ZH
RU
ES

energetic charged particles

energetic charged particles, Total:216 items.

In the international standard classification, energetic charged particles involves: Geology. Meteorology. Hydrology, Radiation measurements, Non-destructive testing, Nuclear energy engineering, Wind turbine systems and other alternative sources of energy, Vocabularies, Physics. Chemistry, Quality, Electricity. Magnetism. Electrical and magnetic measurements, Astronomy. Geodesy. Geography, Ventilators. Fans. Air-conditioners, Electrical wires and cables, Analytical chemistry, Information technology (IT) in general, Installations in buildings, Components for electrical equipment, Test conditions and procedures in general, Transport, Applications of information technology, Cellular materials, Rubber and plastics products, Power transmission and distribution networks, Radiation protection, Non-ferrous metals, Powder metallurgy, Optics and optical measurements, Optical equipment, Wastes, Aerospace electric equipment and systems, Plastics, Electronic tubes, Radiocommunications, Electromagnetic compatibility (EMC), Electronic components in general, Fuel cells, Networking, Road vehicle systems, Electromechanical components for electronic and telecommunications equipment, Company organization and management, Electrical equipment for working in special conditions, Interface and interconnection equipment, Space systems and operations, Technical drawings, Standardization. General rules, Optoelectronics. Laser equipment, Integrated circuits. Microelectronics, Electric road vehicles, Telecommunication systems, Environmental testing, Aircraft and space vehicles in general, On-board equipment and instruments, Galvanic cells and batteries, Commercial vehicles, Open systems interconnection (OSI), Lamps and related equipment, Printed circuits and boards.

CZ-CSN, energetic charged particles

CSN 40 1151-1987 Industrial accelerators of the charged particles
CSN 40 1150-1987 Accelerator of charged particles. Terminology
CSN IEC 68-2-35:1995 Electrotechnical and electronic products.Basic environmental testing procedures.Part 2-35:Test Fda:Random vibration wide band-Reproducibility High

中国气象局, energetic charged particles

QX/T 546-2020 Terminology for space high-energy particle radiation effects

RU-GOST R, energetic charged particles

GOST R 25645.165-2001 Solar energetic particles. Probabilistic model for proton fluxes
GOST R 52103-2003 Charged particle accelerators. Terms and definitions
GOST 4.477-1987 Product-quality index system. Charged-particle accelerators for industrial application. Index nomenclature
GOST 25645.156-1991 Quasitrapped and precipitating charge particles. Temporai and energy characteristics
GOST 27632-1988 Charged particle accelerators for industrial application. General technical requirements
GOST 26278-1984 Charged-particle accelerators for industry applications. Types and basic parameters
GOST R 50517-1993 Polymer membranes. The method of determination of weight fraction of latex particles not permeated through microfiltration membranes
GOST 26114-1984 Non-destructive testing. Flow detection equipment on the basic of particle accelerators. Main parameters and general technical requirements
GOST 25645.139-1986 Natural radiation belts of Earth. Model of spatial and energy distribution of electron flux
GOST R ISO 12405-2-2014 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. Part 2. High-energy applications
GOST R 55845-2013 Reagents and high purity substances. Determination of impurities of chemical elements by atomic-emission spectrometry with inductively coupled plasma

American Society for Testing and Materials (ASTM), energetic charged particles

ASTM E821-16 Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E821-96(2003) Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E821-96 Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E821-96(2009) Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E821-16(2023) Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E521-96 Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation
ASTM E521-96(2003) Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation
ASTM F20-66 Specification for High Conductivity Composite Aluminum-Steel-Copper Strip for Electron Tubes
ASTM F1471-93(2001) Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System
ASTM E521-96(2009)e2 Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation
ASTM E521-96(2009) Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation
ASTM E521-96(2009)e1 Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation
ASTM E521-16 Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation
ASTM E521-23 Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation
ASTM E3084-17(2022)e1 Standard Practice for Characterizing Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
ASTM E3084-17 Standard Practice for Characterizing Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
ASTM B965-09 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
ASTM B965-09(2018) Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
ASTM B965-09(2014) Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability

Professional Standard - Building Materials, energetic charged particles

JC/T 2018-2010 Thallium doped cesium iodide crystal for high-energy particles detection

GOSTR, energetic charged particles

GOST 22491-1987 Charged-particle accelerators. Terms and definitions

Professional Standard - Nuclear Industry, energetic charged particles

EJ/T 368-1989 HEPA filter performance test method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, energetic charged particles

GB/T 5201-1994 Test procedures for semiconductor charged particle detectors
GB/T 5201-2012 Test procedures for semiconductor charged particle detectors
GB/T 43092-2023 High-temperature performance test method for electrochemical performance testing of lithium-ion battery cathode materials
GB/T 33014.5-2016 Road vehicles.Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy.Part 5:Stripline
GB/T 29731-2013 Surface chemical analysis.High-resolution Auger electron spectrometers.Calibration of energy scales for elemental and chemical-state analysis
GB/T 18909-2002 Sectional specification for high-frequency inductors and intermediate frequency transformers for use in electronic equipment for capability approval
GB/T 2423.12-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high
GB/T 31467.2-2015 Lithium-ion traction battery pack and system for electric vehicles.Part 2:Test specification for high energy applications
GB/T 33014.2-2016 Road vehicles.Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy.Part 2:Absorber-lined shielded enclosure
GB/T 33014.11-2023 Test methods for immunity of road vehicle electrical/electronic components to narrowband radiated electromagnetic energy Part 11: Reverberation chamber method

American National Standards Institute （ANSI), energetic charged particles

ANSI/IEEE 300:1988 Test Procedures for Semiconductor Charged-Particle Detectors
ANSI/GEIA STD-0005-3-A-2013 Performance Testing for Aerospace and High Performance Electronic Interconnects Containing Pb-free Solder and Finishes
ANSI/GEIA STD-0005-2-A-2012 Standard for Mitigating the Effects of Tin Whiskers in Aerospace and High Performance Electronic Systems
ANSI/ISA 12.16.01*IEC 60079-7:2002 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety "e"
ANSI X3.183-1991 Information Systems - High-Performance Parallel Interface - Mechanical, Electrical and Signalling Protocol Specification (HIPPI-PH)

Military Standard of the People's Republic of China-General Armament Department, energetic charged particles

GJB 8767-2015 Specification for high tightness electrical insulating paper tape for high energy batteries
GJB 5107A-2019 Specifications for space high-energy electron detectors
GJB 5107-2004 Specifications for space high-energy electron detectors
GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
GJB 8385-2015 Test specifications of injection method for narrow-band HPM effects on military electronic systems

International Electrotechnical Commission (IEC), energetic charged particles

IEC 60333:1993 Nuclear instrumentation; semiconductor charged-particle detectors; test procedures
IEC 60329:1985 Strip-wound cut cores of grain oriented silicon-iron alloy, used for electronic and telecommunication equipment
IEC 60151-13:1966 Measurements of the electrical properties of electronic tubes. Part 13 : Methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves
IEC TR 62240-1:2018 RLV Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating
IEC TR 62240-1:2018 Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating
IEC 61076-4-116:2015 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
IEC 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors: Detail specification for a high-speed two-part connector with integrated shielding function
IEC 62977-3-4:2023 Electronic displays - Part 3-4: Evaluation of optical performances - High dynamic range displays
IEC TS 62686-1:2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and disc
IEC TS 62686-1:2020 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and disc
IEC TS 62686-1:2012 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors
IEC TS 62686-1:2020 RLV Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and disc
IEC TS 62396-4:2008 Process management for avionics - Atmospheric radiation effets - Part 4: Guidelines for designing with high voltage aircraft electronics and potential single event effects
IEC PAS 62396-4:2007 Process management for avionics - Atmospheric radiation effets - Part 4: Guidelines for designing with high voltage aircraft electronics and potential single event effects
IEC PAS 62686-2:2016 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components
IEC TS 62686-2:2019 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., energetic charged particles

IEEE 300-1988 Standard Test Procedures for Semiconductor Charged-Particle Detectors
IEEE 300-1982 STANDARD TEST PROCEDURES FOR SEMICONDUCTOR CHARGED-PARTICLE DETECTORS

Institute of Electrical and Electronics Engineers (IEEE), energetic charged particles

IEEE Std 300-1988 IEEE Standard Test Procedures for Semiconductor Charged-Particle Detectors
ANSI/IEEE Std 300-1982 IEEE Standard Test Procedures for Semiconductor Charged-Particle Detectors

GM North America, energetic charged particles

GM GM6419M-2001 Performance Requirements of Ultra High Modecular Weight Polyethlene (UHMW PE) Tape
GM6419M-2011 Performance Requirements of Ultra High Molecular Weight Polyethylene (UHMW PE) Tape Issue 3; Do Not Use on New Programs; No Replacement

US-FCR, energetic charged particles

FCR COE ETN 78-6 SUPPLEMENT 1-1980 POSSIBLE HAZARD FROM HIGH INTENSITY DISCHARGE LAMPS
FCR COE ETN 78-6-1978 POSSIBLE HAZARD FROM HIGH INTENSITY DISCHARGE LAMPS

National Metrological Technical Specifications of the People's Republic of China, energetic charged particles

JJF 1026-1991 Absorbed Dose Determination in Photon and Electron Beams

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, energetic charged particles

GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method
GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method

Group Standards of the People's Republic of China, energetic charged particles

T/ZZB 2680-2022 Intelligent grounding box for integrated high voltage cable live monitoring
T/SDIE 3-2017 UHF electronic tag performance test specification
T/CMA SB058-2021 Protective performance test of water meter with electronic devices
T/ZZAS 001-2018 Test method for electrical performance of high power lithium-ion battery
T/CES 091-2022 Technical specification for integrated intelligent grounding box with live monitoring function of high voltage cable
T/CIET 125-2023 Technical requirements for high performance extremely thin electrolytic copper foil for lithium ion batteries
T/CIET 222-2023 Technical requirements for high-performance ultra-thin electrolytic copper foil for lithium-ion batteries
T/CAMIE 01-2022 Technical requirements for intelligent disassembly of high-value electronic components of waste circuit board
T/ESD 3012-2023 Antistatic performance requirements for thermoplastic intrinsically static dissipative polymer materials
T/GHDQ 46-2019 Performance requirements and test methods of fuel cell system for electric vehicles in frigid regions
T/ITS 0063-2017 Digital Map for Intelligent Vehicle Data Model & Exchange Format Specification- Part 1: Expressway
T/ZSA 4002.01-2017 Smart car electronic map data model and exchange format Part 1: Expressway
T/GHDQ 4-2017 Performance requirements and test methods of Lithium-ion battery pack for electric vehicles in frigid regions

国家市场监督管理总局、中国国家标准化管理委员会, energetic charged particles

GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air
GB/T 36533-2018 Determination of the chemical state of micro-iron in silicate—Auger electron spectroscopy
GB/T 37312.1-2019 Process management for avionics—Electronic components for aerospace, defence and high performance (ADHP) applications—Part 1: General requirements for high reliability integrated circuits and discrete semiconductors
GB/T 33014.8-2020 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 8:Immunity to magnetic fields

British Standards Institution (BSI), energetic charged particles

BS EN 16062:2011 Intelligent transport systems. eSafety. eCall high level application requirements (HLAP)
PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
DD IEC/TS 62396-4:2008 Process management for avionics. Atmospheric radiation effects - Guidelines for designing with high voltage aircraft electronics and potential single event effects
DD IEC/PAS 62396-4:2007 Process management for avionics. Atmospheric radiation effects - Guidelines for designing with high voltage aircraft electronics and potential single event effects
PD IEC/TR 62240-1:2018 Tracked Changes. Process management for avionics. Electronic components capability in operation. Temperature uprating
BS IEC 62977-3-4:2023 Electronic displays - Evaluation of optical performances. High dynamic range displays
BS EN 61076-4-116:2012 Connectors for electronic equipment. Product requirements. Printed board connectors. Detail specification for a high-speed two-part connector with integrated shielding function
BS PD IEC/TS 62686-1:2015 Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications. General requirements for high reliability integrated circuits and discrete semiconductors
PD IEC TS 62686-1:2020 Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications. General requirements for high reliability integrated circuits and discrete semiconductors
BS ISO 17520:2016 Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
BS ISO 12405-2:2012 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. High-energy applications
BS EN 61076-3-112:2006 Connectors for electronic equipment - Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment
BS ISO 11451-4:2013 Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Bulk current injection (BCI)
BS CECC 23100-003:1996 Harmonized system of quality assessment for electronic components - Capability detail specification: single and double sided printed boards with plain holes
BS ISO 11452-3:2016 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Transverse electromagnetic (TEM) cell
23/30432825 DC BS ISO 17520. Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
BS PD CEN/TS 17184:2018 Intelligent transport systems. eSafety. eCall High level application Protocols (HLAP) using IMS packet switched networks
BS ISO 11451-2:2015 Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. Off-vehicle radiation sources

Association Francaise de Normalisation, energetic charged particles

NF P99-258:2011 Intelligent transport systems - ESafety - ECall high level application requirements (HLAP).
NF R13-013-7*NF ISO 11452-7:2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7 : direct Radio Frequency (RF) power injection
NF C93-406-4-116*NF EN 61076-4-116:2012 Connectors for electronic equipment - Product requirements - Part 4-116 : printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
NF ISO 17974:2009 Analyse chimique des surfaces - Spectromètres d'électrons Auger à haute résolution - Étalonnage des échelles d'énergie pour l'analyse élémentaire et de l'état chimique
NF Z82-493*NF EN 301039:2002 Private Integrated Services Network (PISN) - Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing
NF R13-013-5*NF ISO 11452-5:2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5 : stripline

Professional Standard - Aerospace, energetic charged particles

QJ 1149.4-1987 Efficient Stress Screening Method for Electronic Products Random Vibration of Magnetic Tape

PL-PKN, energetic charged particles

PN J01102-1989 Nuclear technics Charged particles accelerators for industrial applications Terms and definitions of ?uality coefficient

Korean Agency for Technology and Standards (KATS), energetic charged particles

KS A IEC 61018:2012 High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes
KS R ISO 11452-5:2013 Road vehicles－Component test methods for electrical disturbances from narrowband radiated electromagnetic energy－Part 5：Stripline
KS R ISO 11452-5:2002 Road vehicles-Electrical disturbances by narrowband radiated electromagnetic energy-Component test methods-Part 5:Stripline
KS R ISO 12405-2:2016 Electrically propelled road vehicles ― Test specification for lithium-ion traction battery packs and systems ― Part 2: High-energy applications
KS D ISO 17974-2011(2016) Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS X 3119-1-2008 Information technology-High-Performance ParalleI Interface-Part 1:Mechanical, electrical and signalling protocol specification(HIPPI-PH)
KS R ISO 11452-7:2002 Road vehicles-Electrical disturbances by narrowbandradiated electromagnetic energy-Component test methods-Part 7:Direct radio frequency (RF) power injection
KS R ISO 11452-7:2013 Road vehicles-Component test methods for electrical disturbances from narrowband radiated electromagnetic energy-Part 7:Direct radio frequency (RF) power injection
KS R ISO 6597:2005 Road vehicles-Motor vehicles with hydraulic braking systems withand without antilock device-Measurement of braking performance
KS R ISO 6597:2015 Road vehicles-Motor vehicles with hydraulic braking systems withand without antilock device-Measurement of braking performance
KS R ISO 11451-4:2013 Road vehicles-Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy-Part 4:Bulk current injection (BCI)
KS R ISO 11451-4:2002 Road vehicles-Electrical disturbances by narrowband radiated electromagnetic energy-Vehicle test methods-Part 4:Bulk current injection(BCI)
KS R ISO 11452-3:2002 Road vehicles-Electrical disturbances by narrowbandradiated electromagnetic energy-Component test methods-Part 3:Transverse electromagnetic (TEM) cell
KS R ISO 11452-3:2013 Road vehicles－Component test methods for electrical disturbances from narrowband radiated electromagnetic energy－Part 3：Transverse electromagnetic (TEM) cell

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, energetic charged particles

GB/T 34831-2017 Nanotechnologies—Electron microscopy imaging of noble metal nanoparticles—High angle annular dark field imaging method
GB/T 33014.1-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 1: General
GB/T 33014.4-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 4: Bulk current injection (BCI)
GB/T 33014.3-2016 Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 3: Transverse electromagnetic（TEM）cell

German Institute for Standardization, energetic charged particles

DIN 44402-14:1971-10 Measurements of electrical properties of electronic tubes; methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves
DIN 6800-2:2020-08 Procedures of dosimetry with probe-type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation
DIN 44402-14:1971 Measurements of electrical properties of electronic tubes; methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves
DIN EN 16062:2012 Intelligent transport systems - eSafety - eCall high level application requirements (HLAP); German version EN 16062:2011
DIN EN 300652:2001 Broadband Radio Access Networks (BRAN) - High PErformance Radio Local Area Network (HIPERLAN) Type 1 - Functional specification (Endorsement of the English version EN 300652 V 1.2.1 (1998-07) as German standard)
DIN 6809-6:2004 Clinical dosimetry - Part 6: Application of high energy photon and electron radiation in percutaneous radiotherapy
DIN 6809-6:2020 Clinical dosimetry - Part 6: Application of high energy photon and electron radiation in teleradiotherapy
DIN 6809-6:2020-11 Clinical dosimetry - Part 6: Application of high energy photon and electron radiation in teleradiotherapy
DIN EN 16062:2015 Intelligent transport systems - ESafety - eCall high level application requirements (HLAP) using GSM/UMTS circuit switched networks; German version EN 16062:2015
DIN EN 16062 Berichtigung 1:2012 Intelligent transport systems - eSafety - eCall high level application requirements (HLAP); German version EN 16062:2011, Corrigendum to DIN EN 16062:2012-01
DIN EN 301924:2003 Private Integrated Services Network (PISN) - Mapping functions for the employment of 64 kbit/s circuit mode connections with 8 kbit/s sub-multiplexing (ISO/IEC 17311 (2002), modified) (Endorsement of the English version EN 301924 V 1.1.1 (2002-09) as Germ
DIN 43857-5:1998-05 Watthour meters in moulded case without instrument transformers up to 60 A rated maximum current - Part 5: Principal dimensions for terminal cover
DIN 6800-2 Berichtigung 1:2010 Procedures of dosimetry with probe type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation, Corrigendum to DIN 6800-2:2008-03
DIN 6800-2:2008 Procedures of dosimetry with probe type detectors for photon and electron radiation - Part 2: Ionization chamber dosimetry of high energy photon and electron radiation
DIN 43857-3:1974-12 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters
DIN 43857-4:1974-12 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters

TR-TSE, energetic charged particles

TS 2453-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 13 : METHODS OF MEASUREMENT OF EMISSION CORRENT FROM HOT CATHODES FOR HIGH- VACUUM ELECTRONIC TUBES AND VALVES

Government Electronic & Information Technology Association, energetic charged particles

GEIA-STD-0005-2-2006 Standard for Mitigating the Effects of Tin Whiskers in Aerospace and High Performance Electronic Systems
GEIA-STD-0005-3-2008 Performance Testing for Aerospace and High Performance Electronic Interconnects Containing Pb-free Solder and Finishes
GEIA-STD-0005-1-2006 Performance Standard for Aerospace and High Performance Electronic Systems Containing Lead-free Solder
GEIA-HB-0005-2-2007 Technical Guidelines for Aerospace and High Performance Electronic Systems Containing Lead-free Solder and F inishes

Professional Standard - Electron, energetic charged particles

SJ/Z 9010.13-1987 Measurements of electrical properties of electronic tubes and valves--Part 13: Methods of measurement for emission current from hot cathodes for high-vacuum electronic tubes and valvea

Danish Standards Foundation, energetic charged particles

DS/EN 300652 V1.2.1:2002 Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Functional specification
DS/ISO 12405-2:2012 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 2: High-energy applications

Lithuanian Standards Office , energetic charged particles

LST EN 300 652 V1.2.1-2002 Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN)Type 1; Functional specification

SE-SIS, energetic charged particles

SIS SS 421 50 10-1979 Equipment for work in electrically energized systems (max 1000 V) — Clothing to be used in work — Design and testing

ETSI - European Telecommunications Standards Institute, energetic charged particles

ETSI EN 300 652:1998 Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Functional Specification (V1.2.1)
TR 101 031-1999 Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN); Type 2; Requirements and Architectures for Wireless Broadband Access (V2.2.1)
TS 103 433-2016 High-Performance Single Layer Directly Standard Dynamic Range (SDR) Compatible High Dynamic Range (HDR) System for use in Consumer Electronics devices (SL-HDR1) (V1.1.1)

Defense Logistics Agency, energetic charged particles

DLA SMD-5962-85153 REV D-2013 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, DUAL J-K FLIP-FLOP WITH RESET, MONOLITHIC SILICON
DLA SMD-5962-85154 REV D-2013 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, DUAL J-K FLIP-FLOP WITH RESET, MONOLITHIC SILICON
DLA DSCC-VID-V62/06609-2006 MICROCIRCUIT, DIGITAL, ADVANCED BIPOLAR CMOS, 16-BIT BUS TRANSCEIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA DSCC-VID-V62/11601 REV A-2013 MICROCIRCUIT, LINEAR, SINGLE 9 AMP HIGH SPEED LOW SIDE MOSFET DRIVER WITH ENABLE, MONOLITHIC SILICON
DLA DSCC-VID-V62/11601 REV B-2013 MICROCIRCUIT, LINEAR, SINGLE 9 AMP HIGH SPEED LOW SIDE MOSFET DRIVER WITH ENABLE, MONOLITHIC SILICON
DLA SMD-5962-84150 REV F-2009 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, DUAL J-K FLIP-FLOP WITH SET AND RESET, MONOLITHIC SILICON
DLA DSCC-VID-V62/07624 REV A-2010 MICROCIRCUIT, DIGITAL, DUAL 4-A HIGH-SPEED LOW-SLIDE MOSFET DRIVER WITH ENABLE, MONOLITHIC SILICON
DLA SMD-5962-90512-1992 MICROCIRCUIT, DIGITAL, HMOS, 8-BIT MICROCOMPUTER, MONOLITHIC SILICON
DLA SMD-5962-92190 REV C-2013 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D FLIP-FLOP WITH CLOCK ENABLE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-96570 REV C-2008 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, RADIATION HARDENED, OCTAL BUFFER AND LINE DRIVER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-88534 REV C-2008 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, DUAL J-K FLIP-FLOP WITH SET AND CLEAR, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-89702 REV B-2011 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, DUAL J-K FLIP-FLOP WITH SET AND RESET, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-90701 REV B-2012 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, DUAL J-K FLIP-FLOP WITH SET AND RESET, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-89769 REV B-2012 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, OCTAL D-TYPE FLIP-FLOP WITH DATA ENABLE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-89735 REV F-2013 MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL D-TYPE FLIP-FLOP WITH RESET, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

SAE - SAE International, energetic charged particles

SAE ARP6248-2016 Stripline Test Method to Characterize the Shielding Effectiveness of Conductive EMI Gaskets up to 40 GHz
SAE GEIASTD0005_1A-2012 Performance Standard for Aerospace and High Performance Electronic Systems Containing Lead-free Solder (Formerly TechAmerica GEIA-STD-0005-1-A)

Society of Automotive Engineers (SAE), energetic charged particles

SAE ARP6248-2022 Stripline Test Method to Characterize the Shielding Effectiveness of Conductive EMI Gaskets up to 40 GHz
SAE ARP6379-2016 Processes for Application-Specific Qualification of Electrical, Electronic, and Electromechanical Parts and Sub-Assemblies for Use in Aerospace, Defense, and High Performance Systems
SAE GEIASTD0005_3A-2018 Performance Testing for Aerospace and High Performance Electronic Interconnects Containing Pb-free Solder and Finishes
SAE GEIAHB0005_3-2015 Rework/Repair Handbook to Address the Implications of Lead-Free Electronics and Mixed Assemblies in Aerospace and High Performance Electronic Systems
SAE GEIAHB0005_2-2016 Technical Guidelines for Aerospace and High Performance Electronic Systems Containing Lead-free Solder and Finishes

International Organization for Standardization (ISO), energetic charged particles

ISO 11452-5:1995 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 5: Stripline
ISO 17520:2016 Space environment (natural and artificial) - Cosmic ray and solar energetic particle penetration inward the magnetosphere - Method of determination of the effective vertical cut-off rigidity
ISO/DIS 17520:2023 Space environment (natural and artificial) — Cosmic ray and solar energetic particle penetration inward the magnetosphere — Method of determination of the effective vertical cut-off rigidity
ISO 12405-2:2012 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 2: High-energy applications
ISO 6597:2005 Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures
ISO 11452-4:1995 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 4: Bulk current injection (BCI)
ISO 11452-4:2011 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods

National Electrical Manufacturers Association（NEMA), energetic charged particles

NEMA 410-2011 PERFORMANCE TESTING FOR LIGHTING CONTROLS AND SWITCHING DEVICES WITH ELECTRONIC DRIVERS AND DISCHARGE BALLASTS

未注明发布机构, energetic charged particles

BS ISO 17974:2002(2010) Surface chemical analysis — High - resolution Auger electron spectrometers — Calibration of energy scales for elemental and chemical - state analysis

IEC - International Electrotechnical Commission, energetic charged particles

TS 62686-1-2012 Process management for avionics – Electronic components for aerospace@ defence and high performance (ADHP) applications – Part 1: General requirements for high reliability integrated circuits and discrete semiconductors (Edition 1.0)
TS 62686-2-2019 Process management for avionics - Electronic components for aerospace@ defence and high performance (ADHP) applications - Part 2: General requirements for passive components (Edition 1.0)
PAS 62686-2-2016 Process management for avionics – Electronic components for aerospace@ defence and high performance (ADHP) applications – Part 2: General requirements for passive components (Edition 1.0)

KR-KS, energetic charged particles

KS R ISO 12405-2-2016 Electrically propelled road vehicles ― Test specification for lithium-ion traction battery packs and systems ― Part 2: High-energy applications

GM Global, energetic charged particles

GMW 16879-2013 Performance Requirements of Ultra High Molecular Weight Polyethylene (UHMW PE) Tape Issue 1; English [Replaced: GMNA GM6419M, GMNA GM6419M, GMNA GM6419M, GMNA GM6419M]

Standard Association of Australia （SAA）, energetic charged particles

AS/NZS 3580.9.15:2014

Professional Standard - Light Industry, energetic charged particles

QB/T 2986-2008 Auxiliaries for lamps.Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes).Peformance requirements

European Telecommunications Standards Institute (ETSI), energetic charged particles

ETSI TS 103 433-2016 High-Performance Single Layer Directly Standard Dynamic Range (SDR) Compatible High Dynamic Range (HDR) System for use in Consumer Electronics devices (SL-HDR1) (V1.1.1)

VN-TCVN, energetic charged particles

TCVN 6444-2009 Road vehicles.Hydraulic braking systems, including those with electronic control functions, for motor vehicles.Test procedures

NATO - North Atlantic Treaty Organization, energetic charged particles

STANAG 4341-1989 High Performance Image Intensifier Tube (IIT) with Gallium Arsenide Photocathode for Aviation Night Vision Goggles (ED 1 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nat