ZH
RU
ES

time ultrasonic probe

time ultrasonic probe, Total:381 items.

In the international standard classification, time ultrasonic probe involves: Pipeline components and pipelines, Testing of metals, Medical equipment, Welding, brazing and soldering, Non-destructive testing, Shipbuilding and marine structures in general, Iron and steel products, Equipment for railway/cableway construction and maintenance, Acoustics and acoustic measurements, Insulation, Ground service and maintenance equipment, Railway engineering in general, Fluid storage devices, Compressors and pneumatic machines, Gas and steam turbines. Steam engines, Non-ferrous metals, Springs, Air quality, Rails and railway components, Protection against crime, Geology. Meteorology. Hydrology, Measurement of fluid flow, Metrology and measurement in general, Power stations in general, Electromechanical components for electronic and telecommunications equipment, Alarm and warning systems, Fasteners, Nuclear energy engineering.

Professional Standard - Railway, time ultrasonic probe

TB/T 2634-1995 Specifications for Ultrasonic Flaw Detection Probes for Rails
TB/T 2340-2012 Rail Ultrasonic Flaw Detector
TB/T 1558-1984 Ultrasonic testing of butt welds
TB/T 1606-1985 Ultrasonic Flaw Detection of Ductile Iron Crankshaft
TB/T 2327-1992 Ultrasonic Flaw Detection Method of High Manganese Steel Frog
TB/T 2494.2-1994 Rail Vehicle Axle Flaw Detection Method Ultrasonic Flaw Detection of In-service Axles
TB/T 2658.9-1995 Standard Rail Ultrasonic Flaw Detection Operation for Public Works
TB/T 2452.1-1993 Integral thin-walled ductile iron piston non-destructive testing ductile iron piston ultrasonic testing
TB/T 2047.3-2011 Technical specification for materials used for non-destructive testing in railway.Part 3:Probes for ultrosonic testing
TB/T 2494.2-2010 Inspecting method for axle of rail motor car Part 2:Ultrasonic inspection for in-service axle
TB/T 2658.21-2007 Maintenance performance Part 21: Ultrasonic testing of rail welds
TB/T 2494.1-1994 Ultrasonic Flaw Control of Newly Made Axle Axle by Rail Vehicle Axle Flaw Detection Method
TB/T 2340-2000 Technical conditions of multi-channel A-type display rail ultrasonic flaw detector
TB/T 1659-1985 Ultrasonic flaw detection of aluminum base alloy bimetallic bearing bush on steel back of diesel locomotive

Association Francaise de Normalisation, time ultrasonic probe

NF A09-322:1985 Non destructive testing - Ultrasonic testing - Specifications of ultrasonic probes for industrial use
NF A09-323:1987 Non-destructive testing - Ultrasonic testing - Methods for specifying ultrasonic probes for industrial use
NF A89-524:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD).
NF A09-016*NF ISO 12715:2014 Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams
NF A09-320-2/A1:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
NF A09-320-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
NF A09-326:1987 Non-destructive testing - Ultrasonic testing - Method of evaluation under working of ultrasonic beam characteristics of contact probe
NF EN ISO 6416:2017 Hydrométrie - Mesure du débit par la méthode du temps de transit ultrasonique (temps de vol)
NF EN 50724:2023 Détecteurs de fuites de gaz à ultrasons (DFGU) fixes - Exigences générales et méthodes d'essai
NF EN ISO 16811:2014 Essais non destructifs - Contrôle par ultrasons - Réglage de la sensibilité et de la base de temps
NF X10-334*NF EN ISO 6416:2017 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method
NF A09-341:1991 Non-destructive testing - Ultrasonic testing - Monitoring of equipment - Setting using control cards
NF A89-520:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels and assessment.
NF EN 3718:2013 Série aérospatiale - Méthode d'essai applicable aux matériaux métalliques - Contrôle par ultrasons des tubes
NF C97-908*NF EN 61266:1996 Ultrasonics. Hand-held probe doppler foetal heartbeat detectors. Performance requirements and methods of measurement and reporting.
NF A89-520/A1:2002 Non-destructive testing of welds - Ultrasonic testing of welded joints.
NF A89-520/A2:2004 Non-destructive testing of welds - Ultrasonic testing of welded joints.
NF A89-520:1997 Non destructive examination of welds. Ultrasonic examination of welded joints.
NF A09-340-6:2009 Non-destructive testing - Ultrasonic examination - Part 6 : time-of-flight diffraction technique as a method for detection and sizing of discontinuities.
NF A09-337*NF EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
NF A89-524*NF EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
NF A09-022-2:2014 Non destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2 : probes
NF A89-521/A1:2002 Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels.
NF A89-521/A2:2004 Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels.
NF A89-521:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels.
NF A89-521:1997 Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.
NF EN ISO 10863:2020 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Utilisation de la technique de diffraction des temps de vol (TOFD)
NF EN ISO 17640:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Techniques, niveaux d'essai et évaluation
NF EN ISO 19285:2017 Essais non destructifs des assemblages soudés - Technique ultrasons multi-éléments (PAUT) - Niveaux d'acceptation
NF C20-428:1981 Provisional Requirements Tests Methods Basic Environmental Testing Procedures General Considerations on Ultrasonic Cleaning
NF EN 13100-3:2005 Contrôle non destructif des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 3 : contrôle par ultrasons

National Metrological Verification Regulations of the People's Republic of China, time ultrasonic probe

JJG(铁道) 156-1995 Verification Regulation of Ultrasonic Transducer
JJG(铁道) 130-2003 Verification Regulations for Rail Ultrasonic Flaw Detector
JJG(航天) 53-1988 Verification Regulations for Type A Pulse Reflection Ultrasonic Flaw Detector

CZ-CSN, time ultrasonic probe

CSN 35 6884-1973 Ultrasonic testing. Ultrasound probe
CSN IEC 1012:1995 Filters for the measurement of audible sound in the presence of ultrasound
CSN 36 4860-1975 Ultrasonic protes for medical diagnosing

Korean Agency for Technology and Standards (KATS), time ultrasonic probe

KS D 0250-2001(2016) Ultrasonic examination for steel pipes and tubes
KS D 0250-1982 Ultrasonic examination for steel pipes and tubes
KS B 0535-1995 Method for measurement ox perforemance characteristics of ultrasonic probes
KS B ISO 10375:2008 Non-destructive testing－Ultrasonic inspection－Characterization of search unit and sound field
KS B 0535-2005 Method for measurement ox performancecharacteristics of ultrasonic probes
KS B 0535-2005(2015) Method for measurement ox performancecharacteristics of ultrasonic probes
KS B 0534-2000 Method for assessing the overall performance characteristicsof ultrasonic pulse echo testing instrument
KS B 0896-1999 Method for ultrasonic examination for welds of ferritic steel
KS B 0896-2014 Method for ultrasonic examination for welds of ferritic steel
KS B 0896-1977 Method for ultrasonic examination for welds of ferritic steel
KS B 0537-2005 Methods for assessing the electrical characteristics ofultrasonic testing instrument using pulse echo technique
KS B 0522-1999(2009) Methods of ultrasonic examinationfor T type welds of aluminium plates
KS B 0521-1999(2009) Methods of ultrasonic angle beam examinationfor welds of aluminium pipes and tubes
KS B ISO 16828:2014 Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
KS B ISO 12715:2018 Non-destructive testing — Ultrasonic testing — Reference blocks and test procedures for the characterization of contact probe sound beams
KS B 0537-1995 Methods for assessing the electrical characteristics of ultrasonic testing instrument using pulse echo technique
KS B 0522-1999 Methods of ultrasonic examinationfor T type welds of aluminium plates
KS B ISO 7963:2002 Welds in steel－Calibration block No.2 for ultrasonic examination of welds
KS B 0521-1999 Methods of ultrasonic angle beam examinationfor welds of aluminium pipes and tubes
KS B 0897-2014 Methods of ultrasonic angle beam examination for butt welds of aluminium plates
KS B 0897-1999 Methods of ultrasonic angle beam examinationfor butt welds of aluminium plates
KS B ISO 6416:2021 Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method
KS B 0839-2006(2016) Methods and acceptance criteria of ultrasonic examination forgas pressure welds of reinforcing deformed bars
KS B 0817-2006 General rule of ultrasonic testing of metals by pulse echo technique
KS B 0544-2021 Standard qualification procedure for ultrasonic testing technique of aluminium and aluminium alloy welds
KS C 6117-1999 Alarm systems-Part 2：Requirements for intruder alarm systems-Section Four-Ultrasonic Doppler detectors for use in buildings
KS B ISO 10863:2014 Non-destructive testing of welds — Use of time-of-flight diffraction technique(TOFD)
KS D ISO 10332-2002(2018)
KS B ISO TR 12765-2005(2020) Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
KS B ISO 10863:2019 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique(TOFD)
KS B 0544-2005 Standard qualification procedure for ultrasonic testingtechnique of aluminium and aluminium alloy welds
KS C IEC 62642-2-5:2017 Alarm systems — Intrusion and hold-up systems — Part 2-5: Intrusion detectors — Combined passive infrared/Ultrasonic
KS C IEC 62642-2-5-2017(2022) Alarm systems — Intrusion and hold-up systems — Part 2-5: Intrusion detectors — Combined passive infrared/Ultrasonic

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, time ultrasonic probe

GB 10408.2-1989 Ultrasonic intrusion detectors
GB/T 28426-2012 Rail flaw detection vehicle
GB/T 13316-1991 Method of ultrasonic inspection for cast steel rolls
GB/T 7734-1987 Method for ultrasonic testing of clad steel plates
GB/T 8651-2015 Flaw detection method by the ultrasonic plate wave for metal plates
GB/T 3310-1999 Copper alloy bars-ultrasonic testing method
GB/T 8651-2002 Metal plates-Flaw detection method by the ultrasonic plate wave
GB/T 8361-2001 The surface of cold drawn rounds steel--Method for the ultrasonic inspection
GB/T 5777-1996 Seamless steel pipe and tubing--Methods for ultrasonic testing
GB/T 5777-2008 Ultrasonic testing method for seamless steel pipe
GB/T 13315-1991 Method of ultrasonic inspection for forged steel cold rolling working rolls
GB/T 12969.1-2007 Method of ultrasoic inspection for titanium and titanium alloy tubes
GB/T 3310-2010 Ultrasonic testing method of copper and copper alloy bars
GB/T 11345-1989 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
GB 10408.7-1996 Combination ultrasonic & passive infrared intrusion detector
GB 5193-1985 Method of ultrasonic inspection for wrought titanium and titanium alloy products
GB/T 5193-1985 Method of ultrasonic inspection for wrought titanium and titanium alloy products
GB/T 5193-2007 Method of ultrasonic inspection for wrought titanium and titanium alloy products
GB/T 18694-2002 Non-destructivetesting--Ultrasonic inspection--Characterization of search unit and sound field
GB 10408.2-2000 Detectors for intruder alarm systems. Part 2: Ultrasonic doppler detectors for use in buildings
GB/T 18852-2002 Ultrasonic non-destructive testing--Reference blocks and test procedures for the characterization of contact search unit beam profiles
GB/T 15830-1995 Method of ultrasonic inspetion and result classification of circumferential butt welds in steel pipes and tubes
GB/T 27664.2-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 2:Probes
GB/T 42399.2-2023 Nondestructive Testing Instruments Performance and Inspection of Phased Array Ultrasonic Equipment Part 2: Probes

Professional Standard - Ferrous Metallurgy, time ultrasonic probe

YB/T 951-2003 Method of the ultrasonic inspection for rails
YB/T 951-2014 Method of the ultrasonic testing for rails
YB/T 951-1981 Rail Ultrasonic Flaw Detection Method
YB 4094-1993 Ultrasonic flaw detection method of square steel (billet) for shells
YB/T 036.10-1992 Ultrasonic flaw detection method for steel forgings in general technical conditions for metallurgical equipment manufacturing

国家药监局, time ultrasonic probe

YY/T 1671-2020 Ultrasound probe puncture stand

RO-ASRO, time ultrasonic probe

STAS R 12500/2-1987 ULTRASONIC FAULT DETECTION CALIBRATION AND ADJUSTMENT OF ULTRASONIC FA DL DETECTORS
STAS 6914-1990 Acoustic non-destructive control. Ultrasonic fault detertion. Terminology
STAS 12798/1-1990 Ultrasonic fault detection. Control of steel castings
STAS 12798/2-1990 Ultrasonic fault detection. Control of steel forgings
STAS R 12500/1-1987 ULTRASONIC FLAW DETECTION Checking up methods of flaw detection equipments having in view aecepteuce
STAS 9552-1987 Ultrasonic fault detection MANUAL EXAMINATION OF FUSE WELDING JOINTS
STAS SR ISO 9765:1994 Submerged arc-welded steel tubes for pressure purposes. Ultrasonic testing of the weld seam for ?he detection of longitudinal and/or transverse imperfections

Professional Standard - Machinery, time ultrasonic probe

JB/T 11276-2012 Non-destructive testing instruments.Nomenclatures for models of probes in ultrasonic
JB/T 8931-1999 Ultrasonic examination for cladding
JB/T 8467-1996 Supersonic flaw detection method for steel forgings
JB/T 9674-1999 Ultrasonic test for detecting internal defects in ceramic
JB/T 10062-1999 Testing methods for performance of probes used in ultrasonic flaw detection
JB/T 7524-1994 Ultrasonic flaw detection of welding seam in building steel structure
JB/T 9212-1999 Ultrasonic flaw detection of welds on steel oil tanks
JB/T 5440-1991 Ultrasonic flaw detection of forged steel component of compressor
JB/T 5441-1991 Ultrasonic flaw detection of casting steel component of compressor
JB/T 4008-1999 Recommended practice for immersed ultrasonic testing by the reflection method using pulsed longitudinal waves
JB/T 4009-1999 Recommended practice for ultrasonic pulse-echo straight-beam tesing by the contact method
JB/T 1582-1996 Ultrasonic flaw detection of impeller forgings of turbine
JB/T 4010-2006 Ultrasonic examination standard for tile steel retaining rings of turbine Generator
JB/T 12466-2015 Non-destructive testing.Specification for ultrasonic probes
JB/T 7367.1-2000 Non-destructive ultrasonic testing method of coiled helical compression springs
JB/T 5439-1991 Ultrasonic flaw detection of nodular cast iron component of compressor
JB/T 5093-1991 Specifications for Ultrasonic Flaw Detection of Friction Welded Valves of Internal Combustion Engines
JB/T 9630.2-1999 Ultrasonic testing and quality classification methods of steel castings for steam turbines
JB/T 10061-1999 Commonly used specification for A-mode ultrasonic flaw detector using pulse echo technique
JB/T 11731-2013 Non-destructive testing.General specification for ultrasonic phased array probe
JB/T 1581-1996 Ultrasonic flaw detection of rotor and main shaft forgings of the turbine and turbogenerator

Professional Standard-Ships, time ultrasonic probe

CB/T 3907-1999 Ultrasonic crack detection of marine steel forgings
CB 1134-1985 Ultrasonic Flaw Detection Method for BFe30-1-1 Pipe
CB/Z 211-1984 Technical specification for ultrasonic flaw detection of marine metal composite materials
CB/T 3559-1994 Manual Ultrasonic Flaw Detection Technology and Quality Grading of Ship Steel Weld Seam

U.S. Military Regulations and Norms, time ultrasonic probe

ARMY UFGS-05 05 23.13 10-2008 ULTRASONIC INSPECTION OF WELDMENTS

Japanese Industrial Standards Committee (JISC), time ultrasonic probe

JIS G 0582:2004 Ultrasonic examination for steel pipes and tubes
JIS G 0582:2012 Automated ultrasonic examination of steel pipes and tubes
JIS G 0582:1990 Ultrasonic examination for steel pipes and tubes
JIS G 0584:2004 Ultrasonic examination for arc welded steel pipes
JIS G 0584:2014 Ultrasonic examination for arc welded steel pipes
JIS G 0582 AMD 1:2015 Automated ultrasonic examination of steel pipes and tubes (Amendment 1)
JIS Z 2350:1992 Method for measurement of performance characteristics of ultrasonic probes
JIS Z 2350:2002 Method for measurement of performance characteristics of ultrasonic probes
JIS G 0584:1990 Ultrasonic examination for arc welded steel pipes
JIS T 1506:2005 Ultrasonics -- Hand-held probe Doppler foetal heartbeat detectors -- Performance requirements and methods of measurement and reporting
JIS T 1506:2018 Ultrasonics -- Hand-held probe Doppler foetal heartbeat detectors -- Performance requirements and methods of measurement and reporting
JIS Z 3062:2014 Method and acceptance criteria of ultrasonic examination for gas pressure welds of deformed steel bars for concrete reinforcement

Professional Standard - Electricity, time ultrasonic probe

DL/T 718-2000 The ultrasonic inspection method for casting tee joint and elbow in power plant
DL/T 505-2005 The guide of ultrasonic inspection for welding of steam turbine shaft
DL/T 820.3-2020 Technical regulations for ultrasonic testing of pipe welded joints Part 3: Diffraction time-of-flight method
DL/T 820-2002 The code of ultrasonic inspection section for butt welds of pipes
DL/T 718-2014 The ultrasonic inspection method for elbow and tee joint in fossil-fuel power plant
DL/T 542-2014 Methods of ultrasonic testing and assessment of measuring results for T-Joints fillet fusion welded in steel
DL/T 1317-2014 The code of ultrasonic time of flight diffraction technique for butt welds in fossil-fuel power plant
DL/T 542-1994 Methods of Ultrasonic Testing and Classification of Measuring Results for T-Joints Fillet Fusion Welded in Steel
DL/T 820.4-2020 Technical regulations for ultrasonic testing of pipe welded joints Part 4: In-service testing

National Metrological Technical Specifications of the People's Republic of China, time ultrasonic probe

JJF 1487-2014 Calibration Specification for Blocks used in Ultrasonic Testing
JJF 1447-2014 Calibration Specification for Ultrasonic Flaw Detectors by Time-of-Flight Diffraction
JJF 1862-2020 Calibration Specification for Large Multi-channel Ultrasonic Flaw Detectors

Society of Automotive Engineers (SAE), time ultrasonic probe

SAE AMS-STD-2154-1998 Inspection, Ultrasonic, Wrought Metals, Process for

RU-GOST R, time ultrasonic probe

GOST 14782-1986 Nondestructive testing. Welded joints. Ultrasonic methods
GOST 17410-1978 Non-destructive testing. Metal seamless cylindrical pipes and tubes. Ultrasonic methods of defekt detection
GOST 18576-1996 Nondestructive testing. Railway rails. Ultrasonic testing methods
GOST R 52731-2007 Non-destructive testing. Stress evaluation by ultrasound. General requirements
GOST R 55809-2013 Non-destructive testing. Ultrasonic flaw detectors. Methods of measuring the main parameters
GOST 24507-1980 Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST R 53568-2009 Non-destructive testing. Evaluation of third order elasticity modulus by ultrasound. General requirements
GOST R 55150-2012 Combined passive infrared ultrasonic intrusion detectors for use in buildings. General technical requirements and test methods
GOST R 50.05.04-2018 Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of austenitic steel welded joints
GOST R 8.847-2013 State system for ensuring the uniformity of measurements. Ultrasonic pulse flaw detectors. Methods and means for verification

British Standards Institution (BSI), time ultrasonic probe

BS EN 12668-2:2001 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Probes
BS EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Probes
BS EN ISO 22232-2:2020 Non-destructive testing. Characterization and verification of ultrasonic test equipment - Probes
12/30246414 DC BS ISO 12715. Non-destructive testing. Ultrasonic testing. Reference blocks and test procedures for the characterization of contact probe sound beams
PD IEC TR 61390:2022 Tracked Changes. Ultrasonics. Real-time pulse-echo systems. Test procedures to determine performance specifications
BS EN 1289:1998 Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels
BS 4331-3:1974 Methods for assessing the performance characteristics of ultrasonic flaw detection equipment. Guidance on the in-service monitoring of probes (excluding immersion probes)
BS EN 61266:1995 Ultrasonics. Hand-held probe Doppler foetal heartbeat detectors. Performance requirements and methods of measurement and reporting
BS EN ISO 18563-2:2017 Non-destructive testing. Characterization and verification of ultrasonic phased array equipment. Probes
BS EN 16392-2:2014 Non-destructive testing. Characterisation and verification of ultrasonic phased array equipment. Probes
BS 7887:1997 Ultrasonics - Real-time pulse-echo systems - Guide for test procedures to determine performance specifications
BS EN ISO 10863:2011 Non-destructive testing of Welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS EN ISO 6416:2017 Tracked Changes. Hydrometry. Measurement of discharge by the ultrasonic transit time (time of flight) method
BS EN ISO 10893-8:2011 Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
BS ISO 12242:2012 Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid
BS EN ISO 16828:2014 Non-destructive testing. Ultrasonic testing. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
BS EN ISO 10863:2020 Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS EN 50131-2-5:2008 Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors
BS DD CLC/TS 50131-2-5:2004 Alarm systems - Intrusion systems - Requirements for combined passive infrared and ultrasonic detectors
BS 4737-3.5:1978 Intruder alarm systems - Specifications for components - Ultrasonic movement detectors
BS EN ISO 22825:2006 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
BS ISO/TR 12765:1998 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
18/30373433 DC BS ENISO 10863. Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
BS EN 10246-8:2000 Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
BS 7706:1993 Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for the detection, location and sizing of flaws
BS EN 10246-6:2000 Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
18/30363678 DC BS EN ISO 22232-2. Non-destructive testing. Characterization and verification of ultrasonic test equipment. Part 2. Probes

国家铁路局, time ultrasonic probe

TB/T 3568.3-2021 Railway nondestructive testing materials Part 3: Ultrasonic testing probes

Professional Standard - Military and Civilian Products, time ultrasonic probe

WJ 2545-1999 Ultrasonic Flaw Detection of Cannon Barrel Contact Method
WJ 1922-1990 Ultrasonic Automatic Flaw Detection Method for Steel Cartridge of Small Caliber Shell
WJ 1956-1990 Gunpowder Performance Test Method Ultrasonic Flaw Detection of Double Base Single Hole Tubular Powder Column

Professional Standard - Non-ferrous Metal, time ultrasonic probe

YS/T 1000-2014 Longitudinal wave method of ultrasonic inspection for copper and copper alloys tubes
YS/T 585-2006 Method of ultrasonic inspection for copper and copper alloys plats
YS/T 585-2013 Method of ultrasonic inspection for copper and copper alloys plates

IN-BIS, time ultrasonic probe

UNKNOWN, time ultrasonic probe

Professional Standard - Aviation, time ultrasonic probe

HB/Z 74-1983 Instructions for Ultrasonic Flaw Detection of Aviation Aluminum Forgings
HB 5169-1981 Ultrasonic Flaw Detection Method for Platinum-Iridium-25 Alloy Sheet

Group Standards of the People's Republic of China, time ultrasonic probe

T/CSBME 049-2022 Reliability test methods for ultrasonic transducer
T/SHZSAQS 00118-2022 Digital Ultrasonic Flaw Detector Operating Technical Regulations
T/JSGT 003-2020 Exhaust gas velocity and flow monitoring Ultrasonic time difference method
T/CSBME 031-2021 Specification for disinfection and storage of transesophageal echocardiography probe
T/CIDA 0010-2022 Ultrasonic time difference method layer flow in open channel flow measurement device
T/CSTM 00666-2023 Non-destructive testing –Steel products –Ultrasonic testing method for steel ingot

American Society for Testing and Materials (ASTM), time ultrasonic probe

ASTM E114-10 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
ASTM A435/A435M-17 Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM E1065-99 Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
ASTM E1065-99(2003) Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
ASTM E1065/E1065M-14 Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
ASTM E1065-08 Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
ASTM E1001-99a Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
ASTM A578/A578M-07(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
ASTM A578/A578M-17 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
ASTM E2373/E2373M-19 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM E2904-22 Standard Practice for Characterization and Verification of Linear Phased Array Ultrasonic Probes
ASTM E1001-11 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
ASTM E1495/E1495M-17 Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
ASTM E1001-04 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
ASTM E2700-20 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
ASTM E3044/E3044M-22 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints
ASTM E3044/E3044M-16 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints
ASTM E3044/E3044M-16e1 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints
ASTM E214-68(1996) Standard Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed Longitudinal Waves
ASTM E214-01 Standard Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed Longitudinal Waves
ASTM E3167/E3167M-18 Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints

International Organization for Standardization (ISO), time ultrasonic probe

ISO 16823:2012 Non-destructive testing - Ultrasonic testing - Transmission technique
ISO 12715:2014 Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams
ISO 16828:2012 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
ISO 11666:2010 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
ISO 7963:1985 Welds in steel; Calibration block No. 2 for ultrasonic examination of welds
ISO 2400:1972 Welds in steel; Reference block for the calibration of equipment for ultrasonic examination
ISO 6416:2017 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method
ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
ISO 12242:2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid
ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)
ISO 17640:2005 Non-destructive testing of welds - Ultrasonic testing of welded joints
ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
ISO 16826:2012 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface
ISO 22232-2:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
ISO/CD 18563-2:2023 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Probes
ISO 10863:2020 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
ISO/DIS 18563-2:2011 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Array probes

Professional Standard - Construction Industry, time ultrasonic probe

JG/T 203-2007 Method for ultrasonic testing and classification for steel structures
JG/T 3034.1-1996 Methods for ultrasonic testing and classification of welds for steel space grid structures with welded joints
JG/T 3034.2-1996 Methods for ultrasonic testing and classification of welds for steel space grid structures with bolted joints

国家能源局, time ultrasonic probe

NB/T 42068-2016 Ultrasonic flaw detection of screw expander main engine and rotor

未注明发布机构, time ultrasonic probe

BS 4331-3:1974(1999) Methods for Assessing the performance characteristics of ultrasonic flaw detection equipment — Part 3 : Guidance on the in - service monitoring of probes (excluding immersion probes)
DIN EN 12668-2-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 2: Probes
BS EN 1714:1998(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints
DIN EN 1714:2002 Non-destructive testing of welded joints – ultrasonic testing of welded joints
BS 4331-2:1972(1999) Methods Assessing the performance characteristics of ultrasonic flaw detection equipment — Part 2 : Electrical performance
BS EN 1712:1997(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints — Acceptance levels
DIN EN 1712:2002 Non-destructive testing of welded joints – Ultrasonic testing of welded joints – Acceptability limits
BS 4331-1:1978(1999) Methods for Assessing the performance characteristics of ultrasonic flaw detection equipment — Part 1 : Overall performance : on - site methods

Shanghai Provincial Standard of the People's Republic of China, time ultrasonic probe

DB31/T 1343-2022

European Committee for Standardization (CEN), time ultrasonic probe

EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
DD ENV 583-6-2000 Non-Destructive Testing - Ultrasonic Examination - Part 6: Time-Of-Flight Diffraction Technique as a Method for Detection and Sizing of Discontinuities
EN 1714:1997/A1:2002 Non-Destructive Testing of Welds - Ultrasonic Testing of Welded Joints Ratified European Text
EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) [Superseded: CEN CEN/TS 14751]
EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
EN 583-6:2008 Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
EN 1714:1997 Non-destructive testing of welds Ultrasonic testing of welded joints Incorporates Amendments A1:2002 and A2:2003
EN 1289:1998/A1:2002 AMD 1 Non-Destructive Testing of Welds - Penetrant Testing of Welds - Acceptance Levels Ratified European Text
EN 16392-2:2014 Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2: Probes
prEN ISO 18563-2 rev Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes
EN 1289:1998 Non-destructive testing of welds Penetrant testing of welds Acceptance levels Includes amendments A1: 2002 and A2:2003

Danish Standards Foundation, time ultrasonic probe

DS/EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
DS/EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD)

Lithuanian Standards Office , time ultrasonic probe

LST EN 12668-2-2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
LST EN 61266-2001 Ultrasonics. Hand-held probe Doppler foetal heartbeat detectors. Performance requirements and methods of measurement and reporting (IEC 61266:1994)
LST EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
LST EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012)
LST EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011)

IT-UNI, time ultrasonic probe

UNI EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes

AENOR, time ultrasonic probe

UNE-EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
UNE-EN 61266:1996 ULTRASONICS. HAND-HELD PROBE DOPPLER FOETAL HEARTBEAT DETECTORS. PERFORMANCE REQUIREMENTS AND METHODS OF MEASUREMENT AND REPORTING.
UNE-EN 16392-2:2014 Non-destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2: Probes
UNE-EN ISO 10863:2012 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011)

ES-UNE, time ultrasonic probe

UNE-EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
UNE-EN ISO 18563-2:2018 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017)
UNE-EN ISO 6416:2018 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)
UNE-EN ISO 10863:2021 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)

German Institute for Standardization, time ultrasonic probe

DIN EN ISO 22232-2:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020); German version EN ISO 22232-2:2020
DIN EN ISO 22232-2:2018 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO/DIS 22232-2:2018); German and English version prEN ISO 22232-2:2018
DIN EN ISO 18563-2:2017-12 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017); German version EN ISO 18563-2:2017
DIN EN ISO 6416:2019-03 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017); German version EN ISO 6416:2017
DIN EN 3718:2012-08 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes; German and English version EN 3718:2012
DIN EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes; German version EN 12668-2:2010
DIN EN 583-6:2009 Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities; English version of DIN EN 583-6:2009-03
DIN EN ISO 6416:2019 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)
DIN EN 61266:1996-06 Ultrasonics - Hand-held probe doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting (IEC 61266:1994); German version EN 61266:1995
DIN EN ISO 10863:2020-09 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020); German version EN ISO 10863:2020
DIN EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020); German version EN ISO 22232-2:2020
DIN EN ISO 10863:2020 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
DIN EN 61266:1996 Ultrasonics - Hand-held probe doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting (IEC 61266:1994); German version EN 61266:1995
DIN EN ISO 18563-2:2017 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017)

PL-PKN, time ultrasonic probe

PN M70055-02-1989 Welding Ultrasonic testing of welded joints Testing of butt welds 8÷30 mm thick, with angle probes and with transverse waves
PN-EN ISO 22232-2-2021-03 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 2: Probes (ISO 22232-2:2020)
PN M70055-01-1989 Welding Ultrasonic testing of welded joints General specifications
PN E08390-24-1993 Alarm systems. Requirements for intruder alarm systems. Ultrasonic Doppler detectors for use in buildings
PN M69777-1989 Welding Defectivenes classification of welded joints on the basis of ultrasonic tests
PN-EN ISO 10863-2020-12 E Non-destructive testing of welds -- Ultrasonic testing -- Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)

KR-KS, time ultrasonic probe

KS B ISO 12715-2018 Non-destructive testing — Ultrasonic testing — Reference blocks and test procedures for the characterization of contact probe sound beams
KS B ISO 6416-2021 Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method
KS B ISO 10863-2019 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique(TOFD)
KS D ISO 10332-2002(2023)

ZA-SANS, time ultrasonic probe

SANS 396:2004 Non-destructive testing - Ultrasonic inspection - Characterization of search unit and sound field
SANS 12715:2004 Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles

Professional Standard - Nuclear Industry, time ultrasonic probe

EJ/T 768-1993 Ultrasonic flaw detection method and flaw detection result classification of nuclear grade container overlay welding layer
EJ/T 958-1995 Ultrasonic longitudinal wave flaw detection method and acceptance criteria for nuclear shielded gray iron castings

Professional Standard - Petroleum, time ultrasonic probe

SY/T 5446-1992 Non-destructive testing method for oil well pipes Ultrasonic flaw detection of drill pipe welds
SY/T 6755-2016 Specification for inspecting butt joints of in-service oil and gas pipelines with ultrasonic phased array and multi-probes
SY/T 6755-2009 Inspection of butt joints of in-service oil and natural gas pipeline by ultrasonic phased and multi-probes
SY 6755-2016 Ultrasonic phased array and multi-probe detection of butt joints of in-service oil and gas pipelines
SY/T 4065-1993 Methods for ultrasonic inspection and quality classification of welded girth butt joints in oil and gas steel pipelines

Professional Standard - Medicine, time ultrasonic probe

YY/T 0703-2008 Ultrasonics.Real-time pulse-echo systems.Test procedures to determine performance specifications
YY/T 1142-2013 Methods of measuring the frequency of medical ultrasonic equipment and probe
YY/T 0906-2013 Performance testing methods for B-mode ultrasonic diagnostic equipment with intra-cavity probe

AT-ON, time ultrasonic probe

OENORM EN ISO 22232-2:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)

CH-SNV, time ultrasonic probe

SN EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)

VN-TCVN, time ultrasonic probe

TCVN 1548-1987 Non.destructive testing for welded joints.Ultrasonic methods

AWS - American Welding Society, time ultrasonic probe

C3.8-1990 Recommended Practices for Ultrasonic Inspection of Brazed Joints
C3.8M/C3.8-2011 SPECIFICATION FOR THE ULTRASONIC PULSE-ECHO EXAMINATION OF BRAZED JOINTS (3rd Edition)

Military Standard of the People's Republic of China-General Armament Department, time ultrasonic probe

GJB 1076-1991 Ultrasonic flaw detection method of tungsten-based high-density alloy rods for armor-piercing projectiles

American National Standards Institute （ANSI), time ultrasonic probe

ANSI/ASME MFC-5.1-2011 Measurement of Liquid Flow in Closed Conduits Using Transit Time Ultrasonic Flowmeters
ANSI/ASME MFC-5M-1985 Measurement of Liquid Flow in Closed Conduits using Transit-Time Ultrasonic Flowmeters

International Electrotechnical Commission (IEC), time ultrasonic probe

IEC TR 61390:1996 Ultrasonics - Real-time pulse-echo systems - Test procedures to determine performance specifications
IEC TR 61390:2022 Ultrasonics - Real-time pulse-echo systems - Test procedures to determine performance specifications
IEC TS 61390:1996 Ultrasonics - Real-time pulse-echo systems - Test procedures to determine performance specifications

American Welding Society (AWS), time ultrasonic probe

AWS C3.8-1990 Recommended Practices for Ultrasonic Inspection of Brazed Joints R(1998)

Professional Standard - Aerospace, time ultrasonic probe

QJ 2252-1992 Ultrasonic flaw detection method and quality classification standard for superalloy forgings
QJ 3197.2-2004 Non-destructive detection method for filament-wound chamber case of solid rocket motor --- Part 2:Ultrasonic detection
QJ 1657-1989 Ultrasonic Flaw Detection Method for Fiberglass Wound Combustion Chamber Shell of Solid Rocket Motor

Standard Association of Australia （SAA）, time ultrasonic probe

AS/NZS 4374:1996 Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting
AS 2207:2007 Non-destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel

American Society of Mechanical Engineers (ASME), time ultrasonic probe

ASME SEC V B SA-577/SA-577M-2001 Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates ASTM A577/A577M-90(R1996)
ASME MFC-5.1-2011(R2018) Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME MFC-5M-1985 Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME MFC-5.1-2011 Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters

API - American Petroleum Institute, time ultrasonic probe

API H00008-2002 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology (First Edition)

国家市场监督管理总局、中国国家标准化管理委员会, time ultrasonic probe

GB/T 18852-2020 Non-destructive testing—Ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams

Tianjin Provincial Standard of the People's Republic of China, time ultrasonic probe

DB12/T 861-2018 Ultrasonic testing method for circumferential cracks in high-pressure stud bolts
DB12/T 861-2019 Ultrasonic testing method for circumferential cracks in high-pressure stud bolts

Anhui Provincial Standard of the People's Republic of China, time ultrasonic probe

DB34/T 1711-2012 Ultrasonic testing method for circumferential cracks in high-pressure stud bolts
DB34/T 1711-2023 Ultrasonic detection method for circumferential cracks in threads of high-pressure stud bolts in service

工业和信息化部, time ultrasonic probe

JB/T 13767-2020 Non-destructive testing of welds Ultrasonic testing of laser welded lap joints of metal sheets

European Association of Aerospace Industries, time ultrasonic probe

AECMA PREN 4050-4-1993 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 4: Acceptance Criteria
AECMA PREN 4050-3-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 3: Reference Blocks Edition P 1
AECMA PREN 4050-1-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 1: General Requirements Edition P 1
AECMA PREN 4050-2-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 2: Performance of Test Edition P 1
AECMA PREN 4050-4-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 4: Acceptance Criteria Edition P 1

Association of German Mechanical Engineers, time ultrasonic probe

DVS 0704-1985 Recommendations for the evaluation of ultrasonic testing results of fusion welded joints according to DIN 8563 part 3

CENELEC - European Committee for Electrotechnical Standardization, time ultrasonic probe

CLC/TS 50131-2-5-2004 Alarm systems - Intrusion systems Part 2-5: Requirements for combined passive infrared and ultrasonic detectors