711-2014) Solid waste —Determination of phenolic compounds —Gas chromatography

American Gas Association, Gas phase solid

AGA REPORT 10-2003 Speed of Sound in Natural Gas and Other Related Hydrocarbon Gases (XQ0310)

Malaysia Standards, Gas phase solid

MS 1013-1986

AWS - American Welding Society, Gas phase solid

F1.5-1996 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
F1.5M-2003 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
F1.5-1987 Methods for Sampling and Analyzing Gases from Welding and Allied Processes
F1.1M-2018 Methods for Sampling Fumes and Gases Generated by Welding and Allied Processes (6th Edition)

Professional Standard - Machinery, Gas phase solid

JB/T 14414-2023 Internal combustion engines — Isothermal quenched bainite cylinder liners — Metallographic inspection
JB/T 12329-2015 Internal combustion engines.As-cast bainitic gray cast iron cylinder liners.Metallographic inspections
JB/T 8554-1997 Scratch test method for adhesion between vapor plating film and the base

Taiwan Provincial Standard of the People's Republic of China, Gas phase solid

CNS 14665-2002 Method of test for determination of sulfur compounds in natural gas and gaseous fluels by gas chromatograph and Chemiluminescence
CNS 14765-2003 Standard practice for calculating heat value, compressibility factor, and relative density of gaseous fuels

Professional Standard - Public Safety Standards, Gas phase solid

GA/T 1321-2016 GC and GC-MS examination methods for penthidine and its metabolite in biological fluid in forensic science

ESDU - Engineering Sciences Data Unit, Gas phase solid

ESDU 76018 D-2007 The frictional component of pressure gradient for two-phase gas or vapour/liquid flow through straight pipes.
ESDU 77016 A-1978 THE GRAVITATIONAL COMPONENT OF PRESSURE GRADIENT FOR TWO-PHASE GAS OR VAPOUR/LIQUID FLOW THROUGH STRAIGHT PIPES
ESDU 77016 B-2007 The gravitational component of pressure gradient for two-phase gas or vapour/liquid flow through straight pipes.

BE-NBN, Gas phase solid

NBN-ISO 5784-2:1990 Fluid power systems and components - Fluid logic circuits - Symbols for supply and exhausts as related to logic symbols
NBN 862-1971
NBN F 41-001-1986
NBN-HD 602-1994 Test on gases evolved during the combustion of materials from cables. Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity

国家质量监督检验检疫总局, Gas phase solid

SN/T 4332-2015 Method for determination of phosphine fumigation gas residues in fresh fruits by gas chromatography

VN-TCVN, Gas phase solid

TCVN 6874-1-2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1:Metallic materials
TCVN 6874-3-2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents .Part 3:Autogenous ignition test for non-metallic materials in oxygen atmosphere

PT-IPQ, Gas phase solid

NP 1318-1976

ZA-SANS, Gas phase solid

SANS 12170:2004 Gas welding equipment - Thermoplastic hoses for welding and allied processes
SANS 3253:2004 Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
SANS 1156-2:2007 Hose for liquefied petroleum gas (LPG) Part 2: Hose and tubing for use in LPG vapour phase and LPG-air installations

Guangxi Provincial Standard of the People's Republic of China, Gas phase solid

DB45/T 1453-2016 Determination of Oleic Acid Content in Leech Broadbodied by Gas Chromatography

AT-ON, Gas phase solid

ONORM M 7870-1982 Hoses without protective cover, for acetylene, for oxygene and other not combustible gases, for gas welding, cutting and allied processes.
OENORM EN ISO 11114-6:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO/DIS 11114-6:2021)

International Electrotechnical Commission (IEC), Gas phase solid

IEC TS 61081:1991 Pneumatic instruments driven by associated process gas - Safe installation and operating procedures - Guidelines

Society of Automotive Engineers (SAE), Gas phase solid

SAE ARP4755A-2003 Turboshaft/Turboprop Gas Turbine Engine Test Cell Correlation
SAE ARP6179-2022 Evaluation of Gas Turbine Engine Lubricant Compatibility with Elastomer O-Rings

Professional Standard - Chemical Industry, Gas phase solid

HG/T 3501-2011 Chemical reagent.Determination of the effective plate number of solid support in a gas chromatography
HG/T 3501-1982 Determination of effective plate number of carriers used in chemical reagent gas chromatography
HG/T 2686-1995 Determination of Trace Hydrogen, Oxygen, Methane, Carbon Monoxide in Inert Gases Gas Chromatography with Zirconia Detector

SAE - SAE International, Gas phase solid

SAE ARP4755C-2016 Turboshaft/Turboprop Gas Turbine Engine Test Cell Correlation
SAE ARP6179-2011 Evaluation of Gas Turbine Engine Lubricant Compatibility with Elastomer O-Rings

Professional Standard - Energy, Gas phase solid

NB/SH/T 0919-2015 Standard test method for determination of sulfur compounds in gaseous fuels and natural gas by gas chromatography and chemiluminescence

CH-SNV, Gas phase solid

SN EN ISO 11114-1:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)

Professional Standard - Building Materials, Gas phase solid

JC/T 2243-2014 Quartz tube covered in a film for PECVD

Professional Standard - Petrochemical Industry, Gas phase solid

SH/T 0714-2002 Standard test method for detailed analysis of petroleum naphthas through n-nonane by capillary gas chromatography

未注明发布机构, Gas phase solid

DIN EN 116:2015 Gaseous and liquid fuels, lubricants and related products of mineral oil, synthetic or biological origin
BS 6942-2:1989(2000) Design and construction of small kits for oxy - fuel gas welding and allied processes — Part 2 : Specification for kits using refillable gas containers for oxygen and fuel gas

AASHTO - American Association of State Highway and Transportation Officials, Gas phase solid

M132-1987 Standard Specification for Terms Relating to Density and Specific Gravity of Solids@ Liquids@ and Gases (Twentieth Edition; ASTM E12-70 (1991)E1)

Agricultural Standard of the People's Republic of China, Gas phase solid

农业部1063号公告-7-2008 Simultaneous determination of 8 kinds of β-adrenergic agonists in feedstuffs Gas chromatography-mass spectrometry
农业部1031号公告-3-2008 Determination of β.agonist residues in swine liver and urine Gas chromatography-mass spectrometry method

Jiangsu Provincial Standard of the People's Republic of China, Gas phase solid

DB32/T 2958-2016 Determination of Phthalates in Aquaculture Water by Gas Chromatography-Mass Spectrometry

Professional Standard - Agriculture, Gas phase solid

SC/T 9444-2023 Determination of ammonia nitrogen in aquaculture water by gas phase molecular absorption spectrometry

RO-ASRO, Gas phase solid

STAS 12909-1990 Gas welding and cutting equipments and allied processes. Quick-action couplings with smut-off valve for for gases. General technical requirements for quality

ES-AENOR, Gas phase solid

UNE 60-774-1990

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Gas phase solid

IPC TM-650 2.5.5.13-2007 Relative Permittivity and Loss Tangent Using a Split-Cylinder Resonator

Professional Standard - Commodity Inspection, Gas phase solid

SN/T 3342-2012 Determination of residual monomers in acrylic resin.Gas chromatography-mass spectrometry

Japanese Industrial Standards Committee (JISC), Gas phase solid

JIS K 6869:1999 Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography

Professional Standard - Customs, Gas phase solid

HS/T 26-2009 Quantitive analysis for isomer of toluene diisocyanate.gas-chromatography

Hubei Provincial Standard of the People's Republic of China, Gas phase solid

DB42/T 1773-2021 Determination of Chlorobenzenes in Soil Pressurized Fluid Extraction - Gas Chromatography

海关总署, Gas phase solid

HS/T 26-2017 Determination of isomer content in toluene diisocyanate by gas chromatography