ZH
RU
ES

Particle Adsorber

Particle Adsorber, Total:500 items.

In the international standard classification, Particle Adsorber involves: Products of the chemical industry, Installations in buildings, Water quality, Protective equipment, Particle size analysis. Sieving, Audio, video and audiovisual engineering, Environmental protection, Fuels, Linear and angular measurements, Air quality, Cutting tools, Construction materials, Tobacco, tobacco products and related equipment, Aids for disabled or handicapped persons, Domestic, commercial and industrial heating appliances, Medical equipment, Wind turbine systems and other alternative sources of energy, Agricultural machines, implements and equipment, Internal combustion engines, Floor treatment appliances, Burners. Boilers, Insulating fluids, ENERGY AND HEAT TRANSFER ENGINEERING, Occupational safety. Industrial hygiene, Shipbuilding and marine structures in general, Physics. Chemistry, Materials for aerospace construction, Metalliferous minerals, Plant and equipment for the food industry, Soil quality. Pedology, Compressors and pneumatic machines, Components for electrical equipment, Geology. Meteorology. Hydrology, Welding, brazing and soldering, Hydraulic fluids, Semiconducting materials, Fluid power systems, Petroleum products in general, Lubricants, industrial oils and related products, Ventilators. Fans. Air-conditioners, Power transmission and distribution networks, Ceramics, Analytical chemistry, Wastes, Elements of buildings, Domestic electrical appliances in general, TESTING, Testing of metals, Metrology and measurement in general, Inorganic chemicals.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Particle Adsorber

ASHRAE QC-06-039-2006 VOC Removal Performance of Pellet/Granular-Type Sorbent Media- Experimental Results
ASHRAE 4163-1998 Particle Separation from a Uniflow Aerodynamic Deduster
ASHRAE OR-16-C025-2016 Characterizing the In-Situ Size-Resolved Removal Efficiency of Residential HVAC Filters for Fine and Ultrafine Particles
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 28-2008 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 24-1996 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 29-2012 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 24-2000 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 24-2000 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 24-2004 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 24-2004 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 29-2012 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 28-2008 AIR CLEANERS FOR PARTICULATE CONTAMINANTS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Particle Adsorber

GB/T 7701.7-1997 Granular activated carbon from coal for high adsorption performance
GB 2626-2006 Respiratory protective equipment. non-powered air-purifying particle respirator
GB/T 7702.7-1997 Standard test method for granular activated carbon from coal--Determination of iodine number
GB/T 7702.7-2008 Test method for granular activated carbon from coal.Determination of iodine number
GB/T 7702.8-2008 Test method for granular activated carbon from coal.Determination of phenol adsorption
GB/T 7702.8-1997 Standard test method for granular activated carbon from coal--Determination of phenol adsorption
GB/T 7702.6-1997 Standard test method for granular activated carbon from coal--Determination of methylene blue adsorption
GB/T 17665-1999 Test method of wooden granular activated carbon adsorption to CCI4 vapor
GB/T 7702.6-2008 Test method for granular activated carbon from coal.Determination of methylene blue adsorption
GB/T 7702.13-1997 Standard test method for granular activated carbon from coal--Determination of carbon tetrachloride adsorption
GB/T 7702.7-2023 Coal Granular Activated Carbon Test Methods Part 7: Determination of Iodine Adsorption Value
GB/T 29412-2012 Adsorber of pressure swing adsorption for hydrogen purification
GB/T 42660-2023 Calibration of aerosol particle number concentration condensation nuclei particle counters
GB 11667-1989 Hygienic standard for inhalable particles in ambient air of residential areas
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 42311-2023 Characterization of Nanoparticles in Respiratory Exposure Chambers for Nanotechnology Inhalation Toxicity Studies
GB/T 21131-2007 Environmental tobacco smoke.Estimation of its contribuion to respirable suspended particles.Determination of particulate matter by ultraviolet absorbance and by fluorescence
GB/T 6167.2-1985 Methods for testing the performance of dust particle counter--Particle concentration
GB/T 21133-2007 Environmental tobacco smoke.Estimation of its contribution to respirable suspended particles.Method based on solanesol
GB/T 7702.19-1997 Standard test method for granultar activated carbon from coal--Determination of carbon tetrachloride (CCI4) desportion
GB/T 7702.19-2008 Test method for granular activated carbon from coal.Determination of carbon tetrachloride(CCL(down4))desorption
GB/T 24351-2009 Universal technical specifications for vertical counter-flow pellet feed coolers
GB/T 18854-2015 Hydraulic fluid power.Calibration of automatic particle counters for liquids
GB/T 18854-2002 Hydraulic fluid power--Calibration of liquid automatic particle counters
GB/T 2596-1981 Tungsten powder and tungsten carbide powder--Determination of specific surface product(average graininess)--Simplified nitrogen absorption method
GB/T 27991-2011 Fundamental technical requirements for sediment measurement and particle size analysis instrument in open channel

RU-GOST R, Particle Adsorber

GOST 16187-1970 Sorbents. Method for determination of granular composition
GOST EN 12039-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of granules to coating layer adhesion
GOST 34236-2017 Light and middle distillate fuels. Determination of sizing and counting particles by automatic particle counter
GOST 12.4.246-2016 Occupational safety standards system. Respiratory protective equipment. Particle filters. General specifications
GOST R ISO 12884-2007 Ambient air. Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
GOST 33589-2015 Granular activated carbon. Standard test method for the prediction of contaminant adsorption in aqueous systems using rapid small-scale column tests
GOST 32279-2013 Iron ores, concentrates, agglomerates and pellets. Method for determination of hygroscopic water content
GOST 28110-1989 Equipment for cheese grain manufacture. Technical requirements
GOST R ISO 13138-2014 Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
GOST R 53659-2009 Iron jres, concentrates, agglomerates and pellers. Atomic abcorption method for determination of total manganese calculated as protoxide
GOST 12.4.294-2015 Occupational safety standards system. Respiratory protective devices. Filtering half masks to protect against particles. General specifications
GOST R EN 12039-2008 Roofing, hydraulic-insulating, flexible, bitumen-based materials. Method for determination of granules to coating layer adhesion

(U.S.) Ford Automotive Standards, Particle Adsorber

FORD U-MB005-8012-1996 GRANULES - OIL ABSORBENT

Professional Standard - Recommended Standards for Engineering Construction, Particle Adsorber

CECS 124-2001 Specification for design of granular active carbon adsorption tank
CECS 124-2001（条文说明） Specification for design of granular active carbon adsorption tank

国家市场监督管理总局、中国国家标准化管理委员会, Particle Adsorber

GB 2626-2019 Respiratory protection—Non-powered air-purifying particle respirator
GB/T 39748.11-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles
GB/T 39990-2021 Particulate─Bioaerosol sampler─Technical specification
GB/T 40566-2021 Granular polysilicon produced by fluidized bed method—Determination of hydrogen—Pulse heating inert gas fusion infrared absorption method

IN-BIS, Particle Adsorber

Korean Agency for Technology and Standards (KATS), Particle Adsorber

KS P 8416-2008(2019) Dust respirators for fine particles
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS I ISO 12884:2008 Ambient air－Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons－Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
KS L 6523-2016 Coated abrasives－Determination of grain size distribution of microgrits P12 to P220
KS H ISO 15593:2009 Environmental tobacco smoke－Estimation of its contribution to respirable suspended particles－Determination of particulate matter by ultraviolet absorbance and by fluorescence
KS H ISO 15593-2009(2019) Environmental tobacco smoke－Estimation of its contribution to respirable suspended particles－Determination of particulate matter by ultraviolet absorbance and by fluorescence
KS P ISO 17190-11:2021 Urine-absorbing aids for incontinence — Test materials — Part 11: Determination of content of respirable particles
KS I ISO 9855:2005 Ambient air－Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
KS P ISO 17190-11:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 11：Determination of content of respirable particles
KS I ISO 12884-2008(2018) Ambient air-Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons — Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
KS I 4016-2019 Test methods for remanufactured particle sensor of air purifier
KS I ISO 9855-2005(2020) Ambient air－Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
KS I ISO 10473:2010 Ambient air－Measurement of the mass of particulate matter on a filter medium－Beta-ray absorption method
KS H ISO 18144:2009 Environmental tobacco smoke－Estimation of its contribution to respirable suspended particles－Method based on solanesol
KS H ISO 17175:2019 Bidis — Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine.
KS I ISO 13138:2020 Air quality — Sampling conventions for airborne particle deposition in the human respiratory system
KS I ISO 10473:2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
KS H ISO 4387:2017 Cigarettes－Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
KS H ISO 4387:2020 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
KS I ISO 16000-13-2009(2019) Determination of total(gas and particle-phase) polychlorinated dioxin-like biphenyls(PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans(PCDDs/PCDFs)－Collection on sorbent-backed filters
KS B ISO 11171:2008 Hydraulic fluid power-Calibration of automatic particle counters for liquids
KS B ISO 11171-2017(2022) Hydraulic fluid power－Calibration of automatic particle counters for liquids
KS B ISO 11171:2015 Hydraulic fluid power－Calibration of automatic particle counters for liquids
KS B ISO 11171:2017 Hydraulic fluid power－Calibration of automatic particle counters for liquids
KS P ISO 17190-11-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 11：Determination of content of respirable particles
KS L 1618-1-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test methods of properties of ceramic granules-Part 1:Size distribution of granules
KS I ISO 8518:2006 Workplace air－Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
KS F 2533-2017(2022) Methods of test for particle density and water absorption of light weight coarse aggregates for structural concrete
KS F 2529-2017(2022) Methods of test for particle density and water absorption of light weight fine aggregates for structural concrete
KS F 2529-2017 Methods of test for particle density and water absorption of light weight fine aggregates for structural concrete
KS F 2533-2017 Methods of test for particle density and water absorption of light weight coarse aggregates for structural concrete
KS H ISO 15592-3-2013(2018) Fine-cut tobacco and smoking articles made from it－Methods of sampling, conditioning and analysis－Part 3：Determination of total particulate matter of smoking articles using a routine analytical smokin
KS I ISO 11174:2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
KS I ISO 8518-2006(2017) Workplace air－Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
KS B ISO 29463-2:2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics
KS H ISO 18144-2009(2019) Environmental tobacco smoke－Estimation of its contribution to respirable suspended particles－Method based on solanesol

International Organization for Standardization (ISO), Particle Adsorber

ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 12884:2000 Ambient air - Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
ISO 9855:1993 Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method
ISO 17190-11:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 11: Determination of content of respirable particles
ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
ISO 18144:2003 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol
ISO 6783:1982 Coarse aggregates for concrete; Determination of particle density and water absorption; Hydrostatic balance method
ISO 20779:2018 Cigarettes — Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime
ISO/DIS 10882-1 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles
ISO 11171:2010 Hydraulic fluid power - Calibration of automatic particle counters for liquids
ISO 11171:1999 Hydraulic fluid power - Calibration of automatic particle counters for liquids
ISO 11171:2020 Hydraulic fluid power - Calibration of automatic particle counters for liquids
ISO 11171:2016 Hydraulic fluid power - Calibration of automatic particle counters for liquids
ISO 11171:2022 Hydraulic fluid power — Calibration of automatic particle counters for liquids
ISO 20779:2018/Amd 1:2019 Cigarettes — Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime — Amendment 1
ISO 8518:2001 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO/CD 8417 Risk management of particulate contamination for devices with intravascular access
ISO 4387:1991 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
ISO 4387:2019 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
ISO/TS 21220:2009 Particulate air filters for general ventilation - Determination of filtration performance
ISO 17175:2017 Bidis - Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
ISO 10882-1:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles

British Standards Institution (BSI), Particle Adsorber

BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
BS EN 12083:1998 Respiratory protective devices - Filters with breathing hoses, (non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
BS EN 1827:1999+A1:2009 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
BS EN 1827:1999 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
BS ISO 4387:2000+A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS EN 149:2001+A1:2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
BS ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
BS ISO 4387:2019 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS ISO 4387:2000+A2:2017 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS ISO 17175:2017 Bidis. Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
BS EN 13274-7:2019 Tracked Changes. Respiratory protective devices. Methods of test. Determination of particle filter penetration
BS ISO 16900-3:2012 Respiratory protective devices. Methods of test and test equipment - Determination of particle filter penetration
17/30337552 DC BS ISO 17175. Bidis. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
BS ISO 27891:2015 Aerosol particle number concentration. Calibration of condensation particle counters
BS EN 405+A1:2002 Respiratory protective devices. Valved filtering half masks to protect against gases or gases and particles. Requirements, testing, marking
BS EN 405:2001+A1:2009 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS ISO 20779:2018+A1:2019 Cigarettes. Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime
BS ISO 9912-4:2018 Agricultural irrigation equipment. Filters for microirrigation. Granulated media filters
BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Determination of particle density and water absorption
BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
BS EN 149:2001 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids - Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)
20/30375380 DC BS EN ISO 23343-1. Solid biofuels. Determination of water sorption and its effect on durability of thermally treated biomass fuels. Part 1. Pellets
BS EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air. Aerosol production, measuring equipment and particle-counting statistics
23/30441434 DC BS EN ISO 10882-1. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone - Part 1. Sampling of airborne particles
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method
BS EN 779:2002 Particulate air filters for general ventilation. Determination of the filtration performance
BS EN 779:2012 Particulate air filters for general ventilation. Determination of the filtration performance
BS EN 1097-6:2022 Tracked Changes. Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
BS EN 15805:2021 Particulate air filters for general ventilation. Standardised dimensions
BS ISO 18562-2:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter
BS ISO 11174:2023 Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method
BS EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter

Association Francaise de Normalisation, Particle Adsorber

NF ISO 16000-13:2009 Air intérieur - Partie 13 : dosage des polychlorobiphényles (PCB) de type dioxine et des polychlorodibenzo- p-dioxines (PCDD)/polychlorodibenzofuranes (PCDF)totaux (en phase gazeuse et en phase particulaire) - Collecte sur des filtres adsorbants
NF EN 143:2021 Appareils de protection respiratoire - Filtres à particules - Exigences, essais, marquage
NF EN 1827/IN1:2009 Appareils de protection respiratoire - Demi-masques sans soupape inspiratoire et avec filtres démontables, contre les gaz, contre les gaz et les particules, ou contre les particules uniquement - Exigences, essais, marquage
NF EN 1827+A1:2009 Appareils de protection respiratoire - Demi-masques sans soupape inspiratoire et avec filtres démontables, contre les gaz, contre les gaz et les particules, ou contre les particules uniquement - Exigences, essais, marquage
NF V37-044*NF ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence.
NF V37-001*NF ISO 4387:2020 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
FD ISO 8518:2002 Air des lieux de travail - Dosage du plomb particulaire et des composés particulaires du plomb - Méthode par spectrométrie d'absorption atomique dans la flamme ou méthode par spectrométrie d'absorption avec atomisation électrothermique
NF ISO 11500:2023 Transmissions hydrauliques - Détermination du niveau de pollution particulaire d'un échantillon liquide par comptage automatique des particules par absorption de lumière
NF ISO 4387:2020 Cigarettes - Détermination de la teneur en matière particulaire totale et en matière particulaire anhydre et exempte de nicotine au moyen d'une machine à fumer analytique de routine
NF S76-007-7*NF EN 13274-7:2019 Respiratory protective devices - Methods of test - Part 7 : determination of particle filter penetration
FD ISO/TR 27628:2007 Air des lieux de travail - Particules ultrafines, nanoparticules et aérosols nanostructurés - Caractérisation et évaluation de l'exposition par inhalation
NF EN 13274-7:2019 Appareils de protection respiratoire - Méthodes d'essai - Partie 7 : détermination de la pénétration des filtres à particules
NF ISO 6344-2:2022 Abrasifs appliqués - Détermination et désignation de la distribution granulométrique - Partie 2 : macrograins P12 à P220
NF S76-014*NF EN 149+A1:2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking.
NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF EN 12083:1998 Appareils de protection respiratoire - Filtres avec tuyaux respiratoires, filtres à particules, filtres antigaz et filtres combinés (filtres non montés sur un masque) - Exigences, essais, marquage.
NF X34-243-1*NF EN ISO 23343-1:2021 Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1 : pellets
NF EN ISO 23343-1:2021 Biocombustibles solides - Détermination de la sorption d'eau et de son influence sur la durabilité des combustibles de biomasse traités thermiquement - Partie 1 : granulés
NF EN ISO 13138:2012 Qualité de l'air - Conventions de prélèvement de particules aéroportées en fonction de leur dépôt dans les voies respiratoires humaines
NF EN ISO 10882-1:2011 Hygiène et sécurité en soudage et techniques connexes - Échantillonnage des particules en suspension et des gaz dans la zone respiratoire des opérateurs - Partie 1 : échantillonnage des particules en suspension
NF S76-016*NF EN 405+A1:2009 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking.
NF S76-016/IN1*NF EN 405/IN1:2009 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
NF EN 149/IN1:2009 Appareils de protection respiratoire - Demi-masques filtrants contre les particules - Exigences, essais, marquage
NF EN 149+A1:2009 Appareils de protection respiratoire - Demi-masques filtrants contre les particules - Exigences, essais, marquage
NF V37-209*NF ISO 20779:2018 Cigarettes - Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime
NF ISO 20779:2018 Cigarettes - Génération et collecte de la matière particulaire totale au moyen d'une machine à fumer analytique de routine avec un régime de fumage intense
NF ISO 16900-3:2013 Appareils de protection respiratoire - Méthodes d'essai et équipement d'essai - Partie 3 : détermination de la pénétration d'un filtre à particules
NF ISO 10473:2000 Air ambiant - Mesurage de la masse des matières particulaires sur un milieu filtrant - Méthode par absorption de rayons bêta
NF E48-663:2011 Hydraulic fluid power - Calibration of automatic particle counters for liquids.
NF E48-663:2021 Hydraulic fluid power - Calibration of automatic particle counters for liquids
NF EN ISO 29463-2:2018 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 2 : production d'aérosol, équipement de mesure et statistique de comptage de particules
NF X11-683:1981
NF X43-040*NF ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
NF P84-120*NF EN 12039:2016 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
NF ISO 12500-3:2009 Filtres pour air comprimé - Méthodes d'essai - Partie 3 : particules
NF S76-014/IN1*NF EN 149/IN1:2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking.
NF X43-026:1990 Air quality. Ambient air. Determination of lead in airborne particulate. Atomic absorption spectrometry.
NF X43-274-5*NF EN 17199-5:2019 Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 5 : vortex shaker method
NF ISO 20779/A1:2020 Cigarettes - Génération et collecte de la matière particulaire totale au moyen d'une machine à fumer analytique de routine avec un régime de fumage intense - Amendement 1
NF P18-650-6:2014 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
NF P18-650-6*NF EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
NF EN ISO 10808:2011 Nanotechnologies - Caractérisation des nanoparticules dans les chambres d'inhalation par exposition pour les essais de toxicité par inhalation
NF X44-014-2*NF EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2 : aerosol production, measuring equipment and particle-counting statistics

Group Standards of the People's Republic of China, Particle Adsorber

T/CECA 78-2022 Porous sound-absorbing particles for microspeakers
T/CAEPI 62-2023 Technical requirement for solvent recovery unit by granular activated carbon adsorption - nitrogen desorption
T/CAEPI 61-2023 Technical requirements for solvent recovery unit by granular activated carbon adsorption - steam desorption
T/CPCIF 0132-2021 Technical specification for granular activated carbon adsorption treatment of organic dye wastewater
T/CASME 77-2022 Laser particle sensor
T/CAMS CICEIA39-2020 Diesel engine particulate matter sensor
T/HFJX 2048-2020 Diesel Particulate Electric Filter (DPEF)
T/SAEPI 011-2022 Particle filter for air cleaner
T/CICEIA /CAMS3-2020 Diesel engine - Diesel particulate filter (DPF) cleaning device
T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
T/CAQI 35-2017 Graduation for particle purifying performance of fresh air type air cleaner
T/CAQI 17-2016 Graduation for particle purifying performance of filter-type air cleaner
T/CSBME 057-2022 Adsorption resin for hemoperfusion or plasma perfusion devices
T/CICEIA /CAMS24-2021 Diesel engine-Particulate filter-Product quality grading specification
T/GDBX 009-2019 Non-precious metal catalytic diesel engine exhaust particulate filter

Japanese Industrial Standards Committee (JISC), Particle Adsorber

JIS T 8157:2018 Powered air purifying respirator for particulate matter
JIS Z 8845:2021 Determination of particle adhesion force by centrifugal method
JIS T 8160:1992 Dust respirators for fine particles
JIS B 7954:2001 Automatic monitors for suspended particulate matter in ambient air
JIS B 7954:1988 Automatic moniters for suspended particulate matter in ambient air
JIS B 9932:2000 Hydraulic fluid power -- Calibration of liquid automatic particle counters
JIS A 1135:1999 Methods of test for particle density and water absorption of light weight coarse aggregates for structural concrete
JIS A 1134:1999 Methods of test for particle density and water absorption of light weight fine aggregates for structural concrete
JIS A 1134:2006 Methods of test for particle density and water absorption of lightweight fine aggregates for structural concrete
JIS A 1135:2006 Methods of test for particle density and water absorption of lightweight coarse aggregates for structural concrete
JIS A 1134 AMD 1:2022 Methods of test for particle density and water absorption of lightweight fine aggregates for structural concrete (Amendment 1)
JIS B 9932:2003 Hydraulic fluid power -- Calibration of automatic particle counters for liquids
JIS B 9932:2015 Hydraulic fluid power -- Calibration of automatic particle counters for liquids

Professional Standard - Agriculture, Particle Adsorber

1728药典一部-2010 Appendix IC Granules
GB 3635-1983 Method for determination of crushing strength of fertilizer catalyst, molecular sieve and adsorbent particles
2285药典二部-2010 Appendix Ⅰ General Rules for Preparations N Granules
149药典三部-2010 Appendix Ⅰ General Rules for Preparations ⅠJ Granules
762兽药典一部-2015 Appendix Contents 0100 Preparation General Rules 0110 Granules
757兽药典二部-2015 Appendix Contents 0100 Preparations General Rules 0106 Granules
SB/T 10125-1992 Vertical Cascade Pellet Cooler
1386药典一部-2020 Prescription preparation and single preparation Qihuafu Guigutong Granules
1340药典一部-2015 Prescription preparation and single preparation Qihuafu Guigutong Granules
2367药典二部-2010 Appendix Ⅹ H Determination of droplet (particle) distribution of inhalation aerosol, inhalation powder aerosol and inhalation spray

Defense Logistics Agency, Particle Adsorber

DLA A-A-1281 A VALID NOTICE 2-2008 Sorbent, of (Particulate)
DLA A-A-1281 A VALID NOTICE 1-2003 SORBENT, OIL (PARTICULATE)
DLA A-A-1281 A-1989 SORBENT, OIL (PARTICULATE)

European Committee for Standardization (CEN), Particle Adsorber

EN 12083:1998 Respiratory protective devices - Filters with breathing hoses (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
EN 149:1991 Respiratory protective devices; filtering half masks to protect against particles; requirements, testing, marking
EN 12039:2016 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
EN 149:2001+A1:2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
prEN ISO 10882-1 rev Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
EN 779:2002 Particulate air filters for general ventilation - Determination of the filtration performance
EN 779:1993 Particulate Air Filters for General Ventilation - Requirements, Testing, Marking
EN ISO 10882-1:2001 Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator磗 Breathing Zone - Part 1: Sampling of Airborne Particles ISO 10882-1:2001
FprEN 1097-6-2021 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 12039:2016/AC:2017 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption

German Institute for Standardization, Particle Adsorber

DIN 66135-3:2001 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN 66135-2:2001 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
DIN EN 143:2021-07 Respiratory protective devices - Particle filters - Requirements, testing, marking; German version EN 143:2021
DIN 66135-1:2001 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
DIN ISO 12884:2000 Ambient air - Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analysis (ISO 12884:2000)
DIN 66135-1:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
DIN 58920:2000 Filter elements - Particle filtration in fluids - Characterisation of the particle retention
DIN 66135-2:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
DIN 66135-3:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 3: Determination of the micropore volume according to Dubini and Radushkevich
DIN ISO 4387:2021-03 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine (ISO 4387:2019)
DIN EN 1827:2009-11 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking; German version EN 1827:1999+A1:2009
DIN EN 13274-7:2019 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
DIN EN 13274-7:2008 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration; English version of DIN EN 13274-7:2008-04
DIN EN 549:2019-09 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration; German version EN 13274-7:2019
DIN EN 13274-7:2019-09 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration; German version EN 13274-7:2019
DIN 50452-2:2009-10 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 2: Determination of particles by optical particle counters
DIN EN 12083:1998-06 Respiratory protective devices - Filters with breathing (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking; German version EN 12083:1998
DIN EN 12083:1998 Respiratory protective devices - Filters with breathing (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking; German version EN 12083:1998
DIN EN ISO 10808:2011-04 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010); German version EN ISO 10808:2010
DIN EN ISO 23343-1:2021-08 Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1: Pellets (ISO 23343-1:2021); German version EN ISO 23343-1:2021
DIN ISO 12884:2000-12 Ambient air - Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analysis (ISO 12884:2000)
DIN EN 149:2009-08 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking; German version EN 149:2001+A1:2009
DIN EN ISO 13138:2012-04 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012); German version EN ISO 13138:2012
DIN 54401:2016-05 Testing of ion exchangers, adsorber resins and hybridadsorbers - Sampling
DIN ISO 10473:2002-08 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
DIN EN ISO 10882-1:2012-01 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011); German version EN ISO 10882-1:2011
DIN EN ISO 10882-1:2023-06 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023); German and English version prEN ISO 10882-1:2023 / Note: Dat...
DIN 58621:2011-10 Respiratory protective devices - Reactorfilters for protection against radioactive Methyliodide and radioactive particles - Requirements, testing, marking
DIN 19633:2013-03 Ion exchanger, adsorption resins and hybrid adsorber for water treatment - Technical delivery conditions
DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN EN 149:2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking (includes Amendment A1:2009); English version of DIN EN 149:2009-08
DIN EN 12039:2017-05 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules; German version EN 12039:2016 + AC:2017
DIN EN 15805:2022-06 Particulate air filters for general ventilation - Standardised dimensions; German version EN 15805:2021
DIN EN 17745:2022-11 Agricultural and forestry machinery - Environmental requirements for granule applicator of Plant Protection Products; German and English version prEN 17745:2022 / Note: Date of issue 2022-10-21
DIN EN ISO 23343-1:2020 Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1: Pellets (ISO/DIS 23343-1:2020); German and English version prEN ISO 23343-1:2020
DIN EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
DIN EN 1097-6:2022-05 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2022
DIN EN 1097-6:2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005
DIN EN 1097-6:2020 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German and English version prEN 1097-6:2020
DIN EN ISO 29463-2:2019-05 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011); German version EN ISO 29463-2:2018
DIN 19569-8:2005-06 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 8: Specific principles for the equipment for sewage treatment in granular media filter and granular fixed bed filter
DIN ISO 10473:2002 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)

ES-UNE, Particle Adsorber

UNE-EN 143:2022 Respiratory protective devices - Particle filters - Requirements, testing, marking
UNE-ISO 4387:2008/Amd 2:2018 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE-ISO 4387:2008/Amd.1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE-EN 13274-7:2020 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
UNE-EN 12083/AC:2000 Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
UNE-EN ISO 10808:2010 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010) (Endorsed by AENOR in February of 2011.)
UNE-EN ISO 23343-1:2021 Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1: Pellets (ISO 23343-1:2021)
UNE-EN 15805:2022 Particulate air filters for general ventilation - Standardised dimensions
UNE-EN ISO 29463-2:2019 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)

Danish Standards Foundation, Particle Adsorber

DS/EN 143:2021 Respiratory protective devices – Particle filters – Requirements, testing, marking
DS/ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
DS/ISO 4387/Amd. 1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
DS/ISO 4387:2000 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
DS/EN 1827+A1:2009 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
DS/EN 13274-7:2008 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
DS 406.2:1987 Lightweight aggregates for concrete. Determination of grain density and water absorption
DS/EN 12083/AC:2000 Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
DS/EN 12083:1998 Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
DS/ISO 23343-1:2021 Solid biofuels – Determination of water sorption and its effect on durability of thermally treated biomass fuels – Part 1: Pellets
DS/EN 149+A1:2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
DS/EN ISO 10882-1:2011 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
DS/EN ISO 23343-1:2021 Solid biofuels – Determination of water sorption and its effect on durability of thermally treated biomass fuels – Part 1: Pellets (ISO 23343-1:2021)
DS/EN 12039:2000 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
DS/EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
DS/EN 779:1993 Particulate air filters for general ventilation. Requirements, testing, marking
DS/ISO 17190-11:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 11: Determination of content of respirable particles
DS/EN ISO 10801:2011 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method

American Society for Testing and Materials (ASTM), Particle Adsorber

ASTM D8208-19 Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM E550-87(2002) Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
ASTM E2864-13 Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D5955-02(2007) Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
ASTM D5955-02 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
ASTM D5955-02(2012)e1 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
ASTM E1520-99 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM E1520-99(2004) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM E1520-99(2015) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM D6209-21 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM E1509-95(2000) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM F327-08(2022) Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
ASTM D4977/D4977M-03(2019) Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM D4977/D4977M-20 Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion
ASTM D7619-22 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM E1509-04 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E550-87(2008) Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
ASTM E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E3238-20 Standard Test Method for Quantitative Measurement of the Chemoattractant Capacity of a Nanoparticulate Material in vitro
ASTM E1509-12(2017) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM F3407-20 Standard Test Method for Respirator Fit Capability for Negative-Pressure Half-Facepiece Particulate Respirators
ASTM F3407-21 Standard Test Method for Respirator Fit Capability for Negative-Pressure Half-Facepiece Particulate Respirators
ASTM D6209-98(2012) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
ASTM D6209-13 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
ASTM D3268-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM D3268-91(2018) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
ASTM D6271-10 Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol

TH-TISI, Particle Adsorber

TIS 2199-2004 Respiratory protective devices: particulate air purifying
TIS 1743-1999 Coarse aggregates for concrete.determination of particle density and water absorption.hydrostatic balance method

YU-JUS, Particle Adsorber

JUS B.B8.031-1982 Crushed aggregate. Determination of particle density and water absorption
JUS Z.B1.008-1984 Self protection equipment. Filter for respiratory protective from particuls. Technical requirements and testing
JUS Z.B1.001-1984 Individual protective equipments. Protection of the respiratory system. Protective mask for removing of particle. Tehnical requirements

GM Europe, Particle Adsorber

GME TM 944100-2005 Partikelschaum Particle Foam English/German; Includes Appendix A

Association of German Mechanical Engineers, Particle Adsorber

VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry
VDI 3679 Blatt 1-1998 Wet separators for particle collection
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 2267 Blatt 8-2000 Determination of suspended particles in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic absorption spectrometry (AAS) with cold vapour technique
VDI 3491 Blatt 7-1987 Particulate matter measurement; generation of test aerosols; Rapaport-Weinstock generator
VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
VDI 3491 Blatt 6-1980 Particulate matter measurement; generation of test aerosols; platinum oxide generator
VDI 3679 Blatt 1-2014 Wet separators - Fundamentals, waste gas cleaning of particle collections
VDI 2267 Blatt 9-2002 Determination of suspended particulates matter in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic fluorescense spectrometry (AFS) with cold vapour technique
VDI 3491 Blatt 3-1980 Particulate matter measurement; generation of latex aerosols using nozzle atomizers
VDI 3491 Blatt 12-1990 Particulate matter measurement; generation of test aerosols using centrifugal atomizers
VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)

CZ-CSN, Particle Adsorber

CSN 65 4134-1982 Rast remover
CSN 65 6220-1984 Oils. Determination of particulate contaminant on membrane filter

KR-KS, Particle Adsorber

KS P ISO 17190-11-2021 Urine-absorbing aids for incontinence — Test materials — Part 11: Determination of content of respirable particles
KS H ISO 17175-2019 Bidis — Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine.
KS I ISO 13138-2020 Air quality — Sampling conventions for airborne particle deposition in the human respiratory system
KS I ISO 10473-2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
KS H ISO 4387-2020 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
KS I ISO 11174-2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
KS B ISO 29463-2-2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics

Professional Standard - Petroleum, Particle Adsorber

SY/T 5917-1994 Large particle sidewall corer

Indonesia Standards, Particle Adsorber

中华人民共和国国家卫生和计划生育委员会, Particle Adsorber

GB/T 17095-1997 Hygienic standard for inhalable particulate matter in indoor air
WS/T 206-2001 Method for determination of inhalabnle particulate matter (PM10) in air of public place----Light scattering method

AENOR, Particle Adsorber

UNE-ISO 15593:2010 Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence
UNE-ISO 4387:2008 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE-ISO 4387:2008/A1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
UNE-EN 1827:1999+A1:2010 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
UNE 77250:2001 Ambient air. Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectometric analyses.
UNE-EN 12083:1998 Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
UNE 77230:1998 AMBIENT AIR. DETERMIANTION OF THE PARTICULATE LEAD CONTENT OF AEROSOLS COLLECTED ON FILTERS. ATOMIC ABSORPTION SPECTROMETRIC METHOD.
UNE-EN 149:2001+A1:2010 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
UNE 81599:2014 Workplace exposure. Determination of airborne particles (inhalable, thoracic and respirable fractions). Gravimetric method.
UNE-ISO 10473:2005 Ambient air -- Measurement of the mass of particulate matter on a filter medium -- Beta-ray absorption method
UNE-EN 12039:2017 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
UNE-EN ISO 10882-1:2012 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)

Lithuanian Standards Office , Particle Adsorber

LST ISO 4387:2000 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
LST EN 1827-2001+A1-2009 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
LST EN 13274-7-2008 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
LST ISO 12884:2001 Ambient air. Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons. Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
LST EN 12083+AC-2001 Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
LST ISO 4387:2000/A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine - AMENDMENT 1 (ISO 4387:2000/Amd.1:2008, identical)
LST EN 149-2002+A1-2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
LST ISO 10473:2001 Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method
LST EN ISO 23343-1:2021 Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1: Pellets (ISO 23343-1:2021)
LST EN 12039-2001 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
LST ISO 9855:2003 Ambient air. Determination of the particulate lead content of aerosols collected on filters. Atomic absorption spectrometric method (idt ISO 9855:1993)
LST EN 1097-6+AC-2003 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
LST EN 1097-6+AC-2003/A1-2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
LST EN ISO 10882-1:2012 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
LST EN 1097-6-2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption

Professional Standard - Machinery, Particle Adsorber

JB/T 11254-2011 Vertical post-cooker for pellet feed
JB/T 11177-2011 Electric control(cabinet) for adsorption dryer
JB/T 12653-2016 Diesel engines.Technical specifications of particle oxidation catalytic converter (POC)
JB/T 10532-2017 Adsorption compressed air dryers for general use
JB/T 10532-2005 Adsorption compressed air dryers for general use

Professional Standard - Grain, Particle Adsorber

LS/T 3612-1992 Vertical Cascade Pellet Cooler

工业和信息化部/国家能源局, Particle Adsorber

JB/T 13202.3-2017 Diesel engine particle capture system Part 3: Particle sensor technical conditions
JB/T 13202.4-2017 Diesel engine particle capture system Part 4: Particle trap technical conditions
JB/T 12777-2016 Flip plate pellet feed cooler

VN-TCVN, Particle Adsorber

TCVN 6152-1996 Ambient air.Determination of the particulate lead content of aerosols collected on filters.Atomic absorption spectrometric method

未注明发布机构, Particle Adsorber

DIN EN 143:2000 Respiratory protective devices — Particle filters — Requirements, testing, marking; German version EN 143:2000
DIN EN 149:2001 Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking
DIN EN 1822-2:1998 High efficiency particulate air filters (HEPA and ULPA) — Part 2: Aerosol production, measuring equipment, particle counting statistics
BS EN 146:1992(1999) Respiratory protective devices Specification for powered particle filtering devices incorporating helmets or hoods
BS 5540-6:1990(2011) Evaluating particulate contamination of hydraulic fluids — Part 6 : Method of calibrating liquid automatic particle - count instruments (using mono - sized latex spheres)
DIN EN 1097-6:2001 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
STANAG 1411 NORME DE QUANTIFICATION DES CARACT?RISTIQUES DES ABSORBANTS GRANULAIRES DE DIOXYDE DE CARBONE (CO2) UTILIS?S DANS DES APPLICATIONS DE PLONG?E ET HYPERBARES (ED 3; To obtain please contact your national Defense Standardization Office or the NATO Standardiz
BS ISO 18144:2003(2009) Environmental tobacco smoke — Estimation of its contribution to respirable suspended particles — Method based on solanesol

Professional Standard - Energy, Particle Adsorber

NB/T 34026-2015 Biomass pellets burners

Professional Standard - Electricity, Particle Adsorber

DL/T 1096-2008 Limited value of particulate pollutant of transformer oils
DL/T 1096-2018 Limited value of particulate pollutant of transformer oils

US-FCR, Particle Adsorber

FCR UFGS-23 51 43.02 20-2006 ELECTROSTATIC DUST COLLECTOR OF FLUE GAS PARTICULATES
FCR UFGS-23 51 43.01 20-2006 MECHANICAL CYCLONE DUST COLLECTOR OF FLUE GAS PARTICULATES

Hebei Provincial Standard of the People's Republic of China, Particle Adsorber

DB13/T 2080-2014 Biomass Pellet Fuel Burner

CEN - European Committee for Standardization, Particle Adsorber

PREN 13274-7-2018 Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
EN 12039:1999 Flexible Sheets for Waterproofing - Bitumen Sheets for Roof Waterproofing - Determination of Adhesion of Granules
EN 17199-5:2019 Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 5: Vortex shaker method
PREN 16510-2-6-2014 Residential solid fuel burning appliances - Part 2-6 Appliances fired by wood pellets

National Metrological Verification Regulations of the People's Republic of China, Particle Adsorber

JJG 1061-2010 Verification Regulation of Liquid-borne Particle Counters
JJG 943-1998 Verification Regulation of Total Suspended Particulate Sampler
JJG 943-2011 Verification Regulation of Total Suspended Particulates Sampler

Underwriters Laboratories (UL), Particle Adsorber

UL 586-2009 UL Standard for Safety High-Efficiency@ Particulate@ Air Filter Units (Ninth Edition; Reprint with revisions through and including December 19@ 2017)

Gansu Provincial Standard of the People's Republic of China, Particle Adsorber

DB62/T 4391-2021 Determination of Exhaust Gas Particulates from Stationary Pollution Sources β-ray Absorption Method

U.S. Military Regulations and Norms, Particle Adsorber

ARMY MIL-PRF-32016 A-2002 CELL, GAS PHASE, ADSORBER
ARMY MIL-F-51536 (1) CONT. DIST.-1992 FILTER UNIT, GAS-PARTICULATE, 200 CFM, 208V, 400 HZ, M56
ARMY MIL-F-51536-1988 FILTER UNIT, GAS-PARTICULATE, 200 CFM, 208V, 400 HZ, M56
ARMY MIL-F-51539 A VALID NOTICE 2-2004 FILTER UNIT, GAS-PARTICULATE: 400 CFM, 208 V, 400 HZ, M59
ARMY MIL-F-51539 A NOTICE 1-1995 FILTER UNIT, GAS-PARTICULATE: 400 CFM, 208 V, 400 HZ, M59
ARMY MIL-F-51539 A (1)-1992 FILTER UNIT, GAS-PARTICULATE: 400 CFM, 208 V, 400 HZ, M59
ARMY MIL-F-51539 A-1990 FILTER UNIT, GAS-PARTICULATE: 400 CFM, 208 V, 400 HZ, M59

Professional Standard-Ships, Particle Adsorber

CB 967-1980 HL type submarine absorber

Anhui Provincial Standard of the People's Republic of China, Particle Adsorber

DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

Professional Standard - Water Conservancy, Particle Adsorber

SL/T 208-1998 Instrument for sediment measurement and particle size analysis in open channel

ZA-SANS, Particle Adsorber

SANS 275:2004 Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
SANS 584:2008 Soda-lime granules (with indicator) for use during anaesthesia for carbon dioxide absorption

Military Standard of the People's Republic of China-General Armament Department, Particle Adsorber

GJB 380.4-1987 Aircraft hydraulic system contamination test uses automatic particle counter to determine oil solid particle contamination degree
GJB 380.3-1987 Aircraft Hydraulic System Contamination Testing Automatic Particle Counter Calibration

PL-PKN, Particle Adsorber

PN Z02010-15-1987 Individual respiratory protective equipment used in air environment Methods of testing Method for sodium chloride particulate test for respirator filters
PN P50172-1989 Paper products Determination number conducting particles at condenser tissue paper
PN-EN ISO 23343-1-2021-10 E Solid biofuels -- Determination of water sorption and its effect on durability of thermally treated biomass fuels -- Part 1: Pellets (ISO 23343-1:2021)
PN Z04097 Arkusz 04-1974 Air purity protection Tests for size composition of dust Determination of weight particie size of dust with the aid of sedimentation pipette

HU-MSZT, Particle Adsorber

MNOSZ 14980-1952

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Particle Adsorber

ASHRAE SYSTEMS AND EQUIP IP CH 29-2012 AIR CLEANERS FOR PARTICULATE CONTAMINANTS

Professional Standard - Aviation, Particle Adsorber

HB 5931.4-1986 Determination of Solid Particle Contamination Degree of Working Fluid Using Automatic Particle Counter for Contamination Test of Aircraft Hydraulic System
HB 5931.3-1986 Aircraft Hydraulic System Contamination Testing Automatic Particle Counter Calibration

SE-SIS, Particle Adsorber

SIS SS-EN 149-1991 Respiratory protective devices — Filtering half masks to protect against particles — Requirements, testing, marking

Professional Standard - Meteorology, Particle Adsorber

QX/T 271-2015 Interval of maintenance and intercomparison for Aethalometer based on optical attenuation method

Standard Association of Australia （SAA）, Particle Adsorber

AS 1141.5:2000 Methods for sampling and testing aggregates - Particle density and water absorption of fine aggregate
AS ISO 16900.3:2015 Respiratory protective devices — Methods of test and test equipment, Part 3: Determination of particle filter penetration
AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
AS 3853.1:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of airborne particles
AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS 1141.6.1:2000 Methods for sampling and testing aggregates - Particle density and water absorption of coarse aggregate - Weighing-in-water method

BR-ABNT, Particle Adsorber

ABNT MB-29-1969

National Metrological Technical Specifications of the People's Republic of China, Particle Adsorber

JJF 1736-2018 Program of Pattern Evaluation of Total Suspended Particulates Samplers

Society of Automotive Engineers (SAE), Particle Adsorber

SAE J2943-2022 Recommended Practice for Filter Weighing of Particulate Matter Emissions

AT-ON, Particle Adsorber

ONORM EN 149-1991 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
OENORM EN ISO 23343-1:2021 Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1: Pellets (ISO 23343-1:2021)

工业和信息化部, Particle Adsorber

JC/T 2396-2017 Wall flow honeycomb ceramics for diesel particulate traps

GB-REG, Particle Adsorber

REG NASA-LLIS-0009-1991 Lessons Learned - Lubricant Particles Clogging Spacecraft System Filters

CH-SNV, Particle Adsorber

SN EN ISO 23343-1:2021 Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1: Pellets (ISO 23343-1:2021)

IT-UNI, Particle Adsorber

UNI 4872-1961

Professional Standard - Ocean, Particle Adsorber

HY/T 133-2010 Determination of spectral absorption coefficient of particles and dissolved material for seawater-Spectrophotometry

Professional Standard - Light Industry, Particle Adsorber

QB/T 4980-2016 Technical requirements of special accessories for vacuum cleaner

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Particle Adsorber

GB/T 30475.3-2017 Filters for compressed air—Test methods—Part 3: Particulates
GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces

BE-NBN, Particle Adsorber

NBN EN 779-1993 Particulate air filters for general ventilation - Requirements, testing, marking

Professional Standard - Environmental Protection, Particle Adsorber

HJ/T 374-2007 Technical requirement and test procedures for total suspended particulates sampler

NL-NEN, Particle Adsorber

NEN-EN 779-1994 Particulate air filters for general ventilation. Requirements, testing, marking

API - American Petroleum Institute, Particle Adsorber

API PUBL 4365-1983 Characterization of Particulate Emissions from Refinery Process Heaters and Boilers

Professional Standard - Medicine, Particle Adsorber

YY 1290-2016 Disposable Bilirubin Plasmasorber

NZ-SNZ, Particle Adsorber

AS/NZS 4886:2007 Domestic solid fuel burning appliance- Pellet heaters-Determination of flue gas emission

American National Standards Institute （ANSI), Particle Adsorber

ANSI/ASTM F658:2000 Practice for Defining Size, Calibration, Resolution, and Counting Accuracy of Liquid-Borne Particle Counter Using Near-Monodisperse Spherical Particulate Material