ZH
RU
ES

ppm and m3

ppm and m3, Total:108 items.

In the international standard classification, ppm and m3 involves: Commercial vehicles, Petroleum products in general, Freight distribution of goods, Installations in buildings, Special purpose vehicles, Protection of and in buildings, Shipbuilding and marine structures in general, Road vehicles in general, Passenger cars. Caravans and light trailers, Fluid storage devices, Cutting tools, Textile fibres, Metrology and measurement in general, Measurement of fluid flow.


ZA-SANS, ppm and m3

  • VC 8023-2005 MOTOR VEHICLES OF CATEGORY M2 AND M3
  • VC 8023-2010 Compulsory specification for motor vehicles of category M2 and M3
  • SANS 20107:2006 Uniform provisions concerning the approval of category M2 or M3 vehicles with regard to their general construction
  • SANS 20107:2009 Uniform provisions concerning the approval of category M2 or M3 vehicles with regard to their general construction
  • SANS 20052:2009 Uniform provisions concerning the approval of M2 and M3 small capacity vehicles with regard to their general construction

Instrument Society of America (ISA), ppm and m3

  • ISA RP92.06.02-1999 Installation, Operation, and Maintenance of Chlorine Detection Instruments (0.5-30 ppm Full Scale)
  • ISA RP92.03.02-1999 Installation, Operation, and Maintenance of Ammonia Detection Instruments (25-500 ppm Full Scale)
  • ISA RP92.02.02 PART II-1998 Installation, Operation, and Maintenance of Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)

Korean Agency for Technology and Standards (KATS), ppm and m3

  • KS M ISO 9770-2003(2008) Crude petroleum and petroleum products－Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1 074 kg/m3
  • KS M ISO 9770:2013 Crude petroleum and petroleum products－Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1 074 kg/m3

German Institute for Standardization, ppm and m3

  • DIN 30720-2:2009 Containers for multi-bucket system vehicles - Part 2: Containers with a nominal volume of 15 m<(hoch)3> and 20 m<(hoch)3>
  • DIN EN 15316-1:2017-09 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4; German version EN 15316-1:2017
  • DIN 30720-2:2016 Containers for multi-bucket system vehicles - Part 2: Standard containers with a nominal volume of 15 m3 and 20 m3
  • DIN EN 15316-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4; German version EN 15316-1:2017
  • DIN 65149:1980 Aerospace; screws of steel for non-structural components, M 3 and M 4, technical specification
  • DIN 2174:2008-11 Cold-forming taps for ISO metric coarse pitch thread M2 to M39 and ISO metric fine pitch thread M3 × 0,25 to M52 × 4 - Dimensions
  • DIN 2174:1998 Cold-forming taps for ISO metric coarse pitch thread M2 to M16 and ISO metric fine pitch thread M3 × 0,25 to M24 × 2 - Dimensions
  • DIN EN 15378-1:2017 Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11
  • DIN EN 15378-1:2017-09 Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11; German version EN 15378-1:2017
  • DIN EN 15378-3:2017 Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance, Module M3-10, M8-10
  • DIN EN 15378-3:2017-09 Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance, Module M3-10, M8-10; German version EN 15378-3:2017

Association Francaise de Normalisation, ppm and m3

  • NF EN 15316-1:2017 Performance énergétique des bâtiments - Méthode de calcul des exigences énergétiques et des rendements des systèmes - Partie 1 : généralités et expression de la performance, module M3-1, M3-4, M3-9, M8-1, M8-4
  • FD CEN/TR 15316-6-1:2018 Performance énergétique des bâtiments - Méthode de calcul des besoins énergétiques et des rendements des systèmes - Partie 6-1 : explication et justification de l'EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4
  • NF P52-617-1*NF EN 15316-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1 : general and energy performance expression, module M3-1, M3-4, M3-9, M8-1, M8-4
  • FD P52-617-6-1*FD CEN/TR 15316-6-1:2018 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-1 : explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4
  • NF M88-724:2010 LPG equipment and accessories - Inspection and requalification of LPG tanks greater than 13 m3.
  • NF ISO 2283:2000 Tarauds à machine, à queue longue, de diamètre nominal M3 à M24 et 1/8 in à 1 in - Tarauds à queue dégagée
  • NF E66-108*NF ISO 2283:2000 Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps
  • FD P52-319-2*FD CEN/TR 15378-2:2018 Energy performance of buildings - Heating systems and DHW in buildings - Part 2 : explanation and justification of EN 15378-1, Module M3-11 and M8-11
  • FD P52-319-4*FD CEN/TR 15378-4:2019 Energy performance of buildings - Heating systems and DHW in buildings - Part 4 : explanation and justification of EN 15378-3, Module M3-10, M8-10
  • FD CEN/TR 15378-4:2019 Performance énergétique des bâtiments - Performance énergétique mesurée - Partie 4 : explication et justification de l'EN 15378-3, Modules M3-10, M8-10
  • FD P51-612-2*FD CEN/TR 12831-2:2019 Energy performance of buildings - Method for calculation of the design heat load - Part 2 : explanation and justification of EN 12831-1, Module M3-3
  • FD CEN/TR 12831-2:2019 Performance énergétique des bâtiments - Méthode de calcul de la charge thermique nominale - Partie 2 : explication et justification de l'EN 12831-1, Module M3-3
  • NF P52-319-1*NF EN 15378-1:2017 Energy performance of buildings - Heating systems and DHW in buildings - Part 1 : inspection of boilers, heating systems and DHW, Module M3-11, M8-11
  • FD CEN/TR 15316-6-5:2018 Performance énergétique des bâtiments - Méthode de calcul des besoins énergétiques et des rendements de systèmes - Partie 6-5 : explication et justification de l'EN 15316-4-2, Module M3-8
  • NF P52-319-3*NF EN 15378-3:2017 Energy performance of buildings - Heating and DHW systems in buildings - Part 3 : measured energy performance, Module M3-10, M8-10
  • FD CEN/TR 15378-2:2018 Performance énergétique des bâtiments - Systèmes de chauffage et production d'eau chaude sanitaire dans les bâtiments - Partie 2 : explication et justification de l'EN 15378-1, Modules M3-11 et M8-11

U.S. Military Regulations and Norms, ppm and m3

European Committee for Standardization (CEN), ppm and m3

  • EN 15316-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression@ Module M3-1@ M3-4@ M3-9@ M8-1@ M8-4
  • PD CEN/TR 15316-6-1:2017 Energy performance of buildings- Method for calculation of system energy requirements and system efficiencies - Part 6-1: Explanation and justification of EN 15316-1@ Module M3-1@ M3-4@ M3-9@ M8-1@ M8-4
  • PD CEN/TR 15378-2:2017 Energy performance of buildings - Heating systems and DHW in buildings - Part 2: Explanation and justification of EN 15378-1@ Module M3-11 and M8-11
  • EN 15378-1:2017 Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers@ heating systems and DHW@ Module M3-11@ M8-11
  • CEN/TR 15378-4:2017 Energy performance of buildings - Heating systems and DHW in buildings - Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10
  • PD CEN/TR 15378-4:2017 Energy performance of buildings - Heating systems and DHW in buildings - Part 4: Explanation and justification of EN 15378-3@ Module M3-10@ M8-10
  • EN 15378-3:2017 Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance@ Module M3-10@ M8-10
  • PD CEN/TR 12831-2:2017 Energy performance of buildings - Method for calculation of the design heat load - Part 2: Explanation and justification of EN 12831-1@ Module M3-3

ES-UNE, ppm and m3

  • UNE-EN 15316-1:2018 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4
  • UNE-CEN/TR 15316-6-1:2017 Energy performance of buildings- Method for calculation of system energy requirements and system efficiencies - Part 6-1: Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4 (Endorsed by Asociación Española de Normalizaci...
  • UNE-CEN/TR 15378-2:2017 Energy performance of buildings - Heating systems and DHW in buildings - Part 2: Explanation and justification of EN 15378-1, Module M3-11 and M8-11 (Endorsed by Asociación Española de Normalización in May of 2017.)
  • UNE-CEN/TR 15378-4:2017 Energy performance of buildings - Heating systems and DHW in buildings - Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10 (Endorsed by Asociación Española de Normalización in June of 2017.)
  • UNE-CEN/TR 12831-2:2017 Energy performance of buildings - Method for calculation of the design heat load - Part 2: Explanation and justification of EN 12831-1, Module M3-3 (Endorsed by Asociación Española de Normalización in May of 2017.)
  • UNE-EN 15378-1:2018 Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11
  • UNE-EN 15378-3:2019 Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance, Module M3-10, M8-10

British Standards Institution (BSI), ppm and m3

  • BS EN 15316-1:2017 Tracked Changes. Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4
  • BS ISO 21963:2020 Ships and marine technology. Marine environment protection. Tanks and piping systems for facilitating 5 ppm oil-water separation
  • BS EN 15378-3:2017 Energy performance of buildings. Heating and DHW systems in buildings. Measured energy performance, Module M3-10, M8-10

SE-SIS, ppm and m3

  • SIS SS 2145-1990 ISO system of limits and fits — ISO tolerances m3 to m9 for shafts
  • SIS SS 2115-1990 ISO system of limits and fits — ISO tolerances M3 toM10 for holes

IN-BIS, ppm and m3

(U.S.) Ford Automotive Standards, ppm and m3

  • FORD WSS-M4J213-A5-2012 UNSATURATED POLYESTER LACQUER, LOW PPM WAX FREE, COLOUR CONCENTRATE, JAGUAR LAND ROVER ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4J213-A1-2012 UNSATURATED POLYESTER LACQUER, LOW PPM WAX FREE, JAGUAR, LAND ROVER ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4J213-A3-2012 UNSATURATED POLYESTER LACQUER, LOW PPM WAX FREE, DEFOAMER, JAGUAR LAND ROVER ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4J213-A9-2012 UNSATURATED POLYESTER LACQUER, LOW PPM WAX FREE INCREASED VISCOSITY, HOT SPRAY APPLICATION PRODUCT, JAGUAR LAND ROVER ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4J213-A5-2009 UNSATURATED POLYESTER LACQUER, LOW PPM WAX FREE, COLOUR CONCENTRATE, JAGUAR LAND ROVER ONLY ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4J213-A1
  • FORD WSS-M4J213-A9-2009 UNSATURATED POLYESTER LACQUER, LOW PPM WAX FREE INCREASED VISCOSITY, HOT SPRAY APPLICATION PRODUCT, JAGUAR LAND ROVER ONLY ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4J213-A1

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, ppm and m3

  • GB/T 43124-2023 Ships and Marine Technology Marine Environmental Protection Tanks and Piping Systems for 5 ppm Oil and Water Separation

CH-SNV, ppm and m3

AT-ON, ppm and m3

  • OENORM V 5119-2021 Snow chains for vehicles classes N2, N3, M2, M3, O3, O4 - Requirements and testing

International Organization for Standardization (ISO), ppm and m3

  • ISO 8051:1989 Long shank taps with nominal diameters from M3 to M10; taps with reinforced shank and recess
  • ISO 2283:2000 Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps

RU-GOST R, ppm and m3

  • GOST R 41.52-2005 Uniform provisions concerning the categories M2 and M3 small capacity vehicles with regard to their general construction
  • GOST R 41.52-2001 Uniform provisions concerning the construction of small capacity public services vehicles
  • GOST OIML R 111-1-2009 State system for ensuring the uniformity of measurements. Weights of classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3. Part 1. Metrological and technical requirements
  • GOST 8.145-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring volumetric flow of liquids within the range of 3·10 in minus 6 degree up to 10 m3/sec
  • GOST 8.373-1980 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volumetric flow of petroleum products within the range of 2,8·10 in minus 6 degree up to 2,8·10 in minus 2 degree m3/s
  • GOST 8.374-1980 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volumetric flow of water within the range of 2,8·10 in minus 8 degree up to 2,8·10 in minus 2 degree m3/sec

FI-SFS, ppm and m3

  • SFS 2740 S-1979 Above ground vertical,cylindrical steel tank for storage of flammable liquids.Volume>500m3.Requirements for material and design
  • SFS 2737 S-1979 Above ground vertical,cylindrical steel tank for storage of flammable liquids.Volum≤ 500 m3 .Requirements for material and design
  • SFS 2737-1974
  • SFS 2740-1975

IT-UNI, ppm and m3

  • UNI 6546-1969 Glass fibre materials for thermal and acoustical insulation. Resin bonded slabs (density greater or equal to 40 kg/mm3). Determination of the bending strength.
  • UNI 6547-1969

CZ-CSN, ppm and m3

  • CSN 14 0618-1992 Hermetic refrigerating compressors up to 560 cm3. s -1 (2,0 m3. h -1) Technical requirements on construction, refrige-rating technique and method of tests

  ppm and m3, carbon monoxide ppm and mg, kg and m3, micrograms per gram and ppm, micrograms per cubic meter and ppm, m3 and ml, m3/h and m3/s, milligram cubic meters and ppm, mg and m3, ppm and micrograms, ppm and ml.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved