ZH

RU

ES

Structural Analysis Methods of Matter

Structural Analysis Methods of Matter, Total:495 items.

In the international standard classification, Structural Analysis Methods of Matter involves: Products of the textile industry, Optical equipment, Wood-based panels, Metalliferous minerals, Information technology (IT) in general, Analytical chemistry, Food products in general, Test conditions and procedures in general, Protection against fire, General methods of tests and analysis for food products, Geology. Meteorology. Hydrology, Sugar. Sugar products. Starch, Thermodynamics and temperature measurements, Coals, Kitchen equipment, Corrosion of metals, Water quality, Cases. Boxes. Crates, Fuels, Natural gas, Education, Buildings, Farming and forestry, Petroleum products in general, Non-ferrous metals, Radiation measurements, Plastics, Structures of buildings, Extraction and processing of petroleum and natural gas, Construction materials, Milk and milk products, Cutting tools, Textile fibres, Metrology and measurement in general, Ceramics, Burners. Boilers, Pulps, Adhesives, Products of the chemical industry, Protection of and in buildings, Microbiology, Leather technology, Construction industry, Soil quality. Pedology, Refractories, Iron and steel products, Nuclear energy engineering, Elements of buildings, Reinforced plastics, Products of non-ferrous metals, Air quality, Shipbuilding and marine structures in general, Wood, sawlogs and sawn timber, Ferrous metals, Quality, Beverages, Welding, brazing and soldering, Tea. Coffee. Cocoa, Semiconducting materials, Cereals, pulses and derived products, Powder metallurgy, Electronic component assemblies.


Professional Standard - Textile, Structural Analysis Methods of Matter

  • FZ/T 01094-2008 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of the mass of warp and weft per unit area of fabric
  • FZ/T 01094-1999 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of the mass of warp and weft per unit area of fabric
  • FZ/T 01091-2008 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of crimp of yarn in fabric
  • FZ/T 01091-1999 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of crimp or take-up of yarn in fabric
  • FZ/T 01092-2008 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of twist in yarn removed from fabric
  • FZ/T 01092-1999 Textiles.Woven fabrics.Construction.Method of analysis.Determination of twist in yarn removed from fabric
  • FZ/T 01093-2008 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of linear density of yarn removed from fabric
  • FZ/T 01093-1999 Textiles.Woven fabrics.Construction.Methods of analysis.Determination of linear density of yarn removed from fabric
  • FZ/T 01090-2008 Textiles.Woven fabrics.Construction.Methods of analysis.Methods for the presentation of a weave diagram and plans for drafting,denting and lifting
  • FZ/T 01090-1999 Textiles.Woven fabrics.Construction.Methods of analysis.Methods for the presentation of a weave diagram and plans for drafting,denting and lifting

Association Francaise de Normalisation, Structural Analysis Methods of Matter

  • NF ISO 7211-5:2020 Textiles - Méthodes d'analyse de la construction des tissus - Partie 5 : détermination de la masse linéique d'un fil prélevé dans un tissu
  • NF G07-157:1984 Textiles. Woven fabrics. Construction. Methods of analysis. Determination of the mass of warp and weft per unit area of fabric.
  • NF ISO 7211-6:2020 Textiles - Méthodes d'analyse de la construction des tissus - Partie 6 : détermination de la masse des fils de chaîne et de trame par unité de surface d'un tissu
  • NF ISO 7211-3:2017 Textiles - Tissus - Construction - Méthodes d'analyse - Partie 3 : détermination de l'embuvage d'un fil dans un tissu
  • NF G07-154-6*NF ISO 7211-6:2020 Textiles - Methods for analysis of woven fabrics construction - Part 6 : determination of the mass of wrap and weft per unit area of fabric
  • NF G07-154-3*NF ISO 7211-3:2017 Textiles- Woven fabrics- Construction- Methods of analysis- Part 3 : determination of crimp of yarn in fabric
  • NF EN 1049-2:1994 Textiles - Tissus - Construction - Méthodes d'analyse - Partie 2 : détermination du nombre de fils par unité de longueur.
  • NF G07-154:1984 Textiles. Woven fabrics. Construction. Methods of analysis. Methods for the presentation of a weave diagram and plans for drafting, denting and lifting.
  • NF X31-506:1992 Soil quality - Physical methods - Assessment of the structural stability of a soil
  • NF G07-155*NF EN 1049-2:1994 Textiles. Woven fabrics. Construction. Methods of analysis. Part 2 : determination of number of threads per unit length.
  • NF V03-021:2013 Foodstuffs - Molecular biomarker analysis - Protein-based methods
  • NF G07-154-1*NF ISO 7211-1:2017 Textiles- Woven fabrics- Construction- Methods of analysis - Part 1 : methods for the presentation of a weave diagram and plans for drafting, denting and lifting
  • NF ISO 7211-1:2017 Textiles - Tissus - Construction - Méthodes d'analyse - Partie 1 : représentation du dessin d'armure, du rentrage, du piquage au peigne et du levage
  • NF EN ISO 21253-2:2019 Qualité de l'eau - Méthodes d'analyse de composés multi-classes - Partie 2 : critères pour la détermination quantitative de composés organiques avec une méthode d'analyse de composés multi-classes
  • FD ISO/TR 17622:2015 Analyse moléculaire de biomarqueurs - Méthode d'analyse SSR sur le tournesol
  • NF EN 12810-2:2004 Échafaudages de façade à composants préfabriqués - Partie 2 : méthodes particulières de calcul des structures
  • XP ISO/TS 21569-3:2020 Méthodes horizontales d'analyse moléculaire de biomarqueurs - Méthodes d'analyse pour la détection des organismes génétiquement modifiés et des produits dérivés - Partie 3 : méthode PCR en temps réel construit-spécifique pour la détectio...
  • NF T25-111-3:1991 Carbon fibres- Texture and structure- Part 3: Azimutal analysis of the diffraction of the X-rays
  • XP X31-131:2020 Test methods for the environmental characterization of solid matrices - Characterization of analytical methods - Guide for the validation of physico-chemical analytical methods in soil, sediment and sludge matrices and for the selection of test samples
  • NF T90-253-2*NF EN ISO 21253-2:2019 Water quality - Multi-compound class methods - Part 2 : criteria for the quantitative determination of organic substances using a multi-compound class analytical method
  • NF X21-066*NF ISO 23812:2009 Surface chemical analysis - Secondary ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
  • NF A95-186-3*NF EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3 : measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
  • NF G07-154-5:2020 Textiles - Methods for analysis of woven fabrics construction - Part 5 : determination of linear density of yarn removed from fabric
  • FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
  • NF P21-377:1999 Timber structures - Test methods - Withdrawal capacity of timber fasteners.
  • XP ISO/TS 21569-4:2017 Méthodes horizontales d'analyse moléculaire de biomarqueurs - Méthodes d'analyse pour la détection des organismes génétiquement modifiés et des produits dérivés - Partie 4 : méthodes de criblage par PCR en temps réel pour la détection des...
  • NF X21-062*NF ISO 14606:2008 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
  • NF T34-553:1995 Paints and varnishes. Corrosion protection of steel structures by protective paints systems. Methods of analysis.
  • NF T75-612*NF ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
  • NF ISO 12787:2012 Cosmétiques - Méthodes analytiques - Critères de validation pour les résultats analytiques utilisant des techniques chromatographiques
  • NF G06-033:1977 Textiles. Methods for the removal of non-fibrous matter prior to quantitative analysis of fibre mixtures.
  • NF EN ISO 20813:2022 Analyse moléculaire de biomarqueurs - Méthodes d'analyse pour la détection et l'identification des espèces animales dans les aliments et les produits alimentaires (méthodes basées sur l'utilisation des acides nucléiques) - Exigences général...
  • NF ISO 22949-1:2021 Analyse moléculaire de biomarqueurs - Méthodes d'analyse pour la détection et l'identification d'espèces animales dans les aliments et les produits alimentaires (méthodes basées sur le séquençage des nucléotides) - Partie 1 : exigences gén...
  • XP CEN ISO/TS 29843-1:2014 Qualité du sol - Détermination de la diversité microbienne du sol - Partie 1 : méthode par analyse des acides gras phospholipidiques (PLFA) et par analyse des lipides éther phospholipidiques (PLEL)
  • NF EN 12698-1:2008 Analyse chimique des produits réfractaires contenant du carbure de silicium lié au nitrure - Partie 1 : méthodes chimiques
  • NF EN 12698-2:2008 Analyse chimique des produits réfractaires contenant du carbure de silicium lié au nitrure - Partie 2 : méthodes de DRX
  • NF C93-732:2000 Test methods for electrical materials, interconnection structures and assemblies - Part 2 : Test method for materials for interconnection structures.
  • XP T90-210-1999 Water quality - Protocol for the evaluation of an alternative quantitative physico-chemical analysis method against a reference method.

VN-TCVN, Structural Analysis Methods of Matter

  • TCVN 5096-1990 Textiles.Woven fabrics construction.Method of analysis determination of the mass of warp and weft per unit area of fabrics
  • TCVN 5093-1990 Textiles.Woven fabrics construction.Methods of analysis determination of crimp of yarn in fabrics
  • TCVN 5094-1990 Textiles.Woven fabrics construction.Methods of analysis determination of twist in yarn removed from fabrics
  • TCVN 5095-1990 Textiles.Woven fabrics construction.Method of analysis determination of linear density of yarn removed from fabrics
  • TCVN 5464-1991 Textiles.Method for the removal of non-fibrous matter prior to quantitative analysis of fibre mixtures
  • TCVN 7607-2007 Foodstuffs.Methods of analysis for the detection of genetically modified organisms and derived products.Protein based methods

Korean Agency for Technology and Standards (KATS), Structural Analysis Methods of Matter

  • KS K ISO 7211-6:2012 Textiles-Woven fabrics-Construction-Methods of analysis-Part 6:Determination of the mass of warp and weft per unit area of fabric
  • KS K ISO 7211-3:2015 Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric
  • KS K ISO 7211-3:2008 Testiles-Woven fabrics-Construction-Methods of analysis-Part 3:Determination of crimp of yarn in fabric
  • KS K ISO 7211-3:2021 Textiles — Woven fabrics — Construction — Methods of analysis —Part 3: Determination of crimp of yarn in fabric
  • KS K ISO 7211-4:2021 Textiles — Woven fabrics — Construction — Methods of analysis — Part 4: Determination of twist in yarn removed from fabric
  • KS K ISO 7211-2:2017 Textiles-Woven fabrics-Construction-Methods of analysis-Part 2:Determination of number of threads per unit length
  • KS K ISO 7211-2:2022 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
  • KS K ISO 7211-1:2018 Textiles — Woven fabrics — Construction — Methods of analysis — Part 1: Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
  • KS K ISO 7211-1:2009 Textiles-Woven fabrics-Construction-Methods of analysis-Part 1:Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
  • KS K 0415-2022 Textiles — Methods for analysis of woven fabrics construction — Part 5: Determination of linear density of yarn removed from fabric
  • KS I 3224-2009 Test method for ordorous compounds in water
  • KS K ISO 7211-2:2011 Textiles-Woven fabrics-Construction-Methods of analysis-Part 2:Determination of number of threads per unit length
  • KS I ISO 24094:2010 Analysis of natural gas-Validation methods for gaseous reference materials
  • KS I ISO 24094-2010(2021) Analysis of natural gas-Validation methods for gaseous reference materials
  • KS I ISO 24094-2010(2016) Analysis of natural gas-Validation methods for gaseous reference materials
  • KS I ISO 18749-2010(2015) Water quality-Adsorption of substances on activated sludge-Batch test using specific analytical methods
  • KS F 2462-2021 Standard test method for density of structural light weight concrete
  • KS K 0251-2016 Test method for the removal of non-fibrous matter prior to quantitative analysis of fibre mixtures
  • KS K 0251-2016(2021) Test method for the removal of non-fibrous matter prior to quantitative analysis of fibre mixtures
  • KS K ISO TR 5090:2007 Textiles-Methods for the removal of non-fibrous matter prior to quantitative analysis of fibre mixtures
  • KS I ISO 18749:2010 Water quality-Adsorption of substances on activated sludge-Batch test using specific analytical methods
  • KS I ISO 18749:2022 Water quality ― Adsorption of substances on activated sludge ―Batch test using specific analytical methods
  • KS I ISO 7704:2008 Water quality-Evaluation of membrane filters used for microbiological analyses
  • KS I ISO 16265:2011 Water quality-Determination of the methylene blue active substances(MBAS) index-Method using continuous flow analysis(CFA)
  • KS I 2204-2011 Methods for determination of sulfur oxides in flue gas
  • KS F 2462-2016 Standard test method for unit weight of structural light weight concrete
  • KS F 2613-2020 Standard test methods for non-bearing lightweight wall for building construction
  • KS I 2203-2011 Methods for determination of oxides of nitrogen in flue gases
  • KS M 2099-2005(2010) Methods for determination of fluorine compounds in exhaust gas

International Organization for Standardization (ISO), Structural Analysis Methods of Matter

  • ISO 7211-6:2020 Textiles — Methods for analysis of woven fabrics construction — Part 6: Determination of the mass of warp and weft per unit area of fabric
  • ISO 29301:2017 Microbeam analysis - Analytical electron microscopy - Methods for calibrating image magnification by using reference materials with periodic structures
  • ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
  • ISO 7211-6:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 6 : Determination of the mass of warp and weft per unit area of fabric
  • ISO 7211-3:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 3 : Determination of crimp of yarn in fabric
  • ISO 7211-5:2020 Textiles — Methods for analysis of woven fabrics construction — Part 5: Determination of linear density of yarn removed from fabric
  • ISO 7211-4:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 4 : Determination of twist in yarn removed from fabric
  • ISO 7211-5:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 5 : Determination of linear density of yarn removed from fabric
  • ISO 7211-1:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 1 : Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
  • ISO 7211-2:1984 Textiles; Woven fabrics; Construction; Methods of analysis; Part 2 : Determination of number of threads per unit length
  • ISO/AWI 7211-2:2023 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
  • ISO/TR 24094:2006 Analysis of natural gas - Validation methods for gaseous reference materials
  • ISO 21253-2:2019 Water quality — Multi-compound class methods — Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method
  • ISO 7404-4:2017 Methods for the petrographic analysis of coals — Part 4: Method of determining microlithotype, carbominerite and minerite composition
  • ISO 7404-3:2009 Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition
  • ISO 21572:2019 Foodstuffs — Molecular biomarker analysis — Immunochemical methods for the detection and quantification of proteins
  • ISO 13910:2014 Timber structures - Strength graded timber - Test methods for structural properties
  • ISO 7404-3:1984 Methods for the petrographic analysis of bituminous coal and anthracite; Part 3 : Method of determining maceral group composition
  • ISO/CD 16094-3 Water quality — Analysis of plastics in water — Part 3: Thermo-analytical methods for waters with low content of natural suspended solids
  • ISO 18749:2004 Water quality - Adsorption of substances on activated sludge - Batch test using specific analytical methods
  • ISO 7704:1985 Water quality; Evaluation of membrane filters used for microbiological analyses
  • ISO 7704:2023 Water quality — Requirements for the performance testing of membrane filters used for direct enumeration of microorganisms by culture methods
  • ISO 16265:2009 Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA)
  • ISO/TS 21569-7:2022 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 7: Real-time PCR based methods for the detecti
  • ISO/CD TS 21569-9 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 9: Construct-specific real-time PCR based screening method for the detection of the P-35S-nptII DNA-s
  • ISO 22753:2021 Molecular biomarker analysis — Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains — General requirements
  • ISO/TS 21569-3:2015 Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 3: Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetical
  • ISO/TS 21569-3:2020 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 3: Construct-specific real-time PCR method for
  • ISO 7404-3:1994 Methods for the petrographic analysis of bituminous coal and anthracite - Part 3: Method of determining maceral group composition
  • ISO 22157:2019 Bamboo structures — Determination of physical and mechanical properties of bamboo culms — Test methods
  • ISO 14606:2000 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
  • ISO 14606:2015 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
  • ISO 12787:2011 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
  • ISO/FDIS 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
  • ISO 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures

国家市场监督管理总局、中国国家标准化管理委员会, Structural Analysis Methods of Matter

  • GB/T 38359-2019 Data-analysis methods of strength properties for structural wood and wood-based products
  • GB/T 38902-2020 Determination of hollow fiber membrane cross-section dimensions—Image analysis method

ESDU - Engineering Sciences Data Unit, Structural Analysis Methods of Matter

  • ESDU 97033-1997 Methods for analysis of the dynamic response of structures.
  • ESDU 91013 A-2011 Methods for improving damping Part 2: layered damping treatment for structures: analysis and examples
  • ESDU 91013 A-1994 Methods for improving damping. Part 2: layered damping treatment for structures: analysis and examples.

KR-KS, Structural Analysis Methods of Matter

  • KS K ISO 7211-3-2015 Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric
  • KS K ISO 7211-3-2021 Textiles — Woven fabrics — Construction — Methods of analysis —Part 3: Determination of crimp of yarn in fabric
  • KS K ISO 7211-4-2021 Textiles — Woven fabrics — Construction — Methods of analysis — Part 4: Determination of twist in yarn removed from fabric
  • KS K ISO 7211-2-2022 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
  • KS K ISO 7211-2-2017 Textiles-Woven fabrics-Construction-Methods of analysis-Part 2:Determination of number of threads per unit length
  • KS K ISO 7211-1-2018 Textiles — Woven fabrics — Construction — Methods of analysis — Part 1: Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
  • KS K ISO 7211-1-2018(2023) Textiles — Woven fabrics — Construction — Methods of analysis — Part 1: Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
  • KS K ISO TR 5090-2007 Textiles-Methods for the removal of non-fibrous matter prior to quantitative analysis of fibre mixtures
  • KS I ISO 18749-2022 Water quality ― Adsorption of substances on activated sludge ―Batch test using specific analytical methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Structural Analysis Methods of Matter

  • GB/T 29256.6-2012 Textiles.Woven fabrics.Construction.Methods of analysis.Part 6:Determination of the mass of warp and weft per unit area of fabric
  • GB/T 29256.3-2012 Textiles.Woven fabrics.Construction.Methods of analysis.Part 3: Determination of crimp of yarn in fabric
  • GB/T 29256.4-2012 Textiles.Woven fabrics.Construction.Methods of analysis.Part 4:Determination of twist in yarn removed from fabrics
  • GB/T 29256.5-2012 Textiles.Woven fabrics.Construction.Methods of analysis.Part 5:Determination of linear density of yarn removed from fabric
  • GB/T 13464-1992 Thermal analysis test methods for thermal stability of materials
  • GB/T 13464-2008 Thermal analysis test methods for thermal stability of materials
  • GB/T 29256.1-2012 Textile.Woven fabrics.Construction.Methods of analysis.Part 1:Methods for the presentation of a weave diagram and plans for drafting,denting and lifting
  • GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials
  • GB/T 28731-2012 Proximate analysis of solid biofuels
  • GB/T 17802-1999 Thermal analysis test methods for kinetic constants of combustible materials
  • GB/T 38531-2020 Microbeam analysis—Computed tomography (CT) method for micro- and nano-pore structure analysis in tight rock samples
  • GB/T 14415-1993 Analysis of water used in boiler and cooling system. Determination of solids matter
  • GB/T 17802-2011 Thermal analysis test methods for Arrhenius kinetics constants of thermally unstable materials
  • GB/T 15246-2022 Microbeam analysis—Quantitative analysis of sulfide minerals by electron probe microanalysis
  • GB/T 36058-2018 Method for analysis of forestry biomas.Determination of insoluble saccharides content
  • GB/T 20175-2006 Surface chemical analysis.Sputter depth profiling.Optimization using layered systems as reference materials
  • GB 5124.4-1985 Methdos for chemical analysis of hardmetals-The photometric peroxide method for the determination of titanium content
  • GB/T 5124.4-1985 Methods for chemical analysis of hardmetals--The photometric peroxide method for the determination of titanium content
  • GB/T 5594.8-2015 Test methods for properties of structure ceramic used in electronic components and device.Part 8:Test method for microstructure

British Standards Institution (BSI), Structural Analysis Methods of Matter

  • BS ISO 7211-3:2002 Textiles - Woven fabrics - Construction - Methods of analysis - Determination of crimp of yarn in fabric
  • BS ISO 7211-6:2020 Tracked Changes. Textiles. Methods for analysis of woven fabrics construction. Determination of the mass of warp and weft per unit area of fabric
  • BS ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
  • BS ISO 7211-4:2002 Textiles - Woven fabrics - Construction - Methods of analysis - Determination of twist in yarn removed from fabric
  • BS 7738-1:1994 Specification for information systems products using SSADM (Structured Systems Analysis and Design Method) - Implementation of SSADM version 4
  • BS ISO 7211-5:2020 Textiles. Methods for analysis of woven fabrics construction - Determination of linear density of yarn removed from fabric
  • BS ISO 7211-5:2002 Textiles - Woven fabrics - Construction - Methods of analysis - Determination of linear density of yarn removed from fabric
  • BS ISO 7404-3:2009 Methods for the petrographic analysis of coals - Method of determining maceral group composition
  • BS EN ISO 21572:2013 Foodstuffs. Molecular biomarker analysis. Protein-based methods
  • PD CEN ISO/TR 24094:2007 Analysis of natural gas. Validation methods for gaseous reference materials
  • BS 1715 Sec.2.5:1989 Analysis of soaps. Quantitative test methods. Method for determination of unsaponifiable, unsaponified, and unsaponified saponifiable matter contents
  • BS EN ISO 21253-2:2019 Water quality. Multi-compound class methods - Criteria for the quantitative determination of organic substances using a multi-compound class analytical method
  • BS DD CEN/TS 15296:2006 Solid biofuels - Calculation of analyses to different bases
  • BS PD CEN/TS 17201:2018 Construction products. Assessment of release of dangerous substances. Content of inorganic substances. Methods for analysis of aqua regia digests
  • BS ISO 23812:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
  • BS ISO 15360-2:2015 Recycled pulps. Estimation of Stickies and Plastics. Image analysis method
  • BS 3762-3.25:1989 Analysis of formulated detergents - Quantitative test methods - Methods for determination of water and volatile matter content
  • BS 1715 Sec.2.11:1989 Analysis of soaps. Quantitative test methods. Method for determination of ethanol-insoluble matter content
  • BS 3762-3.5:1986 Analysis of formulated detergents - Quantitative test methods - Methods for determination of total organic matter content
  • PD CEN/TR 17421:2019 Animal feeding stuffs: Methods of sampling and analysis. Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
  • BS EN ISO 16265:2012 Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
  • BS PD ISO/TS 21569-3:2015 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetically modifie
  • BS EN 12698-1:2007 Chemical analysis of nitride bonded silicon carbide refractories - Chemical methods
  • BS EN 1767:1999 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
  • BS 3762-3.7:1986 Analysis of formulated detergents - Quantitative test methods - Method for determination of total non-ionic matter content
  • BS 3762-3.6:1986 Analysis of formulated detergents - Quantitative test methods - Method for determination of matter soluble in light petroleum
  • PD ISO/TS 21569-7:2022 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Real-time PCR methods for the detection of CaMV and Agrobacterium Ti-plasmid derived DNA sequences
  • PD ISO/TS 21569-3:2020 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening for genetically ...
  • BS EN ISO 14403-2:2012 Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA). Method using continuous flow analysis (CFA)
  • BS 1902-3.3:1981 Methods of testing refractory materials - General and textural properties - Sieve analysis (methods 1902-303)
  • BS EN 12192-2:1999 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Test method for fillers for polymer bonding agents
  • BS 3762-3.1:1990 Analysis of formulated detergents. Quantitative test methods. Method for determination of anionic-active matter content
  • PD CEN ISO/TS 29843-1:2014 Soil quality. Determination of soil microbial diversity. Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis
  • BS ISO 12787:2012 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
  • BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
  • BS 7020-3:1988 Analysis of iron ores. Method for the determination of combined water content
  • BS 1715 Sec.2.1:1989 Analysis of soaps. Quantitative test methods. Method for determination of total alkali content and total fatty matter content
  • BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
  • BS ISO 29301:2017 Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures
  • BS ISO 22157:2019 Bamboo structures. Determination of physical and mechanical properties of bamboo culms. Test methods
  • BS EN 1302:1999 Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods

IT-UNI, Structural Analysis Methods of Matter

  • UNI 6703-1970
  • UNI 3622-1955
  • UNI 3617-1955 Procedures for chemical analysis of minerals. Determination of arsenic in iron ore. Gravimetric method.
  • UNI 3664-1955 Procedures for chemical analysis of minerals. Determination of sulphur in iron ore. Gravimetric method.
  • UNI 3665-1955 Procedures for chemical analysis of minerals. Determination of total alkali in iron ore. Gravimetric method, for standard analyses.
  • UNI 3621-1955
  • UNI 3870-1957 Procedures for chemical analysis of minerals. Determination of the lead, copper and zinc content of iron minerals. Electrolytic and gravimetric method for standard analysis.
  • UNI 3623-1955 Procedures for chemical analysis of minerals. Determination of phosphorus in iron ore. Alkalimetric method, for standard analyses.
  • UNI 3869-1957 Procedures for chemical analysis of minerals. Determination of the lead, copper and zinc content of iron minerals. Gravimetric method.
  • UNI 3659-1955
  • UNI 6632-1970
  • UNI 3619-1955 Procedures for chemical analysis of minerals. Determination of combined water in iron ore.
  • UNI 3892-1957 Procedures for the chemical analysis of minerals. Determination of the titanium oxide content in titanium minerals. Cupferron gravimetric method.
  • UNI 3658-1955 Procedures for chemical analysis of minerals. Determination of titanium in iron ore. Photometric and colorimetric methods for disaggregation with sodium peroxide.
  • UNI 3620-1955 Procedures for chemical analysis of minerals. Determination of carbon dioxide in iron ore.
  • UNI 3663-1955
  • UNI 3896-1957 Procedures for the chemical analysis of minerals. Determination of the lime and megnesia content of chrome minerals.
  • UNI 3895-1957 Procedures for the chemical analysis of minerals. Determination of the silica content of chrome minerals. Sodium peroxide disaggregation method.
  • UNI 3893-1957 Procedures for the chemical analysis of minerals. Determination of the chrome content of chrome minerals. Volumetric method by means of disaggregation with sodium peroxide.
  • UNI 6649-1970 Chemical analysis of manganese ores. Determination of phosphorus. Colorimetric method.
  • UNI 6639-1970 Chemical analysis of manganese ores. Determination of nickel. Colorimetric method.
  • UNI 6653-1970 Chemical analysis of manganese ores. Determination of lead. Volumetric method.
  • UNI 6641-1970
  • UNI 6650-1970 Chemical analysis of manganese ores. Determination of copper. Gravimetric method.
  • UNI 6715-1970
  • UNI 6640-1970
  • UNI 6651-1970 Chemical analysis of manganese ores. Determination of copper. Colorimetric method.
  • UNI 6638-1970 Chemical analysis of manganese ores. Determination of nickel. Gravimetric method.
  • UNI 3661-1955
  • UNI 3894-1957 Procedures for the chemical analysis of minerals. Determination of the total iron content of chrome minerals. Volumetric method by means of disaggregation with sodium peroxide.
  • UNI 3618-1955 Procedures for chemical analysis of minerals. Determination of arsenic in iron ore. Method for reduction with stannous chloride and titration with iodine.
  • UNI 3660-1955 Procedures for chemical analysis of minerals. Determination of behaviour of iron ore to air calcination.
  • UNI 6637-1970
  • UNI 3657-1955
  • UNI 6645-1970
  • UNI 6652-1970 Chemical analysis of manganese ores. Determination of lead. Gravimetric method.
  • UNI 6647-1970 Chemical analysis of manganese ores. Determination of phosphorus. Gravimetric method.
  • UNI 6709-1970
  • UNI 6714-1970

Indonesia Standards, Structural Analysis Methods of Matter

  • SNI ISO 7211-6:2011 Textiles - Woven fabric - Construction - Method of analysis - Part 6: Determination of the mass of warp and weft per unit area of fabric
  • SNI ISO 7211-3:2010 Textiles - Woven fabrics - Construction - Methods of analysis - Part 3: Determination of crimp of yarn in fabric
  • SNI ISO 7211-4:2011 Textiles - Woven fabrics - Construction - Methods of analysis - Part 4: Determination of twist in yarn removed from fabric
  • SNI ISO 7211-2:2010 Textiles - Woven fabric - Contruction - Method of analysis - Part 2: Determination of number of threads per unit length
  • SNI ISO 7211-5:2010 Textile - Woven fabrics - Construction- Methods of analysis - Part 5: Determination of linier density of yarn removed from fabric
  • SNI ISO 7211-1:2010 Textiles - Woven fabrics - Construction - Methods of analysis -Part 1 : Methods for the presentation of a weave diagram and plans for drafting, denting and lifting
  • SNI 06-2482-1991 Water, Test method for flouride content by spectrophotometer in a red alazaryn manuver

ZA-SANS, Structural Analysis Methods of Matter

  • SANS 7211-5:1984 Textiles - Woven fabrics - Construction - Methods of analysis Part 5: Determination of linear density of yarn removed from fabric
  • SANS 7211-3:1984 Textiles - Woven fabrics - Construction - Methods of analysis Part 3: Determination of crimp of yarn in fabric
  • SANS 7211-4:1984 Textiles - Woven fabrics - Construction - Methods of analysis Part 4: Determination of twist in yarn removed from fabric
  • SANS 7211-2:1984 Textiles - Woven fabrics - Construction - Methods of analysis Part 2: Determination of number of threads per unit length
  • SANS 9455-1:1990 Soft soldering fluxes - Test methods Part 1: Determination of non-volatile matter, gravimetric method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Structural Analysis Methods of Matter

  • GB/T 34002-2017 Microbeam analysis—Analytical transmission electron microscopy—Methods for calibrating image magnification by using reference materials having periodic structures
  • GB/T 35820-2018 Method for analysis of forestry biomass — Sampling methods
  • GB/T 36057-2018 Method for analysis of forestry biomass—Determination of ash content
  • GB/T 35814-2018 Method for analysis of forestry biomass—Preparation of samples
  • GB/T 35816-2018 Standard method for analysis of forestry biomass-Determination of extractives content
  • GB/T 36055-2018 Method for analysis of forestry biomass—Determination of moisture content
  • GB/T 35809-2018 Method for analysis of forestry biomass—Determination of protein content
  • GB/T 35811-2018 Method for analysis of forestry biomass—Determination of starch content
  • GB/T 36056-2018 Method for analysis of forestry biomass—Determination of soluble saccharides content
  • GB/T 35818-2018 Standard method for analysis of forestry biomass-Determination of structural polysaccharides and lignin
  • GB/T 35905-2018 Test methods for biomass—Determination of total solids in biomass
  • GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports

Canadian General Standards Board (CGSB), Structural Analysis Methods of Matter

  • CAN/CGSB-4.2 NO.39-2004 Textile Test Methods Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 3: Determination of Crimp of Yarn in Fabric
  • CGSB 149-GP-2MP-1986 Manual for Thermographic Analysis of Building Enclosures
  • CAN/CGSB-4.2 NO.8.1-M89-1989 Textile Test Methods Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 4: Determination of Twist in Yarn Removed from Fabric
  • CGSB 4.2 NO. 6-M89-CAN/CGSB CORR-1998 TEXTILES - WOVEN FABRICS CONSTRUCTION - METHODS OF ANALYSIS - PART 2: DETERMINATION OF NUMBER OF THREADS PER UNIT LENGTH
  • CGSB 4.2 NO. 6-M89-CAN/CGSB AMD 1-2000 TEXTILE TEST METHODS TEXTILES - WOVEN FABRICS CONSTRUCTION - METHODS OF ANALYSIS - PART 2: DETERMINATION OF NUMBER OF THREADS PER UNIT LENGTH
  • CGSB 4.2 NO 6-2013-CAN/CGSB-2013 Textile test methods Textiles - Woven fabrics - Construction - Methods of analysis - Part 2: Determination of number of threads per unit length
  • CAN/CGSB-4.2 NO.6-2013 Textile test methods Textiles - Woven fabrics - Construction - Methods of analysis - Part 2: Determination of number of threads per unit length
  • CGSB 4.2 NO. 6-2013-CAN/CGSB-2013 M閠hodes pour 閜reuves textiles Textiles - Tissus - Construction - M閠hodes d抋nalyse - Partie 2 : D閠ermination du nombre de fils par unit?de longueur

Anhui Provincial Standard of the People's Republic of China, Structural Analysis Methods of Matter

Group Standards of the People's Republic of China, Structural Analysis Methods of Matter

  • T/CSCP 0035.17-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 17: Analytical Methods for Corrosion Products of Low Alloy Structural Steels
  • T/CSTM 00046.17-2018 Corrosion test of low alloy structure steels -- Part 17: Guide for corrosion products analysis methods
  • T/SSEA 0199-2022 Quality classification and evaluation methods of hot-rolled strip steel products—Part 1: Carbon structural steel and low alloy structural steel
  • T/CGA 014-2019 Method for chemical analysis of water in gold industry Determination of cyanide— Titration and spectrophotometry method

RU-GOST R, Structural Analysis Methods of Matter

  • GOST 22023-1976 Building materials. Method of microscopical quantative structure analysis
  • GOST 24295-1980 Enamelled steel ware. Analysis methods of test solutions for elements release
  • GOST 25891-1983 Buildings and structures. Methods of determination of airtightness of enclosing structures
  • GOST R 56240-2014 Copper. Spectral methods of impurity analysis
  • GOST 18622-1979 Interaction of ionizing radiations with matter. Chemical composition tissue eguivalent matter
  • GOST 25380-1982 Buildings and structures. Method of measuring density of heat flows passing through englosure structures
  • GOST 9414.3-1993 Methods for the petrographic analysis of bituminous coal and anthracite. Part 3. Method of determining maceral group composition
  • GOST R 53293-2009 Fire hazard of substances and materials. Materials, substance and fire protective means. Identification by thermal analysis methods
  • GOST 31167-2003 Buildings and structures. Methods for determination of air permeability of building envelope in field conditions
  • GOST R 54945-2012 Buildings and structures. Methods for measuring of illuminance pulsation factor
  • GOST 31167-2009 Buildings and structures. Methods for determination of air permeability of building envelopes in field conditions
  • GOST R 56733-2015 Buildings and constructions. Method for determination of the specific heat losses through inhomogeneity of the enclosing structure
  • GOST 19014.0-1973 Crystal silicon. General requirements for methods of chemical analysis

European Committee for Standardization (CEN), Structural Analysis Methods of Matter

  • EN ISO 21572:2019 Foodstuffs - Molecular biomarker analysis - Immunochemical methods for the detection and quantification of proteins (ISO 21572:2019)
  • EN ISO 21572:2013 Foodstuffs - Molecular biomarker analysis - Protein-based methods
  • EN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
  • CEN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
  • EN ISO 21253-2:2019 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)
  • EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another [Superseded: CEN CEN/TS 15296]
  • PD CEN/TS 17201:2018 Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests
  • EN 12192-2:1999 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents
  • EN ISO 7704:2023 Water quality - Requirements for the performance testing of membrane filters used for direct enumeration of microorganisms by culture methods (ISO 7704:2023)
  • EN ISO 16265:2012 Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA) (ISO 16265:2009)
  • CEN/TR 16045:2010 Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods
  • PD CEN/TR 15522-2:2012 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
  • CEN/TS 17331:2019 Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis
  • EN 1767:1999 Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Infrared Analysis
  • EN ISO 14403-2:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012)
  • EN ISO 22753:2022 Molecular biomarker analysis - Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains - General requirements (ISO 22753:2021, Corrected version 2022-11)
  • CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
  • EN 12698-1:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
  • EN 13381-8:2010 Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
  • EN 13381-8:2013 Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members

Professional Standard - Ocean, Structural Analysis Methods of Matter

  • HY/T 229-2018 Structure confirmation method of marine bioactive material of certified reference material

RO-ASRO, Structural Analysis Methods of Matter

  • SR 110-5-1995 Sugar. Methods of analysis. Determination of reducing substances
  • STAS 12680-1988 NON-ADDITIVED MINERAL OILS Carbon distribution and group struc- tural analysis by n-d-M method
  • SR 110-8-1995 Sugar. Methods of analysis. Determination of water - insoluble substances content
  • STAS SR 13355-5-1999 Beer. Analysis methods. Extract determination
  • STAS SR EN 29455-1-1994 Soft soldering fluxes. Test methods. Part 1: Determination of non-volatile matter, gravimetric method
  • STAS SR 13348-1-1996 Tea. Analysis methods. Determination of proteic nitrogen by the Kjeldahl method. Spectrophotometric method

Professional Standard - Petroleum, Structural Analysis Methods of Matter

  • SY/T 10040-2002 Recommended practice for design and analysis of stationkeeping systems for floating structures
  • SY/T 5258-1991 Chromatography-mass spectrometry identification method for biomarkers
  • SY/T 6103-2004 Image Analysis Method for Determination of Rock Pore Structure Characteristic

Danish Standards Foundation, Structural Analysis Methods of Matter

  • DS/EN 1049-2:1994 Textiles-Woven fabrics-Construction-Methods of analysis-Part 2;Determination of number of threads per unit length
  • DS/EN ISO 21572:2013 Foodstuffs - Molecular biomarker analysis - Protein-based methods
  • DS/CEN ISO/TR 24094:2008 Analysis of natural gas - Validation methods for gaseous reference materials
  • DS/ISO 22753:2021 Molecular biomarker analysis – Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains – General requirements
  • DS/CEN/TR 16045:2011 Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods
  • DS/EN ISO 16265:2012 Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA)
  • DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
  • DS/ISO/TS 21569-2:2012 Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 2: Construct-specific real-time PCR method for detection of event FP967 in linseed and linseed produc
  • DS/EN 1767:2000 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
  • DS/EN 12192-2:1999 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents
  • DS/ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques

Society of Automotive Engineers (SAE), Structural Analysis Methods of Matter

  • SAE J1215-1993 Performance Prediction of Roll-Over Protective Structures (Rops) Through Analytical Methods

SAE - SAE International, Structural Analysis Methods of Matter

  • SAE J1215-1979 PERFORMANCE PREDICTION OF ROLL-OVER PROTECTIVE STRUCTURES (ROPS) DTHROUGH ANALYTICAL METHODS

Japanese Industrial Standards Committee (JISC), Structural Analysis Methods of Matter

  • JIS L 1021:1999 Testing methods for construction of textile floor coverings
  • JIS A 1301:1994 Method of fire test for wooden structural parts of buildings
  • JIS A 1304:1994 Method of fire resistance test for structural parts of buildings
  • JIS R 6123:1995 Method for chemical analysis of aluminous abrasives
  • JIS R 6123:1998 Method for chemical analysis of alumina abrasives
  • JIS K 0170-9:2011 Testing methods for water quality by flow analysis -- Part 9: Cyanide compounds
  • JIS K 0170-6:2011 Testing methods for water quality by flow analysis -- Part 6: Fluoride
  • JIS K 6504:1976 Analytical method for vegetable tannin extracts
  • JIS P 8231:2006 Recycled pulps -- Estimation of Stickies and Plastics -- Image analysis method
  • JIS A 1452:1972 Method of abrasion test for building materials and part of building construction (falling sand method)
  • JIS A 1453:1973 Method of abrasion test for building materials and part of building construction (abrasive-paper method)
  • JIS A 1452:2015 Methods of abrasion test for building materials and part of building construction (Falling sand method)
  • JIS A 1453:2015 Methods of abrasion test for building materials and part of building construction (Abrasive-paper method)
  • JIS A 1302:1994 Method of fire test for noncombustible structural parts of buildings
  • JIS A 1414 AMD 1:2007 Methods of performance test of panels for building construction (Amendment 1)
  • JIS A 1304 AMD 1:2011 Method of fire resistance test for structural parts of buildings (Amendment 1)

German Institute for Standardization, Structural Analysis Methods of Matter

  • DIN EN 1049-2:1994 Textiles; woven fabrics; construction; methods of analysis; part 2: determination of number of threads per unit length (ISO 7211-2:1984, modified); German version EN 1049-2:1993
  • DIN EN ISO 21253-2:2022-12 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019); German version EN ISO 21253-2:2019
  • DIN EN ISO 4499-3:2016-10 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016); German version EN ISO 4499-3:2016
  • DIN CEN/TR 17421:2020-06 Animal feeding stuffs: Methods of sampling and analysis - Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis; German version CEN/TR 17421:2019
  • DIN EN ISO 21253-2:2018 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO/DIS 21253-2:2018); German and English version prEN ISO 21253-2:2018
  • DIN CEN/TR 16045:2013-12*DIN SPEC 91022:2013-12 Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods; German version CEN/TR 16045:2010
  • DIN EN 17201:2022 Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests; German and English version prEN 17201:2022
  • DIN EN 17201:2022-06 Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests; German and English version prEN 17201:2022 / Note: Date of issue 2022-05-06*Intended as replacement for...
  • DIN EN 12698-2:2007-06 Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods; German version EN 12698-2:2007
  • DIN EN 17331:2022 Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis; German and English version prEN 17331:2022
  • DIN EN 17331:2022-06 Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis; German and English version prEN 17331:2022 / Note: Date of issue 2022-05-06*Intended as replacement for DIN CEN/...
  • DIN CEN/TS 17331:2019-07*DIN SPEC 18486:2019-07 Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis; German version CEN/TS 17331:2019 / Note: To be replaced by DIN EN 17331 (2022-06).
  • DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
  • DIN EN ISO 16265:2012-05 Water quality - Determination of the methylene blue active substances (MBAS) index - Method using continuous flow analysis (CFA) (ISO 16265:2009); German version EN ISO 16265:2012
  • DIN EN ISO 17380:2013-10 Soil quality - Determination of total cyanide and easily liberatable cyanide - Continuous-flow analysis method (ISO 17380:2013); German version EN ISO 17380:2013
  • DIN EN 12698-1:2007-06 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods; German version EN 12698-1:2007
  • DIN EN 1767:1999-09 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis; German version EN 1767:1999

未注明发布机构, Structural Analysis Methods of Matter

  • BS EN 1049-2:1994(1999) Textiles — Woven fabrics — Construction — Methods ofanalysis — Part 2 : Determination ofnumber of threads per unit length
  • BS PD CEN ISO/TR 24094:2007 Analysis of natural gas — Validation methods for gaseous reference materials
  • BS 2865:1984(1999) Methods for Determination of linear density of yarn removed from fabric [ ISO title : Textiles — Woven fabrics — Construction — Methods of analysis — Part 5 : Determination of linear density of yarn removed from fabric ]
  • BS 3762-3.6:1986(2008) Analysis of formulated detergents — Part 3 : Quantitative test methods — Section 3.6 Method for determination of matter soluble in light petroleum
  • BS 684-2.4:1976(2009) Methods of analysis of Fats and fatty oils — Part 2 : Other methods — Section 2.4 : Calculation of total fatty matter
  • BS 4407:1988(1999) Methods for Quantitative analysis of fibre mixtures

CZ-CSN, Structural Analysis Methods of Matter

  • CSN 75 7301-1987 Water quality. Physical and chemical analyses of watcr. General require- ments an analytical methods
  • CSN 73 0549-1977 Thermo-teehníeal properties of engineer- ing structures and buildings. Methods of caloulation.

American Society for Testing and Materials (ASTM), Structural Analysis Methods of Matter

  • ASTM D933-84(2003) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM D933-20 Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM D5639/D5639M-11 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
  • ASTM D1910-64(1975)e1 Methods of Test for Construction Characteristics of Woven Fabrics
  • ASTM E872-82(2006) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
  • ASTM D3499-94 Standard Test Method for Toughness of Wood-Based Structural Panels
  • ASTM D3238-95(2000) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM D3238-17a Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM D3238-95(2000)e1 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM D3238-17 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM D3238-22a Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM E872-82(1998) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
  • ASTM E872-82(2019) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
  • ASTM E872-82(2013) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
  • ASTM D3775-98 Standard Test Method for Fabric Count of Woven Fabric
  • ASTM D3238-95(2005) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM D3238-95(2010) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM D3238-22 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM D3238-95(2015) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM D933-84(2012) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM C567-00 Standard Test Method for Determining Density of Structural Lightweight Concrete
  • ASTM D3044-16(2023) Standard Test Method for Shear Modulus of Wood-Based Structural Panels
  • ASTM D3175-02 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • ASTM D3175-01 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • ASTM D3175-11 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • ASTM E2403-06(2018) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
  • ASTM E897-88(2004) Standard Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel
  • ASTM C567-05a Standard Test Method for Determining Density of Structural Lightweight Concrete
  • ASTM C968-19 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
  • ASTM C567-04 Standard Test Method for Determining Density of Structural Lightweight Concrete
  • ASTM C567/C567M-14 Standard Test Method for Determining Density of Structural Lightweight Concrete
  • ASTM C271/C271M-05 Standard Test Method for Density of Sandwich Core Materials
  • ASTM C271/C271M-11 Standard Test Method for Density of Sandwich Core Materials
  • ASTM D3175-18 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • ASTM D3175-07 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • ASTM D3175-89a(1997) Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • ASTM D3175-20 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • ASTM D3175-17 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • ASTM UOP832-83 Carbon Structure of C9 and Lower Boiling Hydrocarbons by Gas Chromatography
  • ASTM C1718-10 Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
  • ASTM D4025-08a Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM F2877-11 Standard Test Method for Shock Testing of Structural Insulation of a Class Divisions Constructed of Steel or Aluminum
  • ASTM E2997-16 Standard Test Method for Analysis of Biodiesel Products by Gas Chromatography-Mass Spectrometry
  • ASTM E1950-10 Standard Practice for Reporting Results from Methods of Chemical Analysis
  • ASTM E1950-98 Standard Practice for Reporting Results from Methods of Chemical Analysis
  • ASTM D1137-53 Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer
  • ASTM F2877/F2877M-13e1 Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum

Professional Standard - Public Safety Standards, Structural Analysis Methods of Matter

  • GA/T 76-1994 Test method for thermal analysis of the constant temperature stability of substances

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Structural Analysis Methods of Matter

  • ASHRAE LO-09-052-2009 Comparative Analysis of Optimization Approaches to Design Building Envelope for Residential Buildings

American Welding Society (AWS), Structural Analysis Methods of Matter

  • WRC 229:1977 Part 1: Dynamic Fracture-Resistance Testing and Methods For Structural Analysis

PL-PKN, Structural Analysis Methods of Matter

  • PN H04240-00-1986 Chemical analysis of sintered carbides Prescription
  • PN H04240-05-1992 Chemical analysis of sintered carbides (hardmetals) Determination of total carbon content
  • PN G04529-1992 Hard coal Method for the petrographic analysis Determination of contents of maceral groups and minera? matter
  • PN A04022-1964 Methods of sensoric analysis Analys?s of particular charac- teristics and over-all ?uality by scoring methods. Principles of the construction of scoring models for individual food products

Professional Standard - Electricity, Structural Analysis Methods of Matter

ES-UNE, Structural Analysis Methods of Matter

  • UNE-CEN ISO/TR 24094:2012 IN Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 24094:2006)
  • UNE-EN ISO 21253-2:2020 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)
  • UNE-EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016)
  • UNE-CEN/TR 17421:2019 Animal feeding stuffs: Methods of sampling and analysis - Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis (Endorsed by Asociación Española de Normalización in November of 2019.)
  • UNE-EN ISO 17380:2013 Soil quality - Determination of total cyanide and easily liberatable cyanide - Continuous-flow analysis method (ISO 17380:2013) (Endorsed by AENOR in August of 2013.)

Professional Standard - Education, Structural Analysis Methods of Matter

  • JY/T 0588-2020 General Rules for Determination of Crystal and Molecular Structure of Small Molecular Compounds by Single Crystal X-ray Diffraction
  • JY/T 008-1996 General Rules for Determination of Crystal and Molecular Structure of Small Molecular Compounds by Four-Circle Single Crystal X-ray Diffractometer

The American Road & Transportation Builders Association, Structural Analysis Methods of Matter

  • AASHTO T 339-2010 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content

AASHTO - American Association of State Highway and Transportation Officials, Structural Analysis Methods of Matter

  • T 339-2009 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
  • TP 67-2006 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
  • T 339-2010 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
  • TP 67-2003 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
  • TP 67-2005 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
  • TP 66-2005 Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS)
  • TP 66-2006 Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS)
  • T 338-2009 Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS)
  • TP 66-2003 Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS)

BE-NBN, Structural Analysis Methods of Matter

IN-BIS, Structural Analysis Methods of Matter

AENOR, Structural Analysis Methods of Matter

  • UNE-EN ISO 21572:2013 Foodstuffs - Molecular biomarker analysis - Protein-based methods (ISO 21572:2013)
  • UNE 34081:1975 ANALYSIS METHODS FOR CHOCOLATES. MILK PROTEINS.
  • UNE-EN 1767:2000 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. INFRARED ANALYSIS.
  • UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.

Professional Standard - Geology, Structural Analysis Methods of Matter

  • DZ/T 0064.66-2021 Analytical methods of groundwater quality - Part 66: Determination of sulfides by iodometric method
  • DZ/T 0064.8-2021 Analytical methods for groundwater quality - Part 8: Gravimetric method for the determination of suspended solids
  • DZ/T 0064.50-2021 Analytical methods of groundwater quality - Part 50: Determination of chloride by argentometric titration
  • DZ/T 0064.53-2021 Analytical methods of groundwater quality - Part 53: Determination of fluoride Alizarin complex spectrophotometric method
  • DZ/T 0064.56-2021 Methods of Analytical Groundwater Quality Part 56: Determination of Iodide Starch Spectrophotometry
  • DZ/T 0064.46-2021 Methods of Analytical Groundwater Quality Part 46: Determination of Bromide Spectrophotometric Method with Bromophenol Red
  • DZ/T 0064.54-2021 Analytical methods of groundwater quality - Part 54: Determination of fluoride by ion selective electrode method
  • DZ/T 0064.55-2021 Methods of Analytical Groundwater Quality Part 55: Determination of Iodide by Catalytic Reduction Spectrophotometry

American National Standards Institute (ANSI), Structural Analysis Methods of Matter

  • ANSI/ASTM D3417:1999 Test Method for Heats of Fusion and Crystallization of Polymers by Thermal Analysis
  • ANSI/ASTM F2877:2013 Test Method foroShock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum

国家能源局, Structural Analysis Methods of Matter

  • SY/T 6103-2019 Image analysis method for determining rock pore structure characteristics

Professional Standard - Agriculture, Structural Analysis Methods of Matter

Standard Association of Australia (SAA), Structural Analysis Methods of Matter

  • AS 2300.1.8.1:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Analytical quality assurance of instrumental methods - Protein in milk
  • AS/NZS 3580.10.2:2013
  • AS ISO 14606:2006 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials

Lithuanian Standards Office , Structural Analysis Methods of Matter

  • LST EN 1049-2-1998 Textiles - Woven fabrics - Construction - Methods of analysis - Part 2: Determination of number of threads per unit length (ISO 7211-2:1984 modified)
  • LST EN 1767-2000 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
  • LST EN 12192-2-2000 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents

Association of German Mechanical Engineers, Structural Analysis Methods of Matter

国家文物局, Structural Analysis Methods of Matter

  • WW/T 0055-2014 Standard morphology and structure analysis method for extracting scientific and technological information on ancient ceramics

IX-FAO, Structural Analysis Methods of Matter

国家林业和草原局, Structural Analysis Methods of Matter

  • LY/T 3243-2020 Biomass briquette fuel crush resistance test method and industrial analysis method

AT-ON, Structural Analysis Methods of Matter

  • OENORM L 1051-2021 Analysis of soils - Sampling with maintaining the soil structure (core cyclinder method)
  • ONORM S 2023-1993 Analytical methods and quality control of compost
  • ONORM M 6600-1992 Water analysis - Statistical methods in water analysis - Terms and definitions

SE-SIS, Structural Analysis Methods of Matter

  • SIS SS-ISO 7211-2:1990 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length

Professional Standard - Building Materials, Structural Analysis Methods of Matter

  • JC/T 1021.2-2007 Methods for chemical analysis of nonmetal mineral and rock Part 2: Methods for chemical analysis of silicate rock、mineral and Kiesel material

TR-TSE, Structural Analysis Methods of Matter

  • TS 894-1970 METHODS OF ANALYSIS FOR EDIBLE OILS OF VEGETABLE ORIGIN
  • TS 1104-1972 DETERMINATION OF TRASCH CONTENT OF COTTON AND WASTE (SHIRLEY ANALYSER METHOD)

Professional Standard - Electron, Structural Analysis Methods of Matter

Malaysia Standards, Structural Analysis Methods of Matter

CEN - European Committee for Standardization, Structural Analysis Methods of Matter

  • PD CEN/TS 17331:2019 Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis

GOSTR, Structural Analysis Methods of Matter

  • GOST 34445-2018 Nanomaterials. Nanostructured oxide magnesium. Technical requirements and test (analysis) methods
  • GOST R 56733-2020 Buildings and constructions. Determination of the specific heat losses through inhomogeneity of the enclosing structure
  • GOST 34308-2017 Plant quarantine. Pest risk analysis for regulated non-quarantine pests. The structure and requirements
  • GOST 34444-2018 Nanomaterials. Nanostructured hydroxide magnesium. Technical requirements and test (analysis) methods

YU-JUS, Structural Analysis Methods of Matter

  • JUS B.B8.081-1981 Calcium carbonate pigments. Methods for chemical analysis. Determination matters insoluble in hydro-hloricacid
  • JUS B.G8.055-1982 Methods of analysis of iron ore?. Experimentalmethods for evahiation of quality variation

HU-MSZT, Structural Analysis Methods of Matter

AR-IRAM, Structural Analysis Methods of Matter

Professional Standard - Energy, Structural Analysis Methods of Matter

  • NB/SH/T 0859-2013 Standard test method for the thermal stability of chemicals by thermal analysis

Heilongjiang Provincial Standard of the People's Republic of China, Structural Analysis Methods of Matter

European Association of Aerospace Industries, Structural Analysis Methods of Matter

  • AECMA PREN 2781-1997 Aerospace Series Non-Metallic Materials Structural Adhesives Test Methods Determination of the Primer Thickness

中华人民共和国环境保护部, Structural Analysis Methods of Matter

  • GB/T 13273-1991 Water quality-Determination of 131I in plant and animal thyroid gland

American Petroleum Institute (API), Structural Analysis Methods of Matter

International Electrotechnical Commission (IEC), Structural Analysis Methods of Matter

  • IEC 61189-2/COR1:1997 Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
  • IEC 61189-2:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved